diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/portsentry/portsentry.inc | 286 | ||||
| -rw-r--r-- | config/portsentry/portsentry.xml | 120 |
2 files changed, 406 insertions, 0 deletions
diff --git a/config/portsentry/portsentry.inc b/config/portsentry/portsentry.inc new file mode 100644 index 00000000..05c8b751 --- /dev/null +++ b/config/portsentry/portsentry.inc @@ -0,0 +1,286 @@ +<?php + +function portsentry_custom_php_deinstall_command() { + conf_mount_rw(); + exec("killall portsentry"); + exec("rm -rf /usr/local/etc/portsentry*"); +} + +function portsentry_custom_php_install_command() { + global $config; + + if($config['installedpackages']['portsentry']['config'][0]['blocktcp']) + $blocktcp = "1"; + else + $blocktcp = "0"; + + if($config['installedpackages']['portsentry']['config'][0]['blockudp']) + $blockudp = "1"; + else + $blockudp = "0"; + + if($config['installedpackages']['portsentry']['config'][0]['portbanner']) + $portbanner = $config['installedpackages']['portsentry']['config'][0]['portbanner']; + else + $portbanner = "You have connected to an invalid port. Your connection has been logged."; + + if($config['installedpackages']['portsentry']['config'][0]['scantrigger']) + $scantrigger = $config['installedpackages']['portsentry']['config'][0]['scantrigger']; + else + $scantrigger = "0"; + + $isfirst = true; + $ports = ""; + foreach($config['installedpackages']['portsentry']['config'][0]['row'] as $ps) { + if(!$isfirst) + $ports .= ","; + if($ps['listenport']) + $ports .= $ps['listenport']; + $isfirst = false; + } + $tcp_ports = $ports; + $udp_ports = $ports; + + $config = <<<EOF +# PortSentry Configuration + +####################### +# Port Configurations # +####################### +# +# +# Some example port configs for classic and basic Stealth modes +# +# I like to always keep some ports at the "low" end of the spectrum. +# This will detect a sequential port sweep really quickly and usually +# these ports are not in use (i.e. tcpmux port 1) +# +# ** X-Windows Users **: If you are running X on your box, you need to be sure +# you are not binding PortSentry to port 6000 (or port 2000 for OpenWindows users). +# Doing so will prevent the X-client from starting properly. +# +# These port bindings are *ignored* for Advanced Stealth Scan Detection Mode. +# + +# Un-comment these if you are really anal: +TCP_PORTS="$tcp_ports" +UDP_PORTS="$udp_ports" + +########################################### +# Advanced Stealth Scan Detection Options # +########################################### +# +# This is the number of ports you want PortSentry to monitor in Advanced mode. +# Any port *below* this number will be monitored. Right now it watches +# everything below 1024. +# +# On many Linux systems you cannot bind above port 61000. This is because +# these ports are used as part of IP masquerading. I don't recommend you +# bind over this number of ports. Realistically: I DON'T RECOMMEND YOU MONITOR +# OVER 1024 PORTS AS YOUR FALSE ALARM RATE WILL ALMOST CERTAINLY RISE. You've been +# warned! Don't write me if you have have a problem because I'll only tell +# you to RTFM and don't run above the first 1024 ports. +# +# +#ADVANCED_PORTS_TCP="1024" +#ADVANCED_PORTS_UDP="1024" +# +# This field tells PortSentry what ports (besides listening daemons) to +# ignore. This is helpful for services like ident that services such +# as FTP, SMTP, and wrappers look for but you may not run (and probably +# *shouldn't* IMHO). +# +# By specifying ports here PortSentry will simply not respond to +# incoming requests, in effect PortSentry treats them as if they are +# actual bound daemons. The default ports are ones reported as +# problematic false alarms and should probably be left alone for +# all but the most isolated systems/networks. +# +# Default TCP ident and NetBIOS service +ADVANCED_EXCLUDE_TCP="113,139" +# Default UDP route (RIP), NetBIOS, bootp broadcasts. +ADVANCED_EXCLUDE_UDP="520,138,137,67" + + +###################### +# Configuration Files# +###################### +# +# Hosts to ignore +IGNORE_FILE="/usr/local/etc/portsentry.ignore" +# Hosts that have been denied (running history) +HISTORY_FILE="/var/db/portsentry.history" +# Hosts that have been denied this session only (temporary until next restart) +BLOCKED_FILE="/var/db/portsentry.blocked" + +############################## +# Misc. Configuration Options# +############################## +# +# DNS Name resolution - Setting this to "1" will turn on DNS lookups +# for attacking hosts. Setting it to "0" (or any other value) will shut +# it off. +RESOLVE_HOST = "1" + +################### +# Response Options# +################### +# Options to dispose of attacker. Each is an action that will +# be run if an attack is detected. If you don't want a particular +# option then comment it out and it will be skipped. +# +# The variable $TARGET$ will be substituted with the target attacking +# host when an attack is detected. The variable $PORT$ will be substituted +# with the port that was scanned. +# +################## +# Ignore Options # +################## +# These options allow you to enable automatic response +# options for UDP/TCP. This is useful if you just want +# warnings for connections, but don't want to react for +# a particular protocol (i.e. you want to block TCP, but +# not UDP). To prevent a possible Denial of service attack +# against UDP and stealth scan detection for TCP, you may +# want to disable blocking, but leave the warning enabled. +# I personally would wait for this to become a problem before +# doing though as most attackers really aren't doing this. +# The third option allows you to run just the external command +# in case of a scan to have a pager script or such execute +# but not drop the route. This may be useful for some admins +# who want to block TCP, but only want pager/e-mail warnings +# on UDP, etc. +# +# +# 0 = Do not block UDP/TCP scans. +# 1 = Block UDP/TCP scans. +# 2 = Run external command only (KILL_RUN_CMD) + +BLOCK_UDP="$block_udp" +BLOCK_TCP="$block_tcp" + +############### +# TCP Wrappers# +############### +# This text will be dropped into the hosts.deny file for wrappers +# to use. There are two formats for TCP wrappers: +# +# Format One: Old Style - The default when extended host processing +# options are not enabled. +# +KILL_HOSTS_DENY="ALL: \$TARGET\$" + +# Format Two: New Style - The format used when extended option +# processing is enabled. You can drop in extended processing +# options, but be sure you escape all '%' symbols with a backslash +# to prevent problems writing out (i.e. \%c \%h ) +# +#KILL_HOSTS_DENY="ALL: \$TARGET\$ : DENY" + +################### +# External Command# +################### +# This is a command that is run when a host connects, it can be whatever +# you want it to be (pager, etc.). This command is executed before the +# route is dropped or after depending on the KILL_RUN_CMD_FIRST option below +# +# +# I NEVER RECOMMEND YOU PUT IN RETALIATORY ACTIONS AGAINST THE HOST SCANNING +# YOU! +# +# TCP/IP is an *unauthenticated protocol* and people can make scans appear out +# of thin air. The only time it is reasonably safe (and I *never* think it is +# reasonable) to run reverse probe scripts is when using the "classic" -tcp mode. +# This mode requires a full connect and is very hard to spoof. +# +# The KILL_RUN_CMD_FIRST value should be set to "1" to force the command +# to run *before* the blocking occurs and should be set to "0" to make the +# command run *after* the blocking has occurred. +# +#KILL_RUN_CMD_FIRST = "0" +# +# \$PORT\$ +KILL_RUN_CMD="pfctl -k \$TARGET\$ ; pfctl -t virusprot -T add \$TARGET\$" + +##################### +# Scan trigger value# +##################### +# Enter in the number of port connects you will allow before an +# alarm is given. The default is 0 which will react immediately. +# A value of 1 or 2 will reduce false alarms. Anything higher is +# probably not necessary. This value must always be specified, but +# generally can be left at 0. +# +# NOTE: If you are using the advanced detection option you need to +# be careful that you don't make a hair trigger situation. Because +# Advanced mode will react for *any* host connecting to a non-used +# below your specified range, you have the opportunity to really +# break things. (i.e someone innocently tries to connect to you via +# SSL [TCP port 443] and you immediately block them). Some of you +# may even want this though. Just be careful. +# +SCAN_TRIGGER="$scan_trigger" + +###################### +# Port Banner Section# +###################### +# +# Enter text in here you want displayed to a person tripping the PortSentry. +# I *don't* recommend taunting the person as this will aggravate them. +# Leave this commented out to disable the feature +# +# Stealth scan detection modes don't use this feature +# +PORT_BANNER="$port_banner" + +EOF + + conf_mount_rw(); + // Write out configuration + $fd = fopen("/usr/local/etc/portsentry.conf", "w"); + fwrite($fd, $config); + fclose($fd); + + $svscan = <<<EOD +#!