diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/checkmk-agent/checkmk.inc | 338 | ||||
| -rw-r--r-- | config/checkmk-agent/checkmk.xml | 41 | ||||
| -rw-r--r-- | config/checkmk-agent/checkmk_sync.xml | 108 |
3 files changed, 273 insertions, 214 deletions
diff --git a/config/checkmk-agent/checkmk.inc b/config/checkmk-agent/checkmk.inc index 67d82e6b..1ab92400 100644 --- a/config/checkmk-agent/checkmk.inc +++ b/config/checkmk-agent/checkmk.inc @@ -27,10 +27,11 @@ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +require_once("filter.inc"); +require_once("pfsense-utils.inc"); +require_once("util.inc"); + define('ETC_SERVICES', '/etc/services'); -define('ETC_INETD', '/etc/inetd.conf'); -define('ETC_HOSTS_ALLOW', '/etc/hosts.allow'); -define('ETC_RC_CONF', '/etc/rc.conf.local'); function checkmk_install() { /* @@ -39,24 +40,62 @@ function checkmk_install() { */ $checkmk_bin = "/usr/local/bin/check_mk_agent"; $checkmk_url = 'http://git.mathias-kettner.de/git/?p=check_mk.git;a=blob_plain;f=agents/check_mk_agent.freebsd;hb=e13899bde8bdafe13780427811c8153c59be807f'; - mwexec("fetch -o {$checkmk_bin} \"{$checkmk_url}\""); + mwexec("/usr/bin/fetch -o {$checkmk_bin} \"{$checkmk_url}\""); chmod($checkmk_bin, 0755); - sync_package_checkmk(); + /* Detect possible junk left over after previous bad package versions */ + checkmk_decrapify(); +} + +function checkmk_deinstall() { + /* Remove entry from /etc/services file */ + checkmk_cleanup_etc_services_file(); + /* Remove check_mk_agent script fetched via checkmk_install() */ + unlink_if_exists("/usr/local/bin/check_mk_agent"); + /* Detect possible junk left over after previous bad package versions */ + checkmk_decrapify(); +} + +function checkmk_decrapify() { + $i = 0; + if (exec("/usr/bin/wc -l /etc/hosts.allow | /usr/bin/awk '{ print $1 }'") > 5) { + log_error("[check_mk-agent] Possibly redundant lines found in /etc/hosts.allow."); + $i++; + } + if (exec("/usr/bin/wc -l /etc/inetd.conf | /usr/bin/awk '{ print $1 }'") > 1) { + log_error("[check_mk-agent] Possibly redundant lines found in /etc/inetd.conf."); + $i++; + } + if (file_exists("/etc/rc.conf.local")) { + log_error("[check_mk-agent] /etc/rc.conf.local file found; this file does not exist normally on pfSense."); + $i++; + } + if ($i > 0) { + log_error("[check_mk-agent] Inconsistent configuration files; possibly caused by previous check_mk package versions."); + log_error("[check_mk-agent] Please, compare those against default distribution files at https://github.com/pfsense/pfsense and fix as required manually."); + file_notice("check_mk-agent", "Inconsistent configuration files found, possibly caused by previous check_mk package versions. See Status - System Logs - General for details.", "Packages", ""); + } } function checkmk_text_area_decode($text) { return preg_replace('/\r\n/', "\n", base64_decode($text)); } +function checkmk_cleanup_etc_services_file() { + preg_match_all("/check_mk.*/", file_get_contents(ETC_SERVICES), $matches); + foreach ($matches[0] as $match => $value) { + if (!empty($value)) { + remove_text_from_file(ETC_SERVICES, "{$value}\n"); + } + } +} + function sync_package_checkmk() { global $config, $g, $mk_config; - $update_conf = 0; if (!is_array($config['installedpackages']['checkmk']['config'])) { return; } - $mk_config = $config['installedpackages']['checkmk']['config'][0]; $checkmk_bin = "/usr/local/bin/check_mk_agent"; @@ -71,193 +110,200 @@ function sync_package_checkmk() { conf_mount_rw(); - - /* Check services file. */ - $mk_services = file(ETC_SERVICES); + /* Check /etc/services file; remove any previous entries first since port could have changed */ + checkmk_cleanup_etc_services_file(); $port = ($mk_config['checkmkport'] ? $mk_config['checkmkport'] : "6556"); - foreach ($mk_services as $mk_service) { - if (!preg_match("/check_mk/", $mk_service)) { - $mk_service_file.