= 8.3) { exec("/usr/local/sbin/pbi_info | grep 'snort-{$snort_version}' | xargs /usr/local/sbin/pbi_info | awk '/Prefix/ {print $2}'",$pbidirarray); $snort_pbidir = "{$pbidirarray[0]}"; /* In case this is an initial Snort install and pbi_info() above returned null, set a sane default value */ if (empty($snort_pbidir)) $snort_pbidir = "/usr/pbi/snort-" . php_uname("m"); define("SNORTDIR", "{$snort_pbidir}/etc/snort"); define("SNORTLIBDIR", "{$snort_pbidir}/lib/snort"); } else { define("SNORTDIR", "/usr/local/etc/snort"); define("SNORTLIBDIR", "/usr/local/lib/snort"); } define("SNORTLOGDIR", "/var/log/snort"); /* Important file definitions */ $snort_rules_file = "snortrules-snapshot-2941.tar.gz"; $emerging_threats_version = "2.9.0"; $emergingthreats_filename = "emerging.rules.tar.gz"; $snort_community_rules_url = "https://s3.amazonaws.com/snort-org/www/rules/community/"; $snort_community_rules_filename = "community-rules.tar.gz"; $flowbit_rules_file = "flowbit-required.rules"; $snort_enforcing_rules_file = "snort.rules"; $snort_rules_upd_log = SNORTLOGDIR; $snort_rules_upd_log .= "/snort_rules_update.log"; /* Rebuild Rules Flag -- if "on", rebuild enforcing rules and flowbit-rules files */ $rebuild_rules = "off"; /* Post-install Flag -- normally "false" except during post-install of package */ $is_postinstall = false; if (!is_array($config['installedpackages']['snortglobal'])) $config['installedpackages']['snortglobal'] = array(); function snort_get_blocked_ips() { $blocked_ips = ""; exec('/sbin/pfctl -t snort2c -T show', $blocked_ips); $blocked_ips_array = array(); if (!empty($blocked_ips)) { $blocked_ips_array = array(); if (is_array($blocked_ips)) { foreach ($blocked_ips as $blocked_ip) { if (empty($blocked_ip)) continue; $blocked_ips_array[] = trim($blocked_ip, " \n\t"); } } } return $blocked_ips_array; } function snort_get_rule_part($source, $beginning, $ending, $start_pos) { $beginning_pos = strpos($source, $beginning, $start_pos); if (!$beginning_pos) return false; $middle_pos = $beginning_pos + strlen($beginning); $source = substr($source, $middle_pos); $ending_pos = strpos($source, $ending, 0); if (!$ending_pos) return false; return substr($source, 0, $ending_pos); } function snort_generate_id() { global $config; $snortglob = $config['installedpackages']['snortglobal']['rule']; while (true) { $snort_uuid = mt_rand(1, 65535); foreach ($snortglob as $value) { if ($value['uuid'] == $snort_uuid) continue 2; } break; } return $snort_uuid; } function snort_load_suppress_sigs($snortcfg) { global $config; /**********************************************************/ /* This function loads the GEN_ID and SIG_ID for all the */ /* suppressed alert entries from the Suppression List of */ /* the passed Snort interface. The results are returned */ /* in an array with GEN_ID and SIG_ID as the keys. */ /**********************************************************/ $suppress = array(); if (!is_array($config['installedpackages']['snortglobal']['suppress'])) return; if (!is_array($config['installedpackages']['snortglobal']['suppress']['item'])) return; $a_suppress = $config['installedpackages']['snortglobal']['suppress']['item']; foreach ($a_suppress as $a_id => $alist) { if ($alist['name'] == $snortcfg['suppresslistname']) { if (!empty($alist['suppresspassthru'])) { $tmplist = str_replace("\r", "", base64_decode($alist['suppresspassthru'])); $tmp = explode("\n", $tmplist); foreach ($tmp as $line) { // Skip any blank lines if (trim($line, " \n") == "") continue; // Skip any comment lines if (preg_match('/^\s*#/', $line)) continue; if (preg_match('/gen_id\b\s*(\d+),\s*sig_id\b\s*(\d+)/i', $line, $matches)) { $genid = $matches[1]; $sigid = $matches[2]; if (!empty($genid) && !empty($sigid)) $suppress[$genid][$sigid] = "suppress"; } } unset($tmp); } break; } } unset($alist); return $suppress; } /* func builds custom white lists */ function snort_find_list($find_name, $type = 'whitelist') { global $config; $snortglob = $config['installedpackages']['snortglobal']; if (!is_array($snortglob[$type])) return ""; if (!is_array($snortglob[$type]['item'])) return ""; foreach ($snortglob[$type]['item'] as $value) { if ($value['name'] == $find_name) return $value; } return array(); } /* func builds custom whitelists and the HOME_NET variable */ function snort_build_list($snortcfg, $listname = "", $whitelist = false) { global $config, $g; global $aliastable, $filterdns; $home_net = array(); if ($listname == 'default' || empty($listname)) { $localnet = 'yes'; $wanip = 'yes'; $wangw = 'yes'; $wandns = 'yes'; $vips = 'yes'; $vpns = 'yes'; } else { $list = snort_find_list($listname); if (empty($list)) return $list; $localnet = $list['localnets']; $wanip = $list['wanips']; $wangw = $list['wangateips']; $wandns = $list['wandnsips']; $vips = $list['vips']; $vpns = $list['vpnips']; if (!empty($list['address']) && is_alias($list['address'])) { $home_net = explode(" ", trim(filter_expand_alias($list['address']))); } } /* Always add loopback to HOME_NET and whitelist (ftphelper) */ if (!in_array("127.0.0.1", $home_net)) $home_net[] = "127.0.0.1"; /********************************************************************/ /* Always put the interface running Snort in HOME_NET and whitelist */ /* unless it's the WAN. WAN options are handled further down. */ /********************************************************************/ $snortip = get_interface_ip($snortcfg['interface']); if (is_ipaddr($snortip)) { if ($snortcfg['interface'] <> "wan") { $sn = get_interface_subnet($snortcfg['interface']); $ip = gen_subnet($snortip, $sn) . "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } if (function_exists('get_interface_ipv6')) { $snortip = get_interface_ipv6($snortcfg['interface']); if (is_ipaddrv6($snortip)) { if ($snortcfg['interface'] <> "wan") { $sn = get_interface_subnetv6($snortcfg['interface']); $ip = gen_subnetv6($snortip, $sn). "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } } if ($localnet == 'yes') { /*************************************************************************/ /* Iterate through the interface list and write out whitelist items and */ /* also compile a HOME_NET list of all the local interfaces for snort. */ /* Skip the WAN interface as we do not typically want that whole subnet */ /* whitelisted (just the interface IP itself). */ /*************************************************************************/ if (function_exists('get_configured_interface_list')) $int_array = get_configured_interface_list(); else { $int_array = array('wan', 'lan'); for ($j = 1; isset ($config['interfaces']['opt' . $j]); $j++) { if(isset($config['interfaces']['opt' . $j]['enable'])) $int_array[] = "opt{$j}"; } } foreach ($int_array as $int) { if ($int == "wan") continue; $subnet = get_interface_ip($int); if (is_ipaddr($subnet)) { $sn = get_interface_subnet($int); $ip = gen_subnet($subnet, $sn) . "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } if (function_exists("get_interface_ipv6")) { if ($int == "wan") continue; $subnet = get_interface_ipv6($int); if (is_ipaddrv6($subnet)) { $sn = get_interface_subnetv6($int); $ip = gen_subnetv6($subnet, $sn). "/{$sn}"; if (!in_array($ip, $home_net)) $home_net[] = $ip; } } } } /* Grab the default gateway if set */ $default_gw = exec("/sbin/route -n get default |grep 'gateway:' | /usr/bin/awk '{ print $2 }'"); if ($wanip == 'yes') { $ip = get_interface_ip("wan"); if (is_ipaddr($ip)) { if (!in_array($ip, $home_net)) $home_net[] = $ip; } if (function_exists("get_interface_ipv6")) { $ip = get_interface_ipv6("wan"); if (is_ipaddrv6($ip)) { if (!in_array($ip, $home_net)) $home_net[] = $ip; } } } if ($wangw == 'yes') { if (is_ipaddr($default_gw) && !in_array($default_gw, $home_net)) $home_net[] = $default_gw; /* Get any other interface gateway and put in $HOME_NET if not there already */ $gw = get_interface_gateway($snortcfg['interface']); if (is_ipaddr($gw) && !in_array($gw, $home_net)) $home_net[] = $gw; if (function_exists("get_interface_gatewayv6")) { $gw = get_interface_gatewayv6($snortcfg['interface']); if (is_ipaddrv6($gw) && !in_array($gw, $home_net)) $home_net[] = $gw; } } if ($wandns == 'yes') { /* Add DNS server for WAN interface to whitelist */ $dns_servers = get_dns_servers(); foreach ($dns_servers as $dns) { if ($dns && !in_array($dns, $home_net)) $home_net[] = $dns; } } if($vips == 'yes') { /* iterate all vips and add to whitelist */ if (is_array($config['virtualip']) && is_array($config['virtualip']['vip'])) { foreach($config['virtualip']['vip'] as $vip) { if ($vip['subnet'] && $vip['mode'] != 'proxyarp') { if (!in_array("{$vip['subnet']}/{$vip['subnet_bits']}", $home_net)) $home_net[] = "{$vip['subnet']}/{$vip['subnet_bits']}"; } } } } /* grab a list of vpns and whitelist if user desires added by nestorfish 954 */ if ($vpns == 'yes') { $vpns_list = filter_get_vpns_list(); if (!empty($vpns_list)) { /* Convert the returned space-delimited string to an array */ /* and then add each VPN address to our HOME_NET array. */ $vpns = explode(" ", $vpns_list); foreach ($vpns as $vpn) $home_net[] = trim($vpn); unset($vpns, $vpns_list); } } $valresult = array(); foreach ($home_net as $vald) { if (empty($vald)) continue; $vald = trim($vald); if (empty($valresult[$vald])) $valresult[$vald] = $vald; } /* Release memory no longer required */ unset($home_net); /* Sort the list and return it */ natsort($valresult); return $valresult; } /* checks to see if service is running yes/no and stop/start */ function snort_is_running($snort_uuid, $if_real, $type = 'snort') { global $config, $g; if (file_exists("{$g['varrun_path']}/{$type}_{$if_real}{$snort_uuid}.pid") && isvalidpid("{$g['varrun_path']}/{$type}_{$if_real}{$snort_uuid}.pid")) return 'yes'; return 'no'; } function snort_barnyard_stop($snortcfg, $if_real) { global $config, $g; $snort_uuid = $snortcfg['uuid']; if (file_exists("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid") && isvalidpid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Barnyard2 STOP for {$snortcfg['descr']}({$if_real})..."); killbypid("{$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid"); } } function snort_stop($snortcfg, $if_real) { global $config, $g; $snort_uuid = $snortcfg['uuid']; if (file_exists("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid") && isvalidpid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Snort STOP for {$snortcfg['descr']}({$if_real})..."); killbypid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid"); } snort_barnyard_stop($snortcfg, $if_real); } function snort_barnyard_start($snortcfg, $if_real) { global $config, $g; $snortdir = SNORTDIR; $snort_uuid = $snortcfg['uuid']; /* define snortbarnyardlog_chk */ if ($snortcfg['barnyard_enable'] == 'on' && !empty($snortcfg['barnyard_mysql'])) { log_error("[Snort] Barnyard2 START for {$snortcfg['descr']}({$if_real})..."); exec("/usr/local/bin/barnyard2 -r {$snort_uuid} -f \"snort_{$snort_uuid}_{$if_real}.u2\" --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d /var/log/snort/snort_{$if_real}{$snort_uuid} -D -q"); } } function snort_start($snortcfg, $if_real) { global $config, $g; $snortdir = SNORTDIR; $snort_uuid = $snortcfg['uuid']; if ($snortcfg['enable'] == 'on') { log_error("[Snort] Snort START for {$snortcfg['descr']}({$if_real})..."); exec("/usr/local/bin/snort -R {$snort_uuid} -D -q -l /var/log/snort/snort_{$if_real}{$snort_uuid} --pid-path {$g['varrun_path']} --nolock-pidfile -G {$snort_uuid} -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/snort.conf -i {$if_real}"); } else return; snort_barnyard_start($snortcfg, $if_real); } /**************************************************************/ /* This function sends a SIGHUP to the Snort instance on the */ /* passed interface to cause Snort to reload and parse the */ /* running configuration without stopping packet processing. */ /* It also executes the reload as a background process and */ /* returns control immediately to the caller. */ /**************************************************************/ function snort_reload_config($snortcfg, $if_real) { global $config, $g; $snortdir = SNORTDIR; $snort_uuid = $snortcfg['uuid']; /******************************************************/ /* Only send the SIGHUP if Snort is running and we */ /* can find a valid PID for the process. */ /******************************************************/ if (file_exists("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid") && isvalidpid("{$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid")) { log_error("[Snort] Snort RELOAD CONFIG for {$snortcfg['descr']}({$if_real})..."); exec("/bin/pkill -SIGHUP -F {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid 2>&1 &"); } } function snort_get_friendly_interface($interface) { if (function_exists('convert_friendly_interface_to_friendly_descr')) $iface = convert_friendly_interface_to_friendly_descr($interface); else { if (!$interface || ($interface == "wan")) $iface = "WAN"; else if(strtolower($interface) == "lan") $iface = "LAN"; else if(strtolower($interface) == "pppoe") $iface = "PPPoE"; else if(strtolower($interface) == "pptp") $iface = "PPTP"; else $iface = strtoupper($interface); } return $iface; } /* get the real iface name of wan */ function snort_get_real_interface($interface) { global $config; $lc_interface = strtolower($interface); if (function_exists('get_real_interface')) return get_real_interface($lc_interface); else { if ($lc_interface == "lan") { if ($config['inerfaces']['lan']) return $config['interfaces']['lan']['if']; return $interface; } if ($lc_interface == "wan") return $config['interfaces']['wan']['if']; $ifdescrs = array(); for ($j = 1; isset($config['interfaces']['opt' . $j]); $j++) { $ifname = "opt{$j}"; if(strtolower($ifname) == $lc_interface) return $config['interfaces'][$ifname]['if']; if(isset($config['interfaces'][$ifname]['descr']) && (strtolower($config['interfaces'][$ifname]['descr']) == $lc_interface)) return $config['interfaces'][$ifname]['if']; } } return $interface; } /* this code block is for deleteing logs while keeping the newest file, snort is linked to these files while running, do not take the easy way out by touch and rm, snort will lose sync and not log. */ function snort_post_delete_logs($snort_uuid = 0) { global $config, $g; /* do not start config build if rules is empty */ if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; foreach ($config['installedpackages']['snortglobal']['rule'] as $value) { if ($value['uuid'] != $snort_uuid) continue; $if_real = snort_get_real_interface($value['interface']); $snort_log_dir = "/var/log/snort/snort_{$if_real}{$snort_uuid}"; if ($if_real != '') { $filelist = glob("{$snort_log_dir}/*{$snort_uuid}_{$if_real}.u2.*"); unset($filelist[count($filelist) - 1]); foreach ($filelist as $file) @unlink($file); if ($value['perform_stat'] == 'on') { $fd = fopen("{$snort_log_dir}/{$if_real}.stats", "w"); if ($fd) { ftruncate($fd, 0); fclose($fd); } } } } } function snort_postinstall() { global $config, $g, $snort_rules_file, $emerging_threats_version; global $snort_version, $rebuild_rules, $is_postinstall; $snortdir = SNORTDIR; $snortlibdir = SNORTLIBDIR; $rcdir = RCFILEPREFIX; /* Set flag for post-install in progress */ $is_postinstall = true; /* cleanup default files */ @rename("{$snortdir}/snort.conf-sample", "{$snortdir}/snort.conf"); @rename("{$snortdir}/threshold.conf-sample", "{$snortdir}/threshold.conf"); @rename("{$snortdir}/sid-msg.map-sample", "{$snortdir}/sid-msg.map"); @rename("{$snortdir}/unicode.map-sample", "{$snortdir}/unicode.map"); @rename("{$snortdir}/classification.config-sample", "{$snortdir}/classification.config"); @rename("{$snortdir}/generators-sample", "{$snortdir}/generators"); @rename("{$snortdir}/reference.config-sample", "{$snortdir}/reference.config"); @rename("{$snortdir}/gen-msg.map-sample", "{$snortdir}/gen-msg.map"); /* fix up the preprocessor rules filenames from a PBI package install */ $preproc_rules = array("decoder.rules", "preprocessor.rules", "sensitive-data.rules"); foreach ($preproc_rules as $file) { if (file_exists("{$snortdir}/preproc_rules/{$file}-sample")) @rename("{$snortdir}/preproc_rules/{$file}-sample", "{$snortdir}/preproc_rules/{$file}"); } /* Remove any previously installed scripts since we rebuild them */ @unlink("{$snortdir}/sid"); @unlink("{$rcdir}/snort.sh"); @unlink("{$rcdir}/barnyard2"); /* remove example library files */ $files = glob("{$snortlibdir}/dynamicrules/*_example*"); foreach ($files as $f) @unlink($f); $files = glob("{$snortlibdir}/dynamicpreprocessor/*_example*"); foreach ($files as $f) @unlink($f); /* remake saved settings */ if ($config['installedpackages']['snortglobal']['forcekeepsettings'] == 'on') { log_error(gettext("[Snort] Saved settings detected... rebuilding installation with saved settings...")); update_status(gettext("Saved settings detected...")); update_output_window(gettext("Please wait... rebuilding installation with saved settings...")); log_error(gettext("[Snort] Downloading and updating configured rule types...")); @include_once("/usr/local/pkg/snort/snort_check_for_rule_updates.php"); update_status(gettext("Generating snort.conf configuration file from saved settings...")); $rebuild_rules = "on"; sync_snort_package_config(); $rebuild_rules = "off"; update_output_window(gettext("Finished rebuilding files...")); log_error(gettext("[Snort] Finished rebuilding installation from saved settings...")); /* Only try to start Snort if not in reboot */ if (!$g['booting']) { update_status(gettext("Starting Snort using rebuilt configuration...")); log_error(gettext("[Snort] Starting Snort using rebuilt configuration...")); start_service("snort"); } } /* Done with post-install, so clear flag */ $is_postinstall = false; log_error(gettext("[Snort] Package post-installation tasks completed...")); } function snort_Getdirsize($node) { if(!is_readable($node)) return false; $blah = exec( "/usr/bin/du -kd $node" ); return substr( $blah, 0, strpos($blah, 9) ); } /* func for log dir size limit cron */ function snort_snortloglimit_install_cron($should_install) { global $config, $g; if (!is_array($config['cron']['item'])) $config['cron']['item'] = array(); $x=0; $is_installed = false; foreach($config['cron']['item'] as $item) { if (strstr($item['command'], 'snort_check_cron_misc.inc')) { $is_installed = true; break; } $x++; } switch($should_install) { case true: if(!$is_installed) { $cron_item = array(); $cron_item['minute'] = "*/5"; $cron_item['hour'] = "*"; $cron_item['mday'] = "*"; $cron_item['month'] = "*"; $cron_item['wday'] = "*"; $cron_item['who'] = "root"; $cron_item['command'] = "/usr/bin/nice -n20 /usr/local/bin/php -f /usr/local/pkg/snort/snort_check_cron_misc.inc"; $config['cron']['item'][] = $cron_item; } break; case false: if($is_installed == true) unset($config['cron']['item'][$x]); break; } } /* func for updating cron */ function snort_rm_blocked_install_cron($should_install) { global $config, $g; if (!is_array($config['cron']['item'])) $config['cron']['item'] = array(); $x=0; $is_installed = false; foreach($config['cron']['item'] as $item) { if (strstr($item['command'], "snort2c")) { $is_installed = true; break; } $x++; } $snort_rm_blocked_info_ck = $config['installedpackages']['snortglobal']['rm_blocked']; if ($snort_rm_blocked_info_ck == "1h_b") { $snort_rm_blocked_min = "*/5"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "3600"; } if ($snort_rm_blocked_info_ck == "3h_b") { $snort_rm_blocked_min = "*/15"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "10800"; } if ($snort_rm_blocked_info_ck == "6h_b") { $snort_rm_blocked_min = "*/30"; $snort_rm_blocked_hr = "*"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "21600"; } if ($snort_rm_blocked_info_ck == "12h_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/1"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "43200"; } if ($snort_rm_blocked_info_ck == "1d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/2"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "86400"; } if ($snort_rm_blocked_info_ck == "4d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/8"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "345600"; } if ($snort_rm_blocked_info_ck == "7d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "*/14"; $snort_rm_blocked_mday = "*"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "604800"; } if ($snort_rm_blocked_info_ck == "28d_b") { $snort_rm_blocked_min = "2"; $snort_rm_blocked_hr = "0"; $snort_rm_blocked_mday = "*/2"; $snort_rm_blocked_month = "*"; $snort_rm_blocked_wday = "*"; $snort_rm_blocked_expire = "2419200"; } switch($should_install) { case true: $cron_item = array(); $cron_item['minute'] = "$snort_rm_blocked_min"; $cron_item['hour'] = "$snort_rm_blocked_hr"; $cron_item['mday'] = "$snort_rm_blocked_mday"; $cron_item['month'] = "$snort_rm_blocked_month"; $cron_item['wday'] = "$snort_rm_blocked_wday"; $cron_item['who'] = "root"; $cron_item['command'] = "/usr/bin/nice -n20 /usr/local/sbin/expiretable -t $snort_rm_blocked_expire snort2c"; /* Add cron job if not already installed, else just update the existing one */ if (!