mv packages to config dir to match web layout

1 files changed, 0 insertions, 1256 deletions

diff --git a/packages/freenas/pkg/freenas_disks.inc b/packages/freenas/pkg/freenas_disks.inc
deleted file mode 100644
index 0946164f..00000000
--- a/packages/freenas/pkg/freenas_disks.inc
+++ /dev/null
@@ -1,1256 +0,0 @@
-<?php
-/* $Id$ */
-/* ========================================================================== */
-/*
-    freenas_disks.inc
-    part of pfSense (http://www.pfSense.com)
-    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
-    All rights reserved.
-
-    Based on FreeNAS (http://www.freenas.org)
-    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
-    All rights reserved.
-
-    Based on m0n0wall (http://m0n0.ch/wall)
-    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
-    All rights reserved.
-                                                                              */
-/* ========================================================================== */
-/*
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions are met:
-
-     1. Redistributions of source code must retain the above copyright notice,
-        this list of conditions and the following disclaimer.
-
-     2. Redistributions in binary form must reproduce the above copyright
-        notice, this list of conditions and the following disclaimer in the
-        documentation and/or other materials provided with the distribution.
-
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
-    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
-    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
-    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-    POSSIBILITY OF SUCH DAMAGE.
-                                                                              */
-/* ========================================================================== */
-
-/* include all configuration functions */
-require_once("functions.inc");
-require_once("freenas_functions.inc");
-
-$freenas_config =& $config['installedpackages']['freenas']['config'][0];
-
-/* Mount all configured disks */
-function disks_mount_all() {
-  global $freenas_config, $g;
-
-  if ($g['booting'])
-    echo "Mounting Partitions... ";
-
-  /* For each device configured: */
-  if (is_array($freenas_config['mounts']['mount'])) {
-    foreach ($freenas_config['mounts']['mount'] as $mountent) {
-      /* Advanced Umount filesystem if not booting mode (mount edition) */
-      if (!$g['booting'])
-        disks_umount_adv($mountent);
-
-      /* mount filesystem */
-      disks_mount($mountent);
-    } // end foreach
-  } // end if
-
-  if ($g['booting'])
-    echo "done\n";
-
-  return 0;
-}
-
-/* Mount using the configured mount given in parameter
- * Return 0 if sucessful, 1 if error
- */
-function disks_mount($mount) {
-  global $freenas_config, $g;
-
-  /* Create one directory for each device under mnt */
-
-  $mountname=escapeshellcmd($mount['sharename']);
-
-  @mkdir ("/mnt/$mountname",0777);
-
-  /* mount the filesystems */
-  $devname=escapeshellcmd($mount['fullname']);
-
-  /* check the fileystem only if there is a problem*/
-  /* This part is too stupid: I must read the FreBSD 
-   * start script for use the same intelligent method 
-   * for checking hard drive
-   */
-  switch ($mount['fstype']) {
-    case "ufs":
-      if (mwexec("/sbin/mount -t ufs  -o acls $devname /mnt/$mountname") == 0) {
-        /* Change this directory into 777 mode */
-        mwexec("/bin/chmod 777 /mnt/$mountname");
-        $result = 0;
-      } else {
-        /* If it's NOK, Check  filesystem and do a fsck, answer Yes to all question*/
-        mwexec("/sbin/fsck -y -t ufs $devname");
-
-        /* Re-try to mount the partition */
-        if (mwexec("/sbin/mount -t ufs -o acls $devname /mnt/$mountname") == 0) {
-          /* Change this directory into 777 mode */
-          mwexec("/bin/chmod 777 /mnt/$mountname");
-          $result = 0;
-        } else {
-          /* Not OK, remove the directory, prevent writing on RAM disk*/
-          @rmdir ("/mnt/$mountname");
-          $result = 1;
-        } // end if
-      } // end if
-      break;
-    case "msdosfs":
-      if (mwexec("/sbin/mount_msdosfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
-        $result = 0;
-      } else {
-        exec("/sbin/fsck -y -t msdosfs {$devname}");
-        
-        if (mwexec("/sbin/mount_msdosfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
-          $result = 0;
-        } else {
-          /* Not OK, remove the directory, prevent writing on RAM disk*/
-          @rmdir ("/mnt/$mountname");
-          $result = 1;
-        }
-      }
-      break;
-    case "ntfs":
-      if (mwexec("/sbin/mount_ntfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
-        $result = 0;
-      } else {
-        /* Not OK, remove the directory, prevent writing on RAM disk */
-        @rmdir ("/mnt/$mountname");
-        $result = 1;
-      }
-      break;
-    case "ext2fs":
-      if (mwexec("/sbin/mount_ext2fs $devname /mnt/$mountname") == 0) {
-        /* Change this directory into 777 mode */
