> /tmp/snort_update.log"; $config['cron']['item'][] = $cron_item; } break; case false: if($is_installed == true) unset($config['cron']['item'][$x]); break; } } /* Only run when all ifaces needed to sync. Expects filesystem rw */ function sync_snort_package_config() { global $config, $g; conf_mount_rw(); /* do not start config build if rules is empty */ if (!is_array($config['installedpackages']['snortglobal']['rule'])) { exec('/bin/rm /usr/local/etc/rc.d/snort.sh'); conf_mount_ro(); return; } $snortconf = $config['installedpackages']['snortglobal']['rule']; foreach ($snortconf as $value) { $if_real = snort_get_real_interface($value['interface']); /* create snort configuration file */ snort_generate_conf($value); /* create barnyard2 configuration file */ if ($value['barnyard_enable'] == 'on') snort_create_barnyard2_conf($value, $if_real); } /* create snort bootup file snort.sh only create once */ snort_create_rc(); $snortglob = $config['installedpackages']['snortglobal']; snort_snortloglimit_install_cron($snortglob['snortloglimit'] == 'on' ? true : false); /* set the snort block hosts time IMPORTANT */ snort_rm_blocked_install_cron($snortglob['rm_blocked'] != "never_b" ? true : false); /* set the snort rules update time */ snort_rules_up_install_cron($snortglob['autorulesupdate7'] != "never_up" ? true : false); configure_cron(); conf_mount_ro(); } function snort_build_sid_msg_map($rules_path, $sid_file) { /*************************************************************/ /* This function reads all the rules file in the passed */ /* $rules_path variable and produces a properly formatted */ /* sid-msg.map file for use by Snort and/or barnyard2. */ /*************************************************************/ $sidMap = array(); $rule_files = array(); /* First check if we were passed a directory, a single file */ /* or an array of filenames to read. Set our $rule_files */ /* variable accordingly. If we can't figure it out, return */ /* an empty rules map array. */ if (is_string($rules_path)) { if (is_dir($rules_path)) $rule_files = glob($rules_path . "*.rules"); elseif (is_file($rules_path)) $rule_files = (array)$rules_path; } elseif (is_array($rules_path)) $rule_files = $rules_path; else return; /* Read the rule files into an array, then iterate the list */ foreach ($rule_files as $file) { /* Don't process files with "deleted" in the filename */ if (stristr($file, "deleted")) continue; /* Read the file into an array, skipping empty lines. */ $rules_array = file($file, FILE_SKIP_EMPTY_LINES); $record = ""; $b_Multiline = false; /* Read and process each line from the rules in the */ /* current file. */ foreach ($rules_array as $rule) { /* Skip any non-rule lines unless we're in */ /* multiline mode. */ if (!preg_match('/^\s*#*\s*(alert|drop|pass)/i', $rule) && !$b_Multiline) continue; /* Test for a multi-line rule, and reassemble the */ /* pieces back into a single line. */ if (preg_match('/\\\\s*[\n]$/m', $rule)) { $rule = substr($rule, 0, strrpos($rule, '\\')); $record .= $rule; $b_Multiline = true; continue; } /* If the last segment of a multiline rule, then */ /* append it onto the previous parts to form a */ /* single-line rule for further processing below. */ elseif (!preg_match('/\\\\s*[\n]$/m', $rule) && $b_Multiline) { $record .= $rule; $rule = $record; } $b_Multiline = false; $record = ""; /* Parse the rule to find sid and any references. */ $sid = ''; $msg = ''; $matches = ''; $sidEntry = ''; if (preg_match('/\bmsg\s*:\s*"(.+?)"\s*;/i', $rule, $matches)) $msg = trim($matches[1]); if (preg_match('/\bsid\s*:\s*(\d+)\s*;/i', $rule, $matches)) $sid = trim($matches[1]); if (!empty($sid) && !empty($msg)) { $sidEntry = $sid . ' || ' . $msg; preg_match_all('/\breference\s*:\s*([^\;]+)/i', $rule, $matches); foreach ($matches[1] as $ref) $sidEntry .= " || " . trim($ref); $sidEntry .= "\n"; $sidMap[$sid] = $sidEntry; } } } /* Sort the generated sid-msg map by sid */ ksort($sidMap); /* Now print the result to the supplied file */ @file_put_contents($sid_file, array_values($sidMap)); } function snort_merge_reference_configs($cfg_in, $cfg_out) { /***********************************************************/ /* This function takes a list of "reference.config" files */ /* in the $cfg_in array and merges them into a single */ /* file specified by $cfg_out. The merging is done so */ /* no duplication of lines occurs in the output file. */ /***********************************************************/ $outMap = array(); foreach ($cfg_in as $file) { $in = file($file, FILE_SKIP_EMPTY_LINES); foreach ($in as $line) { /* Skip comment lines */ if (preg_match('/^\s*#/', $line)) continue; if (preg_match('/(\:)\s*(\w+)\s*(.