aboutsummaryrefslogtreecommitdiffstats
path: root/config/freeradius2/freeradius.inc
diff options
context:
space:
mode:
Diffstat (limited to 'config/freeradius2/freeradius.inc')
-rw-r--r--config/freeradius2/freeradius.inc300
1 files changed, 162 insertions, 138 deletions
diff --git a/config/freeradius2/freeradius.inc b/config/freeradius2/freeradius.inc
index 6d626e3a..005a193a 100644
--- a/config/freeradius2/freeradius.inc
+++ b/config/freeradius2/freeradius.inc
@@ -1,19 +1,12 @@
<?php
-/* copyright */
-/* ========================================================================== */
/*
freeradius.inc
- part of pfSense (http://www.pfSense.com)
+ part of pfSense (https://www.pfSense.org/)
Copyright (C) 2013 Alexander Wilke <nachtfalkeaw@web.de>
Copyright (C) 2013 Marcello Coutinho
+ Copyright (C) 2015 ESF, LLC
All rights reserved.
- Based on m0n0wall (http://m0n0.ch/wall)
- Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
- All rights reserved.
- */
-/* ========================================================================== */
-/*
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
@@ -34,9 +27,7 @@
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
- */
-/* ========================================================================== */
-
+*/
require_once('config.inc');
require_once('service-utils.inc');
require_once("util.inc");
@@ -630,7 +621,7 @@ if (is_array($arrusers) && !empty($arrusers)) {
// If an octet limit is NOT set we delete the files for the limit and the counter.
else {
if (file_exists("/var/log/radacct/datacounter/$varusersmaxtotaloctetstimerange/max-octets-$varusersusername")) { unlink("/var/log/radacct/datacounter/$varusersmaxtotaloctetstimerange/max-octets-$varusersusername"); }
- if (file_exists("/var/log/radacct/datacounter/$varusersmaxtotaloctetstimerange/used-octets-$varusersusername")) { unlink("/var/log/radacct/datacounter/$varusersmaxtotaloctetstimerange/used-octets-$varusersusername"); }
+ if (file_exists("/var/log/radacct/datacounter/$varusersmaxtotaloctetstimerange/used-octets-$varusersusername")) { unlink("/var/log/radacct/datacounter/$varusersmaxtotaloctetstimerange/used-octets-$varusersusername*"); }
}
if ($varusersadditionaloptionsreplyitems != '') {
if ($varusersreplyitem != '') { $varusersreplyitem .=","; }
@@ -824,7 +815,7 @@ if (is_array($arrmacs) && !empty($arrmacs)) {
// If an octet limit is NOT set we delete the files for the limit and the counter.
else {
if (file_exists("/var/log/radacct/datacounter/$varmacsmaxtotaloctetstimerange/max-octets-$varmacsaddress")) { unlink("/var/log/radacct/datacounter/$varmacsmaxtotaloctetstimerange/max-octets-$varmacsaddress"); }
- if (file_exists("/var/log/radacct/datacounter/$varmacsmaxtotaloctetstimerange/used-octets-$varmacsaddress")) { unlink("/var/log/radacct/datacounter/$varmacsmaxtotaloctetstimerange/used-octets-$varmacsaddress"); }
+ if (file_exists("/var/log/radacct/datacounter/$varmacsmaxtotaloctetstimerange/used-octets-$varmacsaddress")) { unlink("/var/log/radacct/datacounter/$varmacsmaxtotaloctetstimerange/used-octets-$varmacsaddress*"); }
}
if ($varmacsadditionaloptionsreplyitems != '') {
if ($varmacsreplyitem != '') { $varmacsreplyitem .=","; }
@@ -2571,163 +2562,181 @@ conf_mount_ro();
/* Uses XMLRPC to synchronize the changes to a remote node */
function freeradius_sync_on_changes() {
- global $config, $g;
- if (is_array($config['installedpackages']['freeradiussync'])){
+ global $config;
+
+ if (is_array($config['installedpackages']['freeradiussync'])) {
$synconchanges = $config['installedpackages']['freeradiussync']['config'][0]['varsyncenablexmlrpc'];
- $varsynctimeout = $config['installedpackages']['freeradiussync']['config'][0]['varsynctimeout'];
