Alias to be evaluated */ /* Returns: TRUE if Alias represents a single */ /* IP address or network, and FALSE */ /* if not. */ /***************************************************/ /* If spaces in expanded Alias, it's not a single entity */ if (strpos(trim(filter_expand_alias($alias)), " ") !== false) return false; else return true; } function snort_expand_port_range($ports, $delim = ',') { /**************************************************/ /* This function examines the passed ports string */ /* and expands any embedded port ranges into the */ /* individual ports separated by the specified */ /* delimiter. A port range is indicated by a */ /* colon in the string. */ /* */ /* On Entry: $ports ==> string to be evaluated */ /* with {$delim} separating */ /* the port values. */ /* Returns: string with any encountered port */ /* ranges expanded and the values */ /* delimited by {$delim}. */ /**************************************************/ $value = ""; // Split the incoming string on the specified delimiter $tmp = explode($delim, $ports); // Look for any included port range and expand it foreach ($tmp as $val) { if (is_portrange($val)) { $start = strtok($val, ":"); $end = strtok(":"); if ($end !== false) { $val = $start . $delim; for ($i = intval($start) + 1; $i < intval($end); $i++) $val .= strval($i) . $delim; $val .= $end; } } $value .= $val . $delim; } // Remove any trailing delimiter in return value return trim($value, $delim); } function snort_get_blocked_ips() { $blocked_ips = ""; exec('/sbin/pfctl -t snort2c -T show', $blocked_ips); $blocked_ips_array = array(); if (!empty($blocked_ips)) { $blocked_ips_array = array(); if (is_array($blocked_ips)) { foreach ($blocked_ips as $blocked_ip) { if (empty($blocked_ip)) continue; $blocked_ips_array[] = trim($blocked_ip, " \n\t"); } } } return $blocked_ips_array; } function snort_generate_id() { global $config; $snortglob = $config['installedpackages']['snortglobal']['rule']; while (true) { $snort_uuid = mt_rand(1, 65535); foreach ($snortglob as $value) { if ($value['uuid'] == $snort_uuid) continue 2; } break; } return $snort_uuid; } function snort_load_suppress_sigs($snortcfg, $track_by=false) { global $config; /**********************************************************/ /* This function loads the GEN_ID and SIG_ID for all the */ /* suppressed alert entries from the Suppression List of */ /* the passed Snort interface. The results are returned */ /* in an array with GEN_ID and SIG_ID as the primary */ /* keys. Any "track by_src" or "track by_dst" entries */ /* in the Suppression List are tacked on as additional */ /* keys in the array along with the IP address in either */ /* IPv4 or IPv6 format when $track_by is passed as true. */ /* */ /* Sample returned array: */ /* $suppress[1][2069] = "suppress" */ /* $suppress[1][2070]['by_src']['10.1.1.5'] = "suppress" */ /* $suppress[1][2070]['by_dst']['10.1.1.6'] = "suppress" */ /* */ /**********************************************************/ $suppress = array(); if (!is_array($config['installedpackages']['snortglobal'])) return; if (!is_array($config['installedpackages']['snortglobal']['suppress'])) return; if (!is_array($config['installedpackages']['snortglobal']['suppress']['item'])) return; $a_suppress = $config['installedpackages']['snortglobal']['suppress']['item']; foreach ($a_suppress as $a_id => $alist) { if ($alist['name'] == $snortcfg['suppresslistname']) { if (!empty($alist['suppresspassthru'])) { $tmplist = str_replace("\r", "", base64_decode($alist['suppresspassthru'])); $tmp = explode("\n", $tmplist); foreach ($tmp as $line) { // Skip any blank lines if (trim($line, " \n") == "") continue; // Skip any comment lines if (preg_match('/^\s*#/', $line)) continue; /* See if entry suppresses GID:SID for all hosts */ if (preg_match('/\s*suppress\s*gen_id\b\s*(\d+),\s*sig_id\b\s*(\d+)\s*$/i', $line, $matches)) { $genid = $matches[1]; $sigid = $matches[2]; if (!empty($genid) && !empty($sigid)) { if (!is_array($suppress[$genid])) $suppress[$genid] = array(); if (!is_array($suppress[$genid][$sigid])) $suppress[$genid][$sigid] = array(); $suppress[$genid][$sigid] = "suppress"; } } /* Get "track by IP" entries if requested */ if ($track_by) { /* See if entry suppresses only by SRC or DST IPv4 address */ if (preg_match('/\s*suppress\s*gen_id\b\s*(\d+),\s*sig_id\b\s*(\d+),\s*track\s*(by_src|by_dst),\s*ip\s*(\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3})\s*$/i', $line, $matches)) { $genid = $matches[1]; $sigid = $matches[2]; $whichip = trim($matches[3]); $ip = $matches[4]; if (!empty($genid) && !empty($sigid) && !empty($whichip) && !empty($ip)) { if (!is_array($suppress[$genid])) $suppress[$genid] = array(); if (!is_array($suppress[$genid][$sigid])) $suppress[$genid][$sigid] = array(); if (!is_array($suppress[$genid][$sigid][$whichip])) $suppress[$genid][$sigid][$whichip] = array(); if (!is_array($suppress[$genid][$sigid][$whichip][$ip])) $suppress[$genid][$sigid][$whichip][$ip] = array(); $suppress[$genid][$sigid][$whichip][$ip] = "suppress"; } } /* See if entry suppresses only by SRC or DST IPv6 address */ if (preg_match('/\s*suppress\s*gen_id\b\s*(\d+),\s*sig_id\b\s*(\d+),\s*track\s*(by_src|by_dst),\s*ip\s*([0-9a-f\.:]+)\s*$/i', $line, $matches)) { $genid = $matches[1]; $sigid = $matches[2]; $whichip = trim($matches[3]); $ip = trim($matches[4]); if (!empty($genid) && !empty($sigid) && !empty($whichip) && !empty($ip)) { if (!is_array($suppress[$genid])) $suppress[$genid] = array(); if (!is_array($suppress[$genid][$sigid])) $suppress[$genid][$sigid] = array(); if (!is_array($suppress[$genid][$sigid][$whichip])) $suppress[$genid][$sigid][$whichip] = array(); if (!is_array($suppress[$genid][$sigid][$whichip][$ip])) $suppress[$genid][$sigid][$whichip][$ip] = array(); $suppress[$genid][$sigid][$whichip][$ip] = "suppress"; } } } } unset($tmp); } break; } } unset($alist); return $suppress; } /* func builds custom white lists */ function snort_find_list($find_name, $type = 'whitelist') { global $config; $snortglob = $config['installedpackages']['snortglobal']; if (!is_array($snortglob[$type])) return ""; if (!is_array($snortglob[$type]['item'])) return ""; foreach ($snortglob[$type]['item'] as $value) { if ($value['name'] == $find_name) return $value; } return array(); } /* func builds custom whitelists and the HOME_NET variable */ function snort_build_list($snortcfg, $listname = "", $whitelist = false, $externallist = false) { /***********************************************************/ /* The default is to build a HOME_NET variable unless */ /* '$whitelist' is set to 'true' when calling. */ /***********************************************************/ global $config, $g, $aliastable, $filterdns; $home_net = array(); if (!$externallist && ($listname == 'default' || empty($listname))) { $localnet = 'yes'; $wanip = 'yes'; $wangw = 'yes'; $wandns = 'yes'; $vips = 'yes'; $vpns = 'yes'; } else { $list = snort_find_list($listname); if (empty($list)) return $list; $localnet = $list['localnets']; // $wanip = $list['wanips']; $wanip = 'yes'; $wangw = $list['wangateips']; $wandns = $list['wandnsips']; $vips = $list['vips']; $vpns = $list['vpnips']; if (!empty($list['address']) && is_alias($list['address'])) $home_net = explode(" ", trim(filter_expand_alias($list['address']))); } /* Always add loopback addresses to HOME_NET and whitelist */ if (!$externallist) { if (!in_array("127.0.0.1", $home_net)) $home_net[] = "127.0.0.1"; if (!in_array("::1", $home_net)) $home_net[] = "::1"; } /********************************************************************/ /* Always put the interface running Snort in HOME_NET and whitelist */ /* unless it's the WAN. WAN options are handled further down. */ /* If the user specifically chose not to include LOCAL_NETS in the */ /* WHITELIST, then do not include the Snort interface subnet in the */ /* WHITELIST. We do include the actual LAN interface IP for Snort, */ /* though, to prevent locking out the firewall itself. */ /********************************************************************/ $snortip = get_interface_ip($snortcfg['interface']); if (($externallist && $localnet == 'yes') || (!$externallist && (!$whitelist || $localnet == 'yes' || empty($localnet)))) { if (is_ipaddr($snortip)) { if ($snortcfg['interface'] <> "wan") { if ($sn = get_interface_subnet($snortcfg['interface'])) { $ip = gen_subnet($snortip, $sn) . "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } } } elseif (!$externallist && $localnet != 'yes') { if (is_ipaddrv4($snortip)) { if (!in_array($snortip, $home_net)) $home_net[] = $snortip; } } // Grab the IPv6 address if we have one assigned $snortip = get_interface_ipv6($snortcfg['interface']); // Trim off the interface designation (e.g., %em1) if present if (strpos($snortip, "%") !== FALSE) $snortip = substr($snortip, 0, strpos($snortip, "%")); if (($externallist && $localnet == 'yes') || (!$externallist && (!$whitelist || $localnet == 'yes' || empty($localnet)))) { if (is_ipaddrv6($snortip)) { if ($snortcfg['interface'] <> "wan") { if ($sn = get_interface_subnetv6($snortcfg['interface'])) { $ip = gen_subnetv6($snortip, $sn). "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } } } elseif (!$externallist && $localnet != 'yes') { if (is_ipaddrv6($snortip)) { if (!in_array($snortip, $home_net)) $home_net[] = $snortip; } } // Add link-local address if user included locally-attached networks $snortip = get_interface_linklocal($snortcfg['interface']); if (!empty($snortip) && $localnet == 'yes') { // Trim off the interface designation (e.g., %em1) if present if (strpos($snortip, "%") !== FALSE) $snortip = substr($snortip, 0, strpos($snortip, "%")); if (!in_array($snortip, $home_net)) $home_net[] = $snortip; } if (($externallist && $localnet == 'yes') || (!$externallist && (!$whitelist || $localnet == 'yes' || empty($localnet)))) { /*************************************************************************/ /* Iterate through the interface list and write out whitelist items and */ /* also compile a HOME_NET list of all the local interfaces for snort. */ /* Skip the WAN interface as we do not typically want that whole subnet */ /* whitelisted (just the i/f IP itself which was handled earlier). */ /*************************************************************************/ $int_array = get_configured_interface_list(); foreach ($int_array as $int) { if ($int == "wan") continue; $subnet = get_interface_ip($int); if (is_ipaddrv4($subnet)) { if ($sn = get_interface_subnet($int)) { $ip = gen_subnet($subnet, $sn) . "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } $subnet = get_interface_ipv6($int); // Trim off the interface designation (e.g., %em1) if present if (strpos($subnet, "%") !== FALSE) $subnet = substr($subnet, 0, strpos($subnet, "%")); if (is_ipaddrv6($subnet)) { if ($sn = get_interface_subnetv6($int)) { $ip = gen_subnetv6($subnet, $sn). "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } // Add link-local address $snortip = get_interface_linklocal($int); if (!empty($snortip)) { // Trim off the interface designation (e.g., %em1) if present if (strpos($snortip, "%") !== FALSE) $snortip = substr($snortip, 0, strpos($snortip, "%")); if (!in_array($snortip, $home_net)) $home_net[] = $snortip; } } } if ($wanip == 'yes') { $ip = get_interface_ip("wan"); if (is_ipaddrv4($ip)) { if (!in_array($ip, $home_net)) $home_net[] = $ip; } $ip = get_interface_ipv6("wan"); // Trim off the interface designation (e.g., %em1) if present if (strpos($ip, "%") !== FALSE) $ip = substr($ip, 0, strpos($ip, "%")); if (is_ipaddrv6($ip)) { if (!in_array($ip, $home_net)) $home_net[] = $ip; } // Explicitly grab the WAN Link-Local address $snortip = get_interface_linklocal("wan"); if (!empty($snortip)) { // Trim off the interface designation (e.g., %em1) if present if (strpos($snortip, "%") !== FALSE) $snortip = substr($snortip, 0, strpos($snortip, "%")); if (!in_array($snortip, $home_net)) $home_net[] = $snortip; } } if ($wangw == 'yes') { /* Grab the default gateway if set */ $default_gw = exec("/sbin/route -n get default |grep 'gateway:' | /usr/bin/awk '{ print $2 }'"); if (is_ipaddrv4($default_gw) && !in_array($default_gw, $home_net)) $home_net[] = $default_gw; if (is_ipaddrv6($default_gw) && !in_array($default_gw, $home_net)) $home_net[] = $default_gw; /* Get any other interface gateway and put in $HOME_NET if not there already */ $gw = get_interface_gateway($snortcfg['interface']); if (is_ipaddrv4($gw) && !in_array($gw, $home_net)) $home_net[] = $gw; $gw = get_interface_gateway_v6($snortcfg['interface']); // Trim off the interface designation (e.g., %em1) if present if (strpos($gw, "%") !== FALSE) $gw = substr($gw, 0, strpos($gw, "%")); if (is_ipaddrv6($gw) && !in_array($gw, $home_net)) $home_net[] = $gw; } if ($wandns == 'yes') { /* Add DNS server for WAN interface to whitelist */ $dns_servers = get_dns_servers(); foreach ($dns_servers as $dns) { if ($dns && !in_array($dns, $home_net)) $home_net[] = $dns; } } if($vips == 'yes') { /* iterate all vips and add to whitelist */ if (is_array($config['virtualip']) && is_array($config['virtualip']['vip'])) { foreach($config['virtualip']['vip'] as $vip) { if ($vip['subnet']) { if (!in_array("{$vip['subnet']}/{$vip['subnet_bits']}", $home_net)) $home_net[] = "{$vip['subnet']}/{$vip['subnet_bits']}"; } } } } // Grab a list of vpns enabled - these come back as CIDR mask networks if ($vpns == 'yes') { $vpns_list = filter_get_vpns_list(); if (!empty($vpns_list)) { /* Convert the returned space-delimited string to an array */ /* and then add each VPN address to our HOME_NET array. */ $vpns = explode(" ", $vpns_list); foreach ($vpns as $vpn) $home_net[] = trim($vpn); unset($vpns, $vpns_list); } } $valresult = array(); foreach ($home_net as $vald) { if (empty($vald)) continue; $vald = trim($vald); if (empty($valresult[$vald])) $valresult[$vald] = $vald; } /* Release memory no longer required */ unset($home_net); /* Sort the list and return it */ natsort($valresult); return $valresult; } /* checks to see if service is running */ function snort_is_running($snort_uuid, $if_real, $type = 'snort') { global $config, $g; return isvalidpid("{$g['varrun_path']}/{$type}_{$if_real}{$snort_uuid}.pid"); } function snort_barnyard_stop($snortcfg, $if_real) { global $config, $g; $snort_uuid = $snortcfg['uuid']; if (isvalidpid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Barnyard2 STOP for " . convert_real_interface_to_friendly_descr($if_real) . "({$if_real})..."); killbypid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid"); // Now wait up to 5 seconds for Barnyard2 to actually stop and clear its PID file $count = 0; do { if (!isvalidpid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid")) break; sleep(1); $count++; } while ($count < 5); } unlink_if_exists("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid"); } function snort_stop($snortcfg, $if_real) { global $config, $g; $snort_uuid = $snortcfg['uuid']; if (isvalidpid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Snort STOP for " . convert_real_interface_to_friendly_descr($if_real) . "({$if_real})..."); killbypid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid"); // Now wait up to 10 seconds for Snort to actually stop and clear its PID file $count = 0; do { if (!isvalidpid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid")) break; sleep(1); $count++; } while ($count < 10); } unlink_if_exists("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid"); snort_barnyard_stop($snortcfg, $if_real); } function snort_barnyard_start($snortcfg, $if_real, $background=FALSE) { global $config, $g; $snortdir = SNORTDIR; $snortlogdir = SNORTLOGDIR; $snort_uuid = $snortcfg['uuid']; $snortbindir = SNORT_PBI_BINDIR; if ($snortcfg['barnyard_enable'] == 'on' && !isvalidpid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Barnyard2 START for " . convert_real_interface_to_friendly_descr($if_real) . "({$if_real})..."); if ($background) mwexec_bg("{$snortbindir}barnyard2 -r {$snort_uuid} -f \"snort_{$snort_uuid}_{$if_real}.u2\" --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d {$snortlogdir}/snort_{$if_real}{$snort_uuid} -D -q"); else mwexec("{$snortbindir}barnyard2 -r {$snort_uuid} -f \"snort_{$snort_uuid}_{$if_real}.u2\" --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d {$snortlogdir}/snort_{$if_real}{$snort_uuid} -D -q"); } } function snort_start($snortcfg, $if_real, $background=FALSE) { global $config, $g; $snortdir = SNORTDIR; $snortlogdir = SNORTLOGDIR; $snort_uuid = $snortcfg['uuid']; $snortbindir = SNORT_PBI_BINDIR; if ($config['installedpackages']['snortglobal']['verbose_logging'] == "on") $quiet = ""; else $quiet = "-q --suppress-config-log"; if ($snortcfg['enable'] == 'on' && !isvalidpid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Snort START for " . convert_real_interface_to_friendly_descr($if_real) . "({$if_real})..."); if ($background) mwexec_bg("{$snortbindir}snort -R {$snort_uuid} -D {$quiet} -l {$snortlogdir}/snort_{$if_real}{$snort_uuid} --pid-path {$g['varrun_path']} --nolock-pidfile -G {$snort_uuid} -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/snort.conf -i {$if_real}"); else mwexec("{$snortbindir}snort -R {$snort_uuid} -D {$quiet} -l {$snortlogdir}/snort_{$if_real}{$snort_uuid} --pid-path {$g['varrun_path']} --nolock-pidfile -G {$snort_uuid} -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/snort.conf -i {$if_real}"); snort_barnyard_start($snortcfg, $if_real, $background); } } function snort_start_all_interfaces($background=FALSE) { /*************************************************************/ /* This function starts all configured and enabled Snort */ /* interfaces. */ /*************************************************************/ global $g, $config; /* do nothing if no Snort interfaces active */ if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; foreach ($config['installedpackages']['snortglobal']['rule'] as $snortcfg) { if ($snortcfg['enable'] != 'on') continue; snort_start($snortcfg, get_real_interface($snortcfg['interface']), $background); } } function snort_stop_all_interfaces() { /*************************************************************/ /* This function stops all configured Snort interfaces. */ /*************************************************************/ global $g, $config; /* do nothing if no Snort interfaces active */ if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; foreach ($config['installedpackages']['snortglobal']['rule'] as $snortcfg) { snort_stop($snortcfg, get_real_interface($snortcfg['interface'])); } } function snort_restart_all_interfaces() { /*************************************************************/ /* This function stops all configured Snort interfaces and */ /* restarts enabled Snort interfaces. */ /*************************************************************/ global $g, $config; /* do nothing if no Snort interfaces active */ if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; snort_stop_all_interfaces(); sleep(2); snort_start_all_interfaces(TRUE); } function snort_reload_config($snortcfg, $signal="SIGHUP") { /*************************************************************/ /* This function sends the passed SIGNAL to the Snort */ /* instance on the passed interface to cause Snort to */ /* reload and parse the running configuration without */ /* stopping packet processing. It also executes the */ /* the reload as a background process and returns control */ /* immediately to the caller. */ /* */ /* $signal = SIGHUP (default) parses and reloads config. */ /* SIGURG updates Host Attribute Table. */ /*************************************************************/ global $config, $g; $snortdir = SNORTDIR; $snort_uuid = $snortcfg['uuid']; $if_real = get_real_interface($snortcfg['interface']); /******************************************************/ /* Only send the SIGHUP if Snort is running and we */ /* can find a valid PID for the process. */ /******************************************************/ if (isvalidpid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Snort RELOAD CONFIG for " . convert_real_interface_to_friendly_descr($if_real) . "({$if_real})..."); mwexec_bg("/bin/pkill -{$signal} -F {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid"); } } function snort_barnyard_reload_config($snortcfg, $signal="HUP") { /*************************************************************/ /* This function sends the passed SIGNAL to the Barnyard2 */ /* instance on the passed interface to cause Barnyard to */ /* reload and parse the running configuration without */ /* impacting packet processing. It also executes the reload */ /* as a background process and returns control immediately */ /* to the caller. */ /* */ /* $signal = HUP (default) parses and reloads config. */ /*************************************************************/ global $g; $snortdir = SNORTDIR; $snort_uuid = $snortcfg['uuid']; $if_real = get_real_interface($snortcfg['interface']); /******************************************************/ /* Only send the SIGHUP if Barnyard2 is running and */ /* we can find a valid PID for the process. */ /******************************************************/ if (isvalidpid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Barnyard2 CONFIG RELOAD initiated for " . convert_real_interface_to_friendly_descr($if_real) . "({$if_real})..."); mwexec_bg("/bin/pkill -{$signal} -F {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid"); } } /* this code block is for deleting logs while keeping the newest file, snort is linked to these files while running, do not take the easy way out by touch and rm, snort will lose sync and not log. */ function snort_post_delete_logs($snort_uuid = 0) { global $config, $g; /* do nothing if no Snort interfaces active */ if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; foreach ($config['installedpackages']['snortglobal']['rule'] as $value) { if ($value['uuid'] != $snort_uuid) continue; $if_real = get_real_interface($value['interface']); $snort_log_dir = SNORTLOGDIR . "/snort_{$if_real}{$snort_uuid}"; if ($if_real != '') { /* Clean-up Barnyard2 files if any exist */ $filelist = glob("{$snort_log_dir}/*{$snort_uuid}_{$if_real}.u2.*"); unset($filelist[count($filelist) - 1]); foreach ($filelist as $file) @unlink($file); /* Clean-up packet capture files if any exist */ unlink_if_exists("{$snort_log_dir}/snort.log.*"); /* Clean-up Barnyard2 archived files if any exist */ unlink_if_exists("{$snort_log_dir}/barnyard2/archive/*"); /* Clean-up stats file if enabled */ if ($value['perform_stat'] == 'on') @file_put_contents("{$snort_log_dir}/{$if_real}.stats", ""); } } } /* This returns size of passed directory or file in 1024-byte blocks */ function snort_Getdirsize($node) { if(!is_readable($node)) return false; $blah = exec( "/usr/bin/du -kdc $node" ); return substr( $blah, 0, strpos($blah, 9) ); } function snort_cron_job_exists($crontask, $match_time=FALSE, $minute="0", $hour="*", $monthday="*", $month="*", $weekday="*", $who="root") { /************************************************************ * This function iterates the cron[] array in the config * * to determine if the passed $crontask entry exists. It * * returns TRUE if the $crontask already exists, or FALSE * * if there is no match. * * * * The $match_time flag, when set, causes a test of the * * configured task execution times along with the task * * when checking for a match. * * * * We use this to prevent unneccessary config writes if * * the $crontask already exists. * ************************************************************/ global $config, $g; if (!is_array($config['cron'])) $config['cron'] = array(); if (!is_array($config['cron']['item'])) $config['cron']['item'] = array(); foreach($config['cron']['item'] as $item) { if(strpos($item['command'], $crontask) !== FALSE) { if ($match_time) { if ($item['minute'] != $minute) return FALSE; if ($item['hour'] != $hour) return FALSE; if ($item['mday'] != $monthday) return FALSE; if ($item['month'] != $month) return FALSE; if ($item['wday'] != $weekday) return FALSE; if ($item['who'] != $who) return FALSE; } return TRUE; } } return FALSE; } function snort_snortloglimit_install_cron($should_install=TRUE) { // See if simply removing existing "loglimit" job for Snort if ($should_install == FALSE) { if (snort_cron_job_exists("snort/snort_check_cron_misc.inc", FALSE)) install_cron_job("snort_check_cron_misc.inc", false); return; } // If there are no changes in the cron job command string from the existing job, then exit. if ($should_install && snort_cron_job_exists("/usr/local/pkg/snort/snort_check_cron_misc.inc", TRUE, "*/5")) return; // Else install the new or updated cron job by removing the // existing job first, then installing the new or updated job. install_cron_job("snort_check_cron_misc.inc", false); install_cron_job("/usr/bin/nice -n20 /usr/local/bin/php -f /usr/local/pkg/snort/snort_check_cron_misc.inc", $should_install, "*/5"); } function snort_rm_blocked_install_cron($should_install) { global $config, $g; // See if simply removing existing "expiretable" job for Snort if ($should_install == FALSE) { if (snort_cron_job_exists("snort2c", FALSE)) install_cron_job("snort2c", false); return; } // Grab the configured interval from our configuration $snort_rm_blocked_info_ck = $config['installedpackages']['snortglobal']['rm_blocked']; if ($snort_rm_blocked_info_ck == "15m_b") { $snort_rm_blocked_min = "*/2"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "900"; } if ($snort_rm_blocked_info_ck == "30m_b") { $snort_rm_blocked_min = "*/5"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "1800"; } if ($snort_rm_blocked_info_ck == "1h_b") { $snort_rm_blocked_min = "*/5"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "3600"; } if ($snort_rm_blocked_info_ck == "3h_b") { $snort_rm_blocked_min = "*/15"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "10800"; } if ($snort_rm_blocked_info_ck == "6h_b") { $snort_rm_blocked_min = "*/30"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "21600"; } if ($snort_rm_blocked_info_ck == "12h_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/1"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "43200"; } if ($snort_rm_blocked_info_ck == "1d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/2"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "86400"; } if ($snort_rm_blocked_info_ck == "4d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/8"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "345600"; } if ($snort_rm_blocked_info_ck == "7d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/14"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "604800"; } if ($snort_rm_blocked_info_ck == "28d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "0"; $snort_rm_blocked_mday = "*/2"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "2419200"; } // Construct the basic cron command task $command = "/usr/bin/nice -n20 /sbin/pfctl -q -t snort2c -T expire {$snort_rm_blocked_expire}"; // If there are no changes in the cron job command string from the existing job, then exit. if (snort_cron_job_exists($command, TRUE, $snort_rm_blocked_min, $snort_rm_blocked_hr, $snort_rm_blocked_mday, $snort_rm_blocked_month, $snort_rm_blocked_wday, "root")) return; // Else install the new or updated cron job if ($should_install) { // Remove the existing job first, then install the new or updated job install_cron_job("snort2c", false); install_cron_job($command, true, $snort_rm_blocked_min, $snort_rm_blocked_hr, $snort_rm_blocked_mday, $snort_rm_blocked_month, $snort_rm_blocked_wday, "root"); } } /* func to install snort update */ function snort_rules_up_install_cron($should_install) { global $config, $g; // If called with FALSE as argument, then we're removing // the existing job. if ($should_install == FALSE) { if (snort_cron_job_exists("snort_check_for_rule_updates.php", FALSE)) install_cron_job("snort_check_for_rule_updates.php", false); return; } // Grab the configured update interval from our configuration $snort_rules_up_info_ck = $config['installedpackages']['snortglobal']['autorulesupdate7']; /* See if a customized start time has been set for rule file updates */ if (!empty($config['installedpackages']['snortglobal']['rule_update_starttime'])) $snort_rules_upd_time = $config['installedpackages']['snortglobal']['rule_update_starttime']; else $snort_rules_upd_time = "00:03"; if ($snort_rules_up_info_ck == "6h_up") { $snort_rules_up_min = intval(substr($snort_rules_upd_time, -2)); $hour = intval(substr($snort_rules_upd_time, 0, 2)); $snort_rules_up_hr = strval($hour); for ($i=0; $i<3; $i++) { $hour += 6; if ($hour > 24) $hour -= 24; $snort_rules_up_hr .= "," . strval($hour); } $snort_rules_up_mday = "*"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "12h_up") { $snort_rules_up_min = intval(substr($snort_rules_upd_time, -2)); $hour = intval(substr($snort_rules_upd_time, 0, 2)); $snort_rules_up_hr = strval($hour) . ","; $hour += 12; if ($hour > 24) $hour -= 24; $snort_rules_up_hr .= strval($hour); $snort_rules_up_mday = "*"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "1d_up") { $snort_rules_up_min = intval(substr($snort_rules_upd_time, -2)); $snort_rules_up_hr = intval(substr($snort_rules_upd_time, 0, 2)); $snort_rules_up_mday = "*/1"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "4d_up") { $snort_rules_up_min = intval(substr($snort_rules_upd_time, -2)); $snort_rules_up_hr = intval(substr($snort_rules_upd_time, 0, 2)); $snort_rules_up_mday = "*/4"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "7d_up") { $snort_rules_up_min = intval(substr($snort_rules_upd_time, -2)); $snort_rules_up_hr = intval(substr($snort_rules_upd_time, 0, 2)); $snort_rules_up_mday = "*/7"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "28d_up") { $snort_rules_up_min = intval(substr($snort_rules_upd_time, -2)); $snort_rules_up_hr = intval(substr($snort_rules_upd_time, 0, 2)); $snort_rules_up_mday = "*/28"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } // Construct the basic cron command task $command = "/usr/bin/nice -n20 /usr/local/bin/php -f /usr/local/pkg/snort/snort_check_for_rule_updates.php"; // If there are no changes in the cron job command string from the existing job, then exit if (snort_cron_job_exists($command, TRUE, $snort_rules_up_min, $snort_rules_up_hr, $snort_rules_up_mday, $snort_rules_up_month, $snort_rules_up_wday, "root")) return; // Else install the new or updated cron job if ($should_install) { // Remove the existing job first, then install the new or updated job install_cron_job("snort_check_for_rule_updates.php", false); install_cron_job($command, $should_install, $snort_rules_up_min, $snort_rules_up_hr, $snort_rules_up_mday, $snort_rules_up_month, $snort_rules_up_wday, "root"); } } /* Only run when all ifaces needed to sync. Expects filesystem rw */ function sync_snort_package_config() { global $config, $g; global $rebuild_rules; $snortdir = SNORTDIR; $rcdir = RCFILEPREFIX; /* do not start config build if rules is empty or there are no Snort settings */ if (!is_array($config['installedpackages']['snortglobal']) || !is_array($config['installedpackages']['snortglobal']['rule'])) { return; } $snortconf = $config['installedpackages']['snortglobal']['rule']; foreach ($snortconf as $value) { /* Skip configuration of any disabled interface */ if ($value['enable'] != 'on') continue; /* create a snort.conf file for interface */ snort_generate_conf($value); /* create barnyard2.conf file for interface */ if ($value['barnyard_enable'] == 'on') snort_generate_barnyard2_conf($value, get_real_interface($value['interface'])); } $snortglob = $config['installedpackages']['snortglobal']; /* create snort bootup file snort.sh */ snort_create_rc(); snort_snortloglimit_install_cron(true); /* set the snort block hosts time IMPORTANT */ snort_rm_blocked_install_cron($snortglob['rm_blocked'] != "never_b" ? true : false); /* set the snort rules update time */ snort_rules_up_install_cron($snortglob['autorulesupdate7'] != "never_up" ? true : false); /* Do not attempt package sync if reinstalling package or booting */ if (!