aboutsummaryrefslogtreecommitdiffstats
path: root/config/snort
diff options
context:
space:
mode:
Diffstat (limited to 'config/snort')
-rw-r--r--config/snort/bin/oinkmaster_contrib/addmsg.pl299
-rw-r--r--config/snort/bin/oinkmaster_contrib/addsid.pl382
-rw-r--r--config/snort/bin/oinkmaster_contrib/make_snortsam_map.pl265
-rw-r--r--config/snort/bin/oinkmaster_contrib/makesidex.pl261
-rw-r--r--config/snort/bin/oinkmaster_contrib/oinkgui.pl1046
-rw-r--r--config/snort/bin/oinkmaster_contrib/oinkmaster.pl2754
-rw-r--r--config/snort/bin/oinkmaster_contrib/snort_rename.pl100
-rw-r--r--config/snort/snort.xml10
8 files changed, 0 insertions, 5117 deletions
diff --git a/config/snort/bin/oinkmaster_contrib/addmsg.pl b/config/snort/bin/oinkmaster_contrib/addmsg.pl
deleted file mode 100644
index e5866d6f..00000000
--- a/config/snort/bin/oinkmaster_contrib/addmsg.pl
+++ /dev/null
@@ -1,299 +0,0 @@
-#!/usr/bin/perl -w
-
-# $Id: addmsg.pl,v 1.19 2005/12/31 13:42:46 andreas_o Exp $ #
-
-# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or
-# without modification, are permitted provided that the following
-# conditions are met:
-#
-# 1. Redistributions of source code must retain the above
-# copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials
-# provided with the distribution.
-#
-# 3. Neither the name of the author nor the names of its
-# contributors may be used to endorse or promote products
-# derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-use strict;
-
-sub get_next_entry($ $ $ $ $ $);
-sub parse_singleline_rule($ $ $);
-
-
-my $USAGE = << "RTFM";
-
-Parse Oinkmaster configuration file and add the rule's "msg" string as a
-#comment for each disablesid/enablesid line.
-
-Usage: $0 <oinkmaster.conf> <rulesdir> [rulesdir2, ...]
-
-The new config file will be printed to standard output, so you
-probably want to redirect the output to a new file (*NOT* the same
-file you used as input, because that will destroy the file!).
-For example:
-
-$0 /etc/oinkmaster.conf /etc/rules/ > oinkmaster.conf.new
-
-If oinkmaster.conf.new looks ok, simply rename it to /etc/oinkmaster.conf.
-
-RTFM
-
-
-# Regexp to match the start of a multi-line rule.
-# %ACTIONS% will be replaced with content of $config{actions} later.
-my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.*\\\\\s*\n$'; # ';
-
-# Regexp to match a single-line rule.
-my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.+;\s*\)\s*$'; # ';
-
-
-my $config = shift || die($USAGE);
-
-my @rulesdirs = @ARGV;
-die($USAGE) unless ($#rulesdirs > -1);
-
-my $verbose = 1;
-my (%sidmsgmap, %config);
-
-$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic";
-
-$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-
-
-
-# Read in oinkmaster.conf.
-open(CONFIG, "<" , "$config") or die("could not open \"$config\" for reading: $!\n");
-my @config = <CONFIG>;
-close(CONFIG);
-
-
-# Read in *.rules in all rulesdirs and create %sidmsgmap ($sidmsgmap{sid} = msg).
-foreach my $rulesdir (@rulesdirs) {
- opendir(RULESDIR, "$rulesdir") or die("could not open \"$rulesdir\": $!\n");
-
- while (my $file = readdir(RULESDIR)) {
- next unless ($file =~ /\.rules$/);
-
- open(FILE, "<", "$rulesdir/$file") or die("could not open \"$rulesdir/$file\": $!\n");
- my @file = <FILE>;
- close(FILE);
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
- $sidmsgmap{$sid} = $msg
- if (defined($single));
- }
- }
-}
-
-
-# Print new oinkmaster.conf.
-while ($_ = shift(@config)) {
- if (/^\s*(?:disable|enable|local)sid\s+(\d+)\s*$/ || /^\s*(\d+)\s*,\s*\\$/ || /^\s*(\d+)\s*$/) {
- my $sid = $1;
- my $is_multiline = 0;
- chomp;
-
- if (/\\$/) {
- $is_multiline = 1;
- s/\\$//;
- }
-
- $_ = sprintf("%-25s", $_);
- if (exists($sidmsgmap{$sid})) {
- print "$_ # $sidmsgmap{$sid}";
- } else {
- print "$_";
- }
- print " \\" if ($is_multiline);
- print "\n";
- } else {
- print;
- }
-}
-
-
-
-# From oinkmaster.pl.
-sub get_next_entry($ $ $ $ $ $)
-{
- my $arr_ref = shift;
- my $single_ref = shift;
- my $multi_ref = shift;
- my $nonrule_ref = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- undef($$single_ref);
- undef($$multi_ref);
- undef($$nonrule_ref);
- undef($$msg_ref);
- undef($$sid_ref);
-
- my $line = shift(@$arr_ref) || return(0);
- my $disabled = 0;
- my $broken = 0;
-
- # Possible beginning of multi-line rule?
- if ($line =~ /$MULTILINE_RULE_REGEXP/oi) {
- $$single_ref = $line;
- $$multi_ref = $line;
-
- $disabled = 1 if ($line =~ /^\s*#/);
-
- # Keep on reading as long as line ends with "\".
- while (!$broken && $line =~ /\\\s*\n$/) {
-
- # Remove trailing "\" and newline for single-line version.
- $$single_ref =~ s/\\\s*\n//;
-
- # If there are no more lines, this can not be a valid multi-line rule.
- if (!($line = shift(@$arr_ref))) {
-
- warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n")
- if ($config{verbose});
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
-
- # Multi-line continuation.
- $$multi_ref .= $line;
-
- # If there are non-comment lines in the middle of a disabled rule,
- # mark the rule as broken to return as non-rule lines.
- if ($line !~ /^\s*#/ && $disabled) {
- $broken = 1;
- } elsif ($line =~ /^\s*#/ && !$disabled) {
- # comment line (with trailing slash) in the middle of an active rule - ignore it
- } else {
- $line =~ s/^\s*#*\s*//; # remove leading # in single-line version
- $$single_ref .= $line;
- }
-
- } # while line ends with "\"
-
- # Single-line version should now be a valid rule.
- # If not, it wasn't a valid multi-line rule after all.
- if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) {
-
- $$single_ref =~ s/^\s*//; # remove leading whitespaces
- $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading #
- $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- $$multi_ref =~ s/^\s*//;
- $$multi_ref =~ s/\s*\n$/\n/;
- $$multi_ref =~ s/^#+\s*/#/;
-
- return (1); # return multi
- } else {
- warn("\nWARNING: invalid multi-line rule: $$single_ref\n")
- if ($config{verbose} && $$multi_ref !~ /^\s*#/);
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
- } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) {
- $$single_ref = $line;
- $$single_ref =~ s/^\s*//;
- $$single_ref =~ s/^#+\s*/#/;
- $$single_ref =~ s/\s*\n$/\n/;
-
- return (1); # return single
- } else { # non-rule line
-
- # Do extra check and warn if it *might* be a rule anyway,
- # but that we just couldn't parse for some reason.
- warn("\nWARNING: line may be a rule but it could not be parsed ".
- "(missing sid or msg?): $line\n")
- if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/);
-
- $$nonrule_ref = $line;
- $$nonrule_ref =~ s/\s*\n$/\n/;
-
- return (1); # return non-rule
- }
-}
-
-
-
-# From oinkmaster.pl.
-sub parse_singleline_rule($ $ $)
-{
- my $line = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) {
-
- if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) {
- $$msg_ref = $1;
- } else {
- return (0);
- }
-
- if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) {
- $$sid_ref = $1;
- } else {
- return (0);
- }
-
- return (1);
- }
-
- return (0);
-}
diff --git a/config/snort/bin/oinkmaster_contrib/addsid.pl b/config/snort/bin/oinkmaster_contrib/addsid.pl
deleted file mode 100644
index 64255d22..00000000
--- a/config/snort/bin/oinkmaster_contrib/addsid.pl
+++ /dev/null
@@ -1,382 +0,0 @@
-#!/usr/bin/perl -w
-
-# $Id: addsid.pl,v 1.30 2005/12/31 13:42:46 andreas_o Exp $ #
-
-# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or
-# without modification, are permitted provided that the following
-# conditions are met:
-#
-# 1. Redistributions of source code must retain the above
-# copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials
-# provided with the distribution.
-#
-# 3. Neither the name of the author nor the names of its
-# contributors may be used to endorse or promote products
-# derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-use strict;
-
-
-sub get_next_entry($ $ $ $ $ $);
-sub parse_singleline_rule($ $ $);
-sub get_next_available_sid(@);
-
-
-# Set this to the default classtype you want to add, if missing.
-# Set to 0 or "" if you don't want to add a classtype.
-my $CLASSTYPE = "misc-attack";
-
-# If ADD_REV is set to 1, "rev: 1;" will be added to rule if it has no rev.
-# Set to 0 if you don't want to add it.
-my $ADD_REV = 1;
-
-# Minimum SID to add. Normally, the next available SID will be used,
-# unless it's below this value. Only SIDs >= 1000000 are reserved for
-# personal use.
-my $MIN_SID = 1000001;
-
-# Regexp to match the start of a multi-line rule.
-# %ACTIONS% will be replaced with content of $config{actions} later.
-my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.*\\\\\s*\n$'; # ';
-
-# Regexp to match a single-line rule.
-my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.+;\s*\)\s*$'; # ';
-
-
-my $USAGE = << "RTFM";
-
-Parse *.rules in one or more directories and add "sid:<sid>;" to
-active rules that don't have any "sid" entry, starting with the next
-available SID after parsing all rules files (but $MIN_SID at minumum).
-Also, "rev:1;" is added to rules without a "rev" entry, and
-"classtype:misc-attack;" is added to rules without a "classtype" entry
-(edit options at the top of $0 if you want to change this).
-
-Usage: $0 <rulesdir> [rulesdir2, ...]
-
-RTFM
-
-
-# Start in verbose mode.
-my $verbose = 1;
-
-my (%all_sids, %active_sids, %config);
-
-my @rulesdirs = @ARGV;
-
-die($USAGE) unless ($#rulesdirs > -1);
-
-$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic";
-
-$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-
-
-# Find out the next available SID.
-my $next_sid = get_next_available_sid(@rulesdirs);
-
-# Avoid seeing possible warnings about broken rules twice.
-$verbose = 0;
-
-# Add sid/rev/classtype to active rules that don't have any.
-foreach my $dir (@rulesdirs) {
- opendir(RULESDIR, "$dir") or die("could not open \"$dir\": $!\n");
-
- while (my $file = readdir(RULESDIR)) {
- next unless ($file =~ /\.rules$/);
-
- open(OLDFILE, "$dir/$file")
- or die("could not open \"$dir/$file\": $!\n");
- my @file = <OLDFILE>;
- close(OLDFILE);
-
- open(NEWFILE, ">", "$dir/$file")
- or die("could not open \"$dir/$file\" for writing: $!\n");
-
- my ($single, $multi, $nonrule, $msg, $sid);
- while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
-
- if (defined($nonrule)) {
- print NEWFILE "$nonrule";
- next;
- }
-
- $multi = $single unless (defined($multi));
-
- # Don't care about inactive rules.
- if ($single =~ /^\s*#/) {
- print NEWFILE "$multi";
- next;
- }
-
- my $added;
-
- # Add SID.
- if ($single !~ /sid\s*:\s*\d+\s*;/) {
- $added .= "SID $next_sid,";
- $multi =~ s/\)\s*\n/sid:$next_sid;)\n/;
- $next_sid++;
- }
-
- # Add revision.
- if ($ADD_REV && $single !~ /rev\s*:\s*\d+\s*;/) {
- $added .= "rev,";
- $multi =~ s/\)\s*\n/rev:1;)\n/;
- }
-
- # Add classtype.
- if ($CLASSTYPE && $single !~ /classtype\s*:\s*.+\s*;/) {
- $added .= "classtype $CLASSTYPE,";
- $multi =~ s/\)\s*\n/classtype:$CLASSTYPE;)\n/;
- }
-
- if (defined($added)) {
- $added =~ s/,$//;
- print "Adding $added to rule \"$msg\"\n"
- if (defined($added));
- }
-
- print NEWFILE "$multi";
- }
-
- close(NEWFILE);
- }
-
- closedir(RULESDIR);
-}
-
-
-
-# Read in *.rules in given directory and return highest SID.
-sub get_next_available_sid(@)
-{
- my @dirs = @_;
-
- foreach my $dir (@dirs) {
- opendir(RULESDIR, "$dir") or die("could not open \"$dir\": $!\n");
-
- # Only care about *.rules.
- while (my $file = readdir(RULESDIR)) {
- next unless ($file =~ /\.rules$/);
-
- open(OLDFILE, "<$dir/$file") or die("could not open \"$dir/$file\": $!\n");
- my @file = <OLDFILE>;
- close(OLDFILE);
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
- if (defined($single) && defined($sid)) {
- $all_sids{$sid}++;
-
- # If this is an active rule add to %active_sids and
- # warn if it already exists.
- if ($single =~ /^\s*alert/) {
- print STDERR "WARNING: duplicate SID: $sid\n"
- if (exists($active_sids{$sid}));
- $active_sids{$sid}++
- }
- }
- }
- }
- }
-
- # Sort sids and use highest one + 1, unless it's below MIN_SID.
- @_ = sort {$a <=> $b} keys(%all_sids);
- my $sid = pop(@_);
-
- if (!defined($sid)) {
- $sid = $MIN_SID
- } else {
- $sid++;
- }
-
- # If it's below MIN_SID, use MIN_SID instead.
- $sid = $MIN_SID if ($sid < $MIN_SID);
-
- return ($sid)
-}
-
-
-
-sub get_next_entry($ $ $ $ $ $)
-{
- my $arr_ref = shift;
- my $single_ref = shift;
- my $multi_ref = shift;
- my $nonrule_ref = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- undef($$single_ref);
- undef($$multi_ref);
- undef($$nonrule_ref);
- undef($$msg_ref);
- undef($$sid_ref);
-
- my $line = shift(@$arr_ref) || return(0);
- my $disabled = 0;
- my $broken = 0;
-
- # Possible beginning of multi-line rule?
- if ($line =~ /$MULTILINE_RULE_REGEXP/oi) {
- $$single_ref = $line;
- $$multi_ref = $line;
-
- $disabled = 1 if ($line =~ /^\s*#/);
-
- # Keep on reading as long as line ends with "\".
- while (!$broken && $line =~ /\\\s*\n$/) {
-
- # Remove trailing "\" and newline for single-line version.
- $$single_ref =~ s/\\\s*\n//;
-
- # If there are no more lines, this can not be a valid multi-line rule.
- if (!($line = shift(@$arr_ref))) {
-
- warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n")
- if ($config{verbose});
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
-
- # Multi-line continuation.
- $$multi_ref .= $line;
-
- # If there are non-comment lines in the middle of a disabled rule,
- # mark the rule as broken to return as non-rule lines.
- if ($line !~ /^\s*#/ && $disabled) {
- $broken = 1;
- } elsif ($line =~ /^\s*#/ && !$disabled) {
- # comment line (with trailing slash) in the middle of an active rule - ignore it
- } else {
- $line =~ s/^\s*#*\s*//; # remove leading # in single-line version
- $$single_ref .= $line;
- }
-
- } # while line ends with "\"
-
- # Single-line version should now be a valid rule.
- # If not, it wasn't a valid multi-line rule after all.
- if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) {
-
- $$single_ref =~ s/^\s*//; # remove leading whitespaces
- $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading #
- $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- $$multi_ref =~ s/^\s*//;
- $$multi_ref =~ s/\s*\n$/\n/;
- $$multi_ref =~ s/^#+\s*/#/;
-
- return (1); # return multi
- } else {
- warn("\nWARNING: invalid multi-line rule: $$single_ref\n")
- if ($config{verbose} && $$multi_ref !~ /^\s*#/);
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
- } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) {
- $$single_ref = $line;
- $$single_ref =~ s/^\s*//;
- $$single_ref =~ s/^#+\s*/#/;
- $$single_ref =~ s/\s*\n$/\n/;
-
- return (1); # return single
- } else { # non-rule line
-
- # Do extra check and warn if it *might* be a rule anyway,
- # but that we just couldn't parse for some reason.
- warn("\nWARNING: line may be a rule but it could not be parsed ".
- "(missing sid or msg?): $line\n")
- if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/);
-
- $$nonrule_ref = $line;
- $$nonrule_ref =~ s/\s*\n$/\n/;
-
- return (1); # return non-rule
- }
-}
-
-
-
-# From oinkmaster.pl except that this version
-# has been modified so that the sid is *optional*.
-sub parse_singleline_rule($ $ $)
-{
- my $line = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) {
-
- if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) {
- $$msg_ref = $1;
- } else {
- return (0);
- }
-
- if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) {
- $$sid_ref = $1;
-# } else {
-# return (0);
- }
-
- return (1);
- }
-
- return (0);
-}
diff --git a/config/snort/bin/oinkmaster_contrib/make_snortsam_map.pl b/config/snort/bin/oinkmaster_contrib/make_snortsam_map.pl
deleted file mode 100644
index 42ce2b3b..00000000
--- a/config/snort/bin/oinkmaster_contrib/make_snortsam_map.pl
+++ /dev/null
@@ -1,265 +0,0 @@
-#!/usr/bin/perl -w
-
-# $Id: makesidex.pl,v 1.11 2005/12/31 13:42:46 andreas_o Exp $ #
-
-# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or
-# without modification, are permitted provided that the following
-# conditions are met:
-#
-# 1. Redistributions of source code must retain the above
-# copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials
-# provided with the distribution.
-#
-# 3. Neither the name of the author nor the names of its
-# contributors may be used to endorse or promote products
-# derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Modified by Robert Zelaya for the snort package.
-# gets enabled sids and msgs for all rules in a dir
-
-
-
-use strict;
-
-sub get_next_entry($ $ $ $ $ $);
-sub parse_singleline_rule($ $ $);
-
-
-# Regexp to match the start of a multi-line rule.
-# %ACTIONS% will be replaced with content of $config{actions} later.
-my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.*\\\\\s*\n$'; # ';
-
-# Regexp to match a single-line rule.
-my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.+;\s*\)\s*$'; # ';
-
-my $USAGE = << "RTFM";
-
-Parse *.rules in one or more directories and look for all rules that are
-disabled (i.e. begin with "#") and print "disablesid <sid> # <msg>" to
-standard output for all those rules. This output can be redirected to a
-file, which will be understood by Oinkmaster.
-
-Usage: $0 <rulesdir> [rulesdir2, ...]
-
-RTFM
-
-my $verbose = 1;
-
-my (%disabled, %config);
-
-my @rulesdirs = @ARGV;
-
-die($USAGE) unless ($#rulesdirs > -1);
-
-$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic";
-
-$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-
-foreach my $rulesdir (@rulesdirs) {
- opendir(RULESDIR, "$rulesdir") or die("could not open \"$rulesdir\": $!\n");
-
- while (my $file = readdir(RULESDIR)) {
- next unless ($file =~ /\.rules$/);
-
- open(FILE, "$rulesdir/$file") or die("could not open \"$rulesdir/$file\": $!\n");
- my @file = <FILE>;
- close(FILE);
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
- $single = $multi if (defined($multi));
- $disabled{$sid} = $msg
- if (defined($single) && $single =~ /^alert/);
- }
- }
-}
-
-# Print results.
