diff options
Diffstat (limited to 'config/apcupsd')
| -rw-r--r-- | config/apcupsd/apcupsd.conf.php | 362 | ||||
| -rw-r--r-- | config/apcupsd/apcupsd.inc | 191 | ||||
| -rw-r--r-- | config/apcupsd/apcupsd.xml | 333 | ||||
| -rwxr-xr-x | config/apcupsd/apcupsd_status.php | 118 |
4 files changed, 1004 insertions, 0 deletions
diff --git a/config/apcupsd/apcupsd.conf.php b/config/apcupsd/apcupsd.conf.php new file mode 100644 index 00000000..6a19b915 --- /dev/null +++ b/config/apcupsd/apcupsd.conf.php @@ -0,0 +1,362 @@ +<?php +/* + apcupsd.conf.php + part of the apcupsd package for pfSense + Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br> + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +*/ + +// create apcupsd.conf +$apcupsdconf=<<<EOF +## apcupsd.conf v1.1 ## +# +# for apcupsd release 3.14.10 (13 September 2011) - freebsd +# +# "apcupsd" POSIX config file + +# +# ========= General configuration parameters ============ +# + +# UPSNAME xxx +# Use this to give your UPS a name in log files and such. This +# is particulary useful if you have multiple UPSes. This does not +# set the EEPROM. It should be 8 characters or less. +UPSNAME {$upsname} + +# UPSCABLE <cable> +# Defines the type of cable connecting the UPS to your computer. +# +# Possible generic choices for <cable> are: +# simple, smart, ether, usb +# +# Or a specific cable model number may be used: +# 940-0119A, 940-0127A, 940-0128A, 940-0020B, +# 940-0020C, 940-0023A, 940-0024B, 940-0024C, +# 940-1524C, 940-0024G, 940-0095A, 940-0095B, +# 940-0095C, M-04-02-2000 +# +UPSCABLE {$upscable} + +# To get apcupsd to work, in addition to defining the cable +# above, you must also define a UPSTYPE, which corresponds to +# the type of UPS you have (see the Description for more details). +# You must also specify a DEVICE, sometimes referred to as a port. +# For USB UPSes, please leave the DEVICE directive blank. For +# other UPS types, you must specify an appropriate port or address. +# +# UPSTYPE DEVICE Description +# apcsmart /dev/tty** Newer serial character device, appropriate for +# SmartUPS models using a serial cable (not USB). +# +# usb <BLANK> Most new UPSes are USB. A blank DEVICE +# setting enables autodetection, which is +# the best choice for most installations. +# +# net hostname:port Network link to a master apcupsd through apcupsd's +# Network Information Server. This is used if the +# UPS powering your computer is connected to a +# different computer for monitoring. +# +# snmp hostname:port:vendor:community +# SNMP network link to an SNMP-enabled UPS device. +# Hostname is the ip address or hostname of the UPS +# on the network. Vendor can be can be "APC" or +# "APC_NOTRAP". "APC_NOTRAP" will disable SNMP trap +# catching; you usually want "APC". Port is usually +# 161. Community is usually "private". +# +# netsnmp hostname:port:vendor:community +# OBSOLETE +# Same as SNMP above but requires use of the +# net-snmp library. Unless you have a specific need +# for this old driver, you should use 'snmp' instead. +# +# dumb /dev/tty** Old serial character device for use with +# simple-signaling UPSes. +# +# pcnet ipaddr:username:passphrase:port +# PowerChute Network Shutdown protocol which can be +# used as an alternative to SNMP with the AP9617 +# family of smart slot cards. ipaddr is the IP +# address of the UPS management card. username and +# passphrase are the credentials for which the card +# has been configured. port is the port number on +# which to listen for messages from the UPS, normally +# 3052. If this parameter is empty or missing, the +# default of 3052 will be used. +# +UPSTYPE {$upstype} + +# POLLTIME <int> +# Interval (in seconds) at which apcupsd polls the UPS for status. This +# setting applies both to directly-attached UPSes (UPSTYPE apcsmart, usb, +# dumb) and networked UPSes (UPSTYPE net, snmp). Lowering this setting +# will improve apcupsd's responsiveness to certain events at the cost of +# higher CPU utilization. The default of 60 is appropriate for most +# situations. +POLLTIME {$polltime} + +# LOCKFILE <path to