aboutsummaryrefslogtreecommitdiffstats
path: root/config
diff options
context:
space:
mode:
Diffstat (limited to 'config')
-rw-r--r--[-rwxr-xr-x]config/freeradius2/freeradius.inc855
-rw-r--r--config/freeradius2/freeradius.xml73
-rwxr-xr-x[-rw-r--r--]config/freeradius2/freeradiussettings.xml0
-rw-r--r--config/freeradius2/freeradiussqlconf.xml2
4 files changed, 824 insertions, 106 deletions
diff --git a/config/freeradius2/freeradius.inc b/config/freeradius2/freeradius.inc
index 0cf53eb8..a3558cea 100755..100644
--- a/config/freeradius2/freeradius.inc
+++ b/config/freeradius2/freeradius.inc
@@ -46,33 +46,40 @@ function freeradius_settings_resync() {
global $config;
$conf = '';
- // Definition variables for freeradiussettings
$varsettings = $config['installedpackages']['freeradiussettings']['config'][0];
- $varsettingsmaxrequesttime = $varsettings['varsettingsmaxrequesttime'];
- $varsettingscleanupdelay = $varsettings['varsettingscleanupdelay'];
- $varsettingsmaxrequests = $varsettings['varsettingsmaxrequests'];
- $varsettingslogdir = $varsettings['varsettingslogdir'];
- $varsettingsstrippednames = $varsettings['varsettingsstrippednames'];
- $varsettingsauth = $varsettings['varsettingsauth'];
- $varsettingsauthbadpass = $varsettings['varsettingsauthbadpass'];
- $varsettingsauthgoodpass = $varsettings['varsettingsauthgoodpass'];
- $varsettingshostnamelookups = $varsettings['varsettingshostnamelookups'];
- $varsettingsallowcoredumps = $varsettings['varsettingsallowcoredumps'];
- $varsettingsregularexpressions = $varsettings['varsettingsregularexpressions'];
- $varsettingsextendedexpressions = $varsettings['varsettingsextendedexpressions'];
- $varsettingsmaxattributes = $varsettings['varsettingsmaxattributes'];
- $varsettingsrejectdelay = $varsettings['varsettingsrejectdelay'];
- $varsettingsstartservers = $varsettings['varsettingsstartservers'];
- $varsettingsmaxservers = $varsettings['varsettingsmaxservers'];
- $varsettingsminspareservers = $varsettings['varsettingsminspareservers'];
- $varsettingsmaxspareservers = $varsettings['varsettingsmaxspareservers'];
- $varsettingsmaxqueuesize = $varsettings['varsettingsmaxqueuesize'];
- $varsettingsmaxrequestsperserver = $varsettings['varsettingsmaxrequestsperserver'];
+
+ // Variables: General configuration
+ $varsettingsmaxrequesttime = ($varsettings['varsettingsmaxrequesttime']?$varsettings['varsettingsmaxrequesttime']:'1024');
+ $varsettingscleanupdelay = ($varsettings['varsettingscleanupdelay']?$varsettings['varsettingscleanupdelay']:'30');
+ $varsettingsmaxrequests = ($varsettings['varsettingsmaxrequests']?$varsettings['varsettingsmaxrequests']:'5');
+ $varsettingslogdir = ($varsettings['varsettingslogdir']?$varsettings['varsettingslogdir']:'no');
+ $varsettingsstrippednames = ($varsettings['varsettingsstrippednames']?$varsettings['varsettingsstrippednames']:'no');
+
+ // Variables: Logging options
+ $varsettingsauth = ($varsettings['varsettingsauth']?$varsettings['varsettingsauth']:'yes');
+ $varsettingsauthbadpass = ($varsettings['varsettingsauthbadpass']?$varsettings['varsettingsauthbadpass']:'yes');
+ $varsettingsauthgoodpass = ($varsettings['varsettingsauthgoodpass']?$varsettings['varsettingsauthgoodpass']:'files');
+ $varsettingshostnamelookups = ($varsettings['varsettingshostnamelookups']?$varsettings['varsettingshostnamelookups']:'no');
+ $varsettingsallowcoredumps = ($varsettings['varsettingsallowcoredumps']?$varsettings['varsettingsallowcoredumps']:'no');
+ $varsettingsregularexpressions = ($varsettings['varsettingsregularexpressions']?$varsettings['varsettingsregularexpressions']:'no');
+ $varsettingsextendedexpressions = ($varsettings['varsettingsextendedexpressions']?$varsettings['varsettingsextendedexpressions']:'no');
+
+ // Variables: Security
+ $varsettingsmaxattributes = ($varsettings['varsettingsmaxattributes']?$varsettings['varsettingsmaxattributes']:'200');
+ $varsettingsrejectdelay = ($varsettings['varsettingsrejectdelay']?$varsettings['varsettingsrejectdelay']:'1');
+
+ // Variables: Thread Pool
+ $varsettingsstartservers = ($varsettings['varsettingsstartservers']?$varsettings['varsettingsstartservers']:'5');
+ $varsettingsmaxservers = ($varsettings['varsettingsmaxservers']?$varsettings['varsettingsmaxservers']:'32');
+ $varsettingsminspareservers = ($varsettings['varsettingsminspareservers']?$varsettings['varsettingsminspareservers']:'3');
+ $varsettingsmaxspareservers = ($varsettings['varsettingsmaxspareservers']?$varsettings['varsettingsmaxspareservers']:'10');
+ $varsettingsmaxqueuesize = ($varsettings['varsettingsmaxqueuesize']?$varsettings['varsettingsmaxqueuesize']:'65536');
+ $varsettingsmaxrequestsperserver = ($varsettings['varsettingsmaxrequestsperserver']?$varsettings['varsettingsmaxrequestsperserver']:'0');
// These lines are uncommented in fuction "freeradius_settings_resync" to INCLUDE / enable eap.conf
$sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0];
- $varsqlconfenable = $sqlconf['varsqlconfenable'];
- $varsqlconfenablecounter = $sqlconf['varsqlconfenablecounter'];
+ $varsqlconfenable = ($sqlconf['varsqlconfenable']?$sqlconf['varsqlconfenable']:'#\$INCLUDE sql.conf');
+ $varsqlconfenablecounter = ($sqlconf['varsqlconfenablecounter']?$sqlconf['varsqlconfenablecounter']:'#\$INCLUDE sql/mysql/counter.conf');
@@ -114,28 +121,60 @@ regular_expressions = $varsettingsregularexpressions
extended_expressions = $varsettingsextendedexpressions
EOD;
-
+// This activates virtual-server coa.
