siproxd siproxd: Settings 0.5.9 siproxd Modify siproxd uses and settings.
Services
siproxd.xml /pkg_edit.php?xml=siproxd.xml&id=0
pkg_edit.php?xml=siproxd.xml&id=0 Settings /pkg_edit.php?xml=siproxd.xml&id=0 Users /pkg.php?xml=siproxdusers.xml http://www.pfsense.com/packages/config/siproxdusers.xml installedpackages->package->$packagename->configuration->settings Inbound interface if_inbound Select the inbound interface. interfaces_selection Outbound interface if_outbound Select the outbound interface. interfaces_selection Listening port port Enter the port on which to listen for SIP traffic (default 5060). Do not change this unless you know what you're doing. input Enable RTP proxy rtpenable Enable or disable the RTP proxy. (default is enabled) select RTP port range (lower) rtplower Enter the bottom edge of the port range siproxd will allocate for incoming RTP traffic. This range must be one not blocked by the firewall (default 7070). input RTP port range (upper) rtpupper Enter the top edge of the port range siproxd will allocate for incoming RTP traffic. This range must be one not blocked by the firewall (default 7079). input RTP stream timeout rtptimeout After this number of seconds, an RTP stream is considered dead and proxying it will be stopped (default 300sec). input Default expiration timeout defaulttimeout If a REGISTER request dose not contain an Expires header or expires= parameter, this number of seconds will be used and reported back to the UA in the answer. input Enable proxy authentication authentication If this is checked, clients will be forced to authenticate themselves at the proxy (for registration only). checkbox Outbound proxy hostname outboundproxyhost input Enter the hostname of an outbound proxy to send all traffic to. This is only useful if you have multiple masquerading firewalls to cross. Outbound proxy port outboundproxyport input Enter the port of the outbound proxy to send all traffic to. This is only useful if you have multiple masquerading firewalls to cross. mwexec("pkg_add -rv libosip2"); mwexec("rm /usr/local/etc/rc.d/siproxd.sh"); $fout = fopen("/usr/local/etc/rc.d/siproxd.sh","w"); fwrite($fout, "#!/bin/sh\n\n/usr/local/sbin/siproxd\n"); fclose($fout); function sync_package() { conf_mount_rw(); config_lock(); global $config; $fout = fopen("/usr/local/etc/siproxd.conf","w"); fwrite($fout, "# This file was automatically generated by the pfSense\n# package management system.\n\n"); if($_POST['if_inbound'] != "") { fwrite($fout, "if_inbound = " . $_POST['if_inbound'] . "\n"); } if($_POST['if_outbound'] != "") { fwrite($fout, "if_outbound = " . $_POST['if_outbound'] . "\n\n"); } if($_POST['port'] != "") { fwrite($fout, "sip_listen_port = " . $_POST['port'] . "\n\n"); } else { fwrite($fout, "sip_listen_port = 5060\n\n"); } fwrite($fout, "daemonize = 1\n\nsilence_log = 0\n\nlog_calls = 1\n\nuser = nobody\nchrootjail = /usr/local/siproxd/\n\nregistration_file = siproxd_registrations\n\npid_file = siproxd.pid\n\n"); if($_POST['rtpenable'] != "") { fwrite($fout, "rtp_proxy_enable = " . $_POST['rtpenable'] . "\n\n"); } else { fwrite($fout, "rtp_proxy_enable = 1\n\n"); } if($_POST['rtplower'] != "") { if($_POST['rtpupper'] != "") { fwrite($fout, "rtp_port_low = " . $_POST['rtplower'] . "\n"); fwrite($fout, "rtp_port_high = " . $_POST['rtpupper'] . "\n\n"); } } if($_POST['rtptimeout'] != "") { fwrite($fout, "rtp_timeout = " . $_POST['rtptimeout'] . "\n\n"); } else { fwrite($fout, "rtp_timeout = 300\n\n"); } if($_POST['defaulttimeout'] != "") { fwrite($fout, "default_expires = " . $_POST['defaulttimeout'] . "\n\n"); } else { fwrite($fout, "default_expires = 600\n\n"); } if($_POST['authentication']) { fwrite($fout, "proxy_auth_realm = Authentication_Realm\nproxy_auth_pwfile = /usr/local/etc/siproxd_passwd.cfg\n\n"); } fwrite($fout, "debug_level = 0x00000000\n\n"); if($_POST['outboundproxyhost'] != "") { if($_POST['outboundproxyport'] != "") { fwrite($fout, "outbound_proxy_host = " . $_POST['outboundproxyhost'] . "\n"); fwrite($fout, "outbound_proxy_port = " . $_POST['outboundproxyport'] . "\n"); } } fclose($fout); mwexec("killall siproxd"); mwexec("/usr/local/etc/rc.d/siproxd.sh"); conf_mount_ro(); config_unlock(); } sync_package();