diff options
Diffstat (limited to 'config/snort-old/bin')
| -rw-r--r-- | config/snort-old/bin/barnyard2 | bin | 0 -> 641791 bytes | |||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/README.contrib | 84 | ||||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/addmsg.pl | 299 | ||||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/addsid.pl | 382 | ||||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/create-sidmap.pl | 280 | ||||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/makesidex.pl | 261 | ||||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/oinkgui.pl | 1046 | ||||
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/oinkmaster.pl | 2754 | ||||
| -rwxr-xr-x | config/snort-old/bin/snort2c | bin | 0 -> 13508 bytes |
9 files changed, 5106 insertions, 0 deletions
diff --git a/config/snort-old/bin/barnyard2 b/config/snort-old/bin/barnyard2 Binary files differnew file mode 100644 index 00000000..b942e87f --- /dev/null +++ b/config/snort-old/bin/barnyard2 diff --git a/config/snort-old/bin/oinkmaster_contrib/README.contrib b/config/snort-old/bin/oinkmaster_contrib/README.contrib new file mode 100644 index 00000000..6923fa26 --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/README.contrib @@ -0,0 +1,84 @@ +# $Id: README.contrib,v 1.21 2005/10/18 10:41:20 andreas_o Exp $ # + +------------------------------------------------------------------------------- +* oinkgui.pl by Andreas Östling <andreaso@it.su.se> + + A graphical front-end to Oinkmaster written in Perl/Tk. + See README.gui for complete documentation. +------------------------------------------------------------------------------- + + + +------------------------------------------------------------------------------- +* addsid.pl by Andreas Östling <andreaso@it.su.se> + + A script that parses *.rules in all specified directories and adds a + SID to (active) rules that don't have any. (Actually, rev and classtype + are also added if missing, unless you edit addsid.pl and tune this.) The + script first looks for the current highest SID (even in inactive rules) + and starts at the next one, unless this value is below MIN_SID (defined + inside addsid.pl). By default, this value is set to 1000001 since this + is the lowest SID assigned for local usage. Handles multi-line rules. +------------------------------------------------------------------------------- + + + +------------------------------------------------------------------------------- +* create-sidmap.pl by Andreas Östling <andreaso@it.su.se> + + A script that parses all active rules in *.rules in all specified + directories and creates a SID map. (Like Snort's regen-sidmap, but this + one handles multi-line rules.) Result goes to standard output which can + be redirected to a sid-msg.map file. +------------------------------------------------------------------------------- + + + +------------------------------------------------------------------------------- +* makesidex.pl, originally by Jerry Applebaum but later rewritten by + Andreas Östling <andreaso@it.su.se> to handle multi-line rules and + multiple rules directories. + + It reads *.rules in all specified directories, looks for all disabled + rules and prints a "disablesid <sid> # <msg>" line for each disabled rule. + The output can be appended to oinkmaster.conf. + Useful to new Oinkmaster users. +------------------------------------------------------------------------------- + + + +------------------------------------------------------------------------------- +* addmsg.pl by Andreas Östling <andreaso@it.su.se>: + + A script that will parse your oinkmaster.conf for + localsid/enablesid/disablesid lines and add their rule message as a #comment. + If your oinkmaster.conf looks like this before addmsg.pl has been run: + + disablesid 286 + disablesid 287 + disablesid 288 + + It will look something like this afterward: + + disablesid 286 # POP3 EXPLOIT x86 bsd overflow + disablesid 287 # POP3 EXPLOIT x86 bsd overflow + disablesid 288 # POP3 EXPLOIT x86 linux overflow + + addmsg.pl will not touch lines that already has a comment in them. + It's not able to handle SID lists when written like this: + disablesid 1,2,3, ... + But it should handle them if written like this: + disablesid \ + 1, \ + 2, \ + 3 + + The new config file will be printed to standard output, so you + probably want to redirect the output to a file, for example: + + ./addmsg.pl oinkmaster.conf rules/ > oinkmaster.conf.new + + If oinkmaster.conf.new looks ok, simply rename it to oinkmaster.conf. + Do NOT redirect to the same file you read from, as this will destroy + that file. +------------------------------------------------------------------------------- diff --git a/config/snort-old/bin/oinkmaster_contrib/addmsg.pl b/config/snort-old/bin/oinkmaster_contrib/addmsg.pl new file mode 100644 index 00000000..e5866d6f --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/addmsg.pl @@ -0,0 +1,299 @@ +#!/usr/bin/perl -w + +# $Id: addmsg.pl,v 1.19 2005/12/31 13:42:46 andreas_o Exp $ # + +# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above +# copyright notice, this list of conditions and the following +# disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the author nor the names of its +# contributors may be used to endorse or promote products +# derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +use strict; + +sub get_next_entry($ $ $ $ $ $); +sub parse_singleline_rule($ $ $); + + +my $USAGE = << "RTFM"; + +Parse Oinkmaster configuration file and add the rule's "msg" string as a +#comment for each disablesid/enablesid line. + +Usage: $0 <oinkmaster.conf> <rulesdir> [rulesdir2, ...] + +The new config file will be printed to standard output, so you +probably want to redirect the output to a new file (*NOT* the same +file you used as input, because that will destroy the file!). +For example: + +$0 /etc/oinkmaster.conf /etc/rules/ > oinkmaster.conf.new + +If oinkmaster.conf.new looks ok, simply rename it to /etc/oinkmaster.conf. + +RTFM + + +# Regexp to match the start of a multi-line rule. +# %ACTIONS% will be replaced with content of $config{actions} later. +my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.*\\\\\s*\n$'; # '; + +# Regexp to match a single-line rule. +my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.+;\s*\)\s*$'; # '; + + +my $config = shift || die($USAGE); + +my @rulesdirs = @ARGV; +die($USAGE) unless ($#rulesdirs > -1); + +my $verbose = 1; +my (%sidmsgmap, %config); + +$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic"; + +$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; +$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; + + + +# Read in oinkmaster.conf. +open(CONFIG, "<" , "$config") or die("could not open \"$config\" for reading: $!\n"); +my @config = <CONFIG>; +close(CONFIG); + + +# Read in *.rules in all rulesdirs and create %sidmsgmap ($sidmsgmap{sid} = msg). +foreach my $rulesdir (@rulesdirs) { + opendir(RULESDIR, "$rulesdir") or die("could not open \"$rulesdir\": $!\n"); + + while (my $file = readdir(RULESDIR)) { + next unless ($file =~ /\.rules$/); + + open(FILE, "<", "$rulesdir/$file") or die("could not open \"$rulesdir/$file\": $!\n"); + my @file = <FILE>; + close(FILE); + + my ($single, $multi, $nonrule, $msg, $sid); + + while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + $sidmsgmap{$sid} = $msg + if (defined($single)); + } + } +} + + +# Print new oinkmaster.conf. +while ($_ = shift(@config)) { + if (/^\s*(?:disable|enable|local)sid\s+(\d+)\s*$/ || /^\s*(\d+)\s*,\s*\\$/ || /^\s*(\d+)\s*$/) { + my $sid = $1; + my $is_multiline = 0; + chomp; + + if (/\\$/) { + $is_multiline = 1; + s/\\$//; + } + + $_ = sprintf("%-25s", $_); + if (exists($sidmsgmap{$sid})) { + print "$_ # $sidmsgmap{$sid}"; + } else { + print "$_"; + } + print " \\" if ($is_multiline); + print "\n"; + } else { + print; + } +} + + + +# From oinkmaster.pl. +sub get_next_entry($ $ $ $ $ $) +{ + my $arr_ref = shift; + my $single_ref = shift; + my $multi_ref = shift; + my $nonrule_ref = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + undef($$single_ref); + undef($$multi_ref); + undef($$nonrule_ref); + undef($$msg_ref); + undef($$sid_ref); + + my $line = shift(@$arr_ref) || return(0); + my $disabled = 0; + my $broken = 0; + + # Possible beginning of multi-line rule? + if ($line =~ /$MULTILINE_RULE_REGEXP/oi) { + $$single_ref = $line; + $$multi_ref = $line; + + $disabled = 1 if ($line =~ /^\s*#/); + + # Keep on reading as long as line ends with "\". + while (!$broken && $line =~ /\\\s*\n$/) { + + # Remove trailing "\" and newline for single-line version. + $$single_ref =~ s/\\\s*\n//; + + # If there are no more lines, this can not be a valid multi-line rule. + if (!($line = shift(@$arr_ref))) { + + warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n") + if ($config{verbose}); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + + # Multi-line continuation. + $$multi_ref .= $line; + + # If there are non-comment lines in the middle of a disabled rule, + # mark the rule as broken to return as non-rule lines. + if ($line !~ /^\s*#/ && $disabled) { + $broken = 1; + } elsif ($line =~ /^\s*#/ && !$disabled) { + # comment line (with trailing slash) in the middle of an active rule - ignore it + } else { + $line =~ s/^\s*#*\s*//; # remove leading # in single-line version + $$single_ref .= $line; + } + + } # while line ends with "\" + + # Single-line version should now be a valid rule. + # If not, it wasn't a valid multi-line rule after all. + if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) { + + $$single_ref =~ s/^\s*//; # remove leading whitespaces + $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading # + $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + $$multi_ref =~ s/^\s*//; + $$multi_ref =~ s/\s*\n$/\n/; + $$multi_ref =~ s/^#+\s*/#/; + + return (1); # return multi + } else { + warn("\nWARNING: invalid multi-line rule: $$single_ref\n") + if ($config{verbose} && $$multi_ref !~ /^\s*#/); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) { + $$single_ref = $line; + $$single_ref =~ s/^\s*//; + $$single_ref =~ s/^#+\s*/#/; + $$single_ref =~ s/\s*\n$/\n/; + + return (1); # return single + } else { # non-rule line + + # Do extra check and warn if it *might* be a rule anyway, + # but that we just couldn't parse for some reason. + warn("\nWARNING: line may be a rule but it could not be parsed ". + "(missing sid or msg?): $line\n") + if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/); + + $$nonrule_ref = $line; + $$nonrule_ref =~ s/\s*\n$/\n/; + + return (1); # return non-rule + } +} + + + +# From oinkmaster.pl. +sub parse_singleline_rule($ $ $) +{ + my $line = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) { + + if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) { + $$msg_ref = $1; + } else { + return (0); + } + + if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) { + $$sid_ref = $1; + } else { + return (0); + } + + return (1); + } + + return (0); +} diff --git a/config/snort-old/bin/oinkmaster_contrib/addsid.pl b/config/snort-old/bin/oinkmaster_contrib/addsid.pl new file mode 100644 index 00000000..64255d22 --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/addsid.pl @@ -0,0 +1,382 @@ +#!/usr/bin/perl -w + +# $Id: addsid.pl,v 1.30 2005/12/31 13:42:46 andreas_o Exp $ # + +# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above +# copyright notice, this list of conditions and the following +# disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the author nor the names of its +# contributors may be used to endorse or promote products +# derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +use strict; + + +sub get_next_entry($ $ $ $ $ $); +sub parse_singleline_rule($ $ $); +sub get_next_available_sid(@); + + +# Set this to the default classtype you want to add, if missing. +# Set to 0 or "" if you don't want to add a classtype. +my $CLASSTYPE = "misc-attack"; + +# If ADD_REV is set to 1, "rev: 1;" will be added to rule if it has no rev. +# Set to 0 if you don't want to add it. +my $ADD_REV = 1; + +# Minimum SID to add. Normally, the next available SID will be used, +# unless it's below this value. Only SIDs >= 1000000 are reserved for +# personal use. +my $MIN_SID = 1000001; + +# Regexp to match the start of a multi-line rule. +# %ACTIONS% will be replaced with content of $config{actions} later. +my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.*\\\\\s*\n$'; # '; + +# Regexp to match a single-line rule. +my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.+;\s*\)\s*$'; # '; + + +my $USAGE = << "RTFM"; + +Parse *.rules in one or more directories and add "sid:<sid>;" to +active rules that don't have any "sid" entry, starting with the next +available SID after parsing all rules files (but $MIN_SID at minumum). +Also, "rev:1;" is added to rules without a "rev" entry, and +"classtype:misc-attack;" is added to rules without a "classtype" entry +(edit options at the top of $0 if you want to change this). + +Usage: $0 <rulesdir> [rulesdir2, ...] + +RTFM + + +# Start in verbose mode. +my $verbose = 1; + +my (%all_sids, %active_sids, %config); + +my @rulesdirs = @ARGV; + +die($USAGE) unless ($#rulesdirs > -1); + +$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic"; + +$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; +$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; + + +# Find out the next available SID. +my $next_sid = get_next_available_sid(@rulesdirs); + +# Avoid seeing possible warnings about broken rules twice. +$verbose = 0; + +# Add sid/rev/classtype to active rules that don't have any. +foreach my $dir (@rulesdirs) { + opendir(RULESDIR, "$dir") or die("could not open \"$dir\": $!\n"); + + while (my $file = readdir(RULESDIR)) { + next unless ($file =~ /\.rules$/); + + open(OLDFILE, "$dir/$file") + or die("could not open \"$dir/$file\": $!\n"); + my @file = <OLDFILE>; + close(OLDFILE); + + open(NEWFILE, ">", "$dir/$file") + or die("could not open \"$dir/$file\" for writing: $!\n"); + + my ($single, $multi, $nonrule, $msg, $sid); + while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + + if (defined($nonrule)) { + print NEWFILE "$nonrule"; + next; + } + + $multi = $single unless (defined($multi)); + + # Don't care about inactive rules. + if ($single =~ /^\s*#/) { + print NEWFILE "$multi"; + next; + } + + my $added; + + # Add SID. + if ($single !~ /sid\s*:\s*\d+\s*;/) { + $added .= "SID $next_sid,"; + $multi =~ s/\)\s*\n/sid:$next_sid;)\n/; + $next_sid++; + } + + # Add revision. + if ($ADD_REV && $single !~ /rev\s*:\s*\d+\s*;/) { + $added .= "rev,"; + $multi =~ s/\)\s*\n/rev:1;)\n/; + } + + # Add classtype. + if ($CLASSTYPE && $single !~ /classtype\s*:\s*.+\s*;/) { + $added .= "classtype $CLASSTYPE,"; + $multi =~ s/\)\s*\n/classtype:$CLASSTYPE;)\n/; + } + + if (defined($added)) { + $added =~ s/,$//; + print "Adding $added to rule \"$msg\"\n" + if (defined($added)); + } + + print NEWFILE "$multi"; + } + + close(NEWFILE); + } + + closedir(RULESDIR); +} + + + +# Read in *.rules in given directory and return highest SID. +sub get_next_available_sid(@) +{ + my @dirs = @_; + + foreach my $dir (@dirs) { + opendir(RULESDIR, "$dir") or die("could not open \"$dir\": $!\n"); + + # Only care about *.rules. + while (my $file = readdir(RULESDIR)) { + next unless ($file =~ /\.rules$/); + + open(OLDFILE, "<$dir/$file") or die("could not open \"$dir/$file\": $!\n"); + my @file = <OLDFILE>; + close(OLDFILE); + + my ($single, $multi, $nonrule, $msg, $sid); + + while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + if (defined($single) && defined($sid)) { + $all_sids{$sid}++; + + # If this is an active rule add to %active_sids and + # warn if it already exists. + if ($single =~ /^\s*alert/) { + print STDERR "WARNING: duplicate SID: $sid\n" + if (exists($active_sids{$sid})); + $active_sids{$sid}++ + } + } + } + } + } + + # Sort sids and use highest one + 1, unless it's below MIN_SID. + @_ = sort {$a <=> $b} keys(%all_sids); + my $sid = pop(@_); + + if (!defined($sid)) { + $sid = $MIN_SID + } else { + $sid++; + } + + # If it's below MIN_SID, use MIN_SID instead. + $sid = $MIN_SID if ($sid < $MIN_SID); + + return ($sid) +} + + + +sub get_next_entry($ $ $ $ $ $) +{ + my $arr_ref = shift; + my $single_ref = shift; + my $multi_ref = shift; + my $nonrule_ref = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + undef($$single_ref); + undef($$multi_ref); + undef($$nonrule_ref); + undef($$msg_ref); + undef($$sid_ref); + + my $line = shift(@$arr_ref) || return(0); + my $disabled = 0; + my $broken = 0; + + # Possible beginning of multi-line rule? + if ($line =~ /$MULTILINE_RULE_REGEXP/oi) { + $$single_ref = $line; + $$multi_ref = $line; + + $disabled = 1 if ($line =~ /^\s*#/); + + # Keep on reading as long as line ends with "\". + while (!