diff options
Diffstat (limited to 'config/snort-old/bin/oinkmaster_contrib/addsid.pl')
| -rw-r--r-- | config/snort-old/bin/oinkmaster_contrib/addsid.pl | 382 |
1 files changed, 0 insertions, 382 deletions
diff --git a/config/snort-old/bin/oinkmaster_contrib/addsid.pl b/config/snort-old/bin/oinkmaster_contrib/addsid.pl deleted file mode 100644 index 64255d22..00000000 --- a/config/snort-old/bin/oinkmaster_contrib/addsid.pl +++ /dev/null @@ -1,382 +0,0 @@ -#!/usr/bin/perl -w - -# $Id: addsid.pl,v 1.30 2005/12/31 13:42:46 andreas_o Exp $ # - -# Copyright (c) 2004-2006 Andreas Östling <andreaso@it.su.se> -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or -# without modification, are permitted provided that the following -# conditions are met: -# -# 1. Redistributions of source code must retain the above -# copyright notice, this list of conditions and the following -# disclaimer. -# -# 2. Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following -# disclaimer in the documentation and/or other materials -# provided with the distribution. -# -# 3. Neither the name of the author nor the names of its -# contributors may be used to endorse or promote products -# derived from this software without specific prior written -# permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND -# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, -# INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR -# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, -# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -use strict; - - -sub get_next_entry($ $ $ $ $ $); -sub parse_singleline_rule($ $ $); -sub get_next_available_sid(@); - - -# Set this to the default classtype you want to add, if missing. -# Set to 0 or "" if you don't want to add a classtype. -my $CLASSTYPE = "misc-attack"; - -# If ADD_REV is set to 1, "rev: 1;" will be added to rule if it has no rev. -# Set to 0 if you don't want to add it. -my $ADD_REV = 1; - -# Minimum SID to add. Normally, the next available SID will be used, -# unless it's below this value. Only SIDs >= 1000000 are reserved for -# personal use. -my $MIN_SID = 1000001; - -# Regexp to match the start of a multi-line rule. -# %ACTIONS% will be replaced with content of $config{actions} later. -my $MULTILINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. - '\s.*\\\\\s*\n$'; # '; - -# Regexp to match a single-line rule. -my $SINGLELINE_RULE_REGEXP = '^\s*#*\s*(?:%ACTIONS%)'. - '\s.+;\s*\)\s*$'; # '; - - -my $USAGE = << "RTFM"; - -Parse *.rules in one or more directories and add "sid:<sid>;" to -active rules that don't have any "sid" entry, starting with the next -available SID after parsing all rules files (but $MIN_SID at minumum). -Also, "rev:1;" is added to rules without a "rev" entry, and -"classtype:misc-attack;" is added to rules without a "classtype" entry -(edit options at the top of $0 if you want to change this). - -Usage: $0 <rulesdir> [rulesdir2, ...] - -RTFM - - -# Start in verbose mode. -my $verbose = 1; - -my (%all_sids, %active_sids, %config); - -my @rulesdirs = @ARGV; - -die($USAGE) unless ($#rulesdirs > -1); - -$config{rule_actions} = "alert|drop|log|pass|reject|sdrop|activate|dynamic"; - -$SINGLELINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; -$MULTILINE_RULE_REGEXP =~ s/%ACTIONS%/$config{rule_actions}/; - - -# Find out the next available SID. -my $next_sid = get_next_available_sid(@rulesdirs); - -# Avoid seeing possible warnings about broken rules twice. -$verbose = 0; - -# Add sid/rev/classtype to active rules that don't have any. -foreach my $dir (@rulesdirs) { - opendir(RULESDIR, "$dir") or die("could not open \"$dir\": $!