diff options
Diffstat (limited to 'config/freeradius2')
| -rw-r--r--[-rwxr-xr-x] | config/freeradius2/freeradius.inc | 855 | ||||
| -rw-r--r-- | config/freeradius2/freeradius.xml | 73 | ||||
| -rwxr-xr-x[-rw-r--r--] | config/freeradius2/freeradiussettings.xml | 0 | ||||
| -rw-r--r-- | config/freeradius2/freeradiussqlconf.xml | 2 |
4 files changed, 824 insertions, 106 deletions
diff --git a/config/freeradius2/freeradius.inc b/config/freeradius2/freeradius.inc index 0cf53eb8..a3558cea 100755..100644 --- a/config/freeradius2/freeradius.inc +++ b/config/freeradius2/freeradius.inc @@ -46,33 +46,40 @@ function freeradius_settings_resync() { global $config; $conf = ''; - // Definition variables for freeradiussettings $varsettings = $config['installedpackages']['freeradiussettings']['config'][0]; - $varsettingsmaxrequesttime = $varsettings['varsettingsmaxrequesttime']; - $varsettingscleanupdelay = $varsettings['varsettingscleanupdelay']; - $varsettingsmaxrequests = $varsettings['varsettingsmaxrequests']; - $varsettingslogdir = $varsettings['varsettingslogdir']; - $varsettingsstrippednames = $varsettings['varsettingsstrippednames']; - $varsettingsauth = $varsettings['varsettingsauth']; - $varsettingsauthbadpass = $varsettings['varsettingsauthbadpass']; - $varsettingsauthgoodpass = $varsettings['varsettingsauthgoodpass']; - $varsettingshostnamelookups = $varsettings['varsettingshostnamelookups']; - $varsettingsallowcoredumps = $varsettings['varsettingsallowcoredumps']; - $varsettingsregularexpressions = $varsettings['varsettingsregularexpressions']; - $varsettingsextendedexpressions = $varsettings['varsettingsextendedexpressions']; - $varsettingsmaxattributes = $varsettings['varsettingsmaxattributes']; - $varsettingsrejectdelay = $varsettings['varsettingsrejectdelay']; - $varsettingsstartservers = $varsettings['varsettingsstartservers']; - $varsettingsmaxservers = $varsettings['varsettingsmaxservers']; - $varsettingsminspareservers = $varsettings['varsettingsminspareservers']; - $varsettingsmaxspareservers = $varsettings['varsettingsmaxspareservers']; - $varsettingsmaxqueuesize = $varsettings['varsettingsmaxqueuesize']; - $varsettingsmaxrequestsperserver = $varsettings['varsettingsmaxrequestsperserver']; + + // Variables: General configuration + $varsettingsmaxrequesttime = ($varsettings['varsettingsmaxrequesttime']?$varsettings['varsettingsmaxrequesttime']:'1024'); + $varsettingscleanupdelay = ($varsettings['varsettingscleanupdelay']?$varsettings['varsettingscleanupdelay']:'30'); + $varsettingsmaxrequests = ($varsettings['varsettingsmaxrequests']?$varsettings['varsettingsmaxrequests']:'5'); + $varsettingslogdir = ($varsettings['varsettingslogdir']?$varsettings['varsettingslogdir']:'no'); + $varsettingsstrippednames = ($varsettings['varsettingsstrippednames']?$varsettings['varsettingsstrippednames']:'no'); + + // Variables: Logging options + $varsettingsauth = ($varsettings['varsettingsauth']?$varsettings['varsettingsauth']:'yes'); + $varsettingsauthbadpass = ($varsettings['varsettingsauthbadpass']?$varsettings['varsettingsauthbadpass']:'yes'); + $varsettingsauthgoodpass = ($varsettings['varsettingsauthgoodpass']?$varsettings['varsettingsauthgoodpass']:'files'); + $varsettingshostnamelookups = ($varsettings['varsettingshostnamelookups']?$varsettings['varsettingshostnamelookups']:'no'); + $varsettingsallowcoredumps = ($varsettings['varsettingsallowcoredumps']?$varsettings['varsettingsallowcoredumps']:'no'); + $varsettingsregularexpressions = ($varsettings['varsettingsregularexpressions']?$varsettings['varsettingsregularexpressions']:'no'); + $varsettingsextendedexpressions = ($varsettings['varsettingsextendedexpressions']?$varsettings['varsettingsextendedexpressions']:'no'); + + // Variables: Security + $varsettingsmaxattributes = ($varsettings['varsettingsmaxattributes']?$varsettings['varsettingsmaxattributes']:'200'); + $varsettingsrejectdelay = ($varsettings['varsettingsrejectdelay']?$varsettings['varsettingsrejectdelay']:'1'); + + // Variables: Thread Pool + $varsettingsstartservers = ($varsettings['varsettingsstartservers']?$varsettings['varsettingsstartservers']:'5'); + $varsettingsmaxservers = ($varsettings['varsettingsmaxservers']?$varsettings['varsettingsmaxservers']:'32'); + $varsettingsminspareservers = ($varsettings['varsettingsminspareservers']?$varsettings['varsettingsminspareservers']:'3'); + $varsettingsmaxspareservers = ($varsettings['varsettingsmaxspareservers']?$varsettings['varsettingsmaxspareservers']:'10'); + $varsettingsmaxqueuesize = ($varsettings['varsettingsmaxqueuesize']?$varsettings['varsettingsmaxqueuesize']:'65536'); + $varsettingsmaxrequestsperserver = ($varsettings['varsettingsmaxrequestsperserver']?$varsettings['varsettingsmaxrequestsperserver']:'0'); // These lines are uncommented in fuction "freeradius_settings_resync" to INCLUDE / enable eap.conf $sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0]; - $varsqlconfenable = $sqlconf['varsqlconfenable']; - $varsqlconfenablecounter = $sqlconf['varsqlconfenablecounter']; + $varsqlconfenable = ($sqlconf['varsqlconfenable']?