$broken && $line =~ /\\\s*\n$/) { + + # Remove trailing "\" and newline for single-line version. + $$single_ref =~ s/\\\s*\n//; + + # If there are no more lines, this can not be a valid multi-line rule. + if (!($line = shift(@$arr_ref))) { + + warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n") + if ($config{verbose}); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + + # Multi-line continuation. + $$multi_ref .= $line; + + # If there are non-comment lines in the middle of a disabled rule, + # mark the rule as broken to return as non-rule lines. + if ($line !~ /^\s*#/ && $disabled) { + $broken = 1; + } elsif ($line =~ /^\s*#/ && !$disabled) { + # comment line (with trailing slash) in the middle of an active rule - ignore it + } else { + $line =~ s/^\s*#*\s*//; # remove leading # in single-line version + $$single_ref .= $line; + } + + } # while line ends with "\" + + # Single-line version should now be a valid rule. + # If not, it wasn't a valid multi-line rule after all. + if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) { + + $$single_ref =~ s/^\s*//; # remove leading whitespaces + $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading # + $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + $$multi_ref =~ s/^\s*//; + $$multi_ref =~ s/\s*\n$/\n/; + $$multi_ref =~ s/^#+\s*/#/; + + return (1); # return multi + } else { + warn("\nWARNING: invalid multi-line rule: $$single_ref\n") + if ($config{verbose} && $$multi_ref !~ /^\s*#/); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) { + $$single_ref = $line; + $$single_ref =~ s/^\s*//; + $$single_ref =~ s/^#+\s*/#/; + $$single_ref =~ s/\s*\n$/\n/; + + return (1); # return single + } else { # non-rule line + + # Do extra check and warn if it *might* be a rule anyway, + # but that we just couldn't parse for some reason. + warn("\nWARNING: line may be a rule but it could not be parsed ". + "(missing sid or msg?): $line\n") + if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/); + + $$nonrule_ref = $line; + $$nonrule_ref =~ s/\s*\n$/\n/; + + return (1); # return non-rule + } +} + + + +# From oinkmaster.pl except that this version +# has been modified so that the sid is *optional*. +sub parse_singleline_rule($ $ $) +{ + my $line = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) { + + if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) { + $$msg_ref = $1; + } else { + return (0); + } + + if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) { + $$sid_ref = $1; +# } else { +# return (0); + } + + return (1); + } + + return (0); +} diff --git a/config/snort-old/bin/oinkmaster_contrib/create-sidmap.pl b/config/snort-old/bin/oinkmaster_contrib/create-sidmap.pl new file mode 100644 index 00000000..26a9040c --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/create-sidmap.pl @@ -0,0 +1,280 @@ +#!/usr/local/bin/perl -w + +# $Id: create-sidmap.pl,v 1.21 2005/12/31 13:42:46 andreas_o Exp $ # + +# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above +# copyright notice, this list of conditions and the following +# disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the author nor the names of its +# contributors may be used to endorse or promote products +# derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +use strict; + +sub get_next_entry($ $ $ $ $ $); +sub parse_singleline_rule($ $ $); + +# Files to ignore. +my %skipfiles = ( + 'deleted.rules' => 1, +); + +# Regexp to match the start of a multi-line rule. +# %ACTIONS% will be replaced with content of $config{actions} later. +my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.*\\\\\s*\n$'; # '; + +# Regexp to match a single-line rule. +my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.+;\s*\)\s*$'; # '; + +my $USAGE = << "RTFM"; + +Parse active rules in *.rules in one or more directories and create a SID +map. Result is sent to standard output, which can be redirected to a +sid-msg.map file. + +Usage: $0 <rulesdir> [rulesdir2, ...] + +RTFM + +my $verbose = 1; + +my (%sidmap, %config); + +my @rulesdirs = @ARGV; + +die($USAGE) unless ($#rulesdirs > -1); + +$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic"; + +$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; +$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; + + +# Read in all rules from each rules file (*.rules) in each rules dir. +# into %sidmap. +foreach my $rulesdir (@rulesdirs) { + opendir(RULESDIR, "$rulesdir") or die("could not open \"$rulesdir\": $!\n"); + + while (my $file = readdir(RULESDIR)) { + next unless ($file =~ /\.rules$/); + next if ($skipfiles{$file}); + + open(FILE, "$rulesdir/$file") or die("could not open \"$rulesdir/$file\": $!\n"); + my @file = <FILE>; + close(FILE); + + my ($single, $multi, $nonrule, $msg, $sid); + + while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + if (defined($single)) { + + warn("WARNING: duplicate SID: $sid (discarding old)\n") + if (exists($sidmap{$sid})); + + $sidmap{$sid} = "$sid || $msg"; + + # Print all references. Borrowed from Brian Caswell's regen-sidmap script. + my $ref = $single; + while ($ref =~ s/(.*)reference\s*:\s*([^\;]+)(.*)$/$1 $3/) { + $sidmap{$sid} .= " || $2" + } + + $sidmap{$sid} .= "\n"; + } + } + } +} + +# Print results. +foreach my $sid (sort { $a <=> $b } keys(%sidmap)) { + print "$sidmap{$sid}"; +} + + + +# Same as in oinkmaster.pl. +sub get_next_entry($ $ $ $ $ $) +{ + my $arr_ref = shift; + my $single_ref = shift; + my $multi_ref = shift; + my $nonrule_ref = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + undef($$single_ref); + undef($$multi_ref); + undef($$nonrule_ref); + undef($$msg_ref); + undef($$sid_ref); + + my $line = shift(@$arr_ref) || return(0); + my $disabled = 0; + my $broken = 0; + + # Possible beginning of multi-line rule? + if ($line =~ /$MULTILINE_RULE_REGEXP/oi) { + $$single_ref = $line; + $$multi_ref = $line; + + $disabled = 1 if ($line =~ /^\s*#/); + + # Keep on reading as long as line ends with "\". + while (!$broken && $line =~ /\\\s*\n$/) { + + # Remove trailing "\" and newline for single-line version. + $$single_ref =~ s/\\\s*\n//; + + # If there are no more lines, this can not be a valid multi-line rule. + if (!($line = shift(@$arr_ref))) { + + warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n") + if ($config{verbose}); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + + # Multi-line continuation. + $$multi_ref .= $line; + + # If there are non-comment lines in the middle of a disabled rule, + # mark the rule as broken to return as non-rule lines. + if ($line !~ /^\s*#/ && $disabled) { + $broken = 1; + } elsif ($line =~ /^\s*#/ && !$disabled) { + # comment line (with trailing slash) in the middle of an active rule - ignore it + } else { + $line =~ s/^\s*#*\s*//; # remove leading # in single-line version + $$single_ref .= $line; + } + + } # while line ends with "\" + + # Single-line version should now be a valid rule. + # If not, it wasn't a valid multi-line rule after all. + if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) { + + $$single_ref =~ s/^\s*//; # remove leading whitespaces + $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading # + $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + $$multi_ref =~ s/^\s*//; + $$multi_ref =~ s/\s*\n$/\n/; + $$multi_ref =~ s/^#+\s*/#/; + + return (1); # return multi + } else { + warn("\nWARNING: invalid multi-line rule: $$single_ref\n") + if ($config{verbose} && $$multi_ref !~ /^\s*#/); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) { + $$single_ref = $line; + $$single_ref =~ s/^\s*//; + $$single_ref =~ s/^#+\s*/#/; + $$single_ref =~ s/\s*\n$/\n/; + + return (1); # return single + } else { # non-rule line + + # Do extra check and warn if it *might* be a rule anyway, + # but that we just couldn't parse for some reason. + warn("\nWARNING: line may be a rule but it could not be parsed ". + "(missing sid or msg?): $line\n") + if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/); + + $$nonrule_ref = $line; + $$nonrule_ref =~ s/\s*\n$/\n/; + + return (1); # return non-rule + } +} + + + +# Same as in oinkmaster.pl. +sub parse_singleline_rule($ $ $) +{ + my $line = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) { + + if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) { + $$msg_ref = $1; + } else { + return (0); + } + + if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) { + $$sid_ref = $1; + } else { + return (0); + } + + return (1); + } + + return (0); +} diff --git a/config/snort-old/bin/oinkmaster_contrib/makesidex.pl b/config/snort-old/bin/oinkmaster_contrib/makesidex.pl new file mode 100644 index 00000000..80354735 --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/makesidex.pl @@ -0,0 +1,261 @@ +#!/usr/bin/perl -w + +# $Id: makesidex.pl,v 1.11 2005/12/31 13:42:46 andreas_o Exp $ # + +# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above +# copyright notice, this list of conditions and the following +# disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the author nor the names of its +# contributors may be used to endorse or promote products +# derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +use strict; + +sub get_next_entry($ $ $ $ $ $); +sub parse_singleline_rule($ $ $); + + +# Regexp to match the start of a multi-line rule. +# %ACTIONS% will be replaced with content of $config{actions} later. +my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.*\\\\\s*\n$'; # '; + +# Regexp to match a single-line rule. +my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.+;\s*\)\s*$'; # '; + +my $USAGE = << "RTFM"; + +Parse *.rules in one or more directories and look for all rules that are +disabled (i.e. begin with "#") and print "disablesid <sid> # <msg>" to +standard output for all those rules. This output can be redirected to a +file, which will be understood by Oinkmaster. + +Usage: $0 <rulesdir> [rulesdir2, ...] + +RTFM + +my $verbose = 1; + +my (%disabled, %config); + +my @rulesdirs = @ARGV; + +die($USAGE) unless ($#rulesdirs > -1); + +$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic"; + +$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; +$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; + +foreach my $rulesdir (@rulesdirs) { + opendir(RULESDIR, "$rulesdir") or die("could not open \"$rulesdir\": $!\n"); + + while (my $file = readdir(RULESDIR)) { + next unless ($file =~ /\.rules$/); + + open(FILE, "$rulesdir/$file") or die("could not open \"$rulesdir/$file\": $!\n"); + my @file = <FILE>; + close(FILE); + + my ($single, $multi, $nonrule, $msg, $sid); + + while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + $single = $multi if (defined($multi)); + $disabled{$sid} = $msg + if (defined($single) && $single =~ /^\s*#/); + } + } +} + +# Print results. +foreach my $sid (sort { $a <=> $b } keys(%disabled)) { + printf("%-25s # %s\n", "disablesid $sid", $disabled{$sid}); +} + + + +# Same as in oinkmaster.pl. +sub get_next_entry($ $ $ $ $ $) +{ + my $arr_ref = shift; + my $single_ref = shift; + my $multi_ref = shift; + my $nonrule_ref = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + undef($$single_ref); + undef($$multi_ref); + undef($$nonrule_ref); + undef($$msg_ref); + undef($$sid_ref); + + my $line = shift(@$arr_ref) || return(0); + my $disabled = 0; + my $broken = 0; + + # Possible beginning of multi-line rule? + if ($line =~ /$MULTILINE_RULE_REGEXP/oi) { + $$single_ref = $line; + $$multi_ref = $line; + + $disabled = 1 if ($line =~ /^\s*#/); + + # Keep on reading as long as line ends with "\". + while (!$broken && $line =~ /\\\s*\n$/) { + + # Remove trailing "\" and newline for single-line version. + $$single_ref =~ s/\\\s*\n//; + + # If there are no more lines, this can not be a valid multi-line rule. + if (!($line = shift(@$arr_ref))) { + + warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n") + if ($config{verbose}); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + + # Multi-line continuation. + $$multi_ref .= $line; + + # If there are non-comment lines in the middle of a disabled rule, + # mark the rule as broken to return as non-rule lines. + if ($line !~ /^\s*#/ && $disabled) { + $broken = 1; + } elsif ($line =~ /^\s*#/ && !$disabled) { + # comment line (with trailing slash) in the middle of an active rule - ignore it + } else { + $line =~ s/^\s*#*\s*//; # remove leading # in single-line version + $$single_ref .= $line; + } + + } # while line ends with "\" + + # Single-line version should now be a valid rule. + # If not, it wasn't a valid multi-line rule after all. + if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) { + + $$single_ref =~ s/^\s*//; # remove leading whitespaces + $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading # + $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + $$multi_ref =~ s/^\s*//; + $$multi_ref =~ s/\s*\n$/\n/; + $$multi_ref =~ s/^#+\s*/#/; + + return (1); # return multi + } else { + warn("\nWARNING: invalid multi-line rule: $$single_ref\n") + if ($config{verbose} && $$multi_ref !~ /^\s*#/); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) { + $$single_ref = $line; + $$single_ref =~ s/^\s*//; + $$single_ref =~ s/^#+\s*/#/; + $$single_ref =~ s/\s*\n$/\n/; + + return (1); # return single + } else { # non-rule line + + # Do extra check and warn if it *might* be a rule anyway, + # but that we just couldn't parse for some reason. + warn("\nWARNING: line may be a rule but it could not be parsed ". + "(missing sid or msg?): $line\n") + if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/); + + $$nonrule_ref = $line; + $$nonrule_ref =~ s/\s*\n$/\n/; + + return (1); # return non-rule + } +} + + + +# Same as in oinkmaster.pl. +sub parse_singleline_rule($ $ $) +{ + my $line = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) { + + if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) { + $$msg_ref = $1; + } else { + return (0); + } + + if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) { + $$sid_ref = $1; + } else { + return (0); + } + + return (1); + } + + return (0); +} diff --git a/config/snort-old/bin/oinkmaster_contrib/oinkgui.pl b/config/snort-old/bin/oinkmaster_contrib/oinkgui.pl new file mode 100644 index 00000000..4e96f7db --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/oinkgui.pl @@ -0,0 +1,1046 @@ +#!/usr/bin/perl -w + +# $Id: oinkgui.pl,v 1.52 2005/12/31 13:42:46 andreas_o Exp $ # + +# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above +# copyright notice, this list of conditions and the following +# disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the author nor the names of its +# contributors may be used to endorse or promote products +# derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +use 5.006001; + +use strict; +use File::Spec; +use Tk; +use Tk::Balloon; +use Tk::BrowseEntry; +use Tk::FileSelect; +use Tk::NoteBook; +use Tk::ROText; + +use constant CSIDL_DRIVES => 17; + +sub update_rules(); +sub clear_messages(); +sub create_cmdline($); +sub fileDialog($ $ $ $); +sub load_config(); +sub save_config(); +sub save_messages(); +sub update_file_label_color($ $ $); +sub create_fileSelectFrame($ $ $ $ $ $); +sub create_checkbutton($ $ $); +sub create_radiobutton($ $ $); +sub create_actionbutton($ $ $); +sub execute_oinkmaster(@); +sub logmsg($ $); + + +my $version = 'Oinkmaster GUI v1.1'; + +my @oinkmaster_conf = qw( + /etc/oinkmaster.conf + /usr/local/etc/oinkmaster.conf +); + +# List of URLs that will show up in the URL BrowseEntry. +my @urls = qw( + http://www.bleedingsnort.com/bleeding.rules.tar.gz + http://www.snort.org/pub-bin/downloads.cgi/Download/comm_rules/Community-Rules.tar.gz + http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-CURRENT.tar.gz + http://www.snort.org/pub-bin/oinkmaster.cgi/<oinkcode>/snortrules-snapshot-2.3.tar.gz +); + +my %color = ( + background => 'Bisque3', + button => 'Bisque2', + label => 'Bisque1', + notebook_bg => 'Bisque2', + notebook_inact => 'Bisque3', + file_label_ok => '#00e000', + file_label_not_ok => 'red', + out_frame_fg => 'white', + out_frame_bg => 'black', + entry_bg => 'white', + button_active => 'white', + button_bg => 'Bisque4', +); + +my %config = ( + animate => 1, + careful => 0, + enable_all => 0, + check_removed => 0, + output_mode => 'normal', + diff_mode => 'detailed', + perl => $^X, + oinkmaster => "", + oinkmaster_conf => "", + outdir => "", + url => "", + varfile => "", + backupdir => "", + editor => "", +); + +my %help = ( + + # File locations. + oinkscript => 'Location of the executable Oinkmaster script (oinkmaster.pl).', + oinkconf => 'The Oinkmaster configuration file to use.', + outdir => 'Where to put the new rules. This should be the directory where you '. + 'store your current rules.', + + url => 'Alternate location of rules archive to download/copy. '. + 'Leave empty to use the location set in oinkmaster.conf.', + varfile => 'Variables that exist in downloaded snort.conf but not in '. + 'this file will be added to it. Leave empty to skip.', + backupdir => 'Directory to put