+// A better way would be if this link would only be created if there is an interface type "coa"
+// and if deleted the link will be deleted, too
+exec("ln -s /usr/local/etc/raddb/sites-available/coa /usr/local/etc/raddb/sites-enabled/");
$arrinterfaces = $config['installedpackages']['freeradiusinterfaces']['config'];
- if (is_array($arrinterfaces)) {
+ if (is_array($arrinterfaces) && !empty($arrinterfaces)) {
foreach ($arrinterfaces as $item) {
$varinterfaceip = $item['varinterfaceip'];
$varinterfaceport = $item['varinterfaceport'];
$varinterfacetype = $item['varinterfacetype'];
$varinterfaceipversion = $item['varinterfaceipversion'];
- $conf .= <<<EOD
+ // Begin "if" for interface-type = detail
+ if ($item['varinterfacetype'] == 'detail') {
+ $conf .= <<<EOD
listen {
type = $varinterfacetype
$varinterfaceipversion = $varinterfaceip
port = $varinterfaceport
- ### the following two lines are only neccessary for interface type detail
- filename = ${radacctdir}/detail
+ filename = \${radacctdir}/detail-%Y%m%d:%H
load_factor = 10
}
EOD;
+ } // End "if" for interface-type = detail
+
+ // Begin "if" for interface-type = coa
+ if ($item['varinterfacetype'] == 'coa') {
+ $conf .= <<<EOD
+listen {
+ type = $varinterfacetype
+ $varinterfaceipversion = $varinterfaceip
+ port = $varinterfaceport
+ server = coa
+}
+
+EOD;
+ } // End "if" for interface-type = detail
+
+ // Begin "if" for interface-type = auth, acct, proxy, status
+ if (($item['varinterfacetype'] == 'auth') || ($item['varinterfacetype'] == 'acct') || ($item['varinterfacetype'] == 'proxy') || ($item['varinterfacetype'] == 'status')) {
+ $conf .= <<<EOD
+listen {
+ type = $varinterfacetype
+ $varinterfaceipversion = $varinterfaceip
+ port = $varinterfaceport
+}
+
+EOD;
+ } // End "if" for interface-type = auth, acct, proxy, status
} // end foreach
- } // end if
+ } // end if array
+
+
$conf .= <<<EOD
log {
@@ -154,7 +193,7 @@ checkrad = \${sbindir}/checkrad
security {
max_attributes = $varsettingsmaxattributes
reject_delay = $varsettingsrejectdelay
- status_server = no ### Needs additional config in raddb/sites-available/status
+ status_server = yes
}
### disbale proxy module. In most environments we do not need to proxy requests to another RADIUS PROXY server
@@ -218,6 +257,9 @@ global $config;
$conf = '';
$users = $config['installedpackages']['freeradius']['config'];
+
+$usersoutput = $config['installedpackages']['freeradius']['config'][0]['usersoutput']=base64_encode(file_get_contents('/usr/local/etc/raddb/users'));
+
if (is_array($users)) {
foreach ($users as $user) {
$username = $user['username'];
@@ -353,32 +395,32 @@ function freeradius_eapconf_resync() {
$eapconf = $config['installedpackages']['freeradiuseapconf']['config'][0];
// Variables: EAP
- $vareapconfdefaulteaptype = $eapconf['vareapconfdefaulteaptype'];
- $vareapconftimerexpire = $eapconf['vareapconftimerexpire'];
- $vareapconfignoreunknowneaptypes = $eapconf['vareapconfignoreunknowneaptypes'];
- $vareapconfciscoaccountingusernamebug = $eapconf['vareapconfciscoaccountingusernamebug'];
- $vareapconfmaxsessions = $eapconf['vareapconfmaxsessions'];
+ $vareapconfdefaulteaptype = ($eapconf['vareapconfdefaulteaptype']?$eapconf['vareapconfdefaulteaptype']:'md5');
+ $vareapconftimerexpire = ($eapconf['vareapconftimerexpire']?$eapconf['vareapconftimerexpire']:'60');
+ $vareapconfignoreunknowneaptypes = ($eapconf['vareapconfignoreunknowneaptypes']?$eapconf['vareapconfignoreunknowneaptypes']:'no');
+ $vareapconfciscoaccountingusernamebug = ($eapconf['vareapconfciscoaccountingusernamebug']?$eapconf['vareapconfciscoaccountingusernamebug']:'no');
+ $vareapconfmaxsessions = ($eapconf['vareapconfmaxsessions']?$eapconf['vareapconfmaxsessions']:'4096');
// Variables: EAP-TLS and EAP-TLS with OCSP support
- $vareapconfprivatekeypassword = $eapconf['vareapconfprivatekeypassword'];
- $vareapconfprivatekeyfile = $eapconf['vareapconfprivatekeyfile'];
- $vareapconfcertificatefile = $eapconf['vareapconfcertificatefile'];
- $vareapconfcafile = $eapconf['vareapconfcafile'];
- $vareapconfdhfile = $eapconf['vareapconfdhfile'];
- $vareapconfrandomfile = $eapconf['vareapconfrandomfile'];
- $vareapconfocspenable = $eapconf['vareapconfocspenable'];
- $vareapconfocspoverridecerturl = $eapconf['vareapconfocspoverridecerturl'];
- $vareapconfocspurl = $eapconf['vareapconfocspurl'];