$sqlconf['varsqlconfenable']:'#\$INCLUDE sql.conf'); + $varsqlconfenablecounter = ($sqlconf['varsqlconfenablecounter']?$sqlconf['varsqlconfenablecounter']:'#\$INCLUDE sql/mysql/counter.conf'); @@ -114,28 +121,60 @@ regular_expressions = $varsettingsregularexpressions extended_expressions = $varsettingsextendedexpressions EOD; - +// This activates virtual-server coa. +// A better way would be if this link would only be created if there is an interface type "coa" +// and if deleted the link will be deleted, too +exec("ln -s /usr/local/etc/raddb/sites-available/coa /usr/local/etc/raddb/sites-enabled/"); $arrinterfaces = $config['installedpackages']['freeradiusinterfaces']['config']; - if (is_array($arrinterfaces)) { + if (is_array($arrinterfaces) && !empty($arrinterfaces)) { foreach ($arrinterfaces as $item) { $varinterfaceip = $item['varinterfaceip']; $varinterfaceport = $item['varinterfaceport']; $varinterfacetype = $item['varinterfacetype']; $varinterfaceipversion = $item['varinterfaceipversion']; - $conf .= <<<EOD + // Begin "if" for interface-type = detail + if ($item['varinterfacetype'] == 'detail') { + $conf .= <<<EOD listen { type = $varinterfacetype $varinterfaceipversion = $varinterfaceip port = $varinterfaceport - ### the following two lines are only neccessary for interface type detail - filename = ${radacctdir}/detail + filename = \${radacctdir}/detail-%Y%m%d:%H load_factor = 10 } EOD; + } // End "if" for interface-type = detail + + // Begin "if" for interface-type = coa + if ($item['varinterfacetype'] == 'coa') { + $conf .= <<<EOD +listen { + type = $varinterfacetype + $varinterfaceipversion = $varinterfaceip + port = $varinterfaceport + server = coa +} + +EOD; + } // End "if" for interface-type = detail + + // Begin "if" for interface-type = auth, acct, proxy, status + if (($item['varinterfacetype'] == 'auth') || ($item['varinterfacetype'] == 'acct') || ($item['varinterfacetype'] == 'proxy') || ($item['varinterfacetype'] == 'status')) { + $conf .= <<<EOD +listen { + type = $varinterfacetype + $varinterfaceipversion = $varinterfaceip + port = $varinterfaceport +} + +EOD; + } // End "if" for interface-type = auth, acct, proxy, status } // end foreach - } // end if + } // end if array + + $conf .= <<<EOD log { @@ -154,7 +193,7 @@ checkrad = \${sbindir}/checkrad security { max_attributes = $varsettingsmaxattributes reject_delay = $varsettingsrejectdelay - status_server = no ### Needs additional config in raddb/sites-available/status + status_server = yes } ### disbale proxy module. In most environments we do not need to proxy requests to another RADIUS PROXY server @@ -218,6 +257,9 @@ global $config; $conf = ''; $users = $config['installedpackages']['freeradius']['config']; + +$usersoutput = $config['installedpackages']['freeradius']['config'][0]['usersoutput']=base64_encode(file_get_contents('/usr/local/etc/raddb/users')); + if (is_array($users)) { foreach ($users as $user) { $username = $user['username']; @@ -353,32 +395,32 @@ function freeradius_eapconf_resync() { $eapconf = $config['installedpackages']['freeradiuseapconf']['config'][0]; // Variables: EAP - $vareapconfdefaulteaptype = $eapconf['vareapconfdefaulteaptype']; - $vareapconftimerexpire = $eapconf['vareapconftimerexpire']; - $vareapconfignoreunknowneaptypes = $eapconf['vareapconfignoreunknowneaptypes']; - $vareapconfciscoaccountingusernamebug = $eapconf['vareapconfciscoaccountingusernamebug']; - $vareapconfmaxsessions = $eapconf['vareapconfmaxsessions']; + $vareapconfdefaulteaptype = ($eapconf['vareapconfdefaulteaptype']?$eapconf['vareapconfdefaulteaptype']:'md5'); + $vareapconftimerexpire = ($eapconf['vareapconftimerexpire']?$eapconf['vareapconftimerexpire']:'60'); + $vareapconfignoreunknowneaptypes = ($eapconf['vareapconfignoreunknowneaptypes']?$eapconf['vareapconfignoreunknowneaptypes']:'no'); + $vareapconfciscoaccountingusernamebug = ($eapconf['vareapconfciscoaccountingusernamebug']?$eapconf['vareapconfciscoaccountingusernamebug']:'no'); + $vareapconfmaxsessions = ($eapconf['vareapconfmaxsessions']?$eapconf['vareapconfmaxsessions']:'4096'); // Variables: EAP-TLS and EAP-TLS with OCSP support - $vareapconfprivatekeypassword = $eapconf['vareapconfprivatekeypassword']; - $vareapconfprivatekeyfile = $eapconf['vareapconfprivatekeyfile']; - $vareapconfcertificatefile = $eapconf['vareapconfcertificatefile']; - $vareapconfcafile = $eapconf['vareapconfcafile']; - $vareapconfdhfile = $eapconf['vareapconfdhfile']; - $vareapconfrandomfile = $eapconf['vareapconfrandomfile']; - $vareapconfocspenable = $eapconf['vareapconfocspenable']; - $vareapconfocspoverridecerturl = $eapconf['vareapconfocspoverridecerturl']; - $vareapconfocspurl = $eapconf['vareapconfocspurl']; + $vareapconfprivatekeypassword = ($eapconf['vareapconfprivatekeypassword']?$eapconf['vareapconfprivatekeypassword']:'whatever'); + $vareapconfprivatekeyfile = ($eapconf['vareapconfprivatekeyfile']?