. Copyright (C) 2003-2004 Robert Zelaya All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ require("guiconfig.inc"); if (!is_array($config['installedpackages']['snortglobal']['rule'])) { $config['installedpackages']['snortglobal']['rule'] = array(); } //nat_rules_sort(); $a_nat = &$config['installedpackages']['snortglobal']['rule']; $id = $_GET['id']; if (isset($_POST['id'])) $id = $_POST['id']; if (isset($_GET['dup'])) { $id = $_GET['dup']; $after = $_GET['dup']; } if (isset($id) && $a_nat[$id]) { $pconfig['proto'] = $a_nat[$id]['protocol']; list($pconfig['beginport'],$pconfig['endport']) = explode("-", $a_nat[$id]['external-port']); $pconfig['localip'] = $a_nat[$id]['target']; $pconfig['localbeginport'] = $a_nat[$id]['local-port']; $pconfig['descr'] = $a_nat[$id]['descr']; $pconfig['interface'] = $a_nat[$id]['interface']; $pconfig['block'] = isset($a_nat[$id]['block']); $pconfig['inline'] = isset($a_nat[$id]['inline']); if (!$pconfig['interface']) $pconfig['interface'] = "wan"; } else { $pconfig['interface'] = "wan"; } if (isset($_GET['dup'])) unset($id); if ($_POST) { if ($_POST['beginport_cust'] && !$_POST['beginport']) $_POST['beginport'] = $_POST['beginport_cust']; if ($_POST['endport_cust'] && !$_POST['endport']) $_POST['endport'] = $_POST['endport_cust']; if ($_POST['localbeginport_cust'] && !$_POST['localbeginport']) $_POST['localbeginport'] = $_POST['localbeginport_cust']; if (!$_POST['endport']) $_POST['endport'] = $_POST['beginport']; /* Make beginning port end port if not defined and endport is */ if (!$_POST['beginport'] && $_POST['endport']) $_POST['beginport'] = $_POST['endport']; unset($input_errors); $pconfig = $_POST; /* input validation */ if(strtoupper($_POST['proto']) == "TCP" or strtoupper($_POST['proto']) == "UDP" or strtoupper($_POST['proto']) == "TCP/UDP") { $reqdfields = explode(" ", "interface proto beginport endport localip localbeginport"); $reqdfieldsn = explode(",", "Interface,Protocol,External port from,External port to,NAT IP,Local port"); } else { $reqdfields = explode(" ", "interface proto localip"); $reqdfieldsn = explode(",", "Interface,Protocol,NAT IP"); } do_input_validation($_POST, $reqdfields, $reqdfieldsn, &$input_errors); // if (($_POST['localip'] && !is_ipaddroralias($_POST['localip']))) { // $input_errors[] = "\"{$_POST['localip']}\" is not valid subnet address."; // } /* only validate the ports if the protocol is TCP, UDP or TCP/UDP */ if(strtoupper($_POST['proto']) == "TCP" or strtoupper($_POST['proto']) == "UDP" or strtoupper($_POST['proto']) == "TCP/UDP") { if (($_POST['beginport'] && !is_ipaddroralias($_POST['beginport']) && !is_port($_POST['beginport']))) { $input_errors[] = "The start port must be an integer between 1 and 65535."; } if (($_POST['endport'] && !is_ipaddroralias($_POST['endport']) && !is_port($_POST['endport']))) { $input_errors[] = "The end port must be an integer between 1 and 65535."; } if (($_POST['localbeginport'] && !is_ipaddroralias($_POST['localbeginport']) && !is_port($_POST['localbeginport']))) { $input_errors[] = "The local port must be an integer between 1 and 65535."; } if ($_POST['beginport'] > $_POST['endport']) { /* swap */ $tmp = $_POST['endport']; $_POST['endport'] = $_POST['beginport']; $_POST['beginport'] = $tmp; } if (!$input_errors) { if (($_POST['endport'] - $_POST['beginport'] + $_POST['localbeginport']) > 65535) $input_errors[] = "The target port range must be an integer between 1 and 65535."; } } /* check for overlaps */ foreach ($a_nat as $natent) { if (isset($id) && ($a_nat[$id]) && ($a_nat[$id] === $natent)) continue; if ($natent['interface'] != $_POST['interface']) continue; if ($natent['external-address'] != $_POST['extaddr']) continue; if (($natent['proto'] != $_POST['proto']) && ($natent['proto'] != "tcp/udp") && ($_POST['proto'] != "tcp/udp")) continue; list($begp,$endp) = explode("-", $natent['external-port']); if (!$endp) $endp = $begp; if (!( (($_POST['beginport'] < $begp) && ($_POST['endport'] < $begp)) || (($_POST['beginport'] > $endp) && ($_POST['endport'] > $endp)))) { $input_errors[] = "The external port range overlaps with an existing entry."; break; } } if (!$input_errors) { $natent = array(); if ($_POST['extaddr']) $natent['external-address'] = $_POST['extaddr']; $natent['protocol'] = $_POST['proto']; if ($_POST['beginport'] == $_POST['endport']) $natent['external-port'] = $_POST['beginport']; else $natent['external-port'] = $_POST['beginport'] . "-" . $_POST['endport']; $natent['target'] = $_POST['localip']; $natent['local-port'] = $_POST['localbeginport']; $natent['interface'] = $_POST['interface']; $natent['descr'] = $_POST['descr']; if($_POST['block'] == "yes") $natent['block'] = true; else unset($natent['block']); if($_POST['inline'] == "yes") $natent['inline'] = true; else unset($natent['inline']); if (isset($id) && $a_nat[$id]) $a_nat[$id] = $natent; else { if (is_numeric($after)) array_splice($a_nat, $after+1, 0, array($natent)); else $a_nat[] = $natent; } write_config(); header("Location: snort_interfaces.php"); exit; } } $pgtitle = "Services: Snort Interfaces"; include("head.inc"); ?>

Interface
Choose which interface this rule applies to.
Hint: in most cases, you'll want to use WAN here.
Block all offenders >
HINT: Block all offenders that trigger an alert on the selected interface.
Enable Inline Mode >
HINT: This will enable Snort Inline mode on the selected interafce.
Inline listening port
Specify the port Snort Inline should lissten on.
Hint: Never enter a port that is already being used by the system.
Inline Divert Protocol
Choose which IP protocol Snort Inline should divert.
Hint: in most cases, you should specify All  here.
Inline Divert External port range
from:  
to:

Specify the port or port range Snort Inline should divert on the firewall's external address.
Hint: you can leave the 'to' field empty if you only want to divert a single port
Hint: you can leave from and to empty to divert all ports.
Inline IP Subnet
Enter the internal IP subnet address you wish to sniff. Leave blank for all.
e.g. 192.168.1.0/24
Description
You may enter a description here for your reference (not parsed).
 
"") foreach($config['aliases']['alias'] as $alias_name) { if(!stristr($alias_name['address'], ".")) { if($isfirst == 1) $aliases .= ","; $aliases .= "'" . $alias_name['name'] . "'"; $isfirst = 1; } else { if($addrisfirst == 1) $aliasesaddr .= ","; $aliasesaddr .= "'" . $alias_name['name'] . "'"; $addrisfirst = 1; } } ?>