tarball of old rules before overwriting them. '. + 'Leave empty to skip backup.', + editor => 'Full path to editor to execute when pressing the "edit" button '. + '(wordpad is recommended on Windows). ', + + # Checkbuttons. + careful => 'In careful mode, Oinkmaster will just check for changes, '. + 'not update anything.', + enable => 'Some rules may be commented out by default (for a reason!). '. + 'This option will make Oinkmaster enable those.', + removed => 'Check for rules files that exist in the output directory but not '. + 'in the downloaded rules archive.', + + # Action buttons. + clear => 'Clear current output messages.', + save => 'Save current output messages to file.', + exit => 'Exit the GUI.', + update => 'Execute Oinkmaster to update the rules.', + test => 'Test current Oinkmaster configuration. ' . + 'If there are no fatal errors, you are ready to update the rules.', + version => 'Request version information from Oinkmaster.', +); + + +my $gui_config_file = ""; +my $use_fileop = 0; + + +#### MAIN #### + +select STDERR; +$| = 1; +select STDOUT; +$| = 1; + +# Find out if can use Win32::FileOp. +if ($^O eq 'MSWin32') { + BEGIN { $^W = 0 } + $use_fileop = 1 if (eval "require Win32::FileOp"); +} + +# Find out which oinkmaster.pl file to default to. +foreach my $dir (File::Spec->path()) { + my $file = "$dir/oinkmaster"; + if (-f "$file" && (-x "$file" || $^O eq 'MSWin32')) { + $config{oinkmaster} = $file; + last; + } elsif (-f "$file.pl" && (-x "$file" || $^O eq 'MSWin32')) { + $config{oinkmaster} = "$file.pl"; + last; + } +} + +# Find out which oinkmaster config file to default to. +foreach my $file (@oinkmaster_conf) { + if (-e "$file") { + $config{oinkmaster_conf} = $file; + last; + } +} + +# Find out where the GUI config file is (it's not required). +if ($ENV{HOME}) { + $gui_config_file = "$ENV{HOME}/.oinkguirc" +} elsif ($ENV{HOMEDRIVE} && $ENV{HOMEPATH}) { + $gui_config_file = "$ENV{HOMEDRIVE}$ENV{HOMEPATH}\\.oinkguirc"; +} + + +# Create main window. +my $main = MainWindow->new( + -background => "$color{background}", + -title => "$version", +); + + +# Create scrolled frame with output messages. +my $out_frame = $main->Scrolled('ROText', + -setgrid => 'true', + -scrollbars => 'e', + -background => $color{out_frame_bg}, + -foreground => $color{out_frame_fg}, +); + + +my $help_label = $main->Label( + -relief => 'groove', + -background => "$color{label}", +); + +my $balloon = $main->Balloon( + -statusbar => $help_label, +); + + +# Create notebook. +my $notebook = $main->NoteBook( + -ipadx => 6, + -ipady => 6, + -background => $color{notebook_bg}, + -inactivebackground => $color{notebook_inact}, + -backpagecolor => $color{background}, +); + + +# Create tab with required files/dirs. +my $req_tab = $notebook->add("required", + -label => "Required files and directories", + -underline => 0, +); + +$req_tab->configure(-bg => "$color{notebook_inact}"); + + +# Create frame with oinkmaster.pl location. +my $filetypes = [ + ['Oinkmaster script', 'oinkmaster.pl'], + ['All files', '*' ] +]; + +my $oinkscript_frame = + create_fileSelectFrame($req_tab, "oinkmaster.pl", 'EXECFILE', + \$config{oinkmaster}, 'NOEDIT', $filetypes); + +$balloon->attach($oinkscript_frame, -statusmsg => $help{oinkscript}); + + +# Create frame with oinkmaster.conf location. +$filetypes = [ + ['configuration files', '.conf'], + ['All files', '*' ] +]; + +my $oinkconf_frame = + create_fileSelectFrame($req_tab, "oinkmaster.conf", 'ROFILE', + \$config{oinkmaster_conf}, 'EDIT', $filetypes); + +$balloon->attach($oinkconf_frame, -statusmsg => $help{oinkconf}); + + +# Create frame with output directory. +my $outdir_frame = + create_fileSelectFrame($req_tab, "output directory", 'WRDIR', + \$config{outdir}, 'NOEDIT', undef); + +$balloon->attach($outdir_frame, -statusmsg => $help{outdir}); + + + +# Create tab with optional files/dirs. +my $opt_tab = $notebook->add("optional", + -label => "Optional files and directories", + -underline => 0, +); + +$opt_tab->configure(-bg => "$color{notebook_inact}"); + +# Create frame with alternate URL location. +$filetypes = [ + ['compressed tar files', '.tar.gz'] +]; + +my $url_frame = + create_fileSelectFrame($opt_tab, "Alternate URL", 'URL', + \$config{url}, 'NOEDIT', $filetypes); + +$balloon->attach($url_frame, -statusmsg => $help{url}); + + +# Create frame with variable file. +$filetypes = [ + ['Snort configuration files', ['.conf', '.config']], + ['All files', '*' ] +]; + +my $varfile_frame = + create_fileSelectFrame($opt_tab, "Variable file", 'WRFILE', + \$config{varfile}, 'EDIT', $filetypes); + +$balloon->attach($varfile_frame, -statusmsg => $help{varfile}); + + +# Create frame with backup dir location. +my $backupdir_frame = + create_fileSelectFrame($opt_tab, "Backup directory", 'WRDIR', + \$config{backupdir}, 'NOEDIT', undef); + +$balloon->attach($backupdir_frame, -statusmsg => $help{backupdir}); + + +# Create frame with editor location. +$filetypes = [ + ['executable files', ['.exe']], + ['All files', '*' ] +]; + +my $editor_frame = + create_fileSelectFrame($opt_tab, "Editor", 'EXECFILE', + \$config{editor}, 'NOEDIT', $filetypes); + +$balloon->attach($editor_frame, -statusmsg => $help{editor}); + + + +$notebook->pack( + -expand => 'no', + -fill => 'x', + -padx => '5', + -pady => '5', + -side => 'top' +); + + +# Create the frame to the left. +my $left_frame = $main->Frame( + -background => "$color{label}", + -border => '2', +)->pack( + -side => 'left', + -fill => 'y', +); + + +# Create "GUI settings" label. +$left_frame->Label( + -text => "GUI settings:", + -background => "$color{label}", +)->pack( + -side => 'top', + -fill => 'x', +); + + +create_actionbutton($left_frame, "Load saved settings", \&load_config); +create_actionbutton($left_frame, "Save current settings", \&save_config); + + +# Create "options" label at the top of the left frame. +$left_frame->Label( + -text => "Options:", + -background => "$color{label}", +)->pack(-side => 'top', + -fill => 'x', +); + + +# Create checkbuttons in the left frame. +$balloon->attach( + create_checkbutton($left_frame, "Careful mode", \$config{careful}), + -statusmsg => $help{careful} +); + +$balloon->attach( + create_checkbutton($left_frame, "Enable all", \$config{enable_all}), + -statusmsg => $help{enable} +); + +$balloon->attach( + create_checkbutton($left_frame, "Check for removed files", \$config{check_removed}), + -statusmsg => $help{removed} +); + + +# Create "mode" label. +$left_frame->Label( + -text => "Output mode:", + -background => "$color{label}", +)->pack( + -side => 'top', + -fill => 'x', +); + +# Create mode radiobuttons in the left frame. +create_radiobutton($left_frame, "super-quiet", \$config{output_mode}); +create_radiobutton($left_frame, "quiet", \$config{output_mode}); +create_radiobutton($left_frame, "normal", \$config{output_mode}); +create_radiobutton($left_frame, "verbose", \$config{output_mode}); + +# Create "Diff mode" label. +$left_frame->Label( + -text => "Diff mode:", + -background => "$color{label}", +)->pack( + -side => 'top', + -fill => 'x', +); + +create_radiobutton($left_frame, "detailed", \$config{diff_mode}); +create_radiobutton($left_frame, "summarized", \$config{diff_mode}); +create_radiobutton($left_frame, "remove common", \$config{diff_mode}); + + +# Create "activity messages" label. +$main->Label( + -text => "Output messages:", + -width => '130', + -background => "$color{label}", +)->pack( + -side => 'top', + -fill => 'x', +); + + + +# Pack output frame. +$out_frame->pack( + -expand => 'yes', + -fill => 'both', +); + + +# Pack help label below output window. +$help_label->pack( + -fill => 'x', +); + + +# Create "actions" label. +$left_frame->Label( + -text => "Actions:", + -background => "$color{label}", +)->pack( + -side => 'top', + -fill => 'x', +); + + +# Create action buttons. + +$balloon->attach( + create_actionbutton($left_frame, "Update rules!", \&update_rules), + -statusmsg => $help{update} +); + +$balloon->attach( + create_actionbutton($left_frame, "Clear output messages", \&clear_messages), + -statusmsg => $help{clear} +); + +$balloon->attach( + create_actionbutton($left_frame, "Save output messages", \&save_messages), + -statusmsg => $help{save} +); + +$balloon->attach( + create_actionbutton($left_frame, "Exit", \&exit), + -statusmsg => $help{exit} +); + + + +# Make the mousewheel scroll the output window. Taken from Mastering Perl/Tk. +if ($^O eq 'MSWin32') { + $out_frame->bind('<MouseWheel>' => + [ sub { $_[0]->yview('scroll', -($_[1] / 120) * 3, 'units')}, + Ev('D') ] + ); +} else { + $out_frame->bind('<4>' => sub { + $_[0]->yview('scroll', -3, 'units') unless $Tk::strictMotif; + }); + + $out_frame->bind('<5>' => sub { + $_[0]->yview('scroll', +3, 'units') unless $Tk::strictMotif; + }); +} + + + +# Now the fun begins. +if ($config{animate}) { + foreach (split(//, "Welcome to $version")) { + logmsg("$_", 'MISC'); + $out_frame->after(5); + } +} else { + logmsg("Welcome to $version", 'MISC'); +} + +logmsg("\n\n", 'MISC'); + +# Load gui settings into %config. +load_config(); + + +# Warn if any required file/directory is not set. +logmsg("No oinkmaster.pl set, please select one above!\n\n", 'ERROR') + if ($config{oinkmaster} !~ /\S/); + +logmsg("No oinkmaster configuration file set, please select one above!\n\n", 'ERROR') + if ($config{oinkmaster_conf} !~ /\S/); + +logmsg("Output directory is not set, please select one above!\n\n", 'ERROR') + if ($config{outdir} !~ /\S/); + + +MainLoop; + + + +#### END #### + + + +sub fileDialog($ $ $ $) +{ + my $var_ref = shift; + my $title = shift; + my $type = shift; + my $filetypes = shift; + my $dirname; + + if ($type eq 'WRDIR') { + if ($use_fileop) { + $dirname = Win32::FileOp::BrowseForFolder("title", CSIDL_DRIVES); + } else { + my $fs = $main->FileSelect(); + $fs->configure(-verify => ['-d', '-w'], -title => $title); + $dirname = $fs->Show; + } + $$var_ref = $dirname if ($dirname); + } elsif ($type eq 'EXECFILE' || $type eq 'ROFILE' || $type eq 'WRFILE' || $type eq 'URL') { + my $filename = $main->getOpenFile(-title => $title, -filetypes => $filetypes); + $$var_ref = $filename if ($filename); + } elsif ($type eq 'SAVEFILE') { + my $filename = $main->getSaveFile(-title => $title, -filetypes => $filetypes); + $$var_ref = $filename if ($filename); + } else { + logmsg("Unknown type ($type)\n", 'ERROR'); + } +} + + + +sub update_file_label_color($ $ $) +{ + my $label = shift; + my $filename = shift; + my $type = shift; + + $filename =~ s/^\s+//; + $filename =~ s/\s+$//; + + unless ($filename) { + $label->configure(-background => $color{file_label_not_ok}); + return (1); + } + + if ($type eq "URL") { + if ($filename =~ /^(?:http|ftp|scp):\/\/.+\.tar\.gz$/) { + $label->configure(-background => $color{file_label_ok}); + } elsif ($filename =~ /^(?:file:\/\/)*(.+\.tar\.gz)$/) { + my $file = $1; + if (-f "$file" && -r "$file") { + $label->configure(-background => $color{file_label_ok}); + } else { + $label->configure(-background => $color{file_label_not_ok}); + } + } else { + $label->configure(-background => $color{file_label_not_ok}); + } + } elsif ($type eq "ROFILE") { + if (-f "$filename" && -r "$filename") { + $label->configure(-background => $color{file_label_ok}); + } else { + $label->configure(-background => $color{file_label_not_ok}); + } + } elsif ($type eq "EXECFILE") { + if (-f "$filename" && (-x "$filename" || $^O eq 'MSWin32')) { + $label->configure(-background => $color{file_label_ok}); + } else { + $label->configure(-background => $color{file_label_not_ok}); + } + } elsif ($type eq "WRFILE") { + if (-f "$filename" && -w "$filename") { + $label->configure(-background => $color{file_label_ok}); + } else { + $label->configure(-background => $color{file_label_not_ok}); + } + } elsif ($type eq "WRDIR") { + if (-d "$filename" && -w "$filename") { + $label->configure(-background => $color{file_label_ok}); + } else { + $label->configure(-background => $color{file_label_not_ok}); + } + } else { + print STDERR "incorrect type ($type)\n"; + exit; + } + + return (1); +} + + + +sub create_checkbutton($ $ $) +{ + my $frame = shift; + my $name = shift; + my $var_ref = shift; + + my $button = $frame->Checkbutton( + -text => $name, + -background => $color{button}, + -activebackground => $color{button_active}, + -highlightbackground => $color{button_bg}, + -variable => $var_ref, + -relief => 'raise', + -anchor => 'w', + )->pack( + -fill => 'x', + -side => 'top', + -pady => '1', + ); + + return ($button); +} + + + +sub create_actionbutton($ $ $) +{ + my $frame = shift; + my $name = shift; + my $func_ref = shift; + + my $button = $frame->Button( + -text => $name, + -command => sub { + &$func_ref; + $out_frame->focus; + }, + -background => $color{button}, + -activebackground => $color{button_active}, + -highlightbackground => $color{button_bg}, + )->pack( + -fill => 'x', + ); + + return ($button); +} + + + +sub create_radiobutton($ $ $) +{ + my $frame = shift; + my $name = shift; + my $mode_ref = shift; + + my $button = $frame->Radiobutton( + -text => $name, + -highlightbackground => $color{button_bg}, + -background => $color{button}, + -activebackground => $color{button_active}, + -variable => $mode_ref, + -relief => 'raised', + -anchor => 'w', + -value => $name, + )->pack( + -side => 'top', + -pady => '1', + -fill => 'x', + ); + + return ($button); +} + + + +# Create <label><entry><browsebutton> in given frame. +sub create_fileSelectFrame($ $ $ $ $ $) +{ + my $win = shift; + my $name = shift; + my $type = shift; # FILE|DIR|URL + my $var_ref = shift; + my $edtype = shift; # EDIT|NOEDIT + my $filetypes = shift; + + # Create frame. + my $frame = $win->Frame( + -bg => $color{background}, + )->pack( + -padx => '2', + -pady => '2', + -fill => 'x' + ); + + # Create label. + my $label = $frame->Label( + -text => $name, + -width => '16', + -relief => 'raised', + -background => "$color{file_label_not_ok}", + )->pack( + -side => 'left' + ); + + my $entry; + + if ($type eq 'URL') { + $entry = $frame->BrowseEntry( + -textvariable => $var_ref, + -background => $color{entry_bg}, + -width => '80', + -choices => \@urls, + -validate => 'key', + -validatecommand => sub { update_file_label_color($label, $_[0], $type) }, + )->pack( + -side => 'left', + -expand => 'yes', + -fill => 'x' + ); + } else { + $entry = $frame->Entry( + -textvariable => $var_ref, + -background => $color{entry_bg}, + -width => '80', + -validate => 'key', + -validatecommand => sub { update_file_label_color($label, $_[0], $type) }, + )->pack( + -side => 'left', + -expand => 'yes', + -fill => 'x' + ); + } + + # Create edit-button if file is ediable. + if ($edtype eq 'EDIT') { + my $edit_but = $frame->Button( + -text => "Edit", + -background => "$color{button}", + -command => sub { + unless (-e "$$var_ref") { + logmsg("Select an existing file first!\n\n", 'ERROR'); + return; + } + + if ($config{editor}) { + $main->Busy(-recurse => 1); + logmsg("Launching " . $config{editor} . + ", close it to continue the GUI.\n\n", 'MISC'); + sleep(2); + system($config{editor}, $$var_ref); # MainLoop will be put on hold... + $main->Unbusy; + } else { + logmsg("No editor set\n\n", 'ERROR'); + } + } + )->pack( + -side => 'left', + ); + } + + # Create browse-button. + my $but = $frame->Button( + -text => "browse ...", + -background => $color{button}, + -command => sub { + fileDialog($var_ref, $name, $type, $filetypes); + } + )->pack( + -side => 'left', + ); + + return ($frame); +} + + + +sub logmsg($ $) +{ + my $text = shift; + my $type = shift; + + return unless (defined($text)); + + $out_frame->tag(qw(configure OUTPUT -foreground grey)); + $out_frame->tag(qw(configure ERROR -foreground red)); + $out_frame->tag(qw(configure MISC -foreground white)); + $out_frame->tag(qw(configure EXEC -foreground bisque2)); + + $out_frame->insert('end', "$text", "$type"); + $out_frame->see('end'); + $out_frame->update; +} + + + + +sub execute_oinkmaster(@) +{ + my @cmd = @_; + my @obfuscated_cmd; + + # Obfuscate possible password in url. + foreach my $line (@cmd) { + if ($line =~ /^(\S+:\/\/.+?):.+?@(.+)/) { + push(@obfuscated_cmd, "$1:*password*\@$2"); + } else { + push(@obfuscated_cmd, $line); + } + } + + logmsg("@obfuscated_cmd:\n", 'EXEC'); + + $main->Busy(-recurse => 1); + + if ($^O eq 'MSWin32') { + open(OINK, "@cmd 2>&1|"); + while (<OINK>) { + logmsg($_, 'OUTPUT'); + } + close(OINK); + } else { + if (open(OINK,"-|")) { + while (<OINK>) { + logmsg($_, 'OUTPUT'); + } + } else { + open(STDERR, '>&STDOUT'); + exec(@cmd); + } + close(OINK); + } + + $main->Unbusy; + logmsg("done.\n\n", 'EXEC'); +} + + + +sub clear_messages() +{ + $out_frame->delete('1.0','end'); + $out_frame->update; +} + + + +sub save_messages() +{ + my $text = $out_frame->get('1.0', 'end'); + my $title = 'Save output messages'; + my $filename; + + my $filetypes = [ + ['Log files', ['.log', '.txt']], + ['All files', '*' ] + ]; + + + if (length($text) > 1) { + fileDialog(\$filename, $title, 'SAVEFILE', $filetypes); + if (defined($filename)) { + + unless (open(LOG, ">", "$filename")) { + logmsg("Could not open $filename for writing: $!