diff options
Diffstat (limited to 'config/snort/snort_post_install.php')
| -rw-r--r-- | config/snort/snort_post_install.php | 1464 |
1 files changed, 1464 insertions, 0 deletions
diff --git a/config/snort/snort_post_install.php b/config/snort/snort_post_install.php new file mode 100644 index 00000000..a7b54503 --- /dev/null +++ b/config/snort/snort_post_install.php @@ -0,0 +1,1464 @@ +<?php +/* + * snort_post_install.php + * + * Copyright (C) 2006 Scott Ullrich + * Copyright (C) 2009-2010 Robert Zelaya + * Copyright (C) 2011-2012 Ermal Luci + * Copyright (C) 2013 Bill Meeks + * part of pfSense + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/****************************************************************************/ +/* This module is called once during the Snort package installation to */ +/* perform required post-installation setup. It should only be executed */ +/* from the Package Manager process via the custom-post-install hook in */ +/* the snort.xml package configuration file. */ +/****************************************************************************/ + +require_once("config.inc"); +require_once("functions.inc"); +require_once("/usr/local/pkg/snort/snort.inc"); + +global $config, $g, $rebuild_rules, $pkg_interface, $snort_gui_include; + +$snortdir = SNORTDIR; +$snortlibdir = SNORTLIBDIR; +$rcdir = RCFILEPREFIX; + +// This is a hack to workaround the caching of the old "snort.inc" by the +// Package Manager installation code. We need this new function which is +// in the new snort.inc file during post-installation. +if (!function_exists('snort_expand_port_range')) { + function snort_expand_port_range($ports, $delim = ',') { + // Split the incoming string on the specified delimiter + $tmp = explode($delim, $ports); + + // Look for any included port range and expand it + foreach ($tmp as $val) { + if (is_portrange($val)) { + $start = strtok($val, ":"); + $end = strtok(":"); + if ($end !== false) { + $val = $start . $delim; + for ($i = intval($start) + 1; $i < intval($end); $i++) + $val .= strval($i) . $delim; + $val .= $end; + } + } + $value .= $val . $delim; + } + + // Remove any trailing delimiter in return value + return trim($value, $delim); + } +} + +// This function mirrors the "snort_generate_conf()" function in the +// "snort.inc" file. It is here with a modified name as a workaround +// so that functionality built into the new package version can be +// implemented during installation. During a package reinstall, the +// Package Manager will cache the old version of "snort.inc" and thus +// new features are not available from the new "snort.inc" file in the +// new package. +function snort_build_new_conf($snortcfg) { + + global $config, $g, $rebuild_rules; + + $snortdir = SNORTDIR; + $snortlibdir = SNORTLIBDIR; + $snortlogdir = SNORTLOGDIR; + $flowbit_rules_file = FLOWBITS_FILENAME; + $snort_enforcing_rules_file = ENFORCING_RULES_FILENAME; + + if (!is_array($config['installedpackages']['snortglobal']['rule'])) + return; + + /* See if we should protect and not modify the preprocessor rules files */ + if (!empty($snortcfg['protect_preproc_rules'])) + $protect_preproc_rules = $snortcfg['protect_preproc_rules']; + else + $protect_preproc_rules = "off"; + + $if_real = snort_get_real_interface($snortcfg['interface']); + $snort_uuid = $snortcfg['uuid']; + $snortcfgdir = "{$snortdir}/snort_{$snort_uuid}_{$if_real}"; + + /* custom home nets */ + $home_net_list = snort_build_list($snortcfg, $snortcfg['homelistname']); + $home_net = implode(",", $home_net_list); + + $external_net = '!$HOME_NET'; + if (!empty($snortcfg['externallistname']) && $snortcfg['externallistname'] != 'default') { + $external_net_list = snort_build_list($snortcfg, $snortcfg['externallistname']); + $external_net = implode(",", $external_net_list); + } + + /* user added arguments */ + $snort_config_pass_thru = str_replace("\r", "", base64_decode($snortcfg['configpassthru'])); + // Remove the trailing newline + $snort_config_pass_thru = rtrim($snort_config_pass_thru); + + /* create a few directories and ensure the sample files are in place */ + $snort_dirs = array( $snortdir, $snortcfgdir, "{$snortcfgdir}/rules", + "{$snortlogdir}/snort_{$if_real}{$snort_uuid}", + "{$snortlogdir}/snort_{$if_real}{$snort_uuid}/barnyard2", + "{$snortcfgdir}/preproc_rules", + "dynamicrules" => "{$snortlibdir}/dynamicrules", + "dynamicengine" => "{$snortlibdir}/dynamicengine", + "dynamicpreprocessor" => "{$snortcfgdir}/dynamicpreprocessor" + ); + foreach ($snort_dirs as $dir) { + if (!is_dir($dir)) + safe_mkdir($dir); + } + + /********************************************************************/ + /* For fail-safe on an initial startup following installation, and */ + /* before a rules update has occurred, copy the default config */ + /* files to the interface directory. If files already exist in */ + /* the interface directory, or they are newer, that means a rule */ + /* update has been done and we should leave the customized files */ + /* put in place by the rules update process. */ + /********************************************************************/ + $snort_files = array("gen-msg.map", "classification.config", "reference.config", "attribute_table.dtd", + "sid-msg.map", "unicode.map", "threshold.conf", "preproc_rules/preprocessor.rules", + "preproc_rules/decoder.rules", "preproc_rules/sensitive-data.rules" + ); + foreach ($snort_files as $file) { + if (file_exists("{$snortdir}/{$file}")) { + $ftime = filemtime("{$snortdir}/{$file}"); + if (!file_exists("{$snortcfgdir}/{$file}") || ($ftime > filemtime("{$snortcfgdir}/{$file}"))) + @copy("{$snortdir}/{$file}", "{$snortcfgdir}/{$file}"); + } + } + + /* define alertsystemlog */ + $alertsystemlog_type = ""; + if ($snortcfg['alertsystemlog'] == "on") + $alertsystemlog_type = "output alert_syslog: log_alert"; + + /* define snortunifiedlog */ + $snortunifiedlog_type = ""; + if ($snortcfg['snortunifiedlog'] == "on") + $snortunifiedlog_type = "output unified2: filename snort_{$snort_uuid}_{$if_real}.u2, limit 128"; + + /* define spoink */ + $spoink_type = ""; + if ($snortcfg['blockoffenders7'] == "on") { + $pfkill = ""; + if ($snortcfg['blockoffenderskill'] == "on") + $pfkill = "kill"; + $spoink_wlist = snort_build_list($snortcfg, $snortcfg['whitelistname'], true); + /* write whitelist */ + @file_put_contents("{$snortcfgdir}/{$snortcfg['whitelistname']}", implode("\n", $spoink_wlist)); + $spoink_type = "output alert_pf: {$snortcfgdir}/{$snortcfg['whitelistname']},snort2c,{$snortcfg['blockoffendersip']},{$pfkill}"; + } + + /* define selected suppress file */ + $suppress_file_name = ""; + $suppress = snort_find_list($snortcfg['suppresslistname'], 'suppress'); + if (!empty($suppress)) { + $suppress_data = str_replace("\r", "", base64_decode($suppress['suppresspassthru'])); + @file_put_contents("{$snortcfgdir}/supp{$snortcfg['suppresslistname']}", $suppress_data); + $suppress_file_name = "include {$snortcfgdir}/supp{$snortcfg['suppresslistname']}"; + } + + /* set the snort performance model */ + $snort_performance = "ac-bnfa"; + if(!empty($snortcfg['performance'])) + $snort_performance = $snortcfg['performance']; + + /* if user has defined a custom ssh port, use it */ + if(is_array($config['system']['ssh']) && isset($config['system']['ssh']['port'])) + $ssh_port = $config['system']['ssh']['port']; + else + $ssh_port = "22"; + + /* Define an array of default values for the various preprocessor ports */ + $snort_ports = array( + "dns_ports" => "53", "smtp_ports" => "25", "mail_ports" => "25,465,587,691", + "http_ports" => "36,80,81,82,83,84,85,86,87,88,89,90,311,383,591,593,631,901,1220,1414,1533,1741,1830,2301,2381,2809,3037,3057,3128,3443,3702,4343,4848,5250,6080,6988,7000,7001,7144,7145,7510,7777,7779,8000,8008,8014,8028,8080,8081,8082,8085,8088,8090,8118,8123,8180,8181,8222,8243,8280,8300,8500,8800,8888,8899,9000,9060,9080,9090,9091,9443,9999,10000,11371,15489,29991,33300,34412,34443,34444,41080,44440,50000,50002,51423,55555,56712", + "oracle_ports" => "1024:", "mssql_ports" => "1433", "telnet_ports" => "23", + "snmp_ports" => "161", "ftp_ports" => "21,2100,3535", "ssh_ports" => $ssh_port, + "pop2_ports" => "109", "pop3_ports" => "110", "imap_ports" => "143", + "sip_ports" => "5060,5061,5600", "auth_ports" => "113", "finger_ports" => "79", + "irc_ports" => "6665,6666,6667,6668,6669,7000", "smb_ports" => "139,445", + "nntp_ports" => "119", "rlogin_ports" => "513", "rsh_ports" => "514", + "ssl_ports" => "443,465,563,636,989,992,993,994,995,7801,7802,7900,7901,7902,7903,7904,7905,7906,7907,7908,7909,7910,7911,7912,7913,7914,7915,7916,7917,7918,7919,7920", + "file_data_ports" => "\$HTTP_PORTS,110,143", "shellcode_ports" => "!80", + "sun_rpc_ports" => "111,32770,32771,32772,32773,32774,32775,32776,32777,32778,32779", + "DCERPC_NCACN_IP_TCP" => "139,445", "DCERPC_NCADG_IP_UDP" => "138,1024:", + "DCERPC_NCACN_IP_LONG" => "135,139,445,593,1024:", "DCERPC_NCACN_UDP_LONG" => "135,1024:", + "DCERPC_NCACN_UDP_SHORT" => "135,593,1024:", "DCERPC_NCACN_TCP" => "2103,2105,2107", + "DCERPC_BRIGHTSTORE" => "6503,6504", "DNP3_PORTS" => "20000", "MODBUS_PORTS" => "502", + "GTP_PORTS" => "2123,2152,3386" + ); + + /* Check for defined Aliases that may override default port settings as we build the portvars array */ + $portvardef = ""; + foreach ($snort_ports as $alias => $avalue) { + if (!empty($snortcfg["def_{$alias}"]) && is_alias($snortcfg["def_{$alias}"])) + $snort_ports[$alias] = trim(filter_expand_alias($snortcfg["def_{$alias}"])); + $snort_ports[$alias] = preg_replace('/\s+/', ',', trim($snort_ports[$alias])); + $portvardef .= "portvar " . strtoupper($alias) . " [" . $snort_ports[$alias] . "]\n"; + } + + /* Define the default ports for the Stream5 preprocessor (formatted for easier reading in the snort.conf file) */ + $stream5_ports_client = "21 22 23 25 42 53 70 79 109 110 111 113 119 135 136 137 \\\n"; + $stream5_ports_client .= "\t 139 143 161 445 513 514 587 593 691 1433 1521 1741 \\\n"; + $stream5_ports_client .= "\t 2100 3306 6070 6665 6666 6667 6668 6669 7000 8181 \\\n"; + $stream5_ports_client .= "\t 32770 32771 32772 32773 32774 32775 32776 32777 \\\n"; + $stream5_ports_client .= "\t 32778 32779"; + $stream5_ports_both = "80 81 82 83 84 85 86 87 88 89 90 110 311 383 443 465 563 \\\n"; + $stream5_ports_both .= "\t 591 593 631 636 901 989 992 993 994 995 1220 1414 1533 \\\n"; + $stream5_ports_both .= "\t 1830 2301 2381 2809 3037 3057 3128 3443 3702 4343 4848 \\\n"; + $stream5_ports_both .= "\t 5250 6080 6988 7907 7000 7001 7144 7145 7510 7802 7777 \\\n"; + $stream5_ports_both .= "\t 7779 7801 7900 7901 7902 7903 7904 7905 7906 7908 7909 \\\n"; + $stream5_ports_both .= "\t 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 \\\n"; + $stream5_ports_both .= "\t 8000 8008 8014 8028 8080 8081 8082 8085 8088 8090 8118 \\\n"; + $stream5_ports_both .= "\t 8123 8180 8222 8243 8280 8300 8500 8800 8888 8899 9000 \\\n"; + $stream5_ports_both .= "\t 9060 9080 9090 9091 9443 9999 10000 11371 15489 29991 \\\n"; + $stream5_ports_both .= "\t 33300 34412 34443 34444 41080 44440 50000 50002 51423 \\\n"; + $stream5_ports_both .= "\t 55555 56712"; + + ///////////////////////////// + /* preprocessor code */ + /* def perform_stat */ + $perform_stat = <<<EOD +# Performance Statistics # +preprocessor perfmonitor: time 300 file {$snortlogdir}/snort_{$if_real}{$snort_uuid}/{$if_real}.stats pktcnt 10000 + +EOD; + + /* def ftp_preprocessor */ + $telnet_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['telnet_ports'])); + $ftp_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['ftp_ports'])); + + // Configure FTP_Telnet global options + $ftp_telnet_globals = "inspection_type "; + if ($snortcfg['ftp_telnet_inspection_type'] != "") { $ftp_telnet_globals .= $snortcfg['ftp_telnet_inspection_type']; }else{ $ftp_telnet_globals .= "stateful"; } + if ($snortcfg['ftp_telnet_alert_encrypted'] == "on") + $ftp_telnet_globals .= " \\\n\tencrypted_traffic yes"; + else + $ftp_telnet_globals .= " \\\n\tencrypted_traffic no"; + if ($snortcfg['ftp_telnet_check_encrypted'] == "on") + $ftp_telnet_globals .= " \\\n\tcheck_encrypted"; + + // Configure FTP_Telnet Telnet protocol options + $ftp_telnet_protocol = "ports { {$telnet_ports} }"; + if ($snortcfg['ftp_telnet_normalize'] == "on") + $ftp_telnet_protocol .= " \\\n\tnormalize"; + if ($snortcfg['ftp_telnet_detect_anomalies'] == "on") + $ftp_telnet_protocol .= " \\\n\tdetect_anomalies"; + if ($snortcfg['ftp_telnet_ayt_attack_threshold'] <> '0') { + $ftp_telnet_protocol .= " \\\n\tayt_attack_thresh "; + if ($snortcfg['ftp_telnet_ayt_attack_threshold'] != "") + $ftp_telnet_protocol .= $snortcfg['ftp_telnet_ayt_attack_threshold']; + else + $ftp_telnet_protocol .= "20"; + } + + // Setup the standard FTP commands used for all FTP Server engines + $ftp_cmds = <<<EOD + ftp_cmds { ABOR ACCT ADAT ALLO APPE AUTH CCC CDUP } \ + ftp_cmds { CEL CLNT CMD CONF CWD DELE ENC EPRT } \ + ftp_cmds { EPSV ESTA ESTP FEAT HELP LANG LIST LPRT } \ + ftp_cmds { LPSV MACB MAIL MDTM MFMT MIC MKD MLSD MLST } \ + ftp_cmds { MODE NLST NOOP OPTS PASS PASV PBSZ PORT } \ + ftp_cmds { PROT PWD QUIT REIN REST RETR RMD RNFR } \ + ftp_cmds { RNTO SDUP SITE SIZE SMNT STAT STOR STOU } \ + ftp_cmds { STRU SYST TEST TYPE USER XCUP XCRC XCWD } \ + ftp_cmds { XMAS XMD5 XMKD XPWD XRCP XRMD XRSQ XSEM } \ + ftp_cmds { XSEN XSHA1 XSHA256 } \ + alt_max_param_len 0 { ABOR CCC CDUP ESTA FEAT LPSV NOOP PASV PWD QUIT REIN STOU SYST XCUP XPWD } \ + alt_max_param_len 200 { ALLO APPE CMD HELP NLST RETR RNFR STOR STOU XMKD } \ + alt_max_param_len 256 { CWD RNTO } \ + alt_max_param_len 400 { PORT } \ + alt_max_param_len 512 { MFMT SIZE } \ + chk_str_fmt { ACCT ADAT ALLO APPE AUTH CEL CLNT CMD } \ + chk_str_fmt { CONF CWD DELE ENC EPRT EPSV ESTP HELP } \ + chk_str_fmt { LANG LIST LPRT MACB MAIL MDTM MIC MKD } \ + chk_str_fmt { MLSD MLST MODE NLST OPTS PASS PBSZ PORT } \ + chk_str_fmt { PROT REST RETR RMD RNFR RNTO SDUP SITE } \ + chk_str_fmt { SIZE SMNT STAT STOR STRU TEST TYPE USER } \ + chk_str_fmt { XCRC XCWD XMAS XMD5 XMKD XRCP XRMD XRSQ } \ + chk_str_fmt { XSEM XSEN XSHA1 XSHA256 } \ + cmd_validity ALLO < int [ char R int ] > \ + cmd_validity EPSV < [ { char 12 | char A char L char L } ] > \ + cmd_validity MACB < string > \ + cmd_validity MDTM < [ date nnnnnnnnnnnnnn[.n[n[n]]] ] string > \ + cmd_validity MODE < char ASBCZ > \ + cmd_validity PORT < host_port > \ + cmd_validity PROT < char CSEP > \ + cmd_validity STRU < char FRPO [ string ] > \ + cmd_validity TYPE < { char AE [ char NTC ] | char I | char L [ number ] } > + +EOD; + + // Configure all the FTP_Telnet FTP protocol options + // Iterate and configure the FTP Client engines + $ftp_default_client_engine = array( "name" => "default", "bind_to" => "all", "max_resp_len" => 256, + "telnet_cmds" => "no", "ignore_telnet_erase_cmds" => "yes", + "bounce" => "yes", "bounce_to_net" => "", "bounce_to_port" => "" ); + + if (!is_array($snortcfg['ftp_client_engine']['item'])) + $snortcfg['ftp_client_engine']['item'] = array(); + + // If no FTP client engine is configured, use the default + // to keep from breaking Snort. + if (empty($snortcfg['ftp_client_engine']['item'])) + $snortcfg['ftp_client_engine']['item'][] = $ftp_default_client_engine; + $ftp_client_engine = ""; + + foreach ($snortcfg['ftp_client_engine']['item'] as $f => $v) { + $buffer = "preprocessor ftp_telnet_protocol: ftp client "; + if ($v['name'] == "default" && $v['bind_to'] == "all") + $buffer .