*)/', $line, $matches)) { if (!empty($matches[2]) && !empty($matches[3])) { $matches[2] = trim($matches[2]); if (!array_key_exists($matches[2], $outMap)) $outMap[$matches[2]] = trim($matches[3]); } } } } /* Sort the new reference map. */ uksort($outMap,'strnatcasecmp'); /* Format and write it to the supplied output file. */ $format = "config reference: %-12s %s\n"; foreach ($outMap as $key=>$value) $outMap[$key] = sprintf($format, $key, $value); @file_put_contents($cfg_out, array_values($outMap)); } function snort_merge_classification_configs($cfg_in, $cfg_out) { /************************************************************/ /* This function takes a list of "classification.config" */ /* files in the $cfg_in array and merges them into a */ /* single file specified by $cfg_out. The merging is done */ /* so no duplication of lines occurs in the output file. */ /************************************************************/ $outMap = array(); foreach ($cfg_in as $file) { $in = file($file, FILE_SKIP_EMPTY_LINES); foreach ($in as $line) { if (preg_match('/(.*:)(\s*.*),(.*),(.*)/', $line, $matches)) { /* Skip comment lines */ if (preg_match('/^\s*#/', $line)) continue; if (!empty($matches[2]) && !empty($matches[3]) && !empty($matches[4])) { $matches[2] = trim($matches[2]); if (!array_key_exists($matches[2], $outMap)) $outMap[$matches[2]] = trim($matches[3]) . "," . trim($matches[4]); } } } } /* Sort the new classification map. */ uksort($outMap,'strnatcasecmp'); /* Format and write it to the supplied output file. */ $format = "config classification: %s,%s\n"; foreach ($outMap as $key=>$value) $outMap[$key] = sprintf($format, $key, $value); @file_put_contents($cfg_out, array_values($outMap)); } function snort_load_rules_map($rules_path) { /***************************************************************/ /* This function loads and returns an array with all the rules */ /* found in the *.rules files in the passed rules path. */ /* */ /* $rules_path can be: */ /* a directory (assumed to contain *.rules files) */ /* a filename (identifying a specific *.rules file) */ /* an array of filenames (identifying *.rules files) */ /***************************************************************/ $map_ref = array(); $rule_files = array(); if (empty($rules_path)) return $map_ref; /*************************************************************** * Read all the rules into the map array. * The structure of the map array is: * * map[gid][sid]['rule']['category']['disabled']['flowbits'] * * where: * gid = Generator ID from rule, or 1 if general text * rule * sid = Signature ID from rule * rule = Complete rule text * category = File name of file containing the rule * disabled = 1 if rule is disabled (commented out), 0 if * rule is enabled * flowbits = Array of applicable flowbits if rule contains * flowbits options ***************************************************************/ /* First check if we were passed a directory, a single file */ /* or an array of filenames to read. Set our $rule_files */ /* variable accordingly. If we can't figure it out, return */ /* an empty rules map array. */ if (is_string($rules_path)) { if (is_dir($rules_path)) $rule_files = glob($rules_path . "*.rules"); elseif (is_file($rules_path)) $rule_files = (array)$rules_path; } elseif (is_array($rules_path)) $rule_files = $rules_path; else return $map_ref; /* Read the rule files into an array, then iterate the list */ /* to process the rules from the files one-by-one. */ foreach ($rule_files as $file) { /* Don't process files with "deleted" in the filename. */ if (stristr($file, "deleted")) continue; /* Read the file contents into an array, skipping */ /* empty lines. */ $rules_array = file($file, FILE_SKIP_EMPTY_LINES); $record = ""; $b_Multiline = false; /* Read and process each line from the rules in the */ /* current file into an array. */ foreach ($rules_array as $rule) { /* Skip any lines that may be just spaces. */ if (trim($rule, " \n") == "") continue; /* Skip any non-rule lines unless we're in */ /* multiline mode. */ if (!preg_match('/^\s*#*\s*(alert|drop|pass)/i', $rule) && !$b_Multiline) continue; /* Test for a multi-line rule; loop and reassemble */ /* the pieces back into a single line. */ if (preg_match('/\\\\s*[\n]$/m', $rule)) { $rule = substr($rule, 0, strrpos($rule, '\\')); $record .= $rule; $b_Multiline = true; continue; } /* If the last segment of a multiline rule, then */ /* append it onto the previous parts to form a */ /* single-line rule for further processing below. */ elseif (!preg_match('/\\\\s*[\n]$/m', $rule) && $b_Multiline) { $record .