\n"); - - while (my $file = readdir(RULESDIR)) { - next unless ($file =~ /\.rules$/); - - open(OLDFILE, "$dir/$file") - or die("could not open \"$dir/$file\": $!\n"); - my @file = <OLDFILE>; - close(OLDFILE); - - open(NEWFILE, ">", "$dir/$file") - or die("could not open \"$dir/$file\" for writing: $!\n"); - - my ($single, $multi, $nonrule, $msg, $sid); - while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { - - if (defined($nonrule)) { - print NEWFILE "$nonrule"; - next; - } - - $multi = $single unless (defined($multi)); - - # Don't care about inactive rules. - if ($single =~ /^\s*#/) { - print NEWFILE "$multi"; - next; - } - - my $added; - - # Add SID. - if ($single !~ /sid\s*:\s*\d+\s*;/) { - $added .= "SID $next_sid,"; - $multi =~ s/\)\s*\n/sid:$next_sid;)\n/; - $next_sid++; - } - - # Add revision. - if ($ADD_REV && $single !~ /rev\s*:\s*\d+\s*;/) { - $added .= "rev,"; - $multi =~ s/\)\s*\n/rev:1;)\n/; - } - - # Add classtype. - if ($CLASSTYPE && $single !~ /classtype\s*:\s*.+\s*;/) { - $added .= "classtype $CLASSTYPE,"; - $multi =~ s/\)\s*\n/classtype:$CLASSTYPE;)\n/; - } - - if (defined($added)) { - $added =~ s/,$//; - print "Adding $added to rule \"$msg\"\n" - if (defined($added)); - } - - print NEWFILE "$multi"; - } - - close(NEWFILE); - } - - closedir(RULESDIR); -} - - - -# Read in *.rules in given directory and return highest SID. -sub get_next_available_sid(@) -{ - my @dirs = @_; - - foreach my $dir (@dirs) { - opendir(RULESDIR, "$dir") or die("could not open \"$dir\": $!\n"); - - # Only care about *.rules. - while (my $file = readdir(RULESDIR)) { - next unless ($file =~ /\.rules$/); - - open(OLDFILE, "<$dir/$file") or die("could not open \"$dir/$file\": $!\n"); - my @file = <OLDFILE>; - close(OLDFILE); - - my ($single, $multi, $nonrule, $msg, $sid); - - while (get_next_entry(\@file, \$single, \$multi, \$nonrule, \$msg, \$sid)) { - if (defined($single) && defined($sid)) { - $all_sids{$sid}++; - - # If this is an active rule add to %active_sids and - # warn if it already exists. - if ($single =~ /^\s*alert/) { - print STDERR "WARNING: duplicate SID: $sid\n" - if (exists($active_sids{$sid})); - $active_sids{$sid}++ - } - } - } - } - } - - # Sort sids and use highest one + 1, unless it's below MIN_SID. - @_ = sort {$a <=> $b} keys(%all_sids); - my $sid = pop(@_); - - if (!defined($sid)) { - $sid = $MIN_SID - } else { - $sid++; - } - - # If it's below MIN_SID, use MIN_SID instead. - $sid = $MIN_SID if ($sid < $MIN_SID); - - return ($sid) -} - - - -sub get_next_entry($ $ $ $ $ $) -{ - my $arr_ref = shift; - my $single_ref = shift; - my $multi_ref = shift; - my $nonrule_ref = shift; - my $msg_ref = shift; - my $sid_ref = shift; - - undef($$single_ref); - undef($$multi_ref); - undef($$nonrule_ref); - undef($$msg_ref); - undef($$sid_ref); - - my $line = shift(@$arr_ref) || return(0); - my $disabled = 0; - my $broken = 0; - - # Possible beginning of multi-line rule? - if ($line =~ /$MULTILINE_RULE_REGEXP/oi) { - $$single_ref = $line; - $$multi_ref = $line; - - $disabled = 1 if ($line =~ /^\s*#/); - - # Keep on reading as long as line ends with "\". - while (!