$eapconf['vareapconfprivatekeyfile']:'server.pem'); + $vareapconfcertificatefile = ($eapconf['vareapconfcertificatefile']?$eapconf['vareapconfcertificatefile']:'server.pem'); + $vareapconfcafile = ($eapconf['vareapconfcafile']?$eapconf['vareapconfcafile']:'ca.pem'); + $vareapconfdhfile = ($eapconf['vareapconfdhfile']?$eapconf['vareapconfdhfile']:'dh'); + $vareapconfrandomfile = ($eapconf['vareapconfrandomfile']?$eapconf['vareapconfrandomfile']:'random'); + $vareapconfocspenable = ($eapconf['vareapconfocspenable']?$eapconf['vareapconfocspenable']:'no'); + $vareapconfocspoverridecerturl = ($eapconf['vareapconfocspoverridecerturl']?$eapconf['vareapconfocspoverridecerturl']:'no'); + $vareapconfocspurl = ($eapconf['vareapconfocspurl']?$eapconf['vareapconfocspurl']:'http://127.0.0.1/ocsp/'); // Variables: EAP-TTLS - $vareapconfttlsdefaulteaptype = $eapconf['vareapconfttlsdefaulteaptype']; - $vareapconfttlscopyrequesttotunnel = $eapconf['vareapconfttlscopyrequesttotunnel']; - $vareapconfttlsusetunneledreply = $eapconf['vareapconfttlsusetunneledreply']; + $vareapconfttlsdefaulteaptype = ($eapconf['vareapconfttlsdefaulteaptype']?$eapconf['vareapconfttlsdefaulteaptype']:'md5'); + $vareapconfttlscopyrequesttotunnel = ($eapconf['vareapconfttlscopyrequesttotunnel']?$eapconf['vareapconfttlscopyrequesttotunnel']:'no'); + $vareapconfttlsusetunneledreply = ($eapconf['vareapconfttlsusetunneledreply']?$eapconf['vareapconfttlsusetunneledreply']:'no'); // Variables: EAP-PEAP with MSCHAPv2 - $vareapconfpeapdefaulteaptype = $eapconf['vareapconfpeapdefaulteaptype']; - $vareapconfpeapcopyrequesttotunnel = $eapconf['vareapconfpeapcopyrequesttotunnel']; - $vareapconfpeapusetunneledreply = $eapconf['vareapconfpeapusetunneledreply']; + $vareapconfpeapdefaulteaptype = ($eapconf['vareapconfpeapdefaulteaptype']?$eapconf['vareapconfpeapdefaulteaptype']:'mschapv2'); + $vareapconfpeapcopyrequesttotunnel = ($eapconf['vareapconfpeapcopyrequesttotunnel']?$eapconf['vareapconfpeapcopyrequesttotunnel']:'no'); + $vareapconfpeapusetunneledreply = ($eapconf['vareapconfpeapusetunneledreply']?$eapconf['vareapconfpeapusetunneledreply']:'no'); $conf .= <<<EOD @@ -481,34 +523,34 @@ function freeradius_sqlconf_resync() { $sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0]; // Variables: SQL - $varsqlconfdatabase = $sqlconf['varsqlconfdatabase']; - $varsqlconfserver = $sqlconf['varsqlconfserver']; - $varsqlconfport = $sqlconf['varsqlconfport']; - $varsqlconflogin = $sqlconf['varsqlconflogin']; - $varsqlconfpassword = $sqlconf['varsqlconfpassword']; - $varsqlconfradiusdb = $sqlconf['varsqlconfradiusdb']; - $varsqlconfaccttable1 = $sqlconf['varsqlconfaccttable1']; - $varsqlconfaccttable2 = $sqlconf['varsqlconfaccttable2']; - $varsqlconfpostauthtable = $sqlconf['varsqlconfpostauthtable']; - $varsqlconfauthchecktable = $sqlconf['varsqlconfauthchecktable']; - $varsqlconfauthreplytable = $sqlconf['varsqlconfauthreplytable']; - $varsqlconfgroupchecktable = $sqlconf['varsqlconfgroupchecktable']; - $varsqlconfgroupreplytable = $sqlconf['varsqlconfgroupreplytable']; - $varsqlconfusergrouptable = $sqlconf['varsqlconfusergrouptable']; - $varsqlconfreadgroups = $sqlconf['varsqlconfreadgroups']; - $varsqlconfdeletestalesessions = $sqlconf['varsqlconfdeletestalesessions']; - $varsqlconfsqltrace = $sqlconf['varsqlconfsqltrace']; - $varsqlconfnumsqlsocks = $sqlconf['varsqlconfnumsqlsocks']; - $varsqlconfconnectfailureretrydelay = $sqlconf['varsqlconfconnectfailureretrydelay']; - $varsqlconflifetime = $sqlconf['varsqlconflifetime']; - $varsqlconfmaxqueries = $sqlconf['varsqlconfmaxqueries']; - $varsqlconfreadclients = $sqlconf['varsqlconfreadclients']; - $varsqlconfnastable = $sqlconf['varsqlconfnastable']; + $varsqlconfdatabase = ($sqlconf['varsqlconfdatabase']?$sqlconf['varsqlconfdatabase']:'mysql'); + $varsqlconfserver = ($sqlconf['varsqlconfserver']?$sqlconf['varsqlconfserver']:'localhost'); + $varsqlconfport = ($sqlconf['varsqlconfport']?$sqlconf['varsqlconfport']:'3306'); + $varsqlconflogin = ($sqlconf['varsqlconflogin']?$sqlconf['varsqlconflogin']:'radius'); + $varsqlconfpassword = ($sqlconf['varsqlconfpassword']?$sqlconf['varsqlconfpassword']:'radpass'); + $varsqlconfradiusdb = ($sqlconf['varsqlconfradiusdb']?$sqlconf['varsqlconfradiusdb']:'radius'); + $varsqlconfaccttable1 = ($sqlconf['varsqlconfaccttable1']?$sqlconf['varsqlconfaccttable1']:'radacct'); + $varsqlconfaccttable2 = ($sqlconf['varsqlconfaccttable2']?$sqlconf['varsqlconfaccttable2']:'radacct'); + $varsqlconfpostauthtable = ($sqlconf['varsqlconfpostauthtable']?$sqlconf['varsqlconfpostauthtable']:'radpostauth'); + $varsqlconfauthchecktable = ($sqlconf['varsqlconfauthchecktable']?$sqlconf['varsqlconfauthchecktable']:'radcheck'); + $varsqlconfauthreplytable = ($sqlconf['varsqlconfauthreplytable']?$sqlconf['varsqlconfauthreplytable']:'radreply'); + $varsqlconfgroupchecktable = ($sqlconf['varsqlconfgroupchecktable']?$sqlconf['varsqlconfgroupchecktable']:'radgroupcheck'); + $varsqlconfgroupreplytable = ($sqlconf['varsqlconfgroupreplytable']?