/bin/sh + +# PROVIDE: portsentry +# REQUIRE: LOGIN +# KEYWORD: FreeBSD + +. /etc/rc.subr + +name="portsentry" +rcvar=`set_rcvar` +command="/usr/local/bin/portsentry" +portsentry_enable=\${portsentry_enable-"YES"} + +start_cmd="portsentry_start" +stop_postcmd="portsentry_stop_post" + +load_rc_config \$name + +portsentry_start () { + echo "Starting svscan." + /usr/bin/env \ + PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin \ + portsentry +} + +portsentry_stop_post () { + echo "Stopping portsentry." + killall portsentry +} + +run_rc_command "\$1" + +EOD; + + $fd = fopen("/usr/local/etc/rc.d/portsentry.sh", "w"); + fwrite($fd, $svscan); + fclose($fd); + exec("chmod a+rx /usr/local/etc/rc.d/portsentry.sh"); + conf_mount_ro(); +} + +?>
\ No newline at end of file diff --git a/config/portsentry/portsentry.xml b/config/portsentry/portsentry.xml new file mode 100644 index 00000000..9ff6a167 --- /dev/null +++ b/config/portsentry/portsentry.xml @@ -0,0 +1,120 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE packagegui SYSTEM "../schema/packages.dtd"> +<?xml-stylesheet type="text/xsl" href="../xsl/package.xsl"?> +<packagegui> + <copyright> + <![CDATA[ +/* $Id$ */ +/* ========================================================================== */ +/* + portsentry.xml + Copyright (C) 2009 Scott Ullrich + All rights reserved. + */ +/* ========================================================================== */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + */ +/* ========================================================================== */ + ]]> + </copyright> + <name>portsentry</name> + <version>1.0</version> + <title>Portsentry</title> + <aftersaveredirect><![CDATA[/pkg_edit.php?xml=portsentry.xml&id=1]]></aftersaveredirect> + <include_file>/usr/local/pkg/portsentry.inc</include_file> + <menu> + <name>Portsentry</name> + <tooltiptext></tooltiptext> + <section>Services</section> + <url></url> + </menu> + <service> + <name>Portsentry</name> + <rcfile>portsentry.sh</rcfile> + <executable>portsentry</executable> + <description>The Sentry tools provide host-level security services for the Unix platform. PortSentry protect against portscans, and detect suspicious login activity on a continuous basis.</description> + </service> + <configpath>installedpackages->portsentry->config</configpath> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>077</chmod> + <item>http://www.pfsense.com/packages/config/portsentry/portsentry.inc</item> + </additional_files_needed> + <fields> + <field> + <type>rowhelper</type> + <rowhelper> + <rowhelperfield> + <fielddescr>Listen on port</fielddescr> + <fieldname>listenport</fieldname> + <description>Instructs portsentry to look for bogus activity on port</description> + <type>input</type> + <size>25</size> + </rowhelperfield> + </rowhelper> + </field> + <field> + <fielddescr>Scan trigger value</fielddescr> + <fieldname>scantrigger</fieldname> + <description>Enter in the number of port connects you will allow before an alarm is given. The default is 0 which will react immediately.A value of 1 or 2 will reduce false alarms. Anything higher is probably not necessary. This value must always be specified, but generally can be left at 0.</description> + <type>input</type> + <size>80</size> + <required/> + </field> + <field> + <fielddescr>Block TCP</fielddescr> + <fieldname>blocktcp</fieldname> + <description>Determines if portsentry will listen on defined ports using the TCP protocol.</description> + <type>checkbox</type> + <required/> + </field> + <field> + <fielddescr>Block UDP</fielddescr> + <fieldname>blockudp</fieldname> + <description>Determines if portsentry will listen on defined ports using the UDP protocol.</description> + <type>checkbox</type> + <required/> + </field> + <field> + <fielddescr>Port Banner</fielddescr> + <fieldname>portbanner</fieldname> + <description>Text to ouput when client connects to a portsentry port.</description> + <type>checkbox</type> + <required/> + </field> + </fields> + <custom_delete_php_command> + </custom_delete_php_command> + <custom_add_php_command> + </custom_add_php_command> + <custom_php_resync_config_command> + </custom_php_resync_config_command> + <custom_php_install_command> + portsentry_custom_php_install_command(); + </custom_php_install_command> + <custom_php_deinstall_command> + portsentry_custom_php_deinstall_command(); + </custom_php_deinstall_command> + <custom_php_command_before_form> + </custom_php_command_before_form> +</packagegui>
\ No newline at end of file |