- }
- else
- {
+ $varsynctimeout = $config['installedpackages']['freeradiussync']['config'][0]['varsynctimeout'] ?: '150';
+ } else {
return;
}
// if checkbox is NOT checked do nothing
- switch ($synconchanges){
+ switch ($synconchanges) {
case "manual":
- if (is_array($config['installedpackages']['freeradiussync']['config'][0]['row'])){
- $rs=$config['installedpackages']['freeradiussync']['config'][0]['row'];
- }
- else{
- log_error("[FreeRADIUS]: xmlrpc sync is enabled but there is no hosts to push on FreeRADIUS config.");
+ if (is_array($config['installedpackages']['freeradiussync']['config'][0]['row'])) {
+ $rs = $config['installedpackages']['freeradiussync']['config'][0]['row'];
+ } else {
+ log_error("[FreeRADIUS]: XMLRPC sync is enabled but there are no hosts configured as replication targets.");
return;
- }
+ }
break;
case "auto":
- if (is_array($config['installedpackages']['carpsettings']) && is_array($config['installedpackages']['carpsettings']['config'])){
- $system_carp=$config['installedpackages']['carpsettings']['config'][0];
- $rs[0]['varsyncdestinenable']="on";
- $rs[0]['varsyncprotocol']=($config['system']['webgui']['protocol']!=""?$config['system']['webgui']['protocol']:"https");
- $rs[0]['varsyncipaddress']=$system_carp['synchronizetoip'];
- $rs[0]['varsyncpassword']=$system_carp['password'];
- $rs[0]['varsyncport']=($config['system']['webgui']['port']!=""?$config['system']['webgui']['port']:"443");
- if (! is_ipaddr($system_carp['synchronizetoip'])){
- log_error("[FreeRADIUS]: xmlrpc sync is enabled but there is no system backup hosts to push FreeRADIUS config.");
- return;
- }
+ if (is_array($config['hasync'])) {
+ $system_carp = $config['hasync'];
+ $rs[0]['varsyncipaddress'] = $system_carp['synchronizetoip'];
+ $rs[0]['varsyncusername'] = $system_carp['username'];
+ $rs[0]['varsyncpassword'] = $system_carp['password'];
+ $rs[0]['varsyncdestinenable'] = FALSE;
+
+ // XMLRPC sync is currently only supported over connections using the same protocol and port as this system
+ if ($config['system']['webgui']['protocol'] == "http") {
+ $rs[0]['varsyncprotocol'] = "http";
+ $rs[0]['varsyncport'] = $config['system']['webgui']['port'] ?: '80';
+ } else {
+ $rs[0]['varsyncprotocol'] = "https";
+ $rs[0]['varsyncport'] = $config['system']['webgui']['port'] ?: '443';
}
- else{
- log_error("[FreeRADIUS]: xmlrpc sync is enabled but there is no system backup hosts to push FreeRADIUS config.");
+ if ($system_carp['synchronizetoip'] == "") {
+ log_error("[FreeRADIUS]: XMLRPC CARP/HA sync is enabled but there are no system backup hosts configured as replication targets.");
return;
+ } else {
+ $rs[0]['varsyncdestinenable'] = TRUE;
}
+ } else {
+ log_error("[FreeRADIUS]: XMLRPC CARP/HA sync is enabled but there are no system backup hosts configured as replication targets.");
+ return;
+ }
break;
default:
return;
- break;
- }
- if (is_array($rs)){
- log_error("[FreeRADIUS]: xmlrpc sync is starting with timeout {$varsynctimeout} seconds.");
- foreach($rs as $sh){
- if($sh['varsyncdestinenable']){
- $varsyncprotocol = $sh['varsyncprotocol'];
- $sync_to_ip = $sh['varsyncipaddress'];
- $password = $sh['varsyncpassword'];
- $varsyncport = $sh['varsyncport'];
- if($password && $sync_to_ip)
- freeradius_do_xmlrpc_sync($sync_to_ip, $password, $varsyncport, $varsyncprotocol,$varsynctimeout);
- else
- log_error("[FreeRADIUS]: XMLRPC Sync with {$sh['varsyncipaddress']} has incomplete credentials. No XMLRPC Sync done!");
+ break;
+ }
+ if (is_array($rs)) {
+ log_error("[FreeRADIUS]: XMLRPC sync is starting with timeout {$varsynctimeout} seconds.");
+ foreach ($rs as $sh) {
+ if ($sh['varsyncdestinenable']) {