$sqlconf['varsqlconfgroupreplytable']:'radgroupreply'); + $varsqlconfusergrouptable = ($sqlconf['varsqlconfusergrouptable']?$sqlconf['varsqlconfusergrouptable']:'radusergroup'); + $varsqlconfreadgroups = ($sqlconf['varsqlconfreadgroups']?$sqlconf['varsqlconfreadgroups']:'yes'); + $varsqlconfdeletestalesessions = ($sqlconf['varsqlconfdeletestalesessions']?$sqlconf['varsqlconfdeletestalesessions']:'yes'); + $varsqlconfsqltrace = ($sqlconf['varsqlconfsqltrace']?$sqlconf['varsqlconfsqltrace']:'no'); + $varsqlconfnumsqlsocks = ($sqlconf['varsqlconfnumsqlsocks']?$sqlconf['varsqlconfnumsqlsocks']:'5'); + $varsqlconfconnectfailureretrydelay = ($sqlconf['varsqlconfconnectfailureretrydelay']?$sqlconf['varsqlconfconnectfailureretrydelay']:'60'); + $varsqlconflifetime = ($sqlconf['varsqlconflifetime']?$sqlconf['varsqlconflifetime']:'0'); + $varsqlconfmaxqueries = ($sqlconf['varsqlconfmaxqueries']?$sqlconf['varsqlconfmaxqueries']:'0'); + $varsqlconfreadclients = ($sqlconf['varsqlconfreadclients']?$sqlconf['varsqlconfreadclients']:'yes'); + $varsqlconfnastable = ($sqlconf['varsqlconfnastable']?$sqlconf['varsqlconfnastable']:'nas'); // These lines are uncommented in fuction "freeradius_settings_resync" to INCLUDE / enable eap.conf // $sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0]; - // $varsqlconfenable = $sqlconf['varsqlconfenable']; - // $varsqlconfenablecounter = $sqlconf['varsqlconfenablecounter']; + // $varsqlconfenable = ($sqlconf['varsqlconfenable']?$sqlconf['varsqlconfenable']:'#\$INCLUDE sql.conf'); + // $varsqlconfenablecounter = ($sqlconf['varsqlconfenablecounter']?$sqlconf['varsqlconfenablecounter']:'#\$INCLUDE sql/mysql/counter.conf'); $conf .= <<<EOD @@ -552,4 +594,667 @@ EOD; restart_service('freeradius'); } + +function freeradius_serverdefault_resync() { + global $config; + $conf = ''; + + $conf .= <<<EOD + +###################################################################### +# +# As of 2.0.0, FreeRADIUS supports virtual hosts using the +# "server" section, and configuration directives. +# +# Virtual hosts should be put into the "sites-available" +# directory. Soft links should be created in the "sites-enabled" +# directory to these files. This is done in a normal installation. +# +# If you are using 802.1X (EAP) authentication, please see also +# the "inner-tunnel" virtual server. You wll likely have to edit +# that, too, for authentication to work. +# +# $Id$ +# +###################################################################### +# +# Read "man radiusd" before editing this file. See the section +# titled DEBUGGING. It outlines a method where you can quickly +# obtain the configuration you want, without running into +# trouble. See also "man unlang", which documents the format +# of this file. +# +# This configuration is designed to work in the widest possible +# set of circumstances, with the widest possible number of +# authentication methods. This means that in general, you should +# need to make very few changes to this file. +# +# The best way to configure the server for your local system +# is to CAREFULLY edit this file. Most attempts to make large +# edits to this file will BREAK THE SERVER. Any edits should +# be small, and tested by running the server with "radiusd -X". +# Once the edits have been verified to work, save a copy of these +# configuration files somewhere. (e.g. as a "tar" file). Then, +# make more edits, and test, as above. +# +# There are many "commented out" references to modules such +# as ldap, sql, etc. These references serve as place-holders. +# If you need the functionality of that module, then configure +# it in radiusd.conf, and un-comment the references to it in +# this file. In most cases, those small changes will result +# in the server being able to connect to the DB, and to +# authenticate users. +# +###################################################################### + +# +# In 1.x, the "authorize", etc. sections were global in +# radiusd.conf. As of 2.0, they SHOULD be in a server section. +# +# The server section with no virtual server name is the "default" +# section. It is used when no server name is specified. +# +# We don't indent the rest of this file, because doing so +# would make it harder to read. +# + +# Authorization. First preprocess (hints and huntgroups files), +# then realms, and finally look in the "users" file. +# +# Any changes made here should also be made to the "inner-tunnel" +# virtual server. +# +# The order of the realm modules will determine the order that +# we try to find a matching realm. +# +# Make *sure* that 'preprocess' comes before any realm if you +# need to setup hints for the remote radius server +authorize { + # + # Security settings. Take a User-Name, and do some simple + # checks on it, for spaces and other invalid characters. If + # it looks like the user is trying to play games, reject it. + # + # This should probably be enabled by default. + # + # See policy.conf for the definition of the filter_username policy. + # +# filter_username + + # + # The preprocess module takes care of sanitizing some bizarre + # attributes in the request, and turning them into attributes + # which are more standard. + # + # It takes care of processing the 'raddb/hints' and the + # 'raddb/huntgroups' files. + preprocess + + # + # If you want to have a log of authentication requests, + # un-comment the following line, and the 'detail auth_log' + # section, above. +# auth_log + + # + # The chap module will set 'Auth-Type := CHAP' if we are + # handling a CHAP request and Auth-Type has not already been set + chap + + # + # If the users are logging in with an MS-CHAP-Challenge + # attribute for authentication, the mschap module will find + # the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP' + # to the request, which will cause the server to then use + # the mschap module for authentication. + mschap + + # + # If you have a Cisco SIP server authenticating against + # FreeRADIUS, uncomment the following line, and the 'digest' + # line in the 'authenticate' section. + digest + + # + # The WiMAX specification says that the Calling-Station-Id + # is 6 octets of the MAC. This definition conflicts with + # RFC 3580, and all common RADIUS practices. Un-commenting + # the "wimax" module here means that it will fix the + # Calling-Station-Id attribute to the normal format as + # specified in RFC 3580 Section 3.21 +# wimax + + # + # Look for IPASS style 'realm/', and if not found, look for + # '@realm', and decide whether or not to proxy, based on + # that. +# IPASS + + # + # If you are using multiple kinds of realms, you probably + # want to set "ignore_null = yes" for all of them. + # Otherwise, when the first style of realm doesn't match, + # the other styles won't be checked. + # + suffix +# ntdomain + + # + # This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP + # authentication. + # + # It also sets the EAP-Type attribute in the request + # attribute list to the EAP type from the packet. + # + # As of 2.0, the EAP module returns "ok" in the authorize stage + # for TTLS and PEAP. In 1.x, it never returned "ok" here, so + # this change is compatible with older configurations. + # + # The example below uses module failover to avoid querying all + # of the following modules if the EAP module returns "ok". + # Therefore, your LDAP and/or SQL servers will not be queried + # for the many packets that go back and forth to set up TTLS + # or PEAP. The load on those servers will therefore be reduced. + # + eap { + ok = return + } + + # + # Pull crypt'd passwords from /etc/passwd or /etc/shadow, + # using the system API's to get the password. If you want + # to read /etc/passwd or /etc/shadow directly, see the + # passwd module in radiusd.conf. + # +# unix + + # + # Read the 'users' file + files + + # + # Look in an SQL database. The schema of the database + # is meant to mirror the "users" file. + # + # See "Authorization Queries" in sql.conf +# sql + + # + # If you are using /etc/smbpasswd, and are also doing + # mschap authentication, the un-comment this line, and + # configure the 'etc_smbpasswd' module, above. +# etc_smbpasswd + + # + # The ldap module will set Auth-Type to LDAP if it has not + # already been set +# ldap + + # + # Enforce daily limits on time spent logged in. +# daily + + # + # Use the checkval module +# checkval + + expiration + logintime + + # + # If no other module has claimed responsibility for + # authentication, then try to use PAP. This allows the + # other modules listed above to add a "known good" password + # to the request, and to do nothing else. The PAP module + # will then see that password, and use it to do PAP + # authentication. + # + # This module should be listed last, so that the other modules + # get a chance to set Auth-Type for themselves. + # + pap + + # + # If "status_server = yes", then Status-Server messages are passed + # through the following section, and ONLY the following section. + # This permits you to do DB queries, for example. If the modules + # listed here return "fail", then NO response is sent. + # + Autz-Type Status-Server { + + } +} + + +# Authentication. +# +# +# This section lists which modules are available for authentication. +# Note that it does NOT mean 'try each module in order'. It means +# that a module from the 'authorize' section adds a configuration +# attribute 'Auth-Type := FOO'. That authentication type is then +# used to pick the apropriate module from the list below. +# + +# In general, you SHOULD NOT set the Auth-Type attribute. The server +# will figure it out on its own, and will do the right thing. The +# most common side effect of erroneously setting the Auth-Type +# attribute is that one authentication method will work, but the +# others will not. +# +# The common reasons to set the Auth-Type attribute by hand +# is to either forcibly reject the user (Auth-Type := Reject), +# or to or forcibly accept the user (Auth-Type := Accept). +# +# Note that Auth-Type := Accept will NOT work