=chop($mk_service)."\n"; - } - } - if ($mk_config['checkmkenable']=="on") { - $mk_service_file .= "check_mk {$port}/tcp #check_mk agent\n"; - file_put_contents(ETC_SERVICES, $mk_service_file, LOCK_EX); - } - - /* Check inetd file. */ - $mk_inetds = file(ETC_INETD); - foreach ($mk_inetds as $mk_inetd) { - if (!preg_match("/check_mk/",$mk_inetd)) { - $mk_inetd_file.=chop($mk_inetd)."\n"; - } - } - if ($mk_config['checkmkenable']=="on") { - $mk_inetd_file .= "check_mk stream tcp nowait root /usr/local/bin/check_mk_agent check_mk\n"; - } - file_put_contents(ETC_INETD, $mk_inetd_file, LOCK_EX); - - /* Check hosts.allow file. */ - $mk_hosts = file(ETC_HOSTS_ALLOW); - $inet_daemons_count = 0; - foreach ($mk_hosts as $mk_host) { - if (!preg_match("/check_mk/",$mk_host)) { - $mk_hosts_file .= chop($mk_host) . "\n"; - } - if (preg_match("/^\w+/")) { - $inet_daemons_count++; - } - } if ($mk_config['checkmkenable'] == "on") { - foreach (explode(',',$mk_config['checkmkhosts']) as $check_mk_host) { - $mk_hosts_file .= "check_mk : {$check_mk_host} : allow\n"; - $inet_daemons_count++; - } + $mk_service_file = "check_mk {$port}/tcp #check_mk agent\n"; + add_text_to_file(ETC_SERVICES, $mk_service_file); } - file_put_contents(ETC_HOSTS_ALLOW, $mk_hosts_file, LOCK_EX); - /* Check inetd daemon rc_conf option. */ - $mk_rc_confs= file(ETC_RC_CONF); - foreach ($mk_rc_confs as $mk_rc_conf) { - if (!preg_match("/inetd_/",$mk_rc_conf)) { - $mk_rc_conf_file .= chop($mk_rc_conf)."\n"; + conf_mount_ro(); + + /* Run XMLRPC sync if not booting */ + if (function_exists("platform_booting")) { + if (platform_booting()) { + return; } + } elseif ($g['booting']) { + return; + } else { + checkmk_sync_on_changes(); } - if ($mk_config['checkmkenable']=="on") { - $mk_rc_conf_file .= 'inetd_enable="YES"' . "\n"; - $mk_rc_conf_file .= 'inetd_flags="-wW"' . "\n"; - } +} - file_put_contents(ETC_RC_CONF, $mk_rc_conf_file, LOCK_EX); - if ($inet_daemons_count > 0) { - mwexec("/etc/rc.d/inetd restart"); +function checkmk_generate_rules($type) { + global $config; + + if (is_array($config['installedpackages']['checkmk']['config'])) { + $mk_config = $config['installedpackages']['checkmk']['config'][0]; } else { - mwexec("/etc/rc.d/inetd stop"); + $mk_config = array(); } - - /* Write config if any file from filesystem was loaded. */ - if ($update_conf > 0) { - write_config(); + $mk_config = $config['installedpackages']['checkmk']['config'][0]; + if ($mk_config['checkmkenable'] != "on") { + return; } - conf_mount_ro(); + if ($type != "nat") { + return; + } - checkmk_sync_on_changes(); + /* Add checkmk daemon to inetd */ + $inetd_fd = fopen("/var/etc/inetd.conf", "a+"); + fwrite($inetd_fd, "check_mk\t\tstream\ttcp\tnowait\t\troot\t/usr/local/bin/check_mk_agent\tcheck_mk \n"); + fclose($inetd_fd); + + /* Generate NAT rules */ + if (!empty($mk_config['checkmkifaces'])) { + $checkmkifs = explode(",", $mk_config['checkmkifaces']); + $checkmkhosts = $mk_config['checkmkhosts'] ?: "any"; + $checkmkport = $mk_config['checkmkport'] ?: "6556"; + foreach ($checkmkifs as $checkmkif) { + if (empty($checkmkif)) { + continue; + } + $interface = get_real_interface($checkmkif); + if (empty($interface)) { + continue; + } + $ip = find_interface_ip($interface); + if (!is_ipaddrv4($ip)) { + continue; + } + + if (is_subnetv4($checkmkhosts) || is_ipaddr($checkmkhosts) || $checkmkhosts == "any") { + $natrules .