Merge pull request #560 from dbaio/master

New package Apcupsd. A daemon for controlling APC UPSes.

4 files changed, 1004 insertions, 0 deletions

diff --git a/config/apcupsd/apcupsd.conf.php b/config/apcupsd/apcupsd.conf.php
new file mode 100644
index 00000000..6a19b915
--- /dev/null
+++ b/config/apcupsd/apcupsd.conf.php
@@ -0,0 +1,362 @@
+<?php
+/*
+   apcupsd.conf.php
+   part of the apcupsd package for pfSense
+   Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br>
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   1. Redistributions of source code must retain the above copyright notice,
+      this list of conditions and the following disclaimer.
+
+   2. Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+
+   THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+   INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+   AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+   OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+// create apcupsd.conf
+$apcupsdconf=<<<EOF
+## apcupsd.conf v1.1 ##
+# 
+#  for apcupsd release 3.14.10 (13 September 2011) - freebsd
+#
+# "apcupsd" POSIX config file
+
+#
+# ========= General configuration parameters ============
+#
+
+# UPSNAME xxx
+#   Use this to give your UPS a name in log files and such. This
+#   is particulary useful if you have multiple UPSes. This does not
+#   set the EEPROM. It should be 8 characters or less.
+UPSNAME {$upsname}
+
+# UPSCABLE <cable>
+#   Defines the type of cable connecting the UPS to your computer.
+#
+#   Possible generic choices for <cable> are:
+#     simple, smart, ether, usb
+#
+#   Or a specific cable model number may be used:
+#     940-0119A, 940-0127A, 940-0128A, 940-0020B,
+#     940-0020C, 940-0023A, 940-0024B, 940-0024C,
+#     940-1524C, 940-0024G, 940-0095A, 940-0095B,
+#     940-0095C, M-04-02-2000
+#
+UPSCABLE {$upscable}
+
+# To get apcupsd to work, in addition to defining the cable
+# above, you must also define a UPSTYPE, which corresponds to
+# the type of UPS you have (see the Description for more details).
+# You must also specify a DEVICE, sometimes referred to as a port.
+# For USB UPSes, please leave the DEVICE directive blank. For
+# other UPS types, you must specify an appropriate port or address.
+#
+# UPSTYPE   DEVICE           Description
+# apcsmart  /dev/tty**       Newer serial character device, appropriate for 
+#                            SmartUPS models using a serial cable (not USB).
+#
+# usb       <BLANK>          Most new UPSes are USB. A blank DEVICE
+#                            setting enables autodetection, which is
+#                            the best choice for most installations.
+#
+# net       hostname:port    Network link to a master apcupsd through apcupsd's 
+#                            Network Information Server. This is used if the
+#                            UPS powering your computer is connected to a 
+#                            different computer for monitoring.
+#
+# snmp      hostname:port:vendor:community
+#                            SNMP network link to an SNMP-enabled UPS device.
+#                            Hostname is the ip address or hostname of the UPS 
+#                            on the network. Vendor can be can be "APC" or 
+#                            "APC_NOTRAP". "APC_NOTRAP" will disable SNMP trap 
+#                            catching; you usually want "APC". Port is usually 
+#                            161. Community is usually "private".
+#
+# netsnmp   hostname:port:vendor:community
+#                            OBSOLETE
+#                            Same as SNMP above but requires use of the 
+#                            net-snmp library. Unless you have a specific need
+#                            for this old driver, you should use 'snmp' instead.
+#
+# dumb      /dev/tty**       Old serial character device for use with 
+#                            simple-signaling UPSes.
+#
+# pcnet     ipaddr:username:passphrase:port
+#                            PowerChute Network Shutdown protocol which can be 
+#                            used as an alternative to SNMP with the AP9617 
+#                            family of smart slot cards. ipaddr is the IP 
+#                            address of the UPS management card. username and 
+#                            passphrase are the credentials for which the card 
+#                            has been configured. port is the port number on 
+#                            which to listen for messages from the UPS, normally 
+#                            3052. If this parameter is empty or missing, the 
+#                            default of 3052 will be used.
+#
+UPSTYPE {$upstype}
+
+# POLLTIME <int>
+#   Interval (in seconds) at which apcupsd polls the UPS for status. This
+#   setting applies both to directly-attached UPSes (UPSTYPE apcsmart, usb, 
+#   dumb) and networked UPSes (UPSTYPE net, snmp). Lowering this setting
+#   will improve apcupsd's responsiveness to certain events at the cost of
+#   higher CPU utilization. The default of 60 is appropriate for most
+#   situations.
+POLLTIME {$polltime}
+
+# LOCKFILE <path to lockfile>
+#   Path for device lock file. Not used on Win32.