-        mwexec("/bin/chmod 777 /mnt/$mountname");
-        $result = 0;
-      } else {
-        exec("/usr/local/sbin/e2fsck -f -p {$devname}");
-        
-        if (mwexec("/sbin/mount_ext2fs $devname /mnt/$mountname") == 0) {
-          /* Change this directory into 777 mode */
-          mwexec("/bin/chmod 777 /mnt/$mountname");
-          $result = 0;
-        } else {
-          /* Not OK, remove the directory, prevent writing on RAM */
-          @rmdir ("/mnt/$mountname");
-          $result= 1;
-        }
-      }
-      break;
-  } // end switch
-
-  return $result;
-}
-
-/* Mount using fullname (/dev/ad0s1) given in parameter*/
-function disks_mount_fullname($fullname) {
-  global $freenas_config;
-
-  if (is_array($freenas_config['mounts']['mount'])) {
-    /* Search the mount list for given disk and partition */
-    foreach($freenas_config['mounts']['mount'] as $mountk => $mountv) {
-      if($mountv['fullname'] == $fullname) {
-        $mount = $mountv;
-      }
-    }
-  }
-
-  if($mount) {
-    $result= disks_mount($mount);
-  } else {
-    $result=0;
-  }
-
-  return $result;
-}
-
-/* Umount the specified configured mount point
- * Return 0 is successfull, 1 if error
- */
-function disks_umount($mount) {
-  global $freenas_config, $g;
-
-  /* Umout the specified mount point */
-  /* The $mount variable is the all config table for the mount point*/
-  $mountname=escapeshellcmd($mount['sharename']);
-
-  if (mwexec("/sbin/umount /mnt/$mountname") == 0) {
-    if (@rmdir ("/mnt/$mountname")) {
-      return 0;
-    } else {
-      return 1;
-    }
-  } else {
-    return 1;
-  }
-}
-
-/* Advanced unmount the specified mount point without using the sharename value
- * Used when changing the 'sharename': Need to umount the old unknow sharename
- * Return 0 if successful, 1 if error 
- */
-function disks_umount_fullname($fullname) {
-  global $freenas_config;
-
-  /* Search the mount list for given fullname */
-  foreach($freenas_config['mounts']['mount'] as $mountk => $mountv) {
-    if (strcmp($mountv['fullname'],$fullname) == 0) {
-      $mount = $mountv;
-    }
-  }
-
-  if($mount) {
-    $result = disks_umount($mount);
-  } else {
-    $result= 1;
-  }
-
-  return $result;
-}
-
-/* Advanced unmount the specified mount point without using the sharename value
- * Used when changing the 'sharename': Need to umount the old unknow sharename
- * Return 0 if successful, 1 if error 
- */
-function disks_umount_adv($mount)
-{
-  $fulname="{$mount['fullname']}";
-
-  // get the mount list
-  $detmount = get_mounts_list();
-
-  //Look for the mount point in all mounted point
-  foreach ($detmount as $detmountk => $detmountv) {
-    // If we found the mount point on the device
-    if (strcmp($detmountv['fullname'],$fullname) == 0) {
-      $mountname="{$detmountv['mp']}";
-    }
-  }
-
-  if ($mountname) {
-    exec("/sbin/umount $mountname");
-    @rmdir ("$mountname");
-    return 0;
-  } else {
-    $result = 1;
-  }
-
-  return $result;
-}
-
-function disks_mount_status($mount) {
-  // This option check if the mount are mounted
-  global $freenas_config, $g;
-  $detmount = get_mounts_list();
-  $status="ERROR";
-
-  // Recreate the full system name device+s+partition number
-  /* mount the filesystems */
-  $mountpart="{$mount['partition']}";
-
-  if ((strcmp($mountpart,"gvinum") == 0) || (strcmp($mountpart,"gmirror") == 0)) {
-    $complete = "{$mount['mdisk']}";
-  } else {
-    $complete = "{$mount['mdisk']}{$mount['partition']}";
-  }
-
-  //echo "debug, display complete: $complete <br>";
-
-  foreach ($detmount as $detmountk => $detmountv) {
-    //echo "debug, display detmountv[mdisk]: {$detmountv['mdisk']} <br>";
-        
-    if (strcmp($detmountv['mdisk'],$complete) == 0) {
-      $status="OK";
-      return $status;
-    }        
-  }
-
-  return $status;
-}
-
-/* This option check if this fullname (/dev/ad0s1) is mounted
- * Return 0 if not, 1 if yes
- */
-function disks_check_mount_fullname($fullname) {
-  $detmount = get_mounts_list();
-  $status=0;
-  //print_r($detmount);
-  
-  foreach ($detmount as $detmountk => $detmountv) {
-    if (strpos($detmountv['fullname'],$fullname) !== false) {
-      $status=1;
-      break;
-    }
-  }
-
-  return $status;
-}
-
-/* This option check if the configured mount is mounted. */
-function disks_check_mount($mount)
-{
-  return disks_check_mount_fullname($mount['fullname']);
-}
-
-/* This function check if the disk is mounted
- * Return 0 if not, 1 if yes 
- */
-function disks_check_mount_disk($disk) {
-  $detmount = get_mounts_list();
-  $status=0;
-
-  foreach ($detmount as $detmountk => $detmountv) {
-  /* Must found the $disk (ad0) in result $mdisk (ad0s1) */
-  // strpos will return 0 (found at position 0) if found, must check the 'false' value
-  if (strpos($detmountv['mdisk'], $disk) !== false ) {
-    $status=1;
-    break;
-  }
-}
-return $status;
-}
-
-/* This option check if the configured disk is online (detected by the system)
- * Result: "MISSING", disk don't detected by OS
- * Result: "ONLINE", disk is online
- * Result: "CHANGED", disk have changed (be replaced ?)
