diff options
Diffstat (limited to 'config/olsrd.inc')
| -rw-r--r-- | config/olsrd.inc | 291 |
1 files changed, 0 insertions, 291 deletions
diff --git a/config/olsrd.inc b/config/olsrd.inc deleted file mode 100644 index 9eee0196..00000000 --- a/config/olsrd.inc +++ /dev/null @@ -1,291 +0,0 @@ -<?php -/* COPYRIGHT */ - -require_once("config.inc"); - -function setup_wireless_olsr() { - global $config, $g; - - if ($g['platform'] == 'jail' || !$config['installedpackages']['olsrd'] || !$config['installedpackages']) - return; - if(isset($config['system']['developerspew'])) { - $mt = microtime(); - echo "setup_wireless_olsr($interface) being called $mt\n"; - } - conf_mount_rw(); - - foreach($config['installedpackages']['olsrd']['config'] as $olsrd) { - $olsr_enable = $olsrd['enable']; - if ($olsr_enable <> "on") { - if (is_process_running("olsrd")) - mwexec("/usr/bin/killall olsrd", true); - return; - } - $fd = fopen("{$g['varetc_path']}/olsr.conf", "w"); - - if($olsrd['announcedynamicroute'] or $olsrd['enableannounce'] == "on") { - $enableannounce .= "\nHna4\n"; - $enableannounce .= "{\n"; - if($olsrd['announcedynamicroute']) - $enableannounce .= "\t{$olsrd['announcedynamicroute']}\n"; - if($olsrd['enableannounce'] == "on") - $enableannounce .= "0.0.0.0 0.0.0.0"; - $enableannounce .= "\n}\n"; - } else { - $enableannounce = ""; - } - - $olsr .= <<<EODA -# -# olsr.org OLSR daemon config file -# -# Lines starting with a # are discarded -# -# This file was generated by setup_wireless_olsr() in services.inc -# - -# This file is an example of a typical -# configuration for a mostly static -# network(regarding mobility) using -# the LQ extention - -# Debug level(0-9) -# If set to 0 the daemon runs in the background - -DebugLevel 2 - -# IP version to use (4 or 6) - -IpVersion 4 - -# Clear the screen each time the internal state changes - -ClearScreen yes - -{$enableannounce} - -# Should olsrd keep on running even if there are -# no interfaces available? This is a good idea -# for a PCMCIA/USB hotswap environment. -# "yes" OR "no" - -AllowNoInt yes - -# TOS(type of service) value for -# the IP header of control traffic. -# If not set it will default to 16 - -#TosValue 16 - -# The fixed willingness to use(0-7) -# If not set willingness will be calculated -# dynamically based on battery/power status -# if such information is available - -#Willingness 4 - -# Allow processes like the GUI front-end -# to connect to the daemon. - -IpcConnect -{ - # Determines how many simultaneously - # IPC connections that will be allowed - # Setting this to 0 disables IPC - - MaxConnections 0 - - # By default only 127.0.0.1 is allowed - # to connect. Here allowed hosts can - # be added - - Host 127.0.0.1 - #Host 10.0.0.5 - - # You can also specify entire net-ranges - # that are allowed to connect. Multiple - # entries are allowed - - #Net 192.168.1.0 255.255.255.0 -} - -# Wether to use hysteresis or not -# Hysteresis adds more robustness to the -# link sensing but delays neighbor registration. -# Used by default. 