$is_installed) $config['cron']['item'][] = $cron_item; elseif ($is_installed) $config['cron']['item'][$x] = $cron_item; break; case false: if ($is_installed == true) unset($config['cron']['item'][$x]); break; } } /* func to install snort update */ function snort_rules_up_install_cron($should_install) { global $config, $g; if(!$config['cron']['item']) $config['cron']['item'] = array(); $x=0; $is_installed = false; foreach($config['cron']['item'] as $item) { if (strstr($item['command'], "snort_check_for_rule_updates.php")) { $is_installed = true; break; } $x++; } $snort_rules_up_info_ck = $config['installedpackages']['snortglobal']['autorulesupdate7']; if ($snort_rules_up_info_ck == "6h_up") { $snort_rules_up_min = "3"; $snort_rules_up_hr = "*/6"; $snort_rules_up_mday = "*"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "12h_up") { $snort_rules_up_min = "3"; $snort_rules_up_hr = "*/12"; $snort_rules_up_mday = "*"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "1d_up") { $snort_rules_up_min = "3"; $snort_rules_up_hr = "0"; $snort_rules_up_mday = "*/1"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "4d_up") { $snort_rules_up_min = "3"; $snort_rules_up_hr = "0"; $snort_rules_up_mday = "*/4"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "7d_up") { $snort_rules_up_min = "3"; $snort_rules_up_hr = "0"; $snort_rules_up_mday = "*/7"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } if ($snort_rules_up_info_ck == "28d_up") { $snort_rules_up_min = "3"; $snort_rules_up_hr = "0"; $snort_rules_up_mday = "*/28"; $snort_rules_up_month = "*"; $snort_rules_up_wday = "*"; } switch($should_install) { case true: $cron_item = array(); $cron_item['minute'] = "$snort_rules_up_min"; $cron_item['hour'] = "$snort_rules_up_hr"; $cron_item['mday'] = "$snort_rules_up_mday"; $cron_item['month'] = "$snort_rules_up_month"; $cron_item['wday'] = "$snort_rules_up_wday"; $cron_item['who'] = "root"; $cron_item['command'] = "/usr/bin/nice -n20 /usr/local/bin/php -f /usr/local/pkg/snort/snort_check_for_rule_updates.php"; /* Add cron job if not already installed, else just update the existing one */ if (!$is_installed) $config['cron']['item'][] = $cron_item; elseif ($is_installed) $config['cron']['item'][$x] = $cron_item; break; case false: if($is_installed == true) unset($config['cron']['item'][$x]); break; } } /* Only run when all ifaces needed to sync. Expects filesystem rw */ function sync_snort_package_config() { global $config, $g, $flowbit_rules_file, $snort_enforcing_rules_file; global $snort_version, $rebuild_rules; $snortdir = SNORTDIR; conf_mount_rw(); /* do not start config build if rules is empty or there are no Snort settings */ if (!is_array($config['installedpackages']['snortglobal']) || !is_array($config['installedpackages']['snortglobal']['rule'])) { exec('/bin/rm /usr/local/etc/rc.d/snort.sh'); conf_mount_ro(); return; } $snortconf = $config['installedpackages']['snortglobal']['rule']; foreach ($snortconf as $value) { $if_real = snort_get_real_interface($value['interface']); /* create a snort.conf file for interface */ snort_generate_conf($value); /* create barnyard2.conf file for interface */ if ($value['barnyard_enable'] == 'on') snort_create_barnyard2_conf($value, $if_real); } /* create snort bootup file snort.sh only create once */ snort_create_rc(); $snortglob = $config['installedpackages']['snortglobal']; snort_snortloglimit_install_cron($snortglob['snortloglimit'] == 'on' ? true : false); /* set the snort block hosts time IMPORTANT */ snort_rm_blocked_install_cron($snortglob['rm_blocked'] != "never_b" ? true : false); /* set the snort rules update time */ snort_rules_up_install_cron($snortglob['autorulesupdate7'] != "never_up" ? true : false); configure_cron(); snort_sync_on_changes(); conf_mount_ro(); } function snort_build_sid_msg_map($rules_path, $sid_file) { /*************************************************************/ /* This function reads all the rules file in the passed */ /* $rules_path variable and produces a properly formatted */ /* sid-msg.map file for use by Snort and/or barnyard2. */ /*************************************************************/ $sidMap = array(); $rule_files = array(); /* First check if we were passed a directory, a single file */ /* or an array of filenames to read. Set our $rule_files */ /* variable accordingly. If we can't figure it out, return */ /* and don't write a sid_msg_map file. */ if (is_string($rules_path)) { if (is_dir($rules_path)) $rule_files = glob($rules_path . "*.rules"); elseif (is_file($rules_path)) $rule_files = (array)$rules_path; } elseif (is_array($rules_path)) $rule_files = $rules_path; else return; /* Read the rule files into an array, then iterate the list */ foreach ($rule_files as $file) { /* Don't process files with "deleted" in the filename */ if (stristr($file, "deleted")) continue; /* Read the file into an array, skipping missing files. */ if (!file_exists($file)) continue; $rules_array = file($file, FILE_SKIP_EMPTY_LINES); $record = ""; $b_Multiline = false; /* Read and process each line from the rules in the */ /* current file. */ foreach ($rules_array as $rule) { /* Skip any non-rule lines unless we're in */ /* multiline mode. */ if (!preg_match('/^\s*#*\s*(alert|drop|pass)/i', $rule) && !$b_Multiline) continue; /* Test for a multi-line rule, and reassemble the */ /* pieces back into a single line. */ if (preg_match('/\\\\s*[\n]$/m', $rule)) { $rule = substr($rule, 0, strrpos($rule, '\\')); $record .= $rule; $b_Multiline = true; continue; } /* If the last segment of a multiline rule, then */ /* append it onto the previous parts to form a */ /* single-line rule for further processing below. */ elseif (!preg_match('/\\\\s*[\n]$/m', $rule) && $b_Multiline) { $record .= $rule; $rule = $record; } $b_Multiline = false; $record = ""; /* Parse the rule to find sid and any references. */ $sid = ''; $msg = ''; $matches = ''; $sidEntry = ''; if (preg_match('/\bmsg\s*:\s*"(.+?)"\s*;/i', $rule, $matches)) $msg = trim($matches[1]); if (preg_match('/\bsid\s*:\s*(\d+)\s*;/i', $rule, $matches)) $sid = trim($matches[1]); if (!empty($sid) && !empty($msg)) { $sidEntry = $sid . ' || ' . $msg; preg_match_all('/\breference\s*:\s*([^\;]+)/i', $rule, $matches); foreach ($matches[1] as $ref) $sidEntry .= " || " . trim($ref); $sidEntry .= "\n"; $sidMap[$sid] = $sidEntry; } } } /* Sort the generated sid-msg map by sid */ ksort($sidMap); /* Now print the result to the supplied file */ @file_put_contents($sid_file, array_values($sidMap)); } function snort_merge_reference_configs($cfg_in, $cfg_out) { /***********************************************************/ /* This function takes a list of "reference.config" files */ /* in the $cfg_in array and merges them into a single */ /* file specified by $cfg_out. The merging is done so */ /* no duplication of lines occurs in the output file. */ /***********************************************************/ $outMap = array(); foreach ($cfg_in as $file) { if (!file_exists($file)) continue; $in = file($file, FILE_SKIP_EMPTY_LINES); foreach ($in as $line) { /* Skip comment lines */ if (preg_match('/^\s*#/', $line)) continue; if (preg_match('/(\:)\s*(\w+)\s*(.*)/', $line, $matches)) { if (!empty($matches[2]) && !empty($matches[3])) { $matches[2] = trim($matches[2]); if (!array_key_exists($matches[2], $outMap)) $outMap[$matches[2]] = trim($matches[3]); } } } } /* Sort the new reference map. */ uksort($outMap,'strnatcasecmp'); /**********************************************************/ /* Do NOT write an empty references.config file, just */ /* exit instead. */ /**********************************************************/ if (empty($outMap)) return false; /* Format and write it to the supplied output file. */ $format = "config reference: %-12s %s\n"; foreach ($outMap as $key=>$value) $outMap[$key] = sprintf($format, $key, $value); @file_put_contents($cfg_out, array_values($outMap)); return true; } function snort_merge_classification_configs($cfg_in, $cfg_out) { /************************************************************/ /* This function takes a list of "classification.config" */ /* files in the $cfg_in array and merges them into a */ /* single file specified by $cfg_out. The merging is done */ /* so no duplication of lines occurs in the output file. */ /************************************************************/ $outMap = array(); foreach ($cfg_in as $file) { if (!file_exists($file)) continue; $in = file($file, FILE_SKIP_EMPTY_LINES); foreach ($in as $line) { if (preg_match('/(.*:)(\s*.*),(.*),(.