diff options
| -rw-r--r-- | packages/bandwidthd/bandwidthd.inc | 155 | ||||
| -rw-r--r-- | packages/bandwidthd/bandwidthd.xml | 89 | ||||
| -rw-r--r-- | pkg_config.xml | 14 |
3 files changed, 258 insertions, 0 deletions
diff --git a/packages/bandwidthd/bandwidthd.inc b/packages/bandwidthd/bandwidthd.inc new file mode 100644 index 00000000..45ddb457 --- /dev/null +++ b/packages/bandwidthd/bandwidthd.inc @@ -0,0 +1,155 @@ +<?php +/* $Id$ */ +/* + bandwidthd.inc + Copyright (C) 2006 Scott Ullrich + part of pfSense + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, + INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY + AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, + OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. +*/ + +function bandwidthd_install_config() { + + $meta_refresh = $config['installedpackages']['bandwidthd']['config'][0]['meta_refresh']; + if($meta_refresh) + $meta_refresh = "meta_refresh $meta_refresh\n"; + $graph = $config['installedpackages']['bandwidthd']['config'][0]['graph']; + if($graph) + $graph = "graph $meta_refresh\n"; + $filter = $config['installedpackages']['bandwidthd']['config'][0]['filter']; + if($filter) + $filter = "filter $meta_refresh\n"; + $recover_cdf = $config['installedpackages']['bandwidthd']['config'][0]['recover_cdf']; + if($recover_cdf) + $recover_cdf = "recover_cdf $meta_refresh\n"; + $output_cdf = $config['installedpackages']['bandwidthd']['config'][0]['output_cdf']; + if($output_cdf) + $output_cdf = "output_cdf $meta_refresh\n"; + $promiscuous = $config['installedpackages']['bandwidthd']['config'][0]['promiscuous']; + if($promiscuous) + $promiscuous = "promiscuous $meta_refresh\n"; + $graph_cutoff = $config['installedpackages']['bandwidthd']['config'][0]['graph_cutoff']; + if($graph_cutoff) + $graph_cutoff = "graph_cutoff $meta_refresh\n"; + $skip_intervals = $config['installedpackages']['bandwidthd']['config'][0]['skip_intervals']; + if($skip_intervals) + $skip_intervals = "skip_intervals $meta_refresh\n"; + + $subnets = ""; + $ifdescrs = array("lan", "wan"); + for ($j = 1; isset($config['interfaces']['opt' . $j]); $j++) { + $ifdescrs['opt' . $j] = "opt" . $j; + } + foreach($ifdescrs as $int) { + /* calculate interface subnet information */ + $ifcfg = &$config['interfaces'][$int]; + $subnet = gen_subnet($ifcfg['ipaddr'], $ifcfg['subnet']); + $subnetmask = gen_subnet_mask($ifcfg['subnet']); + if($subnet == "pppoe" or $subnet == "dhcp") { + $subnet = find_interface_ip("ng0"); + if($subnet) + $subnets .= "subnet \"{$subnet}\""; + } else { + $subnets .= "subnet \"{$subnet}/{$ifcfg['subnet']}\\n"; + } + } + + $dev = ""; + /* XXX: $dev "eth0" */ + foreach($ifdescrs as $ifdescr) { + $dev .= "dev \"$ifdescr\"\n"; + } + + $config_file = <<EOF +#################################################### +# Bandwidthd.conf +# +# Commented out options are here to provide +# documentation and represent defaults + +# Subnets to collect statistics on. Traffic that +# matches none of these subnets will be ignored. +# Syntax is either IP Subnet Mask or CIDR +$subnets + +# Device to listen on +# Bandwidthd listens on the first device it detects +# by default. Run "bandwidthd -l" for a list of +# devices. +$dev + +################################################### +# Options that don't usually get changed + +# An interval is 2.5 minutes, this is how many +# intervals to skip before doing a graphing run +$skip_inervals + +# Graph cutoff is how many k must be transfered by an +# ip before we bother to graph it +$graph_cutoff + +#Put interface in promiscuous mode to score to traffic +#that may not be routing through the host machine. +$promiscuous + +#Log data to cdf file htdocs/log.cdf +$output_cdf + +#Read back the cdf file on startup +$recover_cdf + +#Libpcap format filter string used to control what bandwidthd see's +#Please always include "ip" in the string to avoid strange problems +"$filter" + +#Draw Graphs - This default to true to graph the traffic bandwidthd is recording +#Usually set this to false if you only want cdf output or +#you are using the database output option. Bandwidthd will use very little +#ram and cpu if this is set to false. +$graph + +#Set META REFRESH seconds (default 150, use 0 to disable). +$meta_refresh + +EOF; + + $fd = fopen("/usr/local/bandwidthd/etc/bandwidthd.conf","w"); + if(!$fd) { + log_error("could not open /usr/local/bandwidthd/etc/bandwidthd.conf for writing"); + exit; + } + fwrite($fd, $config_file); + fclose($fd); + + /* write out rc.d start/stop file */ + write_rcfile(array( + "file" => "bandwidthd.sh", + "start" => "/usr/local/bandwidthd/bandwidthd /usr/local/bandwidth/etc/bandwidthd.conf", + "stop" => "/usr/bin/killall bandwidthd" + ) + ); + +} + +?>