with EAP. +# +# Please do not put "unlang" configurations into the "authenticate" +# section. Put them in the "post-auth" section instead. That's what +# the post-auth section is for. +# +authenticate { + # + # PAP authentication, when a back-end database listed + # in the 'authorize' section supplies a password. The + # password can be clear-text, or encrypted. + Auth-Type PAP { + pap + } + + # + # Most people want CHAP authentication + # A back-end database listed in the 'authorize' section + # MUST supply a CLEAR TEXT password. Encrypted passwords + # won't work. + Auth-Type CHAP { + chap + } + + # + # MSCHAP authentication. + Auth-Type MS-CHAP { + mschap + } + + # + # If you have a Cisco SIP server authenticating against + # FreeRADIUS, uncomment the following line, and the 'digest' + # line in the 'authorize' section. + digest + + # + # Pluggable Authentication Modules. +# pam + + # + # See 'man getpwent' for information on how the 'unix' + # module checks the users password. Note that packets + # containing CHAP-Password attributes CANNOT be authenticated + # against /etc/passwd! See the FAQ for details. + # + # For normal "crypt" authentication, the "pap" module should + # be used instead of the "unix" module. The "unix" module should + # be used for authentication ONLY for compatibility with legacy + # FreeRADIUS configurations. + # + unix + + # Uncomment it if you want to use ldap for authentication + # + # Note that this means "check plain-text password against + # the ldap database", which means that EAP won't work, + # as it does not supply a plain-text password. +# Auth-Type LDAP { +# ldap +# } + + # + # Allow EAP authentication. + eap + + # + # The older configurations sent a number of attributes in + # Access-Challenge packets, which wasn't strictly correct. + # If you want to filter out these attributes, uncomment + # the following lines. + # +# Auth-Type eap { +# eap { +# handled = 1 +# } +# if (handled && (Response-Packet-Type == Access-Challenge)) { +# attr_filter.access_challenge.post-auth +# handled # override the "updated" code from attr_filter +# } +# } +} + + +# +# Pre-accounting. Decide which accounting type to use. +# +preacct { + preprocess + + # + # Session start times are *implied* in RADIUS. + # The NAS never sends a "start time". Instead, it sends + # a start packet, *possibly* with an Acct-Delay-Time. + # The server is supposed to conclude that the start time + # was "Acct-Delay-Time" seconds in the past. + # + # The code below creates an explicit start time, which can + # then be used in other modules. + # + # The start time is: NOW - delay - session_length + # + +# update request { +# FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}" +# } + + + # + # Ensure that we have a semi-unique identifier for every + # request, and many NAS boxes are broken. + acct_unique + + # + # Look for IPASS-style 'realm/', and if not found, look for + # '@realm', and decide whether or not to proxy, based on + # that. + # + # Accounting requests are generally proxied to the same + # home server as authentication requests. +# IPASS + suffix +# ntdomain + + # + # Read the 'acct_users' file + files +} + +# +# Accounting. Log the accounting data. +# +accounting { + # + # Create a 'detail'ed log of the packets. + # Note that accounting requests which are proxied + # are also logged in the detail file. + detail +# daily + + # Update the wtmp file + # + # If you don't use "radlast", you can delete this line. + unix + + # + # For Simultaneous-Use tracking. + # + # Due to packet losses in the network, the data here + # may be incorrect. There is little we can do about it. + radutmp +# sradutmp + + # Return an address to the IP Pool when we see a stop record. +# main_pool + + # + # Log traffic to an SQL database. + # + # See "Accounting queries" in sql.conf +# sql + + # + # If you receive stop packets with zero session length, + # they will NOT be logged in the database. The SQL module + # will print a message (only in debugging mode), and will + # return "noop". + # + # You can ignore these packets by uncommenting the following + # three lines. Otherwise, the server will not respond to the + # accounting request, and the NAS will retransmit. + # +# if (noop) { +# ok +# } + + # + # Instead of sending the query to the SQL server, + # write it into a log file. + # +# sql_log + + # Cisco VoIP specific bulk accounting +# pgsql-voip + + # For Exec-Program and Exec-Program-Wait + exec + + # Filter attributes from the accounting response. + attr_filter.accounting_response + + # + # See "Autz-Type Status-Server" for how this works. + # + Acct-Type Status-Server { + + } +} + + +# Session database, used for checking Simultaneous-Use. Either the radutmp +# or rlm_sql module can handle this. +# The rlm_sql module is *much* faster +session { + radutmp + + # + # See "Simultaneous Use Checking Queries" in sql.conf +# sql +} + + +# Post-Authentication +# Once we KNOW that the user has been authenticated, there are +# additional