$g['snort_postinstall'] && !$g['booting']) snort_sync_on_changes(); } function snort_build_sid_msg_map($rules_path, $sid_file) { /*************************************************************/ /* This function reads all the rules file in the passed */ /* $rules_path variable and produces a properly formatted */ /* sid-msg.map v2 file for use by Snort and/or barnyard2. */ /* */ /* This function produces the new v2 format sid-msg.map */ /* with the field layout as follows: */ /* */ /* GID || SID || REV || CLASSTYPE || PRI || MSG || REF ... */ /* */ /* On Entry: $rules_path --> array or directory of files */ /* or a single file containing */ /* the rules to read. */ /* $sid_file --> the complete destination path */ /* and filename for the output */ /* sid-msg.map file. */ /*************************************************************/ $sidMap = array(); $rule_files = array(); /* First check if we were passed a directory, a single file */ /* or an array of filenames to read. Set our $rule_files */ /* variable accordingly. If we can't figure it out, return */ /* and don't write a sid-msg.map file. */ if (is_string($rules_path)) { if (is_dir($rules_path)) $rule_files = glob($rules_path . "*.rules"); elseif (is_file($rules_path)) $rule_files = (array)$rules_path; } elseif (is_array($rules_path)) $rule_files = $rules_path; else return; /* Read the rule files into an array, then iterate the list */ foreach ($rule_files as $file) { /* Don't process files with "deleted" in the filename */ if (stristr($file, "deleted")) continue; /* Read the file into an array, skipping missing files. */ if (!file_exists($file)) continue; $rules_array = file($file, FILE_SKIP_EMPTY_LINES); $record = ""; $b_Multiline = false; /* Read and process each line from the rules in the current file */ foreach ($rules_array as $rule) { /* Skip any non-rule lines unless we're in multiline mode. */ if (!preg_match('/^\s*#*\s*(alert|drop|pass)/i', $rule) && !$b_Multiline) continue; /* Test for a multi-line rule, and reassemble the */ /* pieces back into a single line. */ if (preg_match('/\\\\s*[\n]$/m', $rule)) { $rule = substr($rule, 0, strrpos($rule, '\\')); $record .= $rule; $b_Multiline = true; continue; } /* If the last segment of a multiline rule, then */ /* append it onto the previous parts to form a */ /* single-line rule for further processing below. */ elseif (!preg_match('/\\\\s*[\n]$/m', $rule) && $b_Multiline) { $record .= $rule; $rule = $record; } $b_Multiline = false; $record = ""; /* Parse the rule to find sid and any references. */ $gid = '1'; // default to 1 for regular rules $sid = ''; $rev = ''; $classtype = 'NOCLASS'; // required default for v2 format $priority = '0'; // required default for v2 format $msg = ''; $matches = ''; $sidEntry = ''; if (preg_match('/\bmsg\s*:\s*"(.+?)"\s*;/i', $rule, $matches)) $msg = trim($matches[1]); if (preg_match('/\bsid\s*:\s*(\d+)\s*;/i', $rule, $matches)) $sid = trim($matches[1]); if (preg_match('/\bgid\s*:\s*(\d+)\s*;/i', $rule, $matches)) $gid = trim($matches[1]); if (preg_match('/\brev\s*:\s*([^\;]+)/i', $rule, $matches)) $rev = trim($matches[1]); if (preg_match('/\bclasstype\s*:\s*([^\;]+)/i', $rule, $matches)) $classtype = trim($matches[1]); if (preg_match('/\bpriority\s*:\s*([^\;]+)/i', $rule, $matches)) $priority = trim($matches[1]); if (!empty($gid) && !empty($sid) && !empty($msg)) { $sidEntry = $gid . ' || ' . $sid . ' || ' . $rev . ' || ' . $classtype . ' || '; $sidEntry .= $priority . ' || ' . $msg; preg_match_all('/\breference\s*:\s*([^\;]+)/i', $rule, $matches); foreach ($matches[1] as $ref) $sidEntry .= " || " . trim($ref); $sidEntry .= "\n"; $sidMap[] = $sidEntry; } } } /* Sort the generated sid-msg map */ natcasesort($sidMap); /* Now print the result to the supplied file */ @file_put_contents($sid_file, "#v2\n# sid-msg.map file auto-generated by Snort.\n\n"); @file_put_contents($sid_file, array_values($sidMap), FILE_APPEND); } function snort_merge_reference_configs($cfg_in, $cfg_out) { /***********************************************************/ /* This function takes a list of "reference.config" files */ /* in the $cfg_in array and merges them into a single */ /* file specified by $cfg_out. The merging is done so */ /* no duplication of lines occurs in the output file. */ /***********************************************************/ $outMap = array(); foreach ($cfg_in as $file) { if (!file_exists($file)) continue; $in = file($file, FILE_SKIP_EMPTY_LINES); foreach ($in as $line) { /* Skip comment lines */ if (preg_match('/^\s*#/', $line)) continue; if (preg_match('/(\:)\s*(\w+)\s*(.*)/', $line, $matches)) { if (!empty($matches[2]) && !empty($matches[3])) { $matches[2] = trim($matches[2]); if (!array_key_exists($matches[2], $outMap)) { if (!is_array($outMap[$matches[2]])) $outMap[$matches[2]] = array(); $outMap[$matches[2]] = trim($matches[3]); } } } } } /* Sort the new reference map. */ uksort($outMap,'strnatcasecmp'); /**********************************************************/ /* Do NOT write an empty references.config file, just */ /* exit instead. */ /**********************************************************/ if (empty($outMap)) return false; /* Format and write it to the supplied output file. */ $format = "config reference: %-12s %s\n"; foreach ($outMap as $key=>$value) $outMap[$key] = sprintf($format, $key, $value); @file_put_contents($cfg_out, array_values($outMap)); return true; } function snort_merge_classification_configs($cfg_in, $cfg_out) { /************************************************************/ /* This function takes a list of "classification.config" */ /* files in the $cfg_in array and merges them into a */ /* single file specified by $cfg_out. The merging is done */ /* so no duplication of lines occurs in the output file. */ /************************************************************/ $outMap = array(); foreach ($cfg_in as $file) { if (!file_exists($file)) continue; $in = file($file, FILE_SKIP_EMPTY_LINES); foreach ($in as $line) { if (preg_match('/(.*:)(\s*.*),(.*),(.*)/', $line, $matches)) { /* Skip comment lines */ if (preg_match('/^\s*#/', $line)) continue; if (!empty($matches[2]) && !empty($matches[3]) && !empty($matches[4])) { $matches[2] = trim($matches[2]); if (!array_key_exists($matches[2], $outMap)) { if (!is_array($outMap[$matches[2]])) $outMap[$matches[2]] = array(); $outMap[$matches[2]] = trim($matches[3]) . "," . trim($matches[4]); } } } } } /* Sort the new classification map. */ uksort($outMap,'strnatcasecmp'); /**********************************************************/ /* Do NOT write an empty classification.config file, just */ /* exit instead. */ /**********************************************************/ if (empty($outMap)) return false; /* Format and write it to the supplied output file. */ $format = "config classification: %s,%s\n"; foreach ($outMap as $key=>$value) $outMap[$key] = sprintf($format, $key, $value); @file_put_contents($cfg_out, array_values($outMap)); return true; } function snort_load_rules_map($rules_path) { /***************************************************************/ /* This function loads and returns an array with all the rules */ /* found in the *.rules files in the passed rules path. */ /* */ /* $rules_path can be: */ /* a directory (assumed to contain *.rules files) */ /* a filename (identifying a specific *.rules file) */ /* an array of filenames (identifying *.rules files) */ /***************************************************************/ $map_ref = array(); $rule_files = array(); if (empty($rules_path)) return $map_ref; /************************************************************************************ * Read all the rules into the map array. * The structure of the map array is: * * map[gid][sid]['rule']['category']['action']['disabled']['managed']['flowbits'] * * where: * gid = Generator ID from rule, or 1 if general text * rule * sid = Signature ID from rule * rule = Complete rule text * category = File name of file containing the rule * action = alert, drop, reject or pass * disabled = 1 if rule is disabled (commented out), 0 if * rule is enabled * managed = 1 if rule is auto-managed by SID MGMT process, * 0 if not auto-managed * flowbits = Array of applicable flowbits if rule contains * flowbits options ************************************************************************************/ /* First check if we were passed a directory, a single file */ /* or an array of filenames to read. Set our $rule_files */ /* variable accordingly. If we can't figure it out, return */ /* an empty rules map array. */ if (is_string($rules_path)) { if (is_dir($rules_path)) $rule_files = glob($rules_path . "*.rules"); elseif (is_file($rules_path)) $rule_files = (array)$rules_path; } elseif (is_array($rules_path)) $rule_files = $rules_path; else return $map_ref; /* Read the rule files into an array, then iterate the list */ /* to process the rules from the files one-by-one. */ foreach ($rule_files as $file) { /* Don't process files with "deleted" in the filename. */ if (stristr($file, "deleted")) continue; /* Read the file contents into an array, skipping */ /* missing files. */ if (!file_exists($file)) continue; $rules_array = file($file, FILE_SKIP_EMPTY_LINES); $record = ""; $b_Multiline = false; /* Read and process each line from the rules in the */ /* current file into an array. */ foreach ($rules_array as $rule) { /* Skip any lines that may be just spaces. */ if (trim($rule, " \n") == "") continue; /* Skip any non-rule lines unless we're in */ /* multiline mode. */ if (!preg_match('/^\s*#*\s*(alert|log|pass|drop|reject|sdrop)/i', $rule) && !$b_Multiline) continue; /* Test for a multi-line rule; loop and reassemble */ /* the pieces back into a single line. */ if (preg_match('/\\\\s*[\n]$/m', $rule)) { $rule = substr($rule, 0, strrpos($rule, '\\')); $record .= $rule; $b_Multiline = true; continue; } /* If the last segment of a multiline rule, then */ /* append it onto the previous parts to form a */ /* single-line rule for further processing below. */ elseif (!preg_match('/\\\\s*[\n]$/m', $rule) && $b_Multiline) { $record .= $rule; $rule = $record; } /* We have an actual single-line rule, or else a */ /* re-assembled multiline rule that is now a */ /* single-line rule, so store it in our rules map. */ /* Get and test the SID. If we don't find one, */ /* ignore and skip this rule as it is invalid. */ $sid = snort_get_sid($rule); if (empty($sid)) { $b_Multiline = false; $record = ""; continue; } $gid = snort_get_gid($rule); if (!is_array($map_ref[$gid])) $map_ref[$gid] = array(); if (!is_array($map_ref[$gid][$sid])) $map_ref[$gid][$sid] = array(); $map_ref[$gid][$sid]['rule'] = $rule; $map_ref[$gid][$sid]['category'] = basename($file, ".rules"); if (preg_match('/^\s*\#+/', $rule)) $map_ref[$gid][$sid]['disabled'] = 1; else $map_ref[$gid][$sid]['disabled'] = 0; /* Grab the rule action (this is for a future option) */ $matches = array(); if (preg_match('/^\s*#*\s*(alert|log|pass|drop|reject|sdrop)/i', $rule, $matches)) $map_ref[$gid][$sid]['action'] = $matches[1]; else $map_ref[$gid][$sid]['action'] = ""; /* Grab any associated flowbits from the rule. */ $map_ref[$gid][$sid]['flowbits'] = snort_get_flowbits($rule); /* Reset our local flag and record variables */ /* for the next rule in the set. */ $b_Multiline = false; $record = ""; } /* Zero out our processing array and get the next file. */ unset($rules_array); } return $map_ref; } function snort_get_gid($rule) { /****************************************************************/ /* If a gid is defined, then return it, else default to "1" for */ /* general text rules match. */ /****************************************************************/ if (preg_match('/\bgid\s*:\s*(\d+)\s*;/i', $rule, $matches)) return trim($matches[1]); else return "1"; } function snort_get_sid($rule) { /***************************************************************/ /* If a sid is defined, then return it, else default to an */ /* empty value. */ /***************************************************************/ if (preg_match('/\bsid\s*:\s*(\d+)\s*;/i', $rule, $matches)) return trim($matches[1]); else return ""; } function snort_get_msg($rule) { /**************************************************************/ /* Return the MSG section of the passed rule as a string. */ /**************************************************************/ $msg = ""; if (preg_match('/\bmsg\s*:\s*"(.+?)"