All rights reserved. */ /* ========================================================================== */ /* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* ========================================================================== */ ]]> Describe your package here Describe your package requirements here Currently there are no FAQ items provided. pfblockernglistsv6 1.0 pfBlockerNG: IPv6 Alias/List Configuration /usr/local/pkg/pfblockerng/pfblockerng.inc pfBlockerNG: Save IPv6 settings pfBlockerNG
Firewall
pfblockerng_v6lists.xml
General /pkg_edit.php?xml=pfblockerng.xml&id=0 Update /pfblockerng/pfblockerng_update.php Alerts /pfblockerng/pfblockerng_alerts.php Reputation /pkg_edit.php?xml=/pfblockerng/pfblockerng_reputation.xml&id=0 IPv4 /pkg.php?xml=/pfblockerng/pfblockerng_v4lists.xml&id=0 IPv6 /pkg.php?xml=/pfblockerng/pfblockerng_v6lists.xml&id=0 Top 20 /pkg_edit.php?xml=/pfblockerng/pfblockerng_top20.xml&id=0 Africa /pkg_edit.php?xml=/pfblockerng/pfblockerng_Africa.xml&id=0 Asia /pkg_edit.php?xml=/pfblockerng/pfblockerng_Asia.xml&id=0 Europe /pkg_edit.php?xml=/pfblockerng/pfblockerng_Europe.xml&id=0 N.A. /pkg_edit.php?xml=/pfblockerng/pfblockerng_NorthAmerica.xml&id=0 Oceania /pkg_edit.php?xml=/pfblockerng/pfblockerng_Oceania.xml&id=0 S.A. /pkg_edit.php?xml=/pfblockerng/pfblockerng_SouthAmerica.xml&id=0 P.S. /pkg_edit.php?xml=/pfblockerng/pfblockerng_ProxyandSatellite.xml&id=0 Logs /pfblockerng/pfblockerng_log.php Sync /pkg_edit.php?xml=/pfblockerng/pfblockerng_sync.xml&id=0 Alias Name aliasname Alias Description description Action action Frequency cron Logging aliaslog Add a new Alias on IPv6 Network ranges / CIDR lists listtopic LINKS Firewall Alias     Firewall Rules     Firewall Logs]]> info Alias Name aliasname Example: Badguys
Do not include 'pfBlocker' or 'pfB_' in the Alias Name, it's done by package.
International, special or space characters will be ignored in firewall alias names.
]]>
input 20
List Description description input 90 info 'Format': Select the Format Type

'URL': Add direct link to list: Example: Ads, Spyware, Proxies

'pfSense Local File' Format:

  http(s)://127.0.0.1/NAME_OF_FILE   or   /usr/local/www/NAME_OF_FILE    (Files can also be placed in the /var/db/pfblockerng folders)

'Header': The 'Header' Field must be Unique, it will name the List File and it will be referenced in the pfBlockerNG Widget. Use a Unique Prefix per 'Alias Category' followed by a unique descriptor for each List.

]]>
IPv6 Lists]]> 'Format' - Select the file format that URL will retrieve.
  • 'txt' Plain txt Lists
  • 'gz' - IBlock GZ Lists in Range Format only
  • 'gz_2' - Other GZ Lists in IP or CIDR only
  • 'zip' - ZIP'd Lists
  • 'block'- IP x.x.x.0 Block type
  • 'html' - Web Links
  • 'xlsx' - Excel Lists
  • 'rsync' - RSync Lists
  • 'State' - Select the Run State for each list
    • 'ON/OFF' - Enabled / Disabled
    • 'HOLD' - Once a List has been Downloaded, list will remain Static
    'Note' - Downloaded or pfsense local file must have only one network per line and follows the syntax below:
      Network ranges: TBC
      IP Address: TBC
      CIDR: TBC
    ]]> rowhelper Format format select State state select URL or pfSense local file url input 50 Header header input 15 List Action Default: Disabled

    Select the Action for Firewall Rules on lists you have selected.

    'Disabled' Rules: Disables selection and does nothing to selected Alias.