+ $sync_to_ip = $sh['varsyncipaddress'];
+ $varsyncport = $sh['varsyncport'];
+ $varsyncprotocol = $sh['varsyncprotocol'];
+ $username = $sh['varsyncusername'] ?: 'admin';
+ $password = $sh['varsyncpassword'];
+
+ $error = '';
+ $valid = TRUE;
+
+ if ($password == "") {
+ $error = "Password parameter is empty. ";
+ $valid = FALSE;
}
- else {
- log_error("[FreeRADIUS]: XMLRPC Sync with {$sh['varsyncipaddress']} is disabled");
+ if (!is_ipaddr($sync_to_ip) && !is_hostname($sync_to_ip) && !is_domain($sync_to_ip)) {
+ $error .= "Misconfigured Replication Target IP Address or Hostname. ";
+ $valid = FALSE;
}
+ if (!is_port($varsyncport)) {
+ $error .= "Misconfigured Replication Target Port. ";
+ $valid = FALSE;
+ }
+ if ($valid) {
+ freeradius_do_xmlrpc_sync($sync_to_ip, $username, $password, $varsyncport, $varsyncprotocol, $varsynctimeout);
+ } else {
+ log_error("[FreeRADIUS]: XMLRPC Sync with '{$sync_to_ip}' aborted due to the following error(s): {$error}");
+ }
+ } else {
+ log_error("[FreeRADIUS]: XMLRPC Sync with {$sh['varsyncipaddress']} is disabled");
}
- log_error("[FreeRADIUS]: xmlrpc sync is ending.");
- }
+ }
+ log_error("[FreeRADIUS]: XMLRPC sync is ending.");
+ }
}
/* Do the actual XMLRPC sync */
-function freeradius_do_xmlrpc_sync($sync_to_ip, $password, $varsyncport, $varsyncprotocol,$varsynctimeout) {
+function freeradius_do_xmlrpc_sync($sync_to_ip, $username, $password, $varsyncport, $varsyncprotocol, $varsynctimeout) {
global $config, $g;
- if($varsynctimeout == '' || $varsynctimeout == 0)
- $varsynctimeout = 150;
-
- if(!$password)
+ /* Detect boot process, do nothing during boot. */
+ if (function_exists("platform_booting")) {
+ if (platform_booting()) {
+ return;
+ }
+ } elseif ($g['booting']) {
return;
+ }
- if(!$sync_to_ip)
- return;
-
- if(!$varsyncport)
+ if ($username == "" || $password == "" || $sync_to_ip == "" || $varsyncport == "" || $varsyncprotocol == "") {
+ log_error("[FreeRADIUS]: A required XMLRPC sync parameter (username, password, replication target, port or protocol) is empty ... aborting pkg sync");
return;
+ }
- if(!$varsyncprotocol)
- return;
-
- // Check and choose correct protocol type, port number and IP address
- $synchronizetoip .= "$varsyncprotocol" . '://';
- $port = "$varsyncport";
+ /* Take care of IPv6 literal address */
+ if (is_ipaddrv6($sync_to_ip)) {
+ $sync_to_ip = "[{$sync_to_ip}]";
+ }
- $synchronizetoip .= $sync_to_ip;
+ $url = "{$varsyncprotocol}://{$sync_to_ip}";
+ $port = $varsyncport;
- /* xml will hold the sections to sync */
+ /* XML will hold the sections to sync. */
$xml = array();
$xml['freeradius'] = $config['installedpackages']['freeradius'];
$xml['freeradiusauthorizedmacs'] = $config['installedpackages']['freeradiusauthorizedmacs'];
$xml['freeradiusclients'] = $config['installedpackages']['freeradiusclients'];
- /* assemble xmlrpc payload */
- $params = array(
- XML_RPC_encode($password),
- XML_RPC_encode($xml)
- );
+ /* Assemble XMLRPC payload. */
+ $params = array(XML_RPC_encode($password), XML_RPC_encode($xml));
- /* set a few variables needed for sync code borrowed from filter.inc */
- $url = $synchronizetoip;
+ /* Set a few variables needed for sync code */
log_error("[FreeRADIUS]: Beginning FreeRADIUS XMLRPC sync with {$url}:{$port}.");
$method = 'pfsense.merge_installedpackages_section_xmlrpc';
$msg = new XML_RPC_Message($method, $params);
$cli = new XML_RPC_Client('/xmlrpc.php', $url, $port);
- $cli->setCredentials('admin', $password);
- if($g['debug'])
- $cli->setDebug(1);
- /* send our XMLRPC message and timeout after $varsynctimeout seconds */
+ $cli->setCredentials($username, $password);
+ if ($g['debug']) {
+ $cli->setDebug(1);
+ }