\s*;/i', $rule, $matches)) $msg = trim($matches[1]); return $msg; } function snort_get_flowbits($rule) { /*************************************************************/ /* This will pull out "flowbits:" options from the rule text */ /* and return them in an array (minus the "flowbits:" part). */ /*************************************************************/ $flowbits = array(); /* Grab any "flowbits:set, setx, unset, isset or toggle" options first. */ /* Examine flowbits targets for logical operators to capture all targets */ if (preg_match_all('/flowbits\b\s*:\s*(set|setx|unset|toggle|isset|isnotset)\s*,([^;]+)/i', $rule, $matches)) { $i = -1; while (++$i < count($matches[1])) { $action = trim($matches[1][$i]); $target = preg_split('/[&|]/', $matches[2][$i]); foreach ($target as $t) $flowbits[] = "{$action}," . trim($t); } } /* Include the "flowbits:noalert or reset" options, if present. */ if (preg_match_all('/flowbits\b\s*:\s*(noalert|reset)\b/i', $rule, $matches)) { $i = -1; while (++$i < count($matches[1])) { $flowbits[] = trim($matches[1][$i]); } } return $flowbits; } function snort_get_checked_flowbits($rules_map) { /*************************************************************/ /* This function checks all the currently enabled rules to */ /* find any checked flowbits, and returns the checked */ /* flowbit names in an array. */ /*************************************************************/ $checked_flowbits = array(); foreach ($rules_map as $rulem) { if (!is_array($rulem)) continue; foreach ($rulem as $rulem2) { if (!is_array($rulem2)) continue; if ($rulem2['disabled'] == 1) continue; if (empty($rulem2['flowbits'])) continue; if (!is_array($rulem2['flowbits'])) continue; foreach ($rulem2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; /* If no comma in flowbits option, then skip it. */ $pos = strpos($flowbit, ","); if ($pos === false) continue; $action = substr(strtolower($flowbit), 0, $pos); if ($action == "isset" || $action == "isnotset") { $target = preg_split('/[&|]/', substr($flowbit, $pos + 1)); foreach ($target as $t) if (!empty($t) && !isset($checked_flowbits[$t])) { if (!is_array($checked_flowbits[$t])) $checked_flowbits[$t] = array(); $checked_flowbits[$t] = $action; } } } } } unset($rulem, $rulem2); return $checked_flowbits; } function snort_get_set_flowbits($rules_map) { /*********************************************************/ /* This function checks all the currently enabled rules */ /* to find any set flowbits, and returns the flowbit */ /* names in an array. */ /*********************************************************/ $set_flowbits = array(); foreach ($rules_map as $rulem) { if (!is_array($rulem)) continue; foreach ($rulem as $rulem2) { if ($rulem2['disabled'] == 1) continue; if (empty($rulem2['flowbits'])) continue; if (!is_array($rulem2['flowbits'])) continue; foreach ($rulem2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; /* If no comma in flowbits option, then skip it. */ $pos = strpos($flowbit, ","); if ($pos === false) continue; $action = substr(strtolower($flowbit), 0, $pos); if ($action == "set" || $action == "toggle" || $action == "setx") { $target = preg_split('/[&|]/', substr($flowbit, $pos + 1)); foreach ($target as $t) if (!empty($t) && !isset($set_flowbits[$t])) { if (!is_array($set_flowbits[$t])) $set_flowbits[$t] = array(); $set_flowbits[$t] = $action; } } } } } unset($rulem, $rulem2); return $set_flowbits; } function snort_find_flowbit_required_rules($rules, $unchecked_flowbits) { /********************************************************/ /* This function finds all rules that must be enabled */ /* in order to satisfy the "checked flowbits" used by */ /* the currently enabled rules. It returns the list */ /* of required rules in an array. */ /********************************************************/ $required_flowbits_rules = array(); foreach ($rules as $k1 => $rule) { if (!is_array($rule)) continue; foreach ($rule as $k2 => $rule2) { if (empty($rule2['flowbits'])) continue; if (!is_array($rule2['flowbits'])) continue; foreach ($rule2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; $action = substr($flowbit, 0, strpos($flowbit, ",")); if (!strcasecmp(substr($action, 0, 3), "set")) { $tmp = substr($flowbit, strpos($flowbit, ",") +1 ); if (!empty($tmp) && isset($unchecked_flowbits[$tmp])) { if (!is_array($required_flowbits_rules[$k1])) $required_flowbits_rules[$k1] = array(); if (!is_array($required_flowbits_rules[$k1][$k2])) $required_flowbits_rules[$k1][$k2] = array(); $required_flowbits_rules[$k1][$k2]['category'] = $rule2['category']; if ($rule2['disabled'] == 0) /* If not disabled, just return the rule text "as is" */ $required_flowbits_rules[$k1][$k2]['rule'] = ltrim($rule2['rule']); else { /* If rule is disabled, remove leading '#' to enable it */ $required_flowbits_rules[$k1][$k2]['rule'] = ltrim(substr($rule2['rule'], strpos($rule2['rule'], "#") + 1)); $required_flowbits_rules[$k1][$k2]['disabled'] = 0; } } } } } } unset($rule, $rule2); return $required_flowbits_rules; } function snort_resolve_flowbits($rules, $active_rules) { /******************************************************/ /* This function auto-resolves flowbit requirements */ /* by finding all checked flowbits in the currently */ /* enabled rules, and then making sure all the "set" */ /* flowbit rules for those "checked" flowbits are */ /* enabled. For any that are not enabled, they are */ /* copied to an array, enabled, and returned. */ /* */ /* $active_rules --> Rules Map array containing */ /* the current rules for the */ /* interface to resolve flowbit */ /* dependencies for. */ /* */ /* $rules --> Rules Map array containing */ /* all the available rules. */ /******************************************************/ $snortdir = SNORTDIR; /* Check $rules array to be sure it is filled. */ if (empty($rules)) { log_error(gettext("[Snort] WARNING: Flowbit resolution not done - no rules in {$snortdir}/rules/ ...")); return array(); } /* First, find all the "checked" and "set" flowbits. */ $checked_flowbits = snort_get_checked_flowbits($active_rules); $set_flowbits = snort_get_set_flowbits($active_rules); /* Next find any "checked" flowbits without matching */ /* "set" flowbit rules in the enabled rule set. */ $delta_flowbits = array_diff_key($checked_flowbits, $set_flowbits); /* Cleanup and release the memory we no longer need. */ unset($checked_flowbits); unset($set_flowbits); /* Now find all the needed "set flowbit" rules from */ /* the master list of all rules. */ $required_rules = snort_find_flowbit_required_rules($rules, $delta_flowbits); /* Cleanup and release memory we no longer need. */ unset($delta_flowbits); return $required_rules; } function snort_write_flowbit_rules_file($flowbit_rules, $rule_file) { /************************************************/ /* This function takes an array of rules in the */ /* rules_map format and writes them to the file */ /* given. */ /* */ /* $flowbit_rules --> array of flowbit-required */ /* rules. */ /* */ /* $rule_file --> filename to write the */ /* flowbit-required rules */ /* to. */ /************************************************/ $flowbit_rules_file = FLOWBITS_FILENAME; /* See if we were passed a directory or full */ /* filename to write the rules to, and adjust */ /* the destination argument accordingly. */ if (is_dir($rule_file)) $rule_file = rtrim($rule_file, '/')."/{$flowbit_rules_file}"; if (empty($flowbit_rules)) { @file_put_contents($rule_file, ""); return; } $fp = fopen($rule_file, "w"); if ($fp) { @fwrite($fp, "# These rules set flowbits checked by your other enabled rules. If the\n"); @fwrite($fp, "# dependent flowbits are not set, then some of your chosen rules may\n"); @fwrite($fp, "# not fire. Enabling all rules that set these dependent flowbits ensures\n"); @fwrite($fp, "# your chosen rules fire as intended.\n#\n"); @fwrite($fp, "# If you wish to prevent alerts from any of these rules, add the GID:SID\n"); @fwrite($fp, "# of the rule to the Suppression List for the interface.\n"); foreach ($flowbit_rules as $k1 => $rule) { foreach ($rule as $k2 => $rule2) { @fwrite($fp, "\n# Category: {$rule2['category']}"); @fwrite($fp, " GID:{$k1} SID:{$k2}\n"); @fwrite($fp, $rule2['rule']); } } fclose($fp); } } function snort_load_vrt_policy($policy, $all_rules=null) { /************************************************/ /* This function returns an array of all rules */ /* marked with the passed in $policy metadata. */ /* */ /* $policy --> desired VRT security policy */ /* 1. connectivity */ /* 2. balanced */ /* 3. security */ /* */ /* $all_rules --> optional Rules Map array of */ /* rules to scan for policy. */ /* If not provided, then an */ /* array will be created. */ /************************************************/ $snortdir = SNORTDIR; $vrt_policy_rules = array(); /* Load a map of all the VRT rules if we were */ /* not passed a pre-loaded one to use. */ if (is_null($all_rules)) { /* Since only Snort VRT rules have IPS Policy metadata, */ /* limit our search to just those files. */ $snort_vrt_files = glob("{$snortdir}/rules/snort_*.rules"); $all_rules = snort_load_rules_map($snort_vrt_files); } /* Now walk the rules list and find all those that are */ /* defined as active for the chosen security policy. */ foreach ($all_rules as $k1 => $arulem) { foreach ($arulem as $k2 => $arulem2) { if (strripos($arulem2['rule'], "policy {$policy}-ips") !== false) { if (!preg_match('/flowbits\s*:\s*noalert/i', $arulem2['rule'])) { if (!is_array($vrt_policy_rules[$k1])) $vrt_policy_rules[$k1] = array(); if (!is_array($vrt_policy_rules[$k1][$k2])) $vrt_policy_rules[$k1][$k2] = array(); $vrt_policy_rules[$k1][$k2] = $arulem2; /* Enable the policy rule if disabled */ if ($arulem2['disabled'] == 1) { $vrt_policy_rules[$k1][$k2]['rule'] = ltrim(substr($arulem2['rule'], strpos($arulem2['rule'], "#") + 1)); $vrt_policy_rules[$k1][$k2]['disabled'] = 0; } } } } } /* Release memory we no longer need. */ unset($arulem, $arulem2); /* Return all the rules that match the policy. */ return $vrt_policy_rules; } function snort_write_enforcing_rules_file($rule_map, $rule_path) { /************************************************/ /* This function takes a rules map array of */ /* the rules chosen for the active rule set */ /* and writes them out to the passed path. */ /* */ /* $rule_map --> Rules Map array of rules to */ /* write to disk. */ /* */ /* $rule_path --> filename or directory where */ /* rules file will be written. */ /************************************************/ $rule_file = "/" . SNORT_ENFORCING_RULES_FILENAME; /* See if we were passed a directory or full */ /* filename to write the rules to, and adjust */ /* the destination argument accordingly. */ if (is_dir($rule_path)) $rule_file = rtrim($rule_path, '/').$rule_file; else $rule_file = $rule_path; /* If the $rule_map array is empty, then exit. */ if (empty($rule_map)) { @file_put_contents($rule_file, ""); return; } $fp = fopen($rule_file, "w"); if ($fp) { @fwrite($fp, "# These rules are your current set of enforced rules for the protected\n"); @fwrite($fp, "# interface. This list was compiled from the categories selected on the\n"); @fwrite($fp, "# CATEGORIES tab of the Snort configuration for the interface and/or any\n"); @fwrite($fp, "# chosen Snort VRT pre-defined IPS Policy.\n#\n"); @fwrite($fp, "# Any enablesid or disablesid customizations you made have been applied\n"); @fwrite($fp, "# to the rules in this file.\n\n"); foreach ($rule_map as $rulem) { foreach ($rulem as $rulem2) { /* No reason to write disabled rules to enforcing file, so skip them. */ if ($rulem2['disabled'] == 1) continue; @fwrite($fp, $rulem2['rule']); } } fclose($fp); } } function snort_parse_sidconf_file($sidconf_file) { /**********************************************/ /* This function loads and processes the file */ /* specified by '$sidconf_file'. The file is */ /* assumed to contain valid instructions for */ /* matching rule SIDs as supported by the */ /* Oinkmaster and PulledPork utilities. */ /* */ /* $sidconf_file ==> full path and name of */ /* file to process */ /* */ /* Returns ==> an array containing */ /* SID modifier tokens */ /**********************************************/ $buf = ""; $sid_mods = array(); $fd = fopen("{$sidconf_file}", "r"); if ($fd == FALSE) { log_error("[Snort] Failed to open SID MGMT file '{$sidconf_file}' for processing."); return $sid_mods; } // Read and parse the conf file line-by-line while (($buf = fgets($fd)) !== FALSE) { $line = array(); // Skip any lines that may be just spaces. if (trim($buf, " \r\n") == "") continue; // Skip line with leading "#" since it's a comment if (preg_match('/^\s*#/', $buf)) continue; // Trim off any trailing comment $line = explode("#", $buf); // Trim leading and trailing spaces plus newline and any carriage returns $buf = trim($line[0], ' \r\n'); // Now split the SID mod arguments at the commas, if more than one // per line, and add to our $sid_mods array. $line = explode(",", $buf); foreach ($line as $ent) $sid_mods[] = trim($ent); } // Close the file, release unneeded memory and return // the array of SID mod tokens parsed from the file. fclose($fd); unset($line, $buf); return $sid_mods; } function snort_sid_mgmt_auto_categories($snortcfg, $log_results = FALSE) { /****************************************************/ /* This function parses any auto-SID conf files */ /* configured for the interface and returns an */ /* array of rule categories adjusted from the */ /* ['enabled_rulesets'] element in the config for */ /* the interface in accordance with the contents */ /* of the SID Mgmt conf files. */ /* */ /* The returned array shows which files should be */ /* removed and which should be added to the list */ /* used when building the enforcing ruleset. */ /* */ /* $snortcfg ==> pointer to interface */ /* configuration info */ /* $log_results ==> [optional] log results to */ /* 'sid_changes.log' in the */ /* interface directory in */ /* /var/log/snort when TRUE */ /* */ /* Returns ==> array of category file names */ /* for the interface. The keys */ /* are category file names and */ /* the corresponding values show */ /* if the file should be added */ /* or removed from the enabled */ /* rulesets list. */ /* */ /* Example - */ /* $changes[file] = 'enabled' */ /* */ /****************************************************/ global $config; $snort_sidmods_dir = SNORT_SID_MODS_PATH; $sid_mods = array(); $enables = array(); $disables = array(); // Check if auto-mgmt of SIDs is enabled, exit if not if ($config['installedpackages']['snortglobal']['auto_manage_sids'] != 'on') return array(); if (empty($snortcfg['disable_sid_file']) && empty($snortcfg['enable_sid_file'])) return array(); // Configure the interface's logging subdirectory if log results is enabled if ($log_results == TRUE) $log_file = SNORTLOGDIR . "/snort_" . get_real_interface($snortcfg['interface']) . "{$snortcfg['uuid']}/sid_changes.log"; else $log_file = NULL; // Get the list of currently enabled categories for the interface if (!empty($snortcfg['rulesets'])) $enabled_cats = explode("||", $snortcfg['rulesets']); if ($log_results == TRUE) { error_log(gettext("********************************************************\n"), 3, $log_file); error_log(gettext("Starting auto RULE CATEGORY management for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) ."\n"), 3, $log_file); error_log(gettext("Start Time: " . date("Y-m-d H:i:s") . "\n"), 3, $log_file); } switch ($snortcfg['sid_state_order']) { case "disable_enable": if (!empty($snortcfg['disable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing disable_sid file: {$snortcfg['disable_sid_file']}\n"), 3, $log_file); // Attempt to open the 'disable_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['disable_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'disable_sid_file' \"{$snortcfg['disable_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); if ($log_results == TRUE) error_log(gettext("Unable to open disable_sid file \"{$snortcfg['disable_sid_file']}\".\n"), 3, $log_file); } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['disable_sid_file']}"); if (!empty($sid_mods)) $disables = snort_get_auto_category_mods($enabled_cats, $sid_mods, "disable", $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['disable_sid_file']}\".\n"), 3, $log_file); } } if (!empty($snortcfg['enable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing enable_sid file: {$snortcfg['enable_sid_file']}\n"), 3, $log_file); // Attempt to open the 'enable_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['enable_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'enable_sid_file' \"{$snortcfg['enable_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); if ($log_results == TRUE) error_log(gettext("Unable to open enable_sid file \"{$snortcfg['enable_sid_file']}\".\n"), 3, $log_file); } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['enable_sid_file']}"); if (!empty($sid_mods)) $enables = snort_get_auto_category_mods($enabled_cats, $sid_mods, "enable", $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['enable_sid_file']}\".\n"), 3, $log_file); } } break; case "enable_disable": if (!empty($snortcfg['enable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing enable_sid file: {$snortcfg['enable_sid_file']}\n"), 3, $log_file); // Attempt to open the 'enable_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['enable_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'enable_sid_file' \"{$snortcfg['enable_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); if ($log_results == TRUE) error_log(gettext("Unable to open enable_sid file \"{$snortcfg['enable_sid_file']}\".\n"), 3, $log_file); } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['enable_sid_file']}"); if (!empty($sid_mods)) $enables = snort_get_auto_category_mods($enabled_cats, $sid_mods, "enable", $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['enable_sid_file']}\".