+LOCKFILE /var/spool/lock
+
+# SCRIPTDIR <path to script directory>
+#   Directory in which apccontrol and event scripts are located.
+SCRIPTDIR /usr/local/etc/apcupsd
+
+# PWRFAILDIR <path to powerfail directory>
+#   Directory in which to write the powerfail flag file. This file
+#   is created when apcupsd initiates a system shutdown and is
+#   checked in the OS halt scripts to determine if a killpower
+#   (turning off UPS output power) is required.
+PWRFAILDIR /var/run
+
+# NOLOGINDIR <path to nologin directory>
+#   Directory in which to write the nologin file. The existence
+#   of this flag file tells the OS to disallow new logins.
+NOLOGINDIR /var/run
+
+
+#
+# ======== Configuration parameters used during power failures ==========
+#
+
+# The ONBATTERYDELAY is the time in seconds from when a power failure
+#   is detected until we react to it with an onbattery event.
+#
+#   This means that, apccontrol will be called with the powerout argument
+#   immediately when a power failure is detected.  However, the
+#   onbattery argument is passed to apccontrol only after the 
+#   ONBATTERYDELAY time.  If you don't want to be annoyed by short
+#   powerfailures, make sure that apccontrol powerout does nothing
+#   i.e. comment out the wall.
+ONBATTERYDELAY {$onbatterydelay}
+
+# 
+# Note: BATTERYLEVEL, MINUTES, and TIMEOUT work in conjunction, so
+# the first that occurs will cause the initation of a shutdown.
+#
+
+# If during a power failure, the remaining battery percentage
+# (as reported by the UPS) is below or equal to BATTERYLEVEL, 
+# apcupsd will initiate a system shutdown.
+BATTERYLEVEL {$batterylevel}
+
+# If during a power failure, the remaining runtime in minutes 
+# (as calculated internally by the UPS) is below or equal to MINUTES,
+# apcupsd, will initiate a system shutdown.
+MINUTES {$minutes}
+
+# If during a power failure, the UPS has run on batteries for TIMEOUT
+# many seconds or longer, apcupsd will initiate a system shutdown.
+# A value of 0 disables this timer.
+#
+#  Note, if you have a Smart UPS, you will most likely want to disable
+#    this timer by setting it to zero. That way, you UPS will continue
+#    on batteries until either the % charge remaing drops to or below BATTERYLEVEL,
+#    or the remaining battery runtime drops to or below MINUTES.  Of course,
+#    if you are testing, setting this to 60 causes a quick system shutdown
+#    if you pull the power plug.   
+#  If you have an older dumb UPS, you will want to set this to less than
+#    the time you know you can run on batteries.
+TIMEOUT {$timeout}
+
+#  Time in seconds between annoying users to signoff prior to
+#  system shutdown. 0 disables.
+ANNOY {$annoy}
+
+# Initial delay after power failure before warning users to get
+# off the system.
+ANNOYDELAY {$annoydelay}
+
+# The condition which determines when users are prevented from
+# logging in during a power failure.
+# NOLOGON <string> [ disable | timeout | percent | minutes | always ]
+NOLOGON disable
+
+# If KILLDELAY is non-zero, apcupsd will continue running after a
+# shutdown has been requested, and after the specified time in
+# seconds attempt to kill the power. This is for use on systems
+# where apcupsd cannot regain control after a shutdown.
+# KILLDELAY <seconds>  0 disables
+KILLDELAY {$killdelay}
+
+#
+# ==== Configuration statements for Network Information Server ====
+#
+
+# NETSERVER [ on | off ] on enables, off disables the network
+#  information server. If netstatus is on, a network information
+#  server process will be started for serving the STATUS and
+#  EVENT data over the network (used by CGI programs).
+NETSERVER {$netserver}
+
+# NISIP <dotted notation ip address>
+#  IP address on which NIS server will listen for incoming connections.
+#  This is useful if your server is multi-homed (has more than one
+#  network interface and IP address). Default value is 0.0.0.0 which
+#  means any incoming request will be serviced. Alternatively, you can
+#  configure this setting to any specific IP address of your server and 
+#  NIS will listen for connections only on that interface. Use the
+#  loopback address (127.0.0.1) to accept connections only from the
+#  local machine.
+NISIP ${nisip}
+
+# NISPORT <port> default is 3551 as registered with the IANA
+#  port to use for sending STATUS and EVENTS data over the network.
+#  It is not used unless NETSERVER is on. If you change this port,
+#  you will need to change the corresponding value in the cgi directory
+#  and rebuild the cgi programs.
+NISPORT ${nisport}
+
+# If you want the last few EVENTS to be available over the network
+# by the network information server, you must define an EVENTSFILE.