+ /* Send our XMLRPC message and timeout after defined sync timeout value */
+ $resp = $cli->send($msg, $varsynctimeout);
+ if (!$resp) {
+ $error = "A communications error occurred while FreeRADIUS was attempting XMLRPC sync with {$url}:{$port}.";
+ log_error("[FreeRADIUS]: {$error}");
+ file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
+ } elseif ($resp->faultCode()) {
+ $cli->setDebug(1);
$resp = $cli->send($msg, $varsynctimeout);
- if(!$resp) {
- $error = "A communications error occurred while FreeRADIUS was attempting XMLRPC sync with {$url}:{$port}.";
- log_error("[FreeRADIUS]: $error");
- file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
- } elseif($resp->faultCode()) {
- $cli->setDebug(1);
- $resp = $cli->send($msg, $varsynctimeout);
- $error = "An error code was received while FreeRADIUS XMLRPC was attempting to sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString();
- log_error("[FreeRADIUS]: $error");
- file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
- } else {
- log_error("[FreeRADIUS]: XMLRPC has synced data successfully with {$url}:{$port}.");
- }
+ $error = "An error code was received while FreeRADIUS XMLRPC was attempting to sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString();
+ log_error("[FreeRADIUS]: {$error}");
+ file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
+ } else {
+ log_error("[FreeRADIUS]: XMLRPC has synced data successfully with {$url}:{$port}.");
+ }
- /* tell FreeRADIUS to reload our settings on the destionation sync host. */
+ /* Tell FreeRADIUS to reload our settings on the destionation sync host. */
$method = 'pfsense.exec_php';
$execcmd = "require_once('/usr/local/pkg/freeradius.inc');\n";
- // pfblocker just needed one fuction to reload after XMLRPC. FreeRADIUS needs more so we point to a fuction below which contains all fuctions
+ /* pfblocker just needed one fuction to reload after XMLRPC. FreeRADIUS needs more so we point to a fuction below which contains all fuctions */
$execcmd .= "freeradius_all_after_XMLRPC_resync();";
- /* assemble xmlrpc payload */
- $params = array(
- XML_RPC_encode($password),
- XML_RPC_encode($execcmd)
- );
+ /* Assemble XMLRPC payload. */
+ $params = array(XML_RPC_encode($password), XML_RPC_encode($execcmd));
log_error("[FreeRADIUS]: XMLRPC is reloading data on {$url}:{$port}.");
$msg = new XML_RPC_Message($method, $params);
$cli = new XML_RPC_Client('/xmlrpc.php', $url, $port);
- $cli->setCredentials('admin', $password);
+ $cli->setCredentials($username, $password);
+ $resp = $cli->send($msg, $varsynctimeout);
+ if (!$resp) {
+ $error = "A communications error occurred while FreeRADIUS was attempting XMLRPC sync with {$url}:{$port} (exec_php).";
+ log_error("[FreeRADIUS]: {$error}");
+ file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
+ } elseif ($resp->faultCode()) {
+ $cli->setDebug(1);
$resp = $cli->send($msg, $varsynctimeout);
- if(!$resp) {
- $error = "A communications error occurred while FreeRADIUS was attempting XMLRPC sync with {$url}:{$port} (exec_php).";
- log_error($error);
- file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
- } elseif($resp->faultCode()) {
- $cli->setDebug(1);
- $resp = $cli->send($msg, $varsynctimeout);
- $error = "An error code was received while FreeRADIUS XMLRPC was attempting to sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString();
- log_error($error);
- file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
- } else {
- log_error("[FreeRADIUS]: XMLRPC has reloaded data successfully on {$url}:{$port} (exec_php).");
- }
-
+ $error = "An error code was received while FreeRADIUS XMLRPC was attempting to sync with {$url}:{$port} - Code " . $resp->faultCode() . ": " . $resp->faultString();