lockfile> +# Path for device lock file. Not used on Win32. +LOCKFILE /var/spool/lock + +# SCRIPTDIR <path to script directory> +# Directory in which apccontrol and event scripts are located. +SCRIPTDIR /usr/local/etc/apcupsd + +# PWRFAILDIR <path to powerfail directory> +# Directory in which to write the powerfail flag file. This file +# is created when apcupsd initiates a system shutdown and is +# checked in the OS halt scripts to determine if a killpower +# (turning off UPS output power) is required. +PWRFAILDIR /var/run + +# NOLOGINDIR <path to nologin directory> +# Directory in which to write the nologin file. The existence +# of this flag file tells the OS to disallow new logins. +NOLOGINDIR /var/run + + +# +# ======== Configuration parameters used during power failures ========== +# + +# The ONBATTERYDELAY is the time in seconds from when a power failure +# is detected until we react to it with an onbattery event. +# +# This means that, apccontrol will be called with the powerout argument +# immediately when a power failure is detected. However, the +# onbattery argument is passed to apccontrol only after the +# ONBATTERYDELAY time. If you don't want to be annoyed by short +# powerfailures, make sure that apccontrol powerout does nothing +# i.e. comment out the wall. +ONBATTERYDELAY {$onbatterydelay} + +# +# Note: BATTERYLEVEL, MINUTES, and TIMEOUT work in conjunction, so +# the first that occurs will cause the initation of a shutdown. +# + +# If during a power failure, the remaining battery percentage +# (as reported by the UPS) is below or equal to BATTERYLEVEL, +# apcupsd will initiate a system shutdown. +BATTERYLEVEL {$batterylevel} + +# If during a power failure, the remaining runtime in minutes +# (as calculated internally by the UPS) is below or equal to MINUTES, +# apcupsd, will initiate a system shutdown. +MINUTES {$minutes} + +# If during a power failure, the UPS has run on batteries for TIMEOUT +# many seconds or longer, apcupsd will initiate a system shutdown. +# A value of 0 disables this timer. +# +# Note, if you have a Smart UPS, you will most likely want to disable +# this timer by setting it to zero. That way, you UPS will continue +# on batteries until either the % charge remaing drops to or below BATTERYLEVEL, +# or the remaining battery runtime drops to or below MINUTES. Of course, +# if you are testing, setting this to 60 causes a quick system shutdown +# if you pull the power plug. +# If you have an older dumb UPS, you will want to set this to less than +# the time you know you can run on batteries. +TIMEOUT {$timeout} + +# Time in seconds between annoying users to signoff prior to +# system shutdown. 0 disables. +ANNOY {$annoy} + +# Initial delay after power failure before warning users to get +# off the system. +ANNOYDELAY {$annoydelay} + +# The condition which determines when users are prevented from +# logging in during a power failure. +# NOLOGON <string> [ disable | timeout | percent | minutes | always ] +NOLOGON disable + +# If KILLDELAY is non-zero, apcupsd will continue running after a +# shutdown has been requested, and after the specified time in +# seconds attempt to kill the power. This is for use on systems +# where apcupsd cannot regain control after a shutdown. +# KILLDELAY <seconds> 0 disables +KILLDELAY {$killdelay} + +# +# ==== Configuration statements for Network Information Server ==== +# + +# NETSERVER [ on | off ] on enables, off disables the network +# information server. If netstatus is on, a network information +# server process will be started for serving the STATUS and +# EVENT data over the network (used by CGI programs). +NETSERVER {$netserver} + +# NISIP <dotted notation ip address> +# IP address on which NIS server will listen for incoming connections. +# This is useful if your server is multi-homed (has more than one +# network interface and IP address). Default value is 0.0.0.0 which +# means any incoming request will be serviced. Alternatively, you can +# configure this setting to any specific IP address of your server and +# NIS will listen for