- */
-function disks_status($diskname) {
-  // This option check if the configured disk is online
-  global $freenas_config, $g;
-  $detectedlist = get_physical_disks_list();
-  $status="MISSING";
-  
-  foreach ($detectedlist as $detecteddisk => $detecteddiskv) {
-    if ($detecteddisk == $diskname['name']) {
-      $status="ONLINE";
-      if (($detecteddiskv['size'] != $diskname['size']) || ($detecteddiskv['desc'] != $diskname['desc'])) {
-        $status="CHANGED";
-      }
-      break;
-    }
-  }
-  
-  return $status;
-}
-
-function disks_addfstab($cfgdev,$cfgtype) {
-  global $freenas_config, $g;
-
-  /* Open or create fstab in RW */
-  $fd = fopen("{$g['etc_path']}/fstab", "w");
-
-  if ( $fd ) {
-    /* check for the precence of dev */
-    /* ADD (check if it's ADD line or replace) the line for the dev */
-    $fstab = "/dev/$cfgdev /mnt/$cfgdev $cfgtype rw 1 1\n";
-                
-    /* write out an fstab */
-    fwrite($fd, $fstab);
-
-    /* close file */
-    fclose($fd);
-  } else {
-    die( "fopen failed for {$g['etc_path']}/fstab" ) ;
-  }
-}
-
-function disks_umount_all() {
-  global $freenas_config, $g;
-
-  /* Sync disks*/
-  mwexec("/bin/sync");
-
-  if (is_array($freenas_config['mounts']['mount'])) {
-    foreach ($freenas_config['mounts']['mount'] as $mountent) {
-      /* Umount filesystem */
-      disks_umount($mountent);
-    }
-  }
-
-  return 0;
-}
-
-/* Configure, create and start gvinum volume */
-function disks_raid_gvinum_configure() {
-  global $freenas_config, $g;
-
-  /* Generate the raid.conf file */
-  if ($freenas_config['gvinum']['vdisk']) {
-
-    foreach ($freenas_config['gvinum']['vdisk'] as $a_raid_conf) {
-      if (file_exists($g['varrun_path'] . "/raid.conf.dirty") && 
-          !in_array("{$a_raid_conf['name']}\n", file($g['varrun_path'] . "/raid.conf.dirty"))) { continue; }
-        
-      /* generate raid.conf */
-      $fd = fopen("{$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf", "w");
-      if (!$fd) {
-        printf("Error: cannot open raid.conf in services_raid_configure().\n");
-        return 1;
-      }
-
-      $raidconf="";
-      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-        $raidconf .= <<<EOD
-drive disk_{$diskrv} device {$diskrv}
-
-EOD;
-      } // end foreach
-                 
-      $raidconf .= <<<EOD
-volume {$a_raid_conf['name']}
-
-EOD;
-
-      switch ($a_raid_conf['type']) {
-        case "0":
-          $raidconf .= <<<EOD
-plex org striped 256k
-
-EOD;
-
-          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-            /* Get the disksize */
-            $disksize=get_disks_size($diskrv);
-            /* Remove the ending 'B' in 'MB' */
-            $disksize=rtrim($disksize, 'B');
-            /*
-            $raidconf .= <<<EOD
-sd length {$disksize} drive disk_{$diskrv}
-
-EOD;
-*/
-                                                
-            $raidconf .= <<<EOD
-sd length 0 drive disk_{$diskrv}
-
-EOD;
-        
-          } // end foreach
-          break;
-        case "1":
-          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-            $raidconf .= <<<EOD
-plex org concat
-
-EOD;
-                                                
-            /* Get the disksize */
-            $disksize=get_disks_size($diskrv);
-            /* Remove the ending 'B' in 'MB' */
-            $disksize=rtrim($disksize, 'B');
-            /*
-            $raidconf .= <<<EOD
-sd length {$disksize} drive disk_{$diskrv}
-
-EOD;
-*/
-            $raidconf .= <<<EOD
-sd length 0 drive disk_{$diskrv}
-
-EOD;
-        
-          } // end foreach
-          break;
-        case "5":
-          $raidconf .= <<<EOD
-plex org raid5 256k
-
-EOD;
-
-          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-            /* Get the disksize */
-            $disksize=get_disks_size($diskrv);
-            /* Remove the ending 'B' in 'MB' */
-            $disksize=rtrim($disksize, 'B');
-            /*
-            $raidconf .= <<<EOD
-sd length {$disksize} drive disk_{$diskrv}
-
-EOD;
-*/
-
-            $raidconf .= <<<EOD
-sd length 0 drive disk_{$diskrv}
-
-EOD;
-        
-          } // end foreach
-          break;
-      } // end switch
-    
-      fwrite($fd, $raidconf);
-      fclose($fd);
-
-      /* Create each volume */        
