freeradius2 changes

4 files changed, 824 insertions, 106 deletions

diff --git a/config/freeradius2/freeradius.inc b/config/freeradius2/freeradius.inc
index 0cf53eb8..a3558cea 100755..100644
--- a/config/freeradius2/freeradius.inc
+++ b/config/freeradius2/freeradius.inc
@@ -46,33 +46,40 @@ function freeradius_settings_resync() {
 	global $config;
 	$conf = '';
 	
-	// Definition variables for freeradiussettings
 	$varsettings = $config['installedpackages']['freeradiussettings']['config'][0];
-	$varsettingsmaxrequesttime = $varsettings['varsettingsmaxrequesttime'];
-	$varsettingscleanupdelay = $varsettings['varsettingscleanupdelay'];
-	$varsettingsmaxrequests = $varsettings['varsettingsmaxrequests'];
-	$varsettingslogdir = $varsettings['varsettingslogdir'];
-	$varsettingsstrippednames = $varsettings['varsettingsstrippednames'];
-	$varsettingsauth = $varsettings['varsettingsauth'];
-	$varsettingsauthbadpass = $varsettings['varsettingsauthbadpass'];
-	$varsettingsauthgoodpass = $varsettings['varsettingsauthgoodpass'];
-	$varsettingshostnamelookups = $varsettings['varsettingshostnamelookups'];
-	$varsettingsallowcoredumps = $varsettings['varsettingsallowcoredumps'];
-	$varsettingsregularexpressions = $varsettings['varsettingsregularexpressions'];
-	$varsettingsextendedexpressions = $varsettings['varsettingsextendedexpressions'];
-	$varsettingsmaxattributes = $varsettings['varsettingsmaxattributes'];
-	$varsettingsrejectdelay = $varsettings['varsettingsrejectdelay'];
-	$varsettingsstartservers = $varsettings['varsettingsstartservers'];
-	$varsettingsmaxservers = $varsettings['varsettingsmaxservers'];
-	$varsettingsminspareservers = $varsettings['varsettingsminspareservers'];
-	$varsettingsmaxspareservers = $varsettings['varsettingsmaxspareservers'];
-	$varsettingsmaxqueuesize = $varsettings['varsettingsmaxqueuesize'];
-	$varsettingsmaxrequestsperserver = $varsettings['varsettingsmaxrequestsperserver'];
+	
+	// Variables: General configuration
+	$varsettingsmaxrequesttime = ($varsettings['varsettingsmaxrequesttime']?$varsettings['varsettingsmaxrequesttime']:'1024');
+	$varsettingscleanupdelay = ($varsettings['varsettingscleanupdelay']?$varsettings['varsettingscleanupdelay']:'30');
+	$varsettingsmaxrequests = ($varsettings['varsettingsmaxrequests']?$varsettings['varsettingsmaxrequests']:'5');
+	$varsettingslogdir = ($varsettings['varsettingslogdir']?$varsettings['varsettingslogdir']:'no');
+	$varsettingsstrippednames = ($varsettings['varsettingsstrippednames']?$varsettings['varsettingsstrippednames']:'no');
+	
+	// Variables: Logging options
+	$varsettingsauth = ($varsettings['varsettingsauth']?$varsettings['varsettingsauth']:'yes');
+	$varsettingsauthbadpass = ($varsettings['varsettingsauthbadpass']?$varsettings['varsettingsauthbadpass']:'yes');
+	$varsettingsauthgoodpass = ($varsettings['varsettingsauthgoodpass']?$varsettings['varsettingsauthgoodpass']:'files');
+	$varsettingshostnamelookups = ($varsettings['varsettingshostnamelookups']?$varsettings['varsettingshostnamelookups']:'no');
+	$varsettingsallowcoredumps = ($varsettings['varsettingsallowcoredumps']?$varsettings['varsettingsallowcoredumps']:'no');
+	$varsettingsregularexpressions = ($varsettings['varsettingsregularexpressions']?$varsettings['varsettingsregularexpressions']:'no');
+	$varsettingsextendedexpressions = ($varsettings['varsettingsextendedexpressions']?$varsettings['varsettingsextendedexpressions']:'no');
+	
+	// Variables: Security
+	$varsettingsmaxattributes = ($varsettings['varsettingsmaxattributes']?$varsettings['varsettingsmaxattributes']:'200');
+	$varsettingsrejectdelay = ($varsettings['varsettingsrejectdelay']?$varsettings['varsettingsrejectdelay']:'1');
+	
+	// Variables: Thread Pool
+	$varsettingsstartservers = ($varsettings['varsettingsstartservers']?$varsettings['varsettingsstartservers']:'5');
+	$varsettingsmaxservers = ($varsettings['varsettingsmaxservers']?$varsettings['varsettingsmaxservers']:'32');
+	$varsettingsminspareservers = ($varsettings['varsettingsminspareservers']?$varsettings['varsettingsminspareservers']:'3');
+	$varsettingsmaxspareservers = ($varsettings['varsettingsmaxspareservers']?$varsettings['varsettingsmaxspareservers']:'10');
+	$varsettingsmaxqueuesize = ($varsettings['varsettingsmaxqueuesize']?$varsettings['varsettingsmaxqueuesize']:'65536');
+	$varsettingsmaxrequestsperserver = ($varsettings['varsettingsmaxrequestsperserver']?$varsettings['varsettingsmaxrequestsperserver']:'0');
 	