-foreach my $sid (sort { $a <=> $b } keys(%disabled)) {
- printf("%-25s # %s\n", "$sid", $disabled{$sid});
-}
-
-
-
-# Same as in oinkmaster.pl.
-sub get_next_entry($ $ $ $ $ $)
-{
- my $arr_ref = shift;
- my $single_ref = shift;
- my $multi_ref = shift;
- my $nonrule_ref = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- undef($$single_ref);
- undef($$multi_ref);
- undef($$nonrule_ref);
- undef($$msg_ref);
- undef($$sid_ref);
-
- my $line = shift(@$arr_ref) || return(0);
- my $disabled = 0;
- my $broken = 0;
-
- # Possible beginning of multi-line rule?
- if ($line =~ /$MULTILINE_RULE_REGEXP/oi) {
- $$single_ref = $line;
- $$multi_ref = $line;
-
- $disabled = 1 if ($line =~ /^alert/);
-
- # Keep on reading as long as line ends with "\".
- while (!$broken && $line =~ /\\\s*\n$/) {
-
- # Remove trailing "\" and newline for single-line version.
- $$single_ref =~ s/\\\s*\n//;
-
- # If there are no more lines, this can not be a valid multi-line rule.
- if (!($line = shift(@$arr_ref))) {
-
- warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n")
- if ($config{verbose});
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
-
- # Multi-line continuation.
- $$multi_ref .= $line;
-
- # If there are non-comment lines in the middle of a disabled rule,
- # mark the rule as broken to return as non-rule lines.
- if ($line !~ /^alert/ && $disabled) {
- $broken = 1;
- } elsif ($line =~ /^alert/ && !$disabled) {
- # comment line (with trailing slash) in the middle of an active rule - ignore it
- } else {
- $line =~ s/^\s*alert*\s*/alert/; # remove leading # in single-line version
- $$single_ref .= $line;
- }
-
- } # while line ends with "\"
-
- # Single-line version should now be a valid rule.
- # If not, it wasn't a valid multi-line rule after all.
- if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) {
-
- $$single_ref =~ s/^\s*//; # remove leading whitespaces
- $$single_ref =~ s/^alert+\s*/#/; # remove whitespaces next to leading #
- $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- $$multi_ref =~ s/^\s*//;
- $$multi_ref =~ s/\s*\n$/\n/;
- $$multi_ref =~ s/^alert+\s*/alert/;
-
- return (1); # return multi
- } else {
- warn("\nWARNING: invalid multi-line rule: $$single_ref\n")
- if ($config{verbose} && $$multi_ref !~ /^alert/);
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
- } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) {
- $$single_ref = $line;
- $$single_ref =~ s/^\s*//;
- $$single_ref =~ s/^alert+\s*/alert/;
- $$single_ref =~ s/\s*\n$/\n/;
-
- return (1); # return single
- } else { # non-rule line
-
- # Do extra check and warn if it *might* be a rule anyway,
- # but that we just couldn't parse for some reason.
- warn("\nWARNING: line may be a rule but it could not be parsed ".
- "(missing sid or msg?): $line\n")
- if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/);
-
- $$nonrule_ref = $line;
- $$nonrule_ref =~ s/\s*\n$/\n/;
-
- return (1); # return non-rule
- }
-}
-
-
-
-# Same as in oinkmaster.pl.
-sub parse_singleline_rule($ $ $)
-{
- my $line = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) {
-
- if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) {
- $$msg_ref = $1;
- } else {
- return (0);
- }
-
- if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) {
- $$sid_ref = $1;
- } else {
- return (0);
- }
-
- return (1);
- }
-
- return (0);
-}
diff --git a/config/snort/bin/oinkmaster_contrib/makesidex.pl b/config/snort/bin/oinkmaster_contrib/makesidex.pl
deleted file mode 100644
index 80354735..00000000
--- a/config/snort/bin/oinkmaster_contrib/makesidex.pl
+++ /dev/null
@@ -1,261 +0,0 @@
-#!/usr/bin/perl -w
-
-# $Id: makesidex.pl,v 1.11 2005/12/31 13:42:46 andreas_o Exp $ #
-
-# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or
-# without modification, are permitted provided that the following
-# conditions are met:
-#
-# 1. Redistributions of source code must retain the above
-# copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials
-# provided with the distribution.
-#
-# 3. Neither the name of the author nor the names of its
-# contributors may be used to endorse or promote products
-# derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-use strict;
-
-sub get_next_entry($ $ $ $ $ $);
-sub parse_singleline_rule($ $ $);
-
-
-# Regexp to match the start of a multi-line rule.
-# %ACTIONS% will be replaced with content of $config{actions} later.
-my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.*\\\\\s*\n$'; # ';
-
-# Regexp to match a single-line rule.
-my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.+;\s*\)\s*$'; # ';
-
-my $USAGE = << "RTFM";
-
-Parse *.rules in one or more directories and look for all rules that are
-disabled (i.e. begin with "#") and print "disablesid <sid> # <msg>" to
-standard output for all those rules. This output can be redirected to a
-file, which will be understood by Oinkmaster.
-
-Usage: $0 <rulesdir> [rulesdir2, ...]
-
-RTFM
-
-my $verbose = 1;
-
-my (%disabled, %config);
-
-my @rulesdirs = @ARGV;
-
-die($USAGE) unless ($#rulesdirs > -1);
-
-$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic";
-
-$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-
-foreach my $rulesdir (@rulesdirs) {
- opendir(RULESDIR, "$rulesdir") or die("could not open \"$rulesdir\": $!\n");
-
- while (my $file = readdir(RULESDIR)) {
- next unless ($file =~ /\.rules$/);
-
- open(FILE, "$rulesdir/$file") or die("could not open \"$rulesdir/$file\": $!\n");
- my @file = <FILE>;
- close(FILE);
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
- $single = $multi if (defined($multi));
- $disabled{$sid} = $msg
- if (defined($single) && $single =~ /^\s*#/);
- }
- }
-}
-
-# Print results.
-foreach my $sid (sort { $a <=> $b } keys(%disabled)) {
- printf("%-25s # %s\n", "disablesid $sid", $disabled{$sid});
-}
-
-
-
-# Same as in oinkmaster.pl.
-sub get_next_entry($ $ $ $ $ $)
-{
- my $arr_ref = shift;
- my $single_ref = shift;
- my $multi_ref = shift;
- my $nonrule_ref = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- undef($$single_ref);
- undef($$multi_ref);
- undef($$nonrule_ref);
- undef($$msg_ref);
- undef($$sid_ref);
-
- my $line = shift(@$arr_ref) || return(0);
- my $disabled = 0;
- my $broken = 0;
-
- # Possible beginning of multi-line rule?
- if ($line =~ /$MULTILINE_RULE_REGEXP/oi) {
- $$single_ref = $line;
- $$multi_ref = $line;
-
- $disabled = 1 if ($line =~ /^\s*#/);
-
- # Keep on reading as long as line ends with "\".
- while (!$broken && $line =~ /\\\s*\n$/) {
-
- # Remove trailing "\" and newline for single-line version.
- $$single_ref =~ s/\\\s*\n//;
-
- # If there are no more lines, this can not be a valid multi-line rule.
- if (!($line = shift(@$arr_ref))) {
-
- warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n")
- if ($config{verbose});
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
-
- # Multi-line continuation.
- $$multi_ref .= $line;
-
- # If there are non-comment lines in the middle of a disabled rule,
- # mark the rule as broken to return as non-rule lines.
- if ($line !~ /^\s*#/ && $disabled) {
- $broken = 1;
- } elsif ($line =~ /^\s*#/ && !$disabled) {
- # comment line (with trailing slash) in the middle of an active rule - ignore it
- } else {
- $line =~ s/^\s*#*\s*//; # remove leading # in single-line version
- $$single_ref .= $line;
- }
-
- } # while line ends with "\"
-
- # Single-line version should now be a valid rule.
- # If not, it wasn't a valid multi-line rule after all.
- if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) {
-
- $$single_ref =~ s/^\s*//; # remove leading whitespaces
- $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading #
- $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- $$multi_ref =~ s/^\s*//;
- $$multi_ref =~ s/\s*\n$/\n/;
- $$multi_ref =~ s/^#+\s*/#/;
-
- return (1); # return multi
- } else {
- warn("\nWARNING: invalid multi-line rule: $$single_ref\n")
- if ($config{verbose} && $$multi_ref !~ /^\s*#/);
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
- } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) {
- $$single_ref = $line;
- $$single_ref =~ s/^\s*//;
- $$single_ref =~ s/^#+\s*/#/;
- $$single_ref =~ s/\s*\n$/\n/;
-
- return (1); # return single
- } else { # non-rule line
-
- # Do extra check and warn if it *might* be a rule anyway,
- # but that we just couldn't parse for some reason.
- warn("\nWARNING: line may be a rule but it could not be parsed ".
- "(missing sid or msg?): $line\n")
- if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/);
-
- $$nonrule_ref = $line;
- $$nonrule_ref =~ s/\s*\n$/\n/;
-
- return (1); # return non-rule
- }
-}
-
-
-
-# Same as in oinkmaster.pl.
-sub parse_singleline_rule($ $ $)
-{
- my $line = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) {
-
- if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) {
- $$msg_ref = $1;
- } else {
- return (0);
- }
-
- if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) {
- $$sid_ref = $1;
- } else {
- return (0);
- }
-
- return (1);
- }
-
- return (0);
-}
diff --git a/config/snort/bin/oinkmaster_contrib/oinkgui.pl b/config/snort/bin/oinkmaster_contrib/oinkgui.pl
deleted file mode 100644
index 4e96f7db..00000000
--- a/config/snort/bin/oinkmaster_contrib/oinkgui.pl
+++ /dev/null
@@ -1,1046 +0,0 @@
-#!/usr/bin/perl -w
-
-# $Id: oinkgui.pl,v 1.52 2005/12/31 13:42:46 andreas_o Exp $ #
-
-# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or
-# without modification, are permitted provided that the following
-# conditions are met:
-#
-# 1. Redistributions of source code must retain the above
-# copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials
-# provided with the distribution.
-#
-# 3. Neither the name of the author nor the names of its
-# contributors may be used to endorse or promote products
-# derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-use 5.006001;
-
-use strict;
-use File::Spec;
-use Tk;
-use Tk::Balloon;
-use Tk::BrowseEntry;
-use Tk::FileSelect;
-use Tk::NoteBook;
-use Tk::ROText;
-
-use constant CSIDL_DRIVES => 17;
-
-sub update_rules();
-sub clear_messages();
-sub create_cmdline($);
-sub fileDialog($ $ $ $);
-sub load_config();
-sub save_config();
-sub save_messages();
-sub update_file_label_color($ $ $);
-sub create_fileSelectFrame($ $ $ $ $ $);
-sub create_checkbutton($ $ $);
-sub create_radiobutton($ $ $);
-sub create_actionbutton($ $ $);
-sub execute_oinkmaster(@);
-sub logmsg($ $);
-
-
-my $version = 'Oinkmaster GUI v1.1';
-
-my @oinkmaster_conf = qw(
- /etc/oinkmaster.conf
- /usr/local/etc/oinkmaster.conf
-);
-
-# List of URLs that will show up in the URL BrowseEntry.
-my @urls = qw(
- http://www.bleedingsnort.com/bleeding.rules.tar.gz
- http://www.snort.org/pub-bin/downloads.cgi/Download/comm_rules/Community-Rules.tar.gz
- http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-CURRENT.tar.gz
- http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-2.3.tar.gz
-);
-
-my %color = (
- background => 'Bisque3',
- button => 'Bisque2',
- label => 'Bisque1',
- notebook_bg => 'Bisque2',
- notebook_inact => 'Bisque3',
- file_label_ok => '#00e000',
- file_label_not_ok => 'red',
- out_frame_fg => 'white',
- out_frame_bg => 'black',
- entry_bg => 'white',
- button_active => 'white',
- button_bg => 'Bisque4',
-);
-
-my %config = (
- animate => 1,
- careful => 0,
- enable_all => 0,
- check_removed => 0,
- output_mode => 'normal',
- diff_mode => 'detailed',
- perl => $^X,
- oinkmaster => "",
- oinkmaster_conf => "",
- outdir => "",
- url => "",
- varfile => "",
- backupdir => "",
- editor => "",
-);
-
-my %help = (
-
- # File locations.
- oinkscript => 'Location of the executable Oinkmaster script (oinkmaster.pl).',
- oinkconf => 'The Oinkmaster configuration file to use.',
- outdir => 'Where to put the new rules. This should be the directory where you '.
- 'store your current rules.',
-
- url => 'Alternate location of rules archive to download/copy. '.
- 'Leave empty to use the location set in oinkmaster.conf.',
- varfile => 'Variables that exist in downloaded snort.conf but not in '.
- 'this file will be added to it. Leave empty to skip.',
- backupdir => 'Directory to put tarball of old rules before overwriting them. '.
- 'Leave empty to skip backup.',
- editor => 'Full path to editor to execute when pressing the "edit" button '.
- '(wordpad is recommended on Windows). ',
-
- # Checkbuttons.
- careful => 'In careful mode, Oinkmaster will just check for changes, '.
- 'not update anything.',
- enable => 'Some rules may be commented out by default (for a reason!). '.
- 'This option will make Oinkmaster enable those.',
- removed => 'Check for rules files that exist in the output directory but not '.
- 'in the downloaded rules archive.',
-
- # Action buttons.
- clear => 'Clear current output messages.',
- save => 'Save current output messages to file.',
- exit => 'Exit the GUI.',
- update => 'Execute Oinkmaster to update the rules.',
- test => 'Test current Oinkmaster configuration. ' .
- 'If there are no fatal errors, you are ready to update the rules.',
- version => 'Request version information from Oinkmaster.',
-);
-
-
-my $gui_config_file = "";
-my $use_fileop = 0;
-
-
-#### MAIN ####
-
-select STDERR;
-$| = 1;
-select STDOUT;
-$| = 1;
-
-# Find out if can use Win32::FileOp.
-if ($^O eq 'MSWin32') {
- BEGIN { $^W = 0 }
- $use_fileop = 1 if (eval "require Win32::FileOp");
-}
-
-# Find out which oinkmaster.pl file to default to.
-foreach my $dir (File::Spec->path()) {
- my $file = "$dir/oinkmaster";
- if (-f "$file" && (-x "$file" || $^O eq 'MSWin32')) {
- $config{oinkmaster} = $file;
- last;
- } elsif (-f "$file.pl" && (-x "$file" || $^O eq 'MSWin32')) {
- $config{oinkmaster} = "$file.pl";
- last;
- }
-}
-
-# Find out which oinkmaster config file to default to.
-foreach my $file (@oinkmaster_conf) {
- if (-e "$file") {
- $config{oinkmaster_conf} = $file;
- last;
- }
-}
-
-# Find out where the GUI config file is (it's not required).
-if ($ENV{HOME}) {
- $gui_config_file = "$ENV{HOME}/.oinkguirc"
-} elsif ($ENV{HOMEDRIVE} && $ENV{HOMEPATH}) {
- $gui_config_file = "$ENV{HOMEDRIVE}$ENV{HOMEPATH}\\.oinkguirc";
-}
-
-
-# Create main window.
-my $main = MainWindow->new(
- -background => "$color{background}",
- -title => "$version",
-);
-
-
-# Create scrolled frame with output messages.
-my $out_frame = $main->Scrolled('ROText',
- -setgrid => 'true',
- -scrollbars => 'e',
- -background => $color{out_frame_bg},
- -foreground => $color{out_frame_fg},
-);
-
-
-my $help_label = $main->Label(
- -relief => 'groove',
- -background => "$color{label}",
-);
-
-my $balloon = $main->Balloon(
- -statusbar => $help_label,
-);
-
-
-# Create notebook.
-my $notebook = $main->NoteBook(
- -ipadx => 6,
- -ipady => 6,
- -background => $color{notebook_bg},
- -inactivebackground => $color{notebook_inact},
- -backpagecolor => $color{background},
-);
-
-
-# Create tab with required files/dirs.
-my $req_tab = $notebook->add("required",
- -label => "Required files and directories",
- -underline => 0,
-);
-
-$req_tab->configure(-bg => "$color{notebook_inact}");
-
-
-# Create frame with oinkmaster.pl location.
-my $filetypes = [
- ['Oinkmaster script', 'oinkmaster.pl'],
- ['All files', '*' ]
-];
-
-my $oinkscript_frame =
- create_fileSelectFrame($req_tab, "oinkmaster.pl", 'EXECFILE',
- \$config{oinkmaster}, 'NOEDIT', $filetypes);
-
-$balloon->attach($oinkscript_frame, -statusmsg => $help{oinkscript});
-
-
-# Create frame with oinkmaster.conf location.
-$filetypes = [
- ['configuration files', '.conf'],
- ['All files', '*' ]
-];
-
-my $oinkconf_frame =
- create_fileSelectFrame($req_tab, "oinkmaster.conf", 'ROFILE',
- \$config{oinkmaster_conf}, 'EDIT', $filetypes);
-
-$balloon->attach($oinkconf_frame, -statusmsg => $help{oinkconf});
-
-
-# Create frame with output directory.
-my $outdir_frame =
- create_fileSelectFrame($req_tab, "output directory", 'WRDIR',
- \$config{outdir}, 'NOEDIT', undef);
-
-$balloon->attach($outdir_frame, -statusmsg => $help{outdir});
-
-
-
-# Create tab with optional files/dirs.
-my $opt_tab = $notebook->add("optional",
- -label => "Optional files and directories",
- -underline => 0,
-);
-
-$opt_tab->configure(-bg => "$color{notebook_inact}");
-
-# Create frame with alternate URL location.
-$filetypes = [
- ['compressed tar files', '.tar.gz']
-];
-
-my $url_frame =
- create_fileSelectFrame($opt_tab, "Alternate URL", 'URL',
- \$config{url}, 'NOEDIT', $filetypes);
-
-$balloon->attach($url_frame, -statusmsg => $help{url});
-
-
-# Create frame with variable file.
-$filetypes = [
- ['Snort configuration files', ['.conf', '.config']],
- ['All files', '*' ]
-];
-
-my $varfile_frame =
- create_fileSelectFrame($opt_tab, "Variable file", 'WRFILE',
- \$config{varfile}, 'EDIT', $filetypes);
-
-$balloon->attach($varfile_frame, -statusmsg => $help{varfile});
-
-
-# Create frame with backup dir location.
-my $backupdir_frame =
- create_fileSelectFrame($opt_tab, "Backup directory", 'WRDIR',
- \$config{backupdir}, 'NOEDIT', undef);
-
-$balloon->attach($backupdir_frame, -statusmsg => $help{backupdir});
-
-
-# Create frame with editor location.
-$filetypes = [
- ['executable files', ['.exe']],
- ['All files', '*' ]
-];
-
-my $editor_frame =
- create_fileSelectFrame($opt_tab, "Editor", 'EXECFILE',
- \$config{editor}, 'NOEDIT', $filetypes);
-
-$balloon->attach($editor_frame, -statusmsg => $help{editor});
-
-
-
-$notebook->pack(
- -expand => 'no',
- -fill => 'x',
- -padx => '5',
- -pady => '5',
- -side => 'top'
-);
-
-
-# Create the frame to the left.
-my $left_frame = $main->Frame(
- -background => "$color{label}",
- -border => '2',
-)->pack(
- -side => 'left',
- -fill => 'y',
-);
-
-
-# Create "GUI settings" label.