-      mwexec("/sbin/gvinum create {$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf");        
-    } // end foreach
-                                        
-        
-    /* start each volume */
-        
-    foreach ($freenas_config['gvinum']['vdisk'] as $a_raid_conf) {
-      exec("/sbin/gvinum lv $raidname",$rawdata);
-    
-      if (strpos($rawdata[0],"State: up")>=0) { continue; }
-
-      mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
-    }        
-  } // end if
-
-  return 0;
-}
-
-function disks_raid_configure()
-{
-  global $freenas_config, $g;
-
-  /* Generate the raid.conf file */
-  if ($freenas_config['raid']['vdisk']) {        
-    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
-      if (file_exists($g['varrun_path'] . "/raid.conf.dirty") && 
-          ! in_array("{$a_raid_conf['name']}\n",file($g['varrun_path'] . "/raid.conf.dirty"))) { continue; }
-        
-      /* generate raid.conf */
-      $fd = fopen("{$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf", "w");
-      
-      if (!$fd) {
-        printf("Error: cannot open raid.conf in services_raid_configure().\n");
-        return 1;
-      }
-
-      $raidconf="";
-      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-        $raidconf .= <<<EOD
-drive disk_{$diskrv} device /dev/{$diskrv}s1a
-
-EOD;
-
-      } // end foreach
-
-      $raidconf .= <<<EOD
-volume {$a_raid_conf['name']}
-
-EOD;
-
-      switch ($a_raid_conf['type']) {
-        case "0":
-          $raidconf .= <<<EOD
-plex org striped 256k
-
-EOD;
-
-          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-            /* Get the disksize */
-            $disksize=get_disks_size($diskrv);
-            /* Remove the ending 'B' in 'MB' */
-            $disksize=rtrim($disksize, 'B');
-            /*
-            $raidconf .= <<<EOD
-sd length {$disksize} drive disk_{$diskrv}
-
-EOD;
-*/
-
-$raidconf .= <<<EOD
-sd length 0 drive disk_{$diskrv}
-
-EOD;
-
-          } // end foreach
-          break;
-        case "1":
-          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-            $raidconf .= <<<EOD
-plex org concat
-
-EOD;
-
-          /* Get the disksize */
-          $disksize=get_disks_size($diskrv);
-          /* Remove the ending 'B' in 'MB' */
-          $disksize=rtrim($disksize, 'B');
-          /*
-          $raidconf .= <<<EOD
-sd length {$disksize} drive disk_{$diskrv}
-
-EOD;
-*/
-
-          $raidconf .= <<<EOD
-sd length 0 drive disk_{$diskrv}
-
-EOD;
-
-          } // end foreach
-          break;
-        case "5":
-          $raidconf .= <<<EOD
-plex org raid5 256k
-
-EOD;
-
-          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-            /* Get the disksize */
-            $disksize=get_disks_size($diskrv);
-            /* Remove the ending 'B' in 'MB' */
-            $disksize=rtrim($disksize, 'B');
-            /*
-            $raidconf .= <<<EOD
-sd length {$disksize} drive disk_{$diskrv}
-
-EOD;
-*/
-
-            $raidconf .= <<<EOD
-sd length 0 drive disk_{$diskrv}
-
-EOD;
-
-          } // end foreach
-          break;
-      } // end switch
-      
-      fwrite($fd, $raidconf);
-      fclose($fd);
-
-      /* Create each volume */
-      mwexec("/sbin/gvinum create {$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf");
-    } // end foreach
-
-    /* start each volume */
-    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
-      exec("/sbin/gvinum lv $raidname",$rawdata);
-      if (strpos($rawdata[0],"State: up")>=0) { continue; }
-      mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
-    }
-  } // end if
-  
-  return 0;
-}
-
-/* Configure, create and start gmirror volume */
-function disks_raid_gmirror_configure() {
-  global $freenas_config, $g;
-
-  /* Create the gmirror device */
-  if ($freenas_config['gmirror']['vdisk']) {        
-    // Load gmirror
-    mwexec("/sbin/gmirror load");
-                        
-    foreach ($freenas_config['gmirror']['vdisk'] as $a_raid_conf) {
-      /* Create each volume */
-      $cmd = "/sbin/gmirror label -b {$a_raid_conf['balance']} {$a_raid_conf['name']} ";
-                
-      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-        $cmd .= "{$diskrv} ";
-      }
-        
-      mwexec($cmd);
-    }
-  }
-
-  return 0;
-}
-
-/* Configure, create and start gconcat volume */