connections only on that interface. Use the +# loopback address (127.0.0.1) to accept connections only from the +# local machine. +NISIP ${nisip} + +# NISPORT <port> default is 3551 as registered with the IANA +# port to use for sending STATUS and EVENTS data over the network. +# It is not used unless NETSERVER is on. If you change this port, +# you will need to change the corresponding value in the cgi directory +# and rebuild the cgi programs. +NISPORT ${nisport} + +# If you want the last few EVENTS to be available over the network +# by the network information server, you must define an EVENTSFILE. +EVENTSFILE /var/log/apcupsd.events + +# EVENTSFILEMAX <kilobytes> +# By default, the size of the EVENTSFILE will be not be allowed to exceed +# 10 kilobytes. When the file grows beyond this limit, older EVENTS will +# be removed from the beginning of the file (first in first out). The +# parameter EVENTSFILEMAX can be set to a different kilobyte value, or set +# to zero to allow the EVENTSFILE to grow without limit. +EVENTSFILEMAX 10 + +# +# ========== Configuration statements used if sharing ============= +# a UPS with more than one machine + +# +# Remaining items are for ShareUPS (APC expansion card) ONLY +# + +# UPSCLASS [ standalone | shareslave | sharemaster ] +# Normally standalone unless you share an UPS using an APC ShareUPS +# card. +UPSCLASS {$upsclass} + +# UPSMODE [ disable | share ] +# Normally disable unless you share an UPS using an APC ShareUPS card. +UPSMODE {$upsmode} + +# +# ===== Configuration statements to control apcupsd system logging ======== +# + +# Time interval in seconds between writing the STATUS file; 0 disables +STATTIME 0 + +# Location of STATUS file (written to only if STATTIME is non-zero) +STATFILE /var/log/apcupsd.status + +# LOGSTATS [ on | off ] on enables, off disables +# Note! This generates a lot of output, so if +# you turn this on, be sure that the +# file defined in syslog.conf for LOG_NOTICE is a named pipe. +# You probably do not want this on. +LOGSTATS off + +# Time interval in seconds between writing the DATA records to +# the log file. 0 disables. +DATATIME 0 + +# FACILITY defines the logging facility (class) for logging to syslog. +# If not specified, it defaults to "daemon". This is useful +# if you want to separate the data logged by apcupsd from other +# programs. +#FACILITY DAEMON + +# +# ========== Configuration statements used in updating the UPS EPROM ========= +# + +# +# These statements are used only by apctest when choosing "Set EEPROM with conf +# file values" from the EEPROM menu. THESE STATEMENTS HAVE NO EFFECT ON APCUPSD. +# + +# UPS name, max 8 characters +#UPSNAME UPS_IDEN + +# Battery date - 8 characters +#BATTDATE mm/dd/yy + +# Sensitivity to line voltage quality (H cause faster transfer to batteries) +# SENSITIVITY H M L (default = H) +#SENSITIVITY H + +# UPS delay after power return (seconds) +# WAKEUP 000 060 180 300 (default = 0) +#WAKEUP 60 + +# UPS Grace period after request to power off (seconds) +# SLEEP 020 180 300 600 (default = 20) +#SLEEP 180 + +# Low line voltage causing transfer to batteries +# The permitted values depend on your model as defined by last letter +# of FIRMWARE or APCMODEL. Some representative values are: +# D 106 103 100 097 +# M 177 172 168 182 +# A 092 090 088 086 +# I 208 204 200 196 (default = 0 => not valid) +#LOTRANSFER 208 + +# High line voltage causing transfer to batteries +# The permitted values depend on your model as defined by last letter +# of FIRMWARE or APCMODEL. Some representative values are: +# D 127 130 133 136 +# M 229 234 239 224 +# A 108 110 112 114 +# I 253 257 261 265 (default = 0 => not valid) +#HITRANSFER 253 + +# Battery charge needed to restore power +# RETURNCHARGE 00 15 50 90 (default = 15) +#RETURNCHARGE 15 + +# Alarm delay +# 0 = zero delay after pwr fail, T = power fail + 30 sec, L = low battery, N = never +# BEEPSTATE 0 T L N (default = 0) +#BEEPSTATE T + +# Low battery warning delay in minutes +# LOWBATT 02 05 07 10 (default = 02) +#LOWBATT 2 + +# UPS Output voltage when running on batteries +# The permitted values depend on your model as defined by last letter +# of FIRMWARE or APCMODEL. Some representative values are: +# D 115 +# M 208 +# A 100 +# I 230 240 220 225 (default = 0 => not valid) +#OUTPUTVOLTS 230 + +# Self test interval in hours 336=2 weeks, 168=1 week, ON=at power on +# SELFTEST 336 168 ON OFF (default = 336) +#SELFTEST 336 +EOF; +?