+ $vareapconfprivatekeypassword = ($eapconf['vareapconfprivatekeypassword']?$eapconf['vareapconfprivatekeypassword']:'whatever');
+ $vareapconfprivatekeyfile = ($eapconf['vareapconfprivatekeyfile']?$eapconf['vareapconfprivatekeyfile']:'server.pem');
+ $vareapconfcertificatefile = ($eapconf['vareapconfcertificatefile']?$eapconf['vareapconfcertificatefile']:'server.pem');
+ $vareapconfcafile = ($eapconf['vareapconfcafile']?$eapconf['vareapconfcafile']:'ca.pem');
+ $vareapconfdhfile = ($eapconf['vareapconfdhfile']?$eapconf['vareapconfdhfile']:'dh');
+ $vareapconfrandomfile = ($eapconf['vareapconfrandomfile']?$eapconf['vareapconfrandomfile']:'random');
+ $vareapconfocspenable = ($eapconf['vareapconfocspenable']?$eapconf['vareapconfocspenable']:'no');
+ $vareapconfocspoverridecerturl = ($eapconf['vareapconfocspoverridecerturl']?$eapconf['vareapconfocspoverridecerturl']:'no');
+ $vareapconfocspurl = ($eapconf['vareapconfocspurl']?$eapconf['vareapconfocspurl']:'http://127.0.0.1/ocsp/');
// Variables: EAP-TTLS
- $vareapconfttlsdefaulteaptype = $eapconf['vareapconfttlsdefaulteaptype'];
- $vareapconfttlscopyrequesttotunnel = $eapconf['vareapconfttlscopyrequesttotunnel'];
- $vareapconfttlsusetunneledreply = $eapconf['vareapconfttlsusetunneledreply'];
+ $vareapconfttlsdefaulteaptype = ($eapconf['vareapconfttlsdefaulteaptype']?$eapconf['vareapconfttlsdefaulteaptype']:'md5');
+ $vareapconfttlscopyrequesttotunnel = ($eapconf['vareapconfttlscopyrequesttotunnel']?$eapconf['vareapconfttlscopyrequesttotunnel']:'no');
+ $vareapconfttlsusetunneledreply = ($eapconf['vareapconfttlsusetunneledreply']?$eapconf['vareapconfttlsusetunneledreply']:'no');
// Variables: EAP-PEAP with MSCHAPv2
- $vareapconfpeapdefaulteaptype = $eapconf['vareapconfpeapdefaulteaptype'];
- $vareapconfpeapcopyrequesttotunnel = $eapconf['vareapconfpeapcopyrequesttotunnel'];
- $vareapconfpeapusetunneledreply = $eapconf['vareapconfpeapusetunneledreply'];
+ $vareapconfpeapdefaulteaptype = ($eapconf['vareapconfpeapdefaulteaptype']?$eapconf['vareapconfpeapdefaulteaptype']:'mschapv2');
+ $vareapconfpeapcopyrequesttotunnel = ($eapconf['vareapconfpeapcopyrequesttotunnel']?$eapconf['vareapconfpeapcopyrequesttotunnel']:'no');
+ $vareapconfpeapusetunneledreply = ($eapconf['vareapconfpeapusetunneledreply']?$eapconf['vareapconfpeapusetunneledreply']:'no');
$conf .= <<<EOD
@@ -481,34 +523,34 @@ function freeradius_sqlconf_resync() {
$sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0];
// Variables: SQL
- $varsqlconfdatabase = $sqlconf['varsqlconfdatabase'];
- $varsqlconfserver = $sqlconf['varsqlconfserver'];
- $varsqlconfport = $sqlconf['varsqlconfport'];
- $varsqlconflogin = $sqlconf['varsqlconflogin'];
- $varsqlconfpassword = $sqlconf['varsqlconfpassword'];
- $varsqlconfradiusdb = $sqlconf['varsqlconfradiusdb'];
- $varsqlconfaccttable1 = $sqlconf['varsqlconfaccttable1'];
- $varsqlconfaccttable2 = $sqlconf['varsqlconfaccttable2'];
- $varsqlconfpostauthtable = $sqlconf['varsqlconfpostauthtable'];
- $varsqlconfauthchecktable = $sqlconf['varsqlconfauthchecktable'];
- $varsqlconfauthreplytable = $sqlconf['varsqlconfauthreplytable'];
- $varsqlconfgroupchecktable = $sqlconf['varsqlconfgroupchecktable'];
- $varsqlconfgroupreplytable = $sqlconf['varsqlconfgroupreplytable'];
- $varsqlconfusergrouptable = $sqlconf['varsqlconfusergrouptable'];
- $varsqlconfreadgroups = $sqlconf['varsqlconfreadgroups'];
- $varsqlconfdeletestalesessions = $sqlconf['varsqlconfdeletestalesessions'];
- $varsqlconfsqltrace = $sqlconf['varsqlconfsqltrace'];
- $varsqlconfnumsqlsocks = $sqlconf['varsqlconfnumsqlsocks'];
- $varsqlconfconnectfailureretrydelay = $sqlconf['varsqlconfconnectfailureretrydelay'];
- $varsqlconflifetime = $sqlconf['varsqlconflifetime'];
- $varsqlconfmaxqueries = $sqlconf['varsqlconfmaxqueries'];
- $varsqlconfreadclients = $sqlconf['varsqlconfreadclients'];
- $varsqlconfnastable = $sqlconf['varsqlconfnastable'];
+ $varsqlconfdatabase = ($sqlconf['varsqlconfdatabase']?$sqlconf['varsqlconfdatabase']:'mysql');
+ $varsqlconfserver = ($sqlconf['varsqlconfserver']?$sqlconf['varsqlconfserver']:'localhost');
+ $varsqlconfport = ($sqlconf['varsqlconfport']?$sqlconf['varsqlconfport']:'3306');
+ $varsqlconflogin = ($sqlconf['varsqlconflogin']?$sqlconf['varsqlconflogin']:'radius');
+ $varsqlconfpassword = ($sqlconf['varsqlconfpassword']?$sqlconf['varsqlconfpassword']:'radpass');