-$left_frame->Label(
- -text => "GUI settings:",
- -background => "$color{label}",
-)->pack(
- -side => 'top',
- -fill => 'x',
-);
-
-
-create_actionbutton($left_frame, "Load saved settings", \&load_config);
-create_actionbutton($left_frame, "Save current settings", \&save_config);
-
-
-# Create "options" label at the top of the left frame.
-$left_frame->Label(
- -text => "Options:",
- -background => "$color{label}",
-)->pack(-side => 'top',
- -fill => 'x',
-);
-
-
-# Create checkbuttons in the left frame.
-$balloon->attach(
- create_checkbutton($left_frame, "Careful mode", \$config{careful}),
- -statusmsg => $help{careful}
-);
-
-$balloon->attach(
- create_checkbutton($left_frame, "Enable all", \$config{enable_all}),
- -statusmsg => $help{enable}
-);
-
-$balloon->attach(
- create_checkbutton($left_frame, "Check for removed files", \$config{check_removed}),
- -statusmsg => $help{removed}
-);
-
-
-# Create "mode" label.
-$left_frame->Label(
- -text => "Output mode:",
- -background => "$color{label}",
-)->pack(
- -side => 'top',
- -fill => 'x',
-);
-
-# Create mode radiobuttons in the left frame.
-create_radiobutton($left_frame, "super-quiet", \$config{output_mode});
-create_radiobutton($left_frame, "quiet", \$config{output_mode});
-create_radiobutton($left_frame, "normal", \$config{output_mode});
-create_radiobutton($left_frame, "verbose", \$config{output_mode});
-
-# Create "Diff mode" label.
-$left_frame->Label(
- -text => "Diff mode:",
- -background => "$color{label}",
-)->pack(
- -side => 'top',
- -fill => 'x',
-);
-
-create_radiobutton($left_frame, "detailed", \$config{diff_mode});
-create_radiobutton($left_frame, "summarized", \$config{diff_mode});
-create_radiobutton($left_frame, "remove common", \$config{diff_mode});
-
-
-# Create "activity messages" label.
-$main->Label(
- -text => "Output messages:",
- -width => '130',
- -background => "$color{label}",
-)->pack(
- -side => 'top',
- -fill => 'x',
-);
-
-
-
-# Pack output frame.
-$out_frame->pack(
- -expand => 'yes',
- -fill => 'both',
-);
-
-
-# Pack help label below output window.
-$help_label->pack(
- -fill => 'x',
-);
-
-
-# Create "actions" label.
-$left_frame->Label(
- -text => "Actions:",
- -background => "$color{label}",
-)->pack(
- -side => 'top',
- -fill => 'x',
-);
-
-
-# Create action buttons.
-
-$balloon->attach(
- create_actionbutton($left_frame, "Update rules!", \&update_rules),
- -statusmsg => $help{update}
-);
-
-$balloon->attach(
- create_actionbutton($left_frame, "Clear output messages", \&clear_messages),
- -statusmsg => $help{clear}
-);
-
-$balloon->attach(
- create_actionbutton($left_frame, "Save output messages", \&save_messages),
- -statusmsg => $help{save}
-);
-
-$balloon->attach(
- create_actionbutton($left_frame, "Exit", \&exit),
- -statusmsg => $help{exit}
-);
-
-
-
-# Make the mousewheel scroll the output window. Taken from Mastering Perl/Tk.
-if ($^O eq 'MSWin32') {
- $out_frame->bind('<MouseWheel>' =>
- [ sub { $_[0]->yview('scroll', -($_[1] / 120) * 3, 'units')},
- Ev('D') ]
- );
-} else {
- $out_frame->bind('<4>' => sub {
- $_[0]->yview('scroll', -3, 'units') unless $Tk::strictMotif;
- });
-
- $out_frame->bind('<5>' => sub {
- $_[0]->yview('scroll', +3, 'units') unless $Tk::strictMotif;
- });
-}
-
-
-
-# Now the fun begins.
-if ($config{animate}) {
- foreach (split(//, "Welcome to $version")) {
- logmsg("$_", 'MISC');
- $out_frame->after(5);
- }
-} else {
- logmsg("Welcome to $version", 'MISC');
-}
-
-logmsg("\n\n", 'MISC');
-
-# Load gui settings into %config.
-load_config();
-
-
-# Warn if any required file/directory is not set.
-logmsg("No oinkmaster.pl set, please select one above!\n\n", 'ERROR')
- if ($config{oinkmaster} !~ /\S/);
-
-logmsg("No oinkmaster configuration file set, please select one above!\n\n", 'ERROR')
- if ($config{oinkmaster_conf} !~ /\S/);
-
-logmsg("Output directory is not set, please select one above!\n\n", 'ERROR')
- if ($config{outdir} !~ /\S/);
-
-
-MainLoop;
-
-
-
-#### END ####
-
-
-
-sub fileDialog($ $ $ $)
-{
- my $var_ref = shift;
- my $title = shift;
- my $type = shift;
- my $filetypes = shift;
- my $dirname;
-
- if ($type eq 'WRDIR') {
- if ($use_fileop) {
- $dirname = Win32::FileOp::BrowseForFolder("title", CSIDL_DRIVES);
- } else {
- my $fs = $main->FileSelect();
- $fs->configure(-verify => ['-d', '-w'], -title => $title);
- $dirname = $fs->Show;
- }
- $$var_ref = $dirname if ($dirname);
- } elsif ($type eq 'EXECFILE' || $type eq 'ROFILE' || $type eq 'WRFILE' || $type eq 'URL') {
- my $filename = $main->getOpenFile(-title => $title, -filetypes => $filetypes);
- $$var_ref = $filename if ($filename);
- } elsif ($type eq 'SAVEFILE') {
- my $filename = $main->getSaveFile(-title => $title, -filetypes => $filetypes);
- $$var_ref = $filename if ($filename);
- } else {
- logmsg("Unknown type ($type)\n", 'ERROR');
- }
-}
-
-
-
-sub update_file_label_color($ $ $)
-{
- my $label = shift;
- my $filename = shift;
- my $type = shift;
-
- $filename =~ s/^\s+//;
- $filename =~ s/\s+$//;
-
- unless ($filename) {
- $label->configure(-background => $color{file_label_not_ok});
- return (1);
- }
-
- if ($type eq "URL") {
- if ($filename =~ /^(?:http|ftp|scp):\/\/.+\.tar\.gz$/) {
- $label->configure(-background => $color{file_label_ok});
- } elsif ($filename =~ /^(?:file:\/\/)*(.+\.tar\.gz)$/) {
- my $file = $1;
- if (-f "$file" && -r "$file") {
- $label->configure(-background => $color{file_label_ok});
- } else {
- $label->configure(-background => $color{file_label_not_ok});
- }
- } else {
- $label->configure(-background => $color{file_label_not_ok});
- }
- } elsif ($type eq "ROFILE") {
- if (-f "$filename" && -r "$filename") {
- $label->configure(-background => $color{file_label_ok});
- } else {
- $label->configure(-background => $color{file_label_not_ok});
- }
- } elsif ($type eq "EXECFILE") {
- if (-f "$filename" && (-x "$filename" || $^O eq 'MSWin32')) {
- $label->configure(-background => $color{file_label_ok});
- } else {
- $label->configure(-background => $color{file_label_not_ok});
- }
- } elsif ($type eq "WRFILE") {
- if (-f "$filename" && -w "$filename") {
- $label->configure(-background => $color{file_label_ok});
- } else {
- $label->configure(-background => $color{file_label_not_ok});
- }
- } elsif ($type eq "WRDIR") {
- if (-d "$filename" && -w "$filename") {
- $label->configure(-background => $color{file_label_ok});
- } else {
- $label->configure(-background => $color{file_label_not_ok});
- }
- } else {
- print STDERR "incorrect type ($type)\n";
- exit;
- }
-
- return (1);
-}
-
-
-
-sub create_checkbutton($ $ $)
-{
- my $frame = shift;
- my $name = shift;
- my $var_ref = shift;
-
- my $button = $frame->Checkbutton(
- -text => $name,
- -background => $color{button},
- -activebackground => $color{button_active},
- -highlightbackground => $color{button_bg},
- -variable => $var_ref,
- -relief => 'raise',
- -anchor => 'w',
- )->pack(
- -fill => 'x',
- -side => 'top',
- -pady => '1',
- );
-
- return ($button);
-}
-
-
-
-sub create_actionbutton($ $ $)
-{
- my $frame = shift;
- my $name = shift;
- my $func_ref = shift;
-
- my $button = $frame->Button(
- -text => $name,
- -command => sub {
- &$func_ref;
- $out_frame->focus;
- },
- -background => $color{button},
- -activebackground => $color{button_active},
- -highlightbackground => $color{button_bg},
- )->pack(
- -fill => 'x',
- );
-
- return ($button);
-}
-
-
-
-sub create_radiobutton($ $ $)
-{
- my $frame = shift;
- my $name = shift;
- my $mode_ref = shift;
-
- my $button = $frame->Radiobutton(
- -text => $name,
- -highlightbackground => $color{button_bg},
- -background => $color{button},
- -activebackground => $color{button_active},
- -variable => $mode_ref,
- -relief => 'raised',
- -anchor => 'w',
- -value => $name,
- )->pack(
- -side => 'top',
- -pady => '1',
- -fill => 'x',
- );
-
- return ($button);
-}
-
-
-
-# Create <label><entry><browsebutton> in given frame.
-sub create_fileSelectFrame($ $ $ $ $ $)
-{
- my $win = shift;
- my $name = shift;
- my $type = shift; # FILE|DIR|URL
- my $var_ref = shift;
- my $edtype = shift; # EDIT|NOEDIT
- my $filetypes = shift;
-
- # Create frame.
- my $frame = $win->Frame(
- -bg => $color{background},
- )->pack(
- -padx => '2',
- -pady => '2',
- -fill => 'x'
- );
-
- # Create label.
- my $label = $frame->Label(
- -text => $name,
- -width => '16',
- -relief => 'raised',
- -background => "$color{file_label_not_ok}",
- )->pack(
- -side => 'left'
- );
-
- my $entry;
-
- if ($type eq 'URL') {
- $entry = $frame->BrowseEntry(
- -textvariable => $var_ref,
- -background => $color{entry_bg},
- -width => '80',
- -choices => \@urls,
- -validate => 'key',
- -validatecommand => sub { update_file_label_color($label, $_[0], $type) },
- )->pack(
- -side => 'left',
- -expand => 'yes',
- -fill => 'x'
- );
- } else {
- $entry = $frame->Entry(
- -textvariable => $var_ref,
- -background => $color{entry_bg},
- -width => '80',
- -validate => 'key',
- -validatecommand => sub { update_file_label_color($label, $_[0], $type) },
- )->pack(
- -side => 'left',
- -expand => 'yes',
- -fill => 'x'
- );
- }
-
- # Create edit-button if file is ediable.
- if ($edtype eq 'EDIT') {
- my $edit_but = $frame->Button(
- -text => "Edit",
- -background => "$color{button}",
- -command => sub {
- unless (-e "$$var_ref") {
- logmsg("Select an existing file first!\n\n", 'ERROR');
- return;
- }
-
- if ($config{editor}) {
- $main->Busy(-recurse => 1);
- logmsg("Launching " . $config{editor} .
- ", close it to continue the GUI.\n\n", 'MISC');
- sleep(2);
- system($config{editor}, $$var_ref); # MainLoop will be put on hold...
- $main->Unbusy;
- } else {
- logmsg("No editor set\n\n", 'ERROR');
- }
- }
- )->pack(
- -side => 'left',
- );
- }
-
- # Create browse-button.
- my $but = $frame->Button(
- -text => "browse ...",
- -background => $color{button},
- -command => sub {
- fileDialog($var_ref, $name, $type, $filetypes);
- }
- )->pack(
- -side => 'left',
- );
-
- return ($frame);
-}
-
-
-
-sub logmsg($ $)
-{
- my $text = shift;
- my $type = shift;
-
- return unless (defined($text));
-
- $out_frame->tag(qw(configure OUTPUT -foreground grey));
- $out_frame->tag(qw(configure ERROR -foreground red));
- $out_frame->tag(qw(configure MISC -foreground white));
- $out_frame->tag(qw(configure EXEC -foreground bisque2));
-
- $out_frame->insert('end', "$text", "$type");
- $out_frame->see('end');
- $out_frame->update;
-}
-
-
-
-
-sub execute_oinkmaster(@)
-{
- my @cmd = @_;
- my @obfuscated_cmd;
-
- # Obfuscate possible password in url.
- foreach my $line (@cmd) {
- if ($line =~ /^(\S+:\/\/.+?):.+?@(.+)/) {
- push(@obfuscated_cmd, "$1:*password*\@$2");
- } else {
- push(@obfuscated_cmd, $line);
- }
- }
-
- logmsg("@obfuscated_cmd:\n", 'EXEC');
-
- $main->Busy(-recurse => 1);
-
- if ($^O eq 'MSWin32') {
- open(OINK, "@cmd 2>&1|");
- while (<OINK>) {
- logmsg($_, 'OUTPUT');
- }
- close(OINK);
- } else {
- if (open(OINK,"-|")) {
- while (<OINK>) {
- logmsg($_, 'OUTPUT');
- }
- } else {
- open(STDERR, '>&STDOUT');
- exec(@cmd);
- }
- close(OINK);
- }
-
- $main->Unbusy;
- logmsg("done.\n\n", 'EXEC');
-}
-
-
-
-sub clear_messages()
-{
- $out_frame->delete('1.0','end');
- $out_frame->update;
-}
-
-
-
-sub save_messages()
-{
- my $text = $out_frame->get('1.0', 'end');
- my $title = 'Save output messages';
- my $filename;
-
- my $filetypes = [
- ['Log files', ['.log', '.txt']],
- ['All files', '*' ]
- ];
-
-
- if (length($text) > 1) {
- fileDialog(\$filename, $title, 'SAVEFILE', $filetypes);
- if (defined($filename)) {
-
- unless (open(LOG, ">", "$filename")) {
- logmsg("Could not open $filename for writing: $!\n\n", 'ERROR');
- return;
- }
-
- print LOG $text;
- close(LOG);
- logmsg("Successfully saved output messages to $filename\n\n", 'MISC');
- }
-
- } else {
- logmsg("Nothing to save.\n\n", 'ERROR');
- }
-}
-
-
-
-sub update_rules()
-{
- my @cmd;
-
- create_cmdline(\@cmd) || return;
- clear_messages();
- execute_oinkmaster(@cmd);
-}
-
-
-
-sub create_cmdline($)
-{
- my $cmd_ref = shift;
-
- my $oinkmaster = $config{oinkmaster};
- my $oinkmaster_conf = $config{oinkmaster_conf};
- my $outdir = $config{outdir};
- my $varfile = $config{varfile};
- my $url = $config{url};
- my $backupdir = $config{backupdir};
-
- # Assume file:// if url prefix is missing.
- if ($url) {
- $url = "file://$url" unless ($url =~ /(?:http|ftp|file|scp):\/\//);
- if ($url =~ /.+<oinkcode>.+/) {
- logmsg("You must replace <oinkcode> with your real oinkcode, see the FAQ!\n\n", 'ERROR');
- return (0);
- }
- }
-
- $oinkmaster = File::Spec->rel2abs($oinkmaster)
- if ($oinkmaster);
-
- $outdir = File::Spec->canonpath("$outdir");
- $backupdir = File::Spec->canonpath("$backupdir");
-
- # Clean leading/trailing whitespaces.
- foreach my $var_ref (\$oinkmaster, \$oinkmaster_conf, \$outdir,
- \$varfile, \$url, \$backupdir) {
- $$var_ref =~ s/^\s+//;
- $$var_ref =~ s/\s+$//;
- }
-
- unless ($config{oinkmaster} && -f "$config{oinkmaster}" &&
- (-x "$config{oinkmaster}" || $^O eq 'MSWin32')) {
- logmsg("Location of oinkmaster.pl is not set correctly!\n\n", 'ERROR');
- return;
- }
-
- unless ($oinkmaster_conf && -f "$oinkmaster_conf") {
- logmsg("Location of configuration file is not set correctlyy!\n\n", 'ERROR');
- return (0);
- }
-
- unless ($outdir && -d "$outdir") {
- logmsg("Output directory is not set correctly!\n\n", 'ERROR');
- return (0);
- }
-
- # Add leading/trailing "" if win32.
- foreach my $var_ref (\$oinkmaster, \$oinkmaster_conf, \$outdir,
- \$varfile, \$url, \$backupdir) {
- if ($^O eq 'MSWin32' && $$var_ref) {
- $$var_ref = "\"$$var_ref\"";
- }
- }
-
- push(@$cmd_ref,
- "$config{perl}", "$oinkmaster",
- "-C", "$oinkmaster_conf",
- "-o", "$outdir");
-
- push(@$cmd_ref, "-c") if ($config{careful});
- push(@$cmd_ref, "-e") if ($config{enable_all});
- push(@$cmd_ref, "-r") if ($config{check_removed});
- push(@$cmd_ref, "-q") if ($config{output_mode} eq "quiet");
- push(@$cmd_ref, "-Q") if ($config{output_mode} eq "super-quiet");
- push(@$cmd_ref, "-v") if ($config{output_mode} eq "verbose");
- push(@$cmd_ref, "-m") if ($config{diff_mode} eq "remove common");
- push(@$cmd_ref, "-s") if ($config{diff_mode} eq "summarized");
- push(@$cmd_ref, "-U", "$varfile") if ($varfile);
- push(@$cmd_ref, "-b", "$backupdir") if ($backupdir);
-
- push(@$cmd_ref, "-u", "$url")
- if ($url);
-
- return (1);
-}
-
-
-
-# Load $config file into %config hash.
-sub load_config()
-{
- unless (defined($gui_config_file) && $gui_config_file) {
- logmsg("Unable to determine config file location, is your \$HOME set?\n\n", 'ERROR');
- return;
- }
-
- unless (-e "$gui_config_file") {
- logmsg("$gui_config_file does not exist, keeping current/default settings\n\n", 'MISC');
- return;
- }
-
- unless (open(RC, "<", "$gui_config_file")) {
- logmsg("Could not open $gui_config_file for reading: $!\n\n", 'ERROR');
- return;
- }
-
- while (<RC>) {
- next unless (/^(\S+)=(.*)/);
- $config{$1} = $2;
- }
-
- close(RC);
- logmsg("Successfully loaded GUI settings from $gui_config_file\n\n", 'MISC');
-}
-
-
-
-# Save %config into file $config.
-sub save_config()
-{
- unless (defined($gui_config_file) && $gui_config_file) {
- logmsg("Unable to determine config file location, is your \$HOME set?\n\n", 'ERROR');
- return;
- }
-
- unless (open(RC, ">", "$gui_config_file")) {
- logmsg("Could not open $gui_config_file for writing: $!\n\n", 'ERROR');
- return;
- }
-
- print RC "# Automatically created by Oinkgui. ".
- "Do not edit directly unless you have to.\n";
-
- foreach my $option (sort(keys(%config))) {
- print RC "$option=$config{$option}\n";
- }
-
- close(RC);
- logmsg("Successfully saved current GUI settings to $gui_config_file\n\n", 'MISC');
-}
diff --git a/config/snort/bin/oinkmaster_contrib/oinkmaster.pl b/config/snort/bin/oinkmaster_contrib/oinkmaster.pl
deleted file mode 100644
index f9c4d215..00000000
--- a/config/snort/bin/oinkmaster_contrib/oinkmaster.pl
+++ /dev/null
@@ -1,2754 +0,0 @@
-#!/usr/bin/perl -w
-
-# $Id: oinkmaster.pl,v 1.406 2006/02/10 13:02:44 andreas_o Exp $ #
-
-# Copyright (c) 2001-2006 Andreas Östling <andreaso@it.su.se>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or
-# without modification, are permitted provided that the following
-# conditions are met:
-#
-# 1. Redistributions of source code must retain the above
-# copyright notice, this list of conditions and the following
-# disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials
-# provided with the distribution.