> diff --git a/config/apcupsd/apcupsd.inc b/config/apcupsd/apcupsd.inc new file mode 100644 index 00000000..9abc23ba --- /dev/null +++ b/config/apcupsd/apcupsd.inc @@ -0,0 +1,191 @@ +<?php +/* $Id$ */ +/* ========================================================================== */ +/* + apcupsd.inc + part of the apcupsd package for pfSense + Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br> + + All rights reserved. + */ +/* ========================================================================== */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + */ +/* ========================================================================== */ +require_once("util.inc"); +require_once("functions.inc"); +require_once("pkg-utils.inc"); +require_once("globals.inc"); + +function php_install_apcupsd(){ + sync_package_apcupsd(); +} + +function php_deinstall_apcupsd(){ + global $config, $g; + + conf_mount_rw(); + $pfs_version = substr(trim(file_get_contents("/etc/version")),0,3); + if ($pfs_version > 2.0){ + define('APCUPSD_BASE', '/usr/pbi/apcupsd-' . php_uname("m")); + } else { + define('APCUPSD_BASE', '/usr/local'); + } + + exec("/usr/bin/killall apcupsd"); + unlink_if_exists(APCUPSD_BASE . "/etc/rc.d/apcupsd.sh"); + unlink_if_exists(APCUPSD_BASE . "/etc/apcupsd/apcupsd.conf"); + unlink_if_exists("/var/log/apcupsd/apcupsd.log"); + unlink_if_exists("/var/run/apcupsd/apcupsd.pid"); + + if (is_dir("/var/log/apcupsd")) + exec("/bin/rm -r /var/log/apcupsd/"); + if (is_dir("/var/run/apcupsd")) + exec("/bin/rm -r /var/run/apcupsd/"); + + conf_mount_ro(); +} + +function validate_input_apcupsd($post,&$input_errors){ + + if (isset($post['apcupsdenabled'])){ + + if ($post['polltime'] != '' && !is_numericint($post['polltime'])) { + $input_errors[]='Poll Time is not numeric.'; + } + + if ($post['onbatterydelay'] != '' && !is_numericint($post['onbatterydelay'])) { + $input_errors[]='OnBattery Delay is not numeric.'; + } + + if ($post['batterylevel'] != '' && !is_numericint($post['batterylevel'])) { + $input_errors[]='Battery Level is not numeric.'; + } + + if ($post['minutes'] != '' && !is_numericint($post['minutes'])) { + $input_errors[]='Minutes is not numeric.'; + } + + if ($post['timeout'] != '' && !is_numericint($post['timeout'])) { + $input_errors[]='Timeout is not numeric.'; + } + + if ($post['annoy'] != '' && !is_numericint($post['annoy'])) { + $input_errors[]='Annoy is not numeric.'; + } + + if ($post['annoydelay'] != '' && !is_numericint($post['annoydelay'])) { + $input_errors[]='Annoy Delay is not numeric.'; + } + + if ($post['killdelay'] != '' && !is_numericint($post['killdelay'])) { + $input_errors[]='Kill Delay is not numeric.'; + } + + if ($post['nisip'] != '') { + if (!is_ipaddr_configured($post['nisip']) && !preg_match("/(127.0.0.1|0.0.0.0)/",$post['nisip'])) { + $input_errors[]='NIS Ip is not a configured IP address.'; + } + } + + if ($post['nisport'] != '') { + if (!preg_match("/^\d+$/", $post['nisport'])) { + $input_errors[]='NIS Port is not numeric.'; + } + } + + } // apcupsdenabled +} + +function sync_package_apcupsd(){ + global $config, $g; + + conf_mount_rw(); + + // check pfsense version + $pfs_version = substr(trim(file_get_contents("/etc/version")),0,3); + if ($pfs_version > 2.0){ + define('APCUPSD_BASE', '/usr/pbi/apcupsd-' . php_uname("m")); + } + else { + define('APCUPSD_BASE', '/usr/local'); + } + + // check apcupsd settings + if (is_array($config['installedpackages']['apcupsd'])){ + $apcupsd_config = $config['installedpackages']['apcupsd']['config'][0]; + if ($apcupsd_config['apcupsdenabled']=="on"){ + $upsname=$apcupsd_config['upsname']; + $upscable=$apcupsd_config['upscable']; + $upstype=$apcupsd_config['upstype']; + $polltime=($apcupsd_config['polltime'] != ''? $apcupsd_config['polltime'] : "60"); + $onbatterydelay=($apcupsd_config['onbatterydelay'] != ''? $apcupsd_config['onbatterydelay'] : "6"); + $batterylevel=($apcupsd_config['batterylevel'] != ''? $apcupsd_config['batterylevel'] : "5"); + $minutes=($apcupsd_config['minutes'] != ''? $apcupsd_config['minutes'] : "3"); + $timeout=($apcupsd_config['timeout'] != ''? $apcupsd_config['timeout'] : "0"); + $annoy=($apcupsd_config['annoy'] != ''? $apcupsd_config['annoy'] : "300"); + $annoydelay=($apcupsd_config['annoydelay'] != ''? $apcupsd_config['annoydelay'] : "60"); + $killdelay=($apcupsd_config['killdelay'] != ''? $apcupsd_config['killdelay'] : "0"); + $netserver=$apcupsd_config['netserver']; + $nisip=($apcupsd_config['nisip'] != ''? $apcupsd_config['nisip'] : "0.0.0.0"); + $nisport=($apcupsd_config['nisport'] != ''? $apcupsd_config['nisport'] : "3551"); + $upsclass=$apcupsd_config['upsclass']; + $upsmode=$apcupsd_config['upsmode']; + + include("/usr/local/pkg/apcupsd.conf.php"); + file_put_contents(APCUPSD_BASE . "/etc/apcupsd/apcupsd.conf", $apcupsdconf, LOCK_EX); + } + } + + // RC FILE + $apcupsd_rcfile="/usr/local/etc/rc.d/apcupsd.sh"; + if (is_array($apcupsd_config) && $apcupsd_config['apcupsdenabled']=="on"){ + $apcupsd_start = "echo \"Starting APC UPS Daemon...\"\n"; + if ($apcupsd_config['killonpowerfail']=="on"){ + $apcupsd_start .= " " . APCUPSD_BASE . "/sbin/apcupsd --kill-on-powerfail"; + }else{ + $apcupsd_start .= " " . APCUPSD_BASE . "/sbin/apcupsd"; + } + + $apcupsd_stop = "echo \"Stopping APC UPS Daemon...\"\n"; + $apcupsd_stop .= " /usr/bin/killall apcupsd\n"; + $apcupsd_stop .= " /bin/sleep 5"; + + /* write out rc.d start/stop file */ + write_rcfile(array( + "file" => "apcupsd.sh", + "start" => "$apcupsd_start", + "stop" => "$apcupsd_stop" + ) + ); + mwexec("{$apcupsd_rcfile} restart"); + }else{ + if (file_exists($apcupsd_rcfile)){ + mwexec("{$apcupsd_rcfile} stop"); + unlink($apcupsd_rcfile); + } + } + + conf_mount_ro(); +} +?> diff --git a/config/apcupsd/apcupsd.xml b/config/apcupsd/apcupsd.xml new file mode 100644 index 00000000..8674af61 --- /dev/null +++ b/config/apcupsd/apcupsd.xml @@ -0,0 +1,333 @@ +<?xml version="1.0" encoding="utf-8"?> +<packagegui> +<copyright> + <![CDATA[ +/* $Id$ */ +/* ========================================================================== */ +/* + apcupsd.xml + part of the apcupsd package for pfSense + Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br> + + All rights reserved. + */ +/* ========================================================================== */ +/* + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + */ +/* ========================================================================== */ + ]]> + </copyright> + <name>Apcupsd</name> + <title>Services: Apcupsd (General)</title> + <category>Monitoring</category> + <version>0.1</version> + <include_file>/usr/local/pkg/apcupsd.inc</include_file> + <addedit_string>Apcupsd has been created/modified.</addedit_string> + <delete_string>Apcupsd has been deleted.</delete_string> + <restart_command>/usr/local/etc/rc.d/apcupsd.sh restart</restart_command> + <additional_files_needed> + <item>http://www.pfsense.org/packages/config/apcupsd/apcupsd.inc</item> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + </additional_files_needed> + <additional_files_needed> + <item>http://www.pfsense.org/packages/config/apcupsd/apcupsd_status.php</item> + <prefix>/usr/local/www/</prefix> + <chmod>0755</chmod> + </additional_files_needed> + <additional_files_needed> + <item>http://www.pfsense.org/packages/config/apcupsd/apcupsd.conf.php</item> + <prefix>/usr/local/pkg/</prefix> + <chmod>0755</chmod> + </additional_files_needed> + <menu> + <name>Apcupsd</name> + <tooltiptext>Setup Apcupsd specific settings</tooltiptext> + <section>Services</section> + <url>/pkg_edit.php?xml=apcupsd.xml&id=0</url> + </menu> + <service> + <name>apcupsd</name> + <rcfile>apcupsd.sh</rcfile> + <executable>apcupsd</executable> + <description>Apcupsd a daemon for controlling APC