\n"), 3, $log_file); } } if (!empty($snortcfg['disable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing disable_sid file: {$snortcfg['disable_sid_file']}\n"), 3, $log_file); // Attempt to open the 'disable_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['disable_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'disable_sid_file' \"{$snortcfg['disable_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); if ($log_results == TRUE) error_log(gettext("Unable to open disable_sid file \"{$snortcfg['disable_sid_file']}\".\n"), 3, $log_file); } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['disable_sid_file']}"); if (!empty($sid_mods)) $disables = snort_get_auto_category_mods($enabled_cats, $sid_mods, "disable", $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['disable_sid_file']}\".\n"), 3, $log_file); } } break; default: log_error(gettext("[Snort] Unrecognized 'sid_state_order' value. Skipping auto CATEGORY mgmt step for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); if ($log_results == TRUE) { error_log(gettext("ERROR: unrecognized 'sid_state_order' value. Skipping auto CATEGORY mgmt step for ") . convert_friendly_interface_to_friendly_descr($snortcfg['interface']). ".\n", 3, $log_file); } } if ($log_results == TRUE) { error_log(gettext("End Time: " . date("Y-m-d H:i:s") . "\n"), 3, $log_file); error_log(gettext("********************************************************\n\n"), 3, $log_file); } // Return the required rule category modifications as an array; return array_merge($enables, $disables); } function snort_get_auto_category_mods($categories, $sid_mods, $action, $log_results = FALSE, $log_file = NULL) { /****************************************************/ /* This function parses the provided SID mod tokens */ /* in $sid_mods and returns an array of category */ /* files that must be added ('enabled') or removed */ /* ('disabled') from the provided $categories list */ /* of enabled rule categories as determined by the */ /* content of the SID Mgmt tokens in $sid_mods. */ /* */ /* The returned array shows which files should be */ /* removed and which should be added to the list */ /* used when building the enforcing ruleset. */ /* */ /* $categories ==> array of currently enabled */ /* ruleset categories */ /* $sid_mods ==> array of SID modification */ /* tokens */ /* $action ==> modification action for */ /* matching category targets: */ /* 'enable' or 'disable' */ /* $log_results ==> [optional] 'yes' to log */ /* results to $log_file */ /* $log_file ==> full path and filename of log */ /* file to write to */ /* */ /* Returns ==> array of category file names */ /* for the interface. The keys */ /* are category file names and */ /* the corresponding values show */ /* if the file should be added */ /* or removed from the enabled */ /* rulesets list. */ /* */ /* Example - */ /* $changes[file] = 'enabled' */ /* */ /****************************************************/ $snortdir = SNORTDIR; $all_cats = array(); $changes = array(); $counter = 0; $matchcount = 0; // Get a list of all possible categories by loading all rules files foreach (array( VRT_FILE_PREFIX, ET_OPEN_FILE_PREFIX, ET_PRO_FILE_PREFIX, GPL_FILE_PREFIX ) as $prefix) { $files = glob("{$snortdir}/rules/{$prefix}*.rules"); foreach ($files as $file) $all_cats[] = basename($file); } // Walk the SID mod tokens and decode looking for rule // category enable/disable changes. foreach ($sid_mods as $tok) { $matches = array(); // Test the SID token for a GID:SID range and skip if true if (preg_match('/^(\d+):(\d+)-\1:(\d+)/', $tok)) continue; // Test the token for a single GID:SID and skip if true elseif (preg_match('/^(\d+):(\d+)$/', $tok)) continue; // Test the token for the PCRE: keyword and skip if true elseif (preg_match('/(^pcre\:)(.+)/i', $tok)) continue; // Test the token for the MS reference keyword and skip if true elseif (preg_match('/^MS\d+-.+/i', $tok)) continue; // Test the token for other keywords delimited with a colon and skip if true elseif (preg_match('/^[a-xA-X]+\:.+/', $tok)) continue; // Test the SID token for a rule category name. Anything that // failed to match above is considered a potential category name. elseif (preg_match('/[a-xA-X]+(-|\w).*/', $tok, $matches)) { $counter++; $regex = "/" . preg_quote(trim($matches[0]), '/') . "/i"; // Search through the $all_cats array for any matches to the regex $matches = preg_grep($regex, $all_cats); // See if any matches are in the $categories array foreach ($matches as $cat) { switch ($action) { case 'enable': if (!isset($changes[$cat])) { $changes[$cat] = 'enabled'; if ($log_results == TRUE && !empty($log_file)) error_log(gettext(" Enabled rule category: {$cat}\n"), 3, $log_file); $matchcount++; } break; case 'disable': if (!isset($changes[$cat])) { $changes[$cat] = 'disabled'; if ($log_results == TRUE && !empty($log_file)) error_log(gettext(" Disabled rule category: {$cat}\n"), 3, $log_file); $matchcount++; } break; default: break; } } } else { if ($log_results == TRUE && !empty($log_file)) error_log(gettext("WARNING: unrecognized token '{$tok}' encountered while processing an automatic SID MGMT file.\n"), 3, $log_file); } } if ($log_results == TRUE && !empty($log_file)) { error_log(gettext(" Parsed {$counter} potential Rule Categories to match from the list of tokens.\n"), 3, $log_file); error_log(gettext(" " . ucfirst($action) . "d {$matchcount} matching Rule Categories.\n"), 3, $log_file); } // Release memory no longer needed unset($all_cats, $matches); // Return array of rule category file changes return $changes; } function snort_modify_sid_state(&$rule_map, $sid_mods, $action, $log_results = FALSE, $log_file = NULL) { /**********************************************/ /* This function walks the provided array of */ /* SID modification tokens and locates the */ /* target SID or SIDs in the $rule_map array. */ /* It then performs the change specified by */ /* $action on the target SID or SIDs. */ /* */ /* $rule_map ==> reference to array of */ /* current rules */ /* $sid_mods ==> array of SID modification */ /* tokens */ /* $action ==> modification action for */ /* matching SID targets: */ /* 'enable' or 'disable' */ /* $log_results ==> [optional] 'yes' to log */ /* results to $log_file */ /* $log_file ==> full path and filename */ /* of log file to write to */ /* */ /* On Return ==> $rule_map array modified */ /* by changing state for */ /* matching SIDs. */ /* */ /* Returns a two-dimension */ /* array of matching GID:SID */ /* pairs. */ /**********************************************/ $sids = array(); // If no rules in $rule_map or mods in $sid_mods, // then nothing to do. if (empty($rule_map) || empty($sid_mods)) return $sids; // Validate the action keyword as we only accept // 'enable' and 'disable' as valid. switch ($action) { case "enable": break; case "disable": break; default: log_error(gettext("[Snort] Error - unknown action '{$action}' supplied to snort_modify_sid_state() function...no SIDs modified.")); return $sids; } // Walk the SID mod tokens and decode each one foreach ($sid_mods as $tok) { $matches = array(); // Test the SID token for a GID:SID range if (preg_match('/^(\d+):(\d+)-\1:(\d+)/', $tok, $matches)) { // It was a range, so find all the intervening SIDs $gid = trim($matches[1]); $lsid = trim($matches[2]); $usid = trim($matches[3]); $sids[$gid][$lsid] = $action; while ($lsid < $usid) { $lsid++; $sids[$gid][$lsid] = $action; } } // Test the SID token for a single GID:SID elseif (preg_match('/^(\d+):(\d+)$/', $tok, $matches)) { // It's a single GID:SID, so grab it $sids[$matches[1]][$matches[2]] = $action; } // Test the SID token for the PCRE: keyword elseif (preg_match('/(^pcre\:)(.+)/i', $tok, $matches)) { $regex = '/' . preg_quote($matches[2], '/') . '/i'; // Now search through the $rule_map in the 'rule' // element for any matches to the regex and get // the GID:SID. foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (preg_match($regex, $v['rule'])) { $sids[$k1][$k2] = $action; } } } } // Test the SID token for the MS reference keyword elseif (preg_match('/^MS\d+-.+/i', $tok, $matches)) { $regex = "/" . preg_quote($matches[0], '/') . "/i"; // Now search through the $rule_map in the 'rule' // element for any matches to the regex and get // the GID:SID. foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (preg_match($regex, $v['rule'])) { $sids[$k1][$k2] = $action; } } } } // Test the SID token for other keywords delimited with a colon elseif (preg_match('/^[a-xA-X]+\:.+/', $tok, $matches)) { $regex = "/" . str_replace(':', ",", preg_quote($matches[0], '/')) . "/i"; // Now search through the $rule_map in the 'rule' // element for any matches to the regex and get // the GID:SID. foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (preg_match($regex, $v['rule'])) { $sids[$k1][$k2] = $action; } } } } // Test the SID token for a rule category name. Anything that // failed to match above is considered a potential category name. elseif (preg_match('/[a-xA-X]+(-|\w).*/', $tok, $matches)) { $regex = "/" . preg_quote(trim($matches[0]), '/') . "/i"; // Now search through the $rule_map in the 'category' // element for any matches to the regex and get // the GID:SID. foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (preg_match($regex, $v['category'] . ".rules")) { $sids[$k1][$k2] = $action; } } } } else { if ($log_results == TRUE && !empty($log_file)) error_log(gettext("WARNING: unrecognized token '{$tok}' encountered while processing an automatic SID MGMT file.\n"), 3, $log_file); } } // Change state of all the matching GID:SID pairs we found // above in the $rule_map array passed to us. $modcount = $changecount = 0; $counter = count($sids, COUNT_RECURSIVE) - count($sids); if ($log_results == TRUE && !empty($log_file)) error_log(gettext(" Parsed {$counter} potential SIDs to match from the provided list of tokens.\n"), 3, $log_file); foreach (array_keys($sids) as $k1) { foreach (array_keys($sids[$k1]) as $k2) { if (isset($rule_map[$k1][$k2])) { if ($action == 'enable' && $rule_map[$k1][$k2]['disabled'] == 1) { $rule_map[$k1][$k2]['rule'] = ltrim($rule_map[$k1][$k2]['rule'], " \t#"); $rule_map[$k1][$k2]['disabled'] = 0; $rule_map[$k1][$k2]['managed'] = 1; $changecount++; $modcount++; } elseif ($action == 'disable' && $rule_map[$k1][$k2]['disabled'] == 0) { $rule_map[$k1][$k2]['rule'] = "# " . $rule_map[$k1][$k2]['rule']; $rule_map[$k1][$k2]['disabled'] = 1; $rule_map[$k1][$k2]['managed'] = 1; $changecount++; $modcount++; } } } } if ($log_results == TRUE && !empty($log_file)) { error_log(gettext(" Found {$modcount} matching SIDs in the active rules.\n"), 3, $log_file); error_log(gettext(" Changed state for {$changecount} SIDs to '{$action}d'.\n"), 3, $log_file); } // Return the array of matching SIDs return $sids; } function snort_modify_sid_content(&$rule_map, $sid_mods, $log_results = FALSE, $log_file = NULL) { /************************************************/ /* This function walks the provided array of */ /* SID modification tokens and locates the */ /* target SID or SIDs in the $rule_map array. */ /* It then modifies the content of the target */ /* SID or SIDs. Modifications are only valid */ /* for normal GID=1 text rules. */ /* */ /* $rule_map ==> reference to array of */ /* current rules */ /* $sid_mods ==> array of SID modification */ /* tokens */ /* $log_results ==> [optional] 'yes' to log */ /* results to $log_file */ /* $log_file ==> full path and filename */ /* of log file to write to */ /* */ /* On Return ==> $rule_map array modified */ /* by changing content for */ /* matching SIDs. */ /* */ /* Returns a two-dimension */ /* array of matching */ /* GID:SID pairs. */ /************************************************/ $sids = array(); $tokencounter = $modcount = $modifiedcount = 0; // If no rules in $rule_map or mods in $sid_mods, // then nothing to do. if (empty($rule_map) || empty($sid_mods)) return $sids; // Walk the SID mod tokens and decode each one foreach ($sid_mods as $tok) { $matches = array(); if (preg_match('/([\d+|,|\*]*)\s+"(.+)"\s+"(.*)"/', $tok, $matches)) { $tokencounter++; $sidlist = explode(",", $matches[1]); $from = '/' . preg_quote($matches[2], '/') . '/'; $to = $matches[3]; $count = 0; // Now walk the provided rule map and make the modifications if ($matches[1] == "*") { // If wildcard '*' provided for SID, then check them all foreach ($rule_map[1] as $rulem) { foreach ($rulem as $k2 => $v) { $modcount++; $rule_map[1][$k2]['rule'] = preg_replace($from, $to, $v['rule'], -1, $count); if ($count > 0) { $rule_map[1][$k2]['managed'] = 1; $sids[1][$k2] = 'modify'; $modifiedcount++; } } } } else { // Otherwise just check the provided SIDs foreach ($sidlist as $sid) { if (isset($rule_map[1][$sid])) { $modcount++; $rule_map[1][$sid]['rule'] = preg_replace($from, $to, $rule_map[1][$sid]['rule'], -1, $count); if ($count > 0) { $rule_map[1][$sid]['managed'] = 1; $sids[1][$sid] = 'modify'; $modifiedcount++; } } } } } else { if ($log_results == TRUE && !empty($log_file)) error_log(gettext("WARNING: unrecognized token '{$tok}' encountered while processing an automatic SID MGMT file.\n"), 3, $log_file); } } if ($log_results == TRUE && !empty($log_file)) { error_log(gettext(" Parsed {$tokencounter} potential SIDs to match from the provided list of tokens.\n"), 3, $log_file); error_log(gettext(" Found {$modcount} matching SIDs in the active rules.\n"), 3, $log_file); error_log(gettext(" Modified rule text for {$modifiedcount} SIDs.\n"), 3, $log_file); } // Return the array of matching SIDs return $sids; } function snort_process_enablesid(&$rule_map, $snortcfg, $log_results = FALSE, $log_file = NULL) { /**********************************************/ /* This function loads and processes the file */ /* specified by 'enable_sid_file' for the */ /* interface. The file is assumed to be a */ /* valid enablesid.conf file containing */ /* instructions for enabling matching rule */ /* SIDs. */ /* */ /* $rule_map ==> reference to array of */ /* current rules */ /* $snortcfg ==> interface config params */ /* $log_results ==> [optional] 'yes' to log */ /* results to $log_file */ /* $log_file ==> full path and filename */ /* of log file to write to */ /* */ /* On Return ==> suitably modified */ /* $rule_map array */ /**********************************************/ $snort_sidmods_dir = SNORT_SID_MODS_PATH; $snortlogdir = SNORTLOGDIR; $sid_mods = array(); // If no rules in $rule_map, then nothing to do if (empty($rule_map)) return; // Attempt to open the 'enable_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['enable_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'enable_sid_file' \"{$snortcfg['enable_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); return; } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['enable_sid_file']}"); if (!empty($sid_mods)) snort_modify_sid_state($rule_map, $sid_mods, "enable", $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['enable_sid_file']}\".