-#
-# 3. Neither the name of the author nor the names of its
-# contributors may be used to endorse or promote products
-# derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-use 5.006001;
-
-use strict;
-use File::Basename;
-use File::Copy;
-use File::Path;
-use File::Spec;
-use Getopt::Long;
-use File::Temp qw(tempdir);
-
-sub show_usage();
-sub parse_cmdline($);
-sub read_config($ $);
-sub sanity_check();
-sub download_file($ $);
-sub unpack_rules_archive($ $ $);
-sub join_tmp_rules_dirs($ $ @);
-sub process_rules($ $ $ $ $ $);
-sub process_rule($ $ $ $ $ $ $ $);
-sub setup_rules_hash($ $);
-sub get_first_only($ $ $);
-sub print_changes($ $);
-sub print_changetype($ $ $ $);
-sub print_summary_change($ $);
-sub make_backup($ $);
-sub get_changes($ $ $);
-sub update_rules($ @);
-sub copy_rules($ $);
-sub is_in_path($);
-sub get_next_entry($ $ $ $ $ $);
-sub get_new_vars($ $ $ $);
-sub add_new_vars($ $);
-sub write_new_vars($ $);
-sub msdos_to_cygwin_path($);
-sub parse_mod_expr($ $ $ $);
-sub untaint_path($);
-sub approve_changes();
-sub parse_singleline_rule($ $ $);
-sub join_multilines($);
-sub minimize_diff($ $);
-sub catch_sigint();
-sub clean_exit($);
-
-
-my $VERSION = 'Oinkmaster v2.0, Copyright (C) 2001-2006 '.
- 'Andreas Östling <andreaso@it.su.se>';
-my $OUTFILE = 'snortrules.tar.gz';
-my $RULES_DIR = 'rules';
-
-my $PRINT_NEW = 1;
-my $PRINT_OLD = 2;
-my $PRINT_BOTH = 3;
-
-my %config = (
- careful => 0,
- check_removed => 0,
- config_test_mode => 0,
- enable_all => 0,
- interactive => 0,
- make_backup => 0,
- minimize_diff => 0,
- min_files => 1,
- min_rules => 1,
- quiet => 0,
- summary_output => 0,
- super_quiet => 0,
- update_vars => 0,
- use_external_bins => 1,
- verbose => 0,
- use_path_checks => 1,
- rule_actions => "alert|drop|log|pass|reject|sdrop|activate|dynamic",
- tmp_basedir => $ENV{TMP} || $ENV{TMPDIR} || $ENV{TEMPDIR} || '/tmp',
-);
-
-
-# Regexp to match the start of a multi-line rule.
-# %ACTIONS% will be replaced with content of $config{actions} later.
-# sid and msg will then be looked for in parse_singleline_rule().
-my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.*\\\\\s*\n$'; # ';
-
-# Regexp to match a single-line rule.
-# sid and msg will then be looked for in parse_singleline_rule().
-my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'.
- '\s.+;\s*\)\s*$'; # ';
-
-# Match var line where var name goes into $1.
-my $VAR_REGEXP = '^\s*var\s+(\S+)\s+(\S+)';
-
-# Allowed characters in misc paths/filenames, including the ones in the tarball.
-my $OK_PATH_CHARS = 'a-zA-Z\d\ _\(\)\[\]\.\-+:\\\/~@,=';
-
-# Default locations for configuration file.
-my @DEFAULT_CONFIG_FILES = qw(
- /etc/oinkmaster.conf
- /usr/local/etc/oinkmaster.conf
-);
-
-my @DEFAULT_DIST_VAR_FILES = qw(
- snort.conf
-);
-
-my (%loaded, $tmpdir);
-
-
-
-#### MAIN ####
-
-# No buffering.
-select(STDERR);
-$| = 1;
-select(STDOUT);
-$| = 1;
-
-
-my $start_date = scalar(localtime);
-
-# Assume the required Perl modules are available if we're on Windows.
-$config{use_external_bins} = 0 if ($^O eq "MSWin32");
-
-# Parse command line arguments and add at least %config{output_dir}.
-parse_cmdline(\%config);
-
-# If no config was specified on command line, look for one in default locations.
-if ($#{$config{config_files}} == -1) {
- foreach my $config (@DEFAULT_CONFIG_FILES) {
- if (-e "$config") {
- push(@{${config{config_files}}}, $config);
- last;
- }
- }
-}
-
-# If no dist var file was specified on command line, set to default file(s).
-if ($#{$config{dist_var_files}} == -1) {
- foreach my $var_file (@DEFAULT_DIST_VAR_FILES) {
- push(@{${config{dist_var_files}}}, $var_file);
- }
-}
-
-# If config is still not defined, we can't continue.
-if ($#{$config{config_files}} == -1) {
- clean_exit("configuration file not found in default locations\n".
- "(@DEFAULT_CONFIG_FILES)\n".
- "Put it there or use the \"-C <file>\" argument.");
-}
-
-read_config($_, \%config) for @{$config{config_files}};
-
-# Now substitute "%ACTIONS%" with $config{rule_actions}, which may have
-# been modified after reading the config file.
-$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/;
-
-# If we're told not to use external binaries, load the Perl modules now.
-unless ($config{use_external_bins}) {
- print STDERR "Loading Perl modules.\n" if ($config{verbose});
-
- eval {
- require IO::Zlib;
- require Archive::Tar;
- require LWP::UserAgent;
- };
-
- clean_exit("failed to load required Perl modules:\n\n$@\n".
- "Install them or set use_external_bins to 1 ".
- "if you want to use external binaries instead.")
- if ($@);
-}
-
-
-# Do some basic sanity checking and exit if something fails.
-# A new PATH will be set.
-sanity_check();
-
-$SIG{INT} = \&catch_sigint;
-
-# Create temporary dir.
-$tmpdir = tempdir("oinkmaster.XXXXXXXXXX", DIR => File::Spec->rel2abs($config{tmp_basedir}))
- or clean_exit("could not create temporary directory in $config{tmp_basedir}: $!");
-
-# If we're in config test mode and have come this far, we're done.
-if ($config{config_test_mode}) {
- print "No fatal errors in configuration.\n";
- clean_exit("");
-}
-
-umask($config{umask}) if exists($config{umask});
-
-# Download and unpack all the rules archives into separate tmp dirs.
-my @url_tmpdirs;
-foreach my $url (@{$config{url}}) {
- my $url_tmpdir = tempdir("url.XXXXXXXXXX", DIR => $tmpdir)
- or clean_exit("could not create temporary directory in $tmpdir: $!");
- push(@url_tmpdirs, "$url_tmpdir/$RULES_DIR");
- if ($url =~ /^dir:\/\/(.+)/) {
- mkdir("$url_tmpdir/$RULES_DIR")
- or clean_exit("Could not create $url_tmpdir/$RULES_DIR");
- copy_rules($1, "$url_tmpdir/$RULES_DIR");
- } else {
- download_file($url, "$url_tmpdir/$OUTFILE");
- unpack_rules_archive("$url", "$url_tmpdir/$OUTFILE", $RULES_DIR);
- }
-}
-
-# Copy all rules files from the tmp dirs into $RULES_DIR in the tmp directory.
-# File matching 'skipfile' a directive will not be copied.
-# Filenames (with full path) will be stored as %new_files{filename}.
-# Will exit in case of duplicate filenames.
-my $num_files = join_tmp_rules_dirs("$tmpdir/$RULES_DIR", \my %new_files, @url_tmpdirs);
-
-# Make sure we have at least the minimum number of files.
-clean_exit("not enough rules files in downloaded rules archive(s).\n".
- "Number of rules files is $num_files but minimum is set to $config{min_files}.")
- if ($num_files < $config{min_files});
-
-# This is to read in possible 'localsid' rules.
-my %rh_tmp = setup_rules_hash(\%new_files, $config{output_dir});
-
-# Disable/modify/clean downloaded rules.
-my $num_rules = process_rules(\@{$config{sid_modify_list}},
- \%{$config{sid_disable_list}},
- \%{$config{sid_enable_list}},
- \%{$config{sid_local_list}},
- \%rh_tmp,
- \%new_files);
-
-# Make sure we have at least the minimum number of rules.
-clean_exit("not enough rules in downloaded archive(s).\n".
- "Number of rules is $num_rules but minimum is set to $config{min_rules}.")
- if ($num_rules < $config{min_rules});
-
-# Setup a hash containing the content of all processed rules files.
-my %rh = setup_rules_hash(\%new_files, $config{output_dir});
-
-# Compare the new rules to the old ones.
-my %changes = get_changes(\%rh, \%new_files, $RULES_DIR);
-
-# Check for variables that exist in dist snort.conf(s) but not in local snort.conf.
-get_new_vars(\%changes, \@{$config{dist_var_files}}, $config{varfile}, \@url_tmpdirs)
- if ($config{update_vars});
-
-
-# Find out if something had changed.
-my $something_changed = 0;
-
-$something_changed = 1
- if (keys(%{$changes{modified_files}}) ||
- keys(%{$changes{added_files}}) ||
- keys(%{$changes{removed_files}}) ||
- $#{$changes{new_vars}} > -1);
-
-
-# Update files listed in %changes{modified_files} (copy the new files
-# from the temporary directory into our output directory) and add new
-# variables to the local snort.conf if requested, unless we're running in
-# careful mode. Create backup first if running with -b.
-my $printed = 0;
-if ($something_changed) {
- if ($config{careful}) {
- print STDERR "Skipping backup since we are running in careful mode.\n"
- if ($config{make_backup} && (!$config{quiet}));
- } else {
- if ($config{interactive}) {
- print_changes(\%changes, \%rh);
- $printed = 1;
- }
-
- if (!$config{interactive} || ($config{interactive} && approve_changes)) {
- make_backup($config{output_dir}, $config{backup_dir})
- if ($config{make_backup});
-
- add_new_vars(\%changes, $config{varfile})
- if ($config{update_vars});
-
- update_rules($config{output_dir}, keys(%{$changes{modified_files}}));
- }
- }
-} else {
- print STDERR "No files modified - no need to backup old files, skipping.\n"
- if ($config{make_backup} && !$config{quiet});
-}
-
-print "\nOinkmaster is running in careful mode - not updating anything.\n"
- if ($something_changed && $config{careful});
-
-print_changes(\%changes, \%rh)
- if (!$printed && ($something_changed || !$config{quiet}));
-
-
-# Everything worked. Do a clean exit without any error message.
-clean_exit("");
-
-
-# END OF MAIN #
-
-
-
-# Show usage information and exit.
-sub show_usage()
-{
- my $progname = basename($0);
-
- print STDERR << "RTFM";
-
-$VERSION
-
-Usage: $progname -o <outdir> [options]
-
-<outdir> is where to put the new files.
-This should be the directory where you store your Snort rules.
-
-Options:
--b <dir> Backup your old rules into <dir> before overwriting them
--c Careful mode (dry run) - check for changes but do not update anything
--C <file> Use this configuration file instead of the default
- May be specified multiple times to load multiple files
--e Enable all rules that are disabled by default
--h Show this usage information
--i Interactive mode - you will be asked to approve the changes (if any)
--m Minimize diff when printing result by removing common parts in rules
--q Quiet mode - no output unless changes were found
--Q Super-quiet mode - like -q but even more quiet
--r Check for rules files that exist in the output directory
- but not in the downloaded rules archive
--s Leave out details in rules results, just print SID, msg and filename
--S <file> Look for new variables in this file in the downloaded archive instead
- of the default (@DEFAULT_DIST_VAR_FILES). Used in conjunction with -U.
- May be specified multiple times to search multiple files.
--T Config test - just check configuration file(s) for errors/warnings
--u <url> Download from this URL instead of URL(s) in the configuration file
- (http|https|ftp|file|scp:// ... .tar.gz|.gz, or dir://<dir>)
- May be specified multiple times to grab multiple rules archives
--U <file> Merge new variables from downloaded snort.conf(s) into <file>
--v Verbose mode (debug)
--V Show version and exit
-
-RTFM
- exit;
-}
-
-
-
-# Parse the command line arguments and exit if we don't like them.
-sub parse_cmdline($)
-{
- my $cfg_ref = shift;
-
- Getopt::Long::Configure("bundling");
-
- my $cmdline_ok = GetOptions(
- "b=s" => \$$cfg_ref{backup_dir},
- "c" => \$$cfg_ref{careful},
- "C=s" => \@{$$cfg_ref{config_files}},
- "e" => \$$cfg_ref{enable_all},
- "h" => \&show_usage,
- "i" => \$$cfg_ref{interactive},
- "m" => \$$cfg_ref{minimize_diff},
- "o=s" => \$$cfg_ref{output_dir},
- "q" => \$$cfg_ref{quiet},
- "Q" => \$$cfg_ref{super_quiet},
- "r" => \$$cfg_ref{check_removed},
- "s" => \$$cfg_ref{summary_output},
- "S=s" => \@{$$cfg_ref{dist_var_files}},
- "T" => \$$cfg_ref{config_test_mode},
- "u=s" => \@{$$cfg_ref{url}},
- "U=s" => \$$cfg_ref{varfile},
- "v" => \$$cfg_ref{verbose},
- "V" => sub {
- print "$VERSION\n";
- exit(0);
- }
- );
-
-
- show_usage unless ($cmdline_ok && $#ARGV == -1);
-
- $$cfg_ref{quiet} = 1 if ($$cfg_ref{super_quiet});
- $$cfg_ref{update_vars} = 1 if ($$cfg_ref{varfile});
-
- if ($$cfg_ref{backup_dir}) {
- $$cfg_ref{backup_dir} = File::Spec->canonpath($$cfg_ref{backup_dir});
- $$cfg_ref{make_backup} = 1;
- }
-
- # Cannot specify dist var files without specifying var target file.
- if (@{$$cfg_ref{dist_var_files}} && !$$cfg_ref{update_vars}) {
- clean_exit("You can not specify distribution variable file(s) without ".
- "also specifying local file to merge into");
- }
-
- # -o <dir> is the only required option in normal usage.
- if ($$cfg_ref{output_dir}) {
- $$cfg_ref{output_dir} = File::Spec->canonpath($$cfg_ref{output_dir});
- } else {
- warn("Error: no output directory specified.\n");
- show_usage();
- }
-
- # Mark that url was set on command line (so we don't override it later).
- $$cfg_ref{cmdline_url} = 1 if ($#{$config{url}} > -1);
-}
-
-
-
-# Read in stuff from the configuration file.
-sub read_config($ $)
-{
- my $config_file = shift;
- my $cfg_ref = shift;
- my $linenum = 0;
- my $multi;
- my %templates;
-
- $config_file = File::Spec->canonpath(File::Spec->rel2abs($config_file));
-
- clean_exit("configuration file \"$config_file\" does not exist.\n")
- unless (-e "$config_file");
-
- clean_exit("\"$config_file\" is not a file.\n")
- unless (-f "$config_file");
-
- print STDERR "Loading $config_file\n"
- unless ($config{quiet});
-
- # Avoid loading the same file multiple times to avoid infinite recursion etc.
- if ($^O eq "MSWin32") {
- clean_exit("attempt to load \"$config_file\" twice.")
- if ($loaded{$config_file}++);
- } else {
- my ($dev, $ino) = (stat($config_file))[0,1]
- or clean_exit("unable to stat $config_file: $!");
- clean_exit("attempt to load \"$config_file\" twice.")
- if ($loaded{$dev, $ino}++);
- }
-
- open(CONF, "<", "$config_file")
- or clean_exit("could not open configuration file \"$config_file\": $!");
- my @conf = <CONF>;
- close(CONF);
-
- LINE:while ($_ = shift(@conf)) {
- $linenum++;
-
- unless ($multi) {
- s/^\s*//;
- s/^#.*//;
- }
-
- # Multi-line start/continuation.
- if (/\\\s*\n$/) {
- s/\\\s*\n$//;
- s/^\s*#.*//;
-
- # Be strict about removing #comments in modifysid/define_template statements, as
- # they may contain other '#' chars.
- if (defined($multi) && ($multi =~ /^modifysid/i || $multi =~ /^define_template/i)) {
- s/#.*// if (/^\s*\d+[,\s\d]+#/);
- } else {
- s/\s*\#.*// unless (/^modifysid/i || /^define_template/i);
- }
-
- $multi .= $_;
- next LINE;
- }
-
- # Last line of multi-line directive.
- if (defined($multi)) {
- $multi .= $_;
- $_ = $multi;
- undef($multi);
- }
-
- # Remove traling whitespaces (*after* a possible multi-line is rebuilt).
- s/\s*$//;
-
- # Remove comments unless it's a modifysid/define_template line
- # (the "#" may be part of the modifysid expression).
- s/\s*\#.*// unless (/^modifysid/i || /^define_template/i);
-
- # Skip blank lines.
- next unless (/\S/);
-
- # Use a template and make $_ a "modifysid" line.
- if (/^use_template\s+(\S+)\s+(\S+[^"]*)\s*(".*")*(?:#.*)*/i) {
- my ($template_name, $sid, $args) = ($1, $2, $3);
-
- if (exists($templates{$template_name})) {
- my $template = $templates{$template_name}; # so we don't substitute %ARGx% globally
-
- # Evaluate each "%ARGx%" in the template to the corresponding value.
- if (defined($args)) {
- my @args = split(/"\s+"/, $args);
- foreach my $i (1 .. @args) {
- $args[$i - 1] =~ s/^"//;
- $args[$i - 1] =~ s/"$//;
- $template =~ s/%ARG$i%/$args[$i - 1]/g;
- }
- }
-
- # There should be no %ARGx% stuff left now.
- if ($template =~ /%ARG\d%/) {
- warn("WARNING: too few arguments for template \"$template_name\"\n");
- $_ = "error"; # so it will be reported as an invalid line later
- }
-
- unless ($_ eq "error") {
- $_ = "modifysid $sid $template\n";
- print STDERR "Template \"$template_name\" expanded to: $_"
- if ($config{verbose});
- }
-
- } else {
- warn("WARNING: template \"$template_name\" has not been defined\n");
- }
- }
-
- # new template definition.
- if (/^define_template\s+(\S+)\s+(".+"\s+\|\s+".*")\s*(?:#.*)*$/i) {
- my ($template_name, $template) = ($1, $2);
-
- if (exists($templates{$template_name})) {
- warn("WARNING: line $linenum in $config_file: ".
- "template \"$template_name\" already defined, keeping old\n");
- } else {
- $templates{$template_name} = $template;
- }
-
- # modifysid <SIDORFILE[,SIDORFILE, ...]> "substthis" | "withthis"
- } elsif (/^modifysids*\s+(\S+.*)\s+"(.+)"\s+\|\s+"(.*)"\s*(?:#.*)*$/i) {
- my ($sid_list, $subst, $repl) = ($1, $2, $3);
- warn("WARNING: line $linenum in $config_file is invalid, ignoring\n")
- unless(parse_mod_expr(\@{$$cfg_ref{sid_modify_list}},
- $sid_list, $subst, $repl));
-
- # disablesid <SID[,SID, ...]>
- } elsif (/^disablesids*\s+(\d.*)/i) {
- my $sid_list = $1;
- foreach my $sid (split(/\s*,\s*/, $sid_list)) {
- if ($sid =~ /^\d+$/) {
- $$cfg_ref{sid_disable_list}{$sid}++;
- } else {
- warn("WARNING: line $linenum in $config_file: ".