= "default \\\n"; + elseif (is_alias($v['bind_to'])) { + $tmp = trim(filter_expand_alias($v['bind_to'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ' ', $tmp); + $buffer .= "{$tmp} \\\n"; + } + else { + log_error("[snort] ERROR: unable to resolve IP Address Alias '{$v['bind_to']}' for FTP client '{$v['name']}' ... skipping entry."); + continue; + } + } + else { + log_error("[snort] ERROR: unable to resolve IP Address Alias '{$v['bind_to']}' for FTP client '{$v['name']}' ... skipping entry."); + continue; + } + + if ($v['max_resp_len'] == "") + $buffer .= "\tmax_resp_len 256 \\\n"; + else + $buffer .= "\tmax_resp_len {$v['max_resp_len']} \\\n"; + + $buffer .= "\ttelnet_cmds {$v['telnet_cmds']} \\\n"; + $buffer .= "\tignore_telnet_erase_cmds {$v['ignore_telnet_erase_cmds']} \\\n"; + + if ($v['bounce'] == "yes") { + if (is_alias($v['bounce_to_net']) && is_alias($v['bounce_to_port'])) { + $net = trim(filter_expand_alias($v['bounce_to_net'])); + $port = trim(filter_expand_alias($v['bounce_to_port'])); + if (!empty($net) && !empty($port) && + snort_is_single_addr_alias($v['bounce_to_net']) && + (is_port($port) || is_portrange($port))) { + $port = preg_replace('/\s+/', ',', $port); + // Change port range delimiter to comma for ftp_telnet client preprocessor + if (is_portrange($port)) + $port = str_replace(":", ",", $port); + $buffer .= "\tbounce yes \\\n"; + $buffer .= "\tbounce_to { {$net},{$port} }\n"; + } + else { + // One or both of the BOUNCE_TO alias values is not right, + // so figure out which and log an appropriate error. + if (empty($net) || !snort_is_single_addr_alias($v['bounce_to_net'])) + log_error("[snort] ERROR: illegal value for bounce_to Address Alias [{$v['bounce_to_net']}] for FTP client engine [{$v['name']}] ... omitting 'bounce_to' option for this client engine."); + if (empty($port) || !(is_port($port) || is_portrange($port))) + log_error("[snort] ERROR: illegal value for bounce_to Port Alias [{$v['bounce_to_port']}] for FTP client engine [{$v['name']}] ... omitting 'bounce_to' option for this client engine."); + $buffer .= "\tbounce yes\n"; + } + } + else + $buffer .= "\tbounce yes\n"; + } + else + $buffer .= "\tbounce no\n"; + + // Add this FTP client engine to the master string + $ftp_client_engine .= "{$buffer}\n"; + } + // Trim final trailing newline + rtrim($ftp_client_engine); + + // Iterate and configure the FTP Server engines + $ftp_default_server_engine = array( "name" => "default", "bind_to" => "all", "ports" => "default", + "telnet_cmds" => "no", "ignore_telnet_erase_cmds" => "yes", + "ignore_data_chan" => "no", "def_max_param_len" => 100 ); + + if (!is_array($snortcfg['ftp_server_engine']['item'])) + $snortcfg['ftp_server_engine']['item'] = array(); + + // If no FTP server engine is configured, use the default + // to keep from breaking Snort. + if (empty($snortcfg['ftp_server_engine']['item'])) + $snortcfg['ftp_server_engine']['item'][] = $ftp_default_server_engine; + $ftp_server_engine = ""; + + foreach ($snortcfg['ftp_server_engine']['item'] as $f => $v) { + $buffer = "preprocessor ftp_telnet_protocol: ftp server "; + if ($v['name'] == "default" && $v['bind_to'] == "all") + $buffer .= "default \\\n"; + elseif (is_alias($v['bind_to'])) { + $tmp = trim(filter_expand_alias($v['bind_to'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ' ', $tmp); + $buffer .= "{$tmp} \\\n"; + } + else { + log_error("[snort] ERROR: unable to resolve IP Address Alias '{$v['bind_to']}' for FTP server '{$v['name']}' ... skipping entry."); + continue; + } + } + else { + log_error("[snort] ERROR: unable to resolve IP Address Alias '{$v['bind_to']}' for FTP server '{$v['name']}' ... skipping entry."); + continue; + } + + if ($v['def_max_param_len'] == "") + $buffer .= "\tdef_max_param_len 100 \\\n"; + elseif ($v['def_max_param_len'] <> '0') + $buffer .= "\tdef_max_param_len {$v['def_max_param_len']} \\\n"; + + if ($v['ports'] == "default" || !is_alias($v['ports']) || empty($v['ports'])) + $buffer .= "\tports { {$ftp_ports} } \\\n"; + elseif (is_alias($v['ports'])) { + $tmp = trim(filter_expand_alias($v['ports'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ' ', $tmp); + $tmp = snort_expand_port_range($tmp, ' '); + $buffer .= "\tports { {$tmp} } \\\n"; + } + else { + log_error("[snort] ERROR: unable to resolve Port Alias '{$v['ports']}' for FTP server '{$v['name']}' ... reverting to defaults."); + $buffer .= "\tports { {$ftp_ports} } \\\n"; + } + } + + $buffer .= "\ttelnet_cmds {$v['telnet_cmds']} \\\n"; + $buffer .= "\tignore_telnet_erase_cmds {$v['ignore_telnet_erase_cmds']} \\\n"; + if ($v['ignore_data_chan'] == "yes") + $buffer .= "\tignore_data_chan yes \\\n"; + $buffer .= "{$ftp_cmds}\n"; + + // Add this FTP server engine to the master string + $ftp_server_engine .= $buffer; + } + // Remove trailing newlines + rtrim($ftp_server_engine); + + $ftp_preprocessor = <<<EOD +# ftp_telnet preprocessor # +preprocessor ftp_telnet: global \ + {$ftp_telnet_globals} + +preprocessor ftp_telnet_protocol: telnet \ + {$ftp_telnet_protocol} + +{$ftp_server_engine} +{$ftp_client_engine} +EOD; + + $pop_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['pop3_ports'])); + $pop_preproc = <<<EOD +# POP preprocessor # +preprocessor pop: \ + ports { {$pop_ports} } \ + memcap 1310700 \ + qp_decode_depth 0 \ + b64_decode_depth 0 \ + bitenc_decode_depth 0 + +EOD; + + $imap_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['imap_ports'])); + $imap_preproc = <<<EOD +# IMAP preprocessor # +preprocessor imap: \ + ports { {$imap_ports} } \ + memcap 1310700 \ + qp_decode_depth 0 \ + b64_decode_depth 0 \ + bitenc_decode_depth 0 + +EOD; + + $smtp_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['mail_ports'])); + /* def smtp_preprocessor */ + $smtp_preprocessor = <<<EOD +# SMTP preprocessor # +preprocessor SMTP: \ + ports { {$smtp_ports} } \ + inspection_type stateful \ + normalize cmds \ + ignore_tls_data \ + valid_cmds { MAIL RCPT HELP HELO ETRN EHLO EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT \ + NOOP RSET SEND SAML SOML AUTH TURN ETRN PIPELINING CHUNKING DATA DSN RSET QUIT ONEX QUEU \ + STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE \ + XQUEU XSTA XTRN XUSR } \ + normalize_cmds { MAIL RCPT HELP HELO ETRN EHLO EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY \ + IDENT NOOP RSET SEND SAML SOML AUTH TURN ETRN PIPELINING CHUNKING DATA DSN RSET QUIT \ + ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 \ + XGEN XLICENSE XQUEU XSTA XTRN XUSR } \ + max_header_line_len 1000 \ + max_response_line_len 512 \ + alt_max_command_line_len 260 { MAIL } \ + alt_max_command_line_len 300 { RCPT } \ + alt_max_command_line_len 500 { HELP HELO ETRN EHLO } \ + alt_max_command_line_len 255 { EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET } \ + alt_max_command_line_len 246 { SEND SAML SOML AUTH TURN ETRN PIPELINING CHUNKING DATA DSN RSET QUIT ONEX } \ + alt_max_command_line_len 