+EVENTSFILE /var/log/apcupsd.events
+
+# EVENTSFILEMAX <kilobytes>
+#  By default, the size of the EVENTSFILE will be not be allowed to exceed
+#  10 kilobytes.  When the file grows beyond this limit, older EVENTS will
+#  be removed from the beginning of the file (first in first out).  The
+#  parameter EVENTSFILEMAX can be set to a different kilobyte value, or set
+#  to zero to allow the EVENTSFILE to grow without limit.
+EVENTSFILEMAX 10
+
+#
+# ========== Configuration statements used if sharing =============
+#            a UPS with more than one machine
+
+#
+# Remaining items are for ShareUPS (APC expansion card) ONLY
+#
+
+# UPSCLASS [ standalone | shareslave | sharemaster ]
+#   Normally standalone unless you share an UPS using an APC ShareUPS
+#   card.
+UPSCLASS {$upsclass}
+
+# UPSMODE [ disable | share ]
+#   Normally disable unless you share an UPS using an APC ShareUPS card.
+UPSMODE {$upsmode}
+
+#
+# ===== Configuration statements to control apcupsd system logging ========
+#
+
+# Time interval in seconds between writing the STATUS file; 0 disables
+STATTIME 0
+
+# Location of STATUS file (written to only if STATTIME is non-zero)
+STATFILE /var/log/apcupsd.status
+
+# LOGSTATS [ on | off ] on enables, off disables
+# Note! This generates a lot of output, so if         
+#       you turn this on, be sure that the
+#       file defined in syslog.conf for LOG_NOTICE is a named pipe.
+#  You probably do not want this on.
+LOGSTATS off
+
+# Time interval in seconds between writing the DATA records to
+#   the log file. 0 disables.
+DATATIME 0
+
+# FACILITY defines the logging facility (class) for logging to syslog. 
+#          If not specified, it defaults to "daemon". This is useful 
+#          if you want to separate the data logged by apcupsd from other
+#          programs.
+#FACILITY DAEMON
+
+#
+# ========== Configuration statements used in updating the UPS EPROM =========
+#
+
+#
+# These statements are used only by apctest when choosing "Set EEPROM with conf
+# file values" from the EEPROM menu. THESE STATEMENTS HAVE NO EFFECT ON APCUPSD.
+#
+
+# UPS name, max 8 characters 
+#UPSNAME UPS_IDEN
+
+# Battery date - 8 characters
+#BATTDATE mm/dd/yy
+
+# Sensitivity to line voltage quality (H cause faster transfer to batteries)  
+# SENSITIVITY H M L        (default = H)
+#SENSITIVITY H
+
+# UPS delay after power return (seconds)
+# WAKEUP 000 060 180 300   (default = 0)
+#WAKEUP 60
+
+# UPS Grace period after request to power off (seconds)
+# SLEEP 020 180 300 600    (default = 20)
+#SLEEP 180
+
+# Low line voltage causing transfer to batteries
+# The permitted values depend on your model as defined by last letter 
+#  of FIRMWARE or APCMODEL. Some representative values are:
+#    D 106 103 100 097
+#    M 177 172 168 182
+#    A 092 090 088 086
+#    I 208 204 200 196     (default = 0 => not valid)
+#LOTRANSFER  208
+
+# High line voltage causing transfer to batteries
+# The permitted values depend on your model as defined by last letter 
+#  of FIRMWARE or APCMODEL. Some representative values are:
+#    D 127 130 133 136
+#    M 229 234 239 224
+#    A 108 110 112 114
+#    I 253 257 261 265     (default = 0 => not valid)
+#HITRANSFER 253
+
+# Battery charge needed to restore power
+# RETURNCHARGE 00 15 50 90 (default = 15)
+#RETURNCHARGE 15
+
+# Alarm delay 
+# 0 = zero delay after pwr fail, T = power fail + 30 sec, L = low battery, N = never
+# BEEPSTATE 0 T L N        (default = 0)
+#BEEPSTATE T
+
+# Low battery warning delay in minutes
+# LOWBATT 02 05 07 10      (default = 02)
+#LOWBATT 2
+
+# UPS Output voltage when running on batteries
+# The permitted values depend on your model as defined by last letter 
+#  of FIRMWARE or APCMODEL. Some representative values are:
+#    D 115
+#    M 208
+#    A 100
+#    I 230 240 220 225     (default = 0 => not valid)
+#OUTPUTVOLTS 230
+
+# Self test interval in hours 336=2 weeks, 168=1 week, ON=at power on
+# SELFTEST 336 168 ON OFF  (default = 336)
+#SELFTEST 336
+EOF;
+?>
diff --git a/config/apcupsd/apcupsd.inc b/config/apcupsd/apcupsd.inc
new file mode 100644
index 00000000..9abc23ba
--- /dev/null
+++ b/config/apcupsd/apcupsd.inc
@@ -0,0 +1,191 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    apcupsd.inc
+    part of the apcupsd package for pfSense
+    Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br>
+
+    All rights reserved.            
