From f3ea1f4ba66fe80a435b8224a8eb15e3c732e04b Mon Sep 17 00:00:00 2001 From: Chris Buechler Date: Sun, 23 Jan 2011 01:18:32 -0500 Subject: move dead packages into archive to clean this up a bit. I know there are some I missed if someone else would like to review --- config/freenas/conf.kernel/pfSense.6.freenas | 433 --------------------------- 1 file changed, 433 deletions(-) delete mode 100644 config/freenas/conf.kernel/pfSense.6.freenas (limited to 'config/freenas/conf.kernel/pfSense.6.freenas') diff --git a/config/freenas/conf.kernel/pfSense.6.freenas b/config/freenas/conf.kernel/pfSense.6.freenas deleted file mode 100644 index aee11302..00000000 --- a/config/freenas/conf.kernel/pfSense.6.freenas +++ /dev/null @@ -1,433 +0,0 @@ -# -# GENERIC -- Generic kernel configuration file for FreeBSD/i386 -# -# For more information on this file, please read the handbook section on -# Kernel Configuration Files: -# -# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html -# -# The handbook is also available locally in /usr/share/doc/handbook -# if you've installed the doc distribution, otherwise always see the -# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the -# latest information. -# -# An exhaustive list of options and more detailed explanations of the -# device lines is also present in the ../../conf/NOTES and NOTES files. -# If you are in doubt as to the purpose or necessity of a line, check first -# in NOTES. -# -# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.7.2.2 2006/05/01 00:15:12 scottl Exp $ - -machine i386 -cpu I486_CPU -cpu I586_CPU -cpu I686_CPU -ident pfSense - -# To statically compile in device wiring instead of /boot/device.hints -#hints "GENERIC.hints" # Default places to look for devices. - -makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols - -#FREENAS ADD lines: -options NO_SWAPPING -options HZ=1000 - -#options SCHED_ULE # ULE scheduler -options SCHED_4BSD # 4BSD scheduler -options PREEMPTION # Enable kernel thread preemption -options INET # InterNETworking -options INET6 # IPv6 communications protocols -options FFS # Berkeley Fast Filesystem -options SOFTUPDATES # Enable FFS soft updates support -options UFS_ACL # Support for access control lists -options UFS_DIRHASH # Improve performance on big directories -options MD_ROOT # MD is a potential root device -options NFSCLIENT # Network Filesystem Client -options NFSSERVER # Network Filesystem Server -options NFS_ROOT # NFS usable as /, requires NFSCLIENT -options MSDOSFS # MSDOS Filesystem -options MSDOSFS_LARGE # MSDOS Filesystem for FAT32 > 128GB -options CD9660 # ISO 9660 Filesystem -options PROCFS # Process filesystem (requires PSEUDOFS) -options PSEUDOFS # Pseudo-filesystem framework -options GEOM_GPT # GUID Partition Tables. -options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] -options COMPAT_FREEBSD4 # Compatible with FreeBSD4 -options COMPAT_FREEBSD5 # Compatible with FreeBSD5 -options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI -options KTRACE # ktrace(1) support -options SYSVSHM # SYSV-style shared memory -options SYSVMSG # SYSV-style message queues -options SYSVSEM # SYSV-style semaphores -options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions -options KBD_INSTALL_CDEV # install a CDEV entry in /dev -options AHC_REG_PRETTY_PRINT # Print register bitfields in debug - # output. Adds ~128k to driver. -options AHD_REG_PRETTY_PRINT # Print register bitfields in debug - # output. Adds ~215k to driver. -options ADAPTIVE_GIANT # Giant mutex is adaptive. - -#FreeNAS include ACPI in the kernel: -device acpi # acpi -- Advanced Configuration and Power Management support - -device apic # I/O APIC - -# Bus support. -device eisa -device pci - -# Floppy drives -device fdc - -# ATA and ATAPI devices -device ata -device atadisk # ATA disk drives -device ataraid # ATA RAID drives -device atapicd # ATAPI CDROM drives -device atapifd # ATAPI floppy drives -#device atapifd # ATAPI floppy drives -device atapist # ATAPI tape drives -options ATA_STATIC_ID # Static device numbering - -# SCSI Controllers -device ahb # EISA AHA1742 family -device ahc # AHA2940 and onboard AIC7xxx devices -device ahd # AHA39320/29320 and onboard AIC79xx devices -device amd # AMD 53C974 (Tekram DC-390(T)) -device isp # Qlogic family -device ispfw # Firmware for QLogic HBAs- normally a module -device mpt # LSI-Logic MPT-Fusion -#device ncr # NCR/Symbios Logic -device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') -device trm # Tekram DC395U/UW/F DC315U adapters - -device adv # Advansys SCSI adapters -device adw # Advansys wide SCSI adapters -device aha # Adaptec 154x SCSI adapters -device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. -device bt # Buslogic/Mylex MultiMaster SCSI adapters - -device ncv # NCR 53C500 -device nsp # Workbit Ninja SCSI-3 -device stg # TMC 18C30/18C50 - -#FREENAS ADD SPECIAL DRIVERSAdding special IOI-A100U2W drivers: -device ihb # IOI-A100U2W drivers - -# SCSI peripherals -device scbus # SCSI bus (required for SCSI) -device ch # SCSI media changers -device da # Direct Access (disks) -device sa # Sequential Access (tape etc) -device cd # CD -device pass # Passthrough device (direct SCSI access) -device ses # SCSI Environmental Services (and SAF-TE) - -# RAID controllers interfaced to the SCSI subsystem -device amr # AMI MegaRAID -device arcmsr # Areca SATA II RAID -device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID -device ciss # Compaq Smart RAID 5* -device dpt # DPT Smartcache III, IV - See NOTES for options -device hptmv # Highpoint RocketRAID 182x -device rr232x # Highpoint RocketRAID 232x -device iir # Intel Integrated RAID -device ips # IBM (Adaptec) ServeRAID -device mly # Mylex AcceleRAID/eXtremeRAID -device twa # 3ware 9000 series PATA/SATA RAID - -# RAID controllers -device aac # Adaptec FSA RAID -device aacp # SCSI passthrough for aac (requires CAM) -device ida # Compaq Smart RAID -device mfi # LSI MegaRAID SAS -device mlx # Mylex DAC960 family -device pst # Promise Supertrak SX6000 -device twe # 3ware ATA RAID - -# atkbdc0 controls both the keyboard and the PS/2 mouse -device atkbdc # AT keyboard controller -device atkbd # AT keyboard -device psm # PS/2 mouse - -device kbdmux # keyboard multiplexer - -device vga # VGA video card driver - -device splash # Splash screen and screen saver support - -# syscons is the default console driver, resembling an SCO console -device sc - -# Enable this for the pcvt (VT220 compatible) console driver -#device vt -#options XSERVER # support for X server on a vt console -#options FAT_CURSOR # start with block cursor - -device agp # support several AGP chipsets - -# Power management support (see NOTES for more options) -#device apm -# Add suspend/resume support for the i8254. -device pmtimer - -# PCCARD (PCMCIA) support -# PCMCIA and cardbus bridge support -device cbb # cardbus (yenta) bridge -device pccard # PC Card (16-bit) bus -device cardbus # CardBus (32-bit) bus - -# Serial (COM) ports -device sio # 8250, 16[45]50 based serial ports - -# Parallel port -device ppc -device ppbus # Parallel port bus (required) -device lpt # Printer -device ppi # Parallel port interface device -#device vpo # Requires scbus and da - -# If you've got a "dumb" serial or parallel PCI card that is -# supported by the puc(4) glue driver, uncomment the following -# line to enable it (connects to the sio and/or ppc drivers): -#device puc - -# PCI Ethernet NICs. -device de # DEC/Intel DC21x4x (``Tulip'') -device em # Intel PRO/1000 adapter Gigabit Ethernet Card -device ixgb # Intel PRO/10GbE Ethernet Card -device txp # 3Com 3cR990 (``Typhoon'') -device vx # 3Com 3c590, 3c595 (``Vortex'') - -# PCI Ethernet NICs that use the common MII bus controller code. -# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! -device miibus # MII bus support -device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet -device bfe # Broadcom BCM440x 10/100 Ethernet -device bge # Broadcom BCM570xx Gigabit Ethernet -device dc # DEC/Intel 21143 and various workalikes -device fxp # Intel EtherExpress PRO/100B (82557, 82558) -device lge # Level 1 LXT1001 gigabit Ethernet -device nge # NatSemi DP83820 gigabit Ethernet -device nve # nVidia nForce MCP on-board Ethernet Networking -device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') -device re # RealTek 8139C+/8169/8169S/8110S -device rl # RealTek 8129/8139 -device sf # Adaptec AIC-6915 (``Starfire'') -device sis # Silicon Integrated Systems SiS 900/SiS 7016 -device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet -device ste # Sundance ST201 (D-Link DFE-550TX) -device ti # Alteon Networks Tigon I/II gigabit Ethernet -device tl # Texas Instruments ThunderLAN -device tx # SMC EtherPower II (83c170 ``EPIC'') -device vge # VIA VT612x gigabit Ethernet -device vr # VIA Rhine, Rhine II -device wb # Winbond W89C840F -device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') - -# ISA Ethernet NICs. pccard NICs included. -device cs # Crystal Semiconductor CS89x0 NIC -# 'device ed' requires 'device miibus' -device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards -device ex # Intel EtherExpress Pro/10 and Pro/10+ -device ep # Etherlink III based cards -device fe # Fujitsu MB8696x based cards -device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. -device le # NE2100, NE32-VL Lance Ethernet cards -device sn # SMC's 9000 series of Ethernet chips -device xe # Xircom pccard Ethernet - -# Wireless NIC cards -device wlan # 802.11 support -device an # Aironet 4500/4800 