246 { QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR } \ + alt_max_command_line_len 246 { XAUTH XCIR XEXCH50 XGEN XLICENSE XQUEU XSTA XTRN XUSR } \ + xlink2state { enable } \ + log_mailfrom \ + log_rcptto \ + log_email_hdrs \ + email_hdrs_log_depth 1464 \ + log_filename \ + qp_decode_depth 0 \ + b64_decode_depth 0 \ + bitenc_decode_depth 0 \ + uu_decode_depth 0 + +EOD; + + /* def sf_portscan */ + $sf_pscan_protocol = "all"; + if (!empty($snortcfg['pscan_protocol'])) + $sf_pscan_protocol = $snortcfg['pscan_protocol']; + $sf_pscan_type = "all"; + if (!empty($snortcfg['pscan_type'])) + $sf_pscan_type = $snortcfg['pscan_type']; + $sf_pscan_memcap = "10000000"; + if (!empty($snortcfg['pscan_memcap'])) + $sf_pscan_memcap = $snortcfg['pscan_memcap']; + $sf_pscan_sense_level = "medium"; + if (!empty($snortcfg['pscan_sense_level'])) + $sf_pscan_sense_level = $snortcfg['pscan_sense_level']; + $sf_pscan_ignore_scanners = "\$HOME_NET"; + if (!empty($snortcfg['pscan_ignore_scanners']) && is_alias($snortcfg['pscan_ignore_scanners'])) { + $sf_pscan_ignore_scanners = trim(filter_expand_alias($snortcfg['pscan_ignore_scanners'])); + $sf_pscan_ignore_scanners = preg_replace('/\s+/', ',', trim($sf_pscan_ignore_scanners)); + } + + $sf_portscan = <<<EOD +# sf Portscan # +preprocessor sfportscan: \ + scan_type { {$sf_pscan_type} } \ + proto { {$sf_pscan_protocol} } \ + memcap { {$sf_pscan_memcap} } \ + sense_level { {$sf_pscan_sense_level} } \ + ignore_scanners { {$sf_pscan_ignore_scanners} } + +EOD; + + /* def ssh_preproc */ + $ssh_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['ssh_ports'])); + $ssh_preproc = <<<EOD +# SSH preprocessor # +preprocessor ssh: \ + server_ports { {$ssh_ports} } \ + autodetect \ + max_client_bytes 19600 \ + max_encrypted_packets 20 \ + max_server_version_len 100 \ + enable_respoverflow enable_ssh1crc32 \ + enable_srvoverflow enable_protomismatch + +EOD; + + /* def other_preprocs */ + $sun_rpc_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['sun_rpc_ports'])); + $other_preprocs = <<<EOD +# Other preprocs # +preprocessor rpc_decode: \ + {$sun_rpc_ports} \ + no_alert_multiple_requests \ + no_alert_large_fragments \ + no_alert_incomplete + +# Back Orifice preprocessor # +preprocessor bo + +EOD; + + /* def dce_rpc_2 */ + $dce_rpc_2 = <<<EOD +# DCE/RPC 2 # +preprocessor dcerpc2: \ + memcap 102400, \ + events [co] + +preprocessor dcerpc2_server: default, \ + policy WinXP, \ + detect [smb [{$snort_ports['smb_ports']}], \ + tcp 135, \ + udp 135, \ + rpc-over-http-server 593], \ + autodetect [tcp 1025:, \ + udp 1025:, \ + rpc-over-http-server 1025:], \ + smb_max_chain 3, smb_invalid_shares ["C$", "D$", "ADMIN$"] + +EOD; + + $sip_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['sip_ports'])); + $sip_preproc = <<<EOD +# SIP preprocessor # +preprocessor sip: \ + max_sessions 40000, \ + ports { {$sip_ports} }, \ + methods { invite \ + cancel \ + ack \ + bye \ + register \ + options \ + refer \ + subscribe \ + update \ + join \ + info \ + message \ + notify \ + benotify \ + do \ + qauth \ + sprack \ + publish \ + service \ + unsubscribe \ + prack }, \ + max_call_id_len 80, \ + max_from_len 256, \ + max_to_len 256, \ + max_via_len 1024, \ + max_requestName_len 50, \ + max_uri_len 512, \ + ignore_call_channel, \ + max_content_len 2048, \ + max_contact_len 512 + +EOD; + + $dns_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['dns_ports'])); + /* def dns_preprocessor */ + $dns_preprocessor = <<<EOD +# DNS preprocessor # +preprocessor dns: \ + ports { {$dns_ports} } \ + enable_rdata_overflow + +EOD; + + /* def dnp3_preprocessor */ + $dnp3_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['DNP3_PORTS'])); + $dnp3_preproc = <<<EOD +# DNP3 preprocessor # +preprocessor dnp3: \ + ports { {$dnp3_ports} } \ + memcap 262144 \ + check_crc + +EOD; + + /* def modbus_preprocessor */ + $modbus_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['MODBUS_PORTS'])); + $modbus_preproc = <<<EOD +# Modbus preprocessor # +preprocessor modbus: \ + ports { {$modbus_ports} } + +EOD; + + /* def gtp_preprocessor */ + $gtp_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['GTP_PORTS'])); + $gtp_preproc = <<<EOD +# GTP preprocessor # +preprocessor gtp: \ + ports { {$gtp_ports} } + +EOD; + + /* def ssl_preprocessor */ + $ssl_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['ssl_ports'])); + $ssl_preproc = <<<EOD +# SSL preprocessor # +preprocessor ssl: \ + ports { {$ssl_ports} }, \ + trustservers, \ + noinspect_encrypted + +EOD; + + /* def sensitive_data_preprocessor */ + if ($snortcfg['sdf_mask_output'] == "on") + $sdf_mask_output = "\\\n\tmask_output"; + else + $sdf_mask_output = ""; + if (empty($snortcfg['sdf_alert_threshold'])) + $snortcfg['sdf_alert_threshold'] = 25; + $sensitive_data = <<<EOD +# SDF preprocessor # +preprocessor sensitive_data: \ + alert_threshold {$snortcfg['sdf_alert_threshold']} {$sdf_mask_output} + +EOD; + + /* define servers as IP variables */ + $snort_servers = array ( + "dns_servers" => "\$HOME_NET", "smtp_servers" => "\$HOME_NET", "http_servers" => "\$HOME_NET", + "www_servers" => "\$HOME_NET", "sql_servers" => "\$HOME_NET", "telnet_servers" => "\$HOME_NET", + "snmp_servers" => "\$HOME_NET", "ftp_servers" => "\$HOME_NET", "ssh_servers" => "\$HOME_NET", + "pop_servers" => "\$HOME_NET", "imap_servers" => "\$HOME_NET", "sip_proxy_ip" => "\$HOME_NET", + "sip_servers" => "\$HOME_NET", "rpc_servers" => "\$HOME_NET", "dnp3_server" => "\$HOME_NET", + "dnp3_client" => "\$HOME_NET", "modbus_server" => "\$HOME_NET", "modbus_client" => "\$HOME_NET", + "enip_server" => "\$HOME_NET", "enip_client" => "\$HOME_NET", + "aim_servers" => "64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24" + ); + + // Change old name from "var" to new name of "ipvar" for IP variables because + // Snort is deprecating the old "var" name in newer versions. + $ipvardef = ""; + foreach ($snort_servers as $alias => $avalue) { + if (!empty($snortcfg["def_{$alias}"]) && is_alias($snortcfg["def_{$alias}"])) { + $avalue = trim(filter_expand_alias($snortcfg["def_{$alias}"])); + $avalue = preg_replace('/\s+/', ',', trim($avalue)); + } + $ipvardef .= "ipvar " . strtoupper($alias) . " [{$avalue}]\n"; + } + + $snort_preproc_libs = array( + "dce_rpc_2" => "dce2_preproc", "dns_preprocessor" => "dns_preproc", "ftp_preprocessor" => "ftptelnet_preproc", "imap_preproc" => "imap_preproc", + "pop_preproc" => "pop_preproc", "reputation_preproc" => "reputation_preproc", "sensitive_data" => "sdf_preproc", + "sip_preproc" => "sip_preproc", "gtp_preproc" => "gtp_preproc", "smtp_preprocessor" => "smtp_preproc", "ssh_preproc" => "ssh_preproc", + "ssl_preproc" => "ssl_preproc", "dnp3_preproc" => "dnp3_preproc", "modbus_preproc" => "modbus_preproc" + ); + $snort_preproc = array ( + "perform_stat", "other_preprocs", "ftp_preprocessor", "smtp_preprocessor", "ssl_preproc", "sip_preproc", "gtp_preproc", "ssh_preproc", + "sf_portscan", "dce_rpc_2", "dns_preprocessor", "sensitive_data", "pop_preproc", "imap_preproc", "dnp3_preproc", "modbus_preproc" + ); + $default_disabled_preprocs = array( + "sf_portscan", "gtp_preproc", "sensitive_data", "dnp3_preproc", "modbus_preproc" + ); + $snort_preprocessors = ""; + foreach ($snort_preproc as $preproc) { + if ($snortcfg[$preproc] == 'on' || empty($snortcfg[$preproc]) ) { + + /* If preprocessor is not explicitly "on" or "off", then default to "off" if in our default disabled list */ + if (empty($snortcfg[$preproc]) && in_array($preproc, $default_disabled_preprocs)) + continue; + + /* NOTE: The $$ is not a bug. It is an advanced feature of php */ + if (!empty($snort_preproc_libs[$preproc])) { + $preproclib = "libsf_" . $snort_preproc_libs[$preproc]; + if (!file_exists($snort_dirs['dynamicpreprocessor'] . "{$preproclib}.so")) { + if (file_exists("{$snortlibdir}/dynamicpreprocessor/{$preproclib}.so")) { + @copy("{$snortlibdir}/dynamicpreprocessor/{$preproclib}.so", "{$snort_dirs['dynamicpreprocessor']}/{$preproclib}.so"); + $snort_preprocessors .