= "rdr on {$interface} proto tcp from {$checkmkhosts} to {$ip} port {$checkmkport} -> 127.0.0.1 port {$checkmkport}\n"; + } elseif (is_alias($checkmkhosts)) { + $natrules .= "rdr on {$interface} proto tcp from \${$checkmkhosts} to {$ip} port {$checkmkport} -> 127.0.0.1 port {$checkmkport}\n"; + } + } + } + return $natrules; } function checkmk_validate_input($post, &$input_errors) { - foreach ($post as $key => $value) { - if (empty($value)) { - continue; - } - if (substr($key, 0, 3) == "port" && !preg_match("/^\d+$/", $value)) { - $input_errors[] = "{$value} is no a valid port number"; - } - if (substr($key, 0, 11) == "description" && !preg_match("@^[a-zA-Z0-9 _/.-]+$@", $value)) { - $input_errors[] = "Do not use special characters on description"; - } - if (substr($key, 0, 8) == "fullfile" && !preg_match("@^[a-zA-Z0-9_/.-]+$@", $value)) { - $input_errors[] = "Do not use special characters on filename"; - } - + if (!empty($post["checkmkport"]) && !is_port($post["checkmkport"])) { + $input_errors[] = "You must specify a valid port in 'Listen Port' field."; + + } + if (empty($post["checkmkifaces"])) { + $input_errors[] = "One or more 'Listen Interface(s)' must be selected"; + } + if (!empty($post["checkmkhosts"]) && !(is_alias($post["checkmkhosts"]) || is_subnetv4($post["checkmkhosts"]) || is_ipaddrv4($post["checkmkhosts"]))) { + $input_errors[] = "You must specify a valid IP address, subnet or alias in 'Hosts Allowed' field."; } } /* Uses XMLRPC to synchronize the changes to a remote node. */ function checkmk_sync_on_changes() { - global $config, $g; + global $config; + if (is_array($config['installedpackages']['checkmksync']['config'])) { $checkmk_sync = $config['installedpackages']['checkmksync']['config'][0]; $synconchanges = $checkmk_sync['synconchanges']; - $synctimeout = $checkmk_sync['synctimeout']; + $synctimeout = $checkmk_sync['synctimeout'] ?: '250'; switch ($synconchanges) { case "manual": - if (is_array($checkmk_sync[row])) { - $rs = $checkmksync[row]; + if (is_array($checkmk_sync['row'])) { + $rs = $checkmk_sync['row']; } else { - log_error("[check_mk-agent] XMLRPC sync is enabled but there is no hosts to push on squid config."); + log_error("[check_mk-agent] XMLRPC sync is enabled but there are no hosts configured as replication targets."); return; } break; case "auto": - if (is_array($config['installedpackages']['carpsettings']) && is_array($config['installedpackages']['carpsettings']['config'])) { - $system_carp = $config['installedpackages']['carpsettings']['config'][0]; + if (is_array($config['hasync'])) { + $system_carp = $config['hasync']; $rs[0]['ipaddress'] = $system_carp['synchronizetoip']; $rs[0]['username'] = $system_carp['username']; $rs[0]['password'] = $system_carp['password']; + $rs[0]['syncdestinenable'] = FALSE; + + // XMLRPC sync is currently only supported over connections using the same protocol and port as this system + if ($config['system']['webgui']['protocol'] == "http") { + $rs[0]['syncprotocol'] = "http"; + $rs[0]['syncport'] = $config['system']['webgui']['port'] ?: '80'; + } else { + $rs[0]['syncprotocol'] = "https"; + $rs[0]['syncport'] = $config['system']['webgui']['port'] ?: '443'; + } + if ($system_carp['synchronizetoip'] == "") { + log_error("[check_mk-agent] XMLRPC CARP/HA sync is enabled but there are no system backup hosts configured as replication targets."); + return; + } else { + $rs[0]['syncdestinenable'] = TRUE; + } } else { - log_error("[check_mk-agent] XMLRPC sync is enabled but there is no system backup hosts to push squid config."); + log_error("[check_mk-agent] XMLRPC