\n"), 3, $log_file); } unset($sid_mods); } function snort_process_disablesid(&$rule_map, $snortcfg, $log_results = FALSE, $log_file = NULL) { /**********************************************/ /* This function loads and processes the file */ /* specified by 'disable_sid_file' for the */ /* interface. The file is assumed to be a */ /* valid disablesid.conf file containing */ /* instructions for disabling matching rule */ /* SIDs. */ /* */ /* $rule_map ==> reference to array of */ /* current rules */ /* $snortcfg ==> interface config params */ /* $log_results ==> [optional] 'yes' to log */ /* results to $log_file */ /* $log_file ==> full path and filename */ /* of log file to write to */ /* */ /* On Return ==> suitably modified */ /* $rule_map array */ /**********************************************/ $snort_sidmods_dir = SNORT_SID_MODS_PATH; $snortlogdir = SNORTLOGDIR; $sid_mods = array(); // If no rules in $rule_map, then nothing to do if (empty($rule_map)) return; // Attempt to open the 'disable_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['disable_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'disable_sid_file' \"{$snortcfg['disable_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); return; } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['disable_sid_file']}"); if (!empty($sid_mods)) snort_modify_sid_state($rule_map, $sid_mods, "disable", $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['disable_sid_file']}\".\n"), 3, $log_file); } unset($sid_mods); } function snort_process_modifysid(&$rule_map, $snortcfg, $log_results = FALSE, $log_file = NULL) { /**********************************************/ /* This function loads and processes the file */ /* specified by 'modify_sid_file' for the */ /* interface. The file is assumed to be a */ /* valid modifysid.conf file containing */ /* instructions for modifying matching rule */ /* SIDs. */ /* */ /* $rule_map ==> reference to array of */ /* current rules */ /* $snortcfg ==> interface config params */ /* $log_results ==> [optional] 'yes' to log */ /* results to $log_file */ /* $log_file ==> full path and filename */ /* of log file to write to */ /* */ /* On Return ==> suitably modified */ /* $rule_map array */ /**********************************************/ $snort_sidmods_dir = SNORT_SID_MODS_PATH; $snortlogdir = SNORTLOGDIR; $sid_mods = array(); // If no rules in $rule_map, then nothing to do if (empty($rule_map)) return; // Attempt to open the 'modify_sid_file' for the interface if (!file_exists("{$snort_sidmods_dir}{$snortcfg['modify_sid_file']}")) { log_error(gettext("[Snort] Error - unable to open 'modify_sid_file' \"{$snortcfg['modify_sid_file']}\" specified for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); return; } else $sid_mods = snort_parse_sidconf_file("{$snort_sidmods_dir}{$snortcfg['modify_sid_file']}"); if (!empty($sid_mods)) snort_modify_sid_content($rule_map, $sid_mods, $log_results, $log_file); elseif ($log_results == TRUE && !empty($log_file)) { error_log(gettext("WARNING: no valid SID match tokens found in file \"{$snortcfg['modify_sid_file']}\".\n"), 3, $log_file); } unset($sid_mods); } function snort_auto_sid_mgmt(&$rule_map, $snortcfg, $log_results = FALSE) { /**************************************************/ /* This function modifies the rules in the */ /* passed rule_map array based on values in the */ /* files 'enable_sid_file', 'disable_sid_file' */ /* and 'modify_sid_file' for the interface. */ /* */ /* If auto-mgmt of SIDs is enabled via the */ /* settings on the UPDATE RULES tab, then the */ /* rules are processed against these settings. */ /* */ /* $rule_map ==> array of current rules */ /* $snortcfg ==> interface config settings */ /* $log_results ==> [optional] log results to */ /* 'sid_changes.log' in the */ /* interface directory in */ /* /var/log/snort when TRUE */ /* */ /* Returns ==> TRUE if rules were changed; */ /* otherwise FALSE */ /**************************************************/ global $config; $result = FALSE; // Configure the interface's logging subdirectory if log results is enabled if ($log_results == TRUE) $log_file = SNORTLOGDIR . "/snort_" . get_real_interface($snortcfg['interface']) . "{$snortcfg['uuid']}/sid_changes.log"; else $log_file = NULL; // Check if auto-mgmt of SIDs is enabled and files are specified // for the interface. if ($config['installedpackages']['snortglobal']['auto_manage_sids'] == 'on' && (!empty($snortcfg['disable_sid_file']) || !empty($snortcfg['enable_sid_file']) || !empty($snortcfg['modify_sid_file']))) { if ($log_results == TRUE) { error_log(gettext("********************************************************\n"), 3, $log_file); error_log(gettext("Starting auto SID management for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) ."\n"), 3, $log_file); error_log(gettext("Start Time: " . date("Y-m-d H:i:s") . "\n"), 3, $log_file); } switch ($snortcfg['sid_state_order']) { case "disable_enable": if (!empty($snortcfg['disable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing disable_sid file: {$snortcfg['disable_sid_file']}\n"), 3, $log_file); snort_process_disablesid($rule_map, $snortcfg, $log_results, $log_file); } if (!empty($snortcfg['enable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing enable_sid file: {$snortcfg['enable_sid_file']}\n"), 3, $log_file); snort_process_enablesid($rule_map, $snortcfg, $log_results, $log_file); } if (!empty($snortcfg['modify_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing modify_sid file: {$snortcfg['modify_sid_file']}\n"), 3, $log_file); snort_process_modifysid($rule_map, $snortcfg, $log_results, $log_file); } $result = TRUE; break; case "enable_disable": if (!empty($snortcfg['enable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing enable_sid file: {$snortcfg['enable_sid_file']}\n"), 3, $log_file); snort_process_enablesid($rule_map, $snortcfg, $log_results, $log_file); } if (!empty($snortcfg['disable_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing disable_sid file: {$snortcfg['disable_sid_file']}\n"), 3, $log_file); snort_process_disablesid($rule_map, $snortcfg, $log_results, $log_file); } if (!empty($snortcfg['modify_sid_file'])) { if ($log_results == TRUE) error_log(gettext("Processing modify_sid file: {$snortcfg['modify_sid_file']}\n"), 3, $log_file); snort_process_modifysid($rule_map, $snortcfg, $log_results, $log_file); } $result = TRUE; break; default: log_error(gettext("[Snort] Unrecognized 'sid_state_order' value. Skipping auto SID mgmt step for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']))); if ($log_results == TRUE) { error_log(gettext("ERROR: unrecognized 'sid_state_order' value. Skipping auto SID mgmt step for ") . convert_friendly_interface_to_friendly_descr($snortcfg['interface']). ".\n", 3, $log_file); } $result = FALSE; } if ($log_results == TRUE) { error_log(gettext("End Time: " . date("Y-m-d H:i:s") . "\n"), 3, $log_file); error_log(gettext("********************************************************\n\n"), 3, $log_file); } } return $result; } function snort_load_sid_mods($sids) { /*****************************************/ /* This function parses the string of */ /* GID:SID values in $sids and returns */ /* an array with the GID and SID as the */ /* keys. The values in $sids are */ /* assumed to be delimited by "||". */ /* */ /* $sids ==> string of GID:SID values */ /* from the config file. */ /* */ /* Returns ==> a multidimensional array */ /* with GID and SID as the */ /* keys ($result[GID][SID]) */ /*****************************************/ $result = array(); if (empty($sids)) return $result; $tmp = explode("||", $sids); foreach ($tmp as $v) { if (preg_match('/(\d+)\s*:\s*(\d+)/', $v, $match)) { if (!is_array($result[$match[1]])) $result[$match[1]] = array(); if (!is_array($result[$match[1]][$match[2]])) $result[$match[1]][$match[2]] = array(); $result[$match[1]][$match[2]] = "{$match[1]}:{$match[2]}"; } } unset($tmp); return $result; } function snort_modify_sids(&$rule_map, $snortcfg) { /*****************************************/ /* This function modifies the rules in */ /* the passed rules_map array based on */ /* values in the enablesid/disablesid */ /* configuration parameters. */ /* */ /* $rule_map = array of current rules */ /* $snortcfg = config settings */ /*****************************************/ if (!isset($snortcfg['rule_sid_on']) && !isset($snortcfg['rule_sid_off'])) return; /* Load up our enablesid and disablesid */ /* arrays with lists of modified SIDs */ $enablesid = snort_load_sid_mods($snortcfg['rule_sid_on']); $disablesid = snort_load_sid_mods($snortcfg['rule_sid_off']); /* Turn on any rules that need to be */ /* forced "on" with enablesid mods. */ if (!empty($enablesid)) { foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (isset($enablesid[$k1][$k2]) && $v['disabled'] == 1) { $rule_map[$k1][$k2]['rule'] = ltrim($v['rule'], " \t#"); $rule_map[$k1][$k2]['disabled'] = 0; } } } } /* Turn off any rules that need to be */ /* forced "off" with disablesid mods. */ if (!empty($disablesid)) { foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (isset($disablesid[$k1][$k2]) && $v['disabled'] == 0) { $rule_map[$k1][$k2]['rule'] = "# " . $v['rule']; $rule_map[$k1][$k2]['disabled'] = 1; } } } } unset($enablesid, $disablesid); } function snort_create_rc() { /*********************************************************/ /* This function builds the /usr/local/etc/rc.d/snort.sh */ /* shell script for starting and stopping Snort. The */ /* script is rebuilt on each package sync operation and */ /* after any changes to snort.conf saved in the GUI. */ /*********************************************************/ global $config, $g; $snortdir = SNORTDIR; $snortlogdir = SNORTLOGDIR; $snortbindir = SNORT_PBI_BINDIR; $rcdir = RCFILEPREFIX; $snortconf = $config['installedpackages']['snortglobal']['rule']; // If no interfaces are configured for Snort, exit if (!is_array($snortconf) || count($snortconf) < 1) { unlink_if_exists("{$rcdir}snort.sh"); return; } // See whether or not to enable detailed startup logging if ($config['installedpackages']['snortglobal']['verbose_logging'] == "on") $quiet = ""; else $quiet = "-q --suppress-config-log"; // At least one interface is configured, so OK $start_snort_iface_start = array(); $start_snort_iface_stop = array(); // Loop thru each configured interface and build // the shell script. foreach ($snortconf as $value) { // Skip disabled Snort interfaces if ($value['enable'] <> 'on') continue; $snort_uuid = $value['uuid']; $if_real = get_real_interface($value['interface']); $start_barnyard = << /dev/null 2>&1 fi EOE; $stop_barnyard2 = <</dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done if [ -f {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid ]; then /bin/rm {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid fi else pid=`/bin/pgrep -fn "barnyard2 -r {$snort_uuid} "` if [ ! -z \$pid ]; then /bin/pkill -f "barnyard2 -r {$snort_uuid} " time=0 timeout=30 while kill -0 \$pid 2>/dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done fi fi EOE; if ($value['barnyard_enable'] == 'on') $start_barnyard2 = $start_barnyard; else $start_barnyard2 = $stop_barnyard2; $start_snort_iface_start[] = << /dev/null 2>&1 fi {$start_barnyard2} EOE; $start_snort_iface_stop[] = <</dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done if [ -f {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid ]; then /bin/rm {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid fi else pid=`/bin/pgrep -fn "snort -R {$snort_uuid} "` if [ ! -z \$pid ]; then /usr/bin/logger -p daemon.info -i -t SnortStartup "Snort STOP for {$value['descr']}({$snort_uuid}_{$if_real})..." /bin/pkill -fn "snort -R {$snort_uuid} " time=0 timeout=30 while kill -0 \$pid 2>/dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done fi fi sleep 1 {$stop_barnyard2} EOE; } $rc_start = implode("\n", $start_snort_iface_start); $rc_stop = implode("\n", $start_snort_iface_stop); $snort_sh_text = << 0) $snortbarnyardlog_output_plugins .= " sensor_name={$snortcfg['barnyard_sensor_name']}"; if ($snortcfg['barnyard_disable_sig_ref_tbl'] == 'on') $snortbarnyardlog_output_plugins .= " disable_signature_reference_table"; $snortbarnyardlog_output_plugins .= "\n\n"; } if ($snortcfg['barnyard_syslog_enable'] == 'on') { $snortbarnyardlog_output_plugins .= "# syslog_full: log to a syslog receiver\noutput alert_syslog_full: "; if (isset($snortcfg['barnyard_sensor_name']) && strlen($snortcfg['barnyard_sensor_name']) > 0) $snortbarnyardlog_output_plugins .= "sensor_name {$snortcfg['barnyard_sensor_name']}, "; else $snortbarnyardlog_output_plugins .= "sensor_name {$snortbarnyard_hostname_info}, "; if ($snortcfg['barnyard_syslog_local'] == 'on') $snortbarnyardlog_output_plugins .= "local, log_facility {$snortcfg['barnyard_syslog_facility']}, log_priority {$snortcfg['barnyard_syslog_priority']}\n\n"; else { $snortbarnyardlog_output_plugins .= "server {$snortcfg['barnyard_syslog_rhost']}, protocol {$snortcfg['barnyard_syslog_proto']}, "; $snortbarnyardlog_output_plugins .= "port {$snortcfg['barnyard_syslog_dport']}, operation_mode {$snortcfg['barnyard_syslog_opmode']}, "; $snortbarnyardlog_output_plugins .= "log_facility {$snortcfg['barnyard_syslog_facility']}, log_priority {$snortcfg['barnyard_syslog_priority']}\n\n"; } } if ($snortcfg['barnyard_bro_ids_enable'] == 'on') { $snortbarnyardlog_output_plugins .= "# alert_bro: log to a Bro-IDS receiver\n"; $snortbarnyardlog_output_plugins .= "output alert_bro: {$snortcfg['barnyard_bro_ids_rhost']}:{$snortcfg['barnyard_bro_ids_dport']}\n"; } // Trim leading and trailing newlines and spaces $snortbarnyardlog_output_plugins = rtrim($snortbarnyardlog_output_plugins, "\n"); // User pass-through arguments $snortbarnyardlog_config_pass_thru = str_replace("\r", "", base64_decode($snortcfg['barnconfigpassthru'])); // Create the conf file as a text string $barnyard2_conf_text = << $widget) { if (strstr($widget, "snort_alerts-container")) { if ($config['installedpackages']['snortglobal']['forcekeepsettings'] == 'on') { $config['installedpackages']['snortglobal']['dashboard_widget'] = $widget; } unset($widgetlist[$key]); break; } } $config['widgets']['sequence'] = implode(",", $widgetlist); } /* See if we are to clear blocked hosts on uninstall */ if ($config['installedpackages']['snortglobal']['clearblocks'] == 'on') { log_error(gettext("[Snort] Removing all blocked hosts from table...")); mwexec("/sbin/pfctl -t snort2c -T flush"); } /* See if we are to clear Snort log files on uninstall */ if ($config['installedpackages']['snortglobal']['clearlogs'] == 'on') { log_error(gettext("[Snort] Clearing all Snort-related log files...")); unlink_if_exists("{$snort_rules_upd_log}"); rmdir_recursive($snortlogdir); } /**********************************************************/ /* If not already, set Snort conf partition to read-write */ /* so we can make changes there */ /**********************************************************/ if (!is_subsystem_dirty('mount')) { conf_mount_rw(); $mounted_rw = TRUE; } /**********************************************************/ /* Test for existence of the snort directory in the PBI */ /* path. If not present, then a package "delete" */ /* operation is in progress and we need to wipe out the */ /* configuration files. Otherwise we leave the binary- */ /* side configuration intact since only a GUI files */ /* deinstall and reinstall operation is in progress. */ /**********************************************************/ if (!is_dir("{$snortdir}")) { log_error(gettext("[Snort] Package deletion requested... removing all files...")); unlink_if_exists("{$rcdir}snort.sh"); rmdir_recursive("/usr/local/pkg/snort"); rmdir_recursive("/usr/local/www/snort"); rmdir_recursive("/usr/local/etc/snort"); rmdir_recursive("/usr/local/lib/snort"); rmdir_recursive("/usr/local/lib/snort_dynamicengine"); rmdir_recursive("/usr/local/lib/snort_dynamicpreprocessor"); } /* Keep this as a last step */ if ($config['installedpackages']['snortglobal']['forcekeepsettings'] != 'on') { log_error(gettext("Not saving settings... all Snort configuration info and logs deleted...")); unset($config['installedpackages']['snortglobal']); unset($config['installedpackages']['snortsync']); unlink_if_exists("{$snort_rules_upd_log}"); log_error(gettext("[Snort] Flushing firewall table to remove addresses blocked by Snort...")); mwexec("/sbin/pfctl -t snort2c -T flush"); rmdir_recursive("{$snortlogdir}"); rmdir_recursive("{$g['vardb_path']}/snort"); log_error(gettext("[Snort] The package has been removed from this system...")); } /**********************************************************/ /* We're finished with conf partition mods, return to */ /* read-only if we changed it */ /**********************************************************/ if ($mounted_rw == TRUE) conf_mount_ro(); } function snort_prepare_rule_files($snortcfg, $snortcfgdir) { /***********************************************************/ /* This function builds a new set of enforcing rules for */ /* Snort and writes them to disk. */ /* */ /* $snortcfg --> pointer to applicable section of */ /* config.xml containing settings for */ /* the interface. */ /* */ /* $snortcfgdir --> pointer to physical directory on */ /* disk where Snort configuration is */ /* to be written. */ /***********************************************************/ global $g, $config, $rebuild_rules; $snortdir = SNORTDIR; $flowbit_rules_file = FLOWBITS_FILENAME; $snort_enforcing_rules_file = SNORT_ENFORCING_RULES_FILENAME; $enabled_files = array(); $all_rules = array(); $cat_mods = array(); $no_rules_defined = true; $enabled_rules = array(); /* If there is no reason to rebuild the rules, exit to save time. */ if (!