= $rule; $rule = $record; } /* We have an actual single-line rule, or else a */ /* re-assembled multiline rule that is now a */ /* single-line rule, so store it in our rules map. */ /* Get and test the SID. If we don't find one, */ /* ignore and skip this rule as it is invalid. */ $sid = snort_get_sid($rule); if (empty($sid)) { $b_Multiline = false; $record = ""; continue; } $gid = snort_get_gid($rule); $map_ref[$gid][$sid]['rule'] = $rule; $map_ref[$gid][$sid]['category'] = basename($file, ".rules"); if (preg_match('/^\s*\#+/', $rule)) $map_ref[$gid][$sid]['disabled'] = 1; else $map_ref[$gid][$sid]['disabled'] = 0; /* Grab any associated flowbits from the rule. */ $map_ref[$gid][$sid]['flowbits'] = snort_get_flowbits($rule); /* Reset our local flag and record variables */ /* for the next rule in the set. */ $b_Multiline = false; $record = ""; } /* Zero out our processing array and get the next file. */ unset($rules_array); } return $map_ref; } function snort_get_gid($rule) { /****************************************************************/ /* If a gid is defined, then return it, else default to "1" for */ /* general text rules match. */ /****************************************************************/ if (preg_match('/\bgid\s*:\s*(\d+)\s*;/i', $rule, $matches)) return trim($matches[1]); else return "1"; } function snort_get_sid($rule) { /***************************************************************/ /* If a sid is defined, then return it, else default to an */ /* empty value. */ /***************************************************************/ if (preg_match('/\bsid\s*:\s*(\d+)\s*;/i', $rule, $matches)) return trim($matches[1]); else return ""; } function snort_get_msg($rule) { /**************************************************************/ /* Return the MSG section of the passed rule as a string. */ /**************************************************************/ $msg = ""; if (preg_match('/\bmsg\s*:\s*"(.+?)"\s*;/i', $rule, $matches)) $msg = trim($matches[1]); return $msg; } function snort_get_flowbits($rule) { /*************************************************************/ /* This will pull out "flowbits:" options from the rule text */ /* and return them in an array. */ /*************************************************************/ $flowbits = array(); if (preg_match_all('/flowbits\b:\s*(set|setx|unset|toggle|isset|isnotset)\s*,([^;]+)/i', $rule, $matches)) { $i = -1; while (++$i < count($matches[1])) { $flowbits[] = trim($matches[1][$i]) ."," . trim($matches[2][$i]); } } return $flowbits; } function snort_get_checked_flowbits(&$rules_map) { /*************************************************************/ /* This function checks all the currently enabled rules to */ /* find any checked flowbits, and returns the checked */ /* flowbit names in an array. */ /*************************************************************/ $checked_flowbits = array(); foreach ($rules_map as $rulem) { if (!is_array($rulem)) continue; foreach ($rulem as $rulem2) { if (!is_array($rulem2)) continue; if ($rulem2['disabled'] == 1) continue; if (empty($rulem2['flowbits'])) continue; if (!is_array($rulem2['flowbits'])) continue; foreach ($rulem2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; $action = substr($flowbit, 0, strpos($flowbit, ",")); if (preg_match('/is(not)?set/i', $action)) { $tmp = substr($flowbit, strpos($flowbit, ",") +1 ); if (!empty($tmp) && !in_array($tmp, $checked_flowbits)) $checked_flowbits[] = $tmp; } } } } unset($rulem, $rulem2); return $checked_flowbits; } function snort_get_set_flowbits(&$rules_map) { /*********************************************************/ /* This function checks all the currently enabled rules */ /* to find any set flowbits, and returns the flowbit */ /* names in an array. */ /*********************************************************/ $set_flowbits = array(); foreach ($rules_map as $rulem) { if (!is_array($rulem)) continue; foreach ($rulem as $rulem2) { if ($rulem2['disabled'] == 1) continue; if (empty($rulem2['flowbits'])) continue; if (!is_array($rulem2['flowbits'])) continue; foreach ($rulem2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; $action = substr($flowbit, 0, strpos($flowbit, ",")); if (preg_match('/^set/i', $action)) { $tmp = substr($flowbit, strpos($flowbit, ",") +1 ); if (!empty($tmp) && !in_array($tmp, $set_flowbits)) $set_flowbits[] = $tmp; } } } } unset($rulem, $rulem2); return $set_flowbits; } function snort_find_flowbit_required_rules(&$all_rules, &$unchecked_flowbits) { /********************************************************/ /* This function finds all rules that must be enabled */ /* in order to satisfy the "checked flowbits" used by */ /* the currently enabled rules. It returns the list */ /* of required rules in an array. */ /********************************************************/ $required_flowbits_rules = array(); foreach ($all_rules as $k1 => $rule) { if (!is_array($rule)) continue; foreach ($rule as $k2 => $rule2) { if (empty($rule2['flowbits'])) continue; if (!is_array($rule2['flowbits'])) continue; foreach ($rule2['flowbits'] as $flowbit) { if (empty($flowbit)) continue; $action = substr($flowbit, 0, strpos($flowbit, ",")); if (!strcasecmp(substr($action, 