-function disks_raid_gconcat_configure() {
-  global $freenas_config, $g;
-
-  if ($freenas_config['gconcat']['vdisk']) {
-    // Load gconcat
-    mwexec("/sbin/gconcat load");
-                        
-    foreach ($freenas_config['gconcat']['vdisk'] as $a_raid_conf) {
-      /* Create each volume */
-      $cmd = "/sbin/gconcat label {$a_raid_conf['name']} ";
-                
-      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-        $cmd .= "{$diskrv} ";
-      }
-        
-      mwexec($cmd);
-        
-    }
-  }
-
-  return 0;
-}
-
-/* Configure, create and start gstripe volume */
-function disks_raid_gstripe_configure() {
-  global $freenas_config, $g;
-
-  if ($freenas_config['gstripe']['vdisk']) {
-    // Load gstripe
-    mwexec("/sbin/gstripe load");
-
-    foreach ($freenas_config['gstripe']['vdisk'] as $a_raid_conf) {
-      /* Create each volume */
-      $cmd = "/sbin/gstripe label {$a_raid_conf['name']} ";
-
-      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-        $cmd .= "{$diskrv} ";
-      }
-
-      mwexec($cmd);
-    }
-  }
-
-  return 0;
-}
-
-/* Configure, create and start graid5 volume */
-
-function disks_raid_graid5_configure()
-{
-  global $freenas_config, $g;
-
-  if ($freenas_config['graid5']['vdisk']) {
-    /* Load graid5 */
-    mwexec("/sbin/graid5 load");
-
-    foreach ($freenas_config['graid5']['vdisk'] as $a_raid_conf) {
-      /* Create each volume */
-      $cmd = "/sbin/graid5 label -s 131072 {$a_raid_conf['name']} ";
-
-      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
-        $cmd .= "{$diskrv} ";
-      }
-
-      mwexec($cmd);
-    }
-  }
-
-  return 0;
-}
-
-function disks_raid_start() {
-  global $freenas_config, $g;
-
-  /* WARNING:  Must change this code for advanced RAID configuration ex: RAID1+0
-   * Geom RAID volume must be started in 'intelligent' sort, for RAID1+0, gmirror must
-   * be started before gstripe, etc... 
-   */
-  disks_raid_gvinum_start();
-  disks_raid_gmirror_start();
-  disks_raid_gstripe_start();
-  disks_raid_gconcat_start();
-  disks_raid_graid5_start();
-        
-  return 0;
-}
-
-
-function disks_raid_gvinum_start() {
-  global $freenas_config, $g;
-
-  /* Generate the raid.conf file */
-  if ($freenas_config['raid']['vdisk']) {
-    if ($g['booting'])
-      echo "Start gvinum raid... ";
-
-    /* start each volume */
-    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
-      mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
-    }
-        
-    if ($g['booting'])
-      echo "done\n";
-  }
-
-  return 0;
-}
-
-function disks_raid_gmirror_start() {
-  global $freenas_config, $g;
-
-  /* Start Geom mirror */
-  if ($freenas_config['gmirror']['vdisk']) {
-    if ($g['booting'])
-      echo "Start gmirror raid... ";
-
-    // Load geom mirror module        
-    mwexec("/sbin/gmirror load");
-        
-    if ($g['booting'])
-      echo "done\n";
-  }
-
-  return 0;
-}
-
-/* Start geom concat volumes */
-function disks_raid_gconcat_start() {
-  global $freenas_config, $g;
-
-/* Start Geom concat */
-  if ($freenas_config['gconcat']['vdisk']) {
-    if ($g['booting'])
-      echo "Start gconcat raid... ";
-
-    // Load geom concat module
-    mwexec("/sbin/gconcat load");
-        
-    if ($g['booting'])
-      echo "done\n";
-  }
-
-  return 0;
-}
-
-/* Start geom stripe volumes */
-function disks_raid_gstripe_start() {
-  global $freenas_config, $g;
-
-  /* Start Geom stripe */
-  if ($freenas_config['gstripe']['vdisk']) {
-    if ($g['booting'])
-      echo "Start gstripe raid... ";
-
-    // Load geom stripe module
-    mwexec("/sbin/gstripe load");
-        
-    if ($g['booting'])
-      echo "done\n";        
-  }
-
-  return 0;
-}
-
-/* Start geom raid5 volumes */
-function disks_raid_graid5_start() {
-  global $freenas_config, $g;
-
-  /* Start Geom RAID5 */
-  if ($freenas_config['graid5']['vdisk']) {
-    if ($g['booting'])
-      echo "Start graid5 raid... ";
-
-    // Load geom raid5 module
-    mwexec("/sbin/graid5 load");
-        
-    if ($g['booting'])
-      echo "done\n";
-  }
-
-  return 0;
-}
-
-function disks_raid_stop() {
-  /* WARNING:  Must change this code for advanced RAID configuration ex: RAID1+0
-   * Geom RAID volume must be started in 'intelligent' sort, for RAID1+0, gmirror must
-   * be started before gstripe, etc... 