*)/', $line, $matches)) { /* Skip comment lines */ if (preg_match('/^\s*#/', $line)) continue; if (!empty($matches[2]) && !empty($matches[3]) && !empty($matches[4])) { $matches[2] = trim($matches[2]); if (!array_key_exists($matches[2], $outMap)) $outMap[$matches[2]] = trim($matches[3]) . "," . trim($matches[4]); } } } } /* Sort the new classification map. */ uksort($outMap,'strnatcasecmp'); /**********************************************************/ /* Do NOT write an empty classification.config file, just */ /* exit instead. */ /**********************************************************/ if (empty($outMap)) return false; /* Format and write it to the supplied output file. */ $format = "config classification: %s,%s\n"; foreach ($outMap as $key=>$value) $outMap[$key] = sprintf($format, $key, $value); @file_put_contents($cfg_out, array_values($outMap)); return true; } function snort_load_rules_map($rules_path) { /***************************************************************/ /* This function loads and returns an array with all the rules */ /* found in the *.rules files in the passed rules path. */ /* */ /* $rules_path can be: */ /* a directory (assumed to contain *.rules files) */ /* a filename (identifying a specific *.rules file) */ /* an array of filenames (identifying *.rules files) */ /***************************************************************/ $map_ref = array(); $rule_files = array(); if (empty($rules_path)) return $map_ref; /*************************************************************** * Read all the rules into the map array. * The structure of the map array is: * * map[gid][sid]['rule']['category']['disabled']['flowbits'] * * where: * gid = Generator ID from rule, or 1 if general text * rule * sid = Signature ID from rule * rule = Complete rule text * category = File name of file containing the rule * disabled = 1 if rule is disabled (commented out), 0 if * rule is enabled * flowbits = Array of applicable flowbits if rule contains * flowbits options ***************************************************************/ /* First check if we were passed a directory, a single file */ /* or an array of filenames to read. Set our $rule_files */ /* variable accordingly. If we can't figure it out, return */ /* an empty rules map array. */ if (is_string($rules_path)) { if (is_dir($rules_path)) $rule_files = glob($rules_path . "*.rules"); elseif (is_file($rules_path)) $rule_files = (array)$rules_path; } elseif (is_array($rules_path)) $rule_files = $rules_path; else return $map_ref; /* Read the rule files into an array, then iterate the list */ /* to process the rules from the files one-by-one. */ foreach ($rule_files as $file) { /* Don't process files with "deleted" in the filename. */ if (stristr($file, "deleted")) continue; /* Read the file contents into an array, skipping */ /* missing files. */ if (!file_exists($file)) continue; $rules_array = file($file, FILE_SKIP_EMPTY_LINES); $record = ""; $b_Multiline = false; /* Read and process each line from the rules in the */ /* current file into an array. */ foreach ($rules_array as $rule) { /* Skip any lines that may be just spaces. */ if (trim($rule, " \n") == "") continue; /* Skip any non-rule lines unless we're in */ /* multiline mode. */ if (!preg_match('/^\s*#*\s*(alert|drop|pass)/i', $rule) && !$b_Multiline) continue; /* Test for a multi-line rule; loop and reassemble */ /* the pieces back into a single line. */ if (preg_match('/\\\\s*[\n]$/m', $rule)) { $rule = substr($rule, 0, strrpos($rule, '\\')); $record .= $rule; $b_Multiline = true; continue; } /* If the last segment of a multiline rule, then */ /* append it onto the previous parts to form a */ /* single-line rule for further processing below. */ elseif (!preg_match('/\\\\s*[\n]$/m', $rule) && $b_Multiline) { $record .= $rule; $rule = $record; } /* We have an actual single-line rule, or else a */ /* re-assembled multiline rule that is now a */ /* single-line rule, so store it in our rules map. */ /* Get and test the SID. If we don't find one, */ /* ignore and skip this rule as it is invalid. */ $sid = snort_get_sid($rule); if (empty($sid)) { $b_Multiline = false; $record = ""; continue; } $gid = snort_get_gid($rule); if (!is_array($map_ref[$gid])) $map_ref[$gid] = array(); if (!is_array($map_ref[$gid][$sid])) $map_ref[$gid][$sid] = array(); $map_ref[$gid][$sid]['rule'] = $rule; $map_ref[$gid][$sid]['category'] = basename($file, ".rules"); if (preg_match('/^\s*\#+/', $rule)) $map_ref[$gid][$sid]['disabled'] = 1; else $map_ref[$gid][$sid]['disabled'] = 0; /* Grab any associated flowbits from the rule. */ $map_ref[$gid][$sid]['flowbits'] = snort_get_flowbits($rule); /* Reset our local flag and record variables */ /* for the next rule in the set. */ $b_Multiline = false; $record = ""; } /* Zero out our processing array and get the next file. */ unset($rules_array); } return $map_ref; } function snort_get_gid($rule) { /****************************************************************/ /* If a gid is defined, then return it, else default to "1" for */ /* general text rules match. */ /****************************************************************/ if (preg_match('/\bgid\s*:\s*(\d+)\s*;/i', $rule, $matches)) return trim($matches[1]); else return "1"; } function snort_get_sid($rule) { /***************************************************************/ /* If a sid is defined, then return it, else default to an */ /* empty value. */ /***************************************************************/ if (preg_match('/\bsid\s*:\s*(\d+)\s*;/i', $rule, $matches)) return trim($matches[1]); else return ""; } function snort_get_msg($rule) { /**************************************************************/ /* Return the MSG section of the passed rule as a string. */ /**************************************************************/ $msg = ""; if (preg_match('/\bmsg\s*:\s*"(.+?)"\s*;/i', $rule, $matches)) $msg = trim($matches[1]); return $msg; } function snort_get_flowbits($rule) { /*************************************************************/ /* This will pull out "flowbits:" options from the rule text */ /* and return them in an array (minus the "flowbits:" part). */ /*************************************************************/ $flowbits = array(); /* Grab any "flowbits:set, setx, unset, isset or toggle" options first. */ /* Examine flowbits targets for logical operators to capture all targets */ if (preg_match_all('/flowbits\b\s*:\s*(set|setx|unset|toggle|isset|isnotset)\s*,([^;]+)/i', $rule, $matches)) { $i = -1; while (++$i < count($matches[1])) { $action = trim($matches[1][$i]) . ","; $target = preg_split('/[&|]/', $matches[2][$i]); foreach ($target as $t) $flowbits[] = $action . trim($t); } } /* Include the "flowbits:noalert or reset" options, if present. */ if (preg_match_all('/flowbits\b\s*:\s*(noalert|reset)\b/i', $rule, $matches)) { $i = -1; while (++$i < count($matches[1])) { $flowbits[] = trim($matches[1][$i]); } } return $flowbits; } function snort_get_checked_flowbits(&$rules_map) { /*************************************************************/ /* This function checks all the currently enabled rules to */ /* find any checked flowbits, and returns the checked */ /* flowbit names in an array. */ /*************************************************************/ $checked_flowbits = array(); foreach ($rules_map as $rulem) { if (!is_array($rulem)) continue; foreach ($rulem as $rulem2) { if (!is_array($rulem2)) continue; if ($rulem2['disabled'] == 1) continue; if (empty($rulem2['flowbits'])) continue; if (!is_array($rulem2['flowbits'])) continue; foreach ($rulem2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; /* If no comma in flowbits option, then skip it. */ $pos = strpos($flowbit, ","); if ($pos === false) continue; $action = substr(strtolower($flowbit), 0, $pos); if ($action == "isset" || $action == "isnotset") { $tmp = substr($flowbit, strpos($flowbit, ",") + 1 ); if (!empty($tmp)) $checked_flowbits[$tmp] = $action; } } } } unset($rulem, $rulem2); return $checked_flowbits; } function snort_get_set_flowbits(&$rules_map) { /*********************************************************/ /* This function checks all the currently enabled rules */ /* to find any set flowbits, and returns the flowbit */ /* names in an array. */ /*********************************************************/ $set_flowbits = array(); foreach ($rules_map as $rulem) { if (!is_array($rulem)) continue; foreach ($rulem as $rulem2) { if ($rulem2['disabled'] == 1) continue; if (empty($rulem2['flowbits'])) continue; if (!is_array($rulem2['flowbits'])) continue; foreach ($rulem2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; /* If no comma in flowbits option, then skip it. */ $pos = strpos($flowbit, ","); if ($pos === false) continue; $action = substr(strtolower($flowbit), 0, $pos); if ($action == "set" || $action == "toggle" || $action == "setx") { $tmp = substr($flowbit, strpos($flowbit, ",") + 1 ); if (!empty($tmp)) $set_flowbits[$tmp] = $action; } } } } unset($rulem, $rulem2); return $set_flowbits; } function snort_find_flowbit_required_rules(&$all_rules, &$unchecked_flowbits) { /********************************************************/ /* This function finds all rules that must be enabled */ /* in order to satisfy the "checked flowbits" used by */ /* the currently enabled rules. It returns the list */ /* of required rules in an array. */ /********************************************************/ $required_flowbits_rules = array(); foreach ($all_rules as $k1 => $rule) { if (!is_array($rule)) continue; foreach ($rule as $k2 => $rule2) { if (empty($rule2['flowbits'])) continue; if (!is_array($rule2['flowbits'])) continue; foreach ($rule2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; $action = substr($flowbit, 0, strpos($flowbit, ",")); if (!strcasecmp(substr($action, 0, 3), "set")) { $tmp = substr($flowbit, strpos($flowbit, ",") +1 ); if (!empty($tmp) && isset($unchecked_flowbits[$tmp])) { if (!is_array($required_flowbits_rules[$k1])) $required_flowbits_rules[$k1] = array(); if (!is_array($required_flowbits_rules[$k1][$k2])) $required_flowbits_rules[$k1][$k2] = array(); $required_flowbits_rules[$k1][$k2]['category'] = $rule2['category']; if ($rule2['disabled'] == 0) /* If not disabled, just return the rule text "as is" */ $required_flowbits_rules[$k1][$k2]['rule'] = ltrim($rule2['rule']); else { /* If rule is disabled, remove leading '#' to enable it */ $required_flowbits_rules[$k1][$k2]['rule'] = ltrim(substr($rule2['rule'], strpos($rule2['rule'], "#") + 1)); $required_flowbits_rules[$k1][$k2]['disabled'] = 0; } } } } } } unset($rule, $rule2); return $required_flowbits_rules; } function snort_resolve_flowbits(&$active_rules) { /******************************************************/ /* This function auto-resolves flowbit requirements */ /* by finding all checked flowbits in the currently */ /* enabled rules, and then making sure all the "set" */ /* flowbit rules for those "checked" flowbits are */ /* enabled. For any that are not enabled, they are */ /* copied to an array, enabled, and returned. */ /* */ /* $active_rules --> Rules Map array containing */ /* the current rules for the */ /* interface to resolve flowbit */ /* dependencies for. */ /* */ /* NOTE: this function assumes the global variable */ /* $all_rules is populated with all the rules */ /* currently downloaded. */ /******************************************************/ global $all_rules; $snortdir = SNORTDIR; /* Check $all_rules array to be sure it is filled. */ if (empty($all_rules)) { log_error(gettext("[Snort] WARNING: Flowbit resolution not done - no rules in {$snortdir}/rules/ ...")); return array(); } /* First, find all the "checked" and "set" flowbits. */ $checked_flowbits = snort_get_checked_flowbits($active_rules); $set_flowbits = snort_get_set_flowbits($active_rules); /* Next find any "checked" flowbits without matching */ /* "set" flowbit rules in the enabled rule set. */ $delta_flowbits = array_diff_key($checked_flowbits, $set_flowbits); /* Cleanup and release the memory we no longer need. */ unset($checked_flowbits); unset($set_flowbits); /* Now find all the needed "set flowbit" rules from */ /* the master list of all rules. */ $required_rules = snort_find_flowbit_required_rules($all_rules, $delta_flowbits); /* Cleanup and release memory we no longer need. */ unset($delta_flowbits); return $required_rules; } function snort_write_flowbit_rules_file($flowbit_rules, $rule_file) { /************************************************/ /* This function takes an array of rules in the */ /* rules_map format and writes them to the file */ /* given. */ /************************************************/ global $flowbit_rules_file; /* See if we were passed a directory or full */ /* filename to write the rules to, and adjust */ /* the destination argument accordingly. */ if (is_dir($rule_file)) $rule_file = rtrim($rule_file, '/')."/{$flowbit_rules_file}"; if (empty($flowbit_rules)) { @file_put_contents($rule_file, ""); return; } $fp = fopen($rule_file, "w"); if ($fp) { @fwrite($fp, "# These rules set flowbits checked by your other enabled rules. If the\n"); @fwrite($fp, "# the dependent flowbits are not set, then some of your chosen rules may\n"); @fwrite($fp, "# not fire. Enabling all rules that set these dependent flowbits ensures\n"); @fwrite($fp, "# your chosen rules fire as intended.\n#\n"); @fwrite($fp, "# If you wish to prevent alerts from any of these rules, add the GID:SID\n"); @fwrite($fp, "# of the rule to the Suppression List for the interface.\n"); foreach ($flowbit_rules as $k1 => $rule) { foreach ($rule as $k2 => $rule2) { @fwrite($fp, "\n# Category: {$rule2['category']}"); @fwrite($fp, " GID:{$k1} SID:{$k2}\n"); @fwrite($fp, $rule2['rule']); } } fclose($fp); } } function snort_load_vrt_policy($policy, $load_rules_map=true) { /************************************************/ /* This function returns an array of all rules */ /* marked with the passed in $policy metadata. */ /* */ /* $policy --> desired VRT security policy */ /* 1. connectivity */ /* 2. balanced */ /* 3. security */ /* */ /* $load_rules --> load a local copy of all */ /* the rules if true. If */ /* false, assume the global */ /* $all_rules array is valid. */ /************************************************/ global $all_rules; $snortdir = SNORTDIR; $vrt_policy_rules = array(); /* Create regular expression for searching. */ $policy_pcre = "/policy\\s" . $policy . "/i"; /* Refresh the map of all the rules if flag */ /* is set. */ if ($load_rules_map == true) $all_rules = snort_load_rules_map("{$snortdir}/rules/"); /* Now walk the rules list and find all those */ /* that are defined as active for the chosen */ /* security policy. */ foreach ($all_rules as $k1 => $arulem) { foreach ($arulem as $k2 => $arulem2) { if (preg_match($policy_pcre, $arulem2['rule'])) { if (!preg_match('/flowbits\s*:\s*noalert/i', $arulem2['rule'])) { if (!is_array($vrt_policy_rules[$k1])) $vrt_policy_rules[$k1] = array(); if (!is_array($vrt_policy_rules[$k1][$k2])) $vrt_policy_rules[$k1][$k2] = array(); $vrt_policy_rules[$k1][$k2] = $arulem2; /* Enable the policy rule if disabled */ if ($arulem2['disabled'] == 1) { $vrt_policy_rules[$k1][$k2]['rule'] = ltrim(substr($arulem2['rule'], strpos($arulem2['rule'], "#") + 1)); $vrt_policy_rules[$k1][$k2]['disabled'] = 0; } } } } } /* Release memory we no longer need. */ unset($arulem, $arulem2); /* If we loaded the ALL_RULES map, */ /* then release the memory. */ if ($load_rules_map == true) unset($all_rules); /* Return all the rules that match the policy. */ return $vrt_policy_rules; } function snort_write_enforcing_rules_file($rule_map, $rule_path) { /************************************************/ /* This function takes a rules map array of */ /* the rules chosen for the active rule set */ /* and writes them out to the passed path. */ /************************************************/ global $snort_enforcing_rules_file; $rule_file = "/{$snort_enforcing_rules_file}"; /* See if we were passed a directory or full */ /* filename to write the rules to, and adjust */ /* the destination argument accordingly. */ if (is_dir($rule_path)) $rule_file = rtrim($rule_path, '/').$rule_file; else $rule_file = $rule_path; /* If the $rule_map array is empty, then exit. */ if (empty($rule_map)) { file_put_contents($rule_file, ""); return; } $fp = fopen($rule_file, "w"); if ($fp) { @fwrite($fp, "# These rules are your current set of enforced rules for the protected\n"); @fwrite($fp, "# interface. This list was compiled from the categories selected on the\n"); @fwrite($fp, "# CATEGORIES tab of the Snort configuration for the interface and/or any\n"); @fwrite($fp, "# chosen Snort VRT pre-defined IPS Policy.\n#\n"); @fwrite($fp, "# Any enablesid or disablesid customizations you made have been applied\n"); @fwrite($fp, "# to the rules in this file.\n\n"); foreach ($rule_map as $rulem) { foreach ($rulem as $rulem2) { /* No reason to write disabled rules to enforcing file, so skip them. */ if ($rulem2['disabled'] == 1) continue; @fwrite($fp, $rulem2['rule']); } } fclose($fp); } } function snort_load_sid_mods($sids, $value) { /*****************************************/ /* This function parses the string of */ /* SID values in $sids and returns an */ /* array with the SID as the key and */ /* value. The SID values in $sids are */ /* assumed to be delimited by "||". */ /* */ /* $sids ==> string of SID values from */ /* saved config file. */ /* */ /* $value ==> type of mod (enable or */ /* disable). Not currently */ /* utilized, but maintained */ /* so as not to break legacy */ /* code elsewhere. */ /*****************************************/ $result = array(); if (empty($sids) || empty($value)) return $result; $tmp = explode("||", $sids); foreach ($tmp as $v) { if (preg_match('/\s\d+/', $v, $match)) $result[trim($match[0])] = trim($match[0]); } unset($tmp); return $result; } function snort_modify_sids(&$rule_map, $snortcfg) { /*****************************************/ /* This function modifies the rules in */ /* the passed rules_map array based on */ /* values in the enablesid/disablesid */ /* configuration parameters. */ /* */ /* $rule_map = array of current rules */ /* $snortcfg = config settings */ /*****************************************/ if (!isset($snortcfg['rule_sid_on']) && !isset($snortcfg['rule_sid_off'])) return; /* Load up our enablesid and disablesid */ /* arrays with lists of modified SIDs */ $enablesid = snort_load_sid_mods($snortcfg['rule_sid_on'], "enablesid"); $disablesid = snort_load_sid_mods($snortcfg['rule_sid_off'], "disablesid"); /* Turn on any rules that need to be */ /* forced "on" with enablesid mods. */ if (!empty($enablesid)) { foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (in_array($k2, $enablesid) && $v['disabled'] == 1) { $rule_map[$k1][$k2]['rule'] = ltrim($v['rule'], " \t#"); $rule_map[$k1][$k2]['disabled'] = 0; } } } } /* Turn off any rules that need to be */ /* forced "off" with disablesid mods. */ if (!empty($disablesid)) { foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (in_array($k2, $disablesid) && $v['disabled'] == 0) { $rule_map[$k1][$k2]['rule'] = "# " . $v['rule']; $rule_map[$k1][$k2]['disabled'] = 1; } } } } unset($enablesid, $disablesid); } /* Start of main config files */ /* open snort.sh for writing" */ function snort_create_rc() { global $config, $g; $snortdir = SNORTDIR; $rcdir = RCFILEPREFIX; if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; $snortconf =& $config['installedpackages']['snortglobal']['rule']; /* do not start config build if rules is empty */ if (empty($snortconf)) return; $start_snort_iface_start = array(); $start_snort_iface_stop = array(); foreach ($snortconf as $value) { $snort_uuid = $value['uuid']; $if_real = snort_get_real_interface($value['interface']); $start_barnyard = << {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid` else pid=`/bin/pgrep -F {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid` fi if [ ! -z \$pid ]; then /usr/bin/logger -p daemon.info -i -t SnortStartup "Barnyard2 STOP for {$value['descr']}({$snort_uuid}_{$if_real})..." /bin/pkill $pid -a time=0 timeout=30 while kill -0 \$pid 2>/dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done if [ -f /var/run/barnyard2_{$if_real}{$snort_uuid}.pid ]; then /bin/rm /var/run/barnyard2_{$if_real}{$snort_uuid}.pid fi fi /usr/bin/logger -p daemon.info -i -t SnortStartup "Barnyard2 START for {$value['descr']}({$snort_uuid}_{$if_real})..." /usr/local/bin/barnyard2 -r {$snort_uuid} -f snort_{$snort_uuid}_{$if_real}.u2 --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d /var/log/snort/snort_{$if_real}{$snort_uuid} -D -q EOE; $stop_barnyard2 = <</dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done if [ -f /var/run/barnyard2_{$if_real}{$snort_uuid}.pid ]; then /bin/rm /var/run/barnyard2_{$if_real}{$snort_uuid}.pid fi else pid=`/bin/pgrep -xf '/usr/local/bin/barnyard2 -r {$snort_uuid} -f snort_{$snort_uuid}_{$if_real}.u2 --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d /var/log/snort/snort_{$if_real}{$snort_uuid} -D -q'` if [ ! -z \$pid ]; then /bin/pkill -xf '/usr/local/bin/barnyard2 -r {$snort_uuid} -f snort_{$snort_uuid}_{$if_real}.u2 --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d /var/log/snort/snort_{$if_real}{$snort_uuid} -D -q' time=0 timeout=30 while kill -0 \$pid 2>/dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done fi fi EOE; if ($value['barnyard_enable'] == 'on' && !empty($value['barnyard_mysql'])) $start_barnyard2 = $start_barnyard; else $start_barnyard2 = $stop_barnyard2; $start_snort_iface_start[] = <</dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done if [ -f /var/run/snort_{$if_real}{$snort_uuid}.pid ]; then /bin/rm /var/run/snort_{$if_real}{$snort_uuid}.pid fi else pid=`/bin/pgrep -xf '/usr/local/bin/snort -R {$snort_uuid} -D -q -l /var/log/snort/snort_{$if_real}{$snort_uuid} --pid-path {$g['varrun_path']} --nolock-pidfile -G {$snort_uuid} -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/snort.conf -i {$if_real}'` if [ ! -z \$pid ]; then /usr/bin/logger -p daemon.info -i -t SnortStartup "Snort STOP for {$value['descr']}({$snort_uuid}_{$if_real})..." /bin/pkill -xf '/usr/local/bin/snort -R {$snort_uuid} -D -q -l /var/log/snort/snort_{$if_real}{$snort_uuid} --pid-path {$g['varrun_path']} --nolock-pidfile -G {$snort_uuid} -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/snort.conf -i {$if_real}' time=0 timeout=30 while kill -0 \$pid 2>/dev/null; do sleep 1 time=\$((time+1)) if [ \$time -gt \$timeout ]; then break fi done fi fi sleep 2 {$stop_barnyard2} EOE; } $rc_start = implode("\n", $start_snort_iface_start); $rc_stop = implode("\n", $start_snort_iface_stop); $snort_sh_text = << $rulem) { foreach ($rulem as $k2 => $v) { if (isset($enabled_files[$v['category']])) { if (!is_array($enabled_rules[$k1])) $enabled_rules[$k1] = array(); if (!is_array($enabled_rules[$k1][$k2])) $enabled_rules[$k1][$k2] = array(); $enabled_rules[$k1][$k2]['rule'] = $v['rule']; $enabled_rules[$k1][$k2]['category'] = $v['category']; $enabled_rules[$k1][$k2]['disabled'] = $v['disabled']; $enabled_rules[$k1][$k2]['flowbits'] = $v['flowbits']; } } } /* Release memory we no longer need. */ unset($enabled_files, $rulem, $v); } /* Check if a pre-defined Snort VRT policy is selected. If so, */ /* add all the VRT policy rules to our enforcing rule set. */ if (!empty($snortcfg['ips_policy'])) { $policy_rules = snort_load_vrt_policy($snortcfg['ips_policy'], false); foreach ($policy_rules as $k1 => $policy) { foreach ($policy as $k2 => $p) { if (!is_array($enabled_rules[$k1])) $enabled_rules[$k1] = array(); if (!is_array($enabled_rules[$k1][$k2])) $enabled_rules[$k1][$k2] = array(); $enabled_rules[$k1][$k2]['rule'] = $p['rule']; $enabled_rules[$k1][$k2]['category'] = $p['category']; $enabled_rules[$k1][$k2]['disabled'] = $p['disabled']; $enabled_rules[$k1][$k2]['flowbits'] = $p['flowbits']; } } unset($policy_rules, $policy, $p); } /* Process any enablesid or disablesid modifications for the selected rules. */ snort_modify_sids($enabled_rules, $snortcfg); /* Check for and disable any rules dependent upon disabled preprocessors if */ /* this option is enabled for the interface. */ if ($snortcfg['preproc_auto_rule_disable'] == "on") { log_error('[Snort] Checking for rules dependent on disabled preprocessors for: ' . snort_get_friendly_interface($snortcfg['interface']) . '...'); snort_filter_preproc_rules($snortcfg, $enabled_rules); } /* Write the enforcing rules file to the Snort interface's "rules" directory. */ snort_write_enforcing_rules_file($enabled_rules, "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); /* If auto-flowbit resolution is enabled, generate the dependent flowbits rules file. */ if ($snortcfg['autoflowbitrules'] == 'on') { log_error('[Snort] Enabling any flowbit-required rules for: ' . snort_get_friendly_interface($snortcfg['interface']) . '...'); $fbits = snort_resolve_flowbits($enabled_rules); /* Check for and disable any flowbit-required rules dependent upon */ /* disabled preprocessors if this option is enabled for the interface. */ if ($snortcfg['preproc_auto_rule_disable'] == "on") { log_error('[Snort] Checking flowbit rules dependent on disabled preprocessors for: ' . snort_get_friendly_interface($snortcfg['interface']) . '...'); snort_filter_preproc_rules($snortcfg, $fbits, true); } snort_write_flowbit_rules_file($fbits, "{$snortcfgdir}/rules/{$flowbit_rules_file}"); unset($fbits); } else /* Just put an empty file to always have the file present */ snort_write_flowbit_rules_file(array(), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); unset($enabled_rules, $all_rules); } else { snort_write_enforcing_rules_file(array(), "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); snort_write_flowbit_rules_file(array(), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); } if (!empty($snortcfg['customrules'])) { @file_put_contents("{$snortcfgdir}/rules/custom.rules", base64_decode($snortcfg['customrules'])); $no_rules_defined = false; } else @file_put_contents("{$snortcfgdir}/rules/custom.rules", ""); /* Log a warning if the interface has no rules defined or enabled */ if ($no_rules_defined) log_error(gettext("[Snort] Warning - no text rules selected for: " . snort_get_friendly_interface($snortcfg['interface']) . " ...")); /* Build a new sid-msg.map file from the enabled */ /* rules and copy it to the interface directory. */ log_error(gettext("[Snort] Building new sig-msg.map file for " . snort_get_friendly_interface($snortcfg['interface']) . "...")); snort_build_sid_msg_map("{$snortcfgdir}/rules/", "{$snortcfgdir}/sid-msg.map"); } function snort_filter_preproc_rules($snortcfg, &$active_rules, $persist_log = false) { /**************************************************/ /* This function checks the $active_rules array */ /* for rule options dependent upon preprocessors. */ /* Rules with rule options dependent upon any */ /* non-enabled preprocessors are disabled to stop */ /* start-up errors from unknown rule options. */ /* */ /* $snortcfg -> config parameters array for */ /* the interface */ /* $active_rules -> rules_map array of enabled */ /* rules for the interface */ /* */ /* NOTE: This feature must be enabled in the GUI */ /* by the user. Use of this feature can */ /* severely degrade Snort's ability to */ /* detect threats by disabling potentially */ /* crucial detection rules. */ /**************************************************/ global $config; $snortlogdir = SNORTLOGDIR; $disabled_count = 0; $log_msg = array(); /* Check if no rules or if this option is disabled */ if (empty($active_rules) || $snortcfg['preproc_auto_rule_disable'] <> 'on') return; /*************************************************** * Construct an array of rule options with their * * associated preprocessors. * * * * IMPORTANT -- Keep this part of the code current * * with changes to preprocessor rule options in * * Snort VRT rules. * * * * * * Format of array is: * * "rule_option" => "dependent_preprocessor" * * * * Last Update: 04/05/2013 * * * * Added: http_inspect content modifiers and * * various "service" metadata values. * * * ***************************************************/ $rule_opts_preprocs = array("ssl_version:" => "ssl_preproc","ssl_state:" => "ssl_preproc", "service ssl" => "ssl_preproc", "service ftp" => "ftp_preprocessor", "service telnet" => "ftp_preprocessor", "service dns" => "dns_preprocessor", "dce_iface:" => "dce_rpc_2", "dce_opnum:" => "dce_rpc_2", "dce_stub_data;" => "dce_rpc_2", "sd_pattern:" => "sensitive_data", "sip_method:" => "sip_preproc", "sip_stat_code:" => "sip_preproc", "sip_header;" => "sip_preproc", "sip_body;" => "sip_preproc", "gtp_type:" => "gtp_preproc", "gtp_info:" => "gtp_preproc", "gtp_version:" => "gtp_preproc", "modbus_func:" => "modbus_preproc", "modbus_unit:" => "modbus_preproc", "modbus_data;" => "modbus_preproc", "dnp3_func:" => "dnp3_preproc", "dnp3_obj:" => "dnp3_preproc", "dnp3_ind:" => "dnp3_preproc", "dnp3_data;" => "dnp3_preproc", "http_client_body;" => "http_inspect", "http_cookie;" => "http_inspect", "http_raw_cookie;" => "http_inspect", "http_header;" => "http_inspect", "http_raw_header;" => "http_inspect", "http_method;" => "http_inspect", "http_uri;" => "http_inspect", "http_raw_uri;" => "http_inspect", "http_stat_code;" => "http_inspect", "http_stat_msg;" => "http_inspect", "uricontent:" => "http_inspect", "urilen:" => "http_inspect", "http_encode;" => "http_inspect", "service http" => "http_inspect", "service imap" => "imap_preproc", "service pop2" => "pop_preproc", "service pop3" => "pop_preproc", "service smtp" => "smtp_preprocessor"); /*************************************************** * Iterate the enabled rules, and check for rule * * options that depend on disabled preprocessors. * * Disable any of these preprocessor-dependent * * rules we find. Once we find at least one * * reason to disable the rule, stop further checks * * and go to the next rule. * ***************************************************/ foreach ($active_rules as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { /* If rule is already disabled, skip it. */ if ($v['disabled'] == 1) continue; foreach ($rule_opts_preprocs as $opt => $preproc) { $pcre = "/\s*\b" . preg_quote($opt) . "/i"; if (($snortcfg[$preproc] != 'on') && preg_match($pcre, $v['rule'])) { $active_rules[$k1][$k2]['rule'] = "# " . $v['rule']; $active_rules[$k1][$k2]['disabled'] = 1; $disabled_count++; /* Accumulate auto-disabled rules for logging */ $tmp = $active_rules[$k1][$k2]['category'] . ","; $tmp .