802.11 wireless NICs. -device awi # BayStack 660 and others -device ral # Ralink Technology RT2500 wireless NICs. -device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. -#device wl # Older non 802.11 Wavelan wireless NIC. - -# Pseudo devices. -device loop # Network loopback -device random # Entropy device -device ether # Ethernet support -device sl # Kernel SLIP -device ppp # Kernel PPP -device tun # Packet tunnel. -device pty # Pseudo-ttys (telnet etc) -device md # Memory "disks" -device gif # IPv6 and IPv4 tunneling -device faith # IPv6-to-IPv4 relaying (translation) - -# The `bpf' device enables the Berkeley Packet Filter. -# Be aware of the administrative consequences of enabling this! -# Note that 'bpf' is required for DHCP. -device bpf # Berkeley packet filter - -# USB support -device uhci # UHCI PCI->USB interface -device ohci # OHCI PCI->USB interface -device ehci # EHCI PCI->USB interface (USB 2.0) -device usb # USB Bus (required) -#device udbp # USB Double Bulk Pipe devices -device ugen # Generic -device uhid # "Human Interface Devices" -device ukbd # Keyboard -device ulpt # Printer -device umass # Disks/Mass storage - Requires scbus and da -device ums # Mouse -device ural # Ralink Technology RT2500USB wireless NICs -device urio # Diamond Rio 500 MP3 player -device uscanner # Scanners -# USB Ethernet, requires miibus -device aue # ADMtek USB Ethernet -device axe # ASIX Electronics USB Ethernet -device cdce # Generic USB over Ethernet -device cue # CATC USB Ethernet -device kue # Kawasaki LSI USB Ethernet -device rue # RealTek RTL8150 USB Ethernet - -# FireWire support -device firewire # FireWire bus code -device sbp # SCSI over FireWire (Requires scbus and da) -device fwe # Ethernet over FireWire (non-standard!) -device fwip - -# pfSense addons - -# Wireless NIC cards -device wlan # 802.11 support -device wlan_wep -device wlan_ccmp -device wlan_tkip -device wlan_xauth -device wlan_acl -device ath -device ath_rate_sample -device ath_hal -device an # Aironet 4500/4800 802.11 wireless NICs. -device awi # BayStack 660 and others -device iwi # Intel PRO/Wireless 2200BG -device ipw -device ral # Ralink Technology RT2500 wireless NICs. -device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. -device wl # Older non 802.11 Wavelan wireless NIC. - -options COMPAT_FREEBSD5 - -options UNIONFS # Union filesystem - -device bktr - -#options IPFIREWALL -#options DUMMYNET -#options IPDIVERT -options IPFIREWALL_DEFAULT_TO_ACCEPT -options IPFIREWALL_FORWARD -options IPFIREWALL_VERBOSE -options IPFIREWALL_VERBOSE_LIMIT - -device carp -device pf -device pflog -device pfsync -device vlan -device gre - -options IPSTEALTH -options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN -options GEOM_UZIP -options GEOM_LABEL - -options INCLUDE_CONFIG_FILE - -#options BRIDGE -options NETGRAPH #netgraph(4) system -options NETGRAPH_ASYNC -options NETGRAPH_BPF -options NETGRAPH_BRIDGE -options NETGRAPH_CISCO -options NETGRAPH_ECHO -options NETGRAPH_ETHER -options NETGRAPH_FRAME_RELAY -options NETGRAPH_HOLE -options NETGRAPH_IFACE -options NETGRAPH_KSOCKET - -options NETGRAPH_LMI -options NETGRAPH_MPPC_ENCRYPTION -options NETGRAPH_ONE2MANY -options NETGRAPH_PPP -options NETGRAPH_PPPOE -options NETGRAPH_PPTPGRE -options NETGRAPH_RFC1490 -options NETGRAPH_SOCKET -options NETGRAPH_TEE -options NETGRAPH_TTY -options NETGRAPH_UI -options NETGRAPH_VJC - -device ubsa -device ucom - -options FAST_IPSEC -#options IPSEC_NAT_T -device enc - -device crypto # core crypto support -device cryptodev # /dev/crypto for access to h/w -device rndtest # FIPS 140-2 entropy tester -device hifn # Hifn 7951, 7781, etc. -options HIFN_DEBUG # enable debugging support: hw.hifn.debug -options HIFN_RNDTEST # enable rndtest support -device ubsec # Broadcom 5501, 5601, 58xx - -options ALTQ -options ALTQ_CBQ -options ALTQ_RED -options ALTQ_RIO -options ALTQ_HFSC -options ALTQ_PRIQ -options ALTQ_NOPCC # Required for SMP builds !! - - -# Bridging -device if_bridge - -options MSGMNB=8192 # max # of bytes in a queue -options MSGMNI=40 # number of message queue identifiers -options MSGSEG=512 # number of message segments per queue -options MSGSSZ=32 # size of a message segment -options MSGTQL=2048 # max messages in system - -device tap -device hme - -# Needed for FreeSBIE 2 -options NULLFS - -# Kbdmux -device kbdmux - -device speaker - -options DEVICE_POLLING - -options ZERO_COPY_SOCKETS - -#device natpt - -device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet - -options TCP_SIGNATURE - -# To make an SMP kernel, the next two lines are needed -options SMP # Symmetric MultiProcessor Kernel -device apic # I/O APIC - -# Allow gmirror to function -options GEOM_MIRROR -options GEOM_MBR - -options PREEMPTION - - -- cgit v1.2.3