0, 3), "set")) { $tmp = substr($flowbit, strpos($flowbit, ",") +1 ); if (!empty($tmp) && in_array($tmp, $unchecked_flowbits)) { if (!is_array($required_flowbits_rules[$k1])) $required_flowbits_rules[$k1] = array(); if (!is_array($required_flowbits_rules[$k1][$k2])) $required_flowbits_rules[$k1][$k2] = array(); $required_flowbits_rules[$k1][$k2]['category'] = $rule2['category']; if ($rule2['disabled'] == 0) /* If not disabled, just return the rule text "as is" */ $required_flowbits_rules[$k1][$k2]['rule'] = ltrim($rule2['rule']); else /* If rule is disabled, remove leading '#' to enable it */ $required_flowbits_rules[$k1][$k2]['rule'] = ltrim(substr($rule2['rule'], strpos($rule2['rule'], "#") + 1)); } } } } } unset($rule, $rule2); return $required_flowbits_rules; } function snort_resolve_flowbits($rule_path) { /******************************************************/ /* This function auto-resolves flowbit requirements */ /* by finding all checked flowbits in the currently */ /* enabled rules, and then making sure all the "set" */ /* flowbit rules for those "checked" flowbits are */ /* enabled. For any that are not enabled, they are */ /* copied to an array, enabled, and returned. */ /* */ /* $rule_path --> rules files of the interface */ /* to resolve flowbit dependencies */ /* for. This can be either of the */ /* following: */ /* - directory of *.rules files */ /* - array of *.rules filenames */ /* - a single *.rules filename */ /******************************************************/ $snortdir = SNORTDIR; /* First, load up all the enabled rules. */ $rules_map = snort_load_rules_map($rule_path); /* Next, find all the "checked" and "set" flowbits. */ $checked_flowbits = snort_get_checked_flowbits($rules_map); $set_flowbits = snort_get_set_flowbits($rules_map); /* We're done with the first rules array, so cleanup */ /* to conserve memory. */ unset($rules_map); /* Next find any "checked" flowbits without matching */ /* "set" flowbit rules in the enabled rule set. */ $delta_flowbits = array_diff($checked_flowbits, $set_flowbits); /* Cleanup and release the memory we no longer need. */ unset($checked_flowbits); unset($set_flowbits); /* Now find all the needed "set flowbit" rules from */ /* the master list of all rules. */ $all_rules_map = snort_load_rules_map("{$snortdir}/rules/"); $required_rules = snort_find_flowbit_required_rules($all_rules_map, $delta_flowbits); /* Cleanup and release memory we no longer need. */ unset($all_rules_map); unset($delta_flowbits); return $required_rules; } function snort_write_flowbit_rules_file(&$flowbit_rules, $rule_file) { /************************************************/ /* This function takes an array of rules in the */ /* rules_map format and writes them to the file */ /* given. */ /************************************************/ if (empty($flowbit_rules)) return; /* See if we were passed a directory or full */ /* filename to write the rules to, and adjust */ /* the destination argument accordingly. */ if (is_dir($rule_file)) $rule_file = rtrim($rule_file, '/').'/flowbit-required.rules'; $fp = fopen($rule_file, "w"); if ($fp) { @fwrite($fp, "# These rules set flowbits checked by your other enabled rules. If the\n"); @fwrite($fp, "# the dependent flowbits are not set, then some of your chosen rules may\n"); @fwrite($fp, "# not fire. Enabling all rules that set these dependent flowbits ensures\n"); @fwrite($fp, "# your chosen rules fire as intended.\n#\n"); @fwrite($fp, "# If you wish to prevent alerts from any of these rules, add the GID:SID\n"); @fwrite($fp, "# of the rule to the Suppression List for the interface.\n"); foreach ($flowbit_rules as $k1 => $rule) { foreach ($rule as $k2 => $rule2) { @fwrite($fp, "\n# Category: {$rule2['category']}"); @fwrite($fp, " GID:{$k1} SID:{$k2}\n"); @fwrite($fp, $rule2['rule']); } } fclose($fp); } } function snort_load_vrt_policy($policy) { /************************************************/ /* This function returns an array of all rules */ /* marked with the passed in $policy metadata. */ /* */ /* $policy --> desired VRT security policy */ /* 1. connectivity */ /* 2. balanced */ /* 3. security */ /************************************************/ $snortdir = SNORTDIR; $vrt_policy_rules = array(); /* Create regular expression for searching. */ $policy_pcre = "/policy\\s" . $policy . "/i"; /* First, load up all the rules we have. */ $all_rules_map = snort_load_rules_map("{$snortdir}/rules/"); /* Now walk the rules list and find all those */ /* that are defined as active for the chosen */ /* security policy. */ foreach ($all_rules_map as $k1 => $arulem) { foreach ($arulem as $k2 => $arulem2) { if (preg_match($policy_pcre, $arulem2['rule'])) { if (!preg_match('/flowbits\s*:\s*noalert/i', $arulem2['rule'])) { if (!is_array($vrt_policy_rules[$k1])) $vrt_policy_rules[$k1] = array(); if (!is_array($vrt_policy_rules[$k1][$k2])) $vrt_policy_rules[$k1][$k2] = array(); $vrt_policy_rules[$k1][$k2] = $arulem2; /* Enable the policy rule if disabled */ if ($arulem2['disabled'] == 1) $vrt_policy_rules[$k1][$k2]['rule'] = ltrim(substr($arulem2['rule'], strpos($arulem2['rule'], "#") + 1)); } } } } /* Release memory we no longer need. */ unset($all_rules_map, $arulem, $arulem2); /* Return all the rules that match the policy. */ return $vrt_policy_rules; } function snort_write_enforcing_rules_file(&$rule_map, $rule_path) { /************************************************/ /* This function takes a rules map array of */ /* the rules chosen for the active rule set */ /* and writes them out to the passed path. */ /************************************************/ global $snort_enforcing_rules_file; $rule_file = "/snort.rules"; /* See if we were passed a directory or full */ /* filename to write the rules to, and adjust */ /* the destination argument accordingly. */ if (is_dir($rule_path)) $rule_file = rtrim($rule_path, '/').$rule_file; else $rule_file = $rule_path; $fp = fopen($rule_file, "w"); if ($fp) { @fwrite($fp, "# These rules are your current set of enforced rules for the protected\n"); @fwrite($fp, "# interface. This list was compiled from the categories selected on the\n"); @fwrite($fp, "# CATEGORIES tab of the Snort configuration for the interface and/or any\n"); @fwrite($fp, "# chosen Snort VRT pre-defined IPS Policy.\n#\n"); @fwrite($fp, "# Any enablesid or disablesid customizations you made have been applied\n"); @fwrite($fp, "# to the rules in this file.\n\n"); foreach ($rule_map as $rulem) { foreach ($rulem as $rulem2) { @fwrite($fp, $rulem2['rule']); } } fclose($fp); } } function snort_load_sid_mods($sids, $value) { /*****************************************/ /* This function parses the string of */ /* SID values in $sids and returns an */ /* array with the SID as the key and */ /* passed $value as the value. The SID */ /* values in $sids are assumed to be */ /* delimited by "||". */ /*****************************************/ $result = array(); if (empty($sids) || empty($value)) return $result; $tmp = explode("||", $sids); foreach ($tmp as $v) { if (preg_match('/\s\d+/', $v, $match)) $result[trim($match[0])] = $value; } return $result; } function snort_modify_sids(&$rule_map, $snortcfg) { /*****************************************/ /* This function modifies the rules in */ /* the passed rules_map array based on */ /* values in the enablesid/disablesid */ /* configuration parameters. */ /* */ /* $rule_map = array of current rules */ /* $snortcfg = config settings */ /*****************************************/ if (!isset($snortcfg['rule_sid_on']) && !isset($snortcfg['rule_sid_off'])) return; /* Load up our enablesid and disablesid */ /* arrays with lists of modified SIDs */ $enablesid = snort_load_sid_mods($snortcfg['rule_sid_on'], "enablesid"); $disablesid = snort_load_sid_mods($snortcfg['rule_sid_off'], "disablesid"); /* Turn on any rules that need to be */ /* forced "on" with enablesid mods. */ if (!empty($enablesid)) { foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (in_array($k2, $enablesid) && $v['disabled'] == 1) $rule_map[$k1][$k2]['rule'] = ltrim(substr($v['rule'], strpos($v['rule'], "#") + 1)); } } } /* Turn off any rules that need to be */ /* forced "off" with disablesid mods. */ if (!empty($disablesid)) { foreach ($rule_map as $k1 => $rulem) { foreach ($rulem as $k2 => $v) { if (in_array($k2, $disablesid) && $v['disabled'] == 0) $rule_map[$k1][$k2]['rule'] = "# " . $v['rule']; } } } } /* Start of main config files */ /* open snort.sh for writing" */ function snort_create_rc() { global $config, $g; $snortdir = SNORTDIR; if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; $snortconf =& $config['installedpackages']['snortglobal']['rule']; /* do not start config build if rules is empty */ if (empty($snortconf)) return; $start_snort_iface_start = array(); $start_snort_iface_stop = array(); foreach ($snortconf as $value) { $snort_uuid = $value['uuid']; $if_real = snort_get_real_interface($value['interface']); $start_barnyard = << {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid fi /bin/pgrep -F {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid if [ $? = 0 ]; then /bin/pkill -HUP -F {$g['varrun_path']}/barnyard2_{$if_real}{$snort_uuid}.pid -a else /usr/local/bin/barnyard2 -r {$snort_uuid} -f snort_{$snort_uuid}_{$if_real}.u2 --pid-path {$g['varrun_path']} --nolock-pidfile -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/barnyard2.conf -d /var/log/snort/snort_{$if_real}{$snort_uuid} -D -q fi EOE; $stop_barnyard2 = << {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid fi /bin/pgrep -nF {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid if [ $? = 0 ]; then /bin/pkill -HUP -F {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid -a /usr/bin/logger -p daemon.info -i -t SnortStartup "Snort SOFT START For {$value['descr']}({$snort_uuid}_{$if_real})..." else # Start snort and barnyard2 /bin/rm {$g['varrun_path']}/snort_{$if_real}{$snort_uuid}.pid /usr/local/bin/snort -R {$snort_uuid} -D -q -l /var/log/snort/snort_{$if_real}{$snort_uuid} --pid-path {$g['varrun_path']} --nolock-pidfile -G {$snort_uuid} -c {$snortdir}/snort_{$snort_uuid}_{$if_real}/snort.conf -i {$if_real} /usr/bin/logger -p daemon.info -i -t SnortStartup "Snort START For {$value['descr']}({$snort_uuid}_{$if_real})..." fi sleep 2 {$start_barnyard2} EOE; $start_snort_iface_stop[] = << "/usr/local/lib/snort/dynamicrules", "dynamicengine" => "/usr/local/lib/snort/dynamicengine", "dynamicpreprocessor" => "/usr/local/lib/snort/dynamicpreprocessor" ); foreach ($snort_dirs as $dir) { if (is_dir($dir)) mwexec("/bin/rm -rf {$dir}", true); } } /* Remove snort cron entries Ugly code needs smoothness*/ if (!function_exists('snort_deinstall_cron')) { function snort_deinstall_cron($crontask) { global $config, $g; if(!is_array($config['cron']['item'])) return; $x=0; $is_installed = false; foreach($config['cron']['item'] as $item) { if (strstr($item['command'], $crontask)) { $is_installed = true; break; } $x++; } if ($is_installed == true) unset($config['cron']['item'][$x]); } } snort_deinstall_cron("snort2c"); snort_deinstall_cron("snort_check_for_rule_updates.php"); snort_deinstall_cron("snort_check_cron_misc.inc"); configure_cron(); /* Keep this as a last step */ if ($config['installedpackages']['snortglobal']['forcekeepsettings'] != 'on') unset($config['installedpackages']['snortglobal']); } function snort_generate_conf($snortcfg) { global $config, $g; $snortdir = SNORTDIR; $snortlogdir = SNORTLOGDIR; $flowbit_rules_file = "flowbit-required.rules"; $snort_enforcing_rules_file = "snort.rules"; if (!is_array($config['installedpackages']['snortglobal']['rule'])) return; $if_real = snort_get_real_interface($snortcfg['interface']); $snort_uuid = $snortcfg['uuid']; $snortcfgdir = "{$snortdir}/snort_{$snort_uuid}_{$if_real}"; /* custom home nets */ $home_net_list = snort_build_list($snortcfg, $snortcfg['homelistname']); $home_net = implode(",", $home_net_list); $external_net = '!$HOME_NET'; if (!empty($snortcfg['externallistname']) && $snortcfg['externallistname'] != 'default') { $external_net_list = snort_build_list($snortcfg, $snortcfg['externallistname']); $external_net = implode(",", $external_net_list); } /* user added arguments */ $snort_config_pass_thru = str_replace("\r", "", base64_decode($snortcfg['configpassthru'])); /* create a few directories and ensure the sample files are in place */ $snort_dirs = array( $snortdir, $snortcfgdir, "{$snortcfgdir}/rules", "{$snortlogdir}/snort_{$if_real}{$snort_uuid}", "{$snortlogdir}/snort_{$if_real}{$snort_uuid}/barnyard2", "{$snortcfgdir}/preproc_rules", "dynamicrules" => "/usr/local/lib/snort/dynamicrules", "dynamicengine" => "/usr/local/lib/snort/dynamicengine", "dynamicpreprocessor" => "{$snortcfgdir}/dynamicpreprocessor" ); foreach ($snort_dirs as $dir) { if (!is_dir($dir)) safe_mkdir($dir); } $snort_files = array("gen-msg.map", "classification.config", "reference.config", "sid-msg.map", "unicode.map", "threshold.conf", "preproc_rules/preprocessor.rules", "preproc_rules/decoder.rules", "preproc_rules/sensitive-data.rules" ); foreach ($snort_files as $file) { if (file_exists("{$snortdir}/{$file}")) @copy("{$snortdir}/{$file}", "{$snortcfgdir}/{$file}"); } /* define alertsystemlog */ $alertsystemlog_type = ""; if ($snortcfg['alertsystemlog'] == "on") $alertsystemlog_type = "output alert_syslog: log_alert"; /* define snortunifiedlog */ $snortunifiedlog_type = ""; if ($snortcfg['snortunifiedlog'] == "on") $snortunifiedlog_type = "output unified2: filename snort_{$snort_uuid}_{$if_real}.u2, limit 128"; /* define spoink */ $spoink_type = ""; if ($snortcfg['blockoffenders7'] == "on") { $pfkill = ""; if ($snortcfg['blockoffenderskill'] == "on") $pfkill = "kill"; /* No subnets to default addresses */ $spoink_wlist = snort_build_list($snortcfg, $snortcfg['whitelistname'], true); /* write whitelist */ @file_put_contents("{$snortcfgdir}/{$snortcfg['whitelistname']}", implode("\n", $spoink_wlist)); $spoink_type = "output alert_pf: {$snortcfgdir}/{$snortcfg['whitelistname']},snort2c,{$snortcfg['blockoffendersip']},{$pfkill}"; } /* define selected suppress file */ $suppress_file_name = ""; $suppress = snort_find_list($snortcfg['suppresslistname'], 'suppress'); if (!empty($suppress)) { $suppress_data = str_replace("\r", "", base64_decode($suppress['suppresspassthru'])); @file_put_contents("{$snortcfgdir}/supp{$snortcfg['suppresslistname']}", $suppress_data); $suppress_file_name = "include {$snortcfgdir}/supp{$snortcfg['suppresslistname']}"; } /* set