= "{$k1}:{$k2},{$preproc},{$opt}"; $log_msg[] = $tmp; break; } } } } /* Release memory we no longer need. */ unset($rulem, $v, $preproc); /***************************************************************/ /* If we are persisting the log from the last pass, then open */ /* the log file in append mode. Otherwise open in overwrite */ /* to clear the log in case we have zero disabled rules. */ /* */ /* Typically "persist log" mode is used on the second pass */ /* when flowbit-required rules are being assessed after the */ /* primary enforcing rules have been evaluated. */ /***************************************************************/ $iface = snort_get_friendly_interface($snortcfg['interface']); $file = "{$snortlogdir}/{$iface}_disabled_preproc_rules.log"; if ($persist_log) $fp = fopen($file, 'a'); else $fp = fopen($file, 'w'); /***************************************************/ /* Log a warning if we auto-disabled any rules */ /* just so the user is aware protection is less */ /* than optimal with the preprocessors disabled. */ /***************************************************/ if ($disabled_count > 0) { log_error(gettext("[Snort] Warning: auto-disabled {$disabled_count} rules due to disabled preprocessor dependencies.")); natcasesort($log_msg); if ($fp) { /* Only write the header when not persisting the log */ if (!$persist_log) { @fwrite($fp, "#\n# Run Time: " . date("Y-m-d H:i:s") . "\n#\n"); @fwrite($fp, "#\n# These rules were auto-disabled because they contain options or operators\n"); @fwrite($fp, "# dependent on preprocessors that are currently NOT ENABLED on the Preprocessors\n"); @fwrite($fp, "# tab. Without these dependent preprocessors enabled, Snort would fail to start\n"); @fwrite($fp, "# if the rules listed below were enabled. Therefore the listed rules have been\n"); @fwrite($fp, "# automatically disabled. This behavior is controlled by the Auto-Rule Disable\n"); @fwrite($fp, "# feature on the Preprocessors tab.\n#\n"); @fwrite($fp, "# WARNING: Using the auto-disable rule feature is not recommended because it can\n"); @fwrite($fp, "# significantly reduce the threat detection capabilities of Snort!\n#"); @fwrite($fp, "\n# In the list below, the PREPROCESSOR column is the disabled preprocessor that\n"); @fwrite($fp, "# triggered the auto-disable of the rule represented by GID:SID. The RULE OPTION\n"); @fwrite($fp, "# column shows the specific rule option or content modifier contained within\n"); @fwrite($fp, "# the rule text that requires the preprocessor be enabled in order to execute.\n#"); @fwrite($fp, "\n# RULE CATEGORY GID:SID PREPROCESSOR RULE OPTION\n"); } foreach ($log_msg as $m) { $tmp = explode(",", $m); @fwrite($fp, sprintf("%-30s %-10s %-20s %s", $tmp[0], $tmp[1], $tmp[2], $tmp[3]) . "\n"); } } log_error(gettext("[Snort] See '{$file}' for list of auto-disabled rules.")); unset($log_msg); } if ($fp) fclose($fp); } function snort_generate_conf($snortcfg) { global $config, $g, $flowbit_rules_file, $snort_enforcing_rules_file, $rebuild_rules; $snortdir = SNORTDIR; $snortlibdir = SNORTLIBDIR; $snortlogdir = SNORTLOGDIR; if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; /* See if we should protect and not modify the preprocessor rules files */ if (!empty($snortcfg['protect_preproc_rules'])) $protect_preproc_rules = $snortcfg['protect_preproc_rules']; else $protect_preproc_rules = "off"; $if_real = snort_get_real_interface($snortcfg['interface']); $snort_uuid = $snortcfg['uuid']; $snortcfgdir = "{$snortdir}/snort_{$snort_uuid}_{$if_real}"; /* custom home nets */ $home_net_list = snort_build_list($snortcfg, $snortcfg['homelistname']); $home_net = implode(",", $home_net_list); $external_net = '!$HOME_NET'; if (!empty($snortcfg['externallistname']) && $snortcfg['externallistname'] != 'default') { $external_net_list = snort_build_list($snortcfg, $snortcfg['externallistname']); $external_net = implode(",", $external_net_list); } /* user added arguments */ $snort_config_pass_thru = str_replace("\r", "", base64_decode($snortcfg['configpassthru'])); /* create a few directories and ensure the sample files are in place */ $snort_dirs = array( $snortdir, $snortcfgdir, "{$snortcfgdir}/rules", "{$snortlogdir}/snort_{$if_real}{$snort_uuid}", "{$snortlogdir}/snort_{$if_real}{$snort_uuid}/barnyard2", "{$snortcfgdir}/preproc_rules", "dynamicrules" => "{$snortlibdir}/dynamicrules", "dynamicengine" => "{$snortlibdir}/dynamicengine", "dynamicpreprocessor" => "{$snortcfgdir}/dynamicpreprocessor" ); foreach ($snort_dirs as $dir) { if (!is_dir($dir)) safe_mkdir($dir); } /********************************************************************/ /* For fail-safe on an initial startup following installation, and */ /* before a rules update has occurred, copy the default config */ /* files to the interface directory. If files already exist in */ /* the interface directory, or they are newer, that means a rule */ /* update has been done and we should leave the customized files */ /* put in place by the rules update process. */ /********************************************************************/ $snort_files = array("gen-msg.map", "classification.config", "reference.config", "sid-msg.map", "unicode.map", "threshold.conf", "preproc_rules/preprocessor.rules", "preproc_rules/decoder.rules", "preproc_rules/sensitive-data.rules" ); foreach ($snort_files as $file) { if (file_exists("{$snortdir}/{$file}")) { $ftime = filemtime("{$snortdir}/{$file}"); if (!file_exists("{$snortcfgdir}/{$file}") || ($ftime > filemtime("{$snortcfgdir}/{$file}"))) @copy("{$snortdir}/{$file}", "{$snortcfgdir}/{$file}"); } } /* define alertsystemlog */ $alertsystemlog_type = ""; if ($snortcfg['alertsystemlog'] == "on") $alertsystemlog_type = "output alert_syslog: log_alert"; /* define snortunifiedlog */ $snortunifiedlog_type = ""; if ($snortcfg['snortunifiedlog'] == "on") $snortunifiedlog_type = "output unified2: filename snort_{$snort_uuid}_{$if_real}.u2, limit 128"; /* define spoink */ $spoink_type = ""; if ($snortcfg['blockoffenders7'] == "on") { $pfkill = ""; if ($snortcfg['blockoffenderskill'] == "on") $pfkill = "kill"; $spoink_wlist = snort_build_list($snortcfg, $snortcfg['whitelistname']); /* write whitelist */ @file_put_contents("{$snortcfgdir}/{$snortcfg['whitelistname']}", implode("\n", $spoink_wlist)); $spoink_type = "output alert_pf: {$snortcfgdir}/{$snortcfg['whitelistname']},snort2c,{$snortcfg['blockoffendersip']},{$pfkill}"; } /* define selected suppress file */ $suppress_file_name = ""; $suppress = snort_find_list($snortcfg['suppresslistname'], 'suppress'); if (!empty($suppress)) { $suppress_data = str_replace("\r", "", base64_decode($suppress['suppresspassthru'])); @file_put_contents("{$snortcfgdir}/supp{$snortcfg['suppresslistname']}", $suppress_data); $suppress_file_name = "include {$snortcfgdir}/supp{$snortcfg['suppresslistname']}"; } /* set the snort performance model */ $snort_performance = "ac-bnfa"; if(!empty($snortcfg['performance'])) $snort_performance = $snortcfg['performance']; /* if user has defined a custom ssh port, use it */ if(is_array($config['system']['ssh']) && isset($config['system']['ssh']['port'])) $ssh_port = $config['system']['ssh']['port']; else $ssh_port = "22"; $snort_ports = array( "dns_ports" => "53", "smtp_ports" => "25", "mail_ports" => "25,143,465,691", "http_ports" => "80,901,3128,8080,9000", "oracle_ports" => "1521", "mssql_ports" => "1433", "telnet_ports" => "23","snmp_ports" => "161", "ftp_ports" => "21", "ssh_ports" => $ssh_port, "pop2_ports" => "109", "pop3_ports" => "110", "imap_ports" => "143", "sip_proxy_ports" => "5060:5090,16384:32768", "sip_ports" => "5060,5061", "auth_ports" => "113", "finger_ports" => "79", "irc_ports" => "6665,6666,6667,6668,6669,7000", "smb_ports" => "139,445", "nntp_ports" => "119", "rlogin_ports" => "513", "rsh_ports" => "514", "ssl_ports" => "443,465,563,636,989,990,992,993,994,995", "file_data_ports" => "\$HTTP_PORTS,110,143", "shellcode_ports" => "!80", "sun_rpc_ports" => "111,32770,32771,32772,32773,32774,32775,32776,32777,32778,32779", "DCERPC_NCACN_IP_TCP" => "139,445", "DCERPC_NCADG_IP_UDP" => "138,1024:", "DCERPC_NCACN_IP_LONG" => "135,139,445,593,1024:", "DCERPC_NCACN_UDP_LONG" => "135,1024:", "DCERPC_NCACN_UDP_SHORT" => "135,593,1024:", "DCERPC_NCACN_TCP" => "2103,2105,2107", "DCERPC_BRIGHTSTORE" => "6503,6504", "DNP3_PORTS" => "20000", "MODBUS_PORTS" => "502", "GTP_PORTS" => "2123,2152,3386" ); $portvardef = ""; foreach ($snort_ports as $alias => $avalue) { if (!empty($snortcfg["def_{$alias}"]) && is_alias($snortcfg["def_{$alias}"])) $snort_ports[$alias] = filter_expand_alias($snortcfg["def_{$alias}"]); $snort_ports[$alias] = preg_replace('/\s+/', ',', trim($snort_ports[$alias])); $portvardef .= "portvar " . strtoupper($alias) . " [" . $snort_ports[$alias] . "]\n"; } ///////////////////////////// /* preprocessor code */ /* def perform_stat */ $perform_stat = << \ cmd_validity STRU < char FRP > \ cmd_validity ALLO < int [ char R int ] > \ cmd_validity TYPE < { char AE [ char NTC ] | char I | char L [ number ] } > \ cmd_validity MDTM < [ date nnnnnnnnnnnnnn[.n[n[n]]] ] string > \ cmd_validity PORT < host_port > preprocessor ftp_telnet_protocol: ftp client default \ max_resp_len 256 \ bounce yes \ telnet_cmds yes EOD; $pop_ports = str_replace(",", " ", $snort_ports['pop3_ports']); $pop_preproc = << "\$HOME_NET", "smtp_servers" => "\$HOME_NET", "http_servers" => "\$HOME_NET", "www_servers" => "\$HOME_NET", "sql_servers" => "\$HOME_NET", "telnet_servers" => "\$HOME_NET", "snmp_servers" => "\$HOME_NET", "ftp_servers" => "\$HOME_NET", "ssh_servers" => "\$HOME_NET", "pop_servers" => "\$HOME_NET", "imap_servers" => "\$HOME_NET", "sip_proxy_ip" => "\$HOME_NET", "sip_servers" => "\$HOME_NET", "rpc_servers" => "\$HOME_NET", "dnp3_server" => "\$HOME_NET", "dnp3_client" => "\$HOME_NET", "modbus_server" => "\$HOME_NET", "modbus_client" => "\$HOME_NET", "enip_server" => "\$HOME_NET", "enip_client" => "\$HOME_NET", "aim_servers" => "64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24" ); $vardef = ""; foreach ($snort_servers as $alias => $avalue) { if (!empty($snortcfg["def_{$alias}"]) && is_alias($snortcfg["def_{$alias}"])) { $avalue = filter_expand_alias($snortcfg["def_{$alias}"]); $avalue = str_replace(" ", ",", trim($avalue)); } $vardef .