-   */
-  disks_raid_gvinum_stop();
-  disks_raid_graid5_stop();
-  disks_raid_gstripe_stop();
-  disks_raid_gconcat_stop();
-  disks_raid_gmirror_stop();
-
-  return 0;
-}
-
-function disks_raid_gvinum_stop() {
-  global $freenas_config, $g;
-
-  /* Generate the raid.conf file */
-  if ($freenas_config['raid']['vdisk']) {
-    /* stop each volume */
-    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
-      mwexec("/sbin/gvinum stop {$a_raid_conf['name']}");
-    }
-  }
-
-  return 0;
-}
-
-function disks_raid_gmirror_stop() {
-  global $freenas_config, $g;
-
-  /* Generate the raid.conf file */
-  if ($freenas_config['gmirror']['vdisk']) {
-    /* start each volume */
-    foreach ($freenas_config['gmirror']['vdisk'] as $a_raid_conf) 	{
-      mwexec("/sbin/gmirror stop {$a_raid_conf['name']}");
-    }
-  }
-
-  return 0;
-}
-
-/* Stop all geom concat volumes */
-function disks_raid_gconcat_stop() {
-  global $freenas_config, $g;
-  
-  /* Stop geom concat */
-  if ($freenas_config['gconcat']['vdisk']) {
-    /* start each volume */
-    foreach ($freenas_config['gconcat']['vdisk'] as $a_raid_conf) {
-      mwexec("/sbin/gconcat stop {$a_raid_conf['name']}");   
-    }        
-  }
-
-  return 0;
-}
-
-/* Stop all geom stripe volumes */
-function disks_raid_gstripe_stop() {
-  global $freenas_config, $g;
-
-  /* Stop geom stripe */
-  if ($freenas_config['gstripe']['vdisk']) {
-    /* start each volume */
-    foreach ($freenas_config['gstripe']['vdisk'] as $a_raid_conf) {
-      mwexec("/sbin/gstripe stop {$a_raid_conf['name']}");
-    }    
-  }
-
-  return 0;
-}
-
-/* Stop all geom raid5 volumes */
-function disks_raid_graid5_stop() {
-  global $freenas_config, $g;
-
-  /* Generate the raid.conf file */
-  if ($freenas_config['graid5']['vdisk']) {
-    /* start each volume */
-    foreach ($freenas_config['graid5']['vdisk'] as $a_raid_conf) {
-      mwexec("/sbin/graid5 stop {$a_raid_conf['name']}");
-    }   
-  }
-
-  return 0;
-}
-
-
-/* Delete geom gvinum volume given in parameter */
-function disks_raid_gvinum_delete($raidname) {
-  global $freenas_config, $g;
-
-  exec("/sbin/gvinum lv $raidname",$rawdata);
-  
-  if (strpos($rawdata[0],"State: up") === false) {
-    return 0;
-  }
-
-  mwexec("/sbin/gvinum rm -r $raidname");
-
-  foreach ($freenas_config['gvinum']['vdisk'] as $a_raid) {
-    if ($a_raid['name'] == $raidname) {
-      foreach ($a_raid['diskr'] as $disk) {
-        mwexec("/sbin/gvinum rm -r disk_{$disk}");
-      }
-    }
-  }
-
-  return 0;
-}
-
-/* Delete geom mirror volume given in parameter */
-function disks_raid_gmirror_delete($raidname) {
-  global $freenas_config, $g;
-
-  // Stop the volume
-  mwexec("/sbin/gmirror stop $raidname");
-
-  // Clear the gmirror information on the hard drive
-  foreach ($freenas_config['gmirror']['vdisk'] as $a_raid) {
-    if ($a_raid['name'] == $raidname) {
-      foreach ($a_raid['diskr'] as $disk) {
-        mwexec("/sbin/gmirror clear {$disk}");
-      }
-    }
-  }
-
-  return 0;
-}
-
-/* Delete geom concat volume given in parameter */
-function disks_raid_gconcat_delete($raidname) {
-  global $freenas_config, $g;
-
-  // Stop the volume
-  mwexec("/sbin/gconcat stop $raidname");
-
-  // Clear the gconcat information on the hard drive
-  foreach ($freenas_config['gconcat']['vdisk'] as $a_raid) {
-    if ($a_raid['name'] == $raidname) {
-      foreach ($a_raid['diskr'] as $disk) {
-        mwexec("/sbin/gconcat clear {$disk}");