UPSes</description> + </service> + <tabs> + <tab> + <text>General</text> + <url>/pkg_edit.php?xml=apcupsd.xml&id=0</url> + <active/> + </tab> + <tab> + <text>Status</text> + <url>apcupsd_status.php</url> + </tab> + </tabs> + <fields> + <field> + <name>General configuration parameters</name> + <type>listtopic</type> + </field> + <field> + <fielddescr>Enable</fielddescr> + <fieldname>apcupsdenabled</fieldname> + <description>Enable APC UPS Daemon service</description> + <type>checkbox</type> + </field> + <field> + <fielddescr>UPS Name</fielddescr> + <fieldname>upsname</fieldname> + <description>Use this to give your UPS a name in log files and such</description> + <type>input</type> + <size>60</size> + <required>true</required> + </field> + <field> + <fielddescr>UPS Cable</fielddescr> + <fieldname>upscable</fieldname> + <description><![CDATA[Defines the type of cable connecting the UPS to your computer.<br> +<br> +Possible generic choices for <cable> are:<br> + simple, smart, ether, usb<br> +<br> +Or a specific cable model number may be used:<br> + 940-0119A, 940-0127A, 940-0128A, 940-0020B,<br> + 940-0020C, 940-0023A, 940-0024B, 940-0024C,<br> + 940-1524C, 940-0024G, 940-0095A, 940-0095B,<br> + 940-0095C, M-04-02-2000 + ]]></description> + <type>input</type> + <size>60</size> + <required>true</required> + </field> + <field> + <fielddescr>UPS Type / Device</fielddescr> + <fieldname>upstype</fieldname> + <description><![CDATA[To get apcupsd to work, in addition to defining the cable +above, you must also define a UPSTYPE, which corresponds to +the type of UPS you have (see the Description for more details). +You must also specify a DEVICE, sometimes referred to as a port. +For USB UPSes, please leave the DEVICE directive blank. For +other UPS types, you must specify an appropriate port or address.<br> +<br> +UPSTYPE DEVICE Description <br> +<br> +<strong>apcsmart /dev/tty**</strong> Newer serial character device, appropriate for + SmartUPS models using a serial cable (not USB).<br> +<br> +<strong>usb BLANK</strong> Most new UPSes are USB. A blank DEVICE + setting enables autodetection, which is + the best choice for most installations.<br> +<br> +<strong>net hostname:port</strong> Network link to a master apcupsd through apcupsd's + Network Information Server. This is used if the + UPS powering your computer is connected to a + different computer for monitoring.<br> +<br> +<strong>snmp hostname:port:vendor:community</strong> + SNMP network link to an SNMP-enabled UPS device. + Hostname is the ip address or hostname of the UPS + on the network. Vendor can be can be "APC" or + "APC_NOTRAP". "APC_NOTRAP" will disable SNMP trap + catching; you usually want "APC". Port is usually + 161. Community is usually "private".<br> +<br> +<strong>netsnmp hostname:port:vendor:community</strong> + OBSOLETE + Same as SNMP above but requires use of the + net-snmp library. Unless you have a specific need + for this old driver, you should use 'snmp' instead.<br> +<br> +<strong>dumb /dev/tty**</strong> Old serial character device for use with + simple-signaling UPSes.<br> +<br> +<strong>pcnet ipaddr:username:passphrase:port</strong> + PowerChute Network Shutdown protocol which can be + used as an alternative to SNMP with the AP9617 + family of smart slot cards. ipaddr is the IP + address of the UPS management card. username and + passphrase are the credentials for which the card + has been configured. port is the port number on + which to listen for messages from the UPS, normally + 3052. If this parameter is empty or missing, the + default of 3052 will be used.