steps we can take. +post-auth { + # Get an address from the IP Pool. +# main_pool + + # + # If you want to have a log of authentication replies, + # un-comment the following line, and the 'detail reply_log' + # section, above. +# reply_log + + # + # After authenticating the user, do another SQL query. + # + # See "Authentication Logging Queries" in sql.conf +# sql + + # + # Instead of sending the query to the SQL server, + # write it into a log file. + # +# sql_log + + # + # Un-comment the following if you have set + # 'edir_account_policy_check = yes' in the ldap module sub-section of + # the 'modules' section. + # +# ldap + + # For Exec-Program and Exec-Program-Wait + exec + + # + # Calculate the various WiMAX keys. In order for this to work, + # you will need to define the WiMAX NAI, usually via + # + # update request { + # WiMAX-MN-NAI = "%{User-Name}" + # } + # + # If you want various keys to be calculated, you will need to + # update the reply with "template" values. The module will see + # this, and replace the template values with the correct ones + # taken from the cryptographic calculations. e.g. + # + # update reply { + # WiMAX-FA-RK-Key = 0x00 + # WiMAX-MSK = "%{EAP-MSK}" + # } + # + # You may want to delete the MS-MPPE-*-Keys from the reply, + # as some WiMAX clients behave badly when those attributes + # are included. See "raddb/modules/wimax", configuration + # entry "delete_mppe_keys" for more information. + # +# wimax + + # If there is a client certificate (EAP-TLS, sometimes PEAP + # and TTLS), then some attributes are filled out after the + # certificate verification has been performed. These fields + # MAY be available during the authentication, or they may be + # available only in the "post-auth" section. + # + # The first set of attributes contains information about the + # issuing certificate which is being used. The second + # contains information about the client certificate (if + # available). +# +# update reply { +# Reply-Message += "%{TLS-Cert-Serial}" +# Reply-Message += "%{TLS-Cert-Expiration}" +# Reply-Message += "%{TLS-Cert-Subject}" +# Reply-Message += "%{TLS-Cert-Issuer}" +# Reply-Message += "%{TLS-Cert-Common-Name}" +# +# Reply-Message += "%{TLS-Client-Cert-Serial}" +# Reply-Message += "%{TLS-Client-Cert-Expiration}" +# Reply-Message += "%{TLS-Client-Cert-Subject}" +# Reply-Message += "%{TLS-Client-Cert-Issuer}" +# Reply-Message += "%{TLS-Client-Cert-Common-Name}" +# } + + + # If the WiMAX module did it's work, you may want to do more + # things here, like delete the MS-MPPE-*-Key attributes. + # + # if (updated) { + # update reply { + # MS-MPPE-Recv-Key !* 0x00 + # MS-MPPE-Send-Key !* 0x00 + # } + # } + + # + # Access-Reject packets are sent through the REJECT sub-section of the + # post-auth section. + # + # Add the ldap module name (or instance) if you have set + # 'edir_account_policy_check = yes' in the ldap module configuration + # + Post-Auth-Type REJECT { + # log failed authentications in SQL, too. +# sql + attr_filter.access_reject + } +} + +# +# When the server decides to proxy a request to a home server, +# the proxied request is first passed through the pre-proxy +# stage. This stage can re-write the request, or decide to +# cancel the proxy. +# +# Only a few modules currently have this method. +# +pre-proxy { +# attr_rewrite + + # Uncomment the following line if you want to change attributes + # as defined in the preproxy_users file. +# files + + # Uncomment the following line if you want to filter requests + # sent to remote servers based on the rules defined in the + # 'attrs.pre-proxy' file. +# attr_filter.pre-proxy + + # If you want to have a log of packets proxied to a home + # server, un-comment the following line, and the + # 'detail pre_proxy_log' section, above. +# pre_proxy_log +} + +# +# When the server receives a reply to a request it proxied +# to a home server, the request may be massaged here, in the +# post-proxy stage. +# +post-proxy { + + # If you want to have a log of replies from a home server, + # un-comment the following line, and the 'detail post_proxy_log' + # section, above. +# post_proxy_log + +# attr_rewrite + + # Uncomment the following line if you want to filter replies from + # remote proxies based on the rules defined in the 'attrs' file. +# attr_filter.post-proxy + + # + # If you are proxying LEAP, you MUST configure the EAP + # module, and you MUST list it here, in the post-proxy + # stage. + # + # You MUST also use the 'nostrip' option in the 'realm' + # configuration. Otherwise, the User-Name attribute + # in the proxied request will not match the user name + # hidden inside of the EAP packet, and the end server will + # reject the EAP request. + # + eap + + # + # If the server tries to proxy a request and fails, then the + # request is processed through the modules in this section. + # + # The main use of this section is to permit robust proxying + # of accounting packets. The server can be configured to + # proxy accounting packets as part of normal processing. + # Then, if the home server goes down, accounting packets can + # be logged to a local "detail" file, for processing with + # radrelay. When the home server comes back up, radrelay + # will read the detail file, and send the packets to the + # home server. + # + # With this configuration, the server always responds to + # Accounting-Requests from the NAS, but only writes + # accounting packets to disk if the home server is down. + # +# Post-Proxy-Type Fail { +# detail +# } +} + +EOD; + + $filename = RADDB . '/sites-available/default'; + conf_mount_rw(); + file_put_contents($filename, $conf); + chmod($filename, 0600); + conf_mount_ro(); + + restart_service('freeradius'); +} ?>