the snort performance model */ $snort_performance = "ac-bnfa"; if(!empty($snortcfg['performance'])) $snort_performance = $snortcfg['performance']; /* if user has defined a custom ssh port, use it */ if(is_array($config['system']['ssh']) && isset($config['system']['ssh']['port'])) $ssh_port = $config['system']['ssh']['port']; else $ssh_port = "22"; $snort_ports = array( "dns_ports" => "53", "smtp_ports" => "25", "mail_ports" => "25,143,465,691", "http_ports" => "80,901,3128,8080,9000", "oracle_ports" => "1521", "mssql_ports" => "1433", "telnet_ports" => "23","snmp_ports" => "161", "ftp_ports" => "21", "ssh_ports" => $ssh_port, "pop2_ports" => "109", "pop3_ports" => "110", "imap_ports" => "143", "sip_proxy_ports" => "5060:5090,16384:32768", "sip_ports" => "5060:5090,16384:32768", "auth_ports" => "113", "finger_ports" => "79", "irc_ports" => "6665,6666,6667,6668,6669,7000", "smb_ports" => "139,445", "nntp_ports" => "119", "rlogin_ports" => "513", "rsh_ports" => "514", "ssl_ports" => "443,465,563,636,989,990,992,993,994,995", "file_data_ports" => "\$HTTP_PORTS,110,143", "shellcode_ports" => "!80", "sun_rpc_ports" => "111,32770,32771,32772,32773,32774,32775,32776,32777,32778,32779", "DCERPC_NCACN_IP_TCP" => "139,445", "DCERPC_NCADG_IP_UDP" => "138,1024:", "DCERPC_NCACN_IP_LONG" => "135,139,445,593,1024:", "DCERPC_NCACN_UDP_LONG" => "135,1024:", "DCERPC_NCACN_UDP_SHORT" => "135,593,1024:", "DCERPC_NCACN_TCP" => "2103,2105,2107", "DCERPC_BRIGHTSTORE" => "6503,6504", "DNP3_PORTS" => "20000", "MODBUS_PORTS" => "502" ); $portvardef = ""; foreach ($snort_ports as $alias => $avalue) { if (!empty($snortcfg["def_{$alias}"]) && is_alias($snortcfg["def_{$alias}"])) $snort_ports[$alias] = filter_expand_alias($snortcfg["def_{$alias}"]); $snort_ports[$alias] = str_replace(" ", ",", trim($snort_ports[$alias])); $portvardef .= "portvar " . strtoupper($alias) . " [" . $snort_ports[$alias] . "]\n"; } ///////////////////////////// /* preprocessor code */ /* def perform_stat */ $perform_stat = << \ cmd_validity STRU < char FRP > \ cmd_validity ALLO < int [ char R int ] > \ cmd_validity TYPE < { char AE [ char NTC ] | char I | char L [ number ] } > \ cmd_validity MDTM < [ date nnnnnnnnnnnnnn[.n[n[n]]] ] string > \ cmd_validity PORT < host_port > preprocessor ftp_telnet_protocol: ftp client default \ max_resp_len 256 \ bounce yes \ telnet_cmds yes EOD; $pop_ports = str_replace(",", " ", $snort_ports['pop3_ports']); $pop_preproc = << "\$HOME_NET", "smtp_servers" => "\$HOME_NET", "http_servers" => "\$HOME_NET", "www_servers" => "\$HOME_NET", "sql_servers" => "\$HOME_NET", "telnet_servers" => "\$HOME_NET", "snmp_servers" => "\$HOME_NET", "ftp_servers" => "\$HOME_NET", "ssh_servers" => "\$HOME_NET", "pop_servers" => "\$HOME_NET", "imap_servers" => "\$HOME_NET", "sip_proxy_ip" => "\$HOME_NET", "sip_servers" => "\$HOME_NET", "rpc_servers" => "\$HOME_NET", "dnp3_server" => "\$HOME_NET", "dnp3_client" => "\$HOME_NET", "modbus_server" => "\$HOME_NET", "modbus_client" => "\$HOME_NET", "enip_server" => "\$HOME_NET", "enip_client" => "\$HOME_NET", "aim_servers" => "64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24" ); $vardef = ""; foreach ($snort_servers as $alias => $avalue) { if (!empty($snortcfg["def_{$alias}"]) && is_alias($snortcfg["def_{$alias}"])) { $avalue = filter_expand_alias($snortcfg["def_{$alias}"]); $avalue = str_replace(" ", ",", trim($avalue)); } $vardef .= "var " . strtoupper($alias) . " [{$avalue}]\n"; } $snort_preproc_libs = array( "dce_rpc_2" => "dce2_preproc", "dns_preprocessor" => "dns_preproc", "ftp_preprocessor" => "ftptelnet_preproc", "imap_preproc" => "imap_preproc", "pop_preproc" => "pop_preproc", "reputation_preproc" => "reputation_preproc", "sensitive_data" => "sdf_preproc", "sip_preproc" => "sip_preproc", "smtp_preprocessor" => "smtp_preproc", "ssh_preproc" => "ssh_preproc", "ssl_preproc" => "ssl_preproc", "dnp3_preproc" => "dnp3_preproc", "modbus_preproc" => "modbus_preproc" ); $snort_preproc = array ( "perform_stat", "http_inspect", "other_preprocs", "ftp_preprocessor", "smtp_preprocessor", "ssl_preproc", "sf_portscan", "dce_rpc_2", "dns_preprocessor", "sensitive_data", "pop_preproc", "imap_preproc", "dnp3_preproc", "modbus_preproc" ); $snort_preprocessors = ""; foreach ($snort_preproc as $preproc) { if ($snortcfg[$preproc] == 'on') { /* NOTE: The $$ is not a bug. Its a advanced feature of php */ if (!empty($snort_preproc_libs[$preproc])) { $preproclib = "libsf_" . $snort_preproc_libs[$preproc]; if (!file_exists($snort_dirs['dynamicpreprocessor'] . "{$preproclib}.so")) { if (file_exists("/usr/local/lib/snort/dynamicpreprocessor/{$preproclib}.so")) { @copy("/usr/local/lib/snort/dynamicpreprocessor/{$preproclib}.so", "{$snort_dirs['dynamicpreprocessor']}/{$preproclib}.so"); $snort_preprocessors .= $$preproc; $snort_preprocessors .