diff options
Diffstat (limited to 'config/squid3/34/squid.inc')
-rwxr-xr-x | config/squid3/34/squid.inc | 121 |
1 files changed, 70 insertions, 51 deletions
diff --git a/config/squid3/34/squid.inc b/config/squid3/34/squid.inc index f4be3ee3..267305ce 100755 --- a/config/squid3/34/squid.inc +++ b/config/squid3/34/squid.inc @@ -2163,28 +2163,45 @@ function squid_generate_rules($type) { /* XMLRPC sync configuration */ function squid_sync_on_changes() { - global $config, $g; + global $config; + if (is_array($config['installedpackages']['squidsync']['config'])) { $squid_sync = $config['installedpackages']['squidsync']['config'][0]; $synconchanges = $squid_sync['synconchanges']; - $synctimeout = $squid_sync['synctimeout']; + $synctimeout = $squid_sync['synctimeout'] ?: '250'; switch ($synconchanges) { case "manual": if (is_array($squid_sync['row'])) { $rs = $squid_sync['row']; } else { - log_error("[squid] XMLRPC sync is enabled but there is no hosts to push on Squid config."); + log_error("[squid] XMLRPC sync is enabled but there are no hosts configured as replication targets."); return; } break; case "auto": - if (is_array($config['installedpackages']['carpsettings']) && is_array($config['installedpackages']['carpsettings']['config'])) { - $system_carp = $config['installedpackages']['carpsettings']['config'][0]; + if (is_array($config['hasync'])) { + $system_carp = $config['hasync']; $rs[0]['ipaddress'] = $system_carp['synchronizetoip']; $rs[0]['username'] = $system_carp['username']; $rs[0]['password'] = $system_carp['password']; + $rs[0]['syncdestinenable'] = FALSE; + + // XMLRPC sync is currently only supported over connections using the same protocol and port as this system + if ($config['system']['webgui']['protocol'] == "http") { + $rs[0]['syncprotocol'] = "http"; + $rs[0]['syncport'] = $config['system']['webgui']['port'] ?: '80'; + } else { + $rs[0]['syncprotocol'] = "https"; + $rs[0]['syncport'] = $config['system']['webgui']['port'] ?: '443'; + } + if ($system_carp['synchronizetoip'] == "") { + log_error("[squid] XMLRPC CARP/HA sync is enabled but there are no system backup hosts configured as replication targets."); + return; + } else { + $rs[0]['syncdestinenable'] = TRUE; + } } else { - log_error("[squid] XMLRPC sync is enabled but there is no system backup hosts to push Squid config."); + log_error("[squid] XMLRPC CARP/HA sync is enabled but there are no system backup hosts configured as replication targets."); return; } break; @@ -2195,45 +2212,56 @@ function squid_sync_on_changes() { if (is_array($rs)) { log_error("[squid] XMLRPC sync is starting."); foreach ($rs as $sh) { - $sync_to_ip = $sh['ipaddress']; - $password = $sh['password']; - if ($sh['username']) { - $username = $sh['username']; - } else { - $username = 'admin'; - } - if ($password && $sync_to_ip) { - squid_do_xmlrpc_sync($sync_to_ip, $username, $password, $synctimeout); + // Only sync enabled replication targets + if ($sh['syncdestinenable']) { + $sync_to_ip = $sh['ipaddress']; + $port = $sh['syncport']; + $username = $sh['username'] ?: 'admin'; + $password = $sh['password']; + $protocol = $sh['syncprotocol']; + + $error = ''; + $valid = TRUE; + + if ($password == "") { + $error = "Password parameter is empty. "; + $valid = FALSE; + } + if (!is_ipaddr($sync_to_ip) && !is_hostname($sync_to_ip) && !is_domain($sync_to_ip)) { + $error .= "Misconfigured Replication Target IP Address or Hostname. "; + $valid = FALSE; + } + if (!is_port($port)) { + $error .= "Misconfigured Replication Target Port. "; + $valid = FALSE; + } + if ($valid) { + squid_do_xmlrpc_sync($sync_to_ip, $port, $protocol, $username, $password, $synctimeout); + } else { + log_error("[squid] XMLRPC sync with '{$sync_to_ip}' aborted due to the following error(s): {$error}"); + } } } - log_error("[squid] XMLRPC sync is ending."); + log_error("[squid] XMLRPC sync completed."); } - } + } } /* Perform the actual XMLRPC sync */ -function squid_do_xmlrpc_sync($sync_to_ip, $username, $password, $synctimeout) { +function squid_do_xmlrpc_sync($sync_to_ip, $port, $protocol, $username, $password, $synctimeout) { global $config, $g; - if (!$username || !