-      }
-      
-      mwexec("/sbin/gconcat destroy $raidname");
-    }
-  }
-
-  return 0;
-}
-
-/* Delete geom stripe volume given in parameter */
-function disks_raid_gstripe_delete($raidname) {
-  global $freenas_config, $g;
-
-  // Stop the volume
-  mwexec("/sbin/gstripe stop $raidname");
-
-  // Clear the gconcat information on the hard drive
-  foreach ($freenas_config['gstripe']['vdisk'] as $a_raid) {
-    if ($a_raid['name'] == $raidname) {
-      foreach ($a_raid['diskr'] as $disk) {
-        mwexec("/sbin/gstripe clear {$disk}");
-      }
-      
-      mwexec("/sbin/gstripe destroy $raidname");
-    }
-  }
-
-  return 0;
-}
-
-/* Delete geom raid5 volume given in parameter */
-function disks_raid_graid5_delete($raidname) {
-  global $freenas_config, $g;
-
-  // Stop the volume
-  mwexec("/sbin/graid5 stop $raidname");
-  
-  // The volume can disapear a few second after stop
-  sleep(2);
-
-  // Clear the graid5 information on the hard drive
-  foreach ($freenas_config['graid5']['vdisk'] as $a_raid) {
-    if ($a_raid['name'] == $raidname) {
-      foreach ($a_raid['diskr'] as $disk) {
-        mwexec("/sbin/graid5 remove $raidname {$disk}");
-      }
-    
-      mwexec("/sbin/graid5 destroy $raidname");
-    }
-  }
-
-  return 0;
-}
-
-/* Initialise HARD DRIVE for installing FreeNAS (creating 2 partition) */
-function fdisk_hd_install($harddrive) {
-  global $freenas_config, $g;
-
-  /* Initialise HARD DRIVE for installing FreeNAS (creating 2 partition) */
-
-  /* getting disk information */
-  $fdisk_info=fdisk_get_info($harddrive);
-
-  /* setting FreeNAS partition size to 32Mb */
-
-  $part_freenas_size=32;
-
-  /* convert Mb to b */
-  $part_freenas_size=$part_freenas_size * 1024 * 1024;
-
-  $part1_size=$part_freenas_size / $fdisk_info['sec_size'];
-  $part2_size=$fdisk_info['total'] - $part1_size;
-
-  /* Create fdisk config file */
-
-  /* generate fdisk.conf */
-  $fd = fopen("{$g['varetc_path']}/fdisk.conf", "w");
-  if (!$fd) {
-    printf("Error: cannot open fdisk.conf in fdisk_hd_install().\n");
-    return 1;
-  }
-        
-$fdiskconf .= <<<EOD
-g c{$fdisk_info['cyl']} h{$fdisk_info['head']} s{$fdisk_info['sect']}
-p 1 165 1 $part1_size
-p 2 165 $part1_size $part2_size
-p 3 0 0 0
-p 4 0 0 0
-a 1
-
-EOD;
-
-  fwrite($fd, $fdiskconf);
-  fclose($fd);
-
-  /* Fdisk the disk */
-
-  /* Warning: Ask two questions to the user */
-  mwexec("/sbin/fdisk -f {$g['varetc_path']}/fdisk.conf /dev/$harddrive");
-
-  return 0;
-}
-
-function fdisk_get_info($harddrive) {
-  /* Return information about an harddrive
-
-  $result['total'] : size
-  $result['cyl'] : cylinders
-  $result['head'] : heads
-  $result['sect'] :  sectors/track
-  $result['sec_size'] : Media sector size
-
-  */
-
-  global $freenas_config, $g;
-
-  exec("/sbin/fdisk /dev/$harddrive",$rawdata);
-
-  $result=array();
-
-  foreach ($rawdata as $line) {
-    /* separe the line by space or egal*/
-    $aline= preg_split("/[\s,]+|=/", $line);
-    $first_word = chop($aline[0]);
-        
-    if ($aline[0] == "Media") {
-      $result['sec_size']=chop($aline[4]);
-      continue ;
-    }
-        
-    if ($aline[0] == "cylinders") {
-      $result['cyl']=chop($aline[1]);
-      $result['head']=chop($aline[3]);
-      $result['sect']=chop($aline[5]);
-      continue ;
-    }
-  }
-
-  $result['total'] = $result['cyl'] * $result['head'] * $result['sect'] ;
-
-  return $result;
-}
-
-/* Is this function still used ??? */
