pfsense-packages/.git - pfSense packages repository

	Commit message (Collapse)	Author	Age	Files	Lines
*	Kills explicitly the clients on the package resync	Michele Di Maria	2012-02-01	1	-1/+1
\|
*	- Added a 20ms delay between each command sent from the client to LCDproc.	Michele Di Maria	2012-02-01	1	-1/+1
\| \| \| \| \|	- Better managed errors. Now the client resets the error counter every successful communication session with LCDproc (before was a global counter). The error counter is managed inside the client (lcdproc_client.php). - Because of the above change, now the "client script" (lcdclient.sh) do not cycle anymore.
*	- Fix the uptime screen	Michele Di Maria	2012-01-23	1	-1/+1
\| \| \| \| \| \|	- In the settings, "Enable LCDproc" becomes "Enable LCDproc at startup" - Added "After Install Info" message - Limited the client loop to three times. After three errors connecting to the LCDd service the client will end
*	Updates LCDProc to 0.5.5 (very experimental)	Michele Di Maria	2012-01-10	1	-1/+1
\| \| \| \|	Rename the sdelcd driver to "Watchguard Firebox w/ SDEC LCD"
*	- Removed driver "HD44780 fast" since the problem why this fork was created ↵	Michele Di Maria	2012-01-08	1	-1/+1
\| \| \| \| \| \| \| \|	has been solved in a different way - Set the custom Keys and Menu section for the "sdelcd" driver - Added the Blacklight setting. Now it is possible to optionally turn the blacklight on, off or (default) to leave it managed by the panel - Added the "output led" support for the "CFontz633" driver. This is totally to test since my panel doesn't have any output led, worked almost blind
*	Adds the sdeclcd driver.	Michele Di Maria	2012-01-06	1	-1/+1
\|
*	Many improvements/tweaks.	Michele Di Maria	2012-01-05	1	-1/+1
\| \| \| \| \| \|	- Added in the com port selection: com1 (dev/cua0), com1 and com2 alternative (dev/cuau0 and dev/cuau1) - Added com port speed selection (hope users won't make a mess) - Added Contrast/Brightness/Offbrightness selection. If the setting from the user do not match the possibility of the driver the setting is just ignored.
*	Some little fix/debug.	Michele Di Maria	2012-01-04	1	-1/+1
\| \| \| \|	Added the driver "hd44780 fast" as alternative to the previous driver that had set some delays.
*	- Added 40x2 display size (I found out that some display has this size)	Michele Di Maria	2011-12-17	1	-2/+13
\| \| \| \| \| \| \|	- I managed in the code ALL the drivers available in the package. Consider that before this change only 12 drivers on 35 were supported. Now all the selectable panels are supposed to work, with the default configuration values. If someone has problems with the new added drivers please let me know - I added the IN/OUT statistics for a selectable interface. For the selected interface IN and OUT bytes are shown - In the summary (visible to the ones that have a 4 line display) I added, if the width of the panel is bigger than 16 rows, the frequency in percent currently used - I reduced the CPU interval in the load calculation from 1s to 250ms. This because setting the refresh of the panel to 1 second was actually 2 seconts (1 to wait for the refresh, 1 to wait for the CPU calculation)
*	Many improvements	Michele Di Maria	2011-12-16	1	-0/+5
\| \| \| \| \| \| \|	1) Added the Package Info page (points to the forum page) 2) Added "(x86 only)" for the description of the nexcom driver (the only one outside the build platform) 3) Solved a problem that in certain condition caused a high CPU usage 4) Added as optional the "welcome screen+version"
*	Updates LCDProc to version 0.5.4.	Michele Di Maria	2011-12-16	1	-0/+101
	Include a full list of all the drivers available (default build). This is a development version under test, it's not granted it works in all conditions. Reference: http://redmine.pfsense.org/issues/1406