'yes' or 'no' - -UseHysteresis no - -# Hysteresis parameters -# Do not alter these unless you know -# what you are doing! -# Set to auto by default. Allowed -# values are floating point values -# in the interval 0,1 -# THR_LOW must always be lower than -# THR_HIGH. - -#HystScaling 0.50 -#HystThrHigh 0.80 -#HystThrLow 0.30 - - -# Link quality level -# 0 = do not use link quality -# 1 = use link quality for MPR selection -# 2 = use link quality for MPR selection and routing -# Defaults to 0 - -LinkQualityLevel {$olsrd['enablelqe']} - -# Polling rate in seconds(float). -# Default value 0.05 sec - -Pollrate 0.05 - - -# TC redundancy -# Specifies how much neighbor info should -# be sent in TC messages -# Possible values are: -# 0 - only send MPR selectors -# 1 - send MPR selectors and MPRs -# 2 - send all neighbors -# -# defaults to 0 - -TcRedundancy 2 - -# -# MPR coverage -# Specifies how many MPRs a node should -# try select to reach every 2 hop neighbor -# -# Can be set to any integer >0 -# -# defaults to 1 - -MprCoverage 3 - -# Example plugin entry with parameters: - -EODA; - -if($olsrd['enablehttpinfo'] == "on") { - $olsr .= <<<EODB - -LoadPlugin "/usr/local/lib/olsrd_httpinfo.so.0.1" -{ - PlParam "port" "{$olsrd['port']}" - PlParam "Net" "{$olsrd['allowedhttpinfohost']} {$olsrd['allowedhttpinfosubnet']}" -} - -EODB; - -} - -if($olsrd['enabledsecure'] == "on") { - @file_put_contents("{$g['tmp_path']}/olsrkey.txt", $olsrd['securekey']); - $olsr .= <<<EODC - -LoadPlugin "/usr/local/lib/olsrd_secure.so.0.5" -{ - PlParam "Keyfile" "{$g['tmp_path']}/olsrkey.txt" -} - -EODC; - -} - -if($olsrd['enabledyngw'] == "on") { - - /* unset default route, olsr auto negotiates */ - mwexec("/sbin/route delete default"); - - $olsr .= <<<EODE - -LoadPlugin "/usr/local/lib/olsrd_dyn_gw.so.0.4" -{ - # how often to look for a inet gw, in seconds - # defaults to 5 secs, if commented out - PlParam "Interval" "{$olsrd['polling']}" - - # if one or more IPv4 addresses are given, do a ping on these in - # descending order to validate that there is not only an entry in - # routing table, but also a real internet connection. If any of - # these addresses could be pinged successfully, the test was - # succesful, i.e. if the ping on the 1st address was successful,the - # 2nd won't be pinged - PlParam "Ping" "{$olsrd['ping']}" - #PlParam "HNA" "192.168.81.0 255.255.255.0" -} - -EODE; - -} - -foreach($config['installedpackages']['olsrd']['config'] as $conf) { - $interfaces = explode(',', $conf['iface_array']); - foreach($interfaces as $interface) { - $realinterface = convert_friendly_interface_to_real_interface_name($interface); -$olsr .= <<<EODAD -Interface "{$realinterface}" -{ - - # Hello interval in seconds(float) - HelloInterval 2.0 - - # HELLO validity time - HelloValidityTime 20.0 - - # TC interval in seconds(float) - TcInterval 5.0 - - # TC validity time - TcValidityTime 30.0 - - # MID interval in seconds(float) - MidInterval 5.0 - - # MID validity time - MidValidityTime 30.0 - - # HNA interval in seconds(float) - HnaInterval 5.0 - - # HNA validity time - HnaValidityTime 30.0 - - # When multiple links exist between hosts - # the weight of interface is used to determine - # the link to use. Normally the weight is - # automatically calculated by olsrd based - # on the characteristics of the interface, - # but here you can specify a fixed value. - # Olsrd will choose links with the lowest value. - - # Weight 0 - - -} - -EODAD; - - } - break; -} - fwrite($fd, $olsr); - fclose($fd); - } - - if (is_process_running("olsrd")) - mwexec("/usr/bin/killall olsrd", true); - - sleep(2); - - mwexec_bg("/usr/local/sbin/olsrd -f {$g['varetc_path']}/olsr.conf"); - - conf_mount_ro(); -} - -?> |