- "\"$sid\" is not a valid SID, ignoring\n");
- }
- }
-
- # localsid <SID[,SID, ...]>
- } elsif (/^localsids*\s+(\d.*)/i) {
- my $sid_list = $1;
- foreach my $sid (split(/\s*,\s*/, $sid_list)) {
- if ($sid =~ /^\d+$/) {
- $$cfg_ref{sid_local_list}{$sid}++;
- } else {
- warn("WARNING: line $linenum in $config_file: ".
- "\"$sid\" is not a valid SID, ignoring\n");
- }
- }
-
- # enablesid <SID[,SID, ...]>
- } elsif (/^enablesids*\s+(\d.*)/i) {
- my $sid_list = $1;
- foreach my $sid (split(/\s*,\s*/, $sid_list)) {
- if ($sid =~ /^\d+$/) {
- $$cfg_ref{sid_enable_list}{$sid}++;
- } else {
- warn("WARNING: line $linenum in $config_file: ".
- "\"$sid\" is not a valid SID, ignoring\n");
- }
- }
-
- # skipfile <file[,file, ...]>
- } elsif (/^skipfiles*\s+(.*)/i) {
- my $args = $1;
- foreach my $file (split(/\s*,\s*/, $args)) {
- if ($file =~ /^\S+$/) {
- $config{verbose} && print STDERR "Adding file to ignore list: $file.\n";
- $$cfg_ref{file_ignore_list}{$file}++;
- } else {
- warn("WARNING: line $linenum in $config_file is invalid, ignoring\n");
- }
- }
-
- } elsif (/^url\s*=\s*(.*)/i) {
- push(@{$$cfg_ref{url}}, $1)
- unless ($$cfg_ref{cmdline_url});
-
- } elsif (/^path\s*=\s*(.+)/i) {
- $$cfg_ref{path} = $1;
-
- } elsif (/^update_files\s*=\s*(.+)/i) {
- $$cfg_ref{update_files} = $1;
-
- } elsif (/^rule_actions\s*=\s*(.+)/i) {
- $$cfg_ref{rule_actions} = $1;
-
- } elsif (/^umask\s*=\s*([0-7]{4})$/i) {
- $$cfg_ref{umask} = oct($1);
-
- } elsif (/^min_files\s*=\s*(\d+)/i) {
- $$cfg_ref{min_files} = $1;
-
- } elsif (/^min_rules\s*=\s*(\d+)/i) {
- $$cfg_ref{min_rules} = $1;
-
- } elsif (/^tmpdir\s*=\s*(.+)/i) {
- $$cfg_ref{tmp_basedir} = $1;
-
- } elsif (/^use_external_bins\s*=\s*([01])/i) {
- $$cfg_ref{use_external_bins} = $1;
-
- } elsif (/^scp_key\s*=\s*(.+)/i) {
- $$cfg_ref{scp_key} = $1;
-
- } elsif (/^use_path_checks\s*=\s*([01])/i) {
- $$cfg_ref{use_path_checks} = $1;
-
- } elsif (/^user_agent\s*=\s*(.+)/i) {
- $$cfg_ref{user_agent} = $1;
-
- } elsif (/^include\s+(\S+.*)/i) {
- my $include = $1;
- read_config($include, $cfg_ref);
- } else {
- warn("WARNING: line $linenum in $config_file is invalid, ignoring\n");
- }
- }
-}
-
-
-
-# Make a few basic tests to make sure things look ok.
-# Will also set a new PATH as defined in the config file.
-sub sanity_check()
-{
- my @req_params = qw(path update_files); # required parameters in conf
- my @req_binaries = qw(gzip tar); # required binaries (unless we use modules)
-
- # Can't use both quiet mode and verbose mode.
- clean_exit("quiet mode and verbose mode at the same time doesn't make sense.")
- if ($config{quiet} && $config{verbose});
-
- # Can't use multiple output modes.
- clean_exit("can't use multiple output modes at the same time.")
- if ($config{minimize_diff} && $config{summary_output});
-
- # Make sure all required variables are defined in the config file.
- foreach my $param (@req_params) {
- clean_exit("the required parameter \"$param\" is not defined in the configuration file.")
- unless (exists($config{$param}));
- }
-
- # We now know a path was defined in the config, so set it.
- # If we're under cygwin and path was specified as msdos style, convert
- # it to cygwin style to avoid problems.
- if ($^O eq "cygwin" && $config{path} =~ /^[a-zA-Z]:[\/\\]/) {
- $ENV{PATH} = "";
- foreach my $path (split(/;/, $config{path})) {
- $ENV{PATH} .= "$path:" if (msdos_to_cygwin_path(\$path));
- }
- chop($ENV{PATH});
- } else {
- $ENV{PATH} = $config{path};
- }
-
- # Reset environment variables that may cause trouble.
- delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'};
-
- # Make sure $config{update_files} is a valid regexp.
- eval {
- "foo" =~ /$config{update_files}/;
- };
-
- clean_exit("update_files (\"$config{update_files}\") is not a valid regexp: $@")
- if ($@);
-
- # Make sure $config{rule_actions} is a valid regexp.
- eval {
- "foo" =~ /$config{rule_actions}/;
- };
-
- clean_exit("rule_actions (\"$config{rule_actions}\") is not a valid regexp: $@")
- if ($@);
-
- # If a variable file (probably local snort.conf) has been specified,
- # it must exist. It must also be writable unless we're in careful mode.
- if ($config{update_vars}) {
- $config{varfile} = untaint_path($config{varfile});
-
- clean_exit("variable file \"$config{varfile}\" does not exist.")
- unless (-e "$config{varfile}");
-
- clean_exit("variable file \"$config{varfile}\" is not a file.")
- unless (-f "$config{varfile}");
-
- clean_exit("variable file \"$config{varfile}\" is not writable by you.")
- if (!$config{careful} && !-w "$config{varfile}");
-
- # Make sure dist var files don't contain [back]slashes
- # (probably means user confused it with local var file).
- my %dist_var_files;
- foreach my $dist_var_file (@{${config{dist_var_files}}}) {
- clean_exit("variable file \"$dist_var_file\" specified multiple times")
- if (exists($dist_var_files{$dist_var_file}));
- $dist_var_files{$dist_var_file} = 1;
- clean_exit("variable file \"$dist_var_file\" contains slashes or backslashes ".
- "but it must be specified as a filename (without path) ".
- "that exists in the downloaded rules, e.g. \"snort.conf\"")
- if ($dist_var_file =~ /\// || $dist_var_file =~ /\\/);
- }
- }
-
- # Make sure all required binaries can be found, unless
- # we're used to use Perl modules instead.
- # Wget is only required if url is http[s] or ftp.
- if ($config{use_external_bins}) {
- foreach my $binary (@req_binaries) {
- clean_exit("$binary not found in PATH ($ENV{PATH}).")
- unless (is_in_path($binary));
- }
- }
-
- # Make sure $url is defined (either by -u <url> or url=... in the conf).
- clean_exit("URL not specified. Specify at least one \"url=<url>\" in the \n".
- "Oinkmaster configuration file or use the \"-u <url>\" argument")
- if ($#{$config{url}} == -1);
-
- # Make sure all urls look ok, and untaint them.
- my @urls = @{$config{url}};
- $#{$config{url}} = -1;
- foreach my $url (@urls) {
- clean_exit("incorrect URL: \"$url\"")
- unless ($url =~ /^((?:https*|ftp|file|scp):\/\/.+\.(?:tar\.gz|tgz))$/
- || $url =~ /^(dir:\/\/.+)/);
- my $ok_url = $1;
-
- if ($ok_url =~ /^dir:\/\/(.+)/) {
- my $dir = untaint_path($1);
- clean_exit("\"$dir\" does not exist or is not a directory")
- unless (-d $dir);
-
- # Simple check if the output dir is specified as url (probably a mistake).
- if (File::Spec->canonpath(File::Spec->rel2abs($dir))
- eq File::Spec->canonpath(File::Spec->rel2abs($config{output_dir}))) {
- clean_exit("Download directory can not be same as output directory");
- }
- }
- push(@{$config{url}}, $ok_url);
- }
-
- # Wget must be found if url is http[s]:// or ftp://.
- if ($config{use_external_bins}) {
- clean_exit("wget not found in PATH ($ENV{PATH}).")
- if ($config{'url'} =~ /^(https*|ftp):/ && !is_in_path("wget"));
- }
-
- # scp must be found if scp://...
- clean_exit("scp not found in PATH ($ENV{PATH}).")
- if ($config{'url'} =~ /^scp:/ && !is_in_path("scp"));
-
- # ssh key must exist if specified and url is scp://...
- clean_exit("ssh key \"$config{scp_key}\" does not exist.")
- if ($config{'url'} =~ /^scp:/ && exists($config{scp_key})
- && !-e $config{scp_key});
-
- # Untaint output directory string.
- $config{output_dir} = untaint_path($config{output_dir});
-
- # Make sure the output directory exists and is readable.
- clean_exit("the output directory \"$config{output_dir}\" doesn't exist ".
- "or isn't readable by you.")
- if (!-d "$config{output_dir}" || !-x "$config{output_dir}");
-
- # Make sure the output directory is writable unless running in careful mode.
- clean_exit("the output directory \"$config{output_dir}\" isn't writable by you.")
- if (!$config{careful} && !-w "$config{output_dir}");
-
- # Make sure we have read permission on all rules files in the output dir,
- # and also write permission unless we're in careful mode.
- # This is to avoid bailing out in the middle of an execution if a copy
- # fails because of permission problem.
- opendir(OUTDIR, "$config{output_dir}")
- or clean_exit("could not open directory $config{output_dir}: $!");
-
- while ($_ = readdir(OUTDIR)) {
- next if (/^\.\.?$/ || exists($config{file_ignore_list}{$_}));
-
- if (/$config{update_files}/) {
- unless (-r "$config{output_dir}/$_") {
- closedir(OUTDIR);
- clean_exit("no read permission on \"$config{output_dir}/$_\"\n".
- "Read permission is required on all rules files ".
- "inside the output directory.\n")
- }
-
- if (!$config{careful} && !-w "$config{output_dir}/$_") {
- closedir(OUTDIR);
- clean_exit("no write permission on \"$config{output_dir}/$_\"\n".
- "Write permission is required on all rules files ".
- "inside the output directory.\n")
- }
- }
- }
-
- closedir(OUTDIR);
-
- # Make sure the backup directory exists and is writable if running with -b.
- if ($config{make_backup}) {
- $config{backup_dir} = untaint_path($config{backup_dir});
- clean_exit("the backup directory \"$config{backup_dir}\" doesn't exist or ".
- "isn't writable by you.")
- if (!-d "$config{backup_dir}" || !-w "$config{backup_dir}");
- }
-
- # Convert tmp_basedir to cygwin style if running cygwin and msdos style was specified.
- if ($^O eq "cygwin" && $config{tmp_basedir} =~ /^[a-zA-Z]:[\/\\]/) {
- msdos_to_cygwin_path(\$config{tmp_basedir})
- or clean_exit("could not convert temporary dir to cygwin style");
- }
-
- # Make sure temporary directory exists.
- clean_exit("the temporary directory \"$config{tmp_basedir}\" does not ".
- "exist or isn't writable by you.")
- if (!-d "$config{tmp_basedir}" || !-w "$config{tmp_basedir}");
-
- # Also untaint it.
- $config{tmp_basedir} = untaint_path($config{tmp_basedir});
-
- # Make sure stdin and stdout are ttys if we're running in interactive mode.
- clean_exit("you can not run in interactive mode when STDIN/STDOUT is not a TTY.")
- if ($config{interactive} && !(-t STDIN && -t STDOUT));
-}
-
-
-
-# Download the rules archive.
-sub download_file($ $)
-{
- my $url = shift;
- my $localfile = shift;
- my $log = "$tmpdir/wget.log";
- my $ret;
-
- # If there seems to be a password in the url, replace it with "*password*"
- # and use new string when printing the url to screen.
- my $obfuscated_url = $url;
- $obfuscated_url = "$1:*password*\@$2"
- if ($obfuscated_url =~ /^(\S+:\/\/.+?):.+?@(.+)/);
-
- # Ofbuscate oinkcode as well.
- $obfuscated_url = "$1*oinkcode*$2"
- if ($obfuscated_url =~ /^(\S+:\/\/.+\.cgi\/)[0-9a-z]{32,64}(\/.+)/i);
-
- my @user_agent_opt;
- @user_agent_opt = ("-U", $config{user_agent}) if (exists($config{user_agent}));
-
- # Use wget if URL starts with "http[s]" or "ftp" and we use external binaries.
- if ($config{use_external_bins} && $url =~ /^(?:https*|ftp)/) {
- print STDERR "Downloading file from $obfuscated_url... "
- unless ($config{quiet});
-
- if ($config{verbose}) {
- print STDERR "\n";
- my @wget_cmd = ("wget", "-v", "-O", $localfile, $url, @user_agent_opt);
- clean_exit("could not download from $obfuscated_url")
- if (system(@wget_cmd));
-
- } else {
- my @wget_cmd = ("wget", "-v", "-o", $log, "-O", $localfile, $url, @user_agent_opt);
- if (system(@wget_cmd)) {
- my $log_output;
- open(LOG, "<", "$log")
- or clean_exit("could not open $log for reading: $!");
- # Sanitize oinkcode in wget's log (password is automatically sanitized).
- while (<LOG>) {
- $_ = "$1*oinkcode*$2"
- if (/(\S+:\/\/.+\.cgi\/)[0-9a-z]{32,64}(\/.+)/i);
- $log_output .= $_;
- }
- close(LOG);
- clean_exit("could not download from $obfuscated_url. ".
- "Output from wget follows:\n\n $log_output");
- }
- print STDERR "done.\n" unless ($config{quiet});
- }
-
- # Use LWP if URL starts with "http[s]" or "ftp" and use_external_bins=0.
- } elsif (!$config{use_external_bins} && $url =~ /^(?:https*|ftp)/) {
- print STDERR "Downloading file from $obfuscated_url... "
- unless ($config{quiet});
-
- my %lwp_opt;
- $lwp_opt{agent} = $config{user_agent} if (exists($config{user_agent}));
-
- my $ua = LWP::UserAgent->new(%lwp_opt);
- $ua->env_proxy;
- my $request = HTTP::Request->new(GET => $url);
- my $response = $ua->request($request, $localfile);
-
- clean_exit("could not download from $obfuscated_url: " . $response->status_line)
- unless $response->is_success;
-
- print "done.\n" unless ($config{quiet});
-
- # Grab file from local filesystem if file://...
- } elsif ($url =~ /^file/) {
- $url =~ s/^file:\/\///;
-
- clean_exit("the file $url does not exist.")
- unless (-e "$url");
-
- clean_exit("the file $url is empty.")
- unless (-s "$url");
-
- print STDERR "Copying file from $url... "
- unless ($config{quiet});
-
- copy("$url", "$localfile")
- or clean_exit("unable to copy $url to $localfile: $!");
-
- print STDERR "done.\n"
- unless ($config{quiet});
-
- # Grab file using scp if scp://...
- } elsif ($url =~ /^scp/) {
- $url =~ s/^scp:\/\///;
-
- my @cmd;
- push(@cmd, "scp");
- push(@cmd, "-i", "$config{scp_key}") if (exists($config{scp_key}));
- push(@cmd, "-q") if ($config{quiet});
- push(@cmd, "-v") if ($config{verbose});
- push(@cmd, "$url", "$localfile");
-
- print STDERR "Copying file from $url using scp:\n"
- unless ($config{quiet});
-
- clean_exit("scp returned error when trying to copy $url")
- if (system(@cmd));
-
- # Unknown download method.
- } else {
- clean_exit("unknown or unsupported download method\n");
- }
-
- # Make sure the downloaded file actually exists.
- clean_exit("failed to download $url: ".
- "local target file $localfile doesn't exist after download.")
- unless (-e "$localfile");
-
- # Also make sure it's at least non-empty.
- clean_exit("failed to download $url: local target file $localfile is empty ".
- "after download (perhaps you're out of diskspace or file in url is empty?)")
- unless (-s "$localfile");
-}
-
-
-
-# Copy all rules files from the tmp dirs (one for each url)
-# into a single directory inside the tmp dir, except for files
-# matching a 'skipfile' directive'.
-# Will exit in case of colliding filenames.
-sub join_tmp_rules_dirs($ $ @)
-{
- my $rules_dir = shift;
- my $new_files_ref = shift;
- my @url_tmpdirs = @_;
-
- my %rules_files;
-
- clean_exit("failed to create directory \"$rules_dir\": $!")
- unless (mkdir($rules_dir));
-
- foreach my $url_tmpdir (@url_tmpdirs) {
- opendir(URL_TMPDIR, "$url_tmpdir")
- or clean_exit("could not open directory \"$url_tmpdir\": $!");
-
- while ($_ = readdir(URL_TMPDIR)) {
- next if (/^\.\.?$/ || exists($config{file_ignore_list}{$_}) || !/$config{update_files}/);
-
- if (exists($rules_files{$_})) {
- closedir(URL_TMPDIR);
- clean_exit("a file called \"$_\" exists in multiple rules archives")
- }
-
- # Make sure it's a regular file.
- unless (-f "$url_tmpdir/$_" && !-l "$url_tmpdir/$_") {
- closedir(URL_TMPDIR);
- clean_exit("downloaded \"$_\" is not a regular file.")
- }
-
- $rules_files{$_} = 1;
- $$new_files_ref{"$rules_dir/$_"} = 1;
-
- my $src_file = untaint_path("$url_tmpdir/$_");
- unless (copy("$src_file", "$rules_dir")) {
- closedir(URL_TMPDIR);
- clean_exit("could not copy \"$src_file\" to \"$rules_dir\": $!");
- }
- }
-
- closedir(URL_TMPDIR);
- }
-
- return (keys(%$new_files_ref));
-}
-
-
-
-# Make a few basic sanity checks on the rules archive and then
-# uncompress/untar it if everything looked ok.
-sub unpack_rules_archive($ $ $)
-{
- my $url = shift; # only used when printing warnings/errors
- my $archive = shift;
- my $rules_dir = shift;
-
- my ($tar, @tar_content);
-
- my $old_dir = untaint_path(File::Spec->rel2abs(File::Spec->curdir()));
-
- my $dir = dirname($archive);
- chdir("$dir") or clean_exit("$url: could not change directory to \"$dir\": $!");
-
- if ($config{use_external_bins}) {
-
- # Run integrity check on the gzip file.
- clean_exit("$url: integrity check on gzip file failed (file transfer failed or ".
- "file in URL not in gzip format?).")
- if (system("gzip", "-t", "$archive"));
-
- # Decompress it.
- system("gzip", "-d", "$archive")
- and clean_exit("$url: unable to uncompress $archive.");
-
- # Suffix has now changed from .tar.gz|.tgz to .tar.
- $archive =~ s/\.gz$//;
-
- # Make sure the .tar file now exists.
- # (Gzip may not return an error if it was not a gzipped file...)
- clean_exit("$url: failed to unpack gzip file (file transfer failed or ".
- "file in URL not in tar'ed gzip format?).")