+ $varsqlconfradiusdb = ($sqlconf['varsqlconfradiusdb']?$sqlconf['varsqlconfradiusdb']:'radius');
+ $varsqlconfaccttable1 = ($sqlconf['varsqlconfaccttable1']?$sqlconf['varsqlconfaccttable1']:'radacct');
+ $varsqlconfaccttable2 = ($sqlconf['varsqlconfaccttable2']?$sqlconf['varsqlconfaccttable2']:'radacct');
+ $varsqlconfpostauthtable = ($sqlconf['varsqlconfpostauthtable']?$sqlconf['varsqlconfpostauthtable']:'radpostauth');
+ $varsqlconfauthchecktable = ($sqlconf['varsqlconfauthchecktable']?$sqlconf['varsqlconfauthchecktable']:'radcheck');
+ $varsqlconfauthreplytable = ($sqlconf['varsqlconfauthreplytable']?$sqlconf['varsqlconfauthreplytable']:'radreply');
+ $varsqlconfgroupchecktable = ($sqlconf['varsqlconfgroupchecktable']?$sqlconf['varsqlconfgroupchecktable']:'radgroupcheck');
+ $varsqlconfgroupreplytable = ($sqlconf['varsqlconfgroupreplytable']?$sqlconf['varsqlconfgroupreplytable']:'radgroupreply');
+ $varsqlconfusergrouptable = ($sqlconf['varsqlconfusergrouptable']?$sqlconf['varsqlconfusergrouptable']:'radusergroup');
+ $varsqlconfreadgroups = ($sqlconf['varsqlconfreadgroups']?$sqlconf['varsqlconfreadgroups']:'yes');
+ $varsqlconfdeletestalesessions = ($sqlconf['varsqlconfdeletestalesessions']?$sqlconf['varsqlconfdeletestalesessions']:'yes');
+ $varsqlconfsqltrace = ($sqlconf['varsqlconfsqltrace']?$sqlconf['varsqlconfsqltrace']:'no');
+ $varsqlconfnumsqlsocks = ($sqlconf['varsqlconfnumsqlsocks']?$sqlconf['varsqlconfnumsqlsocks']:'5');
+ $varsqlconfconnectfailureretrydelay = ($sqlconf['varsqlconfconnectfailureretrydelay']?$sqlconf['varsqlconfconnectfailureretrydelay']:'60');
+ $varsqlconflifetime = ($sqlconf['varsqlconflifetime']?$sqlconf['varsqlconflifetime']:'0');
+ $varsqlconfmaxqueries = ($sqlconf['varsqlconfmaxqueries']?$sqlconf['varsqlconfmaxqueries']:'0');
+ $varsqlconfreadclients = ($sqlconf['varsqlconfreadclients']?$sqlconf['varsqlconfreadclients']:'yes');
+ $varsqlconfnastable = ($sqlconf['varsqlconfnastable']?$sqlconf['varsqlconfnastable']:'nas');
// These lines are uncommented in fuction "freeradius_settings_resync" to INCLUDE / enable eap.conf
// $sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0];
- // $varsqlconfenable = $sqlconf['varsqlconfenable'];
- // $varsqlconfenablecounter = $sqlconf['varsqlconfenablecounter'];
+ // $varsqlconfenable = ($sqlconf['varsqlconfenable']?$sqlconf['varsqlconfenable']:'#\$INCLUDE sql.conf');
+ // $varsqlconfenablecounter = ($sqlconf['varsqlconfenablecounter']?$sqlconf['varsqlconfenablecounter']:'#\$INCLUDE sql/mysql/counter.conf');
$conf .= <<<EOD
@@ -552,4 +594,667 @@ EOD;
restart_service('freeradius');
}
+
+function freeradius_serverdefault_resync() {
+ global $config;
+ $conf = '';
+
+ $conf .= <<<EOD
+
+######################################################################
+#
+# As of 2.0.0, FreeRADIUS supports virtual hosts using the
+# "server" section, and configuration directives.
+#
+# Virtual hosts should be put into the "sites-available"
+# directory. Soft links should be created in the "sites-enabled"
+# directory to these files. This is done in a normal installation.
+#
+# If you are using 802.1X (EAP) authentication, please see also
+# the "inner-tunnel" virtual server. You wll likely have to edit
+# that, too, for authentication to work.
+#
+# $Id$
+#
+######################################################################
+#
+# Read "man radiusd" before editing this file. See the section
+# titled DEBUGGING. It outlines a method where you can quickly
+# obtain the configuration you want, without running into
+# trouble. See also "man unlang", which documents the format
+# of this file.
+#
+# This configuration is designed to work in the widest possible
+# set of circumstances, with the widest possible number of
+# authentication methods. This means that in general, you should
+# need to make very few changes to this file.
+#
+# The best way to configure the server for your local system
+# is to CAREFULLY edit this file. Most attempts to make large
+# edits to this file will BREAK THE SERVER. Any edits should
+# be small, and tested by running the server with "radiusd -X".
+# Once the edits have been verified to work, save a copy of these
+# configuration files somewhere. (e.g. as a "tar" file). Then,
+# make more edits, and test, as above.
+#
+# There are many "commented out" references to modules such
+# as ldap, sql, etc. These references serve as place-holders.