= $$preproc; + $snort_preprocessors .= "\n"; + } else + log_error("Could not find the {$preproclib} file. Snort might error out!"); + } else { + $snort_preprocessors .= $$preproc; + $snort_preprocessors .= "\n"; + } + } else { + $snort_preprocessors .= $$preproc; + $snort_preprocessors .= "\n"; + } + } + } + // Remove final trailing newline + $snort_preprocessors = rtrim($snort_preprocessors); + + $snort_misc_include_rules = ""; + if (file_exists("{$snortcfgdir}/reference.config")) + $snort_misc_include_rules .= "include {$snortcfgdir}/reference.config\n"; + if (file_exists("{$snortcfgdir}/classification.config")) + $snort_misc_include_rules .= "include {$snortcfgdir}/classification.config\n"; + if (is_dir("{$snortcfgdir}/preproc_rules")) { + if ($snortcfg['sensitive_data'] == 'on' && $protect_preproc_rules == "off") { + $sedcmd = '/^#alert.*classtype:sdf/s/^#//'; + if (file_exists("{$snortcfgdir}/preproc_rules/sensitive-data.rules")){ + $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/sensitive-data.rules\n"; + #enable only selected sensitive data + if (file_exists(SNORTDIR."/preproc_rules/sensitive-data.rules")){ + $sdf_alert_pattern="(".preg_replace("/,/","|",$snortcfg['sdf_alert_data_type']).")"; + $sd_tmp_file=file(SNORTDIR."/preproc_rules/sensitive-data.rules"); + $sd_tmp_new_file=""; + foreach ($sd_tmp_file as $sd_tmp_line) + $sd_tmp_new_file.=preg_match("/$sdf_alert_pattern/i",$sd_tmp_line) ? $sd_tmp_line : ""; + file_put_contents("{$snortcfgdir}/preproc_rules/sensitive-data.rules",$sd_tmp_new_file,LOCK_EX); + } + } + } else + $sedcmd = '/^alert.*classtype:sdf/s/^/#/'; + if (file_exists("{$snortcfgdir}/preproc_rules/decoder.rules") && + file_exists("{$snortcfgdir}/preproc_rules/preprocessor.rules") && $protect_preproc_rules == "off") { + @file_put_contents("{$g['tmp_path']}/sedcmd", $sedcmd); + mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/preprocessor.rules"); + mwexec("/usr/bin/sed -I '' -f {$g['tmp_path']}/sedcmd {$snortcfgdir}/preproc_rules/decoder.rules"); + @unlink("{$g['tmp_path']}/sedcmd"); + $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/decoder.rules\n"; + $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/preprocessor.rules\n"; + } else if (file_exists("{$snortcfgdir}/preproc_rules/decoder.rules") && + file_exists("{$snortcfgdir}/preproc_rules/preprocessor.rules") && $protect_preproc_rules == "on") { + $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/decoder.rules\n"; + $snort_misc_include_rules .= "include \$PREPROC_RULE_PATH/preprocessor.rules\n"; + } + else { + $snort_misc_include_rules .= "config autogenerate_preprocessor_decoder_rules\n"; + log_error("[Snort] Seems preprocessor/decoder rules are missing, enabling autogeneration of them"); + } + } else { + $snort_misc_include_rules .= "config autogenerate_preprocessor_decoder_rules\n"; + log_error("[Snort] Seems preprocessor/decoder rules are missing, enabling autogeneration of them"); + } + + /* generate rule sections to load */ + /* The files are always configured so the update process is easier */ + $selected_rules_sections = "include \$RULE_PATH/{$snort_enforcing_rules_file}\n"; + $selected_rules_sections .= "include \$RULE_PATH/{$flowbit_rules_file}\n"; + $selected_rules_sections .= "include \$RULE_PATH/custom.rules\n"; + + // Remove trailing newlines + $snort_misc_include_rules = rtrim($snort_misc_include_rules); + $selected_rules_sections = rtrim($selected_rules_sections); + + /* Create the actual rules files and save in the interface directory */ + snort_prepare_rule_files($snortcfg, $snortcfgdir); + + $cksumcheck = "all"; + if ($snortcfg['cksumcheck'] == 'on') + $cksumcheck = "none"; + + /* Pull in user-configurable detection config options */ + $cfg_detect_settings = "search-method {$snort_performance} max-pattern-len 20 max_queue_events 5"; + if ($snortcfg['fpm_split_any_any'] == "on") + $cfg_detect_settings .= " split-any-any"; + if ($snortcfg['fpm_search_optimize'] == "on") + $cfg_detect_settings .= " search-optimize"; + if ($snortcfg['fpm_no_stream_inserts'] == "on") + $cfg_detect_settings .= " no_stream_inserts"; + + /* Pull in user-configurable options for Frag3 preprocessor settings */ + /* Get global Frag3 options first and put into a string */ + $frag3_global = "preprocessor frag3_global: "; + if (!empty($snortcfg['frag3_memcap']) || $snortcfg['frag3_memcap'] == "0") + $frag3_global .= "memcap {$snortcfg['frag3_memcap']}, "; + else + $frag3_global .= "memcap 4194304, "; + if (!empty($snortcfg['frag3_max_frags'])) + $frag3_global .= "max_frags {$snortcfg['frag3_max_frags']}"; + else + $frag3_global .= "max_frags 8192"; + if ($snortcfg['frag3_detection'] == "off") + $frag3_global .= ", disabled"; + + $frag3_default_tcp_engine = array( "name" => "default", "bind_to" => "all", "policy" => "bsd", + "timeout" => 60, "min_ttl" => 1, "detect_anomalies" => "on", + "overlap_limit" => 0, "min_frag_len" => 0 ); + $frag3_engine = ""; + + // Now iterate configured Frag3 engines and write them to a string if enabled + if ($snortcfg['frag3_detection'] == "on") { + if (!is_array($snortcfg['frag3_engine']['item'])) + $snortcfg['frag3_engine']['item'] = array(); + + // If no frag3 tcp engine is configured, use the default + if (empty($snortcfg['frag3_engine']['item'])) + $snortcfg['frag3_engine']['item'][] = $frag3_default_tcp_engine; + + foreach ($snortcfg['frag3_engine']['item'] as $f => $v) { + $frag3_engine .= "preprocessor frag3_engine: "; + $frag3_engine .= "policy {$v['policy']}"; + if ($v['bind_to'] <> "all") { + $tmp = trim(filter_expand_alias($v['bind_to'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ',', $tmp); + if (strpos($tmp, ",") !== false) + $frag3_engine .= " \\\n\tbind_to [{$tmp}]"; + else + $frag3_engine .= " \\\n\tbind_to {$tmp}"; + } + else + log_error("[snort] WARNING: unable to resolve IP List Alias '{$v['bind_to']}' for Frag3 engine '{$v['name']}' ... using 0.0.0.0 failsafe."); + } + $frag3_engine .= " \\\n\ttimeout {$v['timeout']}"; + $frag3_engine .= " \\\n\tmin_ttl {$v['min_ttl']}"; + if ($v['detect_anomalies'] == "on") { + $frag3_engine .= " \\\n\tdetect_anomalies"; + $frag3_engine .= " \\\n\toverlap_limit {$v['overlap_limit']}"; + $frag3_engine .= " \\\n\tmin_fragment_length {$v['min_frag_len']}"; + } + // Add newlines to terminate this engine + $frag3_engine .= "\n\n"; + } + // Remove trailing newline + $frag3_engine = rtrim($frag3_engine); + } + + // Grab any user-customized value for Protocol Aware Flushing (PAF) max PDUs + $paf_max_pdu_config = "config paf_max: "; + if (empty($snortcfg['max_paf']) || $snortcfg['max_paf'] == '0') + $paf_max_pdu_config .= "0"; + else + $paf_max_pdu_config .= $snortcfg['max_paf']; + + // Pull in user-configurable options for Stream5 preprocessor settings + // Get global options first and put into a string + $stream5_global = "preprocessor stream5_global: \\\n"; + if ($snortcfg['stream5_reassembly'] == "off") + $stream5_global .