 	// These lines are uncommented in fuction "freeradius_settings_resync" to INCLUDE / enable eap.conf
 	$sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0];
-	$varsqlconfenable = $sqlconf['varsqlconfenable'];
-	$varsqlconfenablecounter = $sqlconf['varsqlconfenablecounter'];
+	$varsqlconfenable = ($sqlconf['varsqlconfenable']?$sqlconf['varsqlconfenable']:'#\$INCLUDE sql.conf');
+	$varsqlconfenablecounter = ($sqlconf['varsqlconfenablecounter']?$sqlconf['varsqlconfenablecounter']:'#\$INCLUDE sql/mysql/counter.conf');
 	
 	
 
@@ -114,28 +121,60 @@ regular_expressions = $varsettingsregularexpressions
 extended_expressions = $varsettingsextendedexpressions
 
 EOD;
-
+// This activates virtual-server coa.
+// A better way would be if this link would only be created if there is an interface type "coa"
+// and if deleted the link will be deleted, too
+exec("ln -s /usr/local/etc/raddb/sites-available/coa /usr/local/etc/raddb/sites-enabled/");
 $arrinterfaces = $config['installedpackages']['freeradiusinterfaces']['config'];
-	if (is_array($arrinterfaces)) {
+	if (is_array($arrinterfaces)  && !empty($arrinterfaces)) {
 		foreach ($arrinterfaces as $item) {
 			$varinterfaceip = $item['varinterfaceip'];
 			$varinterfaceport = $item['varinterfaceport'];
 			$varinterfacetype = $item['varinterfacetype'];
 			$varinterfaceipversion = $item['varinterfaceipversion'];
-			$conf .= <<<EOD
 
+			// Begin "if" for interface-type = detail
+			if ($item['varinterfacetype'] == 'detail') {
+			$conf .= <<<EOD
 listen {
 		type = $varinterfacetype
 		$varinterfaceipversion = $varinterfaceip
 		port = $varinterfaceport
-		### the following two lines are only neccessary for interface type detail
-		filename = ${radacctdir}/detail
+		filename = \${radacctdir}/detail-%Y%m%d:%H
 		load_factor = 10
 }
 
 EOD;
+			}	// End "if" for interface-type = detail
+
+			// Begin "if" for interface-type = coa
+			if ($item['varinterfacetype'] == 'coa') {
+			$conf .= <<<EOD
+listen {
+		type = $varinterfacetype
+		$varinterfaceipversion = $varinterfaceip
+		port = $varinterfaceport
+		server = coa
+}
+
+EOD;
+			}	// End "if" for interface-type = detail
+
+			// Begin "if" for interface-type = auth, acct, proxy, status
+			if (($item['varinterfacetype'] == 'auth') || ($item['varinterfacetype'] == 'acct') || ($item['varinterfacetype'] == 'proxy') || ($item['varinterfacetype'] == 'status')) {
+			$conf .= <<<EOD
+listen {
+		type = $varinterfacetype
+		$varinterfaceipversion = $varinterfaceip
+		port = $varinterfaceport
+}
+
+EOD;
+			}	// End "if" for interface-type = auth, acct, proxy, status
 		}	// end foreach
-	}		// end if
+	}	// end if array
+
+
 $conf .= <<<EOD
 
 log {
@@ -154,7 +193,7 @@ checkrad = \${sbindir}/checkrad
 security {
 	max_attributes = $varsettingsmaxattributes
 	reject_delay = $varsettingsrejectdelay
-	status_server = no  		### Needs additional config in raddb/sites-available/status
+	status_server = yes
 }
 