+# If you need the functionality of that module, then configure
+# it in radiusd.conf, and un-comment the references to it in
+# this file. In most cases, those small changes will result
+# in the server being able to connect to the DB, and to
+# authenticate users.
+#
+######################################################################
+
+#
+# In 1.x, the "authorize", etc. sections were global in
+# radiusd.conf. As of 2.0, they SHOULD be in a server section.
+#
+# The server section with no virtual server name is the "default"
+# section. It is used when no server name is specified.
+#
+# We don't indent the rest of this file, because doing so
+# would make it harder to read.
+#
+
+# Authorization. First preprocess (hints and huntgroups files),
+# then realms, and finally look in the "users" file.
+#
+# Any changes made here should also be made to the "inner-tunnel"
+# virtual server.
+#
+# The order of the realm modules will determine the order that
+# we try to find a matching realm.
+#
+# Make *sure* that 'preprocess' comes before any realm if you
+# need to setup hints for the remote radius server
+authorize {
+ #
+ # Security settings. Take a User-Name, and do some simple
+ # checks on it, for spaces and other invalid characters. If
+ # it looks like the user is trying to play games, reject it.
+ #
+ # This should probably be enabled by default.
+ #
+ # See policy.conf for the definition of the filter_username policy.
+ #
+# filter_username
+
+ #
+ # The preprocess module takes care of sanitizing some bizarre
+ # attributes in the request, and turning them into attributes
+ # which are more standard.
+ #
+ # It takes care of processing the 'raddb/hints' and the
+ # 'raddb/huntgroups' files.
+ preprocess
+
+ #
+ # If you want to have a log of authentication requests,
+ # un-comment the following line, and the 'detail auth_log'
+ # section, above.
+# auth_log
+
+ #
+ # The chap module will set 'Auth-Type := CHAP' if we are
+ # handling a CHAP request and Auth-Type has not already been set
+ chap
+
+ #
+ # If the users are logging in with an MS-CHAP-Challenge
+ # attribute for authentication, the mschap module will find
+ # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
+ # to the request, which will cause the server to then use
+ # the mschap module for authentication.
+ mschap
+
+ #
+ # If you have a Cisco SIP server authenticating against
+ # FreeRADIUS, uncomment the following line, and the 'digest'
+ # line in the 'authenticate' section.
+ digest
+
+ #
+ # The WiMAX specification says that the Calling-Station-Id
+ # is 6 octets of the MAC. This definition conflicts with
+ # RFC 3580, and all common RADIUS practices. Un-commenting
+ # the "wimax" module here means that it will fix the
+ # Calling-Station-Id attribute to the normal format as
+ # specified in RFC 3580 Section 3.21
+# wimax
+
+ #
+ # Look for IPASS style 'realm/', and if not found, look for
+ # '@realm', and decide whether or not to proxy, based on
+ # that.
+# IPASS
+
+ #
+ # If you are using multiple kinds of realms, you probably
+ # want to set "ignore_null = yes" for all of them.
+ # Otherwise, when the first style of realm doesn't match,
+ # the other styles won't be checked.
+ #
+ suffix
+# ntdomain
+
+ #
+ # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
+ # authentication.
+ #
+ # It also sets the EAP-Type attribute in the request
+ # attribute list to the EAP type from the packet.
+ #
+ # As of 2.0, the EAP module returns "ok" in the authorize stage
+ # for TTLS and PEAP. In 1.x, it never returned "ok" here, so
+ # this change is compatible with older configurations.
+ #
+ # The example below uses module failover to avoid querying all
+ # of the following modules if the EAP module returns "ok".
+ # Therefore, your LDAP and/or SQL servers will not be queried
+ # for the many packets that go back and forth to set up TTLS
+ # or PEAP. The load on those servers will therefore be reduced.
+ #
+ eap {
+ ok = return
+ }
+
+ #
+ # Pull crypt'd passwords from /etc/passwd or /etc/shadow,
+ # using the system API's to get the password. If you want
+ # to read /etc/passwd or /etc/shadow directly, see the
+ # passwd module in radiusd.conf.
+ #
+# unix
+
+ #
+ # Read the 'users' file
+ files
+
+ #
+ # Look in an SQL database. The schema of the database
+ # is meant to mirror the "users" file.
+ #
+ # See "Authorization Queries" in sql.conf
+# sql
+
+ #
+ # If you are using /etc/smbpasswd, and are also doing
+ # mschap authentication, the un-comment this line, and
+ # configure the 'etc_smbpasswd' module, above.
+# etc_smbpasswd
+
+ #
+ # The ldap module will set Auth-Type to LDAP if it has not
+ # already been set
+# ldap
+
+ #
+ # Enforce daily limits on time spent logged in.
+# daily
+
+ #
+ # Use the checkval module
+# checkval
+
+ expiration
+ logintime
+
+ #
+ # If no other module has claimed responsibility for
+ # authentication, then try to use PAP. This allows the
+ # other modules listed above to add a "known good" password
+ # to the request, and to do nothing else. The PAP module
+ # will then see that password, and use it to do PAP
+ # authentication.
+ #
+ # This module should be listed last, so that the other modules
+ # get a chance to set Auth-Type for themselves.
+ #
+ pap
+
+ #
+ # If "status_server = yes", then Status-Server messages are passed
+ # through the following section, and ONLY the following section.
+ # This permits you to do DB queries, for example. If the modules
+ # listed here return "fail", then NO response is sent.
+ #
+ Autz-Type Status-Server {
+
+ }
+}
+
+
+# Authentication.
+#
+#
+# This section lists which modules are available for authentication.
+# Note that it does NOT mean 'try each module in order'. It means
+# that a module from the 'authorize' section adds a configuration
+# attribute 'Auth-Type := FOO'. That authentication type is then
+# used to pick the apropriate module from the list below.