$password || !$sync_to_ip) { + if ($username == "" || $password == "" || $sync_to_ip == "" || $port == "" || $protocol == "") { + log_error("[squid] A required XMLRPC sync parameter (username, password, replication target, port or protocol) is empty ... aborting pkg sync"); return; } - if (!$synctimeout) { - $synctimeout = 250; + // Take care of IPv6 literal address + if (is_ipaddrv6($sync_to_ip)) { + $sync_to_ip = "[{$sync_to_ip}]"; } - $xmlrpc_sync_neighbor = $sync_to_ip; - if ($config['system']['webgui']['protocol'] != "") { - $synchronizetoip = $config['system']['webgui']['protocol']; - $synchronizetoip .= "://"; - } - $port = $config['system']['webgui']['port']; - /* If port is empty let's rely on the protocol selection */ - if ($port == "") { - $port = $config['system']['webgui']['protocol'] == "http" ? "80" : "443"; - } - $synchronizetoip .= $sync_to_ip; + $url = "{$protocol}://{$sync_to_ip}"; /* XML will hold the sections to sync */ $xml = array(); @@ -2249,14 +2277,9 @@ function squid_do_xmlrpc_sync($sync_to_ip, $username, $password, $synctimeout) { $xml['squidauth'] = $config['installedpackages']['squidauth']; $xml['squidusers'] = $config['installedpackages']['squidusers']; /* Assemble XMLRPC payload */ - $params = array( - XML_RPC_encode($password), - XML_RPC_encode($xml) - ); + $params = array(XML_RPC_encode($password), XML_RPC_encode($xml)); /* Set a few variables needed for sync */ - $url = $synchronizetoip; - log_error("[squid] Beginning XMLRPC sync to {$url}:{$port}."); $method = 'pfsense.merge_installedpackages_section_xmlrpc'; $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); @@ -2267,14 +2290,14 @@ function squid_do_xmlrpc_sync($sync_to_ip, $username, $password, $synctimeout) { /* Send our XMLRPC message and timeout after defined sync timeout value*/ $resp = $cli->send($msg, $synctimeout); if (!$resp) { - $error = "[squid] Communication error occurred while attempting XMLRPC sync with {$url}:{$port}."; - log_error($error); + $error = "A communication error occurred while attempting XMLRPC sync with {$url}:{$port}."; + log_error("[squid] {$error}"); file_notice("sync_settings", $error, "Squid Settings Sync", ""); } elseif ($resp->faultCode()) { $cli->setDebug(1); $resp = $cli->send($msg, $synctimeout); - $error = "[squid] An error code was received while attempting XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); - log_error($error); + $error = "An error code was received while attempting XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); + log_error("[squid] {$error}"); file_notice("sync_settings", $error, "Squid Settings Sync", ""); } else { log_error("[squid] XMLRPC sync successfully completed with {$url}:{$port}."); @@ -2285,25 +2308,21 @@ function squid_do_xmlrpc_sync($sync_to_ip, $username, $password, $synctimeout) { $execcmd = "require_once('/usr/local/pkg/squid.inc');\n"; $execcmd .= "squid_resync('yes');"; /* Assemble XMLRPC payload */ - $params = array( - XML_RPC_encode($password), - XML_RPC_encode($execcmd) - ); + $params = array(XML_RPC_encode($password), XML_RPC_encode($execcmd)); - log_error("[squid] XMLRPC reload data {$url}:{$port}."); $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); $resp = $cli->send($msg, $synctimeout); if (!$resp) { - $error = "[squid] Communication error occurred while attempting XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; - log_error($error); + $error = "A communication error occurred while attempting XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; + log_error("[squid] {$error}"); file_notice("sync_settings", $error, "Squid Settings Sync", ""); } elseif ($resp->faultCode()) { $cli->setDebug(1); $resp = $cli->send($msg, $synctimeout); - $error = "[squid] An error code was received while attempting XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); - log_error($error); + $error = "An error code was received while attempting XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); + log_error("[squid] {$error}"); file_notice("sync_settings", $error, "Squid Settings Sync", ""); } else { log_error("[squid] XMLRPC reload data success with {$url}:{$port} (pfsense.exec_php)."); |