 ### disbale proxy module. In most environments we do not need to proxy requests to another RADIUS PROXY server
@@ -218,6 +257,9 @@ global $config;
 
 $conf = '';
 $users = $config['installedpackages']['freeradius']['config'];
+
+$usersoutput = $config['installedpackages']['freeradius']['config'][0]['usersoutput']=base64_encode(file_get_contents('/usr/local/etc/raddb/users'));
+
 if (is_array($users)) {
 foreach ($users as $user) {
 $username = $user['username'];
@@ -353,32 +395,32 @@ function freeradius_eapconf_resync() {
 	$eapconf = $config['installedpackages']['freeradiuseapconf']['config'][0];
 	
 	// Variables: EAP
-	$vareapconfdefaulteaptype = $eapconf['vareapconfdefaulteaptype'];
-	$vareapconftimerexpire = $eapconf['vareapconftimerexpire'];
-	$vareapconfignoreunknowneaptypes = $eapconf['vareapconfignoreunknowneaptypes'];
-	$vareapconfciscoaccountingusernamebug = $eapconf['vareapconfciscoaccountingusernamebug'];
-	$vareapconfmaxsessions = $eapconf['vareapconfmaxsessions'];
+	$vareapconfdefaulteaptype = ($eapconf['vareapconfdefaulteaptype']?$eapconf['vareapconfdefaulteaptype']:'md5');
+	$vareapconftimerexpire = ($eapconf['vareapconftimerexpire']?$eapconf['vareapconftimerexpire']:'60');
+	$vareapconfignoreunknowneaptypes = ($eapconf['vareapconfignoreunknowneaptypes']?$eapconf['vareapconfignoreunknowneaptypes']:'no');
+	$vareapconfciscoaccountingusernamebug = ($eapconf['vareapconfciscoaccountingusernamebug']?$eapconf['vareapconfciscoaccountingusernamebug']:'no');
+	$vareapconfmaxsessions = ($eapconf['vareapconfmaxsessions']?$eapconf['vareapconfmaxsessions']:'4096');
 	
 	// Variables: EAP-TLS and EAP-TLS with OCSP support
-	$vareapconfprivatekeypassword = $eapconf['vareapconfprivatekeypassword'];
-	$vareapconfprivatekeyfile = $eapconf['vareapconfprivatekeyfile'];
-	$vareapconfcertificatefile = $eapconf['vareapconfcertificatefile'];
-	$vareapconfcafile = $eapconf['vareapconfcafile'];
-	$vareapconfdhfile = $eapconf['vareapconfdhfile'];
-	$vareapconfrandomfile = $eapconf['vareapconfrandomfile'];
-	$vareapconfocspenable = $eapconf['vareapconfocspenable'];
-	$vareapconfocspoverridecerturl = $eapconf['vareapconfocspoverridecerturl'];
-	$vareapconfocspurl = $eapconf['vareapconfocspurl'];
+	$vareapconfprivatekeypassword = ($eapconf['vareapconfprivatekeypassword']?$eapconf['vareapconfprivatekeypassword']:'whatever');
+	$vareapconfprivatekeyfile = ($eapconf['vareapconfprivatekeyfile']?$eapconf['vareapconfprivatekeyfile']:'server.pem');
+	$vareapconfcertificatefile = ($eapconf['vareapconfcertificatefile']?$eapconf['vareapconfcertificatefile']:'server.pem');
+	$vareapconfcafile = ($eapconf['vareapconfcafile']?$eapconf['vareapconfcafile']:'ca.pem');
+	$vareapconfdhfile = ($eapconf['vareapconfdhfile']?$eapconf['vareapconfdhfile']:'dh');
+	$vareapconfrandomfile = ($eapconf['vareapconfrandomfile']?$eapconf['vareapconfrandomfile']:'random');
+	$vareapconfocspenable = ($eapconf['vareapconfocspenable']?$eapconf['vareapconfocspenable']:'no');
+	$vareapconfocspoverridecerturl = ($eapconf['vareapconfocspoverridecerturl']?$eapconf['vareapconfocspoverridecerturl']:'no');
+	$vareapconfocspurl = ($eapconf['vareapconfocspurl']?$eapconf['vareapconfocspurl']:'http://127.0.0.1/ocsp/');
 	