$rebuild_rules) return; /* Log a message for rules rebuild in progress */ log_error(gettext("[Snort] Updating rules configuration for: " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . " ...")); // Get any automatic rule category enable/disable modifications // if auto-SID Mgmt is enabled and conf files exist for the interface. $cat_mods = snort_sid_mgmt_auto_categories($snortcfg, TRUE); /* Enable all, some or none of the SDF rules depending on setting. */ if ($snortcfg['sensitive_data'] == 'on' && $snortcfg['protect_preproc_rules'] != 'on') { if (file_exists(SNORTDIR."/preproc_rules/sensitive-data.rules")) { $sdf_alert_pattern="(".preg_replace("/,/","|",$snortcfg['sdf_alert_data_type']).")"; $sd_tmp_file=file(SNORTDIR."/preproc_rules/sensitive-data.rules"); $sd_tmp_new_file=""; foreach ($sd_tmp_file as $sd_tmp_line) $sd_tmp_new_file.=preg_match("/$sdf_alert_pattern/i",$sd_tmp_line) ? $sd_tmp_line : ""; @file_put_contents("{$snortcfgdir}/preproc_rules/sensitive-data.rules",$sd_tmp_new_file,LOCK_EX); } } elseif ($snortcfg['sensitive_data'] != 'on' && $snortcfg['protect_preproc_rules'] != 'on') { /* Setting is "off", so disable all SDF rules. */ $sedcmd = '/^alert.*classtype:sdf/s/^/#/'; @file_put_contents("{$g['tmp_path']}/sedcmd", $sedcmd); mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/sensitive-data.rules"); @unlink("{$g['tmp_path']}/sedcmd"); } /* Load the decoder, preprocessor and sensitive-data */ /* rules from the interface's preproc_rule directory */ /* into the $enabled_rules array. */ $enabled_rules = snort_load_rules_map("{$snortcfgdir}/preproc_rules/"); /* Only rebuild rules if some are selected or an IPS Policy is enabled */ if (!empty($snortcfg['rulesets']) || $snortcfg['ips_policy_enable'] == 'on') { $no_rules_defined = false; /* Load up all the text rules into a Rules Map array. */ $all_rules = snort_load_rules_map("{$snortdir}/rules/"); /* Create an array with the filenames of the enabled */ /* rule category files if we have any. */ if (!empty($snortcfg['rulesets'])) { foreach (explode("||", $snortcfg['rulesets']) as $file){ $category = basename($file, ".rules"); if (!is_array($enabled_files[$category])) $enabled_files[$category] = array(); $enabled_files[$category] = $file; } // Now adjust the list using any required changes as // determined by auto-SID Mgmt policy files. if (!empty($cat_mods)) { foreach ($cat_mods as $k => $action) { $key = basename($k, ".rules"); switch ($action) { case 'enabled': if (!isset($enabled_files[$key])) $enabled_files[$key] = $k; break; case 'disabled': if (isset($enabled_files[$key])) unset($enabled_files[$key]); break; default: break; } } } /****************************************************/ /* Walk the ALL_RULES map array and copy the rules */ /* matching our selected file categories to the */ /* ENABLED_RULES map array. */ /****************************************************/ foreach ($all_rules as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (isset($enabled_files[$v['category']])) { if (!is_array($enabled_rules[$k1])) $enabled_rules[$k1] = array(); if (!is_array($enabled_rules[$k1][$k2])) $enabled_rules[$k1][$k2] = array(); $enabled_rules[$k1][$k2]['rule'] = $v['rule']; $enabled_rules[$k1][$k2]['category'] = $v['category']; $enabled_rules[$k1][$k2]['disabled'] = $v['disabled']; $enabled_rules[$k1][$k2]['action'] = $v['action']; $enabled_rules[$k1][$k2]['flowbits'] = $v['flowbits']; } } } /* Release memory we no longer need. */ unset($enabled_files, $cat_mods, $rulem, $v); } /* Check if a pre-defined Snort VRT policy is selected. If so, */ /* add all the VRT policy rules to our enforcing rule set. */ if (!empty($snortcfg['ips_policy'])) { $policy_rules = snort_load_vrt_policy($snortcfg['ips_policy'], $all_rules); foreach ($policy_rules as $k1 => $policy) { foreach ($policy as $k2 => $p) { if (!is_array($enabled_rules[$k1])) $enabled_rules[$k1] = array(); if (!is_array($enabled_rules[$k1][$k2])) $enabled_rules[$k1][$k2] = array(); $enabled_rules[$k1][$k2]['rule'] = $p['rule']; $enabled_rules[$k1][$k2]['category'] = $p['category']; $enabled_rules[$k1][$k2]['disabled'] = $p['disabled']; $enabled_rules[$k1][$k2]['action'] = $p['action']; $enabled_rules[$k1][$k2]['flowbits'] = $p['flowbits']; } } unset($policy_rules, $policy, $p); } // Process any enablesid or disablesid modifications for the selected rules. // Do the auto-SID managment first, if enabled, then do any manual SID state changes. snort_auto_sid_mgmt($enabled_rules, $snortcfg, TRUE); snort_modify_sids($enabled_rules, $snortcfg); /* Check for and disable any rules dependent upon disabled preprocessors if */ /* this option is enabled for the interface. */ if ($snortcfg['preproc_auto_rule_disable'] == "on") { log_error('[Snort] Checking for rules dependent on disabled preprocessors for: ' . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . '...'); snort_filter_preproc_rules($snortcfg, $enabled_rules); } /* Write the enforcing rules file to the Snort interface's "rules" directory. */ snort_write_enforcing_rules_file($enabled_rules, "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); /* If auto-flowbit resolution is enabled, generate the dependent flowbits rules file. */ if ($snortcfg['autoflowbitrules'] == 'on') { log_error('[Snort] Enabling any flowbit-required rules for: ' . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . '...'); $fbits = snort_resolve_flowbits($all_rules, $enabled_rules); /* Check for and disable any flowbit-required rules the user has */ /* manually forced to a disabled state. */ snort_modify_sids($fbits, $snortcfg); /* Check for and disable any flowbit-required rules dependent upon */ /* disabled preprocessors if this option is enabled for the interface. */ if ($snortcfg['preproc_auto_rule_disable'] == "on") { log_error('[Snort] Checking flowbit rules dependent on disabled preprocessors for: ' . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . '...'); snort_filter_preproc_rules($snortcfg, $fbits, true); } snort_write_flowbit_rules_file($fbits, "{$snortcfgdir}/rules/{$flowbit_rules_file}"); unset($fbits); } else /* Just put an empty file to always have the file present */ snort_write_flowbit_rules_file(array(), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); unset($all_rules); } // If no rule categories were enabled, then use auto-SID management if enabled, since it may enable some rules elseif ($config['installedpackages']['snortglobal']['auto_manage_sids'] == 'on' && (!empty($snortcfg['disable_sid_file']) || !empty($snortcfg['enable_sid_file']) || !empty($snortcfg['modify_sid_file']))) { snort_auto_sid_mgmt($enabled_rules, $snortcfg, TRUE); if (!empty($enabled_rules)) { // Auto-SID management generated some rules, so use them $no_rules_defined = false; snort_modify_sids($enabled_rules, $snortcfg); // Write the enforcing rules file to the Snort interface's "rules" directory. snort_write_enforcing_rules_file($enabled_rules, "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); // If auto-flowbit resolution is enabled, generate the dependent flowbits rules file. if ($snortcfg['autoflowbitrules'] == 'on') { log_error('[Snort] Enabling any flowbit-required rules for: ' . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . '...'); // Load up all rules into a Rules Map array for flowbits assessment $all_rules = snort_load_rules_map("{$snortdir}/rules/"); $fbits = snort_resolve_flowbits($all_rules, $enabled_rules); // Check for and disable any flowbit-required rules the // user has manually forced to a disabled state. snort_modify_sids($fbits, $snortcfg); snort_write_flowbit_rules_file($fbits, "{$snortcfgdir}/rules/{$flowbit_rules_file}"); unset($all_rules, $fbits); } else // Just put an empty file to always have the file present snort_write_flowbit_rules_file(array(), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); } else { snort_write_enforcing_rules_file(array(), "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); snort_write_flowbit_rules_file(array(), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); } } else { /* No regular rules or policy were selected, so just use the decoder and preproc rules */ snort_write_enforcing_rules_file($enabled_rules, "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); snort_write_flowbit_rules_file(array(), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); } if (!empty($snortcfg['customrules'])) { @file_put_contents("{$snortcfgdir}/rules/custom.rules", base64_decode($snortcfg['customrules'])); $no_rules_defined = false; } else @file_put_contents("{$snortcfgdir}/rules/custom.rules", ""); /* Log a warning if the interface has no rules defined or enabled */ if ($no_rules_defined) log_error(gettext("[Snort] Warning - no text rules or IPS-Policy selected for: " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . " ...")); /* Build a new sid-msg.map file from the enabled */ /* rules and copy it to the interface directory. */ log_error(gettext("[Snort] Building new sid-msg.map file for " . convert_friendly_interface_to_friendly_descr($snortcfg['interface']) . "...")); snort_build_sid_msg_map("{$snortcfgdir}/rules/", "{$snortcfgdir}/sid-msg.map"); } function snort_filter_preproc_rules($snortcfg, &$active_rules, $persist_log = false) { /**************************************************/ /* This function checks the $active_rules array */ /* for rule options dependent upon preprocessors. */ /* Rules with rule options dependent upon any */ /* non-enabled preprocessors are disabled to stop */ /* start-up errors from unknown rule options. */ /* */ /* $snortcfg --> config parameters array for */ /* the interface. */ /* */ /* $active_rules --> rules_map array of enabled */ /* rules for the interface. */ /* */ /* $persist_log --> flag indicating if new log */ /* file should be created or */ /* the existing one appended */ /* to. */ /* */ /* NOTE: This feature must be enabled in the GUI */ /* by the user. Use of this feature can */ /* severely degrade Snort's ability to */ /* detect threats by disabling potentially */ /* crucial detection rules. */ /**************************************************/ global $config; $snortlogdir = SNORTLOGDIR; $disabled_count = 0; $log_msg = array(); /* Check if no rules or if this option is disabled */ if (empty($active_rules) || $snortcfg['preproc_auto_rule_disable'] <> 'on') return; /*************************************************** * Construct an array of rule options with their * * associated preprocessors. * * * * IMPORTANT -- Keep this part of the code current * * with changes to preprocessor rule options in * * Snort VRT rules. * * * * * * Format of array is: * * "rule_option" => "dependent_preprocessor" * * * * Last Update: 10/30/2014 * * * * Added: appid: detection option * * * ***************************************************/ $rule_opts_preprocs = array("ssl_version:" => "ssl_preproc","ssl_state:" => "ssl_preproc", "service ssl" => "ssl_preproc", "service ftp" => "ftp_preprocessor", "service telnet" => "ftp_preprocessor", "service dns" => "dns_preprocessor", "dce_iface:" => "dce_rpc_2", "dce_opnum:" => "dce_rpc_2", "dce_stub_data;" => "dce_rpc_2", "sd_pattern:" => "sensitive_data", "sip_method:" => "sip_preproc", "sip_stat_code:" => "sip_preproc", "sip_header;" => "sip_preproc", "sip_body;" => "sip_preproc", "gtp_type:" => "gtp_preproc", "gtp_info:" => "gtp_preproc", "gtp_version:" => "gtp_preproc", "modbus_func:" => "modbus_preproc", "modbus_unit:" => "modbus_preproc", "modbus_data;" => "modbus_preproc", "dnp3_func:" => "dnp3_preproc", "dnp3_obj:" => "dnp3_preproc", "dnp3_ind:" => "dnp3_preproc", "dnp3_data;" => "dnp3_preproc", "http_client_body;" => "http_inspect", "http_cookie;" => "http_inspect", "http_raw_cookie;" => "http_inspect", "http_header;" => "http_inspect", "http_raw_header;" => "http_inspect", "http_method;" => "http_inspect", "http_uri;" => "http_inspect", "http_raw_uri;" => "http_inspect", "http_stat_code;" => "http_inspect", "http_stat_msg;" => "http_inspect", "uricontent:" => "http_inspect", "urilen:" => "http_inspect", "http_encode;" => "http_inspect", "service http" => "http_inspect", "service imap" => "imap_preproc", "service pop2" => "pop_preproc", "service pop3" => "pop_preproc", "service smtp" => "smtp_preprocessor", "appid:" => "appid_preproc" ); /*************************************************** * Iterate the enabled rules, and check for rule * * options that depend on disabled preprocessors. * * Disable any of these preprocessor-dependent * * rules we find. Once we find at least one * * reason to disable the rule, stop further checks * * and go to the next rule. * ***************************************************/ foreach ($active_rules as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { /* If rule is already disabled, skip it. */ if ($v['disabled'] == 1) continue; foreach ($rule_opts_preprocs as $opt => $preproc) { $pcre = "/\s*\b" . preg_quote($opt) . "/i"; if (($snortcfg[$preproc] != 'on') && preg_match($pcre, $v['rule'])) { $active_rules[$k1][$k2]['rule'] = "# " . $v['rule']; $active_rules[$k1][$k2]['disabled'] = 1; $disabled_count++; /* Accumulate auto-disabled rules for logging */ $tmp = $active_rules[$k1][$k2]['category'] . ","; $tmp .= "{$k1}:{$k2},{$preproc},{$opt}"; $log_msg[] = $tmp; break; } } } } /* Release memory we no longer need. */ unset($rulem, $v, $preproc); /***************************************************************/ /* If we are persisting the log from the last pass, then open */ /* the log file in append mode. Otherwise open in overwrite */ /* to clear the log in case we have zero disabled rules. */ /* */ /* Typically "persist log" mode is used on the second pass */ /* when flowbit-required rules are being assessed after the */ /* primary enforcing rules have been evaluated. */ /***************************************************************/ $iface = convert_friendly_interface_to_friendly_descr($snortcfg['interface']); $file = "{$snortlogdir}/{$iface}_disabled_preproc_rules.log"; if ($persist_log) $fp = fopen($file, 'a'); else $fp = fopen($file, 'w'); /***************************************************/ /* Log a warning if we auto-disabled any rules */ /* just so the user is aware protection is less */ /* than optimal with the preprocessors disabled. */ /***************************************************/ if ($disabled_count > 0) { log_error(gettext("[Snort] Warning: auto-disabled {$disabled_count} rules due to disabled preprocessor dependencies.")); natcasesort($log_msg); if ($fp) { /* Only write the header when not persisting the log */ if (!