- unless (-e "$archive");
-
- my $stdout_file = "$tmpdir/tar_content.out";
-
- open(OLDOUT, ">&STDOUT") or clean_exit("could not dup STDOUT: $!");
- open(STDOUT, ">$stdout_file") or clean_exit("could not redirect STDOUT: $!");
-
- my $ret = system("tar", "tf", "$archive");
-
- close(STDOUT);
- open(STDOUT, ">&OLDOUT") or clean_exit("could not dup STDOUT: $!");
- close(OLDOUT);
-
- clean_exit("$url: could not list files in tar archive (is it broken?)")
- if ($ret);
-
- open(TAR, "$stdout_file") or clean_exit("failed to open $stdout_file: $!");
- @tar_content = <TAR>;
- close(TAR);
-
- # use_external_bins=0
- } else {
- $tar = Archive::Tar->new($archive, 1);
- clean_exit("$url: failed to read $archive (file transfer failed or ".
- "file in URL not in tar'ed gzip format?).")
- unless (defined($tar));
- @tar_content = $tar->list_files();
- }
-
- # Make sure we could grab some content from the tarball.
- clean_exit("$url: could not list files in tar archive (is it broken?)")
- if ($#tar_content < 0);
-
- # For each filename in the archive, do some basic sanity checks.
- foreach my $filename (@tar_content) {
- chomp($filename);
-
- # We don't want absolute filename.
- clean_exit("$url: rules archive contains absolute filename. ".
- "Offending file/line:\n$filename")
- if ($filename =~ /^\//);
-
- # We don't want to have any weird characters anywhere in the filename.
- clean_exit("$url: illegal character in filename in tar archive. Allowed are ".
- "$OK_PATH_CHARS\nOffending file/line:\n$filename")
- if ($config{use_path_checks} && $filename =~ /[^$OK_PATH_CHARS]/);
-
- # We don't want to unpack any "../../" junk (check is useless now though).
- clean_exit("$url: filename in tar archive contains \"..\".\n".
- "Offending file/line:\n$filename")
- if ($filename =~ /\.\./);
- }
-
- # Looks good. Now we can untar it.
- print STDERR "Archive successfully downloaded, unpacking... "
- unless ($config{quiet});
-
- if ($config{use_external_bins}) {
- clean_exit("failed to untar $archive.")
- if system("tar", "xf", "$archive");
- } else {
- mkdir("$rules_dir") or clean_exit("could not create \"$rules_dir\" directory: $!\n");
- foreach my $file ($tar->list_files) {
- next unless ($file =~ /^$rules_dir\/[^\/]+$/); # only ^rules/<file>$
-
- my $content = $tar->get_content($file);
-
- # Symlinks in the archive will make get_content return undef.
- clean_exit("could not get content from file \"$file\" in downloaded archive, ".
- "make sure it is a regular file\n")
- unless (defined($content));
-
- open(RULEFILE, ">", "$file")
- or clean_exit("could not open \"$file\" for writing: $!\n");
- print RULEFILE $content;
- close(RULEFILE);
- }
- }
-
- # Make sure that non-empty rules directory existed in archive.
- # We permit empty rules directory if min_files is set to 0 though.
- clean_exit("$url: no \"$rules_dir\" directory found in tar file.")
- unless (-d "$dir/$rules_dir");
-
- my $num_files = 0;
- opendir(RULESDIR, "$dir/$rules_dir")
- or clean_exit("could not open directory \"$dir/$rules_dir\": $!");
-
- while ($_ = readdir(RULESDIR)) {
- next if (/^\.\.?$/);
- $num_files++;
- }
-
- closedir(RULESDIR);
-
- clean_exit("$url: directory \"$rules_dir\" in unpacked archive is empty")
- if ($num_files == 0 && $config{min_files} != 0);
-
- chdir($old_dir)
- or clean_exit("could not change directory back to $old_dir: $!");
-
- print STDERR "done.\n"
- unless ($config{quiet});
-}
-
-
-
-# Open all rules files in the temporary directory and disable/modify all
-# rules/lines as requested in oinkmaster.conf, and then write back to the
-# same files. Also clean unwanted whitespaces and duplicate sids from them.
-sub process_rules($ $ $ $ $ $)
-{
- my $modify_sid_ref = shift;
- my $disable_sid_ref = shift;
- my $enable_sid_ref = shift;
- my $local_sid_ref = shift;
- my $rh_tmp_ref = shift;
- my $newfiles_ref = shift;
- my %sids;
-
- my %stats = (
- disabled => 0,
- enabled => 0,
- modified => 0,
- total => 0,
- );
-
- warn("WARNING: all rules that are disabled by default will be enabled\n")
- if ($config{enable_all} && !$config{quiet});
-
- print STDERR "Processing downloaded rules... "
- unless ($config{quiet});
-
- print STDERR "\n"
- if ($config{verbose});
-
- # Phase #1 - process all active rules and store in temporary hash.
- # In case of dups, we use the one with the highest rev.
- foreach my $file (sort(keys(%$newfiles_ref))) {
-
- open(INFILE, "<", "$file")
- or clean_exit("could not open $file for reading: $!");
- my @infile = <INFILE>;
- close(INFILE);
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- RULELOOP:while (get_next_entry(\@infile, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
-
- # We don't care about non-rules in this phase.
- next RULELOOP if (defined($nonrule));
-
- # Even if it was a single-line rule, we want a copy in $multi.
- $multi = $single unless (defined($multi));
-
- my %rule = (
- single => $single,
- multi => $multi,
- );
-
- # modify/disable/enable this rule as requested unless there is a matching
- # localsid statement. Possible verbose messages and warnings will be printed.
- unless (exists($$local_sid_ref{$sid})) {
- process_rule($modify_sid_ref, $disable_sid_ref, $enable_sid_ref,
- \%rule, $sid, \%stats, 1, basename($file));
- }
-
- $stats{total}++;
-
- $single = $rule{single};
- $multi = $rule{multi};
-
- # Only care about active rules in this phase (the rule may have been
- # disabled by a disablesid or a modifysid statement above, so we can't
- # do this check earlier).
- next RULELOOP if ($multi =~ /^#/);
-
- # Is it a dup? If so, see if this seems to be more recent (higher rev).
- if (exists($sids{$sid})) {
- warn("\nWARNING: duplicate SID in downloaded archive, SID=$sid, ".
- "only keeping rule with highest 'rev'\n")
- unless($config{super_quiet});
-
- my ($old_rev) = ($sids{$sid}{single} =~ /\brev\s*:\s*(\d+)\s*;/);
- my ($new_rev) = ($single =~ /\brev\s*:\s*(\d+)\s*;/);
-
- # This is so rules with a rev gets higher prio than
- # rules without any rev.
- $old_rev = -1 unless (defined($old_rev));
- $new_rev = -1 unless (defined($new_rev));
-
- # If this rev is higher than the one in the last stored rule with
- # this sid, replace rule with this one. This is also done if the
- # revs are equal because we assume the rule appearing last in the
- # rules file is the more recent rule.
- if ($new_rev >= $old_rev) {
- $sids{$sid}{single} = $single;
- $sids{$sid}{multi} = $multi;
- }
-
- # No dup.
- } else {
- $sids{$sid}{single} = $single;
- $sids{$sid}{multi} = $multi;
- }
- }
- }
-
- # Phase #2 - read all rules files again, but when writing active rules
- # back to the files, use the one stored in the sid hash (which is free of dups).
- foreach my $file (sort(keys(%$newfiles_ref))) {
-
- open(INFILE, "<", "$file")
- or clean_exit("could not open $file for reading: $!");
- my @infile = <INFILE>;
- close(INFILE);
-
- # Write back to the same file.
- open(OUTFILE, ">", "$file")
- or clean_exit("could not open $file for writing: $!");
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- RULELOOP:while (get_next_entry(\@infile, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
- if (defined($nonrule)) {
- print OUTFILE "$nonrule";
- next RULELOOP;
- }
-
- # Even if it was a single-line rule, we want a copy in $multi.
- $multi = $single unless (defined($multi));
-
- # If this rule is marked as localized and has not yet been written,
- # write the old version to the new rules file.
- if (exists($$local_sid_ref{$sid}) && !exists($sids{$sid}{printed})) {
-
- # Just ignore the rule in the downloaded file if it doesn't
- # exist in the same local file.
- unless(exists($$rh_tmp_ref{old}{rules}{basename($file)}{$sid})) {
- warn("WARNING: SID $sid is marked as local and exists in ".
- "downloaded " . basename($file) . " but the SID does not ".
- "exist in the local file, ignoring rule\n")
- if ($config{verbose});
-
- next RULELOOP;
- }
-
- print OUTFILE $$rh_tmp_ref{old}{rules}{basename($file)}{$sid};
- $sids{$sid}{printed} = 1;
-
- warn("SID $sid is marked as local, keeping your version from ".
- basename($file) . ".\n".
- "Your version: $$rh_tmp_ref{old}{rules}{basename($file)}{$sid}".
- "Downloaded version: $multi\n")
- if ($config{verbose});
-
- next RULELOOP;
- }
-
- my %rule = (
- single => $single,
- multi => $multi,
- );
-
- # modify/disable/enable this rule. Possible verbose messages and warnings
- # will not be printed (again) as this was done in the first phase.
- # We send the stats to a dummy var as this was collected on the
- # first phase as well.
- process_rule($modify_sid_ref, $disable_sid_ref, $enable_sid_ref,
- \%rule, $sid, \my %unused_stats, 0, basename($file));
-
- $single = $rule{single};
- $multi = $rule{multi};
-
- # Disabled rules are printed right back to the file, unless
- # there also is an active rule with the same sid. Als o make
- # sure we only print the sid once, even though it's disabled.
- if ($multi =~ /^#/ && !exists($sids{$sid}) && !exists($sids{$sid}{printed})) {
- print OUTFILE $multi;
- $sids{$sid}{printed} = 1;
- next RULELOOP;
- }
-
- # If this sid has not yet been printed and this is the place where
- # the sid with the highest rev was, print the rule to the file.
- # (There can be multiple totally different rules with the same sid
- # and we don't want to put the wrong rule in the wrong place.
- if (!exists($sids{$sid}{printed}) && $single eq $sids{$sid}{single}) {
- print OUTFILE $multi;
- $sids{$sid}{printed} = 1;
- }
- }
-
- close(OUTFILE);
- }
-
- print STDERR "disabled $stats{disabled}, enabled $stats{enabled}, ".
- "modified $stats{modified}, total=$stats{total}\n"
- unless ($config{quiet});
-
- # Print warnings on attempt at enablesid/disablesid/localsid on non-existent
- # rule if we're in verbose mode.
- if ($config{verbose}) {
- foreach my $sid (keys(%$enable_sid_ref)) {
- warn("WARNING: attempt to use \"enablesid\" on non-existent SID $sid\n")
- unless (exists($sids{$sid}));
- }
-
- foreach my $sid (keys(%$disable_sid_ref)) {
- warn("WARNING: attempt to use \"disablesid\" on non-existent SID $sid\n")
- unless (exists($sids{$sid}));
- }
-
- foreach my $sid (keys(%$local_sid_ref)) {
- warn("WARNING: attempt to use \"localsid\" on non-existent SID $sid\n")
- unless (exists($sids{$sid}));
- }
- }
-
- # Print warnings on attempt at modifysid'ing non-existent stuff, unless quiet mode.
- unless ($config{quiet}) {
- my %new_files;
- foreach my $file (sort(keys(%$newfiles_ref))) {
- $new_files{basename($file)} = 1;
- }
-
- my %mod_tmp;
- foreach my $mod_expr (@$modify_sid_ref) {
- my ($type, $arg) = ($mod_expr->[2], $mod_expr->[3]);
- $mod_tmp{$type}{$arg} = 1;
- }
-
- foreach my $sid (keys(%{$mod_tmp{sid}})) {
- warn("WARNING: attempt to use \"modifysid\" on non-existent SID $sid\n")
- unless (exists($sids{$sid}));
- }
-
- foreach my $file (keys(%{$mod_tmp{file}})) {
- warn("WARNING: attempt to use \"modifysid\" on non-existent file $file\n")
- unless(exists($new_files{$file}));
- }
- }
-
- # Return total number of valid rules.
- return ($stats{total});
-}
-
-
-
-# Process (modify/enable/disable) a rule as requested.
-sub process_rule($ $ $ $ $ $ $ $)
-{
- my $modify_sid_ref = shift;
- my $disable_sid_ref = shift;
- my $enable_sid_ref = shift;
- my $rule_ref = shift;
- my $sid = shift;
- my $stats_ref = shift;
- my $print_messages = shift;
- my $filename = shift;
-
- # Just for easier access.
- my $single = $$rule_ref{single};
- my $multi = $$rule_ref{multi};
-
- # Some rules may be commented out by default.
- # Enable them if -e is specified (both single-line and multi-line,
- # version, because we don't know which version one we're going to
- # use below.
- # Enable them if -e is specified.
- if ($multi =~ /^#/ && $config{enable_all}) {
- $multi =~ s/^#*//;
- $multi =~ s/\n#*/\n/g;
- $single =~ s/^#*//;
- $$stats_ref{enabled}++;
- }
-
- # Modify rule if requested. For disablesid/enablesid we work
- # on the multi-line version of the rule (if exists). For
- # modifysid that's no good since we don't know where in the
- # rule the trailing backslashes and newlines are going to be
- # and we don't want them to affect the regexp.
- MOD_EXP:foreach my $mod_expr (@$modify_sid_ref) {
- my ($subst, $repl, $type, $arg) =
- ($mod_expr->[0], $mod_expr->[1], $mod_expr->[2], $mod_expr->[3]);
-
- my $print_modify_warnings = 0;
- $print_modify_warnings = 1 if (!$config{super_quiet} && $print_messages && $type eq "sid");
-
- if ($type eq "wildcard" || ($type eq "sid" && $sid eq $arg) ||
- ($type eq "file" && $filename eq $arg)) {
-
- if ($single =~ /$subst/si) {
- print STDERR "Modifying rule, SID=$sid, filename=$filename, ".
- "match type=$type, subst=$subst, ".
- "repl=$repl\nBefore: $single"
- if ($print_messages && $config{verbose});
-
-
- # If user specified a backreference but the regexp did not set $1 - don't modify rule.
- if (!defined($1) && ($repl =~ /[^\\]\$\d+/ || $repl =~ /[^\\]\$\{\d+\}/
- || $repl =~ /^qq\/\$\d+/ || $repl =~ /^qq\/\$\{\d+\}/)) {
- warn("WARNING: SID $sid matches modifysid expression \"$subst\" but ".
- "backreference variable \$1 is undefined after match, ".
- "keeping original rule\n")
- if ($print_modify_warnings);
- next MOD_EXP;
- }
-
- # Do the substitution on the single-line version and put it
- # back in $multi.
- $single =~ s/$subst/$repl/eei;
- $multi = $single;
-
- print STDERR "After: $single\n"
- if ($print_messages && $config{verbose});
-
- $$stats_ref{modified}++;
- } else {
- if ($print_modify_warnings) {
- warn("WARNING: SID $sid does not match modifysid ".
- "expression \"$subst\", keeping original rule\n");
- }
- }
- }
- }
-
- # Disable rule if requested and it's not already disabled.
- if (exists($$disable_sid_ref{$sid}) && $multi !~ /^\s*#/) {
- $multi = "#$multi";
- $multi =~ s/\n([^#].+)/\n#$1/g;
- $$stats_ref{disabled}++;
- }
-
- # Enable rule if requested and it's not already enabled.
- if (exists($$enable_sid_ref{$sid}) && $multi =~ /^\s*#/) {
- $multi =~ s/^#+//;
- $multi =~ s/\n#+(.+)/\n$1/g;
- $$stats_ref{enabled}++;
- }
-
- $$rule_ref{single} = $single;
- $$rule_ref{multi} = $multi;
-}
-
-
-
-# Setup rules hash.
-# Format for rules will be: rh{old|new}{rules{filename}{sid} = single-line rule
-# Format for non-rules will be: rh{old|new}{other}{filename} = array of lines
-# List of added files will be stored as rh{added_files}{filename}
-sub setup_rules_hash($ $)
-{
- my $new_files_ref = shift;
- my $output_dir = shift;
-
- my (%rh, %old_sids);
-
- print STDERR "Setting up rules structures... "
- unless ($config{quiet});
-
- foreach my $file (sort(keys(%$new_files_ref))) {
- warn("\nWARNING: downloaded rules file $file is empty\n")
- if (!-s "$file" && $config{verbose});
-
- open(NEWFILE, "<", "$file")
- or clean_exit("could not open $file for reading: $!");
- my @newfile = <NEWFILE>;
- close(NEWFILE);
-
- # From now on we don't care about the path, so remove it.
- $file = basename($file);
-
- my ($single, $multi, $nonrule, $msg, $sid);
-
- while (get_next_entry(\@newfile, \$single, \$multi, \$nonrule, \$msg, \$sid)) {
- if (defined($single)) {
- $rh{new}{rules}{"$file"}{"$sid"} = $single;
- } else {
- push(@{$rh{new}{other}{"$file"}}, $nonrule);
- }
- }
-
- # Also read in old (aka local) file if it exists.
- # We do a sid dup check in these files.
- if (-f "$output_dir/$file") {
- open(OLDFILE, "<", "$output_dir/$file")
- or clean_exit("could not open $output_dir/$file for reading: $!");
- my @oldfile = <OLDFILE>;
- close(OLDFILE);
-
- while (get_next_entry(\@oldfile, \$single, \$multi, \$nonrule, undef, \$sid)) {
- if (defined($single)) {
- warn("\nWARNING: duplicate SID in your local rules, SID ".
- "$sid exists multiple times, you may need to fix this manually!\n")
- if (exists($old_sids{$sid}));
-
- $rh{old}{rules}{"$file"}{"$sid"} = $single;
- $old_sids{$sid}++;
- } else {
- push(@{$rh{old}{other}{"$file"}}, $nonrule);
- }
- }
- } else {
- $rh{added_files}{"$file"}++;
- }
- }
-
- print STDERR "done.\n"
- unless ($config{quiet});
-
- return (%rh);
-}
-
-
-
-# Return lines that exist only in first array but not in second one.
-sub get_first_only($ $ $)
-{
- my $first_only_ref = shift;
- my $first_arr_ref = shift;
- my $second_arr_ref = shift;
- my %arr_hash;
-
- @arr_hash{@$second_arr_ref} = ();
-
- foreach my $line (@$first_arr_ref) {
-
- # Skip blank lines and CVS Id tags.
- next unless ($line =~ /\S/);
- next if ($line =~ /^\s*#+\s*\$I\S:.+Exp\s*\$/);
-
- push(@$first_only_ref, $line)
- unless(exists($arr_hash{$line}));
- }
-}
-
-
-
-# Backup files in output dir matching $config{update_files} into the backup dir.
-sub make_backup($ $)
-{
- my $src_dir = shift; # dir with the rules to be backed up
- my $dest_dir = shift; # where to put the backup tarball
-
- my ($sec, $min, $hour, $mday, $mon, $year) = (localtime)[0 .. 5];
-
- my $date = sprintf("%4d%02d%02d-%02d%02d%02d",
- $year + 1900, $mon + 1, $mday, $hour, $min, $sec);
-
- my $backup_tarball = "rules-backup-$date.tar";
- my $backup_tmp_dir = File::Spec->catdir("$tmpdir", "rules-backup-$date");
- my $dest_file = File::Spec->catfile("$dest_dir", "$backup_tarball.gz");
-
- print STDERR "Creating backup of old rules..."
- unless ($config{quiet});
-
- mkdir("$backup_tmp_dir", 0700)
- or clean_exit("could not create temporary backup directory $backup_tmp_dir: $!");
-
- # Copy all rules files from the rules dir to the temporary backup dir.