+			                                                                  */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+require_once("util.inc");
+require_once("functions.inc");
+require_once("pkg-utils.inc");
+require_once("globals.inc");
+
+function php_install_apcupsd(){
+	sync_package_apcupsd();	
+}
+
+function php_deinstall_apcupsd(){
+	global $config, $g;
+
+	conf_mount_rw();
+	$pfs_version = substr(trim(file_get_contents("/etc/version")),0,3);
+	if ($pfs_version > 2.0){
+		define('APCUPSD_BASE', '/usr/pbi/apcupsd-' . php_uname("m"));
+	} else {
+		define('APCUPSD_BASE', '/usr/local');
+	}
+
+	exec("/usr/bin/killall apcupsd");
+	unlink_if_exists(APCUPSD_BASE . "/etc/rc.d/apcupsd.sh");
+	unlink_if_exists(APCUPSD_BASE . "/etc/apcupsd/apcupsd.conf");
+	unlink_if_exists("/var/log/apcupsd/apcupsd.log");
+	unlink_if_exists("/var/run/apcupsd/apcupsd.pid");
+
+	if (is_dir("/var/log/apcupsd"))
+		exec("/bin/rm -r /var/log/apcupsd/");
+	if (is_dir("/var/run/apcupsd"))
+		exec("/bin/rm -r /var/run/apcupsd/");
+
+   conf_mount_ro();
+}
+
+function validate_input_apcupsd($post,&$input_errors){
+
+	if  (isset($post['apcupsdenabled'])){
+	
+		if ($post['polltime'] != '' && !is_numericint($post['polltime'])) {
+			$input_errors[]='Poll Time is not numeric.';
+		}
+
+		if ($post['onbatterydelay'] != '' && !is_numericint($post['onbatterydelay'])) {
+			$input_errors[]='OnBattery Delay is not numeric.';
+		}
+
+		if ($post['batterylevel'] != '' && !is_numericint($post['batterylevel'])) {
+			$input_errors[]='Battery Level is not numeric.';
+		}
+
+		if ($post['minutes'] != '' && !is_numericint($post['minutes'])) {
+			$input_errors[]='Minutes is not numeric.';
+		}
+
+		if ($post['timeout'] != '' && !is_numericint($post['timeout'])) {
+			$input_errors[]='Timeout is not numeric.';
+		}
+
+		if ($post['annoy'] != '' && !is_numericint($post['annoy'])) {
+			$input_errors[]='Annoy is not numeric.';
+		}
+
+		if ($post['annoydelay'] != '' && !is_numericint($post['annoydelay'])) {
+			$input_errors[]='Annoy Delay is not numeric.';
+		}
+
+		if ($post['killdelay'] != '' && !is_numericint($post['killdelay'])) {
+			$input_errors[]='Kill Delay is not numeric.';
+		}
+
+		if ($post['nisip'] != '') {
+			if (!is_ipaddr_configured($post['nisip']) && !preg_match("/(127.0.0.1|0.0.0.0)/",$post['nisip'])) {
+				$input_errors[]='NIS Ip is not a configured IP address.';
+			}
+		}
+
+		if ($post['nisport'] != '') {
+			if (!preg_match("/^\d+$/", $post['nisport'])) {
+				$input_errors[]='NIS Port is not numeric.';
+			}	
+		}
+
+	} // apcupsdenabled
+}
+
+function sync_package_apcupsd(){
+	global $config, $g;
+
+	conf_mount_rw();
+
+	// check pfsense version
+	$pfs_version = substr(trim(file_get_contents("/etc/version")),0,3);
+	if ($pfs_version > 2.0){
+		define('APCUPSD_BASE', '/usr/pbi/apcupsd-' . php_uname("m"));
+		}
+	else {
+		define('APCUPSD_BASE', '/usr/local');
+	}
+
+	// check apcupsd settings