$persist_log) { @fwrite($fp, "#\n# Run Time: " . date("Y-m-d H:i:s") . "\n#\n"); @fwrite($fp, "#\n# These rules were auto-disabled because they contain options or operators\n"); @fwrite($fp, "# dependent on preprocessors that are currently NOT ENABLED on the Preprocessors\n"); @fwrite($fp, "# tab. Without these dependent preprocessors enabled, Snort would fail to start\n"); @fwrite($fp, "# if the rules listed below were enabled. Therefore the listed rules have been\n"); @fwrite($fp, "# automatically disabled. This behavior is controlled by the Auto-Rule Disable\n"); @fwrite($fp, "# feature on the Preprocessors tab.\n#\n"); @fwrite($fp, "# WARNING: Using the auto-disable rule feature is not recommended because it can\n"); @fwrite($fp, "# significantly reduce the threat detection capabilities of Snort!\n#"); @fwrite($fp, "\n# In the list below, the PREPROCESSOR column is the disabled preprocessor that\n"); @fwrite($fp, "# triggered the auto-disable of the rule represented by GID:SID. The RULE OPTION\n"); @fwrite($fp, "# column shows the specific rule option or content modifier contained within\n"); @fwrite($fp, "# the rule text that requires the preprocessor be enabled in order to execute.\n#"); @fwrite($fp, "\n# RULE CATEGORY GID:SID PREPROCESSOR RULE OPTION\n"); } foreach ($log_msg as $m) { $tmp = explode(",", $m); @fwrite($fp, sprintf("%-30s %-10s %-20s %s", $tmp[0], $tmp[1], $tmp[2], $tmp[3]) . "\n"); } } log_error(gettext("[Snort] See '{$file}' for list of auto-disabled rules.")); unset($log_msg); } if ($fp) fclose($fp); } function snort_generate_conf($snortcfg) { /********************************************************/ /* This function generates the snort.conf file for the */ /* passed interface using stored values from the Snort */ /* package configuration. */ /********************************************************/ global $config, $g, $rebuild_rules; // Exit if there are no configured Snort interfaces if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; $snortdir = SNORTDIR; $snortlibdir = SNORT_PBI_BASEDIR . "lib"; $snortlogdir = SNORTLOGDIR; $flowbit_rules_file = FLOWBITS_FILENAME; $snort_enforcing_rules_file = SNORT_ENFORCING_RULES_FILENAME; $if_real = get_real_interface($snortcfg['interface']); $snort_uuid = $snortcfg['uuid']; $snortcfgdir = "{$snortdir}/snort_{$snort_uuid}_{$if_real}"; // Pull in the PHP code that generates required string variables include("/usr/local/pkg/snort/snort_generate_conf.php"); // Pull in the boilerplate template for the snort.conf // configuration file. The contents of the template along // with substituted variables is stored in $snort_conf_text // (which is defined in the included file). include("/usr/local/pkg/snort/snort_conf_template.inc"); // Write out snort.conf file using contents of $snort_conf_text @file_put_contents("{$snortcfgdir}/snort.conf", $snort_conf_text); // Create the actual rules files and save them in the interface directory snort_prepare_rule_files($snortcfg, $snortcfgdir); // Clean up variables we no longer need and free memory unset($snort_conf_text, $selected_rules_sections, $suppress_file_name, $snort_misc_include_rules, $spoink_type, $snortunifiedlog_type, $alertsystemlog_type); unset($home_net, $external_net, $ipvardef, $portvardef); } function snort_remove_dead_rules() { /********************************************************/ /* This function removes dead and deprecated rules */ /* category files from the base Snort rules directory */ /* and from the RULESETS setting of each interface. */ /* The file "deprecated_rules", if it exists, is used */ /* to determine which rules files to remove. */ /********************************************************/ global $config, $g; $rulesdir = SNORTDIR . "/rules/"; $count = 0; $cats = array(); // If there is no "deprecated_rules" file, then exit if (!file_exists("{$rulesdir}deprecated_rules")) return; // Open a SplFileObject to read in deprecated rules $file = new SplFileObject("{$rulesdir}/deprecated_rules"); $file->setFlags(SplFileObject::READ_AHEAD | SplFileObject::SKIP_EMPTY | SplFileObject::DROP_NEW_LINE); while (!$file->eof()) { $line = $file->fgets(); // Skip any lines with just spaces if (trim($line) == "") continue; // Skip any comment lines starting with '#' if (preg_match('/^\s*\#+/', $line)) continue; $cats[] = $line; } // Close the SplFileObject since we are finished with it $file = null; // Delete any dead rules files from the Snort RULES directory foreach ($cats as $file) { if (file_exists("{$rulesdir}{$file}")) $count++; unlink_if_exists("{$rulesdir}{$file}"); } // Log how many obsoleted files were removed log_error(gettext("[Snort] Removed {$count} obsoleted rules category files.")); // Now remove any dead rules files from the interface configurations if (!empty($cats) && is_array($config['installedpackages']['snortglobal']['rule'])) { foreach ($config['installedpackages']['snortglobal']['rule'] as &$iface) { $enabled_rules = explode("||", $iface['rulesets']); foreach ($enabled_rules as $k => $v) { foreach ($cats as $d) { if (strpos(trim($v), $d) !== false) unset($enabled_rules[$k]); } } $iface['rulesets'] = implode("||", $enabled_rules); } } // Clean up unset($cats, $enabled_rules); } /* Uses XMLRPC to synchronize the changes to a remote node */ function snort_sync_on_changes() { global $config, $g; /* Do not attempt a package sync while booting up or installing package */ if ($g['booting'] || $g['snort_postinstall']) { log_error("[snort] No xmlrpc sync to CARP targets when booting up or during package reinstallation."); return; } if (is_array($config['installedpackages']['snortsync']['config'])){ $snort_sync=$config['installedpackages']['snortsync']['config'][0]; $synconchanges = $snort_sync['varsynconchanges']; $synctimeout = $snort_sync['varsynctimeout']; $syncdownloadrules = $snort_sync['vardownloadrules']; switch ($synconchanges){ case "manual": if (is_array($snort_sync[row])){ $rs=$snort_sync[row]; } else{ log_error("[snort] xmlrpc sync is enabled but there are no hosts configured as replication targets."); return; } break; case "auto": if (is_array($config['installedpackages']['carpsettings']) && is_array($config['installedpackages']['carpsettings']['config'])){ $system_carp=$config['installedpackages']['carpsettings']['config'][0]; $rs[0]['varsyncipaddress']=$system_carp['synchronizetoip']; $rs[0]['varsyncusername']=$system_carp['username']; $rs[0]['varsyncpassword']=$system_carp['password']; $rs[0]['varsyncsnortstart']="no"; if ($system_carp['synchronizetoip'] ==""){ log_error("[snort] xmlrpc sync is enabled but there are no system backup hosts configured as replication targets."); return; } } else{ log_error("[snort] xmlrpc sync is enabled but there are no system backup hosts configured as replication targets."); return; } break; default: return; break; } if (is_array($rs)){ log_error("[snort] Snort pkg xmlrpc sync is starting."); foreach($rs as $sh){ if ($sh['varsyncsnortstart']) $syncstartsnort = $sh['varsyncsnortstart']; else $syncstartsnort = "OFF"; $sync_to_ip = $sh['varsyncipaddress']; $port = $sh['varsyncport']; $password = $sh['varsyncpassword']; if($sh['varsyncusername']) $username = $sh['varsyncusername']; else $username = 'admin'; if($password && $sync_to_ip) snort_do_xmlrpc_sync($syncdownloadrules, $sync_to_ip, $port, $username, $password, $synctimeout, $syncstartsnort); } log_error("[snort] Snort pkg xmlrpc sync completed."); } } } /* Do the actual XMLRPC sync */ function snort_do_xmlrpc_sync($syncdownloadrules, $sync_to_ip, $port, $username, $password, $synctimeout, $syncstartsnort) { global $config, $g; /* Do not attempt a package sync while booting up or installing package */ if ($g['booting'] || $g['snort_postinstall']) { log_error("[snort] No xmlrpc sync to CARP targets when booting up or during package reinstallation."); return; } if(!$username || !$password || !$sync_to_ip) { log_error("[snort] A required XMLRPC sync parameter (user, host IP or password) is empty ... aborting pkg sync"); return; } /* Test key variables and set defaults if empty */ if(!$synctimeout) $synctimeout=150; $xmlrpc_sync_neighbor = $sync_to_ip; if($config['system']['webgui']['protocol'] != "") { $synchronizetoip = $config['system']['webgui']['protocol']; $synchronizetoip .= "://"; } if ($port == "") $port = $config['system']['webgui']['port']; /* if port is empty let's rely on the protocol selection */ if($port == "") { if($config['system']['webgui']['protocol'] == "http") $port = "80"; else $port = "443"; } $synchronizetoip .= $sync_to_ip; $url = $synchronizetoip; /*************************************************/ /* Send over any auto-SID management files */ /*************************************************/ $sid_files = glob(SNORT_SID_MODS_PATH . '*'); foreach ($sid_files as $file) { $content = base64_encode(file_get_contents($file)); $payload = "@file_put_contents('{$file}', base64_decode('{$content}'));"; /* assemble xmlrpc payload */ $method = 'pfsense.exec_php'; $params = array( XML_RPC_encode($password), XML_RPC_encode($payload) ); log_error("[snort] Snort XMLRPC CARP sync sending auto-SID conf files to {$url}:{$port}."); $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); $resp = $cli->send($msg, $synctimeout); $error = ""; if(!$resp) { $error = "A communications error occurred while attempting Snort XMLRPC CARP sync with {$url}:{$port}. Failed to transfer file: " . basename($file); log_error($error); file_notice("sync_settings", $error, "Snort Settings Sync", ""); } elseif($resp->faultCode()) { $error = "An error code was received while attempting Snort XMLRPC CARP sync with {$url}:{$port}. Failed to transfer file: " . basename($file) . " - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "Snort Settings Sync", ""); } } if (!empty($sid_files) && $error == "") log_error("[snort] Snort pkg XMLRPC CARP sync auto-SID conf files success with {$url}:{$port} (pfsense.exec_php)."); /*************************************************/ /* Send over any IPREP IP List files */ /*************************************************/ $sid_files = glob(SNORT_IPREP_PATH . '*'); foreach ($sid_files as $file) { $content = base64_encode(file_get_contents($file)); $payload = "@file_put_contents('{$file}', base64_decode('{$content}'));"; /* assemble xmlrpc payload */ $method = 'pfsense.exec_php'; $params = array( XML_RPC_encode($password), XML_RPC_encode($payload) ); log_error("[snort] Snort XMLRPC CARP sync sending IPREP files to {$url}:{$port}."); $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); $resp = $cli->send($msg, $synctimeout); $error = ""; if(!$resp) { $error = "A communications error occurred while attempting Snort XMLRPC CARP sync with {$url}:{$port}. Failed to transfer file: " . basename($file); log_error($error); file_notice("sync_settings", $error, "Snort Settings Sync", ""); } elseif($resp->faultCode()) { $error = "An error code was received while attempting Snort XMLRPC CARP sync with {$url}:{$port}. Failed to transfer file: " . basename($file) . " - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "Snort Settings Sync", ""); } } if (!empty($sid_files) && $error == "") log_error("[snort] Snort pkg XMLRPC CARP sync IPREP files success with {$url}:{$port} (pfsense.exec_php)."); /**************************************************/ /* Send over the portion of the */ /* config.xml. $xml will hold section to sync. */ /**************************************************/ $xml = array(); $xml['snortglobal'] = $config['installedpackages']['snortglobal']; /* assemble xmlrpc payload */ $params = array( XML_RPC_encode($password), XML_RPC_encode($xml) ); log_error("[snort] Beginning Snort pkg configuration XMLRPC sync to {$url}:{$port}."); $method = 'pfsense.merge_installedpackages_section_xmlrpc'; $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); /* send our XMLRPC message and timeout after defined sync timeout value*/ $resp = $cli->send($msg, $synctimeout); if(!$resp) { $error = "A communications error occurred while attempting snort XMLRPC sync with {$url}:{$port}."; log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } elseif($resp->faultCode()) { $error = "An error code was received while attempting snort XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } else { log_error("[snort] Snort pkg configuration XMLRPC sync successfully completed with {$url}:{$port}."); } $downloadrulescmd = ""; if ($syncdownloadrules == "yes") { $downloadrulescmd = "log_error(gettext(\"[snort] XMLRPC pkg sync: Update of downloaded rule sets requested...\"));\n"; $downloadrulescmd .= "\tinclude_once(\"/usr/local/pkg/snort/snort_check_for_rule_updates.php\");\n"; } $snortstart = ""; if ($syncstartsnort == "ON") { $snortstart = "log_error(gettext(\"[snort] XMLRPC pkg sync: Starting Snort if not running...\"));\n"; $snortstart .= "\tsnort_start_all_interfaces(TRUE);\n"; } /*************************************************/ /* Build a series of commands as a PHP file for */ /* the secondary host to execute to load the new */ /* settings. */ /*************************************************/ $snort_sync_cmd = << EOD; /*************************************************/ /* First, have target host write the commands */ /* to a PHP file in the /tmp directory. */ /*************************************************/ $execcmd = "file_put_contents('/tmp/snort_sync_cmds.php', '{$snort_sync_cmd}');"; /* assemble xmlrpc payload */ $method = 'pfsense.exec_php'; $params = array( XML_RPC_encode($password), XML_RPC_encode($execcmd) ); log_error("[snort] Snort XMLRPC sending reload configuration cmd set as a file to {$url}:{$port}."); $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); $resp = $cli->send($msg, $synctimeout); if(!$resp) { $error = "A communications error occurred while attempting snort XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } elseif($resp->faultCode()) { $error = "An error code was received while attempting snort XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } else { log_error("[snort] Snort pkg XMLRPC reload configuration success with {$url}:{$port} (pfsense.exec_php)."); } /*************************************************/ /* Now assemble a command to execute the */ /* previously sent PHP file in the background. */ /*************************************************/ $execcmd = "exec(\"/usr/local/bin/php -f '/tmp/snort_sync_cmds.php' > /dev/null 2>&1 &\");"; $params2 = array( XML_RPC_encode($password), XML_RPC_encode($execcmd) ); log_error("[snort] Snort XMLRPC sending {$url}:{$port} cmd to execute configuration reload."); $msg2 = new XML_RPC_Message($method, $params2); $resp = $cli->send($msg2, $synctimeout); if(!$resp) { $error = "A communications error occurred while attempting snort XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } elseif($resp->faultCode()) { $error = "An error code was received while attempting snort XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } else { log_error("[snort] Snort pkg XMLRPC reload configuration success with {$url}:{$port} (pfsense.exec_php)."); } } ?>