CARP/HA sync is enabled but there are no system backup hosts configured as replication targets."); return; } break; default: return; - break; + break; } if (is_array($rs)) { log_error("[check_mk-agent] XMLRPC sync is starting."); foreach ($rs as $sh) { - $sync_to_ip = $sh['ipaddress']; - $password = $sh['password']; - if ($sh['username']) { - $username = $sh['username']; - } else { - $username = 'admin'; - } - if ($password && $sync_to_ip) { - checkmk_do_xmlrpc_sync($sync_to_ip, $username, $password,$synctimeout); + // Only sync enabled replication targets + if ($sh['syncdestinenable']) { + $sync_to_ip = $sh['ipaddress']; + $port = $sh['syncport']; + $username = $sh['username'] ?: 'admin'; + $password = $sh['password']; + $protocol = $sh['syncprotocol']; + + $error = ''; + $valid = TRUE; + + if ($password == "") { + $error = "Password parameter is empty. "; + $valid = FALSE; + } + if (!is_ipaddr($sync_to_ip) && !is_hostname($sync_to_ip) && !is_domain($sync_to_ip)) { + $error .= "Misconfigured Replication Target IP Address or Hostname. "; + $valid = FALSE; + } + if (!is_port($port)) { + $error .= "Misconfigured Replication Target Port. "; + $valid = FALSE; + } + if ($valid) { + checkmk_do_xmlrpc_sync($sync_to_ip, $port, $protocol, $username, $password, $synctimeout); + } else { + log_error("[check_mk-agent] XMLRPC sync with '{$sync_to_ip}' aborted due to the following error(s): {$error}"); + } } - log_error("[check_mk-agent] XMLRPC sync is ending."); } + log_error("[check_mk-agent] XMLRPC sync completed."); } - } + } } /* Do the actual XMLRPC sync. */ -function checkmk_do_xmlrpc_sync($sync_to_ip, $username, $password,$synctimeout) { +function checkmk_do_xmlrpc_sync($sync_to_ip, $port, $protocol, $username, $password, $synctimeout) { global $config, $g; - if (!$username) { + if ($username == "" || $password == "" || $sync_to_ip == "" || $port == "" || $protocol == "") { + log_error("[check_mk-agent] A required XMLRPC sync parameter (username, password, replication target, port or protocol) is empty ... aborting pkg sync"); return; } - if (!$password) { - return; + // Take care of IPv6 literal address + if (is_ipaddrv6($sync_to_ip)) { + $sync_to_ip = "[{$sync_to_ip}]"; } - if (!$sync_to_ip) { - return; - } + $url = "{$protocol}://{$sync_to_ip}"; - $xmlrpc_sync_neighbor = $sync_to_ip; - if($config['system']['webgui']['protocol'] != "") { - $synchronizetoip = $config['system']['webgui']['protocol']; - $synchronizetoip .= "://"; - } - $port = $config['system']['webgui']['port']; - /* If port is empty, let's rely on the protocol selection. */ - if ($port == "") { - if($config['system']['webgui']['protocol'] == "http") { - $port = "80"; - } else { - $port = "443"; - } - } - $synchronizetoip .= $sync_to_ip; - - /* xml will hold the sections to sync. */ + /* XML will hold the sections to sync. */ $xml = array(); $xml['checkmk'] = $config['installedpackages']['checkmk']; - /* Assemble XMLRPC payload. */ - $params = array( - XML_RPC_encode($password), - XML_RPC_encode($xml) - ); - - /* Set a few variables needed for sync code; borrowed from filter.inc. */ - $url = $synchronizetoip; - log_error("[check_mk-agent] Beginning checkmk XMLRPC sync to {$url}:{$port}."); + $params = array(XML_RPC_encode($password), XML_RPC_encode($xml)); + + /* Set a few variables needed for sync code */ $method = 'pfsense.merge_installedpackages_section_xmlrpc'; $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); @@ -265,17 +311,17 @@ function checkmk_do_xmlrpc_sync($sync_to_ip, $username, $password,$synctimeout) if ($g['debug']) { $cli->setDebug(1); } - /* Send our XMLRPC message and timeout after 250 seconds. */ + /* Send our XMLRPC message and timeout after defined sync timeout value */ $resp = $cli->send($msg, $synctimeout); if (!