+ log_error("[FreeRADIUS]: {$error}");
+ file_notice("sync_settings", $error, "FreeRADIUS Settings Sync", "");
+ } else {
+ log_error("[FreeRADIUS]: XMLRPC has reloaded data successfully on {$url}:{$port} (exec_php).");
+ }
}
// This function restarts all other needed functions after XMLRPC so that the content of .XML + .INC will be written in the files (clients.conf, users)
@@ -2738,7 +2747,7 @@ function freeradius_all_after_XMLRPC_resync() {
freeradius_authorizedmacs_resync();
freeradius_clients_resync();
- log_error("FreeRADIUS: Finished XMLRPC process. It should be OK. For more information look at the host which started sync.");
+ log_error("[FreeRADIUS]: Finished XMLRPC process. It should be OK. For more information look at the host which started sync.");
exec(FREERADIUS_ETC . "/rc.d/radiusd onerestart");
}
@@ -4123,20 +4132,20 @@ function freeradius_modulesdatacounter_resync() {
$conf .= <<<EOD
exec datacounterdaily {
wait = yes
- program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} daily %{request:Acct-Input-Octets} %{request:Acct-Output-Octets}"
+ program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} daily %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
}
exec datacounterweekly {
wait = yes
- program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} weekly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets}"
+ program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} weekly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
}
exec datacountermonthly {
wait = yes
- program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} monthly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets}"
+ program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} monthly %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
}
exec datacounterforever {
wait = yes
- program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} forever %{request:Acct-Input-Octets} %{request:Acct-Output-Octets}"
- }
+ program = "/bin/sh {$varFREERADIUS_ETC}/raddb/scripts/datacounter_acct.sh %{request:User-Name} forever %{request:Acct-Input-Octets} %{request:Acct-Output-Octets} %{request:Acct-Status-Type} %{request:Acct-Session-Id}"
+ }
EOD;
$filename = FREERADIUS_ETC . '/raddb/modules/datacounter_acct';
@@ -4162,18 +4171,19 @@ TIMERANGE=`echo -n "\\$2" | sed 's/[^a-z]//g' `
### This is to make sure there is a used-octets file after the cronjob resetted the counter
if [ -e "/var/log/radacct/datacounter/\$TIMERANGE/max-octets-\$USERNAME" ] && [ ! -e "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME" ]; then
echo 0 > "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"
+ rm "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME-"*
fi
### The next two lines are just for getting values for logging output
-MAXOCTETSUSERNAMEMB=$((`cat "/var/log/radacct/datacounter/\$TIMERANGE/max-octets-\$USERNAME"`/1024/1024))
-USEDOCTETSUSERNAMEMB=$((`cat "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"`/1024/1024))
-
+MAXOCTETSUSERNAMEMB=$((`/bin/cat "/var/log/radacct/datacounter/\$TIMERANGE/max-octets-\$USERNAME"`/1024/1024))
+USEDOCTETSUSERNAMEMB=`/bin/cat "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\${USERNAME}"* | /usr/bin/awk '{ SUM += \$1; } END { print int(SUM/1024/1024); }'`
+
### We check if MAX-OCTETS-USERNAME is greater than USED-OCTETS-USERNAME and accept or reject the user
-if [ `cat "/var/log/radacct/datacounter/\$TIMERANGE/max-octets-\$USERNAME"` -gt `cat "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"` ]; then
- logger -f /var/log/system.log "FreeRADIUS: Used amount of \$TIMERANGE traffic by \$USERNAME is \$USEDOCTETSUSERNAMEMB MB of \$MAXOCTETSUSERNAMEMB MB! The user was accepted!!!"
