aboutsummaryrefslogtreecommitdiffstats
path: root/config/squid3/squid.inc
diff options
context:
space:
mode:
Diffstat (limited to 'config/squid3/squid.inc')
-rw-r--r--config/squid3/squid.inc83
1 files changed, 43 insertions, 40 deletions
diff --git a/config/squid3/squid.inc b/config/squid3/squid.inc
index 98192253..67eaecb6 100644
--- a/config/squid3/squid.inc
+++ b/config/squid3/squid.inc
@@ -4,7 +4,7 @@
squid.inc
Copyright (C) 2006-2009 Scott Ullrich
Copyright (C) 2006 Fernando Lemos
- Copyright (C) 2008 Martin Fuchs
+ Copyright (C) 2008 Martin Fuchs
All rights reserved.
Redistribution and use in source and binary forms, with or without
@@ -36,7 +36,7 @@ require_once('pfsense-utils.inc');
require_once('pkg-utils.inc');
require_once('service-utils.inc');
-if(!function_exists("filter_configure"))
+if(!function_exists("filter_configure"))
require_once("filter.inc");
define('SQUID_CONFBASE', '/usr/local/etc/squid');
@@ -188,9 +188,9 @@ function squid_install_command() {
$config['installedpackages']['squidnac']['config'][0]['blacklist'] = $settingsnac['blacklist'];
}
}
-
+
update_status("Writing configuration... One moment please...");
-
+
write_config();
/* create cache */
@@ -347,7 +347,7 @@ function squid_validate_general($post, $input_errors) {
if (($post['transparent_proxy'] != 'on') && ($post['private_subnet_proxy_off'] == 'on')) {
$input_errors[] = "You can not bypass traffic to private subnets without using the transparent proxy.";
}
-
+
if (($post['transparent_proxy'] != 'on') && !empty($post['defined_ip_proxy_off'])) {
$input_errors[] = "You can not bypass traffic from specific IPs without using the transparent proxy.";
}
@@ -421,10 +421,10 @@ function squid_validate_cache($post, $input_errors) {
$input_errors[] = 'You must enter a valid value for \'Low-water-mark\'';
}
- if (!empty($post['cache_swap_high'])) {
+ if (!empty($post['cache_swap_high'])) {
$value = trim($post['cache_swap_high']);
if (!is_numeric($value) || ($value > 100))
- $input_errors[] = 'You must enter a valid value for \'High-water-mark\'';
+ $input_errors[] = 'You must enter a valid value for \'High-water-mark\'';
}
if ($post['donotcache'] != "") {
@@ -489,23 +489,23 @@ function squid_validate_traffic($post, $input_errors) {
$input_errors[] = "The field '$name' must contain a positive number";
}
- if (!empty($post['quick_abort_min'])) {
+ if (!empty($post['quick_abort_min'])) {
$value = trim($post['quick_abort_min']);
if (!is_numeric($value))
- $input_errors[] = "The field 'Finish when remaining KB' must contain a positive number";
- }
-
- if (!empty($post['quick_abort_max'])) {
+ $input_errors[] = "The field 'Finish when remaining KB' must contain a positive number";
+ }
+
+ if (!empty($post['quick_abort_max'])) {
$value = trim($post['quick_abort_max']);
if (!is_numeric($value))
- $input_errors[] = "The field 'Abort when remaining KB' must contain a positive number";
- }
-
- if (!empty($post['quick_abort_pct'])) {
+ $input_errors[] = "The field 'Abort when remaining KB' must contain a positive number";
+ }
+
+ if (!empty($post['quick_abort_pct'])) {
$value = trim($post['quick_abort_pct']);
if (!is_numeric($value) || ($value > 100))
- $input_errors[] = "The field 'Finish when remaining %' must contain a percentaged value";
- }
+ $input_errors[] = "The field 'Finish when remaining %' must contain a percentaged value";
+ }
}
@@ -563,7 +563,7 @@ function squid_validate_auth($post, $input_errors) {
function squid_install_cron($should_install) {
global $config, $g;
- if($g['booting']==true)
+ if($g['booting']==true)
return;
$is_installed = false;
if(!$config['cron']['item'])
@@ -587,7 +587,7 @@ function squid_install_cron($should_install) {
$cron_item['month'] = "*";
$cron_item['wday'] = "*";
$cron_item['who'] = "root";
- $cron_item['command'] = "/usr/local/sbin/squid -k rotate";
+ $cron_item['command'] = "/usr/local/sbin/squid -k rotate";
$config['cron']['item'][] = $cron_item;
parse_config(true);
write_config("Squid Log Rotation");
@@ -674,6 +674,7 @@ EOD;
foreach ($real_ifaces as $iface) {
list($ip, $mask) = $iface;
$ip = long2ip(ip2long($ip) & ip2long($mask));
+ $mask = 32-log((ip2long($mask) ^ ip2long('255.255.255.255'))+1,2);
$src .= " $ip/$mask";
}
$conf .= "# Allow local network(s) on interface(s)\n";
@@ -694,7 +695,7 @@ EOD;
}
// $conf .= "\n"; //Kill blank line after DNS-Servers
}
-
+
return $conf;
}
@@ -754,7 +755,7 @@ EOD;
elseif (file_exists(SQUID_ACLDIR . '/donotcache.acl')) {
unlink(SQUID_ACLDIR . '/donotcache.acl');
}
-
+
return $conf;
}
@@ -768,7 +769,7 @@ function squid_resync_upstream() {