= "\tdisabled, \\\n"; + if ($snortcfg['stream5_track_tcp'] == "off") + $stream5_global .= "\ttrack_tcp no,"; + else { + $stream5_global .= "\ttrack_tcp yes,"; + if (!empty($snortcfg['stream5_max_tcp'])) + $stream5_global .= " \\\n\tmax_tcp {$snortcfg['stream5_max_tcp']},"; + else + $stream5_global .= " \\\n\tmax_tcp 262144,"; + } + if ($snortcfg['stream5_track_udp'] == "off") + $stream5_global .= " \\\n\ttrack_udp no,"; + else { + $stream5_global .= " \\\n\ttrack_udp yes,"; + if (!empty($snortcfg['stream5_max_udp'])) + $stream5_global .= " \\\n\tmax_udp {$snortcfg['stream5_max_udp']},"; + else + $stream5_global .= " \\\n\tmax_udp 131072,"; + } + if ($snortcfg['stream5_track_icmp'] == "on") { + $stream5_global .= " \\\n\ttrack_icmp yes,"; + if (!empty($snortcfg['stream5_max_icmp'])) + $stream5_global .= " \\\n\tmax_icmp {$snortcfg['stream5_max_icmp']},"; + else + $stream5_global .= " \\\n\tmax_icmp 65536,"; + } + else + $stream5_global .= " \\\n\ttrack_icmp no,"; + if (!empty($snortcfg['stream5_mem_cap'])) + $stream5_global .= " \\\n\tmemcap {$snortcfg['stream5_mem_cap']},"; + else + $stream5_global .= " \\\n\tmemcap 8388608,"; + + if (!empty($snortcfg['stream5_prune_log_max']) || $snortcfg['stream5_prune_log_max'] == '0') + $stream5_global .= " \\\n\tprune_log_max {$snortcfg['stream5_prune_log_max']}"; + else + $stream5_global .= " \\\n\tprune_log_max 1048576"; + if ($snortcfg['stream5_flush_on_alert'] == "on") + $stream5_global .= ", \\\n\tflush_on_alert"; + + $stream5_default_tcp_engine = array( "name" => "default", "bind_to" => "all", "policy" => "bsd", "timeout" => 30, + "max_queued_bytes" => 1048576, "detect_anomalies" => "off", "overlap_limit" => 0, + "max_queued_segs" => 2621, "require_3whs" => "off", "startup_3whs_timeout" => 0, + "no_reassemble_async" => "off", "dont_store_lg_pkts" => "off", "max_window" => 0, + "use_static_footprint_sizes" => "off", "check_session_hijacking" => "off", "ports_client" => "default", + "ports_both" => "default", "ports_server" => "none" ); + $stream5_tcp_engine = ""; + + // Now iterate configured Stream5 TCP engines and write them to a string if enabled + if ($snortcfg['stream5_reassembly'] == "on") { + if (!is_array($snortcfg['stream5_tcp_engine']['item'])) + $snortcfg['stream5_tcp_engine']['item'] = array(); + + // If no stream5 tcp engine is configured, use the default + if (empty($snortcfg['stream5_tcp_engine']['item'])) + $snortcfg['stream5_tcp_engine']['item'][] = $stream5_default_tcp_engine; + + foreach ($snortcfg['stream5_tcp_engine']['item'] as $f => $v) { + $buffer = "preprocessor stream5_tcp: "; + $buffer .= "policy {$v['policy']},"; + if ($v['bind_to'] <> "all") { + $tmp = trim(filter_expand_alias($v['bind_to'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ',', $tmp); + if (strpos($tmp, ",") !== false) + $buffer .= " \\\n\tbind_to [{$tmp}],"; + else + $buffer .= " \\\n\tbind_to {$tmp},"; + } + else { + log_error("[snort] WARNING: unable to resolve IP Address Alias [{$v['bind_to']}] for Stream5 TCP engine '{$v['name']}' ... skipping this engine."); + continue; + } + } + $stream5_tcp_engine .= $buffer; + $stream5_tcp_engine .= " \\\n\ttimeout {$v['timeout']},"; + $stream5_tcp_engine .= " \\\n\toverlap_limit {$v['overlap_limit']},"; + $stream5_tcp_engine .= " \\\n\tmax_window {$v['max_window']},"; + $stream5_tcp_engine .= " \\\n\tmax_queued_bytes {$v['max_queued_bytes']},"; + $stream5_tcp_engine .= " \\\n\tmax_queued_segs {$v['max_queued_segs']}"; + if ($v['use_static_footprint_sizes'] == "on") + $stream5_tcp_engine .= ", \\\n\tuse_static_footprint_sizes"; + if ($v['check_session_hijacking'] == "on") + $stream5_tcp_engine .= ", \\\n\tcheck_session_hijacking"; + if ($v['dont_store_lg_pkts'] == "on") + $stream5_tcp_engine .= ", \\\n\tdont_store_large_packets"; + if ($v['no_reassemble_async'] == "on") + $stream5_tcp_engine .= ", \\\n\tdont_reassemble_async"; + if ($v['detect_anomalies'] == "on") + $stream5_tcp_engine .= ", \\\n\tdetect_anomalies"; + if ($v['require_3whs'] == "on") + $stream5_tcp_engine .= ", \\\n\trequire_3whs {$v['startup_3whs_timeout']}"; + if (!empty($v['ports_client'])) { + $stream5_tcp_engine .= ", \\\n\tports client"; + if ($v['ports_client'] == " all") + $stream5_tcp_engine .= " all"; + elseif ($v['ports_client'] == "default") + $stream5_tcp_engine .= " {$stream5_ports_client}"; + else { + $tmp = trim(filter_expand_alias($v['ports_client'])); + if (!empty($tmp)) + $stream5_tcp_engine .= " " . trim(preg_replace('/\s+/', ' ', $tmp)); + else { + $stream5_tcp_engine .= " {$stream5_ports_client}"; + log_error("[snort] WARNING: unable to resolve Ports Client Alias [{$v['ports_client']}] for Stream5 TCP engine '{$v['name']}' ... using default value."); + } + } + } + if (!empty($v['ports_both'])) { + $stream5_tcp_engine .= ", \\\n\tports both"; + if ($v['ports_both'] == " all") + $stream5_tcp_engine .= " all"; + elseif ($v['ports_both'] == "default") + $stream5_tcp_engine .= " {$stream5_ports_both}"; + else { + $tmp = trim(filter_expand_alias($v['ports_both'])); + if (!empty($tmp)) + $stream5_tcp_engine .= " " . trim(preg_replace('/\s+/', ' ', $tmp)); + else { + $stream5_tcp_engine .= " {$stream5_ports_both}"; + log_error("[snort] WARNING: unable to resolve Ports Both Alias [{$v['ports_both']}] for Stream5 TCP engine '{$v['name']}' ... using default value."); + } + } + } + if (!empty($v['ports_server']) && $v['ports_server'] <> "none" && $v['ports_server'] <> "default") { + if ($v['ports_server'] == " all") { + $stream5_tcp_engine .= ", \\\n\tports server"; + $stream5_tcp_engine .= " all"; + } + else { + $tmp = trim(filter_expand_alias($v['ports_server'])); + if (!empty($tmp)) { + $stream5_tcp_engine .= ", \\\n\tports server"; + $stream5_tcp_engine .= " " . trim(preg_replace('/\s+/', ' ', $tmp)); + } + else + log_error("[snort] WARNING: unable to resolve Ports Server Alias [{$v['ports_server']}] for Stream5 TCP engine '{$v['name']}' ... defaulting to none."); + } + } + + // Make sure the "ports" parameter is set, or else default to a safe value + if (strpos($stream5_tcp_engine, "ports ") === false) + $stream5_tcp_engine .= ", \\\n\tports both all"; + + // Add a pair of newlines to terminate this engine + $stream5_tcp_engine .= "\n\n"; + } + // Trim off the final trailing newline + $stream5_tcp_engine = rtrim($stream5_tcp_engine); + } + + // Configure the Stream5 UDP engine if it and Stream5 reassembly are enabled + if ($snortcfg['stream5_track_udp'] == "off" || $snortcfg['stream5_reassembly'] == "off") + $stream5_udp_engine = ""; + else { + $stream5_udp_engine = "preprocessor stream5_udp: "; + if (!empty($snortcfg['stream5_udp_timeout'])) + $stream5_udp_engine .= "timeout {$snortcfg['stream5_udp_timeout']}"; + else + $stream5_udp_engine .= "timeout 30"; + } + + // Configure the Stream5 ICMP engine if it and Stream5 reassembly are enabled + if ($snortcfg['stream5_track_icmp'] == "on" && $snortcfg['stream5_reassembly'] == "on") { + $stream5_icmp_engine = "preprocessor stream5_icmp: "; + if (!empty($snortcfg['stream5_icmp_timeout'])) + $stream5_icmp_engine .= "timeout {$snortcfg['stream5_icmp_timeout']}"; + else + $stream5_icmp_engine .= "timeout 30"; + } + else + $stream5_icmp_engine = ""; + + // Check for and configure Host Attribute Table if enabled + $host_attrib_config = ""; + if ($snortcfg['host_attribute_table'] == "on" && !empty($snortcfg['host_attribute_data'])) { + file_put_contents("{$snortcfgdir}/host_attributes", base64_decode($snortcfg['host_attribute_data'])); + $host_attrib_config = "# Host Attribute Table #\n"; + $host_attrib_config .