\ No newline at end of file diff --git a/config/freeradius2/freeradius.xml b/config/freeradius2/freeradius.xml index 2d913f13..674a6266 100644 --- a/config/freeradius2/freeradius.xml +++ b/config/freeradius2/freeradius.xml @@ -90,7 +90,36 @@ <url>/pkg_edit.php?xml=freeradiussqlconf.xml&id=0</url> </tab> </tabs> - + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusclients.xml</item> + </additional_files_needed> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussettings.xml</item> + </additional_files_needed> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + <item>http://www.pfsense.org/packages/config/freeradius2/freeradiuseapconf.xml</item> + </additional_files_needed> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussqlconf.xml</item> + </additional_files_needed> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusinterfaces.xml</item> + </additional_files_needed> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + <item>http://www.pfsense.org/packages/config/freeradius2/freeradius.inc</item> + </additional_files_needed> <adddeleteeditpagefields> <columnitem> <fielddescr>Username</fielddescr> @@ -129,36 +158,6 @@ <fieldname>vlanid</fieldname> </columnitem> </adddeleteeditpagefields> - <additional_files_needed> - <prefix>/usr/local/pkg/</prefix> - <chmod>0755</chmod> - <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusclients.xml</item> - </additional_files_needed> - <additional_files_needed> - <prefix>/usr/local/pkg/</prefix> - <chmod>0755</chmod> - <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussettings.xml</item> - </additional_files_needed> - <additional_files_needed> - <prefix>/usr/local/pkg/</prefix> - <chmod>0755</chmod> - <item>http://www.pfsense.org/packages/config/freeradius2/freeradiuseapconf.xml</item> - </additional_files_needed> - <additional_files_needed> - <prefix>/usr/local/pkg/</prefix> - <chmod>0755</chmod> - <item>http://www.pfsense.org/packages/config/freeradius2/freeradiussqlconf.xml</item> - </additional_files_needed> - <additional_files_needed> - <prefix>/usr/local/pkg/</prefix> - <chmod>0755</chmod> - <item>http://www.pfsense.org/packages/config/freeradius2/freeradiusinterfaces.xml</item> - </additional_files_needed> - <additional_files_needed> - <prefix>/usr/local/pkg/</prefix> - <chmod>0755</chmod> - <item>http://www.pfsense.org/packages/config/freeradius2/freeradius.inc</item> - </additional_files_needed> <fields> <field> <name>GENERAL CONFIGURATION</name> @@ -268,6 +267,17 @@ <rows>10</rows> <cols>75</cols> </field> + <field> + <fielddescr>Output</fielddescr> + <fieldname>usersoutput</fieldname> + <description><![CDATA[This is for experts only and should be treat with care!<br> + You may append (after all options from above) custom RADIUS options to this user account (separated by commas).<br> + <b>IMPORTANT:</b> If you don't format this field correctly freeRADIUS will not start because of syntax errors.<br> + Verify your changes by checking users file (/usr/local/etc/raddb/users).]]></description> + <type>textarea</type> + <rows>10</rows> + <cols>75</cols> + </field> </fields> <custom_delete_php_command> freeradius_users_resync(); @@ -282,6 +292,7 @@ freeradius_users_resync(); freeradius_eapconf_resync(); freeradius_sqlconf_resync(); + freeradius_serverdefault_resync(); exec("rm -f /usr/local/etc/raddb/sites-enabled/control-socket"); exec("rm -f /usr/local/etc/raddb/sites-enabled/inner-tunnel"); </custom_php_install_command> diff --git a/config/freeradius2/freeradiussettings.xml b/config/freeradius2/freeradiussettings.xml index 2f4189fd..2f4189fd 100644..100755 --- a/config/freeradius2/freeradiussettings.xml +++ b/config/freeradius2/freeradiussettings.xml diff --git a/config/freeradius2/freeradiussqlconf.xml b/config/freeradius2/freeradiussqlconf.xml index 8a53b923..c8af86d6 100644 --- a/config/freeradius2/freeradiussqlconf.xml +++ b/config/freeradius2/freeradiussqlconf.xml @@ -300,10 +300,12 @@ </fields> <custom_delete_php_command> freeradius_sqlconf_resync(); + freeradius_serverdefault_resync(); freeradius_settings_resync(); </custom_delete_php_command> <custom_php_resync_config_command> freeradius_sqlconf_resync(); + freeradius_serverdefault_resync(); freeradius_settings_resync(); </custom_php_resync_config_command> </packagegui>
\ No newline at end of file |