\n\n", 'ERROR'); + return; + } + + print LOG $text; + close(LOG); + logmsg("Successfully saved output messages to $filename\n\n", 'MISC'); + } + + } else { + logmsg("Nothing to save.\n\n", 'ERROR'); + } +} + + + +sub update_rules() +{ + my @cmd; + + create_cmdline(\@cmd) || return; + clear_messages(); + execute_oinkmaster(@cmd); +} + + + +sub create_cmdline($) +{ + my $cmd_ref = shift; + + my $oinkmaster = $config{oinkmaster}; + my $oinkmaster_conf = $config{oinkmaster_conf}; + my $outdir = $config{outdir}; + my $varfile = $config{varfile}; + my $url = $config{url}; + my $backupdir = $config{backupdir}; + + # Assume file:// if url prefix is missing. + if ($url) { + $url = "file://$url" unless ($url =~ /(?:http|ftp|file|scp):\/\//); + if ($url =~ /.+<oinkcode>.+/) { + logmsg("You must replace <oinkcode> with your real oinkcode, see the FAQ!\n\n", 'ERROR'); + return (0); + } + } + + $oinkmaster = File::Spec->rel2abs($oinkmaster) + if ($oinkmaster); + + $outdir = File::Spec->canonpath("$outdir"); + $backupdir = File::Spec->canonpath("$backupdir"); + + # Clean leading/trailing whitespaces. + foreach my $var_ref (\$oinkmaster, \$oinkmaster_conf, \$outdir, + \$varfile, \$url, \$backupdir) { + $$var_ref =~ s/^\s+//; + $$var_ref =~ s/\s+$//; + } + + unless ($config{oinkmaster} && -f "$config{oinkmaster}" && + (-x "$config{oinkmaster}" || $^O eq 'MSWin32')) { + logmsg("Location of oinkmaster.pl is not set correctly!\n\n", 'ERROR'); + return; + } + + unless ($oinkmaster_conf && -f "$oinkmaster_conf") { + logmsg("Location of configuration file is not set correctlyy!\n\n", 'ERROR'); + return (0); + } + + unless ($outdir && -d "$outdir") { + logmsg("Output directory is not set correctly!\n\n", 'ERROR'); + return (0); + } + + # Add leading/trailing "" if win32. + foreach my $var_ref (\$oinkmaster, \$oinkmaster_conf, \$outdir, + \$varfile, \$url, \$backupdir) { + if ($^O eq 'MSWin32' && $$var_ref) { + $$var_ref = "\"$$var_ref\""; + } + } + + push(@$cmd_ref, + "$config{perl}", "$oinkmaster", + "-C", "$oinkmaster_conf", + "-o", "$outdir"); + + push(@$cmd_ref, "-c") if ($config{careful}); + push(@$cmd_ref, "-e") if ($config{enable_all}); + push(@$cmd_ref, "-r") if ($config{check_removed}); + push(@$cmd_ref, "-q") if ($config{output_mode} eq "quiet"); + push(@$cmd_ref, "-Q") if ($config{output_mode} eq "super-quiet"); + push(@$cmd_ref, "-v") if ($config{output_mode} eq "verbose"); + push(@$cmd_ref, "-m") if ($config{diff_mode} eq "remove common"); + push(@$cmd_ref, "-s") if ($config{diff_mode} eq "summarized"); + push(@$cmd_ref, "-U", "$varfile") if ($varfile); + push(@$cmd_ref, "-b", "$backupdir") if ($backupdir); + + push(@$cmd_ref, "-u", "$url") + if ($url); + + return (1); +} + + + +# Load $config file into %config hash. +sub load_config() +{ + unless (defined($gui_config_file) && $gui_config_file) { + logmsg("Unable to determine config file location, is your \$HOME set?\n\n", 'ERROR'); + return; + } + + unless (-e "$gui_config_file") { + logmsg("$gui_config_file does not exist, keeping current/default settings\n\n", 'MISC'); + return; + } + + unless (open(RC, "<", "$gui_config_file")) { + logmsg("Could not open $gui_config_file for reading: $!\n\n", 'ERROR'); + return; + } + + while (<RC>) { + next unless (/^(\S+)=(.*)/); + $config{$1} = $2; + } + + close(RC); + logmsg("Successfully loaded GUI settings from $gui_config_file\n\n", 'MISC'); +} + + + +# Save %config into file $config. +sub save_config() +{ + unless (defined($gui_config_file) && $gui_config_file) { + logmsg("Unable to determine config file location, is your \$HOME set?\n\n", 'ERROR'); + return; + } + + unless (open(RC, ">", "$gui_config_file")) { + logmsg("Could not open $gui_config_file for writing: $!\n\n", 'ERROR'); + return; + } + + print RC "# Automatically created by Oinkgui. ". + "Do not edit directly unless you have to.\n"; + + foreach my $option (sort(keys(%config))) { + print RC "$option=$config{$option}\n"; + } + + close(RC); + logmsg("Successfully saved current GUI settings to $gui_config_file\n\n", 'MISC'); +} diff --git a/config/snort-old/bin/oinkmaster_contrib/oinkmaster.pl b/config/snort-old/bin/oinkmaster_contrib/oinkmaster.pl new file mode 100644 index 00000000..f9c4d215 --- /dev/null +++ b/config/snort-old/bin/oinkmaster_contrib/oinkmaster.pl @@ -0,0 +1,2754 @@ +#!/usr/bin/perl -w + +# $Id: oinkmaster.pl,v 1.406 2006/02/10 13:02:44 andreas_o Exp $ # + +# Copyright (c) 2001-2006 Andreas Östling <andreaso@it.su.se> +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or +# without modification, are permitted provided that the following +# conditions are met: +# +# 1. Redistributions of source code must retain the above +# copyright notice, this list of conditions and the following +# disclaimer. +# +# 2. Redistributions in binary form must reproduce the above +# copyright notice, this list of conditions and the following +# disclaimer in the documentation and/or other materials +# provided with the distribution. +# +# 3. Neither the name of the author nor the names of its +# contributors may be used to endorse or promote products +# derived from this software without specific prior written +# permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +use 5.006001; + +use strict; +use File::Basename; +use File::Copy; +use File::Path; +use File::Spec; +use Getopt::Long; +use File::Temp qw(tempdir); + +sub show_usage(); +sub parse_cmdline($); +sub read_config($ $); +sub sanity_check(); +sub download_file($ $); +sub unpack_rules_archive($ $ $); +sub join_tmp_rules_dirs($ $ @); +sub process_rules($ $ $ $ $ $); +sub process_rule($ $ $ $ $ $ $ $); +sub setup_rules_hash($ $); +sub get_first_only($ $ $); +sub print_changes($ $); +sub print_changetype($ $ $ $); +sub print_summary_change($ $); +sub make_backup($ $); +sub get_changes($ $ $); +sub update_rules($ @); +sub copy_rules($ $); +sub is_in_path($); +sub get_next_entry($ $ $ $ $ $); +sub get_new_vars($ $ $ $); +sub add_new_vars($ $); +sub write_new_vars($ $); +sub msdos_to_cygwin_path($); +sub parse_mod_expr($ $ $ $); +sub untaint_path($); +sub approve_changes(); +sub parse_singleline_rule($ $ $); +sub join_multilines($); +sub minimize_diff($ $); +sub catch_sigint(); +sub clean_exit($); + + +my $VERSION = 'Oinkmaster v2.0, Copyright (C) 2001-2006 '. + 'Andreas Östling <andreaso@it.su.se>'; +my $OUTFILE = 'snortrules.tar.gz'; +my $RULES_DIR = 'rules'; + +my $PRINT_NEW = 1; +my $PRINT_OLD = 2; +my $PRINT_BOTH = 3; + +my %config = ( + careful => 0, + check_removed => 0, + config_test_mode => 0, + enable_all => 0, + interactive => 0, + make_backup => 0, + minimize_diff => 0, + min_files => 1, + min_rules => 1, + quiet => 0, + summary_output => 0, + super_quiet => 0, + update_vars => 0, + use_external_bins => 1, + verbose => 0, + use_path_checks => 1, + rule_actions => "alert|drop|log|pass|reject|sdrop|activate|dynamic", + tmp_basedir => $ENV{TMP} || $ENV{TMPDIR} || $ENV{TEMPDIR} || '/tmp', +); + + +# Regexp to match the start of a multi-line rule. +# %ACTIONS% will be replaced with content of $config{actions} later. +# sid and msg will then be looked for in parse_singleline_rule(). +my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.*\\\\\s*\n$'; # '; + +# Regexp to match a single-line rule. +# sid and msg will then be looked for in parse_singleline_rule(). +my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. + '\s.+;\s*\)\s*$'; # '; + +# Match var line where var name goes into $1. +my $VAR_REGEXP = '^\s*var\s+(\S+)\s+(\S+)'; + +# Allowed characters in misc paths/filenames, including the ones in the tarball. +my $OK_PATH_CHARS = 'a-zA-Z\d\ _\(\)\[\]\.\-+:\\\/~@,='; + +# Default locations for configuration file. +my @DEFAULT_CONFIG_FILES = qw( + /etc/oinkmaster.conf + /usr/local/etc/oinkmaster.conf +); + +my @DEFAULT_DIST_VAR_FILES = qw( + snort.conf +); + +my (%loaded, $tmpdir); + + + +#### MAIN #### + +# No buffering. +select(STDERR); +$| = 1; +select(STDOUT); +$| = 1; + + +my $start_date = scalar(localtime); + +# Assume the required Perl modules are available if we're on Windows. +$config{use_external_bins} = 0 if ($^O eq "MSWin32"); + +# Parse command line arguments and add at least %config{output_dir}. +parse_cmdline(\%config); + +# If no config was specified on command line, look for one in default locations. +if ($#{$config{config_files}} == -1) { + foreach my $config (@DEFAULT_CONFIG_FILES) { + if (-e "$config") { + push(@{${config{config_files}}}, $config); + last; + } + } +} + +# If no dist var file was specified on command line, set to default file(s). +if ($#{$config{dist_var_files}} == -1) { + foreach my $var_file (@DEFAULT_DIST_VAR_FILES) { + push(@{${config{dist_var_files}}}, $var_file); + } +} + +# If config is still not defined, we can't continue. +if ($#{$config{config_files}} == -1) { + clean_exit("configuration file not found in default locations\n". + "(@DEFAULT_CONFIG_FILES)\n". + "Put it there or use the \"-C <file>\" argument."); +} + +read_config($_, \%config) for @{$config{config_files}}; + +# Now substitute "%ACTIONS%" with $config{rule_actions}, which may have +# been modified after reading the config file. +$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; +$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; + +# If we're told not to use external binaries, load the Perl modules now. +unless ($config{use_external_bins}) { + print STDERR "Loading Perl modules.\n" if ($config{verbose}); + + eval { + require IO::Zlib; + require Archive::Tar; + require LWP::UserAgent; + }; + + clean_exit("failed to load required Perl modules:\n\n$@\n". + "Install them or set use_external_bins to 1 ". + "if you want to use external binaries instead.") + if ($@); +} + + +# Do some basic sanity checking and exit if something fails. +# A new PATH will be set. +sanity_check(); + +$SIG{INT} = \&catch_sigint; + +# Create temporary dir. +$tmpdir = tempdir("oinkmaster.XXXXXXXXXX", DIR => File::Spec->rel2abs($config{tmp_basedir})) + or clean_exit("could not create temporary directory in $config{tmp_basedir}: $!"); + +# If we're in config test mode and have come this far, we're done. +if ($config{config_test_mode}) { + print "No fatal errors in configuration.\n"; + clean_exit(""); +} + +umask($config{umask}) if exists($config{umask}); + +# Download and unpack all the rules archives into separate tmp dirs. +my @url_tmpdirs; +foreach my $url (@{$config{url}}) { + my $url_tmpdir = tempdir("url.XXXXXXXXXX", DIR => $tmpdir) + or clean_exit("could not create temporary directory in $tmpdir: $!"); + push(@url_tmpdirs, "$url_tmpdir/$RULES_DIR"); + if ($url =~ /^dir:\/\/(.+)/) { + mkdir("$url_tmpdir/$RULES_DIR") + or clean_exit("Could not create $url_tmpdir/$RULES_DIR"); + copy_rules($1, "$url_tmpdir/$RULES_DIR"); + } else { + download_file($url, "$url_tmpdir/$OUTFILE"); + unpack_rules_archive("$url", "$url_tmpdir/$OUTFILE", $RULES_DIR); + } +} + +# Copy all rules files from the tmp dirs into $RULES_DIR in the tmp directory. +# File matching 'skipfile' a directive will not be copied. +# Filenames (with full path) will be stored as %new_files{filename}. +# Will exit in case of duplicate filenames. +my $num_files = join_tmp_rules_dirs("$tmpdir/$RULES_DIR", \my %new_files, @url_tmpdirs); + +# Make sure we have at least the minimum number of files. +clean_exit("not enough rules files in downloaded rules archive(s).\n". + "Number of rules files is $num_files but minimum is set to $config{min_files}.") + if ($num_files < $config{min_files}); + +# This is to read in possible 'localsid' rules. +my %rh_tmp = setup_rules_hash(\%new_files, $config{output_dir}); + +# Disable/modify/clean downloaded rules. +my $num_rules = process_rules(\@{$config{sid_modify_list}}, + \%{$config{sid_disable_list}}, + \%{$config{sid_enable_list}}, + \%{$config{sid_local_list}}, + \%rh_tmp, + \%new_files); + +# Make sure we have at least the minimum number of rules. +clean_exit("not enough rules in downloaded archive(s).\n". + "Number of rules is $num_rules but minimum is set to $config{min_rules}.") + if ($num_rules < $config{min_rules}); + +# Setup a hash containing the content of all processed rules files. +my %rh = setup_rules_hash(\%new_files, $config{output_dir}); + +# Compare the new rules to the old ones. +my %changes = get_changes(\%rh, \%new_files, $RULES_DIR); + +# Check for variables that exist in dist snort.conf(s) but not in local snort.conf. +get_new_vars(\%changes, \@{$config{dist_var_files}}, $config{varfile}, \@url_tmpdirs) + if ($config{update_vars}); + + +# Find out if something had changed. +my $something_changed = 0; + +$something_changed = 1 + if (keys(%{$changes{modified_files}}) || + keys(%{$changes{added_files}}) || + keys(%{$changes{removed_files}}) || + $#{$changes{new_vars}} > -1); + + +# Update files listed in %changes{modified_files} (copy the new files +# from the temporary directory into our output directory) and add new +# variables to the local snort.conf if requested, unless we're running in +# careful mode. Create backup first if running with -b. +my $printed = 0; +if ($something_changed) { + if ($config{careful}) { + print STDERR "Skipping backup since we are running in careful mode.\n" + if ($config{make_backup} && (!$config{quiet})); + } else { + if ($config{interactive}) { + print_changes(\%changes, \%rh); + $printed = 1; + } + + if (!$config{interactive} || ($config{interactive} && approve_changes)) { + make_backup($config{output_dir}, $config{backup_dir}) + if ($config{make_backup}); + + add_new_vars(\%changes, $config{varfile}) + if ($config{update_vars}); + + update_rules($config{output_dir}, keys(%{$changes{modified_files}})); + } + } +} else { + print STDERR "No files modified - no need to backup old files, skipping.\n" + if ($config{make_backup} && !$config{quiet}); +} + +print "\nOinkmaster is running in careful mode - not updating anything.\n" + if ($something_changed && $config{careful}); + +print_changes(\%changes, \%rh) + if (!$printed && ($something_changed || !$config{quiet})); + + +# Everything worked. Do a clean exit without any error message. +clean_exit(""); + + +# END OF MAIN # + + + +# Show usage information and exit. +sub show_usage() +{ + my $progname = basename($0); + + print STDERR << "RTFM"; + +$VERSION + +Usage: $progname -o <outdir> [options] + +<outdir> is where to put the new files. +This should be the directory where you store your Snort rules. + +Options: +-b <dir> Backup your old rules into <dir> before overwriting them +-c Careful mode (dry run) - check for changes but do not update anything +-C <file> Use this configuration file instead of the default + May be specified multiple times to load multiple files +-e Enable all rules that are disabled by default +-h Show this usage information +-i Interactive mode - you will be asked to approve the changes (if any) +-m Minimize diff when printing result by removing common parts in rules +-q Quiet mode - no output unless changes were found +-Q Super-quiet mode - like -q but even more quiet +-r Check for rules files that exist in the output directory + but not in the downloaded rules archive +-s Leave out details in rules results, just print SID, msg and filename +-S <file> Look for new variables in this file in the downloaded archive instead + of the default (@DEFAULT_DIST_VAR_FILES). Used in conjunction with -U. + May be specified multiple times to search multiple files. +-T Config test - just check configuration file(s) for errors/warnings +-u <url> Download from this URL instead of URL(s) in the configuration file + (http|https|ftp|file|scp:// ... .tar.gz|.gz, or dir://<dir>) + May be specified multiple times to grab multiple rules archives +-U <file> Merge new variables from downloaded snort.conf(s) into <file> +-v Verbose mode (debug) +-V Show version and exit + +RTFM + exit; +} + + + +# Parse the command line arguments and exit if we don't like them. +sub parse_cmdline($) +{ + my $cfg_ref = shift; + + Getopt::Long::Configure("bundling"); + + my $cmdline_ok = GetOptions( + "b=s" => \$$cfg_ref{backup_dir}, + "c" => \$$cfg_ref{careful}, + "C=s" => \@{$$cfg_ref{config_files}}, + "e" => \$$cfg_ref{enable_all}, + "h" => \&show_usage, + "i" => \$$cfg_ref{interactive}, + "m" => \$$cfg_ref{minimize_diff}, + "o=s" => \$$cfg_ref{output_dir}, + "q" => \$$cfg_ref{quiet}, + "Q" => \$$cfg_ref{super_quiet}, + "r" => \$$cfg_ref{check_removed}, + "s" => \$$cfg_ref{summary_output}, + "S=s" => \@{$$cfg_ref{dist_var_files}}, + "T" => \$$cfg_ref{config_test_mode}, + "u=s" => \@{$$cfg_ref{url}}, + "U=s" => \$$cfg_ref{varfile}, + "v" => \$$cfg_ref{verbose}, + "V" => sub { + print "$VERSION\n"; + exit(0); + } + ); + + + show_usage unless ($cmdline_ok && $#ARGV == -1); + + $$cfg_ref{quiet} = 1 if ($$cfg_ref{super_quiet}); + $$cfg_ref{update_vars} = 1 if ($$cfg_ref{varfile}); + + if ($$cfg_ref{backup_dir}) { + $$cfg_ref{backup_dir} = File::Spec->canonpath($$cfg_ref{backup_dir}); + $$cfg_ref{make_backup} = 1; + } + + # Cannot specify dist var files without specifying var target file. + if (@{$$cfg_ref{dist_var_files}} && !