 	// Variables: EAP-TTLS
-	$vareapconfttlsdefaulteaptype = $eapconf['vareapconfttlsdefaulteaptype'];
-	$vareapconfttlscopyrequesttotunnel = $eapconf['vareapconfttlscopyrequesttotunnel'];
-	$vareapconfttlsusetunneledreply = $eapconf['vareapconfttlsusetunneledreply'];
+	$vareapconfttlsdefaulteaptype = ($eapconf['vareapconfttlsdefaulteaptype']?$eapconf['vareapconfttlsdefaulteaptype']:'md5');
+	$vareapconfttlscopyrequesttotunnel = ($eapconf['vareapconfttlscopyrequesttotunnel']?$eapconf['vareapconfttlscopyrequesttotunnel']:'no');
+	$vareapconfttlsusetunneledreply = ($eapconf['vareapconfttlsusetunneledreply']?$eapconf['vareapconfttlsusetunneledreply']:'no');
 	
 	// Variables: EAP-PEAP with MSCHAPv2
-	$vareapconfpeapdefaulteaptype = $eapconf['vareapconfpeapdefaulteaptype'];
-	$vareapconfpeapcopyrequesttotunnel = $eapconf['vareapconfpeapcopyrequesttotunnel'];
-	$vareapconfpeapusetunneledreply = $eapconf['vareapconfpeapusetunneledreply'];
+	$vareapconfpeapdefaulteaptype = ($eapconf['vareapconfpeapdefaulteaptype']?$eapconf['vareapconfpeapdefaulteaptype']:'mschapv2');
+	$vareapconfpeapcopyrequesttotunnel = ($eapconf['vareapconfpeapcopyrequesttotunnel']?$eapconf['vareapconfpeapcopyrequesttotunnel']:'no');
+	$vareapconfpeapusetunneledreply = ($eapconf['vareapconfpeapusetunneledreply']?$eapconf['vareapconfpeapusetunneledreply']:'no');
 	
 	
 	$conf .= <<<EOD
@@ -481,34 +523,34 @@ function freeradius_sqlconf_resync() {
 	$sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0];
 	