    'Deny' Rules:
    'Deny' rules create high priority 'block' or 'reject' rules on the stated interfaces. They don't change the 'pass' rules on other interfaces. Typical uses of 'Deny' rules are:
    • Deny Both - blocks all traffic in both directions, if the source or destination IP is in the block list
    • Deny Inbound/Deny Outbound - blocks all traffic in one direction unless it is part of a session started by traffic sent in the other direction. Does not affect traffic in the other direction.
    • One way 'Deny' rules can be used to selectively block unsolicited incoming (new session) packets in one direction, while still allowing deliberate outgoing sessions to be created in the other direction.
    'Permit' Rules:
    'Permit' rules create high priority 'pass' rules on the stated interfaces. They are the opposite of Deny rules, and don't create any 'blocking' effect anywhere. They have priority over all Deny rules. Typical uses of 'Permit' rules are:
    • To ensure that traffic to/from the listed IPs will always be allowed in the stated directions. They override almost all other Firewall rules on the stated interfaces.
    • To act as a whitelist for Deny rule exceptions, for example if a large IP range or pre-created blocklist blocks a few IPs that should be accessible.
    'Match' Rules:
    'Match' or 'Log' only the traffic on the stated interfaces. This does not Block or Reject. It just Logs the traffic.
    • Match Both - Matches all traffic in both directions, if the source or destination IP is in the list.
    • Match Inbound/Match Outbound - Matches all traffic in one direction only.
    'Alias' Rules:
    'Alias' rules create an alias for the list (and do nothing else). This enables a pfBlockerNG list to be used by name, in any firewall rule or pfSense function, as desired.
    • Options - Alias Deny,  Alias Permit,  Alias Match,  Alias Native

    • 'Alias Deny' can use De-Duplication and Reputation Processes if configured.

    • 'Alias Permit' and 'Alias Match' will be saved in the Same folder as the other Permit/Match Auto-Rules

    • 'Alias Native' lists are kept in their Native format without any modifications.
    When using 'Alias' rules, change (pfB_) to ( pfb_ ) in the beginning of rule description and Use the 'Exact' spelling of the Alias (no trailing Whitespace)  Custom 'Alias' rules with 'pfB_ xxx' description will be removed by package if using Auto Rule Creation.

    Tip: You can create the Auto Rules and remove "auto rule" from the Rule Descriptions, then disable Auto Rules. This method will 'KEEP' these rules from being 'Deleted' which will allow editing for a Custom Alias Configuration
    ]]>
    action select
    Update Frequency cron Never
    Select how often List files will be downloaded. This must be within the Cron Interval/Start Hour settings.]]>
    select
    Weekly (Day of Week) dow Monday
    Select the 'Weekly' ( Day of the Week ) to Update
    This is only required for the 'Weekly' Frequency Selection. The 24 Hour Download 'Time' will be used.]]>
    select
    Enable Logging aliaslog Enable
    Select - Logging to Status: System Logs: FIREWALL ( Log )
    This can be overriden by the 'Global Logging' Option in the General Tab.]]>
    select
    Advanced Inbound Firewall Rule Settings listtopic info Note: In general Auto-Rules are created as follows:
      Inbound   - 'any' port, 'any' protocol and 'any' destination
      Outbound - 'any' port, 'any' protocol and 'any' destination address in the lists
    Configuring the Adv. Inbound Rule settings, will allow for more customization of the Inbound Auto-Rules.
    Select the pfSense 'Port' and/or 'Destination' Alias below:]]>
    autoports Enable Custom Port checkbox aliasports begin Define Alias aliasports Click Here to add/edit Aliases Do not manually enter port numbers.
    Do not use 'pfB_' in the Port Alias name.]]>
    21 aliases port end
    autodest Enable Custom Destination checkbox aliasdest,autonot begin aliasdest Click Here to add/edit Aliases Do not manually enter Addresses(es).
    Do not use 'pfB_' in the 'IP Network Type' Alias name.]]>
    21 aliases network
    Invert autonot Invert - Option to invert the sense of the match.
    ie - Not (!) Destination Address(es)]]>
    checkbox end
    Custom Protocol autoproto Default: any
    Select the Protocol used for Inbound Firewall Rule(s).]]>
    select 4
    IPv6 Custom list listtopic IPv6 Custom Address(es) custom Follow the syntax below:

    Network ranges: TBC
    IP Address: TBC
    CIDR: TBC

    You may use "#" after any IP/CIDR/Range to add comments. # Safe IP Address]]>
    textarea 50 10 base64
    Update Custom List custom_update Default' to update Custom List as per Update Frequency setting.
    Select - 'Update Custom List' followed by a 'Force Update' to apply Custom List Changes.
    Cron will also resync this Custom List at the next Update Frequency.]]>
    select
    Click to SAVE Settings and/or Rule Edits.       Changes are Applied via CRON or 'Force Update']]> listtopic pfblockerng_php_install_command(); pfblockerng_php_deinstall_command(); pfblockerng_validate_input($_POST, $input_errors); global $pfb; $pfb['save'] = TRUE; sync_package_pfblockerng();