$$cfg_ref{update_vars}) { + clean_exit("You can not specify distribution variable file(s) without ". + "also specifying local file to merge into"); + } + + # -o <dir> is the only required option in normal usage. + if ($$cfg_ref{output_dir}) { + $$cfg_ref{output_dir} = File::Spec->canonpath($$cfg_ref{output_dir}); + } else { + warn("Error: no output directory specified.\n"); + show_usage(); + } + + # Mark that url was set on command line (so we don't override it later). + $$cfg_ref{cmdline_url} = 1 if ($#{$config{url}} > -1); +} + + + +# Read in stuff from the configuration file. +sub read_config($ $) +{ + my $config_file = shift; + my $cfg_ref = shift; + my $linenum = 0; + my $multi; + my %templates; + + $config_file = File::Spec->canonpath(File::Spec->rel2abs($config_file)); + + clean_exit("configuration file \"$config_file\" does not exist.\n") + unless (-e "$config_file"); + + clean_exit("\"$config_file\" is not a file.\n") + unless (-f "$config_file"); + + print STDERR "Loading $config_file\n" + unless ($config{quiet}); + + # Avoid loading the same file multiple times to avoid infinite recursion etc. + if ($^O eq "MSWin32") { + clean_exit("attempt to load \"$config_file\" twice.") + if ($loaded{$config_file}++); + } else { + my ($dev, $ino) = (stat($config_file))[0,1] + or clean_exit("unable to stat $config_file: $!"); + clean_exit("attempt to load \"$config_file\" twice.") + if ($loaded{$dev, $ino}++); + } + + open(CONF, "<", "$config_file") + or clean_exit("could not open configuration file \"$config_file\": $!"); + my @conf = <CONF>; + close(CONF); + + LINE:while ($_ = shift(@conf)) { + $linenum++; + + unless ($multi) { + s/^\s*//; + s/^#.*//; + } + + # Multi-line start/continuation. + if (/\\\s*\n$/) { + s/\\\s*\n$//; + s/^\s*#.*//; + + # Be strict about removing #comments in modifysid/define_template statements, as + # they may contain other '#' chars. + if (defined($multi) && ($multi =~ /^modifysid/i || $multi =~ /^define_template/i)) { + s/#.*// if (/^\s*\d+[,\s\d]+#/); + } else { + s/\s*\#.*// unless (/^modifysid/i || /^define_template/i); + } + + $multi .= $_; + next LINE; + } + + # Last line of multi-line directive. + if (defined($multi)) { + $multi .= $_; + $_ = $multi; + undef($multi); + } + + # Remove traling whitespaces (*after* a possible multi-line is rebuilt). + s/\s*$//; + + # Remove comments unless it's a modifysid/define_template line + # (the "#" may be part of the modifysid expression). + s/\s*\#.*// unless (/^modifysid/i || /^define_template/i); + + # Skip blank lines. + next unless (/\S/); + + # Use a template and make $_ a "modifysid" line. + if (/^use_template\s+(\S+)\s+(\S+[^"]*)\s*(".*")*(?:#.*)*/i) { + my ($template_name, $sid, $args) = ($1, $2, $3); + + if (exists($templates{$template_name})) { + my $template = $templates{$template_name}; # so we don't substitute %ARGx% globally + + # Evaluate each "%ARGx%" in the template to the corresponding value. + if (defined($args)) { + my @args = split(/"\s+"/, $args); + foreach my $i (1 .. @args) { + $args[$i - 1] =~ s/^"//; + $args[$i - 1] =~ s/"$//; + $template =~ s/%ARG$i%/$args[$i - 1]/g; + } + } + + # There should be no %ARGx% stuff left now. + if ($template =~ /%ARG\d%/) { + warn("WARNING: too few arguments for template \"$template_name\"\n"); + $_ = "error"; # so it will be reported as an invalid line later + } + + unless ($_ eq "error") { + $_ = "modifysid $sid $template\n"; + print STDERR "Template \"$template_name\" expanded to: $_" + if ($config{verbose}); + } + + } else { + warn("WARNING: template \"$template_name\" has not been defined\n"); + } + } + + # new template definition. + if (/^define_template\s+(\S+)\s+(".+"\s+\|\s+".*")\s*(?:#.*)*$/i) { + my ($template_name, $template) = ($1, $2); + + if (exists($templates{$template_name})) { + warn("WARNING: line $linenum in $config_file: ". + "template \"$template_name\" already defined, keeping old\n"); + } else { + $templates{$template_name} = $template; + } + + # modifysid <SIDORFILE[,SIDORFILE, ...]> "substthis" | "withthis" + } elsif (/^modifysids*\s+(\S+.*)\s+"(.+)"\s+\|\s+"(.*)"\s*(?:#.*)*$/i) { + my ($sid_list, $subst, $repl) = ($1, $2, $3); + warn("WARNING: line $linenum in $config_file is invalid, ignoring\n") + unless(parse_mod_expr(\@{$$cfg_ref{sid_modify_list}}, + $sid_list, $subst, $repl)); + + # disablesid <SID[,SID, ...]> + } elsif (/^disablesids*\s+(\d.*)/i) { + my $sid_list = $1; + foreach my $sid (split(/\s*,\s*/, $sid_list)) { + if ($sid =~ /^\d+$/) { + $$cfg_ref{sid_disable_list}{$sid}++; + } else { + warn("WARNING: line $linenum in $config_file: ". + "\"$sid\" is not a valid SID, ignoring\n"); + } + } + + # localsid <SID[,SID, ...]> + } elsif (/^localsids*\s+(\d.*)/i) { + my $sid_list = $1; + foreach my $sid (split(/\s*,\s*/, $sid_list)) { + if ($sid =~ /^\d+$/) { + $$cfg_ref{sid_local_list}{$sid}++; + } else { + warn("WARNING: line $linenum in $config_file: ". + "\"$sid\" is not a valid SID, ignoring\n"); + } + } + + # enablesid <SID[,SID, ...]> + } elsif (/^enablesids*\s+(\d.*)/i) { + my $sid_list = $1; + foreach my $sid (split(/\s*,\s*/, $sid_list)) { + if ($sid =~ /^\d+$/) { + $$cfg_ref{sid_enable_list}{$sid}++; + } else { + warn("WARNING: line $linenum in $config_file: ". + "\"$sid\" is not a valid SID, ignoring\n"); + } + } + + # skipfile <file[,file, ...]> + } elsif (/^skipfiles*\s+(.*)/i) { + my $args = $1; + foreach my $file (split(/\s*,\s*/, $args)) { + if ($file =~ /^\S+$/) { + $config{verbose} && print STDERR "Adding file to ignore list: $file.\n"; + $$cfg_ref{file_ignore_list}{$file}++; + } else { + warn("WARNING: line $linenum in $config_file is invalid, ignoring\n"); + } + } + + } elsif (/^url\s*=\s*(.*)/i) { + push(@{$$cfg_ref{url}}, $1) + unless ($$cfg_ref{cmdline_url}); + + } elsif (/^path\s*=\s*(.+)/i) { + $$cfg_ref{path} = $1; + + } elsif (/^update_files\s*=\s*(.+)/i) { + $$cfg_ref{update_files} = $1; + + } elsif (/^rule_actions\s*=\s*(.+)/i) { + $$cfg_ref{rule_actions} = $1; + + } elsif (/^umask\s*=\s*([0-7]{4})$/i) { + $$cfg_ref{umask} = oct($1); + + } elsif (/^min_files\s*=\s*(\d+)/i) { + $$cfg_ref{min_files} = $1; + + } elsif (/^min_rules\s*=\s*(\d+)/i) { + $$cfg_ref{min_rules} = $1; + + } elsif (/^tmpdir\s*=\s*(.+)/i) { + $$cfg_ref{tmp_basedir} = $1; + + } elsif (/^use_external_bins\s*=\s*([01])/i) { + $$cfg_ref{use_external_bins} = $1; + + } elsif (/^scp_key\s*=\s*(.+)/i) { + $$cfg_ref{scp_key} = $1; + + } elsif (/^use_path_checks\s*=\s*([01])/i) { + $$cfg_ref{use_path_checks} = $1; + + } elsif (/^user_agent\s*=\s*(.+)/i) { + $$cfg_ref{user_agent} = $1; + + } elsif (/^include\s+(\S+.*)/i) { + my $include = $1; + read_config($include, $cfg_ref); + } else { + warn("WARNING: line $linenum in $config_file is invalid, ignoring\n"); + } + } +} + + + +# Make a few basic tests to make sure things look ok. +# Will also set a new PATH as defined in the config file. +sub sanity_check() +{ + my @req_params = qw(path update_files); # required parameters in conf + my @req_binaries = qw(gzip tar); # required binaries (unless we use modules) + + # Can't use both quiet mode and verbose mode. + clean_exit("quiet mode and verbose mode at the same time doesn't make sense.") + if ($config{quiet} && $config{verbose}); + + # Can't use multiple output modes. + clean_exit("can't use multiple output modes at the same time.") + if ($config{minimize_diff} && $config{summary_output}); + + # Make sure all required variables are defined in the config file. + foreach my $param (@req_params) { + clean_exit("the required parameter \"$param\" is not defined in the configuration file.") + unless (exists($config{$param})); + } + + # We now know a path was defined in the config, so set it. + # If we're under cygwin and path was specified as msdos style, convert + # it to cygwin style to avoid problems. + if ($^O eq "cygwin" && $config{path} =~ /^[a-zA-Z]:[\/\\]/) { + $ENV{PATH} = ""; + foreach my $path (split(/;/, $config{path})) { + $ENV{PATH} .= "$path:" if (msdos_to_cygwin_path(\$path)); + } + chop($ENV{PATH}); + } else { + $ENV{PATH} = $config{path}; + } + + # Reset environment variables that may cause trouble. + delete @ENV{'IFS', 'CDPATH', 'ENV', 'BASH_ENV'}; + + # Make sure $config{update_files} is a valid regexp. + eval { + "foo" =~ /$config{update_files}/; + }; + + clean_exit("update_files (\"$config{update_files}\") is not a valid regexp: $@") + if ($@); + + # Make sure $config{rule_actions} is a valid regexp. + eval { + "foo" =~ /$config{rule_actions}/; + }; + + clean_exit("rule_actions (\"$config{rule_actions}\") is not a valid regexp: $@") + if ($@); + + # If a variable file (probably local snort.conf) has been specified, + # it must exist. It must also be writable unless we're in careful mode. + if ($config{update_vars}) { + $config{varfile} = untaint_path($config{varfile}); + + clean_exit("variable file \"$config{varfile}\" does not exist.") + unless (-e "$config{varfile}"); + + clean_exit("variable file \"$config{varfile}\" is not a file.") + unless (-f "$config{varfile}"); + + clean_exit("variable file \"$config{varfile}\" is not writable by you.") + if (!$config{careful} && !-w "$config{varfile}"); + + # Make sure dist var files don't contain [back]slashes + # (probably means user confused it with local var file). + my %dist_var_files; + foreach my $dist_var_file (@{${config{dist_var_files}}}) { + clean_exit("variable file \"$dist_var_file\" specified multiple times") + if (exists($dist_var_files{$dist_var_file})); + $dist_var_files{$dist_var_file} = 1; + clean_exit("variable file \"$dist_var_file\" contains slashes or backslashes ". + "but it must be specified as a filename (without path) ". + "that exists in the downloaded rules, e.g. \"snort.conf\"") + if ($dist_var_file =~ /\// || $dist_var_file =~ /\\/); + } + } + + # Make sure all required binaries can be found, unless + # we're used to use Perl modules instead. + # Wget is only required if url is http[s] or ftp. + if ($config{use_external_bins}) { + foreach my $binary (@req_binaries) { + clean_exit("$binary not found in PATH ($ENV{PATH}).") + unless (is_in_path($binary)); + } + } + + # Make sure $url is defined (either by -u <url> or url=... in the conf). + clean_exit("URL not specified. Specify at least one \"url=<url>\" in the \n". + "Oinkmaster configuration file or use the \"-u <url>\" argument") + if ($#{$config{url}} == -1); + + # Make sure all urls look ok, and untaint them. + my @urls = @{$config{url}}; + $#{$config{url}} = -1; + foreach my $url (@urls) { + clean_exit("incorrect URL: \"$url\"") + unless ($url =~ /^((?:https*|ftp|file|scp):\/\/.+\.(?:tar\.gz|tgz))$/ + || $url =~ /^(dir:\/\/.+)/); + my $ok_url = $1; + + if ($ok_url =~ /^dir:\/\/(.+)/) { + my $dir = untaint_path($1); + clean_exit("\"$dir\" does not exist or is not a directory") + unless (-d $dir); + + # Simple check if the output dir is specified as url (probably a mistake). + if (File::Spec->canonpath(File::Spec->rel2abs($dir)) + eq File::Spec->canonpath(File::Spec->rel2abs($config{output_dir}))) { + clean_exit("Download directory can not be same as output directory"); + } + } + push(@{$config{url}}, $ok_url); + } + + # Wget must be found if url is http[s]:// or ftp://. + if ($config{use_external_bins}) { + clean_exit("wget not found in PATH ($ENV{PATH}).") + if ($config{'url'} =~ /^(https*|ftp):/ && !is_in_path("wget")); + } + + # scp must be found if scp://... + clean_exit("scp not found in PATH ($ENV{PATH}).") + if ($config{'url'} =~ /^scp:/ && !is_in_path("scp")); + + # ssh key must exist if specified and url is scp://... + clean_exit("ssh key \"$config{scp_key}\" does not exist.") + if ($config{'url'} =~ /^scp:/ && exists($config{scp_key}) + && !-e $config{scp_key}); + + # Untaint output directory string. + $config{output_dir} = untaint_path($config{output_dir}); + + # Make sure the output directory exists and is readable. + clean_exit("the output directory \"$config{output_dir}\" doesn't exist ". + "or isn't readable by you.") + if (!-d "$config{output_dir}" || !-x "$config{output_dir}"); + + # Make sure the output directory is writable unless running in careful mode. + clean_exit("the output directory \"$config{output_dir}\" isn't writable by you.") + if (!$config{careful} && !-w "$config{output_dir}"); + + # Make sure we have read permission on all rules files in the output dir, + # and also write permission unless we're in careful mode. + # This is to avoid bailing out in the middle of an execution if a copy + # fails because of permission problem. + opendir(OUTDIR, "$config{output_dir}") + or clean_exit("could not open directory $config{output_dir}: $!"); + + while ($_ = readdir(OUTDIR)) { + next if (/^\.\.?$/ || exists($config{file_ignore_list}{$_})); + + if (/$config{update_files}/) { + unless (-r "$config{output_dir}/$_") { + closedir(OUTDIR); + clean_exit("no read permission on \"$config{output_dir}/$_\"\n". + "Read permission is required on all rules files ". + "inside the output directory.\n") + } + + if (!$config{careful} && !-w "$config{output_dir}/$_") { + closedir(OUTDIR); + clean_exit("no write permission on \"$config{output_dir}/$_\"\n". + "Write permission is required on all rules files ". + "inside the output directory.\n") + } + } + } + + closedir(OUTDIR); + + # Make sure the backup directory exists and is writable if running with -b. + if ($config{make_backup}) { + $config{backup_dir} = untaint_path($config{backup_dir}); + clean_exit("the backup directory \"$config{backup_dir}\" doesn't exist or ". + "isn't writable by you.") + if (!-d "$config{backup_dir}" || !-w "$config{backup_dir}"); + } + + # Convert tmp_basedir to cygwin style if running cygwin and msdos style was specified. + if ($^O eq "cygwin" && $config{tmp_basedir} =~ /^[a-zA-Z]:[\/\\]/) { + msdos_to_cygwin_path(\$config{tmp_basedir}) + or clean_exit("could not convert temporary dir to cygwin style"); + } + + # Make sure temporary directory exists. + clean_exit("the temporary directory \"$config{tmp_basedir}\" does not ". + "exist or isn't writable by you.") + if (!-d "$config{tmp_basedir}" || !-w "$config{tmp_basedir}"); + + # Also untaint it. + $config{tmp_basedir} = untaint_path($config{tmp_basedir}); + + # Make sure stdin and stdout are ttys if we're running in interactive mode. + clean_exit("you can not run in interactive mode when STDIN/STDOUT is not a TTY.") + if ($config{interactive} && !(-t STDIN && -t STDOUT)); +} + + + +# Download the rules archive. +sub download_file($ $) +{ + my $url = shift; + my $localfile = shift; + my $log = "$tmpdir/wget.log"; + my $ret; + + # If there seems to be a password in the url, replace it with "*password*" + # and use new string when printing the url to screen. + my $obfuscated_url = $url; + $obfuscated_url = "$1:*password*\@$2" + if ($obfuscated_url =~ /^(\S+:\/\/.+?):.+?@(.+)/); + + # Ofbuscate oinkcode as well. + $obfuscated_url = "$1*oinkcode*$2" + if ($obfuscated_url =~ /^(\S+:\/\/.+\.cgi\/)[0-9a-z]{32,64}(\/.+)/i); + + my @user_agent_opt; + @user_agent_opt = ("-U", $config{user_agent}) if (exists($config{user_agent})); + + # Use wget if URL starts with "http[s]" or "ftp" and we use external binaries. + if ($config{use_external_bins} && $url =~ /^(?:https*|ftp)/) { + print STDERR "Downloading file from $obfuscated_url... " + unless ($config{quiet}); + + if ($config{verbose}) { + print STDERR "\n"; + my @wget_cmd = ("wget", "-v", "-O", $localfile, $url, @user_agent_opt); + clean_exit("could not download from $obfuscated_url") + if (system(@wget_cmd)); + + } else { + my @wget_cmd = ("wget", "-v", "-o", $log, "-O", $localfile, $url, @user_agent_opt); + if (system(@wget_cmd)) { + my $log_output; + open(LOG, "<", "$log") + or clean_exit("could not open $log for reading: $!"); + # Sanitize oinkcode in wget's log (password is automatically sanitized). + while (<LOG>) { + $_ = "$1*oinkcode*$2" + if (/(\S+:\/\/.+\.cgi\/)[0-9a-z]{32,64}(\/.+)/i); + $log_output .= $_; + } + close(LOG); + clean_exit("could not download from $obfuscated_url. ". + "Output from wget follows:\n\n $log_output"); + } + print STDERR "done.\n" unless ($config{quiet}); + } + + # Use LWP if URL starts with "http[s]" or "ftp" and use_external_bins=0. + } elsif (!$config{use_external_bins} && $url =~ /^(?:https*|ftp)/) { + print STDERR "Downloading file from $obfuscated_url... " + unless ($config{quiet}); + + my %lwp_opt; + $lwp_opt{agent} = $config{user_agent} if (exists($config{user_agent})); + + my $ua = LWP::UserAgent->new(%lwp_opt); + $ua->env_proxy; + my $request = HTTP::Request->new(GET => $url); + my $response = $ua->request($request, $localfile); + + clean_exit("could not download from $obfuscated_url: " . $response->status_line) + unless $response->is_success; + + print "done.