= "attribute_table filename {$snortcfgdir}/host_attributes\n"; + if (!empty($snortcfg['max_attribute_hosts'])) + $host_attrib_config .= "config max_attribute_hosts: {$snortcfg['max_attribute_hosts']}\n"; + if (!empty($snortcfg['max_attribute_services_per_host'])) + $host_attrib_config .= "config max_attribute_services_per_host: {$snortcfg['max_attribute_services_per_host']}"; + } + + // Configure the HTTP_INSPECT preprocessor + // Get global options first and put into a string + $http_inspect_global = "preprocessor http_inspect: global "; + if ($snortcfg['http_inspect'] == "off") + $http_inspect_global .= "disabled "; + $http_inspect_global .= "\\\n\tiis_unicode_map unicode.map 1252 \\\n"; + $http_inspect_global .= "\tcompress_depth 65535 \\\n"; + $http_inspect_global .= "\tdecompress_depth 65535 \\\n"; + if (!empty($snortcfg['http_inspect_memcap'])) + $http_inspect_global .= "\tmemcap {$snortcfg['http_inspect_memcap']} \\\n"; + else + $http_inspect_global .= "\tmemcap 150994944 \\\n"; + if (!empty($snortcfg['http_inspect_max_gzip_mem'])) + $http_inspect_global .= "\tmax_gzip_mem {$snortcfg['http_inspect_max_gzip_mem']}"; + else + $http_inspect_global .= "\tmax_gzip_mem 838860"; + if ($snortcfg['http_inspect_proxy_alert'] == "on") + $http_inspect_global .= " \\\n\tproxy_alert"; + + $http_inspect_default_engine = array( "name" => "default", "bind_to" => "all", "server_profile" => "all", "enable_xff" => "off", + "log_uri" => "off", "log_hostname" => "off", "server_flow_depth" => 65535, "enable_cookie" => "on", + "client_flow_depth" => 1460, "extended_response_inspection" => "on", "no_alerts" => "off", + "unlimited_decompress" => "on", "inspect_gzip" => "on", "normalize_cookies" =>"on", "normalize_headers" => "on", + "normalize_utf" => "on", "normalize_javascript" => "on", "allow_proxy_use" => "off", "inspect_uri_only" => "off", + "max_javascript_whitespaces" => 200, "post_depth" => -1, "max_headers" => 0, "max_spaces" => 0, + "max_header_length" => 0, "ports" => "default" ); + $http_ports = str_replace(",", " ", snort_expand_port_range($snort_ports['http_ports'])); + $http_inspect_servers = ""; + + // Iterate configured HTTP_INSPECT servers and write them to string if HTTP_INSPECT enabled + if ($snortcfg['http_inspect'] <> "off") { + if (!is_array($snortcfg['http_inspect_engine']['item'])) + $snortcfg['http_inspect_engine']['item'] = array(); + + // If no http_inspect_engine is configured, use the default + if (empty($snortcfg['http_inspect_engine']['item'])) + $snortcfg['http_inspect_engine']['item'][] = $http_inspect_default_engine; + + foreach ($snortcfg['http_inspect_engine']['item'] as $f => $v) { + $buffer = "preprocessor http_inspect_server: \\\n"; + if ($v['name'] == "default") + $buffer .= "\tserver default \\\n"; + elseif (is_alias($v['bind_to'])) { + $tmp = trim(filter_expand_alias($v['bind_to'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ' ', $tmp); + $buffer .= "\tserver { {$tmp} } \\\n"; + } + else { + log_error("[snort] WARNING: unable to resolve IP Address Alias [{$v['bind_to']}] for HTTP_INSPECT server '{$v['name']}' ... skipping this server engine."); + continue; + } + } + else { + log_error("[snort] WARNING: unable to resolve IP Address Alias [{$v['bind_to']}] for HTTP_INSPECT server '{$v['name']}' ... skipping this server engine."); + continue; + } + $http_inspect_servers .= $buffer; + $http_inspect_servers .= "\tprofile {$v['server_profile']} \\\n"; + + if ($v['no_alerts'] == "on") + $http_inspect_servers .= "\tno_alerts \\\n"; + + if ($v['ports'] == "default" || empty($v['ports'])) + $http_inspect_servers .= "\tports { {$http_ports} } \\\n"; + elseif (is_alias($v['ports'])) { + $tmp = trim(filter_expand_alias($v['ports'])); + if (!empty($tmp)) { + $tmp = preg_replace('/\s+/', ' ', $tmp); + $tmp = snort_expand_port_range($tmp, ' '); + $http_inspect_servers .= "\tports { {$tmp} } \\\n"; + } + else { + log_error("[snort] WARNING: unable to resolve Ports Alias [{$v['ports']}] for HTTP_INSPECT server '{$v['name']}' ... using safe default instead."); + $http_inspect_servers .= "\tports { {$http_ports} } \\\n"; + } + } + else { + log_error("[snort] WARNING: unable to resolve Ports Alias [{$v['ports']}] for HTTP_INSPECT server '{$v['name']}' ... using safe default instead."); + $http_inspect_servers .= "\tports { {$http_ports} } \\\n"; + } + + $http_inspect_servers .= "\tserver_flow_depth {$v['server_flow_depth']} \\\n"; + $http_inspect_servers .= "\tclient_flow_depth {$v['client_flow_depth']} \\\n"; + $http_inspect_servers .= "\thttp_methods { GET POST PUT SEARCH MKCOL COPY MOVE LOCK UNLOCK NOTIFY POLL BCOPY BDELETE BMOVE LINK UNLINK OPTIONS HEAD DELETE TRACE TRACK CONNECT SOURCE SUBSCRIBE UNSUBSCRIBE PROPFIND PROPPATCH BPROPFIND BPROPPATCH RPC_CONNECT PROXY_SUCCESS BITS_POST CCM_POST SMS_POST RPC_IN_DATA RPC_OUT_DATA RPC_ECHO_DATA } \\\n"; + $http_inspect_servers .= "\tpost_depth {$v['post_depth']} \\\n"; + $http_inspect_servers .= "\tmax_headers {$v['max_headers']} \\\n"; + $http_inspect_servers .= "\tmax_header_length {$v['max_header_length']} \\\n"; + $http_inspect_servers .= "\tmax_spaces {$v['max_spaces']}"; + if ($v['enable_xff'] == "on") + $http_inspect_servers .= " \\\n\tenable_xff"; + if ($v['enable_cookie'] == "on") + $http_inspect_servers .= " \\\n\tenable_cookie"; + if ($v['normalize_cookies'] == "on") + $http_inspect_servers .= " \\\n\tnormalize_cookies"; + if ($v['normalize_headers'] == "on") + $http_inspect_servers .= " \\\n\tnormalize_headers"; + if ($v['normalize_utf'] == "on") + $http_inspect_servers .= " \\\n\tnormalize_utf"; + if ($v['allow_proxy_use'] == "on") + $http_inspect_servers .= " \\\n\tallow_proxy_use"; + if ($v['inspect_uri_only'] == "on") + $http_inspect_servers .= " \\\n\tinspect_uri_only"; + if ($v['extended_response_inspection'] == "on") { + $http_inspect_servers .= " \\\n\textended_response_inspection"; + if ($v['inspect_gzip'] == "on") { + $http_inspect_servers .= " \\\n\tinspect_gzip"; + if ($v['unlimited_decompress'] == "on") + $http_inspect_servers .= " \\\n\tunlimited_decompress"; + } + if ($v['normalize_javascript'] == "on") { + $http_inspect_servers .= " \\\n\tnormalize_javascript"; + $http_inspect_servers .= " \\\n\tmax_javascript_whitespaces {$v['max_javascript_whitespaces']}"; + } + } + if ($v['log_uri'] == "on") + $http_inspect_servers .= " \\\n\tlog_uri"; + if ($v['log_hostname'] == "on") + $http_inspect_servers .= " \\\n\tlog_hostname"; + + // Add a pair of trailing newlines to terminate this server config + $http_inspect_servers .