if ($settings['icp_port'] == '7')
$conf .= "{$settings['icp_port']} no-query";
else
- $conf .= "{$settings['icp_port']}";
+ $conf .= "{$settings['icp_port']}";
if (!empty($settings['username']))
$conf .= " login={$settings['username']}";
@@ -797,14 +798,16 @@ function squid_resync_nac() {
$port = ($settings['proxy_port'] ? $settings['proxy_port'] : 3128);
$settings = $config['installedpackages']['squidnac']['config'][0];
$webgui_port = $config['system']['webgui']['port'];
+ $addtl_ports = $settings['addtl_ports'];
+ $addtl_sslports = $settings['addtl_sslports'];
$conf = <<<EOD
# Setup some default acls
-acl all src 0.0.0.0/0.0.0.0
-acl localhost src 127.0.0.1/255.255.255.255
-acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 $webgui_port $port 1025-65535
-acl sslports port 443 563 $webgui_port
+acl all src all
+acl localhost src 127.0.0.1/32
+acl safeports port 21 70 80 210 280 443 488 563 591 631 777 901 $webgui_port $port 1025-65535 $addtl_ports
+acl sslports port 443 563 $webgui_port $addtl_sslports
acl manager proto cache_object
acl purge method PURGE
acl connect method CONNECT
@@ -860,9 +863,9 @@ EOD;
$conf .= "http_access allow manager ext_manager_".$count."\n";
$count += 1;
}}
-
+
$conf .= <<<EOD
-
+
http_access deny manager
http_access allow purge localhost
http_access deny purge
@@ -886,12 +889,12 @@ function squid_resync_traffic() {
if (!empty($settings['quick_abort_min']) || ($settings['quick_abort_min']) == "0") $conf .= "quick_abort_min {$settings['quick_abort_min']} KB\n";
if (!empty($settings['quick_abort_max']) || ($settings['quick_abort_max']) == "0") $conf .= "quick_abort_max {$settings['quick_abort_max']} KB\n";
- if (!empty($settings['quick_abort_pct'])) $conf .= "quick_abort_pct {$settings['quick_abort_pct']}\n";
+ if (!empty($settings['quick_abort_pct'])) $conf .= "quick_abort_pct {$settings['quick_abort_pct']}\n";
$up_limit = ($settings['max_upload_size'] ? $settings['max_upload_size'] : 0);
$down_limit = ($settings['max_download_size'] ? $settings['max_download_size'] : 0);
$conf .= "request_body_max_size $up_limit KB\n";
- $conf .= 'reply_body_max_size ' . ($down_limit * 1024) . " allow all\n";
+// $conf .= 'reply_body_max_size ' . ($down_limit * 1024) . " deny all\n";
// Only apply throttling past 10MB
// XXX: Should this really be hardcoded?
@@ -1154,7 +1157,7 @@ function squid_resync() {
if (!is_service_running('squid')) {
log_error("Starting Squid");
- mwexec("/usr/local/sbin/squid -D");
+ mwexec("/usr/local/sbin/squid");
} else {
log_error("Reloading Squid for configuration sync");
mwexec("/usr/local/sbin/squid -k reconfigure");
@@ -1325,19 +1328,19 @@ function squid_generate_rules($type) {
$fw_aliases = filter_generate_aliases();
if(strstr($fw_aliases, "pptp ="))
$PPTP_ALIAS = "\$pptp";
- else
+ else
$PPTP_ALIAS = "\$PPTP";
if(strstr($fw_aliases, "PPPoE ="))
$PPPOE_ALIAS = "\$PPPoE";
- else
+ else
$PPPOE_ALIAS = "\$pppoe";
-
+
switch($type) {
case 'nat':
$rules .= "\n# Setup Squid proxy redirect\n";
if ($squid_conf['private_subnet_proxy_off'] == 'on') {
foreach ($ifaces as $iface) {
- $rules .= "no rdr on $iface proto tcp from any to { 192.168.0.0/16, 172.16.0.0/12, 10.0.0.0/8 } port 80\n";
+ $rules .= "no rdr on $iface proto tcp from any to { 192.168.0.0/16, 172.16.0.0/12, 10.0.0.0/8 } port 80\n";
}
}
if (!empty($squid_conf['defined_ip_proxy_off'])) {
@@ -1353,7 +1356,7 @@ function squid_generate_rules($type) {
}
$exempt_ip = substr($exempt_ip,2);
foreach ($ifaces as $iface) {
- $rules .= "no rdr on $iface proto tcp from { $exempt_ip } to any port 80\n";
+ $rules .= "no rdr on $iface proto tcp from { $exempt_ip } to any port 80\n";
}
}
if (!empty($squid_conf['defined_ip_proxy_off_dest'])) {
@@ -1369,7 +1372,7 @@ function squid_generate_rules($type) {
}
$exempt_dest = substr($exempt_dest,2);
foreach ($ifaces as $iface) {
- $rules .= "no rdr on $iface proto tcp from any to { $exempt_dest } port 80\n";
+ $rules .= "no rdr on $iface proto tcp from any to { $exempt_dest } port 80\n";
}
}
foreach ($ifaces as $iface) {
@@ -1394,8 +1397,8 @@ function squid_generate_rules($type) {
$rules .= "\n";
};
if($config['pppoe']['mode'] == "server" && $config['pppoe']['localip']) {
- $rules .= "pass in quick on $PPPOE_ALIAS proto tcp from any to !127.0.0.1 port $port flags S/SA keep state\n";
- }
+ $rules .= "pass in quick on $PPPOE_ALIAS proto tcp from any to !127.0.0.1 port $port flags S/SA keep state\n";
+ }
if($config['pptpd']['mode'] == "server" && $config['pptpd']['localip']) {
$rules .= "pass in quick on $PPTP_ALIAS proto tcp from any to !127.0.0.1 port $port flags S/SA keep state\n";
}