<br> +<br> + ]]></description> + <type>input</type> + <size>60</size> + <required>true</required> + </field> + <field> + <fielddescr>Poll Time</fielddescr> + <fieldname>polltime</fieldname> + <description>Interval (in seconds) at which apcupsd polls the UPS for status. Default is 60</description> + <type>input</type> + <size>10</size> + <default_value>60</default_value> + </field> + <field> + <fielddescr>Kill on Power Fail</fielddescr> + <fieldname>killonpowerfail</fieldname> + <description>Hibernate UPS on powerfail</description> + <type>checkbox</type> + </field> + <field> + <name>Configuration parameters used during power failures</name> + <type>listtopic</type> + </field> + <field> + <fielddescr>OnBattery Delay</fielddescr> + <fieldname>onbatterydelay</fieldname> + <description>Time in seconds from when a power failure is detected until we react to it with an onbattery event. Default is 6</description> + <type>input</type> + <size>10</size> + <default_value>6</default_value> + </field> + <field> + <fielddescr>Battery Level</fielddescr> + <fieldname>batterylevel</fieldname> + <description>If during a power failure, the remaining battery percentage (as reported by the UPS) is + below or equal to BATTERYLEVEL, apcupsd will initiate a system shutdown. Default is 5</description> + <type>input</type> + <size>10</size> + <default_value>5</default_value> + </field> + <field> + <fielddescr>Minutes</fielddescr> + <fieldname>minutes</fieldname> + <description>If during a power failure, the remaining runtime in minutes (as calculated internally + by the UPS) is below or equal to MINUTES, apcupsd, will initiate a system shutdown. Default is 3</description> + <type>input</type> + <size>10</size> + <default_value>3</default_value> + </field> + <field> + <fielddescr>Timeout</fielddescr> + <fieldname>timeout</fieldname> + <description>If during a power failure, the UPS has run on batteries for TIMEOUT many seconds + or longer, apcupsd will initiate a system shutdown. A value of 0 (default) disables this timer</description> + <type>input</type> + <size>10</size> + <default_value>0</default_value> + </field> + <field> + <fielddescr>Annoy</fielddescr> + <fieldname>annoy</fieldname> + <description>Time in seconds between annoying users to signoff prior to system shutdown. 0 disables. Default is 300</description> + <type>input</type> + <size>10</size> + <default_value>300</default_value> + </field> + <field> + <fielddescr>Annoy Delay</fielddescr> + <fieldname>annoydelay</fieldname> + <description>Initial delay after power failure before warning users to get off the system. Default is 60</description> + <type>input</type> + <size>10</size> + <default_value>60</default_value> + </field> + <field> + <fielddescr>Kill Delay</fielddescr> + <fieldname>killdelay</fieldname> + <description>If KILLDELAY is non-zero, apcupsd will continue running after a shutdown has been + requested, and after the specified time in seconds attempt to kill the power. This is for use + on systems where apcupsd cannot regain control after a shutdown. 0 disables (default)</description> + <type>input</type> + <size>10</size> + <default_value>0</default_value> + </field> + <field> + <name>Configuration statements for Network Information Server</name> + <type>listtopic</type> + </field> + <field> + <fielddescr>Net Server</fielddescr> + <fieldname>netserver</fieldname> + <description>If netstatus is on, a network information server process will be started for serving + the STATUS and EVENT data over the network (used by CGI programs)</description> + <type>select</type> + <default_value>on</default_value> + <options> + <option><name>On</name><value>on</value></option> + <option><name>Off</name><value>off</value></option> + </options> + </field> + <field> + <fielddescr>NIS Ip</fielddescr> + <fieldname>nisip</fieldname> + <description>IP address on which NIS server will listen for incoming connections. Default value is + 0.0.0.0 which means any incoming request will be serviced. Alternatively, you can configure this + setting to any specific IP address of your server and NIS will listen for connections only on that + interface. Use the loopback address (127.0.0.1) to accept connections only from the local machine</description> + <type>input</type> + <size>10</size> + <default_value>0.0.0.0</default_value> + </field> + <field> + <fielddescr>NIS Port</fielddescr> + <fieldname>nisport</fieldname> + <description>Port to use for sending STATUS and EVENTS data over the network. + It is not used unless NETSERVER is on. If you change this port, + you will need to