$resp) { - $error = "[check_mk-agent] A communications error occurred while attempting checkmk XMLRPC sync with {$url}:{$port}."; - log_error($error); + $error = "A communications error occurred while attempting XMLRPC sync with {$url}:{$port}."; + log_error("[check_mk-agent] {$error}"); file_notice("sync_settings", $error, "checkmk Settings Sync", ""); } elseif ($resp->faultCode()) { $cli->setDebug(1); $resp = $cli->send($msg, $synctimeout); - $error = "[check_mk-agent] An error code was received while attempting checkmk XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); - log_error($error); + $error = "An error code was received while attempting XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); + log_error("[check_mk-agent] {$error}"); file_notice("sync_settings", $error, "checkmk Settings Sync", ""); } else { log_error("[check_mk-agent] XMLRPC sync successfully completed with {$url}:{$port}."); @@ -286,25 +332,21 @@ function checkmk_do_xmlrpc_sync($sync_to_ip, $username, $password,$synctimeout) $execcmd = "require_once('/usr/local/pkg/checkmk.inc');\n"; $execcmd .= "sync_package_checkmk();"; /* Assemble XMLRPC payload. */ - $params = array( - XML_RPC_encode($password), - XML_RPC_encode($execcmd) - ); + $params = array(XML_RPC_encode($password), XML_RPC_encode($execcmd)); - log_error("[check_mk-agent] XMLRPC reload data {$url}:{$port}."); $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); $resp = $cli->send($msg, $synctimeout); if (!$resp) { - $error = "[check_mk-agent] A communications error occurred while attempting checkmk XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; - log_error($error); + $error = "A communications error occurred while attempting XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; + log_error("[check_mk-agent] {$error}"); file_notice("sync_settings", $error, "checkmk Settings Sync", ""); } elseif ($resp->faultCode()) { $cli->setDebug(1); $resp = $cli->send($msg, $synctimeout); - $error = "[check_mk-agent] An error code was received while attempting checkmk XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); - log_error($error); + $error = "An error code was received while attempting XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); + log_error("[check_mk-agent] {$error}"); file_notice("sync_settings", $error, "checkmk Settings Sync", ""); } else { log_error("[check_mk-agent] XMLRPC reload data success with {$url}:{$port} (pfsense.exec_php)."); diff --git a/config/checkmk-agent/checkmk.xml b/config/checkmk-agent/checkmk.xml index b24edca7..6ded083c 100644 --- a/config/checkmk-agent/checkmk.xml +++ b/config/checkmk-agent/checkmk.xml @@ -42,7 +42,7 @@ ]]> </copyright> <name>checkmk</name> - <version>0.1.5</version> + <version>0.1.6</version> <title>check_mk Agent</title> <include_file>/usr/local/pkg/checkmk.inc</include_file> <additional_files_needed> @@ -63,22 +63,26 @@ <section>Diagnostics</section> <url>/pkg_edit.php?xml=checkmk.xml</url> </menu> + <service> + <name>check_mk</name> + <executable>inetd</executable> + <description>check_mk Agent</description> + </service> <tabs> <tab> - <text>Config</text> + <text>Settings</text> <url>/pkg_edit.php?xml=checkmk.xml</url> <active/> </tab> <tab> - <text>XMLRPC Sync</text> + <text>Sync</text> <url>/pkg_edit.php?xml=checkmk_sync.xml</url> </tab> </tabs> <fields> <field> <type>listtopic</type> - <fieldname>temp</fieldname> - <name>check_mk Agent Configuration</name> + <name>General Settings</name> </field> <field> <fielddescr>Enable check_mk Agent</fielddescr> @@ -91,19 +95,29 @@ For reference, see <a href="https://github.com/sileht/check_mk/tree/master/doc">project documentation at GitHub</a>. ]]> </description> - <required/> </field> <field> <fielddescr>Listen Port</fielddescr> <fieldname>checkmkport</fieldname> <type>input</type> <size>10</size> - <description>Enter port to listen on. Leave empty to use Default port 6556.