+#
+
+# In general, you SHOULD NOT set the Auth-Type attribute. The server
+# will figure it out on its own, and will do the right thing. The
+# most common side effect of erroneously setting the Auth-Type
+# attribute is that one authentication method will work, but the
+# others will not.
+#
+# The common reasons to set the Auth-Type attribute by hand
+# is to either forcibly reject the user (Auth-Type := Reject),
+# or to or forcibly accept the user (Auth-Type := Accept).
+#
+# Note that Auth-Type := Accept will NOT work with EAP.
+#
+# Please do not put "unlang" configurations into the "authenticate"
+# section. Put them in the "post-auth" section instead. That's what
+# the post-auth section is for.
+#
+authenticate {
+ #
+ # PAP authentication, when a back-end database listed
+ # in the 'authorize' section supplies a password. The
+ # password can be clear-text, or encrypted.
+ Auth-Type PAP {
+ pap
+ }
+
+ #
+ # Most people want CHAP authentication
+ # A back-end database listed in the 'authorize' section
+ # MUST supply a CLEAR TEXT password. Encrypted passwords
+ # won't work.
+ Auth-Type CHAP {
+ chap
+ }
+
+ #
+ # MSCHAP authentication.
+ Auth-Type MS-CHAP {
+ mschap
+ }
+
+ #
+ # If you have a Cisco SIP server authenticating against
+ # FreeRADIUS, uncomment the following line, and the 'digest'
+ # line in the 'authorize' section.
+ digest
+
+ #
+ # Pluggable Authentication Modules.
+# pam
+
+ #
+ # See 'man getpwent' for information on how the 'unix'
+ # module checks the users password. Note that packets
+ # containing CHAP-Password attributes CANNOT be authenticated
+ # against /etc/passwd! See the FAQ for details.
+ #
+ # For normal "crypt" authentication, the "pap" module should
+ # be used instead of the "unix" module. The "unix" module should
+ # be used for authentication ONLY for compatibility with legacy
+ # FreeRADIUS configurations.
+ #
+ unix
+
+ # Uncomment it if you want to use ldap for authentication
+ #
+ # Note that this means "check plain-text password against
+ # the ldap database", which means that EAP won't work,
+ # as it does not supply a plain-text password.
+# Auth-Type LDAP {
+# ldap
+# }
+
+ #
+ # Allow EAP authentication.
+ eap
+
+ #
+ # The older configurations sent a number of attributes in
+ # Access-Challenge packets, which wasn't strictly correct.
+ # If you want to filter out these attributes, uncomment
+ # the following lines.
+ #
+# Auth-Type eap {
+# eap {
+# handled = 1
+# }
+# if (handled && (Response-Packet-Type == Access-Challenge)) {
+# attr_filter.access_challenge.post-auth
+# handled # override the "updated" code from attr_filter
+# }
+# }
+}
+
+
+#
+# Pre-accounting. Decide which accounting type to use.
+#
+preacct {
+ preprocess
+
+ #
+ # Session start times are *implied* in RADIUS.
+ # The NAS never sends a "start time". Instead, it sends
+ # a start packet, *possibly* with an Acct-Delay-Time.
+ # The server is supposed to conclude that the start time
+ # was "Acct-Delay-Time" seconds in the past.
+ #
+ # The code below creates an explicit start time, which can
+ # then be used in other modules.
+ #
+ # The start time is: NOW - delay - session_length
+ #
+
+# update request {
+# FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}"
+# }
+
+
+ #
+ # Ensure that we have a semi-unique identifier for every
+ # request, and many NAS boxes are broken.
+ acct_unique
+
+ #
+ # Look for IPASS-style 'realm/', and if not found, look for
+ # '@realm', and decide whether or not to proxy, based on
+ # that.
+ #
+ # Accounting requests are generally proxied to the same
+ # home server as authentication requests.
+# IPASS
+ suffix
+# ntdomain
+
+ #
+ # Read the 'acct_users' file
+ files
+}
+
+#
+# Accounting. Log the accounting data.
+#
+accounting {
+ #
+ # Create a 'detail'ed log of the packets.
+ # Note that accounting requests which are proxied
+ # are also logged in the detail file.
+ detail
+# daily
+
+ # Update the wtmp file
+ #
+ # If you don't use "radlast", you can delete this line.
+ unix
+
+ #
+ # For Simultaneous-Use tracking.
+ #
+ # Due to packet losses in the network, the data here
+ # may be incorrect. There is little we can do about it.
+ radutmp
+# sradutmp
+
+ # Return an address to the IP Pool when we see a stop record.
+# main_pool
+
+ #
+ # Log traffic to an SQL database.
+ #
+ # See "Accounting queries" in sql.conf
+# sql
+
+ #
+ # If you receive stop packets with zero session length,
+ # they will NOT be logged in the database. The SQL module
+ # will print a message (only in debugging mode), and will
+ # return "noop".
+ #
+ # You can ignore these packets by uncommenting the following
+ # three lines. Otherwise, the server will not respond to the
+ # accounting request, and the NAS will retransmit.
+ #
+# if (noop) {
+# ok
+# }
+
+ #
+ # Instead of sending the query to the SQL server,
+ # write it into a log file.
+ #
+# sql_log
+
+ # Cisco VoIP specific bulk accounting
+# pgsql-voip
+
+ # For Exec-Program and Exec-Program-Wait
+ exec
+
+ # Filter attributes from the accounting response.
+ attr_filter.accounting_response
+
+ #
+ # See "Autz-Type Status-Server" for how this works.
+ #
+ Acct-Type Status-Server {
+
+ }
+}
+
+
+# Session database, used for checking Simultaneous-Use. Either the radutmp
+# or rlm_sql module can handle this.
+# The rlm_sql module is *much* faster
+session {
+ radutmp
+
+ #
+ # See "Simultaneous Use Checking Queries" in sql.conf
+# sql
+}
+
+
+# Post-Authentication
+# Once we KNOW that the user has been authenticated, there are
+# additional steps we can take.