= "\n"; } } else { $snort_preprocessors .= $$preproc; $snort_preprocessors .= "\n"; } } else { $snort_preprocessors .= $$preproc; $snort_preprocessors .= "\n"; } } } $snort_misc_include_rules = ""; if (file_exists("{$snortcfgdir}/reference.config")) $snort_misc_include_rules .= "include {$snortcfgdir}/reference.config\n"; if (file_exists("{$snortcfgdir}/classification.config")) $snort_misc_include_rules .= "include {$snortcfgdir}/classification.config\n"; if (is_dir("{$snortcfgdir}/preproc_rules")) { if ($snortcfg['sensitive_data'] == 'on') { $sedcmd = '/^#alert.*classtype:sdf/s/^#//'; if (file_exists("{$snortcfgdir}/preproc_rules/sensitive-data.rules")) $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/sensitive-data.rules\n"; } else $sedcmd = '/^alert.*classtype:sdf/s/^/#/'; if (file_exists("{$snortcfgdir}/preproc_rules/decoder.rules") && file_exists("{$snortcfgdir}/preproc_rules/preprocessor.rules")) { @file_put_contents("{$g['tmp_path']}/sedcmd", $sedcmd); mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/preprocessor.rules"); mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/decoder.rules"); @unlink("{$g['tmp_path']}/sedcmd"); $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/decoder.rules\n"; $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/preprocessor.rules\n"; } else { $snort_misc_include_rules .= "config autogenerate_preprocessor_decoder_rules\n"; log_error("Seems preprocessor/decoder rules are missing, enabling autogeneration of them"); } } else { $snort_misc_include_rules .= "config autogenerate_preprocessor_decoder_rules\n"; log_error("Seems preprocessor/decoder rules are missing, enabling autogeneration of them"); } /* generate rule sections to load */ $selected_rules_sections = ""; $dynamic_rules_sections = ""; if (!empty($snortcfg['rulesets']) || $snortcfg['ips_policy_enable'] == 'on') { $enabled_rules = array(); $enabled_files = array(); /* Remove any existing rules files (except custom rules) prior to building a new set. */ foreach (glob("{$snortcfgdir}/rules/*.rules") as $file) { if (basename($file, ".rules") != "custom") @unlink($file); } /* Create an array with the full path filenames of the enabled */ /* rule category files if we have any. */ if (!empty($snortcfg['rulesets'])) { foreach (explode("||", $snortcfg['rulesets']) as $file) $enabled_files[] = "{$snortdir}/rules/" . $file; /* Load our rules map in preparation for writing the enforcing rules file. */ $enabled_rules = snort_load_rules_map($enabled_files); } /* Check if a pre-defined Snort VRT policy is selected. If so, */ /* add all the VRT policy rules to our enforcing rule set. */ if (!empty($snortcfg['ips_policy'])) { $policy_rules = snort_load_vrt_policy($snortcfg['ips_policy']); foreach ($policy_rules as $k1 => $policy) { foreach ($policy as $k2 => $p) { if (!is_array($enabled_rules[$k1])) $enabled_rules[$k1] = array(); if (!is_array($enabled_rules[$k1][$k2])) $enabled_rules[$k1][$k2] = array(); $enabled_rules[$k1][$k2]['rule'] = $p['rule']; $enabled_rules[$k1][$k2]['category'] = $p['category']; $enabled_rules[$k1][$k2]['disabled'] = $p['disabled']; $enabled_rules[$k1][$k2]['flowbits'] = $p['flowbits']; } } unset($policy_rules); } /* Process any enablesid or disablesid modifications for the selected rules. */ snort_modify_sids($enabled_rules, $snortcfg); /* Write the enforcing rules file to the Snort interface's "rules" directory. */ snort_write_enforcing_rules_file($enabled_rules, "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"); if (file_exists("{$snortcfgdir}/rules/{$snort_enforcing_rules_file}")) $selected_rules_sections = "include \$RULE_PATH/{$snort_enforcing_rules_file}\n"; unset($enabled_rules); /* If auto-flowbit resolution is enabled, generate the dependent flowbits rules file. */ if ($snortcfg['autoflowbitrules'] == 'on') { $enabled_files[] = "{$snortcfgdir}/rules/{$snort_enforcing_rules_file}"; snort_write_flowbit_rules_file(snort_resolve_flowbits($enabled_files), "{$snortcfgdir}/rules/{$flowbit_rules_file}"); unset($enabled_files); } /* If we have the depedent flowbits rules file, then include it. */ if (file_exists("{$snortcfgdir}/rules/{$flowbit_rules_file}")) $selected_rules_sections .= "include \$RULE_PATH/{$flowbit_rules_file}\n"; } if (!empty($snortcfg['customrules'])) { @file_put_contents("{$snortcfgdir}/rules/custom.rules", base64_decode($snortcfg['customrules'])); $selected_rules_sections .= "include \$RULE_PATH/custom.rules\n"; } else @unlink("{$snortcfgdir}/rules/custom.rules"); /* Build a new sid-msg.map file from the enabled */ /* rules and copy it to the interface directory. */ snort_build_sid_msg_map("{$snortcfgdir}/rules/", "{$snortcfgdir}/sid-msg.map"); $cksumcheck = "all"; if ($snortcfg['cksumcheck'] == 'on') $cksumcheck = "none"; /* build snort configuration file */ $snort_conf_text = <<