+if [ \$MAXOCTETSUSERNAMEMB -gt \$USEDOCTETSUSERNAMEMB ]; then
+ logger -f /var/log/system.log "FreeRADIUS: User \$USERNAME has used \$USEDOCTETSUSERNAMEMB MB of \$MAXOCTETSUSERNAMEMB MB \$TIMERANGE allotted traffic. The login request was accepted."
exit 0
else
- logger -f /var/log/system.log "FreeRADIUS: Credentials are probably correct but the user \$USERNAME has reached the \$TIMERANGE Amount of Upload and Download Traffic which is \$USEDOCTETSUSERNAMEMB MB of \$MAXOCTETSUSERNAMEMB MB! The user was rejected!!!"
+ logger -f /var/log/system.log "FreeRADIUS: User \$USERNAME has reached the \$TIMERANGE amount of upload and download traffic (\$USEDOCTETSUSERNAMEMB MB of \$MAXOCTETSUSERNAMEMB MB). The login request was denied."
exit 99
fi
EOD;
@@ -4198,6 +4208,8 @@ USERNAME=`echo -n "\\$1" | sed 's/[^0-9a-zA-Z.:_-]/X/g' `
TIMERANGE=`echo -n "\\$2" | sed 's/[^a-z]//g' `
ACCTINPUTOCTETS=`echo -n "\\$3" | sed 's/[^0-9]/0/g' `
ACCTOUTPUTOCTETS=`echo -n "\\$4" | sed 's/[^0-9]/0/g' `
+UPDATETYPE=\$5
+SESSIONID=\$6
### If we do not get Octets we set some default values
if [ ! \$ACCTINPUTOCTETS ]; then
@@ -4216,11 +4228,23 @@ else
if [ ! -e "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME" ]; then
echo 0 > "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"
fi
-### The following two lines (chose the one or the other) are a bad workaround to make accounting accurate with stop/start accounting on pfsense 2.0.1 - it only works if the session will not be interrupted (host disconnects)
-### USEDOCTETS=\$((\$ACCTINPUTOCTETS+\$ACCTOUTPUTOCTETS))
- USEDOCTETS=\$((\$ACCTINPUTOCTETS+\$ACCTOUTPUTOCTETS+`cat "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"`))
-
- echo "\$USEDOCTETS" > "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"
+
+ USEDOCTETS=\$((\$ACCTINPUTOCTETS+\$ACCTOUTPUTOCTETS))
+
+ # If this is an interim update, track it in a separate session file
+ # since the incoming data is a gauge not a counter.
+ if [ \$UPDATETYPE = "Interim-Update" ]; then
+ echo \$USEDOCTETS > "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME-\$SESSIONID"
+ else
+ USEDOCTETS=\$((\$USEDOCTETS+`cat "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"`))
+
+ # If there was a session file for this session (from interim updates) clear it since the equivalent
+ # value was just added to the total.
+ if [ -e "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME-\$SESSIONID" ]; then
+ rm "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME-\$SESSIONID"
+ fi
+ echo "\$USEDOCTETS" > "/var/log/radacct/datacounter/\$TIMERANGE/used-octets-\$USERNAME"
+ fi
exit 0
fi
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 04:21:14 +0000