\n" unless ($config{quiet}); + + # Grab file from local filesystem if file://... + } elsif ($url =~ /^file/) { + $url =~ s/^file:\/\///; + + clean_exit("the file $url does not exist.") + unless (-e "$url"); + + clean_exit("the file $url is empty.") + unless (-s "$url"); + + print STDERR "Copying file from $url... " + unless ($config{quiet}); + + copy("$url", "$localfile") + or clean_exit("unable to copy $url to $localfile: $!"); + + print STDERR "done.\n" + unless ($config{quiet}); + + # Grab file using scp if scp://... + } elsif ($url =~ /^scp/) { + $url =~ s/^scp:\/\///; + + my @cmd; + push(@cmd, "scp"); + push(@cmd, "-i", "$config{scp_key}") if (exists($config{scp_key})); + push(@cmd, "-q") if ($config{quiet}); + push(@cmd, "-v") if ($config{verbose}); + push(@cmd, "$url", "$localfile"); + + print STDERR "Copying file from $url using scp:\n" + unless ($config{quiet}); + + clean_exit("scp returned error when trying to copy $url") + if (system(@cmd)); + + # Unknown download method. + } else { + clean_exit("unknown or unsupported download method\n"); + } + + # Make sure the downloaded file actually exists. + clean_exit("failed to download $url: ". + "local target file $localfile doesn't exist after download.") + unless (-e "$localfile"); + + # Also make sure it's at least non-empty. + clean_exit("failed to download $url: local target file $localfile is empty ". + "after download (perhaps you're out of diskspace or file in url is empty?)") + unless (-s "$localfile"); +} + + + +# Copy all rules files from the tmp dirs (one for each url) +# into a single directory inside the tmp dir, except for files +# matching a 'skipfile' directive'. +# Will exit in case of colliding filenames. +sub join_tmp_rules_dirs($ $ @) +{ + my $rules_dir = shift; + my $new_files_ref = shift; + my @url_tmpdirs = @_; + + my %rules_files; + + clean_exit("failed to create directory \"$rules_dir\": $!") + unless (mkdir($rules_dir)); + + foreach my $url_tmpdir (@url_tmpdirs) { + opendir(URL_TMPDIR, "$url_tmpdir") + or clean_exit("could not open directory \"$url_tmpdir\": $!"); + + while ($_ = readdir(URL_TMPDIR)) { + next if (/^\.\.?$/ || exists($config{file_ignore_list}{$_}) || !/$config{update_files}/); + + if (exists($rules_files{$_})) { + closedir(URL_TMPDIR); + clean_exit("a file called \"$_\" exists in multiple rules archives") + } + + # Make sure it's a regular file. + unless (-f "$url_tmpdir/$_" && !-l "$url_tmpdir/$_") { + closedir(URL_TMPDIR); + clean_exit("downloaded \"$_\" is not a regular file.") + } + + $rules_files{$_} = 1; + $$new_files_ref{"$rules_dir/$_"} = 1; + + my $src_file = untaint_path("$url_tmpdir/$_"); + unless (copy("$src_file", "$rules_dir")) { + closedir(URL_TMPDIR); + clean_exit("could not copy \"$src_file\" to \"$rules_dir\": $!"); + } + } + + closedir(URL_TMPDIR); + } + + return (keys(%$new_files_ref)); +} + + + +# Make a few basic sanity checks on the rules archive and then +# uncompress/untar it if everything looked ok. +sub unpack_rules_archive($ $ $) +{ + my $url = shift; # only used when printing warnings/errors + my $archive = shift; + my $rules_dir = shift; + + my ($tar, @tar_content); + + my $old_dir = untaint_path(File::Spec->rel2abs(File::Spec->curdir())); + + my $dir = dirname($archive); + chdir("$dir") or clean_exit("$url: could not change directory to \"$dir\": $!"); + + if ($config{use_external_bins}) { + + # Run integrity check on the gzip file. + clean_exit("$url: integrity check on gzip file failed (file transfer failed or ". + "file in URL not in gzip format?).") + if (system("gzip", "-t", "$archive")); + + # Decompress it. + system("gzip", "-d", "$archive") + and clean_exit("$url: unable to uncompress $archive."); + + # Suffix has now changed from .tar.gz|.tgz to .tar. + $archive =~ s/\.gz$//; + + # Make sure the .tar file now exists. + # (Gzip may not return an error if it was not a gzipped file...) + clean_exit("$url: failed to unpack gzip file (file transfer failed or ". + "file in URL not in tar'ed gzip format?).") + unless (-e "$archive"); + + my $stdout_file = "$tmpdir/tar_content.out"; + + open(OLDOUT, ">&STDOUT") or clean_exit("could not dup STDOUT: $!"); + open(STDOUT, ">$stdout_file") or clean_exit("could not redirect STDOUT: $!"); + + my $ret = system("tar", "tf", "$archive"); + + close(STDOUT); + open(STDOUT, ">&OLDOUT") or clean_exit("could not dup STDOUT: $!"); + close(OLDOUT); + + clean_exit("$url: could not list files in tar archive (is it broken?)") + if ($ret); + + open(TAR, "$stdout_file") or clean_exit("failed to open $stdout_file: $!"); + @tar_content = <TAR>; + close(TAR); + + # use_external_bins=0 + } else { + $tar = Archive::Tar->new($archive, 1); + clean_exit("$url: failed to read $archive (file transfer failed or ". + "file in URL not in tar'ed gzip format?).") + unless (defined($tar)); + @tar_content = $tar->list_files(); + } + + # Make sure we could grab some content from the tarball. + clean_exit("$url: could not list files in tar archive (is it broken?)") + if ($#tar_content < 0); + + # For each filename in the archive, do some basic sanity checks. + foreach my $filename (@tar_content) { + chomp($filename); + + # We don't want absolute filename. + clean_exit("$url: rules archive contains absolute filename. ". + "Offending file/line:\n$filename") + if ($filename =~ /^\//); + + # We don't want to have any weird characters anywhere in the filename. + clean_exit("$url: illegal character in filename in tar archive. Allowed are ". + "$OK_PATH_CHARS\nOffending file/line:\n$filename") + if ($config{use_path_checks} && $filename =~ /[^$OK_PATH_CHARS]/); + + # We don't want to unpack any "../../" junk (check is useless now though). + clean_exit("$url: filename in tar archive contains \"..\".\n". + "Offending file/line:\n$filename") + if ($filename =~ /\.\./); + } + + # Looks good. Now we can untar it. + print STDERR "Archive successfully downloaded, unpacking... " + unless ($config{quiet}); + + if ($config{use_external_bins}) { + clean_exit("failed to untar $archive.") + if system("tar", "xf", "$archive"); + } else { + mkdir("$rules_dir") or clean_exit("could not create \"$rules_dir\" directory: $!\n"); + foreach my $file ($tar->list_files) { + next unless ($file =~ /^$rules_dir\/[^\/]+$/); # only ^rules/<file>$ + + my $content = $tar->get_content($file); + + # Symlinks in the archive will make get_content return undef. + clean_exit("could not get content from file \"$file\" in downloaded archive, ". + "make sure it is a regular file\n") + unless (defined($content)); + + open(RULEFILE, ">", "$file") + or clean_exit("could not open \"$file\" for writing: $!\n"); + print RULEFILE $content; + close(RULEFILE); + } + } + + # Make sure that non-empty rules directory existed in archive. + # We permit empty rules directory if min_files is set to 0 though. + clean_exit("$url: no \"$rules_dir\" directory found in tar file.") + unless (-d "$dir/$rules_dir"); + + my $num_files = 0; + opendir(RULESDIR, "$dir/$rules_dir") + or clean_exit("could not open directory \"$dir/$rules_dir\": $!"); + + while ($_ = readdir(RULESDIR)) { + next if (/^\.\.?$/); + $num_files++; + } + + closedir(RULESDIR); + + clean_exit("$url: directory \"$rules_dir\" in unpacked archive is empty") + if ($num_files == 0 && $config{min_files} != 0); + + chdir($old_dir) + or clean_exit("could not change directory back to $old_dir: $!"); + + print STDERR "done.\n" + unless ($config{quiet}); +} + + + +# Open all rules files in the temporary directory and disable/modify all +# rules/lines as requested in oinkmaster.conf, and then write back to the +# same files. Also clean unwanted whitespaces and duplicate sids from them. +sub process_rules($ $ $ $ $ $) +{ + my $modify_sid_ref = shift; + my $disable_sid_ref = shift; + my $enable_sid_ref = shift; + my $local_sid_ref = shift; + my $rh_tmp_ref = shift; + my $newfiles_ref = shift; + my %sids; + + my %stats = ( + disabled => 0, + enabled => 0, + modified => 0, + total => 0, + ); + + warn("WARNING: all rules that are disabled by default will be enabled\n") + if ($config{enable_all} && !$config{quiet}); + + print STDERR "Processing downloaded rules... " + unless ($config{quiet}); + + print STDERR "\n" + if ($config{verbose}); + + # Phase #1 - process all active rules and store in temporary hash. + # In case of dups, we use the one with the highest rev. + foreach my $file (sort(keys(%$newfiles_ref))) { + + open(INFILE, "<", "$file") + or clean_exit("could not open $file for reading: $!"); + my @infile = <INFILE>; + close(INFILE); + + my ($single, $multi, $nonrule, $msg, $sid); + + RULELOOP:while (get_next_entry(\@infile, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + + # We don't care about non-rules in this phase. + next RULELOOP if (defined($nonrule)); + + # Even if it was a single-line rule, we want a copy in $multi. + $multi = $single unless (defined($multi)); + + my %rule = ( + single => $single, + multi => $multi, + ); + + # modify/disable/enable this rule as requested unless there is a matching + # localsid statement. Possible verbose messages and warnings will be printed. + unless (exists($$local_sid_ref{$sid})) { + process_rule($modify_sid_ref, $disable_sid_ref, $enable_sid_ref, + \%rule, $sid, \%stats, 1, basename($file)); + } + + $stats{total}++; + + $single = $rule{single}; + $multi = $rule{multi}; + + # Only care about active rules in this phase (the rule may have been + # disabled by a disablesid or a modifysid statement above, so we can't + # do this check earlier). + next RULELOOP if ($multi =~ /^#/); + + # Is it a dup? If so, see if this seems to be more recent (higher rev). + if (exists($sids{$sid})) { + warn("\nWARNING: duplicate SID in downloaded archive, SID=$sid, ". + "only keeping rule with highest 'rev'\n") + unless($config{super_quiet}); + + my ($old_rev) = ($sids{$sid}{single} =~ /\brev\s*:\s*(\d+)\s*;/); + my ($new_rev) = ($single =~ /\brev\s*:\s*(\d+)\s*;/); + + # This is so rules with a rev gets higher prio than + # rules without any rev. + $old_rev = -1 unless (defined($old_rev)); + $new_rev = -1 unless (defined($new_rev)); + + # If this rev is higher than the one in the last stored rule with + # this sid, replace rule with this one. This is also done if the + # revs are equal because we assume the rule appearing last in the + # rules file is the more recent rule. + if ($new_rev >= $old_rev) { + $sids{$sid}{single} = $single; + $sids{$sid}{multi} = $multi; + } + + # No dup. + } else { + $sids{$sid}{single} = $single; + $sids{$sid}{multi} = $multi; + } + } + } + + # Phase #2 - read all rules files again, but when writing active rules + # back to the files, use the one stored in the sid hash (which is free of dups). + foreach my $file (sort(keys(%$newfiles_ref))) { + + open(INFILE, "<", "$file") + or clean_exit("could not open $file for reading: $!"); + my @infile = <INFILE>; + close(INFILE); + + # Write back to the same file. + open(OUTFILE, ">", "$file") + or clean_exit("could not open $file for writing: $!"); + + my ($single, $multi, $nonrule, $msg, $sid); + + RULELOOP:while (get_next_entry(\@infile, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + if (defined($nonrule)) { + print OUTFILE "$nonrule"; + next RULELOOP; + } + + # Even if it was a single-line rule, we want a copy in $multi. + $multi = $single unless (defined($multi)); + + # If this rule is marked as localized and has not yet been written, + # write the old version to the new rules file. + if (exists($$local_sid_ref{$sid}) && !exists($sids{$sid}{printed})) { + + # Just ignore the rule in the downloaded file if it doesn't + # exist in the same local file. + unless(exists($$rh_tmp_ref{old}{rules}{basename($file)}{$sid})) { + warn("WARNING: SID $sid is marked as local and exists in ". + "downloaded " . basename($file) . " but the SID does not ". + "exist in the local file, ignoring rule\n") + if ($config{verbose}); + + next RULELOOP; + } + + print OUTFILE $$rh_tmp_ref{old}{rules}{basename($file)}{$sid}; + $sids{$sid}{printed} = 1; + + warn("SID $sid is marked as local, keeping your version from ". + basename($file) . ".\n". + "Your version: $$rh_tmp_ref{old}{rules}{basename($file)}{$sid}". + "Downloaded version: $multi\n") + if ($config{verbose}); + + next RULELOOP; + } + + my %rule = ( + single => $single, + multi => $multi, + ); + + # modify/disable/enable this rule. Possible verbose messages and warnings + # will not be printed (again) as this was done in the first phase. + # We send the stats to a dummy var as this was collected on the + # first phase as well. + process_rule($modify_sid_ref, $disable_sid_ref, $enable_sid_ref, + \%rule, $sid, \my %unused_stats, 0, basename($file)); + + $single = $rule{single}; + $multi = $rule{multi}; + + # Disabled rules are printed right back to the file, unless + # there also is an active rule with the same sid. Als o make + # sure we only print the sid once, even though it's disabled. + if ($multi =~ /^#/ && !exists($sids{$sid}) && !exists($sids{$sid}{printed})) { + print OUTFILE $multi; + $sids{$sid}{printed} = 1; + next RULELOOP; + } + + # If this sid has not yet been printed and this is the place where + # the sid with the highest rev was, print the rule to the file. + # (There can be multiple totally different rules with the same sid + # and we don't want to put the wrong rule in the wrong place. + if (!exists($sids{$sid}{printed}) && $single eq $sids{$sid}{single}) { + print OUTFILE $multi; + $sids{$sid}{printed} = 1; + } + } + + close(OUTFILE); + } + + print STDERR "disabled $stats{disabled}, enabled $stats{enabled}, ". + "modified $stats{modified}, total=$stats{total}\n" + unless ($config{quiet}); + + # Print warnings on attempt at enablesid/disablesid/localsid on non-existent + # rule if we're in verbose mode. + if ($config{verbose}) { + foreach my $sid (keys(%$enable_sid_ref)) { + warn("WARNING: attempt to use \"enablesid\" on non-existent SID $sid\n") + unless (exists($sids{$sid})); + } + + foreach my $sid (keys(%$disable_sid_ref)) { + warn("WARNING: attempt to use \"disablesid\" on non-existent SID $sid\n") + unless (exists($sids{$sid})); + } + + foreach my $sid (keys(%$local_sid_ref)) { + warn("WARNING: attempt to use \"localsid\" on non-existent SID $sid\n") + unless (exists($sids{$sid})); + } + } + + # Print warnings on attempt at modifysid'ing non-existent stuff, unless quiet mode. + unless ($config{quiet}) { + my %new_files; + foreach my $file (sort(keys(%$newfiles_ref))) { + $new_files{basename($file)} = 1; + } + + my %mod_tmp; + foreach my $mod_expr (@$modify_sid_ref) { + my ($type, $arg) = ($mod_expr->[2], $mod_expr->[3]); + $mod_tmp{$type}{$arg} = 1; + } + + foreach my $sid (keys(%{$mod_tmp{sid}})) { + warn("WARNING: attempt to use \"modifysid\" on non-existent SID $sid\n") + unless (exists($sids{$sid})); + } + + foreach my $file (keys(%{$mod_tmp{file}})) { + warn("WARNING: attempt to use \"modifysid\" on non-existent file $file\n") + unless(exists($new_files{$file})); + } + } + + # Return total number of valid rules. + return ($stats{total}); +} + + + +# Process (modify/enable/disable) a rule as requested. +sub process_rule($ $ $ $ $ $ $ $) +{ + my $modify_sid_ref = shift; + my $disable_sid_ref = shift; + my $enable_sid_ref = shift; + my $rule_ref = shift; + my $sid = shift; + my $stats_ref = shift; + my $print_messages = shift; + my $filename = shift; + + # Just for easier access. + my $single = $$rule_ref{single}; + my $multi = $$rule_ref{multi}; + + # Some rules may be commented out by default. + # Enable them if -e is specified (both single-line and multi-line, + # version, because we don't know which version one we're going to + # use below. + # Enable them if -e is specified. + if ($multi =~ /^#/ && $config{enable_all}) { + $multi =~ s/^#*//; + $multi =~ s/\n#*/\n/g; + $single =~ s/^#*//; + $$stats_ref{enabled}++; + } + + # Modify rule if requested. For disablesid/enablesid we work + # on the multi-line version of the rule (if exists). For + # modifysid that's no good since we don't know where in the + # rule the trailing backslashes and newlines are going to be + # and we don't want them to affect the regexp. + MOD_EXP:foreach my $mod_expr (@$modify_sid_ref) { + my ($subst, $repl, $type, $arg) = + ($mod_expr->[0], $mod_expr->[1], $mod_expr->[2], $mod_expr->[3]); + + my $print_modify_warnings = 0; + $print_modify_warnings = 1 if (!