</description> + <default_value>6556</default_value> + <description>Enter port to listen on. (Default: 6556)</description> + <required/> + </field> + <field> + <fielddescr>Listen Interface(s)</fielddescr> + <fieldname>checkmkifaces</fieldname> + <type>interfaces_selection</type> + <size>5</size> + <description>Select interface(s) to listen on.</description> + <hideinterfaceregex>loopback</hideinterfaceregex> + <required/> </field> <field> - <fielddescr>Hosts.allow</fielddescr> + <fielddescr>Hosts Allowed</fielddescr> <fieldname>checkmkhosts</fieldname> - <description>Enter hosts (comma separated) that can communicate with this agent.</description> + <description>Enter an IP address, subnet or alias for host(s) that can communicate with this agent. (Leave empty to allow any host.)</description> <type>input</type> <size>60</size> </field> @@ -111,13 +125,16 @@ <custom_php_install_command> checkmk_install(); </custom_php_install_command> + <custom_php_deinstall_command> + checkmk_deinstall(); + </custom_php_deinstall_command> <custom_php_validation_command> checkmk_validate_input($_POST, $input_errors); </custom_php_validation_command> - <custom_delete_php_command> - sync_package_checkmk(); - </custom_delete_php_command> <custom_php_resync_config_command> sync_package_checkmk(); </custom_php_resync_config_command> + <filter_rules_needed> + checkmk_generate_rules + </filter_rules_needed> </packagegui> diff --git a/config/checkmk-agent/checkmk_sync.xml b/config/checkmk-agent/checkmk_sync.xml index 1165152c..c08d280f 100644 --- a/config/checkmk-agent/checkmk_sync.xml +++ b/config/checkmk-agent/checkmk_sync.xml @@ -42,16 +42,16 @@ ]]> </copyright> <name>checkmksync</name> - <version>0.1.4</version> + <version>0.1.6</version> <title>check_mk Agent: Sync</title> <include_file>/usr/local/pkg/checkmk.inc</include_file> <tabs> <tab> - <text>Config</text> + <text>Settings</text> <url>/pkg_edit.php?xml=checkmk.xml</url> </tab> <tab> - <text>XMLRPC Sync</text> + <text>Sync</text> <url>/pkg_edit.php?xml=checkmk_sync.xml</url> <active/> </tab> @@ -59,88 +59,91 @@ <fields> <field> <type>listtopic</type> - <fieldname>temp</fieldname> - <name>Enable check_mk configuration sync</name> + <name>XMLRPC Sync</name> </field> <field> - <fielddescr>Sync Option</fielddescr> + <fielddescr>Enable Sync</fielddescr> <fieldname>synconchanges</fieldname> - <description>Automatically sync check_mk configuration changes.</description> + <description> + <![CDATA[ + Select a sync method for check_mk agent.<br/><br/> + <strong>Important:</strong> While using "Sync to host(s) defined below", only sync from host A to B, A to C but <strong>do not</strong> enable XMLRPC sync <b>to</b> A. + This will result in a loop! + ]]> + </description> <type>select</type> <required/> - <default_value>auto</default_value> + <default_value>disabled</default_value> <options> - <option> - <name>Sync to configured system backup server</name> - <value>auto</value> - </option> - <option> - <name>Sync to host(s) defined below</name> - <value>manual</value> - </option> - <option> - <name>Do not sync this package configuration</name> - <value>disabled</value> - </option> + <option><name>Sync to configured system backup server</name><value>auto</value></option> + <option><name>Sync to host(s) defined below</name><value>manual</value></option> + <option><name>Do not sync this package configuration</name><value>disabled</value></option> </options> </field> <field> <fielddescr>Sync Timeout</fielddescr> <fieldname>synctimeout</fieldname> - <description>Select sync max wait time</description> + <description>XMLRPC timeout in seconds.