+	if (is_array($config['installedpackages']['apcupsd'])){
+		$apcupsd_config = $config['installedpackages']['apcupsd']['config'][0];
+		if ($apcupsd_config['apcupsdenabled']=="on"){
+			$upsname=$apcupsd_config['upsname'];
+			$upscable=$apcupsd_config['upscable'];
+			$upstype=$apcupsd_config['upstype'];
+			$polltime=($apcupsd_config['polltime'] != ''? $apcupsd_config['polltime'] : "60");
+			$onbatterydelay=($apcupsd_config['onbatterydelay'] != ''? $apcupsd_config['onbatterydelay'] : "6");
+			$batterylevel=($apcupsd_config['batterylevel'] != ''? $apcupsd_config['batterylevel'] : "5");
+			$minutes=($apcupsd_config['minutes'] != ''? $apcupsd_config['minutes'] : "3");
+			$timeout=($apcupsd_config['timeout'] != ''? $apcupsd_config['timeout'] : "0");
+			$annoy=($apcupsd_config['annoy'] != ''? $apcupsd_config['annoy'] : "300");
+			$annoydelay=($apcupsd_config['annoydelay'] != ''? $apcupsd_config['annoydelay'] : "60"); 
+			$killdelay=($apcupsd_config['killdelay'] != ''? $apcupsd_config['killdelay'] : "0");
+			$netserver=$apcupsd_config['netserver'];
+			$nisip=($apcupsd_config['nisip'] != ''? $apcupsd_config['nisip'] : "0.0.0.0");
+			$nisport=($apcupsd_config['nisport'] != ''? $apcupsd_config['nisport'] : "3551");
+			$upsclass=$apcupsd_config['upsclass'];
+			$upsmode=$apcupsd_config['upsmode'];
+	
+			include("/usr/local/pkg/apcupsd.conf.php");
+			file_put_contents(APCUPSD_BASE . "/etc/apcupsd/apcupsd.conf", $apcupsdconf, LOCK_EX);
+		}
+	}
+
+	// RC FILE	
+	$apcupsd_rcfile="/usr/local/etc/rc.d/apcupsd.sh";
+	if (is_array($apcupsd_config) && $apcupsd_config['apcupsdenabled']=="on"){
+		$apcupsd_start = "echo \"Starting APC UPS Daemon...\"\n";
+		if ($apcupsd_config['killonpowerfail']=="on"){
+			$apcupsd_start .= "	" . APCUPSD_BASE . "/sbin/apcupsd --kill-on-powerfail";
+		}else{
+			$apcupsd_start .= "	" . APCUPSD_BASE . "/sbin/apcupsd";
+		}
+	
+		$apcupsd_stop  = "echo \"Stopping APC UPS Daemon...\"\n";
+		$apcupsd_stop .= "	/usr/bin/killall apcupsd\n";
+		$apcupsd_stop .= "	/bin/sleep 5";
+	
+		/* write out rc.d start/stop file */
+		write_rcfile(array(
+						"file" => "apcupsd.sh",
+						"start" => "$apcupsd_start",
+						"stop" => "$apcupsd_stop"
+				)
+		);
+		mwexec("{$apcupsd_rcfile} restart");	
+	}else{
+		if (file_exists($apcupsd_rcfile)){
+			mwexec("{$apcupsd_rcfile} stop");
+			unlink($apcupsd_rcfile);
+		}
+	}
+		
+	conf_mount_ro();
+}
+?>
diff --git a/config/apcupsd/apcupsd.xml b/config/apcupsd/apcupsd.xml
new file mode 100644
index 00000000..8674af61
--- /dev/null
+++ b/config/apcupsd/apcupsd.xml
@@ -0,0 +1,333 @@
+<?xml version="1.0" encoding="utf-8"?>
+<packagegui>
+<copyright>
+	<![CDATA[
+/* $Id$ */
+/* ========================================================================== */
+/*
+    apcupsd.xml
+    part of the apcupsd package for pfSense
+    Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br>
+	
+    All rights reserved.            