$broken && $line =~ /\\\s*\n$/) { - - # Remove trailing "\" and newline for single-line version. - $$single_ref =~ s/\\\s*\n//; - - # If there are no more lines, this can not be a valid multi-line rule. - if (!($line = shift(@$arr_ref))) { - - warn("\nWARNING: got EOF while parsing multi-line rule: $$multi_ref\n") - if ($config{verbose}); - - @_ = split(/\n/, $$multi_ref); - - undef($$multi_ref); - undef($$single_ref); - - # First line of broken multi-line rule will be returned as a non-rule line. - $$nonrule_ref = shift(@_) . "\n"; - $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces - - # The rest is put back to the array again. - foreach $_ (reverse((@_))) { - unshift(@$arr_ref, "$_\n"); - } - - return (1); # return non-rule - } - - # Multi-line continuation. - $$multi_ref .= $line; - - # If there are non-comment lines in the middle of a disabled rule, - # mark the rule as broken to return as non-rule lines. - if ($line !~ /^\s*#/ && $disabled) { - $broken = 1; - } elsif ($line =~ /^\s*#/ && !$disabled) { - # comment line (with trailing slash) in the middle of an active rule - ignore it - } else { - $line =~ s/^\s*#*\s*//; # remove leading # in single-line version - $$single_ref .= $line; - } - - } # while line ends with "\" - - # Single-line version should now be a valid rule. - # If not, it wasn't a valid multi-line rule after all. - if (!$broken && parse_singleline_rule($$single_ref, $msg_ref, $sid_ref)) { - - $$single_ref =~ s/^\s*//; # remove leading whitespaces - $$single_ref =~ s/^#+\s*/#/; # remove whitespaces next to leading # - $$single_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces - - $$multi_ref =~ s/^\s*//; - $$multi_ref =~ s/\s*\n$/\n/; - $$multi_ref =~ s/^#+\s*/#/; - - return (1); # return multi - } else { - warn("\nWARNING: invalid multi-line rule: $$single_ref\n") - if ($config{verbose} && $$multi_ref !~ /^\s*#/); - - @_ = split(/\n/, $$multi_ref); - - undef($$multi_ref); - undef($$single_ref); - - # First line of broken multi-line rule will be returned as a non-rule line. - $$nonrule_ref = shift(@_) . "\n"; - $$nonrule_ref =~ s/\s*\n$/\n/; # remove trailing whitespaces - - # The rest is put back to the array again. - foreach $_ (reverse((@_))) { - unshift(@$arr_ref, "$_\n"); - } - - return (1); # return non-rule - } - } elsif (parse_singleline_rule($line, $msg_ref, $sid_ref)) { - $$single_ref = $line; - $$single_ref =~ s/^\s*//; - $$single_ref =~ s/^#+\s*/#/; - $$single_ref =~ s/\s*\n$/\n/; - - return (1); # return single - } else { # non-rule line - - # Do extra check and warn if it *might* be a rule anyway, - # but that we just couldn't parse for some reason. - warn("\nWARNING: line may be a rule but it could not be parsed ". - "(missing sid or msg?): $line\n") - if ($config{verbose} && $line =~ /^\s*alert .+msg\s*:\s*".+"\s*;/); - - $$nonrule_ref = $line; - $$nonrule_ref =~ s/\s*\n$/\n/; - - return (1); # return non-rule - } -} - - - -# From oinkmaster.pl except that this version -# has been modified so that the sid is *optional*. -sub parse_singleline_rule($ $ $) -{ - my $line = shift; - my $msg_ref = shift; - my $sid_ref = shift; - - if ($line =~ /$SINGLELINE_RULE_REGEXP/oi) { - - if ($line =~ /\bmsg\s*:\s*"(.+?)"\s*;/i) { - $$msg_ref = $1; - } else { - return (0); - } - - if ($line =~ /\bsid\s*:\s*(\d+)\s*;/i) { - $$sid_ref = $1; -# } else { -# return (0); - } - - return (1); - } - - return (0); -} |