-function disks_bsdlabel($harddrive,$partition,$type) {
-  global $freenas_config, $g;
-
-  // Generating BSD Label table
-  passthru("/sbin/bsdlabel " . escapeshellarg($harddrive) ."$partition > {$g['tmp_path']}/label.tmp");
-
-  // put this file on a array
-  $tableau = file("{$g['tmp_path']}/label.tmp");
-
-  // Open this file in add mode 
-  $handle = fopen("{$g['tmp_path']}/label.tmp", 'a');
-
-  while(list(,$val) = each($tableau)) {
-    // If the line contain the word "unused"
-    if (ereg ("unused",$val)) {
-      // Replacing c: by a:
-      // Why ??? Must found the web page where I see this method
-      $val = ereg_replace ("c:","a:", $val);
-      // Peplacing unused by $type
-      $val = ereg_replace ("unused",$type, $val);
-      // Adding this line add the end of the file
-      fwrite($handle, $val);
-    }
-  }
-  
-  // Closing file
-  fclose($handle);
-
-  // Injecting this new partition table 
-  passthru("/sbin/bsdlabel -R -B " . escapeshellarg($harddrive) ."$partition {$g['tmp_path']}/label.tmp");
-}
-
-
-function disks_set_ataidle() {
-  global $g, $freenas_config;
-
-  if (is_array($freenas_config['disks']['disk'])) {
-    foreach ($freenas_config['disks']['disk'] as $disk) {        
-      if ($disk['type']=="IDE") {
-        /* If UDMA mode forced, launch atacontrol */
-        if (isset($disk['udma']) && ($disk['udma'] != "auto")) {
-          mwexec("/sbin/atacontrol mode {$disk['name']}  {$disk['udma']}");
-        }
-                        
-        /* Don't use ataidle if all is disabled */
-        if (($disk['harddiskstandby'] == 0) && ($disk['apm'] == 0) && ($disk['acoustic'] == 0)) { continue; }
-                                
-        /* Found the channel and device number from the /dev name */
-        /* Divise the number by 2, the interger is the channel number, the rest is the device */
-                
-        $value=trim($disk['name'],'ad');
-                        
-        $value=intval($value);
-        $channel = $value/2;
-        $device=$value % 2;
-        $channel=intval($channel);
-        $time=$disk['harddiskstandby'];
-        $apm=$disk['apm'];
-        $ac=$disk['acoustic'];
-        
-        $cmd = "/usr/local/sbin/ataidle ";
-        
-        if ($disk['acoustic'] != 0) { $cmd .= "-A $ac  "; }
-        if ($disk['apm'] != 0) { $cmd .= "-P $apm "; }
-        if ($disk['harddiskstandby'] !=0) { $cmd .= "-S $time "; }
-        
-        $cmd .= "$channel $device";                
-        mwexec($cmd);        
-      } // end if
-    } // end foreach
-    
-    return 1;
-  } // end if
-                
-  return 0;
-}
-
-/* Is this function still used ???
-Get list of partition information from disk.
-Result is in the form:
-[1] => Array
-(
-  [start] => 31
-  [size]  => 409169
-  [type]  => 0xa5
-  [flags] => 0x80
-)
-
-Called in disks_manage_tools.php
-*/
-function disks_get_partition_info($disk) {  
-  exec("/sbin/fdisk -s {$disk}", $rawdata);
-  array_shift($rawdata);
-  array_shift($rawdata);
-
-  $result = array();
-
-  foreach($rawdata as $partinfo) {
-    $apartinfo = preg_split("/\s+/", $partinfo);
-    $partid = chop($apartinfo[1],":");
-
-    $result[$partid] = array();
-    $result[$partid]['start'] = chop($apartinfo[2]);
-    $result[$partid]['size']  = chop($apartinfo[3]);
-    $result[$partid]['type']  = chop($apartinfo[4]);
-    $result[$partid]['flags'] = chop($apartinfo[5]);
-  }
-
-  return $result;
-}
-
-?>