= "var " . strtoupper($alias) . " [{$avalue}]\n"; } $snort_preproc_libs = array( "dce_rpc_2" => "dce2_preproc", "dns_preprocessor" => "dns_preproc", "ftp_preprocessor" => "ftptelnet_preproc", "imap_preproc" => "imap_preproc", "pop_preproc" => "pop_preproc", "reputation_preproc" => "reputation_preproc", "sensitive_data" => "sdf_preproc", "sip_preproc" => "sip_preproc", "gtp_preproc" => "gtp_preproc", "smtp_preprocessor" => "smtp_preproc", "ssh_preproc" => "ssh_preproc", "ssl_preproc" => "ssl_preproc", "dnp3_preproc" => "dnp3_preproc", "modbus_preproc" => "modbus_preproc" ); $snort_preproc = array ( "perform_stat", "http_inspect", "other_preprocs", "ftp_preprocessor", "smtp_preprocessor", "ssl_preproc", "sip_preproc", "gtp_preproc", "sf_portscan", "dce_rpc_2", "dns_preprocessor", "sensitive_data", "pop_preproc", "imap_preproc", "dnp3_preproc", "modbus_preproc" ); $default_disabled_preprocs = array( "sf_portscan", "gtp_preproc", "sensitive_data", "dnp3_preproc", "modbus_preproc" ); $snort_preprocessors = ""; foreach ($snort_preproc as $preproc) { if ($snortcfg[$preproc] == 'on' || empty($snortcfg[$preproc]) ) { /* If preprocessor is not explicitly "on" or "off", then default to "off" if in our default disabled list */ if (empty($snortcfg[$preproc]) && in_array($preproc, $default_disabled_preprocs)) continue; /* NOTE: The $$ is not a bug. It is an advanced feature of php */ if (!empty($snort_preproc_libs[$preproc])) { $preproclib = "libsf_" . $snort_preproc_libs[$preproc]; if (!file_exists($snort_dirs['dynamicpreprocessor'] . "{$preproclib}.so")) { if (file_exists("{$snortlibdir}/dynamicpreprocessor/{$preproclib}.so")) { @copy("{$snortlibdir}/dynamicpreprocessor/{$preproclib}.so", "{$snort_dirs['dynamicpreprocessor']}/{$preproclib}.so"); $snort_preprocessors .= $$preproc; $snort_preprocessors .= "\n"; } else log_error("Could not find the {$preproclib} file. Snort might error out!"); } else { $snort_preprocessors .= $$preproc; $snort_preprocessors .= "\n"; } } else { $snort_preprocessors .= $$preproc; $snort_preprocessors .= "\n"; } } } $snort_misc_include_rules = ""; if (file_exists("{$snortcfgdir}/reference.config")) $snort_misc_include_rules .= "include {$snortcfgdir}/reference.config\n"; if (file_exists("{$snortcfgdir}/classification.config")) $snort_misc_include_rules .= "include {$snortcfgdir}/classification.config\n"; if (is_dir("{$snortcfgdir}/preproc_rules")) { if ($snortcfg['sensitive_data'] == 'on' && $protect_preproc_rules == "off") { $sedcmd = '/^#alert.*classtype:sdf/s/^#//'; if (file_exists("{$snortcfgdir}/preproc_rules/sensitive-data.rules")) $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/sensitive-data.rules\n"; } else $sedcmd = '/^alert.*classtype:sdf/s/^/#/'; if (file_exists("{$snortcfgdir}/preproc_rules/decoder.rules") && file_exists("{$snortcfgdir}/preproc_rules/preprocessor.rules") && $protect_preproc_rules == "off") { @file_put_contents("{$g['tmp_path']}/sedcmd", $sedcmd); mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/preprocessor.rules"); mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/decoder.rules"); @unlink("{$g['tmp_path']}/sedcmd"); $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/decoder.rules\n"; $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/preprocessor.rules\n"; } else if (file_exists("{$snortcfgdir}/preproc_rules/decoder.rules") && file_exists("{$snortcfgdir}/preproc_rules/preprocessor.rules") && $protect_preproc_rules == "on") { $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/decoder.rules\n"; $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/preprocessor.rules\n"; } else { $snort_misc_include_rules .= "config autogenerate_preprocessor_decoder_rules\n"; log_error("[Snort] Seems preprocessor/decoder rules are missing, enabling autogeneration of them"); } } else { $snort_misc_include_rules .= "config autogenerate_preprocessor_decoder_rules\n"; log_error("[Snort] Seems preprocessor/decoder rules are missing, enabling autogeneration of them"); } /* generate rule sections to load */ /* The files are always configured so the update process is easier */ $selected_rules_sections = "include \$RULE_PATH/{$snort_enforcing_rules_file}\n"; $selected_rules_sections .= "include \$RULE_PATH/{$flowbit_rules_file}\n"; $selected_rules_sections .= "include \$RULE_PATH/custom.rules\n"; /* Create the actual rules files and save in the interface directory */ snort_prepare_rule_files($snortcfg, $snortcfgdir); $cksumcheck = "all"; if ($snortcfg['cksumcheck'] == 'on') $cksumcheck = "none"; /* Pull in user-configurable options for Frag3 preprocessor settings */ $frag3_disabled = ""; if ($snortcfg['frag3_detection'] == "off") $frag3_disabled = ", disabled"; $frag3_memcap = "memcap 4194304"; if (!empty($snortcfg['frag3_memcap']) || $snortcfg['frag3_memcap'] == "0") $frag3_memcap = "memcap {$snortcfg['frag3_memcap']}"; $frag3_max_frags = "max_frags 8192"; if (!empty($snortcfg['frag3_max_frags'])) $frag3_max_frags = "max_frags {$snortcfg['frag3_max_frags']}"; $frag3_overlap_limit = "overlap_limit 0"; if (!empty($snortcfg['frag3_overlap_limit'])) $frag3_overlap_limit = "overlap_limit {$snortcfg['frag3_overlap_limit']}"; $frag3_min_frag_len = "min_fragment_length 0"; if (!empty($snortcfg['frag3_min_frag_len'])) $frag3_min_frag_len = "min_fragment_length {$snortcfg['frag3_min_frag_len']}"; $frag3_timeout = "timeout 60"; if (!empty($snortcfg['frag3_timeout'])) $frag3_timeout = "timeout {$snortcfg['frag3_timeout']}"; $frag3_policy = "policy bsd"; if (!empty($snortcfg['frag3_policy'])) $frag3_policy = "policy {$snortcfg['frag3_policy']}"; /* Pull in user-configurable options for Stream5 preprocessor settings */ $stream5_reassembly = ""; if ($snortcfg['stream5_reassembly'] == "off") $stream5_reassembly = "disabled,"; $stream5_track_tcp = "yes"; if ($snortcfg['stream5_track_tcp'] =="off") $stream5_track_tcp = "no"; $stream5_track_udp = "yes"; if ($snortcfg['stream5_track_udp'] =="off") $stream5_track_udp = "no"; $stream5_track_icmp = "no"; if ($snortcfg['stream5_track_icmp'] =="on") $stream5_track_icmp = "yes"; $stream5_require_3whs = ""; if ($snortcfg['stream5_require_3whs'] == "on") $stream5_require_3whs = ", require_3whs 0"; $stream5_no_reassemble_async = ""; if ($snortcfg['stream5_no_reassemble_async'] == "on") $stream5_no_reassemble_async = ", dont_reassemble_async"; $stream5_dont_store_lg_pkts = ""; if ($snortcfg['stream5_dont_store_lg_pkts'] == "on") $stream5_dont_store_lg_pkts = ", dont_store_large_packets"; $stream5_max_queued_bytes_type = ""; if ((!empty($snortcfg['max_queued_bytes'])) || ($snortcfg['max_queued_bytes'] == '0')) $stream5_max_queued_bytes_type = ", max_queued_bytes {$snortcfg['max_queued_bytes']}"; $stream5_max_queued_segs_type = ""; if ((!empty($snortcfg['max_queued_segs'])) || ($snortcfg['max_queued_segs'] == '0')) $stream5_max_queued_segs_type = ", max_queued_segs {$snortcfg['max_queued_segs']}"; $stream5_mem_cap = ""; if (!empty($snortcfg['stream5_mem_cap'])) $stream5_mem_cap = ", memcap {$snortcfg['stream5_mem_cap']}"; $stream5_overlap_limit = "overlap_limit 0"; if (!empty($snortcfg['stream5_overlap_limit'])) $stream5_overlap_limit = "overlap_limit {$snortcfg['stream5_overlap_limit']}"; $stream5_policy = "policy bsd"; if (!empty($snortcfg['stream5_policy'])) $stream5_policy = "policy {$snortcfg['stream5_policy']}"; $stream5_tcp_timeout = "timeout 30"; if (!empty($snortcfg['stream5_tcp_timeout'])) $stream5_tcp_timeout = "timeout {$snortcfg['stream5_tcp_timeout']}"; $stream5_udp_timeout = "timeout 30"; if (!empty($snortcfg['stream5_udp_timeout'])) $stream5_udp_timeout = "timeout {$snortcfg['stream5_udp_timeout']}"; $stream5_icmp_timeout = "timeout 30"; if (!empty($snortcfg['stream5_icmp_timeout'])) $stream5_icmp_timeout = "timeout {$snortcfg['stream5_icmp_timeout']}"; /* build snort configuration file */ $snort_conf_text = <<setCredentials($username, $password); if($g['debug']) $cli->setDebug(1); /* send our XMLRPC message and timeout after defined sync timeout value*/ $resp = $cli->send($msg, $synctimeout); if(!$resp) { $error = "A communications error occurred while attempting snort XMLRPC sync with {$url}:{$port}."; log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } elseif($resp->faultCode()) { $cli->setDebug(1); $resp = $cli->send($msg, $synctimeout); $error = "An error code was received while attempting snort XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } else { log_error("snort XMLRPC sync successfully completed with {$url}:{$port}."); } /* tell squid to reload our settings on the destination sync host. */ $method = 'pfsense.exec_php'; $execcmd = "require_once('/usr/local/pkg/snort/snort.inc');\n"; $execcmd .= "sync_snort_package_config();"; /* assemble xmlrpc payload */ $params = array( XML_RPC_encode($password), XML_RPC_encode($execcmd) ); log_error("snort XMLRPC reload data {$url}:{$port}."); $msg = new XML_RPC_Message($method, $params); $cli = new XML_RPC_Client('/xmlrpc.php', $url, $port); $cli->setCredentials($username, $password); $resp = $cli->send($msg, $synctimeout); if(!$resp) { $error = "A communications error occurred while attempting snort XMLRPC sync with {$url}:{$port} (pfsense.exec_php)."; log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } elseif($resp->faultCode()) { $cli->setDebug(1); $resp = $cli->send($msg, $synctimeout); $error = "An error code was received while attempting snort XMLRPC sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString(); log_error($error); file_notice("sync_settings", $error, "snort Settings Sync", ""); } else { log_error("snort XMLRPC reload data success with {$url}:{$port} (pfsense.exec_php)."); } } ?>