change the corresponding value in the cgi directory + and rebuild the cgi programs. Default is 3551 as registered with the IANA</description> + <type>input</type> + <size>10</size> + <default_value>3551</default_value> + </field> + <field> + <name>Configuration statements used if sharing</name> + <type>listtopic</type> + </field> + <field> + <fielddescr>UPS Class</fielddescr> + <fieldname>upsclass</fieldname> + <description>Normally standalone unless you share an UPS using an APC ShareUPS card</description> + <type>select</type> + <default_value>standalone</default_value> + <options> + <option><name>Standalone</name><value>standalone</value></option> + <option><name>Share Master</name><value>sharemaster</value></option> + <option><name>Share Slave</name><value>shareslave</value></option> + </options> + </field> + <field> + <fielddescr>UPS Mode</fielddescr> + <fieldname>upsmode</fieldname> + <description>Normally disable unless you share an UPS using an APC ShareUPS card</description> + <type>select</type> + <default_value>disable</default_value> + <options> + <option><name>Disable</name><value>disable</value></option> + <option><name>Share</name><value>share</value></option> + </options> + </field> + </fields> + <custom_php_install_command>sync_package_apcupsd();</custom_php_install_command> + <custom_php_command_before_form></custom_php_command_before_form> + <custom_php_after_head_command></custom_php_after_head_command> + <custom_php_after_form_command></custom_php_after_form_command> + <custom_php_validation_command>validate_input_apcupsd($_POST, &$input_errors);</custom_php_validation_command> + <custom_add_php_command></custom_add_php_command> + <custom_php_resync_config_command>sync_package_apcupsd();</custom_php_resync_config_command> + <custom_php_deinstall_command>php_deinstall_apcupsd();</custom_php_deinstall_command> +</packagegui> diff --git a/config/apcupsd/apcupsd_status.php b/config/apcupsd/apcupsd_status.php new file mode 100755 index 00000000..e465f62c --- /dev/null +++ b/config/apcupsd/apcupsd_status.php @@ -0,0 +1,118 @@ +<?php +/* + apcupsd_status.php + part of pfSense (http://www.pfsense.com/) + Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br> + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +require("guiconfig.inc"); + +$pfSversion = str_replace("\n", "", file_get_contents("/etc/version")); + +if(strstr($pfSversion, "1.2")) + $one_two = true; + +$pgtitle = "Services: Apcupsd (Status)"; +include("head.inc"); + +function puts( $arg ) { echo "$arg\n"; } + +?> + +<style> +<!-- + +input { + font-family: courier new, courier; + font-weight: normal; + font-size: 9pt; +} + +pre { + border: 2px solid #435370; + background: #F0F0F0; + padding: 1em; + font-family: courier new, courier; + white-space: pre; + line-height: 10pt; + font-size: 10pt; +} + +.label { + font-family: tahoma, verdana, arial, helvetica; + font-size: 11px; + font-weight: bold; +} + +.button { + font-family: tahoma, verdana, arial, helvetica; + font-weight: bold; + font-size: 11px; +} + +--> +</style> +</head> +<body link="#0000CC" vlink="#0000CC" alink="#0000CC"> + + <?php include("fbegin.inc"); ?> + + <?php if($one_two): ?> + <p class="pgtitle"><?=$pgtitle?></font></p> + <?php endif; ?> + + +<div id="mainlevel"> + <table width="100%" border="0" cellpadding="0" cellspacing="0"> + <tr><td> + <?php + $tab_array = array(); + $tab_array[] = array(gettext("General"), false, "/pkg_edit.php?xml=apcupsd.xml&id=0"); + $tab_array[] = array(gettext("Status"), true, "/apcupsd_status.php"); + display_top_tabs($tab_array); + ?> + </td></tr> + </table> +</div> + +<div id="mainarea" style="padding-top: 0px; padding-bottom: 0px; "> + <table class="tabcont" width="100%" border="0" cellspacing="0" cellpadding="6"> + <tr><td> +<?php + puts("<pre>"); + putenv("PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin"); + $ph = popen('apcaccess 2>&1', "r" ); + while ($line = fgets($ph)) echo htmlspecialchars($line); + pclose($ph); + puts("</pre>"); +?> + </td></tr> + </table> +</div> +<?php +include("fend.inc"); +?> +</body> +</html> |