</description> <type>select</type> <required/> <default_value>250</default_value> <options> - <option> - <name>250 seconds (Default)</name> - <value>250</value> - </option> - <option> - <name>120 seconds</name> - <value>120</value> - </option> - <option> - <name>90 seconds</name> - <value>90</value> - </option> - <option> - <name>60 seconds</name> - <value>60</value> - </option> - <option> - <name>30 seconds</name> - <value>30</value> - </option> + <option><name>250 seconds (Default)</name><value>250</value></option> + <option><name>120 seconds</name><value>120</value></option> + <option><name>90 seconds</name><value>90</value></option> + <option><name>60 seconds</name><value>60</value></option> + <option><name>30 seconds</name><value>30</value></option> </options> </field> <field> - <fielddescr>Remote Servers</fielddescr> + <fielddescr>Replication Targets</fielddescr> <fieldname>none</fieldname> <type>rowhelper</type> <rowhelper> <rowhelperfield> - <fielddescr>IP Address</fielddescr> + <fielddescr>Enable</fielddescr> + <fieldname>syncdestinenable</fieldname> + <description><![CDATA[Enable this host as a replication target]]></description> + <type>checkbox</type> + </rowhelperfield> + <rowhelperfield> + <fielddescr>Protocol</fielddescr> + <fieldname>syncprotocol</fieldname> + <description><![CDATA[Choose the protocol used to sync with the destination host (HTTP or HTTPS).]]></description> + <type>select</type> + <default_value>HTTP</default_value> + <options> + <option><name>HTTP</name><value>http</value></option> + <option><name>HTTPS</name><value>https</value></option> + </options> + </rowhelperfield> + <rowhelperfield> + <fielddescr>IP Address/Hostname</fielddescr> <fieldname>ipaddress</fieldname> - <description>IP Address of remote server</description> + <description><![CDATA[IP address or hostname of the destination host.]]></description> <type>input</type> - <size>20</size> - <required/> + <size>40</size> + </rowhelperfield> + <rowhelperfield> + <fielddescr>Port</fielddescr> + <fieldname>syncport</fieldname> + <description><![CDATA[Choose the sync port of the destination host.]]></description> + <type>input</type> + <size>3</size> </rowhelperfield> <rowhelperfield> - <fielddescr>Username</fielddescr> + <fielddescr>Username (admin)</fielddescr> <fieldname>username</fieldname> - <description>Username on remote server</description> + <description><![CDATA[Enter the username account for administration.]]></description> <type>input</type> <size>20</size> </rowhelperfield> <rowhelperfield> - <fielddescr>Password</fielddescr> + <fielddescr>Admin Password</fielddescr> <fieldname>password</fieldname> - <description>Password for remote server</description> + <description><![CDATA[Password of the user "admin" on the destination host.]]></description> <type>password</type> <size>20</size> - <required/> </rowhelperfield> </rowhelper> </field> @@ -148,7 +151,4 @@ <custom_php_resync_config_command> checkmk_sync_on_changes(); </custom_php_resync_config_command> - <custom_php_command_before_form> - unset($_POST['temp']); - </custom_php_command_before_form> </packagegui> |