 	// Variables: SQL
-	$varsqlconfdatabase = $sqlconf['varsqlconfdatabase'];
-	$varsqlconfserver = $sqlconf['varsqlconfserver'];
-	$varsqlconfport = $sqlconf['varsqlconfport'];
-	$varsqlconflogin = $sqlconf['varsqlconflogin'];
-	$varsqlconfpassword = $sqlconf['varsqlconfpassword'];
-	$varsqlconfradiusdb = $sqlconf['varsqlconfradiusdb'];
-	$varsqlconfaccttable1 = $sqlconf['varsqlconfaccttable1'];
-	$varsqlconfaccttable2 = $sqlconf['varsqlconfaccttable2'];
-	$varsqlconfpostauthtable = $sqlconf['varsqlconfpostauthtable'];
-	$varsqlconfauthchecktable = $sqlconf['varsqlconfauthchecktable'];
-	$varsqlconfauthreplytable = $sqlconf['varsqlconfauthreplytable'];
-	$varsqlconfgroupchecktable = $sqlconf['varsqlconfgroupchecktable'];
-	$varsqlconfgroupreplytable = $sqlconf['varsqlconfgroupreplytable'];
-	$varsqlconfusergrouptable = $sqlconf['varsqlconfusergrouptable'];
-	$varsqlconfreadgroups = $sqlconf['varsqlconfreadgroups'];
-	$varsqlconfdeletestalesessions = $sqlconf['varsqlconfdeletestalesessions'];
-	$varsqlconfsqltrace = $sqlconf['varsqlconfsqltrace'];
-	$varsqlconfnumsqlsocks = $sqlconf['varsqlconfnumsqlsocks'];
-	$varsqlconfconnectfailureretrydelay = $sqlconf['varsqlconfconnectfailureretrydelay'];
-	$varsqlconflifetime = $sqlconf['varsqlconflifetime'];
-	$varsqlconfmaxqueries = $sqlconf['varsqlconfmaxqueries'];
-	$varsqlconfreadclients = $sqlconf['varsqlconfreadclients'];
-	$varsqlconfnastable = $sqlconf['varsqlconfnastable'];
+	$varsqlconfdatabase = ($sqlconf['varsqlconfdatabase']?$sqlconf['varsqlconfdatabase']:'mysql');
+	$varsqlconfserver = ($sqlconf['varsqlconfserver']?$sqlconf['varsqlconfserver']:'localhost');
+	$varsqlconfport = ($sqlconf['varsqlconfport']?$sqlconf['varsqlconfport']:'3306');
+	$varsqlconflogin = ($sqlconf['varsqlconflogin']?$sqlconf['varsqlconflogin']:'radius');
+	$varsqlconfpassword = ($sqlconf['varsqlconfpassword']?$sqlconf['varsqlconfpassword']:'radpass');
+	$varsqlconfradiusdb = ($sqlconf['varsqlconfradiusdb']?$sqlconf['varsqlconfradiusdb']:'radius');
+	$varsqlconfaccttable1 = ($sqlconf['varsqlconfaccttable1']?$sqlconf['varsqlconfaccttable1']:'radacct');
+	$varsqlconfaccttable2 = ($sqlconf['varsqlconfaccttable2']?$sqlconf['varsqlconfaccttable2']:'radacct');
+	$varsqlconfpostauthtable = ($sqlconf['varsqlconfpostauthtable']?$sqlconf['varsqlconfpostauthtable']:'radpostauth');
+	$varsqlconfauthchecktable = ($sqlconf['varsqlconfauthchecktable']?$sqlconf['varsqlconfauthchecktable']:'radcheck');
+	$varsqlconfauthreplytable = ($sqlconf['varsqlconfauthreplytable']?$sqlconf['varsqlconfauthreplytable']:'radreply');
+	$varsqlconfgroupchecktable = ($sqlconf['varsqlconfgroupchecktable']?$sqlconf['varsqlconfgroupchecktable']:'radgroupcheck');
+	$varsqlconfgroupreplytable = ($sqlconf['varsqlconfgroupreplytable']?$sqlconf['varsqlconfgroupreplytable']:'radgroupreply');
+	$varsqlconfusergrouptable = ($sqlconf['varsqlconfusergrouptable']?$sqlconf['varsqlconfusergrouptable']:'radusergroup');
+	$varsqlconfreadgroups = ($sqlconf['varsqlconfreadgroups']?$sqlconf['varsqlconfreadgroups']:'yes');
+	$varsqlconfdeletestalesessions = ($sqlconf['varsqlconfdeletestalesessions']?$sqlconf['varsqlconfdeletestalesessions']:'yes');
+	$varsqlconfsqltrace = ($sqlconf['varsqlconfsqltrace']?$sqlconf['varsqlconfsqltrace']:'no');
+	$varsqlconfnumsqlsocks = ($sqlconf['varsqlconfnumsqlsocks']?$sqlconf['varsqlconfnumsqlsocks']:'5');
+	$varsqlconfconnectfailureretrydelay = ($sqlconf['varsqlconfconnectfailureretrydelay']?$sqlconf['varsqlconfconnectfailureretrydelay']:'60');
+	$varsqlconflifetime = ($sqlconf['varsqlconflifetime']?$sqlconf['varsqlconflifetime']:'0');
+	$varsqlconfmaxqueries = ($sqlconf['varsqlconfmaxqueries']?$sqlconf['varsqlconfmaxqueries']:'0');
+	$varsqlconfreadclients = ($sqlconf['varsqlconfreadclients']?$sqlconf['varsqlconfreadclients']:'yes');
+	$varsqlconfnastable = ($sqlconf['varsqlconfnastable']?$sqlconf['varsqlconfnastable']:'nas');
 	