= "\n\n"; + } + /* Trim off the final trailing newline */ + $http_inspect_server = rtrim($http_inspect_server); + } + + // Finally, build the Snort configuration file + $snort_conf_text = <<<EOD +# snort configuration file +# generated automatically by the pfSense subsystems do not modify manually + +# Define Local Network # +ipvar HOME_NET [{$home_net}] +ipvar EXTERNAL_NET [{$external_net}] + +# Define Rule Paths # +var RULE_PATH {$snortcfgdir}/rules +var PREPROC_RULE_PATH {$snortcfgdir}/preproc_rules + +# Define Servers # +{$ipvardef} + +# Define Server Ports # +{$portvardef} + +# Configure quiet startup mode # +config quiet + +# Configure the snort decoder # +config checksum_mode: {$cksumcheck} +config disable_decode_alerts +config disable_tcpopt_experimental_alerts +config disable_tcpopt_obsolete_alerts +config disable_ttcp_alerts +config disable_tcpopt_alerts +config disable_ipopt_alerts +config disable_decode_drops + +# Enable the GTP decoder # +config enable_gtp + +# Configure PCRE match limitations +config pcre_match_limit: 3500 +config pcre_match_limit_recursion: 1500 + +# Configure the detection engine # +config detection: {$cfg_detect_settings} +config event_queue: max_queue 8 log 5 order_events content_length + +# Configure to show year in timestamps +config show_year + +# Configure protocol aware flushing # +# For more information see README.stream5 # +{$paf_max_pdu_config} + +# Configure dynamically loaded libraries +dynamicpreprocessor directory {$snort_dirs['dynamicpreprocessor']} +dynamicengine directory {$snort_dirs['dynamicengine']} +dynamicdetection directory {$snort_dirs['dynamicrules']} + +# Inline packet normalization. For more information, see README.normalize +# Disabled since we do not use "inline" mode with pfSense +# preprocessor normalize_ip4 +# preprocessor normalize_tcp: ips ecn stream +# preprocessor normalize_icmp4 +# preprocessor normalize_ip6 +# preprocessor normalize_icmp6 + +# Flow and stream # +{$frag3_global} + +{$frag3_engine} + +{$stream5_global} + +{$stream5_tcp_engine} + +{$stream5_udp_engine} + +{$stream5_icmp_engine} + +# HTTP Inspect # +{$http_inspect_global} + +{$http_inspect_servers} +{$snort_preprocessors} +{$host_attrib_config} + +# Snort Output Logs # +output alert_csv: alert timestamp,sig_generator,sig_id,sig_rev,msg,proto,src,srcport,dst,dstport,id,classification,priority +{$alertsystemlog_type} +{$snortunifiedlog_type} +{$spoink_type} + +# Misc Includes # +{$snort_misc_include_rules} + +{$suppress_file_name} + +# Snort user pass through configuration +{$snort_config_pass_thru} + +# Rules Selection # +{$selected_rules_sections} +EOD; + + // Write out snort.conf file + $conf = fopen("{$snortcfgdir}/snort.conf", "w"); + if(!$conf) { + log_error("Could not open {$snortcfgdir}/snort.conf for writing."); + return -1; + } + fwrite($conf, $snort_conf_text); + fclose($conf); + unset($snort_conf_text, $selected_rules_sections, $suppress_file_name, $snort_misc_include_rules, $spoink_type, $snortunifiedlog_type, $alertsystemlog_type); + unset($home_net, $external_net, $ipvardef, $portvardef); +} + +/*****************************************************************************/ +/* This starts the actual post-install code */ +/*****************************************************************************/ + +/* Hard kill any running Snort processes that may have been started by any */ +/* of the pfSense scripts such as check_reload_status() or rc.start_packages */ +if(is_process_running("snort")) { + exec("/usr/bin/killall -z snort"); + sleep(2); + // Delete any leftover snort PID files in /var/run + array_map('@unlink', glob("/var/run/snort_*.pid")); +} +// Hard kill any running Barnyard2 processes +if(is_process_running("barnyard")) { + exec("/usr/bin/killall -z barnyard2"); + sleep(2); + // Delete any leftover barnyard2 PID files in /var/run + array_map('@unlink', glob("/var/run/barnyard2_*.pid")); +} + +/* Set flag for post-install in progress */ +$g['snort_postinstall'] = true; + +/* cleanup default files */ +@rename("{$snortdir}/snort.conf-sample", "{$snortdir}/snort.conf"); +@rename("{$snortdir}/threshold.conf-sample", "{$snortdir}/threshold.conf"); +@rename("{$snortdir}/sid-msg.map-sample", "{$snortdir}/sid-msg.map"); +@rename("{$snortdir}/unicode.map-sample", "{$snortdir}/unicode.map"); +@rename("{$snortdir}/classification.config-sample", "{$snortdir}/classification.config"); +@rename("{$snortdir}/generators-sample", "{$snortdir}/generators"); +@rename("{$snortdir}/reference.config-sample", "{$snortdir}/reference.config"); +@rename("{$snortdir}/gen-msg.map-sample", "{$snortdir}/gen-msg.map"); +@rename("{$snortdir}/attribute_table.dtd-sample", "{$snortdir}/attribute_table.dtd"); + +/* fix up the preprocessor rules filenames from a PBI package install */ +$preproc_rules = array("decoder.rules", "preprocessor.rules", "sensitive-data.rules"); +foreach ($preproc_rules as $file) { + if (file_exists("{$snortdir}/preproc_rules/{$file}-sample")) + @rename("{$snortdir}/preproc_rules/{$file}-sample", "{$snortdir}/preproc_rules/{$file}"); +} + +/* Remove any previously installed scripts since we rebuild them */ +@unlink("{$snortdir}/sid"); +@unlink("{$rcdir}/snort.sh"); +@unlink("{$rcdir}/barnyard2"); + +/* remake saved settings */ +if ($config['installedpackages']['snortglobal']['forcekeepsettings'] == 'on') { + log_error(gettext("[Snort] Saved settings detected... rebuilding installation with saved settings...")); + update_status(gettext("Saved settings detected...")); + /* Do one-time settings migration for new multi-engine configurations */ + update_output_window(gettext("Please wait... migrating settings to new multi-engine configuration...")); + include "/usr/local/pkg/snort/snort_migrate_config.php"; + update_output_window(gettext("Please wait... rebuilding installation with saved settings...")); + log_error(gettext("[Snort] Downloading and updating configured rule types...")); + update_output_window(gettext("Please wait... downloading and updating configured rule types...")); + if ($pkg_interface <> "console") + $snort_gui_include = true; + include "/usr/local/pkg/snort/snort_check_for_rule_updates.php"; + update_status(gettext("Generating snort.conf configuration file from saved settings...")); + $rebuild_rules = true; + + /* Create the snort.conf files for each enabled interface */ + $snortconf = $config['installedpackages']['snortglobal']['rule']; + foreach ($snortconf as $value) { + $if_real = snort_get_real_interface($value['interface']); + + /* create a snort.conf file for interface */ + snort_build_new_conf($value); + + /* create barnyard2.conf file for interface */ + if ($value['barnyard_enable'] == 'on') + snort_create_barnyard2_conf($value, $if_real); + } + + /* create snort bootup file snort.sh */ + snort_create_rc(); + + /* Set Log Limit, Block Hosts Time and Rules Update Time */ + snort_snortloglimit_install_cron($config['installedpackages']['snortglobal']['snortloglimit'] == 'on' ? true : false); + snort_rm_blocked_install_cron($config['installedpackages']['snortglobal']['rm_blocked'] != "never_b" ? true : false); + snort_rules_up_install_cron($config['installedpackages']['snortglobal']['autorulesupdate7'] != "never_up" ? true : false); + + /* Add the recurring jobs created above to crontab */ + configure_cron(); + conf_mount_ro(); + + $rebuild_rules = false; + update_output_window(gettext("Finished rebuilding Snort configuration files...")); + log_error(gettext("[Snort] Finished rebuilding installation from saved settings...")); + + /* Only try to start Snort if not in reboot */ + if (!$g['booting']) { + update_status(gettext("Starting Snort using rebuilt configuration...")); + update_output_window(gettext("Please wait... while Snort is started...")); + log_error(gettext("[Snort] Starting Snort using rebuilt configuration...")); + start_service("snort"); + update_output_window(gettext("Snort has been started using the rebuilt configuration...")); + } +} + +/* Update Snort package version in configuration */ +$config['installedpackages']['snortglobal']['snort_config_ver'] = "3.0.1"; +write_config(); + +/* Done with post-install, so clear flag */ +unset($g['snort_postinstall']); +log_error(gettext("[Snort] Package post-installation tasks completed...")); +return true; + +?> |