$config{super_quiet} && $print_messages && $type eq "sid"); + + if ($type eq "wildcard" || ($type eq "sid" && $sid eq $arg) || + ($type eq "file" && $filename eq $arg)) { + + if ($single =~ /$subst/si) { + print STDERR "Modifying rule, SID=$sid, filename=$filename, ". + "match type=$type, subst=$subst, ". + "repl=$repl\nBefore: $single" + if ($print_messages && $config{verbose}); + + + # If user specified a backreference but the regexp did not set $1 - don't modify rule. + if (!defined($1) && ($repl =~ /[^\\]\$\d+/ || $repl =~ /[^\\]\$\{\d+\}/ + || $repl =~ /^qq\/\$\d+/ || $repl =~ /^qq\/\$\{\d+\}/)) { + warn("WARNING: SID $sid matches modifysid expression \"$subst\" but ". + "backreference variable \$1 is undefined after match, ". + "keeping original rule\n") + if ($print_modify_warnings); + next MOD_EXP; + } + + # Do the substitution on the single-line version and put it + # back in $multi. + $single =~ s/$subst/$repl/eei; + $multi = $single; + + print STDERR "After: $single\n" + if ($print_messages && $config{verbose}); + + $$stats_ref{modified}++; + } else { + if ($print_modify_warnings) { + warn("WARNING: SID $sid does not match modifysid ". + "expression \"$subst\", keeping original rule\n"); + } + } + } + } + + # Disable rule if requested and it's not already disabled. + if (exists($$disable_sid_ref{$sid}) && $multi !~ /^\s*#/) { + $multi = "#$multi"; + $multi =~ s/\n([^#].+)/\n#$1/g; + $$stats_ref{disabled}++; + } + + # Enable rule if requested and it's not already enabled. + if (exists($$enable_sid_ref{$sid}) && $multi =~ /^\s*#/) { + $multi =~ s/^#+//; + $multi =~ s/\n#+(.+)/\n$1/g; + $$stats_ref{enabled}++; + } + + $$rule_ref{single} = $single; + $$rule_ref{multi} = $multi; +} + + + +# Setup rules hash. +# Format for rules will be: rh{old|new}{rules{filename}{sid} = single-line rule +# Format for non-rules will be: rh{old|new}{other}{filename} = array of lines +# List of added files will be stored as rh{added_files}{filename} +sub setup_rules_hash($ $) +{ + my $new_files_ref = shift; + my $output_dir = shift; + + my (%rh, %old_sids); + + print STDERR "Setting up rules structures... " + unless ($config{quiet}); + + foreach my $file (sort(keys(%$new_files_ref))) { + warn("\nWARNING: downloaded rules file $file is empty\n") + if (!-s "$file" && $config{verbose}); + + open(NEWFILE, "<", "$file") + or clean_exit("could not open $file for reading: $!"); + my @newfile = <NEWFILE>; + close(NEWFILE); + + # From now on we don't care about the path, so remove it. + $file = basename($file); + + my ($single, $multi, $nonrule, $msg, $sid); + + while (get_next_entry(\@newfile, \$single, \$multi, \$nonrule, \$msg, \$sid)) { + if (defined($single)) { + $rh{new}{rules}{"$file"}{"$sid"} = $single; + } else { + push(@{$rh{new}{other}{"$file"}}, $nonrule); + } + } + + # Also read in old (aka local) file if it exists. + # We do a sid dup check in these files. + if (-f "$output_dir/$file") { + open(OLDFILE, "<", "$output_dir/$file") + or clean_exit("could not open $output_dir/$file for reading: $!"); + my @oldfile = <OLDFILE>; + close(OLDFILE); + + while (get_next_entry(\@oldfile, \$single, \$multi, \$nonrule, undef, \$sid)) { + if (defined($single)) { + warn("\nWARNING: duplicate SID in your local rules, SID ". + "$sid exists multiple times, you may need to fix this manually!\n") + if (exists($old_sids{$sid})); + + $rh{old}{rules}{"$file"}{"$sid"} = $single; + $old_sids{$sid}++; + } else { + push(@{$rh{old}{other}{"$file"}}, $nonrule); + } + } + } else { + $rh{added_files}{"$file"}++; + } + } + + print STDERR "done.\n" + unless ($config{quiet}); + + return (%rh); +} + + + +# Return lines that exist only in first array but not in second one. +sub get_first_only($ $ $) +{ + my $first_only_ref = shift; + my $first_arr_ref = shift; + my $second_arr_ref = shift; + my %arr_hash; + + @arr_hash{@$second_arr_ref} = (); + + foreach my $line (@$first_arr_ref) { + + # Skip blank lines and CVS Id tags. + next unless ($line =~ /\S/); + next if ($line =~ /^\s*#+\s*\$I\S:.+Exp\s*\$/); + + push(@$first_only_ref, $line) + unless(exists($arr_hash{$line})); + } +} + + + +# Backup files in output dir matching $config{update_files} into the backup dir. +sub make_backup($ $) +{ + my $src_dir = shift; # dir with the rules to be backed up + my $dest_dir = shift; # where to put the backup tarball + + my ($sec, $min, $hour, $mday, $mon, $year) = (localtime)[0 .. 5]; + + my $date = sprintf("%4d%02d%02d-%02d%02d%02d", + $year + 1900, $mon + 1, $mday, $hour, $min, $sec); + + my $backup_tarball = "rules-backup-$date.tar"; + my $backup_tmp_dir = File::Spec->catdir("$tmpdir", "rules-backup-$date"); + my $dest_file = File::Spec->catfile("$dest_dir", "$backup_tarball.gz"); + + print STDERR "Creating backup of old rules..." + unless ($config{quiet}); + + mkdir("$backup_tmp_dir", 0700) + or clean_exit("could not create temporary backup directory $backup_tmp_dir: $!"); + + # Copy all rules files from the rules dir to the temporary backup dir. + opendir(OLDRULES, "$src_dir") + or clean_exit("could not open directory $src_dir: $!"); + + while ($_ = readdir(OLDRULES)) { + next if (/^\.\.?$/); + if (/$config{update_files}/) { + my $src_file = untaint_path("$src_dir/$_"); + copy("$src_file", "$backup_tmp_dir/") + or warn("WARNING: could not copy $src_file to $backup_tmp_dir/: $!"); + } + } + + closedir(OLDRULES); + + # Also backup the -U <file> (as "variable-file.conf") if specified. + if ($config{update_vars}) { + copy("$config{varfile}", "$backup_tmp_dir/variable-file.conf") + or warn("WARNING: could not copy $config{varfile} to $backup_tmp_dir: $!") + } + + my $old_dir = untaint_path(File::Spec->rel2abs(File::Spec->curdir())); + + # Change directory to $tmpdir (so we'll be right below the directory where + # we have our rules to be backed up). + chdir("$tmpdir") or clean_exit("could not change directory to $tmpdir: $!"); + + if ($config{use_external_bins}) { + clean_exit("tar command returned error when archiving backup files.\n") + if (system("tar","cf","$backup_tarball","rules-backup-$date")); + + clean_exit("gzip command returned error when compressing backup file.\n") + if (system("gzip","$backup_tarball")); + + $backup_tarball .= ".gz"; + + } else { + my $tar = Archive::Tar->new; + opendir(RULES, "rules-backup-$date") + or clean_exit("unable to open directory \"rules-backup-$date\": $!"); + + while ($_ = readdir(RULES)) { + next if (/^\.\.?$/); + $tar->add_files("rules-backup-$date/$_"); + } + + closedir(RULES); + + $backup_tarball .= ".gz"; + + # Write tarball. Print stupid error message if it fails as + # we can't use $tar->error or Tar::error on all platforms. + $tar->write("$backup_tarball", 1); + + clean_exit("could not create backup archive: tarball empty after creation\n") + unless (-s "$backup_tarball"); + } + + # Change back to old directory (so it will work with -b <directory> as either + # an absolute or a relative path. + chdir("$old_dir") + or clean_exit("could not change directory back to $old_dir: $!"); + + copy("$tmpdir/$backup_tarball", "$dest_file") + or clean_exit("unable to copy $tmpdir/$backup_tarball to $dest_file/: $!\n"); + + print STDERR " saved as $dest_file.\n" + unless ($config{quiet}); +} + + + +# Print the results. +sub print_changes($ $) +{ + my $ch_ref = shift; + my $rh_ref = shift; + + my ($sec, $min, $hour, $mday, $mon, $year) = (localtime)[0 .. 5]; + + my $date = sprintf("%4d%02d%02d %02d:%02d:%02d", + $year + 1900, $mon + 1, $mday, $hour, $min, $sec); + + print "\n[***] Results from Oinkmaster started $date [***]\n"; + + # Print new variables. + if ($config{update_vars}) { + if ($#{$$ch_ref{new_vars}} > -1) { + print "\n[*] New variables: [*]\n"; + foreach my $var (@{$$ch_ref{new_vars}}) { + print " $var"; + } + } else { + print "\n[*] New variables: [*]\n None.\n" + unless ($config{super_quiet}); + } + } + + + # Print rules modifications. + print "\n[*] Rules modifications: [*]\n None.\n" + if (!keys(%{$$ch_ref{rules}}) && !$config{super_quiet}); + + # Print added rules. + if (exists($$ch_ref{rules}{added})) { + print "\n[+++] Added rules: [+++]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{added}}, $rh_ref); + } else { + print_changetype($PRINT_NEW, "Added to", + \%{$$ch_ref{rules}{added}}, $rh_ref); + } + } + + # Print enabled rules. + if (exists($$ch_ref{rules}{ena})) { + print "\n[+++] Enabled rules: [+++]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{ena}}, $rh_ref); + } else { + print_changetype($PRINT_NEW, "Enabled in", + \%{$$ch_ref{rules}{ena}}, $rh_ref); + } + } + + # Print enabled + modified rules. + if (exists($$ch_ref{rules}{ena_mod})) { + print "\n[+++] Enabled and modified rules: [+++]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{ena_mod}}, $rh_ref); + } else { + print_changetype($PRINT_BOTH, "Enabled and modified in", + \%{$$ch_ref{rules}{ena_mod}}, $rh_ref); + } + } + + # Print modified active rules. + if (exists($$ch_ref{rules}{mod_act})) { + print "\n[///] Modified active rules: [///]\n"; + + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{mod_act}}, $rh_ref); + } else { + print_changetype($PRINT_BOTH, "Modified active in", + \%{$$ch_ref{rules}{mod_act}}, $rh_ref); + } + } + + # Print modified inactive rules. + if (exists($$ch_ref{rules}{mod_ina})) { + print "\n[///] Modified inactive rules: [///]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{mod_ina}}, $rh_ref); + } else { + print_changetype($PRINT_BOTH, "Modified inactive in", + \%{$$ch_ref{rules}{mod_ina}}, $rh_ref); + } + } + + # Print disabled + modified rules. + if (exists($$ch_ref{rules}{dis_mod})) { + print "\n[---] Disabled and modified rules: [---]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{dis_mod}}, $rh_ref); + } else { + print_changetype($PRINT_BOTH, "Disabled and modified in", + \%{$$ch_ref{rules}{dis_mod}}, $rh_ref); + } + } + + # Print disabled rules. + if (exists($$ch_ref{rules}{dis})) { + print "\n[---] Disabled rules: [---]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{dis}}, $rh_ref); + } else { + print_changetype($PRINT_NEW, "Disabled in", + \%{$$ch_ref{rules}{dis}}, $rh_ref); + } + } + + # Print removed rules. + if (exists($$ch_ref{rules}{removed})) { + print "\n[---] Removed rules: [---]\n"; + if ($config{summary_output}) { + print_summary_change(\%{$$ch_ref{rules}{removed}}, $rh_ref); + } else { + print_changetype($PRINT_OLD, "Removed from", + \%{$$ch_ref{rules}{removed}}, $rh_ref); + } + } + + + # Print non-rule modifications. + print "\n[*] Non-rule line modifications: [*]\n None.\n" + if (!keys(%{$$ch_ref{other}}) && !$config{super_quiet}); + + # Print added non-rule lines. + if (exists($$ch_ref{other}{added})) { + print "\n[+++] Added non-rule lines: [+++]\n"; + foreach my $file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{other}{added}}))) { + my $num = $#{$$ch_ref{other}{added}{$file}} + 1; + print "\n -> Added to $file ($num):\n"; + foreach my $line (@{$$ch_ref{other}{added}{$file}}) { + print " $line"; + } + } + } + + # Print removed non-rule lines. + if (keys(%{$$ch_ref{other}{removed}}) > 0) { + print "\n[---] Removed non-rule lines: [---]\n"; + foreach my $file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{other}{removed}}))) { + my $num = $#{$$ch_ref{other}{removed}{$file}} + 1; + print "\n -> Removed from $file ($num):\n"; + foreach my $other (@{$$ch_ref{other}{removed}{$file}}) { + print " $other"; + } + } + } + + + # Print list of added files. + if (keys(%{$$ch_ref{added_files}})) { + print "\n[+] Added files (consider updating your snort.conf to include them if needed): [+]\n\n"; + foreach my $added_file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{added_files}}))) { + print " -> $added_file\n"; + } + } else { + print "\n[*] Added files: [*]\n None.\n" + unless ($config{super_quiet} || $config{summary_output}); + } + + # Print list of possibly removed files if requested. + if ($config{check_removed}) { + if (keys(%{$$ch_ref{removed_files}})) { + print "\n[-] Files possibly removed from the archive ". + "(consider removing them from your snort.conf if needed): [-]\n\n"; + foreach my $removed_file (sort({uc($a) cmp uc($b)} keys(%{$$ch_ref{removed_files}}))) { + print " -> $removed_file\n"; + } + } else { + print "\n[*] Files possibly removed from the archive: [*]\n None.\n" + unless ($config{super_quiet} || $config{summary_output}); + } + } + + print "\n"; +} + + + +# Helper for print_changes(). +sub print_changetype($ $ $ $) +{ + my $type = shift; # $PRINT_OLD|$PRINT_NEW|$PRINT_BOTH + my $string = shift; # string to print before filename + my $ch_ref = shift; # reference to an entry in the rules changes hash + my $rh_ref = shift; # reference to rules hash + + foreach my $file (sort({uc($a) cmp uc($b)} keys(%$ch_ref))) { + my $num = keys(%{$$ch_ref{$file}}); + print "\n -> $string $file ($num):\n"; + foreach my $sid (keys(%{$$ch_ref{$file}})) { + if ($type == $PRINT_OLD) { + print " $$rh_ref{old}{rules}{$file}{$sid}" + } elsif ($type == $PRINT_NEW) { + print " $$rh_ref{new}{rules}{$file}{$sid}" + } elsif ($type == $PRINT_BOTH) { + + my $old = $$rh_ref{old}{rules}{$file}{$sid}; + my $new = $$rh_ref{new}{rules}{$file}{$sid}; + + if ($config{minimize_diff}) { + my ($old, $new) = minimize_diff($old, $new); + print "\n old SID $sid: $old"; + print " new SID $sid: $new"; + } else { + print "\n old: $old"; + print " new: $new"; + } + } + } + } +} + + + +# Print changes in bmc style, i.e. only sid and msg, no full details. +sub print_summary_change($ $) +{ + my $ch_ref = shift; # reference to an entry in the rules changes hash + my $rh_ref = shift; # reference to rules hash + + my (@sids, %sidmap); + + print "\n"; + + # First get all the sids (may be spread across multiple files. + foreach my $file (keys(%$ch_ref)) { + foreach my $sid (keys(%{$$ch_ref{$file}})) { + push(@sids, $sid); + if (exists($$rh_ref{new}{rules}{$file}{$sid})) { + $sidmap{$sid}{rule} = $$rh_ref{new}{rules}{$file}{$sid}; + } else { + $sidmap{$sid}{rule} = $$rh_ref{old}{rules}{$file}{$sid}; + } + $sidmap{$sid}{file} = $file; + } + } + + # Print rules, sorted by sid. + foreach my $sid (sort {$a <=> $b} (@sids)) { + my @rule = $sidmap{$sid}{rule}; + my $file = $sidmap{$sid}{file}; + get_next_entry(\@rule, undef, undef, undef, \(my $msg), undef); + printf("%8d - %s (%s)\n", $sid, $msg, $file); + } + + print "\n"; +} + + + +# Compare the new rules to the old ones. +sub get_changes($ $ $) +{ + my $rh_ref = shift; + my $new_files_ref = shift; + my $rules_dir = shift; + my %changes; + + print STDERR "Comparing new files to the old ones... " + unless ($config{quiet}); + + # We have the list of added files (without full path) in $rh_ref{added_files} + # but we'd rather want to have it in $changes{added_files} now. + $changes{added_files} = $$rh_ref{added_files}; + + # New files are also regarded as modified since we want to update + # (i.e. add) those as well. Here we want them with full path. + foreach my $file (keys(%{$changes{added_files}})) { + $changes{modified_files}{"$tmpdir/$rules_dir/$file"}++; + } + + # Add list of possibly removed files if requested. + if ($config{check_removed}) { + opendir(OLDRULES, "$config{output_dir}") + or clean_exit("could not open directory $config{output_dir}: $!"); + + while ($_ = readdir(OLDRULES)) { + next if (/^\.\.?$/); + $changes{removed_files}{"$_"} = 1 + if (/$config{update_files}/ && + !exists($config{file_ignore_list}{$_}) && + !-e "$tmpdir/$rules_dir/$_"); + } + + closedir(OLDRULES); + } + + # For each new rules file... + FILELOOP:foreach my $file_w_path (sort(keys(%$new_files_ref))) { + my $file = basename($file_w_path); + + # Skip comparison if it's an added file. + next FILELOOP if (exists($$rh_ref{added_files}{$file})); + + # For each sid in the new file... + foreach my $sid (keys(%{$$rh_ref{new}{rules}{$file}})) { + my $new_rule = $$rh_ref{new}{rules}{$file}{$sid}; + + # Sid also exists in the old file? + if (exists($$rh_ref{old}{rules}{$file}{$sid})) { + my $old_rule = $$rh_ref{old}{rules}{$file}{$sid}; + + # Are they identical? + unless ($new_rule eq $old_rule) { + $changes{modified_files}{$file_w_path}++; + + # Find out in which way the rules are different. + if ("#$old_rule" eq $new_rule) { + $changes{rules}{dis}{$file}{$sid}++; + } elsif ($old_rule eq "#$new_rule") { + $changes{rules}{ena}{$file}{$sid}++; + } elsif ($old_rule =~ /^\s*#/ && $new_rule !~ /^\s*#/) { + $changes{rules}{ena_mod}{$file}{$sid}++; + } elsif ($old_rule !~ /^\s*#/ && $new_rule =~ /^\s*#/) { + $changes{rules}{dis_mod}{$file}{$sid}++; + } elsif ($old_rule =~ /^\s*#/ && $new_rule =~ /^\s*#/) { + $changes{rules}{mod_ina}{$file}{$sid}++; + } else { + $changes{rules}{mod_act}{$file}{$sid}++; + } + + } + } else { # sid not found in old file, i.e. it's added + $changes{modified_files}{$file_w_path}++; + $changes{rules}{added}{$file}{$sid}++; + } + } # foreach sid + + # Check for removed rules, i.e. sids that exist in the old file but + # not in the new one. + foreach my $sid (keys(%{$$rh_ref{old}{rules}{$file}})) { + unless (exists($$rh_ref{new}{rules}{$file}{$sid})) { + $changes{modified_files}{$file_w_path}++; + $changes{rules}{removed}{$file}{$sid}++; + } + } + + # Check for added non-rule lines. + get_first_only(\my @added, + \@{$$rh_ref{new}{other}{$file}}, + \@{$$rh_ref{old}{other}{$file}}); + + if (scalar(@added)) { + @{$changes{other}{added}{$file}} = @added; + $changes{modified_files}{$file_w_path}++; + } + + # Check for removed non-rule lines. + get_first_only(\my @removed, + \@{$$rh_ref{old}{other}{$file}}, + \@{$$rh_ref{new}{other}{$file}}); + + if (scalar(@removed)) { + @{$changes{other}{removed}{$file}} = @removed; + $changes{modified_files}{$file_w_path}++; + } + + } # foreach new file + + print STDERR "done.