+post-auth {
+ # Get an address from the IP Pool.
+# main_pool
+
+ #
+ # If you want to have a log of authentication replies,
+ # un-comment the following line, and the 'detail reply_log'
+ # section, above.
+# reply_log
+
+ #
+ # After authenticating the user, do another SQL query.
+ #
+ # See "Authentication Logging Queries" in sql.conf
+# sql
+
+ #
+ # Instead of sending the query to the SQL server,
+ # write it into a log file.
+ #
+# sql_log
+
+ #
+ # Un-comment the following if you have set
+ # 'edir_account_policy_check = yes' in the ldap module sub-section of
+ # the 'modules' section.
+ #
+# ldap
+
+ # For Exec-Program and Exec-Program-Wait
+ exec
+
+ #
+ # Calculate the various WiMAX keys. In order for this to work,
+ # you will need to define the WiMAX NAI, usually via
+ #
+ # update request {
+ # WiMAX-MN-NAI = "%{User-Name}"
+ # }
+ #
+ # If you want various keys to be calculated, you will need to
+ # update the reply with "template" values. The module will see
+ # this, and replace the template values with the correct ones
+ # taken from the cryptographic calculations. e.g.
+ #
+ # update reply {
+ # WiMAX-FA-RK-Key = 0x00
+ # WiMAX-MSK = "%{EAP-MSK}"
+ # }
+ #
+ # You may want to delete the MS-MPPE-*-Keys from the reply,
+ # as some WiMAX clients behave badly when those attributes
+ # are included. See "raddb/modules/wimax", configuration
+ # entry "delete_mppe_keys" for more information.
+ #
+# wimax
+
+ # If there is a client certificate (EAP-TLS, sometimes PEAP
+ # and TTLS), then some attributes are filled out after the
+ # certificate verification has been performed. These fields
+ # MAY be available during the authentication, or they may be
+ # available only in the "post-auth" section.
+ #
+ # The first set of attributes contains information about the
+ # issuing certificate which is being used. The second
+ # contains information about the client certificate (if
+ # available).
+#
+# update reply {
+# Reply-Message += "%{TLS-Cert-Serial}"
+# Reply-Message += "%{TLS-Cert-Expiration}"
+# Reply-Message += "%{TLS-Cert-Subject}"
+# Reply-Message += "%{TLS-Cert-Issuer}"
+# Reply-Message += "%{TLS-Cert-Common-Name}"
+#
+# Reply-Message += "%{TLS-Client-Cert-Serial}"
+# Reply-Message += "%{TLS-Client-Cert-Expiration}"
+# Reply-Message += "%{TLS-Client-Cert-Subject}"
+# Reply-Message += "%{TLS-Client-Cert-Issuer}"
+# Reply-Message += "%{TLS-Client-Cert-Common-Name}"
+# }
+
+
+ # If the WiMAX module did it's work, you may want to do more
+ # things here, like delete the MS-MPPE-*-Key attributes.
+ #
+ # if (updated) {
+ # update reply {
+ # MS-MPPE-Recv-Key !* 0x00
+ # MS-MPPE-Send-Key !* 0x00
+ # }
+ # }
+
+ #
+ # Access-Reject packets are sent through the REJECT sub-section of the
+ # post-auth section.
+ #
+ # Add the ldap module name (or instance) if you have set
+ # 'edir_account_policy_check = yes' in the ldap module configuration
+ #
+ Post-Auth-Type REJECT {
+ # log failed authentications in SQL, too.
+# sql
+ attr_filter.access_reject
+ }
+}
+
+#
+# When the server decides to proxy a request to a home server,
+# the proxied request is first passed through the pre-proxy
+# stage. This stage can re-write the request, or decide to
+# cancel the proxy.
+#
+# Only a few modules currently have this method.
+#
+pre-proxy {
+# attr_rewrite
+
+ # Uncomment the following line if you want to change attributes
+ # as defined in the preproxy_users file.
+# files
+
+ # Uncomment the following line if you want to filter requests
+ # sent to remote servers based on the rules defined in the
+ # 'attrs.pre-proxy' file.
+# attr_filter.pre-proxy
+
+ # If you want to have a log of packets proxied to a home
+ # server, un-comment the following line, and the
+ # 'detail pre_proxy_log' section, above.
+# pre_proxy_log
+}
+
+#
+# When the server receives a reply to a request it proxied
+# to a home server, the request may be massaged here, in the
+# post-proxy stage.
+#
+post-proxy {
+
+ # If you want to have a log of replies from a home server,
+ # un-comment the following line, and the 'detail post_proxy_log'
+ # section, above.
+# post_proxy_log
+
+# attr_rewrite
+
+ # Uncomment the following line if you want to filter replies from
+ # remote proxies based on the rules defined in the 'attrs' file.
+# attr_filter.post-proxy
+
+ #
+ # If you are proxying LEAP, you MUST configure the EAP
+ # module, and you MUST list it here, in the post-proxy
+ # stage.
+ #
+ # You MUST also use the 'nostrip' option in the 'realm'
+ # configuration. Otherwise, the User-Name attribute
+ # in the proxied request will not match the user name
+ # hidden inside of the EAP packet, and the end server will
+ # reject the EAP request.
+ #
+ eap
+
+ #
+ # If the server tries to proxy a request and fails, then the
+ # request is processed through the modules in this section.
+ #
+ # The main use of this section is to permit robust proxying
+ # of accounting packets. The server can be configured to
+ # proxy accounting packets as part of normal processing.
+ # Then, if the home server goes down, accounting packets can
+ # be logged to a local "detail" file, for processing with
+ # radrelay. When the home server comes back up, radrelay
+ # will read the detail file, and send the packets to the
+ # home server.