+			                                                                  */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+	]]>
+	</copyright>
+	<name>Apcupsd</name>
+	<title>Services: Apcupsd (General)</title>
+	<category>Monitoring</category>
+	<version>0.1</version>
+	<include_file>/usr/local/pkg/apcupsd.inc</include_file>
+	<addedit_string>Apcupsd has been created/modified.</addedit_string>
+	<delete_string>Apcupsd has been deleted.</delete_string>
+	<restart_command>/usr/local/etc/rc.d/apcupsd.sh restart</restart_command>
+	<additional_files_needed>
+		<item>http://www.pfsense.org/packages/config/apcupsd/apcupsd.inc</item>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+	</additional_files_needed>
+	<additional_files_needed>
+		<item>http://www.pfsense.org/packages/config/apcupsd/apcupsd_status.php</item>
+		<prefix>/usr/local/www/</prefix>
+		<chmod>0755</chmod>
+	</additional_files_needed>
+	<additional_files_needed>
+		<item>http://www.pfsense.org/packages/config/apcupsd/apcupsd.conf.php</item>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+	</additional_files_needed>
+	<menu>
+		<name>Apcupsd</name>
+		<tooltiptext>Setup Apcupsd specific settings</tooltiptext>
+		<section>Services</section>
+		<url>/pkg_edit.php?xml=apcupsd.xml&amp;id=0</url>
+	</menu>
+	<service>
+		<name>apcupsd</name>
+		<rcfile>apcupsd.sh</rcfile>
+		<executable>apcupsd</executable>
+		<description>Apcupsd a daemon for controlling APC UPSes</description>
+	</service>
+	<tabs>
+		<tab>
+			<text>General</text>
+			<url>/pkg_edit.php?xml=apcupsd.xml&amp;id=0</url>
+			<active/>
+		</tab>
+		<tab>
+			<text>Status</text>
+			<url>apcupsd_status.php</url>
+		</tab>
+	</tabs>
+	<fields>
+		<field>
+			<name>General configuration parameters</name>
+			<type>listtopic</type>
+		</field>
+		<field>
+			<fielddescr>Enable</fielddescr>
+			<fieldname>apcupsdenabled</fieldname>
+			<description>Enable APC UPS Daemon service</description>
+			<type>checkbox</type>
+		</field>
+		<field>
+			<fielddescr>UPS Name</fielddescr>
+			<fieldname>upsname</fieldname>
+			<description>Use this to give your UPS a name in log files and such</description>
+         <type>input</type>
+         <size>60</size>
+			<required>true</required>
+		</field>
+		<field>
+			<fielddescr>UPS Cable</fielddescr>
+			<fieldname>upscable</fieldname>
+			<description><![CDATA[Defines the type of cable connecting the UPS to your computer.<br>
+<br>
+Possible generic choices for <cable> are:<br>
+  simple, smart, ether, usb<br>
+<br>
+Or a specific cable model number may be used:<br>
+  940-0119A, 940-0127A, 940-0128A, 940-0020B,<br>
+  940-0020C, 940-0023A, 940-0024B, 940-0024C,<br>
+  940-1524C, 940-0024G, 940-0095A, 940-0095B,<br>
+  940-0095C, M-04-02-2000
+			]]></description>
+         <type>input</type>
+         <size>60</size>
+			<required>true</required>
+		</field>
+		<field>
+			<fielddescr>UPS Type / Device</fielddescr>
+			<fieldname>upstype</fieldname>
+			<description><![CDATA[To get apcupsd to work, in addition to defining the cable
+above, you must also define a UPSTYPE, which corresponds to
+the type of UPS you have (see the Description for more details).
+You must also specify a DEVICE, sometimes referred to as a port.
+For USB UPSes, please leave the DEVICE directive blank. For
+other UPS types, you must specify an appropriate port or address.<br>
+<br>
+UPSTYPE   DEVICE           Description <br>
+<br>
+<strong>apcsmart  /dev/tty**</strong>       Newer serial character device, appropriate for
+                           SmartUPS models using a serial cable (not USB).<br>
+<br>
+<strong>usb       BLANK</strong>          Most new UPSes are USB. A blank DEVICE
+                           setting enables autodetection, which is
+                           the best choice for most installations.<br>
+<br>
+<strong>net       hostname:port</strong>    Network link to a master apcupsd through apcupsd's
+                           Network Information Server. This is used if the
+                           UPS powering your computer is connected to a
+                           different computer for monitoring.<br>
+<br>
+<strong>snmp      hostname:port:vendor:community</strong>
+                           SNMP network link to an SNMP-enabled UPS device.