\n" unless ($config{quiet}); + + return (%changes); +} + + + +# Simply copy the modified rules files to the output directory. +sub update_rules($ @) +{ + my $dst_dir = shift; + my @modified_files = @_; + + print STDERR "Updating local rules files... " + if (!$config{quiet} || $config{interactive}); + + foreach my $file_w_path (@modified_files) { + copy("$file_w_path", "$dst_dir") + or clean_exit("could not copy $file_w_path to $dst_dir: $!"); + } + + print STDERR "done.\n" + if (!$config{quiet} || $config{interactive}); +} + + +# Simply copy rules files from one dir to another. +# Links are not allowed. +sub copy_rules($ $) +{ + my $src_dir = shift; + my $dst_dir = shift; + + print STDERR "Copying rules from $src_dir... " + if (!$config{quiet} || $config{interactive}); + + opendir(SRC_DIR, $src_dir) + or clean_exit("could not open directory $src_dir: $!"); + + my $num_files = 0; + while ($_ = readdir(SRC_DIR)) { + next if (/^\.\.?$/ || exists($config{file_ignore_list}{$_}) + || !/$config{update_files}/); + + my $src_file = untaint_path("$src_dir/$_"); + + # Make sure it's a regular file. + unless (-f "$src_file" && !-l "$src_file") { + closedir(SRC_DIR); + clean_exit("\"$src_file\" is not a regular file.") + } + + unless (copy($src_file, $dst_dir)) { + closedir(SRC_DIR); + clean_exit("could not copy \"$src_file\" to \"$dst_dir\"/: $!"); + } + $num_files++; + } + + closedir(SRC_DIR); + + print STDERR "$num_files files copied.\n" + if (!$config{quiet} || $config{interactive}); +} + + + +# Return true if file is in PATH and is executable. +sub is_in_path($) +{ + my $file = shift; + + foreach my $dir (File::Spec->path()) { + if ((-f "$dir/$file" && -x "$dir/$file") + || (-f "$dir/$file.exe" && -x "$dir/$file.exe")) { + print STDERR "Found $file binary in $dir\n" + if ($config{verbose}); + return (1); + } + } + + return (0); +} + + + +# get_next_entry() will parse the array referenced in the first arg +# and return the next entry. The array should contain a rules file, +# and the returned entry will be removed from the array. +# An entry is one of: +# - single-line rule (put in 2nd ref) +# - multi-line rule (put in 3rd ref) +# - non-rule line (put in 4th ref) +# If the entry is a multi-line rule, its single-line version is also +# returned (put in the 2nd ref). +# If it's a rule, the msg string will be put in 4th ref and sid in 5th. +sub get_next_entry($ $ $ $ $ $) +{ + my $arr_ref = shift; + my $single_ref = shift; + my $multi_ref = shift; + my $nonrule_ref = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + undef($$single_ref); + undef($$multi_ref); + undef($$nonrule_ref); + undef($$msg_ref); + undef($$sid_ref); + + my $line = shift(@$arr_ref) || return(0); + my $disabled = 0; + my $broken = 0; + + chomp($line); + $line .= "\n"; + + # Possible beginning of multi-line rule? + if ($line =~ /$MULTILINE_RULE_REGEXP/oi) { + $$single_ref = $line; + $$multi_ref = $line; + + $disabled = 1 if ($line =~ /^\s*#/); + + # Keep on reading as long as line ends with "\". + while (!$broken && $line =~ /\\\s*\n$/) { + + # Remove trailing "\" and newline for single-line version. + $$single_ref =~ s/\\\s*\n//; + + # If there are no more lines, this can not be a valid multi-line rule. + if (!($line = shift(@$arr_ref))) { + + warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n") + if ($config{verbose}); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + + # Multi-line continuation. + $$multi_ref .= $line; + + # If there are non-comment lines in the middle of a disabled rule, + # mark the rule as broken to return as non-rule lines. + if ($line !~ /^\s*#/ && $disabled) { + $broken = 1; + } elsif ($line =~ /^\s*#/ && !$disabled) { + # comment line (with trailing slash) in the middle of an active rule - ignore it + } else { + $line =~ s/^\s*#*\s*//; # remove leading # in single-line version + $$single_ref .= $line; + } + + } # while line ends with "\" + + # Single-line version should now be a valid rule. + # If not, it wasn't a valid multi-line rule after all. + if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) { + + $$single_ref =~ s/^\s*//; # remove leading whitespaces + $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading # + $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + $$multi_ref =~ s/^\s*//; + $$multi_ref =~ s/\s*\n$/\n/; + $$multi_ref =~ s/^#+\s*/#/; + + return (1); # return multi + + # Invalid multi-line rule. + } else { + warn("\nWARNING: invalid multi-line rule: $$single_ref\n") + if ($config{verbose} && $$multi_ref !~ /^\s*#/); + + @_ = split(/\n/, $$multi_ref); + + undef($$multi_ref); + undef($$single_ref); + + # First line of broken multi-line rule will be returned as a non-rule line. + $$nonrule_ref = shift(@_) . "\n"; + $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces + + # The rest is put back to the array again. + foreach $_ (reverse((@_))) { + unshift(@$arr_ref, "$_\n"); + } + + return (1); # return non-rule + } + + # Check if it's a regular single-line rule. + } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) { + $$single_ref = $line; + $$single_ref =~ s/^\s*//; + $$single_ref =~ s/^#+\s*/#/; + $$single_ref =~ s/\s*\n$/\n/; + + return (1); # return single + + # Non-rule line. + } else { + + # Do extra check and warn if it *might* be a rule anyway, + # but that we just couldn't parse for some reason. + warn("\nWARNING: line may be a rule but it could not be parsed ". + "(missing sid?): $line\n") + if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/); + + $$nonrule_ref = $line; + $$nonrule_ref =~ s/\s*\n$/\n/; + + return (1); # return non-rule + } +} + + + +# Look for variables that exist in dist var files but not in local var file. +sub get_new_vars($ $ $ $) +{ + my $ch_ref = shift; + my $dist_var_files_ref = shift; + my $local_var_file = shift; + my $url_tmpdirs_ref = shift; + + my %new_vars; + my (%old_vars, %dist_var_files, %found_dist_var_files); + my $confs_found = 0; + + + # Warn in case we can't find a specified dist file. + foreach my $dir (@$url_tmpdirs_ref) { + foreach my $dist_var_file (@$dist_var_files_ref) { + if (-e "$dir/$dist_var_file") { + $found_dist_var_files{$dist_var_file} = 1; + $confs_found++; + } + } + } + + foreach my $dist_var_file (@$dist_var_files_ref) { + unless (exists($found_dist_var_files{$dist_var_file})) { + warn("WARNING: did not find variable file \"$dist_var_file\" in ". + "downloaded archive(s)\n") + unless($config{quiet}); + } + } + + unless ($confs_found) { + unless ($config{quiet}) { + warn("WARNING: no variable files found in downloaded archive(s), ". + "aborting check for new variables\n"); + return; + } + } + + # Read in variable names from old (target) var file. + open(LOCAL_VAR_FILE, "<", "$local_var_file") + or clean_exit("could not open $local_var_file for reading: $!"); + + my @local_var_conf = <LOCAL_VAR_FILE>; + + foreach $_ (join_multilines(\@local_var_conf)) { + $old_vars{lc($1)}++ if (/$VAR_REGEXP/i); + } + + close(LOCAL_VAR_FILE); + + # Read in variables from new file(s). + foreach my $dir (@$url_tmpdirs_ref) { + foreach my $dist_var_file (@$dist_var_files_ref) { + my $conf = "$dir/$dist_var_file"; + if (-e "$conf") { + my $num_new = 0; + print STDERR "Checking downloaded $dist_var_file for new variables... " + unless ($config{quiet}); + + open(DIST_CONF, "<", "$conf") + or clean_exit("could not open $conf for reading: $!"); + my @dist_var_conf = <DIST_CONF>; + close(DIST_CONF); + + foreach $_ (join_multilines(\@dist_var_conf)) { + if (/$VAR_REGEXP/i && !exists($old_vars{lc($1)})) { + my ($varname, $varval) = (lc($1), $2); + if (exists($new_vars{$varname})) { + warn("\nWARNING: new variable \"$varname\" is defined multiple ". + "times in downloaded files\n"); + } + s/^\s*//; + push(@{$$ch_ref{new_vars}}, "$_\n"); + $new_vars{$varname} = $varval; + $num_new++; + } + } + + close(DIST_CONF); + print STDERR "$num_new new found.\n" + unless ($config{quiet}); + } + } + } +} + + + +# Add new variables to local snort.conf. +sub add_new_vars($ $) +{ + my $ch_ref = shift; + my $varfile = shift; + my $tmp_varfile = "$tmpdir/tmp_varfile.conf"; + my $new_content; + + return unless ($#{$changes{new_vars}} > -1); + + print STDERR "Adding new variables to $varfile... " + unless ($config{quiet}); + + open(OLD_LOCAL_CONF, "<", "$varfile") + or clean_exit("could not open $varfile for reading: $!"); + my @old_content = <OLD_LOCAL_CONF>; + close(OLD_LOCAL_CONF); + + open(NEW_LOCAL_CONF, ">", "$tmp_varfile") + or clean_exit("could not open $tmp_varfile for writing: $!"); + + my @old_vars = grep(/$VAR_REGEXP/i, @old_content); + + + # If any vars exist in old file, put new vars right after them. + if ($#old_vars > -1) { + while ($_ = shift(@old_content)) { + print NEW_LOCAL_CONF $_; + last if ($_ eq $old_vars[$#old_vars]); + } + } + + print NEW_LOCAL_CONF @{$changes{new_vars}}; + print NEW_LOCAL_CONF @old_content; + + close(NEW_LOCAL_CONF); + + clean_exit("could not copy $tmp_varfile to $varfile: $!") + unless (copy("$tmp_varfile", "$varfile")); + + print STDERR "done.\n" + unless ($config{quiet}); +} + + + +# Convert msdos style path to cygwin style, e.g. +# c:\foo => /cygdrive/c/foo +sub msdos_to_cygwin_path($) +{ + my $path_ref = shift; + + if ($$path_ref =~ /^([a-zA-Z]):[\/\\](.*)/) { + my ($drive, $dir) = ($1, $2); + $dir =~ s/\\/\//g; + $$path_ref = "/cygdrive/$drive/$dir"; + return (1); + } + + return (0); +} + + + +# Parse and process a modifysid expression. +# Return 1 if valid, or otherwise 0. +sub parse_mod_expr($ $ $ $) +{ + my $mod_list_ref = shift; # where to store valid entries + my $sid_arg_list = shift; # comma-separated list of SIDs/files or wildcard + my $subst = shift; # regexp to look for + my $repl = shift; # regexp to replace it with + + my @tmp_mod_list; + + $sid_arg_list =~ s/\s+$//; + + foreach my $sid_arg (split(/\s*,\s*/, $sid_arg_list)) { + my $type = ""; + + $type = "sid" if ($sid_arg =~ /^\d+$/); + $type = "file" if ($sid_arg =~ /^\S+.*\.\S+$/); + $type = "wildcard" if ($sid_arg eq "*"); + + return (0) unless ($type); + + # Sanity check to make sure user escaped at least all the "$" in $subst. + if ($subst =~ /[^\\]\$./ || $subst =~ /^\$/) { + warn("WARNING: unescaped \$ in expression \"$subst\", all special ". + "characters must be escaped\n"); + return (0); + } + + # Only allow backreference variables. The check should at least catch some user typos. + if (($repl =~ /[^\\]\$(\D.)/ && $1 !~ /{\d/) || $repl =~ /[^\\]\$$/ + || ($repl =~ /^\$(\D.)/ && $1 !~ /{\d/)) { + warn("WARNING: illegal replacement expression \"$repl\": unescaped \$ ". + "that isn't a backreference\n"); + return (0); + } + + # Don't permit unescaped @. + if ($repl =~ /[^\\]\@/ || $repl =~ /^\@/) { + warn("WARNING: illegal replacement expression \"$repl\": unescaped \@\n"); + return (0); + } + + # Make sure the regexp is valid. + my $repl_qq = "qq/$repl/"; + my $dummy = "foo"; + + eval { + $dummy =~ s/$subst/$repl_qq/ee; + }; + + # We should probably check for warnings as well as errors... + if ($@) { + warn("Invalid regexp: $@"); + return (0); + } + + push(@tmp_mod_list, [$subst, $repl_qq, $type, $sid_arg]); + } + + # If we come this far, all sids and the regexp were parsed successfully, so + # append them to real mod list array. + foreach my $mod_entry (@tmp_mod_list) { + push(@$mod_list_ref, $mod_entry); + } + + return (1); +} + + + +# Untaint a path. Die if it contains illegal chars. +sub untaint_path($) +{ + my $path = shift; + my $orig_path = $path; + + return $path unless ($config{use_path_checks}); + + (($path) = $path =~ /^([$OK_PATH_CHARS]+)$/) + or clean_exit("illegal character in path/filename ". + "\"$orig_path\", allowed are $OK_PATH_CHARS\n". + "Fix this or set use_path_checks=0 in oinkmaster.conf ". + "to disable this check completely if it is too strict.\n"); + + return ($path); +} + + + +# Ask user to approve changes. Return 1 for yes, 0 for no. +sub approve_changes() +{ + my $answer = ""; + + while ($answer !~ /^[yn]/i) { + print "Do you approve these changes? [Yn] "; + $answer = <STDIN>; + $answer = "y" unless ($answer =~ /\S/); + } + + return ($answer =~ /^y/i); +} + + + +# Remove common leading and trailing stuff from two rules. +sub minimize_diff($ $) +{ + my $old_rule = shift; + my $new_rule = shift; + + my $original_old = $old_rule; + my $original_new = $new_rule; + + # Additional chars to print next to the diffing part. + my $additional_chars = 20; + + # Remove the rev keyword from the rules, as it often + # makes the whole diff minimizing useless. + $old_rule =~ s/\s*\b(rev\s*:\s*\d+\s*;)\s*//; + my $old_rev = $1; + + $new_rule =~ s/\s*\b(rev\s*:\s*\d+\s*;)\s*//; + my $new_rev = $1; + + # If rev was the only thing that changed, we want to restore the rev + # before continuing so we don't remove common stuff from rules that + # are identical. + if ($old_rule eq $new_rule) { + $old_rule = $original_old; + $new_rule = $original_new; + } + + # Temporarily remove possible leading # so it works nicely + # with modified rules that are also being either enabled or disabled. + my $old_is_disabled = 0; + my $new_is_disabled = 0; + + $old_is_disabled = 1 if ($old_rule =~ s/^#//); + $new_is_disabled = 1 if ($new_rule =~ s/^#//); + + # Go forward char by char until they aren't equeal. + # $i will bet set to the index where they diff. + my @old = split(//, $old_rule); + my @new = split(//, $new_rule); + + my $i = 0; + while ($i <= $#old && $i <= $#new && $old[$i] eq $new[$i]) { + $i++; + } + + # Now same thing but backwards. + # $j will bet set to the index where they diff. + @old = reverse(split(//, $old_rule)); + @new = reverse(split(//, $new_rule)); + + my $j = 0; + while ($j <= $#old && $j <= $#new && $old[$j] eq $new[$j]) { + $j++; + } + + # Print some additional chars on either side, if there is room for it. + $i -= $additional_chars; + $i = 0 if ($i < 0); + + $j = -$j + $additional_chars; + $j = 0 if ($j > -1); + + my ($old, $new); + + # Print entire rules (i.e. they can not be shortened). + if (!$i && !$j) { + $old = $old_rule; + $new = $new_rule; + + # Leading and trailing stuff can be removed. + } elsif ($i && $j) { + $old = "..." . substr($old_rule, $i, $j) . "..."; + $new = "..." . substr($new_rule, $i, $j) . "..."; + + # Trailing stuff can be removed. + } elsif (!$i && $j) { + $old = substr($old_rule, $i, $j) . "..."; + $new = substr($new_rule, $i, $j) . "..."; + + # Leading stuff can be removed. + } elsif ($i && !$j) { + $old = "..." . substr($old_rule, $i); + $new = "..." . substr($new_rule, $i); + } + + chomp($old, $new); + $old .= "\n"; + $new .= "\n"; + + # Restore possible leading # now. + $old = "#$old" if ($old_is_disabled); + $new = "#$new" if ($new_is_disabled); + + return ($old, $new); +} + + + +# Check a string and return 1 if it's a valid single-line snort rule. +# Msg string is put in second arg, sid in third (those are the only +# required keywords, besides the leading rule actions). +sub parse_singleline_rule($ $ $) +{ + my $line = shift; + my $msg_ref = shift; + my $sid_ref = shift; + + undef($$msg_ref); + undef($$sid_ref); + + if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) { + + if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) { + $$msg_ref = $1; + } else { + return (0); + } + + if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) { + $$sid_ref = $1; + } else { + return (0); + } + + return (1); + } + + return (0); +} + + + +# Merge multiline directives in an array by simply removing traling backslashes. +sub join_multilines($) +{ + my $multiline_conf_ref = shift; + my $joined_conf = ""; + + foreach $_ (@$multiline_conf_ref) { + s/\\\s*\n$//; + $joined_conf .= $_; + } + + return (split/\n/, $joined_conf); +} + + + +# Catch SIGINT. +sub catch_sigint() +{ + $SIG{INT} = 'IGNORE'; + print STDERR "\nInterrupted, cleaning up.\n"; + sleep(1); + clean_exit("interrupted by signal"); +} + + + +# Remove temporary directory and exit. +# If a non-empty string is given as argument, it will be regarded +# as an error message and we will use die() with the message instead +# of just exit(0). +sub clean_exit($) +{ + my $err_msg = shift; + + $SIG{INT} = 'DEFAULT'; + + if (defined($tmpdir) && -d "$tmpdir") { + chdir(File::Spec->rootdir()); + rmtree("$tmpdir", 0, 1); + undef($tmpdir); + } + + if (!defined($err_msg) || $err_msg eq "") { + exit(0); + } else { + chomp($err_msg); + die("\n$0: Error: $err_msg\n\nOink, oink. Exiting...\n"); + } +} + + + +#### EOF #### diff --git a/config/snort-old/bin/snort2c b/config/snort-old/bin/snort2c Binary files differnew file mode 100755 index 00000000..fdc91ac8 --- /dev/null +++ b/config/snort-old/bin/snort2c |