<?php
/* COPYRIGHT */

require_once("config.inc");

function setup_wireless_olsr() {
	global $config, $g;

	if ($g['platform'] == 'jail' || !$config['installedpackages']['olsrd'] || !$config['installedpackages'])
		return;
	if(isset($config['system']['developerspew'])) {
		$mt = microtime();
		echo "setup_wireless_olsr($interface) being called $mt\n";
	}
	conf_mount_rw();

	foreach($config['installedpackages']['olsrd']['config'] as $olsrd) {
		$olsr_enable = $olsrd['enable'];
		if ($olsr_enable <> "on") {
			if (is_process_running("olsrd"))
				mwexec("/usr/bin/killall olsrd", true);
			return;
		}
		$fd = fopen("{$g['varetc_path']}/olsr.conf", "w");

		if($olsrd['announcedynamicroute'] or $olsrd['enableannounce'] == "on") {
			$enableannounce .= "\nHna4\n";
			$enableannounce .= "{\n";
		if($olsrd['announcedynamicroute'])
			$enableannounce .= "\t{$olsrd['announcedynamicroute']}\n";
		if($olsrd['enableannounce'] == "on")
			$enableannounce .= "0.0.0.0 0.0.0.0";
			$enableannounce .= "\n}\n";
		} else {
			$enableannounce = "";
		}

		$olsr .= <<<EODA
#
# olsr.org OLSR daemon config file
#
# Lines starting with a # are discarded
#
# This file was generated by setup_wireless_olsr() in services.inc
#

# This file is an example of a typical
# configuration for a mostly static
# network(regarding mobility) using
# the LQ extention

# Debug level(0-9)
# If set to 0 the daemon runs in the background

DebugLevel	2

# IP version to use (4 or 6)

IpVersion	4

# Clear the screen each time the internal state changes

ClearScreen     yes

{$enableannounce}

# Should olsrd keep on running even if there are
# no interfaces available? This is a good idea
# for a PCMCIA/USB hotswap environment.
# "yes" OR "no"

AllowNoInt	yes

# TOS(type of service) value for
# the IP header of control traffic.
# If not set it will default to 16

#TosValue	16

# The fixed willingness to use(0-7)
# If not set willingness will be calculated
# dynamically based on battery/power status
# if such information is available

#Willingness    	4

# Allow processes like the GUI front-end
# to connect to the daemon.

IpcConnect
{
     # Determines how many simultaneously
     # IPC connections that will be allowed
     # Setting this to 0 disables IPC

     MaxConnections  0

     # By default only 127.0.0.1 is allowed
     # to connect. Here allowed hosts can
     # be added

     Host            127.0.0.1
     #Host            10.0.0.5

     # You can also specify entire net-ranges
     # that are allowed to connect. Multiple
     # entries are allowed

     #Net             192.168.1.0 255.255.255.0
}

# Wether to use hysteresis or not
# Hysteresis adds more robustness to the
# link sensing but delays neighbor registration.
# Used by default. 'yes' or 'no'

UseHysteresis	no

# Hysteresis parameters
# Do not alter these unless you know
# what you are doing!
# Set to auto by default. Allowed
# values are floating point values
# in the interval 0,1
# THR_LOW must always be lower than
# THR_HIGH.

#HystScaling	0.50
#HystThrHigh	0.80
#HystThrLow	0.30


# Link quality level
# 0 = do not use link quality
# 1 = use link quality for MPR selection
# 2 = use link quality for MPR selection and routing
# Defaults to 0

LinkQualityLevel	{$olsrd['enablelqe']}

# Polling rate in seconds(float).
# Default value 0.05 sec

Pollrate	0.05


# TC redundancy
# Specifies how much neighbor info should
# be sent in TC messages
# Possible values are:
# 0 - only send MPR selectors
# 1 - send MPR selectors and MPRs
# 2 - send all neighbors
#
# defaults to 0

TcRedundancy	2

#
# MPR coverage
# Specifies how many MPRs a node should
# try select to reach every 2 hop neighbor
#
# Can be set to any integer >0
#
# defaults to 1

MprCoverage	3

# Example plugin entry with parameters:

EODA;

if($olsrd['enablehttpinfo'] == "on") {
	$olsr .= <<<EODB

LoadPlugin "/usr/local/lib/olsrd_httpinfo.so.0.1"
{
    PlParam     "port"   "{$olsrd['port']}"
    PlParam     "Net"    "{$olsrd['allowedhttpinfohost']} {$olsrd['allowedhttpinfosubnet']}"
}

EODB;

}

if($olsrd['enabledsecure'] == "on") {
	@file_put_contents("{$g['tmp_path']}/olsrkey.txt", $olsrd['securekey']);
	$olsr .= <<<EODC

LoadPlugin "/usr/local/lib/olsrd_secure.so.0.5"
{
    PlParam     "Keyfile"   "{$g['tmp_path']}/olsrkey.txt"
}

EODC;

}

if($olsrd['enabledyngw'] == "on") {

	/* unset default route, olsr auto negotiates */
	mwexec("/sbin/route delete default");

	$olsr .= <<<EODE

LoadPlugin "/usr/local/lib/olsrd_dyn_gw.so.0.4"
{
    # how often to look for a inet gw, in seconds
    # defaults to 5 secs, if commented out
    PlParam     "Interval"   "{$olsrd['polling']}"

    # if one or more IPv4 addresses are given, do a ping on these in
    # descending order to validate that there is not only an entry in
    # routing table, but also a real internet connection. If any of
    # these addresses could be pinged successfully, the test was
    # succesful, i.e. if the ping on the 1st address was successful,the
    # 2nd won't be pinged
    PlParam     "Ping"       "{$olsrd['ping']}"
    #PlParam     "HNA"   "192.168.81.0 255.255.255.0"
}

EODE;

}

foreach($config['installedpackages']['olsrd']['config'] as $conf) {
	$interfaces = explode(',', $conf['iface_array']);
	foreach($interfaces as $interface) {
		$realinterface = convert_friendly_interface_to_real_interface_name($interface);
$olsr .= <<<EODAD
Interface "{$realinterface}"
{

    # Hello interval in seconds(float)
    HelloInterval    2.0

    # HELLO validity time
    HelloValidityTime	20.0

    # TC interval in seconds(float)
    TcInterval        5.0

    # TC validity time
    TcValidityTime	30.0

    # MID interval in seconds(float)
    MidInterval	5.0

    # MID validity time
    MidValidityTime	30.0

    # HNA interval in seconds(float)
    HnaInterval	5.0

    # HNA validity time
    HnaValidityTime 	30.0

    # When multiple links exist between hosts
    # the weight of interface is used to determine
    # the link to use. Normally the weight is
    # automatically calculated by olsrd based
    # on the characteristics of the interface,
    # but here you can specify a fixed value.
    # Olsrd will choose links with the lowest value.

    # Weight 0


}

EODAD;

	}
	break;
}
		fwrite($fd, $olsr);
		fclose($fd);
	}

	if (is_process_running("olsrd"))
		mwexec("/usr/bin/killall olsrd", true);

	sleep(2);

	mwexec_bg("/usr/local/sbin/olsrd -f {$g['varetc_path']}/olsr.conf");

	conf_mount_ro();
}

?>