+                           Hostname is the ip address or hostname of the UPS
+                           on the network. Vendor can be can be "APC" or
+                           "APC_NOTRAP". "APC_NOTRAP" will disable SNMP trap
+                           catching; you usually want "APC". Port is usually
+                           161. Community is usually "private".<br>
+<br>
+<strong>netsnmp   hostname:port:vendor:community</strong>
+                           OBSOLETE
+                           Same as SNMP above but requires use of the
+                           net-snmp library. Unless you have a specific need
+                           for this old driver, you should use 'snmp' instead.<br>
+<br>
+<strong>dumb      /dev/tty**</strong>       Old serial character device for use with
+                           simple-signaling UPSes.<br>
+<br>
+<strong>pcnet     ipaddr:username:passphrase:port</strong>
+                           PowerChute Network Shutdown protocol which can be
+                           used as an alternative to SNMP with the AP9617
+                           family of smart slot cards. ipaddr is the IP
+                           address of the UPS management card. username and
+                           passphrase are the credentials for which the card
+                           has been configured. port is the port number on
+                           which to listen for messages from the UPS, normally
+                           3052. If this parameter is empty or missing, the
+                           default of 3052 will be used.<br>
+<br>
+			]]></description>
+         <type>input</type>
+         <size>60</size>
+			<required>true</required>
+		</field>
+		<field>
+			<fielddescr>Poll Time</fielddescr>
+			<fieldname>polltime</fieldname>
+			<description>Interval (in seconds) at which apcupsd polls the UPS for status. Default is 60</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>60</default_value>
+		</field>
+		<field>
+			<fielddescr>Kill on Power Fail</fielddescr>
+			<fieldname>killonpowerfail</fieldname>
+			<description>Hibernate UPS on powerfail</description>
+			<type>checkbox</type>
+		</field>
+		<field>
+			<name>Configuration parameters used during power failures</name>
+			<type>listtopic</type>
+		</field>
+		<field>
+			<fielddescr>OnBattery Delay</fielddescr>
+			<fieldname>onbatterydelay</fieldname>
+			<description>Time in seconds from when a power failure is detected until we react to it with an onbattery event. Default is 6</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>6</default_value>
+		</field>
+		<field>
+			<fielddescr>Battery Level</fielddescr>
+			<fieldname>batterylevel</fieldname>
+			<description>If during a power failure, the remaining battery percentage (as reported by the UPS) is 
+			below or equal to BATTERYLEVEL, apcupsd will initiate a system shutdown. Default is 5</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>5</default_value>
+		</field>
+		<field>
+			<fielddescr>Minutes</fielddescr>
+			<fieldname>minutes</fieldname>
+			<description>If during a power failure, the remaining runtime in minutes (as calculated internally 
+			by the UPS) is below or equal to MINUTES, apcupsd, will initiate a system shutdown. Default is 3</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>3</default_value>
+		</field>
+		<field>
+			<fielddescr>Timeout</fielddescr>
+			<fieldname>timeout</fieldname>
+			<description>If during a power failure, the UPS has run on batteries for TIMEOUT many seconds 
+			or longer, apcupsd will initiate a system shutdown. A value of 0 (default) disables this timer</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>0</default_value>
+		</field>
+		<field>
+			<fielddescr>Annoy</fielddescr>
+			<fieldname>annoy</fieldname>
+			<description>Time in seconds between annoying users to signoff prior to system shutdown. 0 disables. Default is 300</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>300</default_value>
+		</field>
+		<field>
+			<fielddescr>Annoy Delay</fielddescr>
+			<fieldname>annoydelay</fieldname>
+			<description>Initial delay after power failure before warning users to get off the system. Default is 60</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>60</default_value>
+		</field>
+		<field>
+			<fielddescr>Kill Delay</fielddescr>
+			<fieldname>killdelay</fieldname>
+			<description>If KILLDELAY is non-zero, apcupsd will continue running after a shutdown has been 
+			requested, and after the specified time in seconds attempt to kill the power. This is for use 
+			on systems where apcupsd cannot regain control after a shutdown. 0 disables (default)</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>0</default_value>
+		</field>
+		<field>
+			<name>Configuration statements for Network Information Server</name>
+			<type>listtopic</type>
+		</field>
+		<field>
+			<fielddescr>Net Server</fielddescr>
+			<fieldname>netserver</fieldname>
+			<description>If netstatus is on, a network information server process will be started for serving 
+			the STATUS and EVENT data over the network (used by CGI programs)</description>
+			<type>select</type>
+			<default_value>on</default_value>
+			<options>
+				<option><name>On</name><value>on</value></option>
+				<option><name>Off</name><value>off</value></option>
+			</options>
+		</field>
+		<field>
+			<fielddescr>NIS Ip</fielddescr>
+			<fieldname>nisip</fieldname>
+			<description>IP address on which NIS server will listen for incoming connections. Default value is 
+			0.0.0.0 which means any incoming request will be serviced. Alternatively, you can configure this 
+			setting to any specific IP address of your server and NIS will listen for connections only on that 
+			interface. Use the loopback address (127.0.0.1) to accept connections only from the local machine</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>0.0.0.0</default_value>
+		</field>
+		<field>
+			<fielddescr>NIS Port</fielddescr>
+			<fieldname>nisport</fieldname>
+			<description>Port to use for sending STATUS and EVENTS data over the network.