+ #
+ # With this configuration, the server always responds to
+ # Accounting-Requests from the NAS, but only writes
+ # accounting packets to disk if the home server is down.
+ #
+# Post-Proxy-Type Fail {
+# detail
+# }
+}
+
+EOD;
+
+ $filename = RADDB . '/sites-available/default';
+ conf_mount_rw();
+ file_put_contents($filename, $conf);
+ chmod($filename, 0600);
+ conf_mount_ro();
+
+ restart_service('freeradius');
+}
?> \ No newline at end of file
diff --git a/config/freeradius2/freeradius.xml b/config/freeradius2/freeradius.xml
index 2d913f13..674a6266 100644
--- a/config/freeradius2/freeradius.xml
+++ b/config/freeradius2/freeradius.xml
@@ -90,7 +90,36 @@
<url>/pkg_edit.php?xml=freeradiussqlconf.xml&amp;id=0</url>
</tab>
</tabs>
-
+ <additional_files_needed>
+ <prefix>/usr/local/pkg/</prefix>
+ <chmod>0755</chmod>
+ <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusclients.xml</item>
+ </additional_files_needed>
+ <additional_files_needed>
+ <prefix>/usr/local/pkg/</prefix>
+ <chmod>0755</chmod>
+ <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussettings.xml</item>
+ </additional_files_needed>
+ <additional_files_needed>
+ <prefix>/usr/local/pkg/</prefix>
+ <chmod>0755</chmod>
+ <item>http://www.pfsense.org/packages/config/freeradius2/freeradiuseapconf.xml</item>
+ </additional_files_needed>
+ <additional_files_needed>
+ <prefix>/usr/local/pkg/</prefix>
+ <chmod>0755</chmod>
+ <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussqlconf.xml</item>
+ </additional_files_needed>
+ <additional_files_needed>
+ <prefix>/usr/local/pkg/</prefix>
+ <chmod>0755</chmod>
+ <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusinterfaces.xml</item>
+ </additional_files_needed>
+ <additional_files_needed>
+ <prefix>/usr/local/pkg/</prefix>
+ <chmod>0755</chmod>
+ <item>http://www.pfsense.org/packages/config/freeradius2/freeradius.inc</item>
+ </additional_files_needed>
<adddeleteeditpagefields>
<columnitem>
<fielddescr>Username</fielddescr>
@@ -129,36 +158,6 @@
<fieldname>vlanid</fieldname>
</columnitem>
</adddeleteeditpagefields>
- <additional_files_needed>
- <prefix>/usr/local/pkg/</prefix>
- <chmod>0755</chmod>
- <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusclients.xml</item>
- </additional_files_needed>
- <additional_files_needed>
- <prefix>/usr/local/pkg/</prefix>
- <chmod>0755</chmod>
- <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussettings.xml</item>
- </additional_files_needed>
- <additional_files_needed>
- <prefix>/usr/local/pkg/</prefix>
- <chmod>0755</chmod>
- <item>http://www.pfsense.org/packages/config/freeradius2/freeradiuseapconf.xml</item>
- </additional_files_needed>
- <additional_files_needed>
- <prefix>/usr/local/pkg/</prefix>
- <chmod>0755</chmod>
- <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussqlconf.xml</item>
- </additional_files_needed>
- <additional_files_needed>
- <prefix>/usr/local/pkg/</prefix>
- <chmod>0755</chmod>
- <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusinterfaces.xml</item>
- </additional_files_needed>
- <additional_files_needed>
- <prefix>/usr/local/pkg/</prefix>
- <chmod>0755</chmod>
- <item>http://www.pfsense.org/packages/config/freeradius2/freeradius.inc</item>
- </additional_files_needed>
<fields>
<field>
<name>GENERAL CONFIGURATION</name>
@@ -268,6 +267,17 @@
<rows>10</rows>
<cols>75</cols>
</field>
+ <field>
+ <fielddescr>Output</fielddescr>
+ <fieldname>usersoutput</fieldname>
+ <description><![CDATA[This is for experts only and should be treat with care!<br>
+ You may append (after all options from above) custom RADIUS options to this user account (separated by commas).<br>
+ <b>IMPORTANT:</b> If you don't format this field correctly freeRADIUS will not start because of syntax errors.<br>
+ Verify your changes by checking users file (/usr/local/etc/raddb/users).]]></description>
+ <type>textarea</type>
+ <rows>10</rows>
+ <cols>75</cols>
+ </field>
</fields>
<custom_delete_php_command>
freeradius_users_resync();
@@ -282,6 +292,7 @@
freeradius_users_resync();
freeradius_eapconf_resync();
freeradius_sqlconf_resync();
+ freeradius_serverdefault_resync();
exec("rm -f /usr/local/etc/raddb/sites-enabled/control-socket");
exec("rm -f /usr/local/etc/raddb/sites-enabled/inner-tunnel");
</custom_php_install_command>
diff --git a/config/freeradius2/freeradiussettings.xml b/config/freeradius2/freeradiussettings.xml
index 2f4189fd..2f4189fd 100644..100755
--- a/config/freeradius2/freeradiussettings.xml
+++ b/config/freeradius2/freeradiussettings.xml
diff --git a/config/freeradius2/freeradiussqlconf.xml b/config/freeradius2/freeradiussqlconf.xml
index 8a53b923..c8af86d6 100644
--- a/config/freeradius2/freeradiussqlconf.xml
+++ b/config/freeradius2/freeradiussqlconf.xml
@@ -300,10 +300,12 @@
</fields>
<custom_delete_php_command>
freeradius_sqlconf_resync();
+ freeradius_serverdefault_resync();
freeradius_settings_resync();
</custom_delete_php_command>
<custom_php_resync_config_command>
freeradius_sqlconf_resync();
+ freeradius_serverdefault_resync();
freeradius_settings_resync();
</custom_php_resync_config_command>
</packagegui> \ No newline at end of file