- opendir(OLDRULES, "$src_dir")
- or clean_exit("could not open directory $src_dir: $!");
-
- while ($_ = readdir(OLDRULES)) {
- next if (/^\.\.?$/);
- if (/$config{update_files}/) {
- my $src_file = untaint_path("$src_dir/$_");
- copy("$src_file", "$backup_tmp_dir/")
- or warn("WARNING: could not copy $src_file to $backup_tmp_dir/: $!");
- }
- }
-
- closedir(OLDRULES);
-
- # Also backup the -U <file> (as "variable-file.conf") if specified.
- if ($config{update_vars}) {
- copy("$config{varfile}", "$backup_tmp_dir/variable-file.conf")
- or warn("WARNING: could not copy $config{varfile} to $backup_tmp_dir: $!")
- }
-
- my $old_dir = untaint_path(File::Spec->rel2abs(File::Spec->curdir()));
-
- # Change directory to $tmpdir (so we'll be right below the directory where
- # we have our rules to be backed up).
- chdir("$tmpdir") or clean_exit("could not change directory to $tmpdir: $!");
-
- if ($config{use_external_bins}) {
- clean_exit("tar command returned error when archiving backup files.\n")
- if (system("tar","cf","$backup_tarball","rules-backup-$date"));
-
- clean_exit("gzip command returned error when compressing backup file.\n")
- if (system("gzip","$backup_tarball"));
-
- $backup_tarball .= ".gz";
-
- } else {
- my $tar = Archive::Tar->new;
- opendir(RULES, "rules-backup-$date")
- or clean_exit("unable to open directory \"rules-backup-$date\": $!");
-
- while ($_ = readdir(RULES)) {
- next if (/^\.\.?$/);
- $tar->add_files("rules-backup-$date/$_");
- }
-
- closedir(RULES);
-
- $backup_tarball .= ".gz";
-
- # Write tarball. Print stupid error message if it fails as
- # we can't use $tar->error or Tar::error on all platforms.
- $tar->write("$backup_tarball", 1);
-
- clean_exit("could not create backup archive: tarball empty after creation\n")
- unless (-s "$backup_tarball");
- }
-
- # Change back to old directory (so it will work with -b <directory> as either
- # an absolute or a relative path.
- chdir("$old_dir")
- or clean_exit("could not change directory back to $old_dir: $!");
-
- copy("$tmpdir/$backup_tarball", "$dest_file")
- or clean_exit("unable to copy $tmpdir/$backup_tarball to $dest_file/: $!\n");
-
- print STDERR " saved as $dest_file.\n"
- unless ($config{quiet});
-}
-
-
-
-# Print the results.
-sub print_changes($ $)
-{
- my $ch_ref = shift;
- my $rh_ref = shift;
-
- my ($sec, $min, $hour, $mday, $mon, $year) = (localtime)[0 .. 5];
-
- my $date = sprintf("%4d%02d%02d %02d:%02d:%02d",
- $year + 1900, $mon + 1, $mday, $hour, $min, $sec);
-
- print "\n[***] Results from Oinkmaster started $date [***]\n";
-
- # Print new variables.
- if ($config{update_vars}) {
- if ($#{$$ch_ref{new_vars}} > -1) {
- print "\n[*] New variables: [*]\n";
- foreach my $var (@{$$ch_ref{new_vars}}) {
- print " $var";
- }
- } else {
- print "\n[*] New variables: [*]\n None.\n"
- unless ($config{super_quiet});
- }
- }
-
-
- # Print rules modifications.
- print "\n[*] Rules modifications: [*]\n None.\n"
- if (!keys(%{$$ch_ref{rules}}) && !$config{super_quiet});
-
- # Print added rules.
- if (exists($$ch_ref{rules}{added})) {
- print "\n[+++] Added rules: [+++]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{added}}, $rh_ref);
- } else {
- print_changetype($PRINT_NEW, "Added to",
- \%{$$ch_ref{rules}{added}}, $rh_ref);
- }
- }
-
- # Print enabled rules.
- if (exists($$ch_ref{rules}{ena})) {
- print "\n[+++] Enabled rules: [+++]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{ena}}, $rh_ref);
- } else {
- print_changetype($PRINT_NEW, "Enabled in",
- \%{$$ch_ref{rules}{ena}}, $rh_ref);
- }
- }
-
- # Print enabled + modified rules.
- if (exists($$ch_ref{rules}{ena_mod})) {
- print "\n[+++] Enabled and modified rules: [+++]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{ena_mod}}, $rh_ref);
- } else {
- print_changetype($PRINT_BOTH, "Enabled and modified in",
- \%{$$ch_ref{rules}{ena_mod}}, $rh_ref);
- }
- }
-
- # Print modified active rules.
- if (exists($$ch_ref{rules}{mod_act})) {
- print "\n[///] Modified active rules: [///]\n";
-
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{mod_act}}, $rh_ref);
- } else {
- print_changetype($PRINT_BOTH, "Modified active in",
- \%{$$ch_ref{rules}{mod_act}}, $rh_ref);
- }
- }
-
- # Print modified inactive rules.
- if (exists($$ch_ref{rules}{mod_ina})) {
- print "\n[///] Modified inactive rules: [///]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{mod_ina}}, $rh_ref);
- } else {
- print_changetype($PRINT_BOTH, "Modified inactive in",
- \%{$$ch_ref{rules}{mod_ina}}, $rh_ref);
- }
- }
-
- # Print disabled + modified rules.
- if (exists($$ch_ref{rules}{dis_mod})) {
- print "\n[---] Disabled and modified rules: [---]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{dis_mod}}, $rh_ref);
- } else {
- print_changetype($PRINT_BOTH, "Disabled and modified in",
- \%{$$ch_ref{rules}{dis_mod}}, $rh_ref);
- }
- }
-
- # Print disabled rules.
- if (exists($$ch_ref{rules}{dis})) {
- print "\n[---] Disabled rules: [---]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{dis}}, $rh_ref);
- } else {
- print_changetype($PRINT_NEW, "Disabled in",
- \%{$$ch_ref{rules}{dis}}, $rh_ref);
- }
- }
-
- # Print removed rules.
- if (exists($$ch_ref{rules}{removed})) {
- print "\n[---] Removed rules: [---]\n";
- if ($config{summary_output}) {
- print_summary_change(\%{$$ch_ref{rules}{removed}}, $rh_ref);
- } else {
- print_changetype($PRINT_OLD, "Removed from",
- \%{$$ch_ref{rules}{removed}}, $rh_ref);
- }
- }
-
-
- # Print non-rule modifications.
- print "\n[*] Non-rule line modifications: [*]\n None.\n"
- if (!keys(%{$$ch_ref{other}}) && !$config{super_quiet});
-
- # Print added non-rule lines.
- if (exists($$ch_ref{other}{added})) {
- print "\n[+++] Added non-rule lines: [+++]\n";
- foreach my $file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{other}{added}}))) {
- my $num = $#{$$ch_ref{other}{added}{$file}} + 1;
- print "\n -> Added to $file ($num):\n";
- foreach my $line (@{$$ch_ref{other}{added}{$file}}) {
- print " $line";
- }
- }
- }
-
- # Print removed non-rule lines.
- if (keys(%{$$ch_ref{other}{removed}}) > 0) {
- print "\n[---] Removed non-rule lines: [---]\n";
- foreach my $file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{other}{removed}}))) {
- my $num = $#{$$ch_ref{other}{removed}{$file}} + 1;
- print "\n -> Removed from $file ($num):\n";
- foreach my $other (@{$$ch_ref{other}{removed}{$file}}) {
- print " $other";
- }
- }
- }
-
-
- # Print list of added files.
- if (keys(%{$$ch_ref{added_files}})) {
- print "\n[+] Added files (consider updating your snort.conf to include them if needed): [+]\n\n";
- foreach my $added_file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{added_files}}))) {
- print " -> $added_file\n";
- }
- } else {
- print "\n[*] Added files: [*]\n None.\n"
- unless ($config{super_quiet} || $config{summary_output});
- }
-
- # Print list of possibly removed files if requested.
- if ($config{check_removed}) {
- if (keys(%{$$ch_ref{removed_files}})) {
- print "\n[-] Files possibly removed from the archive ".
- "(consider removing them from your snort.conf if needed): [-]\n\n";
- foreach my $removed_file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{removed_files}}))) {
- print " -> $removed_file\n";
- }
- } else {
- print "\n[*] Files possibly removed from the archive: [*]\n None.\n"
- unless ($config{super_quiet} || $config{summary_output});
- }
- }
-
- print "\n";
-}
-
-
-
-# Helper for print_changes().
-sub print_changetype($ $ $ $)
-{
- my $type = shift; # $PRINT_OLD|$PRINT_NEW|$PRINT_BOTH
- my $string = shift; # string to print before filename
- my $ch_ref = shift; # reference to an entry in the rules changes hash
- my $rh_ref = shift; # reference to rules hash
-
- foreach my $file (sort({uc($a) cmp uc($b)} keys(%$ch_ref))) {
- my $num = keys(%{$$ch_ref{$file}});
- print "\n -> $string $file ($num):\n";
- foreach my $sid (keys(%{$$ch_ref{$file}})) {
- if ($type == $PRINT_OLD) {
- print " $$rh_ref{old}{rules}{$file}{$sid}"
- } elsif ($type == $PRINT_NEW) {
- print " $$rh_ref{new}{rules}{$file}{$sid}"
- } elsif ($type == $PRINT_BOTH) {
-
- my $old = $$rh_ref{old}{rules}{$file}{$sid};
- my $new = $$rh_ref{new}{rules}{$file}{$sid};
-
- if ($config{minimize_diff}) {
- my ($old, $new) = minimize_diff($old, $new);
- print "\n old SID $sid: $old";
- print " new SID $sid: $new";
- } else {
- print "\n old: $old";
- print " new: $new";
- }
- }
- }
- }
-}
-
-
-
-# Print changes in bmc style, i.e. only sid and msg, no full details.
-sub print_summary_change($ $)
-{
- my $ch_ref = shift; # reference to an entry in the rules changes hash
- my $rh_ref = shift; # reference to rules hash
-
- my (@sids, %sidmap);
-
- print "\n";
-
- # First get all the sids (may be spread across multiple files.
- foreach my $file (keys(%$ch_ref)) {
- foreach my $sid (keys(%{$$ch_ref{$file}})) {
- push(@sids, $sid);
- if (exists($$rh_ref{new}{rules}{$file}{$sid})) {
- $sidmap{$sid}{rule} = $$rh_ref{new}{rules}{$file}{$sid};
- } else {
- $sidmap{$sid}{rule} = $$rh_ref{old}{rules}{$file}{$sid};
- }
- $sidmap{$sid}{file} = $file;
- }
- }
-
- # Print rules, sorted by sid.
- foreach my $sid (sort {$a <=> $b} (@sids)) {
- my @rule = $sidmap{$sid}{rule};
- my $file = $sidmap{$sid}{file};
- get_next_entry(\@rule, undef, undef, undef, \(my $msg), undef);
- printf("%8d - %s (%s)\n", $sid, $msg, $file);
- }
-
- print "\n";
-}
-
-
-
-# Compare the new rules to the old ones.
-sub get_changes($ $ $)
-{
- my $rh_ref = shift;
- my $new_files_ref = shift;
- my $rules_dir = shift;
- my %changes;
-
- print STDERR "Comparing new files to the old ones... "
- unless ($config{quiet});
-
- # We have the list of added files (without full path) in $rh_ref{added_files}
- # but we'd rather want to have it in $changes{added_files} now.
- $changes{added_files} = $$rh_ref{added_files};
-
- # New files are also regarded as modified since we want to update
- # (i.e. add) those as well. Here we want them with full path.
- foreach my $file (keys(%{$changes{added_files}})) {
- $changes{modified_files}{"$tmpdir/$rules_dir/$file"}++;
- }
-
- # Add list of possibly removed files if requested.
- if ($config{check_removed}) {
- opendir(OLDRULES, "$config{output_dir}")
- or clean_exit("could not open directory $config{output_dir}: $!");
-
- while ($_ = readdir(OLDRULES)) {
- next if (/^\.\.?$/);
- $changes{removed_files}{"$_"} = 1
- if (/$config{update_files}/ &&
- !exists($config{file_ignore_list}{$_}) &&
- !-e "$tmpdir/$rules_dir/$_");
- }
-
- closedir(OLDRULES);
- }
-
- # For each new rules file...
- FILELOOP:foreach my $file_w_path (sort(keys(%$new_files_ref))) {
- my $file = basename($file_w_path);
-
- # Skip comparison if it's an added file.
- next FILELOOP if (exists($$rh_ref{added_files}{$file}));
-
- # For each sid in the new file...
- foreach my $sid (keys(%{$$rh_ref{new}{rules}{$file}})) {
- my $new_rule = $$rh_ref{new}{rules}{$file}{$sid};
-
- # Sid also exists in the old file?
- if (exists($$rh_ref{old}{rules}{$file}{$sid})) {
- my $old_rule = $$rh_ref{old}{rules}{$file}{$sid};
-
- # Are they identical?
- unless ($new_rule eq $old_rule) {
- $changes{modified_files}{$file_w_path}++;
-
- # Find out in which way the rules are different.
- if ("#$old_rule" eq $new_rule) {
- $changes{rules}{dis}{$file}{$sid}++;
- } elsif ($old_rule eq "#$new_rule") {
- $changes{rules}{ena}{$file}{$sid}++;
- } elsif ($old_rule =~ /^\s*#/ && $new_rule !~ /^\s*#/) {
- $changes{rules}{ena_mod}{$file}{$sid}++;
- } elsif ($old_rule !~ /^\s*#/ && $new_rule =~ /^\s*#/) {
- $changes{rules}{dis_mod}{$file}{$sid}++;
- } elsif ($old_rule =~ /^\s*#/ && $new_rule =~ /^\s*#/) {
- $changes{rules}{mod_ina}{$file}{$sid}++;
- } else {
- $changes{rules}{mod_act}{$file}{$sid}++;
- }
-
- }
- } else { # sid not found in old file, i.e. it's added
- $changes{modified_files}{$file_w_path}++;
- $changes{rules}{added}{$file}{$sid}++;
- }
- } # foreach sid
-
- # Check for removed rules, i.e. sids that exist in the old file but
- # not in the new one.
- foreach my $sid (keys(%{$$rh_ref{old}{rules}{$file}})) {
- unless (exists($$rh_ref{new}{rules}{$file}{$sid})) {
- $changes{modified_files}{$file_w_path}++;
- $changes{rules}{removed}{$file}{$sid}++;
- }
- }
-
- # Check for added non-rule lines.
- get_first_only(\my @added,
- \@{$$rh_ref{new}{other}{$file}},
- \@{$$rh_ref{old}{other}{$file}});
-
- if (scalar(@added)) {
- @{$changes{other}{added}{$file}} = @added;
- $changes{modified_files}{$file_w_path}++;
- }
-
- # Check for removed non-rule lines.
- get_first_only(\my @removed,
- \@{$$rh_ref{old}{other}{$file}},
- \@{$$rh_ref{new}{other}{$file}});
-
- if (scalar(@removed)) {
- @{$changes{other}{removed}{$file}} = @removed;
- $changes{modified_files}{$file_w_path}++;
- }
-
- } # foreach new file
-
- print STDERR "done.\n" unless ($config{quiet});
-
- return (%changes);
-}
-
-
-
-# Simply copy the modified rules files to the output directory.
-sub update_rules($ @)
-{
- my $dst_dir = shift;
- my @modified_files = @_;
-
- print STDERR "Updating local rules files... "
- if (!$config{quiet} || $config{interactive});
-
- foreach my $file_w_path (@modified_files) {
- copy("$file_w_path", "$dst_dir")
- or clean_exit("could not copy $file_w_path to $dst_dir: $!");
- }
-
- print STDERR "done.\n"
- if (!$config{quiet} || $config{interactive});
-}
-
-
-# Simply copy rules files from one dir to another.
-# Links are not allowed.
-sub copy_rules($ $)
-{
- my $src_dir = shift;
- my $dst_dir = shift;
-
- print STDERR "Copying rules from $src_dir... "
- if (!$config{quiet} || $config{interactive});
-
- opendir(SRC_DIR, $src_dir)
- or clean_exit("could not open directory $src_dir: $!");
-
- my $num_files = 0;
- while ($_ = readdir(SRC_DIR)) {
- next if (/^\.\.?$/ || exists($config{file_ignore_list}{$_})
- || !/$config{update_files}/);
-
- my $src_file = untaint_path("$src_dir/$_");
-
- # Make sure it's a regular file.
- unless (-f "$src_file" && !-l "$src_file") {
- closedir(SRC_DIR);
- clean_exit("\"$src_file\" is not a regular file.")
- }
-
- unless (copy($src_file, $dst_dir)) {
- closedir(SRC_DIR);
- clean_exit("could not copy \"$src_file\" to \"$dst_dir\"/: $!");
- }
- $num_files++;
- }
-
- closedir(SRC_DIR);
-
- print STDERR "$num_files files copied.\n"
- if (!$config{quiet} || $config{interactive});
-}
-
-
-
-# Return true if file is in PATH and is executable.
-sub is_in_path($)
-{
- my $file = shift;
-
- foreach my $dir (File::Spec->path()) {
- if ((-f "$dir/$file" && -x "$dir/$file")
- || (-f "$dir/$file.exe" && -x "$dir/$file.exe")) {
- print STDERR "Found $file binary in $dir\n"
- if ($config{verbose});
- return (1);
- }
- }
-
- return (0);
-}
-
-
-
-# get_next_entry() will parse the array referenced in the first arg
-# and return the next entry. The array should contain a rules file,
-# and the returned entry will be removed from the array.
-# An entry is one of:
-# - single-line rule (put in 2nd ref)
-# - multi-line rule (put in 3rd ref)
-# - non-rule line (put in 4th ref)
-# If the entry is a multi-line rule, its single-line version is also
-# returned (put in the 2nd ref).
-# If it's a rule, the msg string will be put in 4th ref and sid in 5th.
-sub get_next_entry($ $ $ $ $ $)
-{
- my $arr_ref = shift;
- my $single_ref = shift;
- my $multi_ref = shift;
- my $nonrule_ref = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- undef($$single_ref);
- undef($$multi_ref);
- undef($$nonrule_ref);
- undef($$msg_ref);
- undef($$sid_ref);
-
- my $line = shift(@$arr_ref) || return(0);
- my $disabled = 0;
- my $broken = 0;
-
- chomp($line);
- $line .= "\n";
-
- # Possible beginning of multi-line rule?
- if ($line =~ /$MULTILINE_RULE_REGEXP/oi) {
- $$single_ref = $line;
- $$multi_ref = $line;
-
- $disabled = 1 if ($line =~ /^\s*#/);
-
- # Keep on reading as long as line ends with "\".
- while (!$broken && $line =~ /\\\s*\n$/) {
-
- # Remove trailing "\" and newline for single-line version.
- $$single_ref =~ s/\\\s*\n//;
-
- # If there are no more lines, this can not be a valid multi-line rule.
- if (!($line = shift(@$arr_ref))) {
-
- warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n")
- if ($config{verbose});
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
-
- # Multi-line continuation.
- $$multi_ref .= $line;
-
- # If there are non-comment lines in the middle of a disabled rule,
- # mark the rule as broken to return as non-rule lines.