\ No newline at end of file diff --git a/packages/bandwidthd/bandwidthd.xml b/packages/bandwidthd/bandwidthd.xml new file mode 100644 index 00000000..c74902ce --- /dev/null +++ b/packages/bandwidthd/bandwidthd.xml @@ -0,0 +1,89 @@ +<?xml version="1.0" encoding="utf-8" ?> +<packagegui> + <name>bandwidthd</name> + <version>1.0</version> + <configpath>installedpackages->package->bandwidthd</configpath> + <title>Bandwidthd</title> + <menu> + <name>Bandwidthd</name> + <tooltiptext></tooltiptext> + <section>Services</section> + <url>http://$myurl:3000</url> + </menu> + <tabs> + <tab> + <text>BandwidthD</text> + <url>/pkg_edit.php?xml=bandwidthd.xml&id=0</url> + <active/> + </tab> + </tabs> + <aftersaveredirect>/pkg_edit.php?xml=bandwidthd.xml&id=0</aftersaveredirect> + <additional_files_needed> + <prefix>/usr/local/pkg/</prefix> + <chmod>077</chmod> + <item>http://www.pfsense.com/packages/config/bandwidthd/bandwidthd.inc</item> + </additional_files_needed> + <custom_php_install_command> + bandwidthd_install_config(); + </custom_php_install_command> + <custom_php_deinstall_command> + </custom_php_deinstall_command> + <custom_php_resync_config_command> + </custom_php_resync_config_command> + <include_file>/usr/local/pkg/bandwidthd.inc</include_file> + <fields> + <field> + <fieldname>skipintervals</fieldname> + <fielddescr>Skip intervals</fielddescr> + <description></description> + <type>input</type> + <value>1024</value> + </field> + <field> + <fieldname>graphcutoff</fieldname> + <fielddescr>Graph cutoff</fielddescr> + <description>Graph cutoff is how many k must be transfered by an ip before we bother to graph it</description> + <type>input</type> + <value>1024</value> + </field> + <field> + <fieldname>promiscuous</fieldname> + <fielddescr>promiscuous</fielddescr> + <description>Put interface in promiscuous mode to score to traffic that may not be routing through the host machine.</description> + <type>checkbox</type> + </field> + <field> + <fieldname>output_cdf</fieldname> + <fielddescr>output_cdf</fielddescr> + <description>Log data to cdf file htdocs/log.cdf</description> + <type>checkbox</type> + </field> + <field> + <fieldname>recover_cdf</fieldname> + <fielddescr>recover_cdf</fielddescr> + <description>Read back the cdf file on startup</description> + <type>checkbox</type> + </field> + <field> + <fieldname>filter</fieldname> + <fielddescr>filter</fielddescr> + <description>Libpcap format filter string used to control what bandwidthd see's. Please always include "ip" in the string to avoid strange problems.</description> + <type>input</type> + <value>ip</value> + </field> + <field> + <fieldname>drawgraphs</fieldname> + <fielddescr>Draw Graphs</fielddescr> + <description>This default to true to graph the traffic bandwidthd is recording. Usually set this to false if you only want cdf output or you are using the database output option. Bandwidthd will use very little ram and cpu if this is set to false.</description> + <type>checkbox</type> + <value>checked</value> + </field> + <field> + <fieldname>meta_refresh</fieldname> + <fielddescr>Meta Refresh</fielddescr> + <description>Set META REFRESH seconds (default 150, use 0 to disable).</description> + <type>input</type> + <value>150</value> + </field> + </fields> +</packagegui> diff --git a/pkg_config.xml b/pkg_config.xml index 0099231e..c0b7fd89 100644 --- a/pkg_config.xml +++ b/pkg_config.xml @@ -399,6 +399,20 @@ <configurationfile>freeradius.xml</configurationfile> </package> <package> + <name>bandwidthd</name> + <website>http://bandwidthd.sourceforge.net/</website> + <descr></descr> + <category>System</category> + <version></version> + <status>BETA</status> + <required_version>2.0</required_version> + <maintainer></maintainer> + <depends_on_package_base_url>ftp://ftp2.freebsd.org/pub/FreeBSD/ports/i386/packages-6.2-release/All/</depends_on_package_base_url> + <depends_on_package>ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6.2-release/</depends_on_package> + <config_file>http://www.pfsense.org/packages/config/freeradius.xml</config_file> + <configurationfile>bandwidthd.xml</configurationfile> + </package> + <package> <name>stunnel</name> <website>http://www.stunnel.org/</website> <descr>The stunnel program is designed to work as an SSL encryption wrapper between remote client and local (inetd-startable) or remote servers. It can be used to add SSL functionality to commonly used inetd daemons like POP2, POP3, and IMAP servers without any changes in the program's code. It will negotiate an SSL connection using the OpenSSL or SSLeay libraries. It calls the underlying crypto libraries, allowing stunnel to support whatever cryptographic algorithms you compiled into your crypto package.</descr> |