+			It is not used unless NETSERVER is on. If you change this port,
+			you will need to change the corresponding value in the cgi directory
+			and rebuild the cgi programs. Default is 3551 as registered with the IANA</description>
+         <type>input</type>
+         <size>10</size>
+			<default_value>3551</default_value>
+		</field>
+		<field>
+			<name>Configuration statements used if sharing</name>
+			<type>listtopic</type>
+		</field>
+		<field>
+			<fielddescr>UPS Class</fielddescr>
+			<fieldname>upsclass</fieldname>
+			<description>Normally standalone unless you share an UPS using an APC ShareUPS card</description>
+			<type>select</type>
+			<default_value>standalone</default_value>
+			<options>
+				<option><name>Standalone</name><value>standalone</value></option>
+				<option><name>Share Master</name><value>sharemaster</value></option>
+				<option><name>Share Slave</name><value>shareslave</value></option>
+			</options>
+		</field>
+		<field>
+			<fielddescr>UPS Mode</fielddescr>
+			<fieldname>upsmode</fieldname>
+			<description>Normally disable unless you share an UPS using an APC ShareUPS card</description>
+			<type>select</type>
+			<default_value>disable</default_value>
+			<options>
+				<option><name>Disable</name><value>disable</value></option>
+				<option><name>Share</name><value>share</value></option>
+			</options>
+		</field>
+	</fields>
+	<custom_php_install_command>sync_package_apcupsd();</custom_php_install_command>
+	<custom_php_command_before_form></custom_php_command_before_form>
+	<custom_php_after_head_command></custom_php_after_head_command>
+	<custom_php_after_form_command></custom_php_after_form_command>
+	<custom_php_validation_command>validate_input_apcupsd($_POST, &amp;$input_errors);</custom_php_validation_command>
+	<custom_add_php_command></custom_add_php_command>
+	<custom_php_resync_config_command>sync_package_apcupsd();</custom_php_resync_config_command>
+	<custom_php_deinstall_command>php_deinstall_apcupsd();</custom_php_deinstall_command>
+</packagegui>
diff --git a/config/apcupsd/apcupsd_status.php b/config/apcupsd/apcupsd_status.php
new file mode 100755
index 00000000..e465f62c
--- /dev/null
+++ b/config/apcupsd/apcupsd_status.php
@@ -0,0 +1,118 @@
+<?php
+/*
+	apcupsd_status.php
+	part of pfSense (http://www.pfsense.com/)
+	Copyright (C) 2013 Danilo G. Baio <dbaio@bsd.com.br>
+	All rights reserved.
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are met:
+
+	1. Redistributions of source code must retain the above copyright notice,
+	   this list of conditions and the following disclaimer.
+
+	2. Redistributions in binary form must reproduce the above copyright
+	   notice, this list of conditions and the following disclaimer in the
+	   documentation and/or other materials provided with the distribution.
+
+	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+	POSSIBILITY OF SUCH DAMAGE.
+*/
+
+require("guiconfig.inc");
+
+$pfSversion = str_replace("\n", "", file_get_contents("/etc/version"));
+
+if(strstr($pfSversion, "1.2"))
+	$one_two = true;
+	
+$pgtitle = "Services: Apcupsd (Status)";
+include("head.inc");
+
+function puts( $arg ) { echo "$arg\n"; }	
+
+?>
+
+<style>
+<!--
+
+input {
+   font-family: courier new, courier;
+   font-weight: normal;
+   font-size: 9pt;
+}
+
+pre {
+   border: 2px solid #435370;
+   background: #F0F0F0;
+   padding: 1em;
+   font-family: courier new, courier;
+   white-space: pre;
+   line-height: 10pt;
+   font-size: 10pt;
+}
+
+.label {
+   font-family: tahoma, verdana, arial, helvetica;
+   font-size: 11px;
+   font-weight: bold;
+}
+
+.button {
+   font-family: tahoma, verdana, arial, helvetica;
+   font-weight: bold;
+   font-size: 11px;
+}
+
+-->
+</style>
+</head>
+<body link="#0000CC" vlink="#0000CC" alink="#0000CC">
+
+	<?php include("fbegin.inc"); ?>
+	
+	<?php if($one_two): ?>
+	<p class="pgtitle"><?=$pgtitle?></font></p>
+	<?php endif; ?>
+
+
+<div id="mainlevel">
+		<table width="100%" border="0" cellpadding="0" cellspacing="0">
+			<tr><td>
+		<?php
+			$tab_array = array();
+			$tab_array[] = array(gettext("General"), false, "/pkg_edit.php?xml=apcupsd.xml&amp;id=0");
+			$tab_array[] = array(gettext("Status"), true, "/apcupsd_status.php");
+			display_top_tabs($tab_array);
+		?>
+			</td></tr>
+		</table>
+</div>
+
+<div id="mainarea" style="padding-top: 0px; padding-bottom: 0px; ">
+	<table class="tabcont" width="100%" border="0" cellspacing="0" cellpadding="6">
+		<tr><td>
+<?php
+   puts("<pre>");
+   putenv("PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin");
+   $ph = popen('apcaccess 2>&1', "r" );
+   while ($line = fgets($ph)) echo htmlspecialchars($line);
+   pclose($ph);
+   puts("</pre>");
+?>
+		</td></tr>
+	</table>
+</div>	
+<?php 
+include("fend.inc");
+?>
+</body>
+</html>