- if ($line !~ /^\s*#/ && $disabled) {
- $broken = 1;
- } elsif ($line =~ /^\s*#/ && !$disabled) {
- # comment line (with trailing slash) in the middle of an active rule - ignore it
- } else {
- $line =~ s/^\s*#*\s*//; # remove leading # in single-line version
- $$single_ref .= $line;
- }
-
- } # while line ends with "\"
-
- # Single-line version should now be a valid rule.
- # If not, it wasn't a valid multi-line rule after all.
- if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) {
-
- $$single_ref =~ s/^\s*//; # remove leading whitespaces
- $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading #
- $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- $$multi_ref =~ s/^\s*//;
- $$multi_ref =~ s/\s*\n$/\n/;
- $$multi_ref =~ s/^#+\s*/#/;
-
- return (1); # return multi
-
- # Invalid multi-line rule.
- } else {
- warn("\nWARNING: invalid multi-line rule: $$single_ref\n")
- if ($config{verbose} && $$multi_ref !~ /^\s*#/);
-
- @_ = split(/\n/, $$multi_ref);
-
- undef($$multi_ref);
- undef($$single_ref);
-
- # First line of broken multi-line rule will be returned as a non-rule line.
- $$nonrule_ref = shift(@_) . "\n";
- $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces
-
- # The rest is put back to the array again.
- foreach $_ (reverse((@_))) {
- unshift(@$arr_ref, "$_\n");
- }
-
- return (1); # return non-rule
- }
-
- # Check if it's a regular single-line rule.
- } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) {
- $$single_ref = $line;
- $$single_ref =~ s/^\s*//;
- $$single_ref =~ s/^#+\s*/#/;
- $$single_ref =~ s/\s*\n$/\n/;
-
- return (1); # return single
-
- # Non-rule line.
- } else {
-
- # Do extra check and warn if it *might* be a rule anyway,
- # but that we just couldn't parse for some reason.
- warn("\nWARNING: line may be a rule but it could not be parsed ".
- "(missing sid?): $line\n")
- if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/);
-
- $$nonrule_ref = $line;
- $$nonrule_ref =~ s/\s*\n$/\n/;
-
- return (1); # return non-rule
- }
-}
-
-
-
-# Look for variables that exist in dist var files but not in local var file.
-sub get_new_vars($ $ $ $)
-{
- my $ch_ref = shift;
- my $dist_var_files_ref = shift;
- my $local_var_file = shift;
- my $url_tmpdirs_ref = shift;
-
- my %new_vars;
- my (%old_vars, %dist_var_files, %found_dist_var_files);
- my $confs_found = 0;
-
-
- # Warn in case we can't find a specified dist file.
- foreach my $dir (@$url_tmpdirs_ref) {
- foreach my $dist_var_file (@$dist_var_files_ref) {
- if (-e "$dir/$dist_var_file") {
- $found_dist_var_files{$dist_var_file} = 1;
- $confs_found++;
- }
- }
- }
-
- foreach my $dist_var_file (@$dist_var_files_ref) {
- unless (exists($found_dist_var_files{$dist_var_file})) {
- warn("WARNING: did not find variable file \"$dist_var_file\" in ".
- "downloaded archive(s)\n")
- unless($config{quiet});
- }
- }
-
- unless ($confs_found) {
- unless ($config{quiet}) {
- warn("WARNING: no variable files found in downloaded archive(s), ".
- "aborting check for new variables\n");
- return;
- }
- }
-
- # Read in variable names from old (target) var file.
- open(LOCAL_VAR_FILE, "<", "$local_var_file")
- or clean_exit("could not open $local_var_file for reading: $!");
-
- my @local_var_conf = <LOCAL_VAR_FILE>;
-
- foreach $_ (join_multilines(\@local_var_conf)) {
- $old_vars{lc($1)}++ if (/$VAR_REGEXP/i);
- }
-
- close(LOCAL_VAR_FILE);
-
- # Read in variables from new file(s).
- foreach my $dir (@$url_tmpdirs_ref) {
- foreach my $dist_var_file (@$dist_var_files_ref) {
- my $conf = "$dir/$dist_var_file";
- if (-e "$conf") {
- my $num_new = 0;
- print STDERR "Checking downloaded $dist_var_file for new variables... "
- unless ($config{quiet});
-
- open(DIST_CONF, "<", "$conf")
- or clean_exit("could not open $conf for reading: $!");
- my @dist_var_conf = <DIST_CONF>;
- close(DIST_CONF);
-
- foreach $_ (join_multilines(\@dist_var_conf)) {
- if (/$VAR_REGEXP/i && !exists($old_vars{lc($1)})) {
- my ($varname, $varval) = (lc($1), $2);
- if (exists($new_vars{$varname})) {
- warn("\nWARNING: new variable \"$varname\" is defined multiple ".
- "times in downloaded files\n");
- }
- s/^\s*//;
- push(@{$$ch_ref{new_vars}}, "$_\n");
- $new_vars{$varname} = $varval;
- $num_new++;
- }
- }
-
- close(DIST_CONF);
- print STDERR "$num_new new found.\n"
- unless ($config{quiet});
- }
- }
- }
-}
-
-
-
-# Add new variables to local snort.conf.
-sub add_new_vars($ $)
-{
- my $ch_ref = shift;
- my $varfile = shift;
- my $tmp_varfile = "$tmpdir/tmp_varfile.conf";
- my $new_content;
-
- return unless ($#{$changes{new_vars}} > -1);
-
- print STDERR "Adding new variables to $varfile... "
- unless ($config{quiet});
-
- open(OLD_LOCAL_CONF, "<", "$varfile")
- or clean_exit("could not open $varfile for reading: $!");
- my @old_content = <OLD_LOCAL_CONF>;
- close(OLD_LOCAL_CONF);
-
- open(NEW_LOCAL_CONF, ">", "$tmp_varfile")
- or clean_exit("could not open $tmp_varfile for writing: $!");
-
- my @old_vars = grep(/$VAR_REGEXP/i, @old_content);
-
-
- # If any vars exist in old file, put new vars right after them.
- if ($#old_vars > -1) {
- while ($_ = shift(@old_content)) {
- print NEW_LOCAL_CONF $_;
- last if ($_ eq $old_vars[$#old_vars]);
- }
- }
-
- print NEW_LOCAL_CONF @{$changes{new_vars}};
- print NEW_LOCAL_CONF @old_content;
-
- close(NEW_LOCAL_CONF);
-
- clean_exit("could not copy $tmp_varfile to $varfile: $!")
- unless (copy("$tmp_varfile", "$varfile"));
-
- print STDERR "done.\n"
- unless ($config{quiet});
-}
-
-
-
-# Convert msdos style path to cygwin style, e.g.
-# c:\foo => /cygdrive/c/foo
-sub msdos_to_cygwin_path($)
-{
- my $path_ref = shift;
-
- if ($$path_ref =~ /^([a-zA-Z]):[\/\\](.*)/) {
- my ($drive, $dir) = ($1, $2);
- $dir =~ s/\\/\//g;
- $$path_ref = "/cygdrive/$drive/$dir";
- return (1);
- }
-
- return (0);
-}
-
-
-
-# Parse and process a modifysid expression.
-# Return 1 if valid, or otherwise 0.
-sub parse_mod_expr($ $ $ $)
-{
- my $mod_list_ref = shift; # where to store valid entries
- my $sid_arg_list = shift; # comma-separated list of SIDs/files or wildcard
- my $subst = shift; # regexp to look for
- my $repl = shift; # regexp to replace it with
-
- my @tmp_mod_list;
-
- $sid_arg_list =~ s/\s+$//;
-
- foreach my $sid_arg (split(/\s*,\s*/, $sid_arg_list)) {
- my $type = "";
-
- $type = "sid" if ($sid_arg =~ /^\d+$/);
- $type = "file" if ($sid_arg =~ /^\S+.*\.\S+$/);
- $type = "wildcard" if ($sid_arg eq "*");
-
- return (0) unless ($type);
-
- # Sanity check to make sure user escaped at least all the "$" in $subst.
- if ($subst =~ /[^\\]\$./ || $subst =~ /^\$/) {
- warn("WARNING: unescaped \$ in expression \"$subst\", all special ".
- "characters must be escaped\n");
- return (0);
- }
-
- # Only allow backreference variables. The check should at least catch some user typos.
- if (($repl =~ /[^\\]\$(\D.)/ && $1 !~ /{\d/) || $repl =~ /[^\\]\$$/
- || ($repl =~ /^\$(\D.)/ && $1 !~ /{\d/)) {
- warn("WARNING: illegal replacement expression \"$repl\": unescaped \$ ".
- "that isn't a backreference\n");
- return (0);
- }
-
- # Don't permit unescaped @.
- if ($repl =~ /[^\\]\@/ || $repl =~ /^\@/) {
- warn("WARNING: illegal replacement expression \"$repl\": unescaped \@\n");
- return (0);
- }
-
- # Make sure the regexp is valid.
- my $repl_qq = "qq/$repl/";
- my $dummy = "foo";
-
- eval {
- $dummy =~ s/$subst/$repl_qq/ee;
- };
-
- # We should probably check for warnings as well as errors...
- if ($@) {
- warn("Invalid regexp: $@");
- return (0);
- }
-
- push(@tmp_mod_list, [$subst, $repl_qq, $type, $sid_arg]);
- }
-
- # If we come this far, all sids and the regexp were parsed successfully, so
- # append them to real mod list array.
- foreach my $mod_entry (@tmp_mod_list) {
- push(@$mod_list_ref, $mod_entry);
- }
-
- return (1);
-}
-
-
-
-# Untaint a path. Die if it contains illegal chars.
-sub untaint_path($)
-{
- my $path = shift;
- my $orig_path = $path;
-
- return $path unless ($config{use_path_checks});
-
- (($path) = $path =~ /^([$OK_PATH_CHARS]+)$/)
- or clean_exit("illegal character in path/filename ".
- "\"$orig_path\", allowed are $OK_PATH_CHARS\n".
- "Fix this or set use_path_checks=0 in oinkmaster.conf ".
- "to disable this check completely if it is too strict.\n");
-
- return ($path);
-}
-
-
-
-# Ask user to approve changes. Return 1 for yes, 0 for no.
-sub approve_changes()
-{
- my $answer = "";
-
- while ($answer !~ /^[yn]/i) {
- print "Do you approve these changes? [Yn] ";
- $answer = <STDIN>;
- $answer = "y" unless ($answer =~ /\S/);
- }
-
- return ($answer =~ /^y/i);
-}
-
-
-
-# Remove common leading and trailing stuff from two rules.
-sub minimize_diff($ $)
-{
- my $old_rule = shift;
- my $new_rule = shift;
-
- my $original_old = $old_rule;
- my $original_new = $new_rule;
-
- # Additional chars to print next to the diffing part.
- my $additional_chars = 20;
-
- # Remove the rev keyword from the rules, as it often
- # makes the whole diff minimizing useless.
- $old_rule =~ s/\s*\b(rev\s*:\s*\d+\s*;)\s*//;
- my $old_rev = $1;
-
- $new_rule =~ s/\s*\b(rev\s*:\s*\d+\s*;)\s*//;
- my $new_rev = $1;
-
- # If rev was the only thing that changed, we want to restore the rev
- # before continuing so we don't remove common stuff from rules that
- # are identical.
- if ($old_rule eq $new_rule) {
- $old_rule = $original_old;
- $new_rule = $original_new;
- }
-
- # Temporarily remove possible leading # so it works nicely
- # with modified rules that are also being either enabled or disabled.
- my $old_is_disabled = 0;
- my $new_is_disabled = 0;
-
- $old_is_disabled = 1 if ($old_rule =~ s/^#//);
- $new_is_disabled = 1 if ($new_rule =~ s/^#//);
-
- # Go forward char by char until they aren't equeal.
- # $i will bet set to the index where they diff.
- my @old = split(//, $old_rule);
- my @new = split(//, $new_rule);
-
- my $i = 0;
- while ($i <= $#old && $i <= $#new && $old[$i] eq $new[$i]) {
- $i++;
- }
-
- # Now same thing but backwards.
- # $j will bet set to the index where they diff.
- @old = reverse(split(//, $old_rule));
- @new = reverse(split(//, $new_rule));
-
- my $j = 0;
- while ($j <= $#old && $j <= $#new && $old[$j] eq $new[$j]) {
- $j++;
- }
-
- # Print some additional chars on either side, if there is room for it.
- $i -= $additional_chars;
- $i = 0 if ($i < 0);
-
- $j = -$j + $additional_chars;
- $j = 0 if ($j > -1);
-
- my ($old, $new);
-
- # Print entire rules (i.e. they can not be shortened).
- if (!$i && !$j) {
- $old = $old_rule;
- $new = $new_rule;
-
- # Leading and trailing stuff can be removed.
- } elsif ($i && $j) {
- $old = "..." . substr($old_rule, $i, $j) . "...";
- $new = "..." . substr($new_rule, $i, $j) . "...";
-
- # Trailing stuff can be removed.
- } elsif (!$i && $j) {
- $old = substr($old_rule, $i, $j) . "...";
- $new = substr($new_rule, $i, $j) . "...";
-
- # Leading stuff can be removed.
- } elsif ($i && !$j) {
- $old = "..." . substr($old_rule, $i);
- $new = "..." . substr($new_rule, $i);
- }
-
- chomp($old, $new);
- $old .= "\n";
- $new .= "\n";
-
- # Restore possible leading # now.
- $old = "#$old" if ($old_is_disabled);
- $new = "#$new" if ($new_is_disabled);
-
- return ($old, $new);
-}
-
-
-
-# Check a string and return 1 if it's a valid single-line snort rule.
-# Msg string is put in second arg, sid in third (those are the only
-# required keywords, besides the leading rule actions).
-sub parse_singleline_rule($ $ $)
-{
- my $line = shift;
- my $msg_ref = shift;
- my $sid_ref = shift;
-
- undef($$msg_ref);
- undef($$sid_ref);
-
- if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) {
-
- if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) {
- $$msg_ref = $1;
- } else {
- return (0);
- }
-
- if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) {
- $$sid_ref = $1;
- } else {
- return (0);
- }
-
- return (1);
- }
-
- return (0);
-}
-
-
-
-# Merge multiline directives in an array by simply removing traling backslashes.
-sub join_multilines($)
-{
- my $multiline_conf_ref = shift;
- my $joined_conf = "";
-
- foreach $_ (@$multiline_conf_ref) {
- s/\\\s*\n$//;
- $joined_conf .= $_;
- }
-
- return (split/\n/, $joined_conf);
-}
-
-
-
-# Catch SIGINT.
-sub catch_sigint()
-{
- $SIG{INT} = 'IGNORE';
- print STDERR "\nInterrupted, cleaning up.\n";
- sleep(1);
- clean_exit("interrupted by signal");
-}
-
-
-
-# Remove temporary directory and exit.
-# If a non-empty string is given as argument, it will be regarded
-# as an error message and we will use die() with the message instead
-# of just exit(0).
-sub clean_exit($)
-{
- my $err_msg = shift;
-
- $SIG{INT} = 'DEFAULT';
-
- if (defined($tmpdir) && -d "$tmpdir") {
- chdir(File::Spec->rootdir());
- rmtree("$tmpdir", 0, 1);
- undef($tmpdir);
- }
-
- if (!defined($err_msg) || $err_msg eq "") {
- exit(0);
- } else {
- chomp($err_msg);
- die("\n$0: Error: $err_msg\n\nOink, oink. Exiting...\n");
- }
-}
-
-
-
-#### EOF ####
diff --git a/config/snort/bin/oinkmaster_contrib/snort_rename.pl b/config/snort/bin/oinkmaster_contrib/snort_rename.pl
deleted file mode 100644
index e5f0d39e..00000000
--- a/config/snort/bin/oinkmaster_contrib/snort_rename.pl
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/usr/bin/perl -w
-
-#usage: rename perl_expression [files]
-my $usage = qq{rename [-v] s/pat/repl/ [filenames...]\t (c)2001 hellweg\@snark.de
-rename files read from the commandline or stdin
-
-License to use, modify and redistribute granted to each and every lifeform on
-this planet (as long as credit to hellweg\@snark.de remains). No guarantee that
-'rename' does or does not perform the way you want...
-
-} ;
-$verbose = 0 ;
-$quiet = 0 ;
-
-$op=shift || 0 ;
-if($op eq "-v") {
- $verbose++ ; $quiet = 0 ;
- $op=shift || 0 ;
-}
-if($op eq "-q") {
- $quiet++ ; $verbose = 0 ;
- $op=shift || 0 ;
-}
-if($op =~ /^-h/) {
- print $usage; exit(0) ;
-}
-
-if(! $op) {
- print $usage; exit(-1) ;
-}
-
-if (!@ARGV) {
- @ARGV = <STDIN>;
-}
-
-$count=0 ;
-my($m, $d, $y, $T) ;
-for (@ARGV) {
- chomp ;
- if(-e $_) {
- $was = $_;
- if($op =~ /\$[Tdym]/) {
- my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst)=localtime((stat($_))[9]);
- $m = sprintf("%0.2i", $mon+1);
- $d = sprintf("%0.2i", $mday);
- $y = $year + 1900 ;
- $T = "$y$m$d" ;
- }
- eval $op;
- die $@ if $@;
- if(-f $_) { print("! exists already: $was -> $_ \n") unless $quiet ; }
- else {
- if(rename($was, $_)) {
- print("$was -> $_\n") if $verbose ;
- $count++;
- } else {
- if(/\//) {
- # maybe we need to create dirs?
- my $createRes = createDirs($_) ;
- if($createRes) {
- print("! fauled to create $createRes for $_\n")
- unless $quiet ;
- }
- else { # try again
- if(rename($was, $_)) {
- print("$was -> $_\n") if $verbose ;
- $count++;
- } else {
- print("! failed to rename $was -> $_ \n")
- unless $quiet ;
- }
- }
- }
- else {
- print("! failed to rename $was -> $_ \n") unless $quiet ;
- }
- }
- }
- }
- else { print("! not found: $_ \n") ; }
-}
-print("renamed $count files\n") if $verbose ;
-
-
-sub createDirs { # return the dir we failed to create or 0
- my $file = shift ;
- my @dirs = split /\//, $file ;
- pop @dirs ; # don't try to mkdir the file itself
- my $current = "" ;
- $current = "/" if ($file =~ /^\//) ;
- foreach (@dirs) {
- $current .= $_ ;
- if(! -d $current) {
- mkdir $current, 0700 || return $current ;
- print "mkdir $current\n" if ($verbose) ;
- }
- $current .= "/" ;
- }
- return 0 ; # success
-}
diff --git a/config/snort/snort.xml b/config/snort/snort.xml
index d6832e87..fa7f0099 100644
--- a/config/snort/snort.xml
+++ b/config/snort/snort.xml
@@ -79,16 +79,6 @@
<item>http://www.pfsense.com/packages/config/snort/bin/oinkmaster_contrib/create-sidmap.pl</item>
</additional_files_needed>
<additional_files_needed>
- <prefix>/usr/local/bin/</prefix>
- <chmod>077</chmod>
- <item>http://www.pfsense.com/packages/config/snort/bin/oinkmaster_contrib/oinkmaster.pl</item>
- </additional_files_needed>
- <additional_files_needed>
- <prefix>/usr/local/bin/</prefix>
- <chmod>077</chmod>
- <item>http://www.pfsense.com/packages/config/snort/bin/oinkmaster_contrib/snort_rename.pl</item>
- </additional_files_needed>
- <additional_files_needed>
<prefix>/usr/local/www/snort/</prefix>
<chmod>077</chmod>
<item>http://www.pfsense.com/packages/config/snort/snort_alerts.php</item>