 	// These lines are uncommented in fuction "freeradius_settings_resync" to INCLUDE / enable eap.conf
 	// $sqlconf = $config['installedpackages']['freeradiussqlconf']['config'][0];
-	// $varsqlconfenable = $sqlconf['varsqlconfenable'];
-	// $varsqlconfenablecounter = $sqlconf['varsqlconfenablecounter'];
+	// $varsqlconfenable = ($sqlconf['varsqlconfenable']?$sqlconf['varsqlconfenable']:'#\$INCLUDE sql.conf');
+	// $varsqlconfenablecounter = ($sqlconf['varsqlconfenablecounter']?$sqlconf['varsqlconfenablecounter']:'#\$INCLUDE sql/mysql/counter.conf');
 	
 
 	$conf .= <<<EOD
@@ -552,4 +594,667 @@ EOD;
 
 	restart_service('freeradius');
 }
+
+function freeradius_serverdefault_resync() {
+	global $config;
+	$conf = '';
+	
+	$conf .= <<<EOD
+
+######################################################################
+#
+#	As of 2.0.0, FreeRADIUS supports virtual hosts using the
+#	"server" section, and configuration directives.
+#
+#	Virtual hosts should be put into the "sites-available"
+#	directory.  Soft links should be created in the "sites-enabled"
+#	directory to these files.  This is done in a normal installation.
+#
+#	If you are using 802.1X (EAP) authentication, please see also
+#	the "inner-tunnel" virtual server.  You wll likely have to edit
+#	that, too, for authentication to work.
+#
+#	$Id$
+#
+######################################################################
+#
+#	Read "man radiusd" before editing this file.  See the section
+#	titled DEBUGGING.  It outlines a method where you can quickly
+#	obtain the configuration you want, without running into
+#	trouble.  See also "man unlang", which documents the format
+#	of this file.
+#
+#	This configuration is designed to work in the widest possible
+#	set of circumstances, with the widest possible number of
+#	authentication methods.  This means that in general, you should
+#	need to make very few changes to this file.
+#
+#	The best way to configure the server for your local system
+#	is to CAREFULLY edit this file.  Most attempts to make large
+#	edits to this file will BREAK THE SERVER.  Any edits should
+#	be small, and tested by running the server with "radiusd -X".
+#	Once the edits have been verified to work, save a copy of these
+#	configuration files somewhere.  (e.g. as a "tar" file).  Then,
+#	make more edits, and test, as above.
+#
+#	There are many "commented out" references to modules such
+#	as ldap, sql, etc.  These references serve as place-holders.
+#	If you need the functionality of that module, then configure
+#	it in radiusd.conf, and un-comment the references to it in
+#	this file.  In most cases, those small changes will result
+#	in the server being able to connect to the DB, and to
+#	authenticate users.
+#
+######################################################################
+
+#
+#	In 1.x, the "authorize", etc. sections were global in
+#	radiusd.conf.  As of 2.0, they SHOULD be in a server section.
+#
+#	The server section with no virtual server name is the "default"
+#	section.  It is used when no server name is specified.
+#
+#	We don't indent the rest of this file, because doing so
+#	would make it harder to read.
+#
+
+#  Authorization. First preprocess (hints and huntgroups files),
+#  then realms, and finally look in the "users" file.
+#
+#  Any changes made here should also be made to the "inner-tunnel"
+#  virtual server.
+#
+#  The order of the realm modules will determine the order that
+#  we try to find a matching realm.
+#
+#  Make *sure* that 'preprocess' comes before any realm if you 
+#  need to setup hints for the remote radius server
+authorize {
+	#
+	#  Security settings.  Take a User-Name, and do some simple
+	#  checks on it, for spaces and other invalid characters.  If
+	#  it looks like the user is trying to play games, reject it.
+	#
+	#  This should probably be enabled by default.
+	#
+	#  See policy.conf for the definition of the filter_username policy.
+	#
+#	filter_username
+
+	#
+	#  The preprocess module takes care of sanitizing some bizarre
+	#  attributes in the request, and turning them into attributes
+	#  which are more standard.
+	#
+	#  It takes care of processing the 'raddb/hints' and the
+	#  'raddb/huntgroups' files.
+	preprocess
+
+	#
+	#  If you want to have a log of authentication requests,
+	#  un-comment the following line, and the 'detail auth_log'
+	#  section, above.
+#	auth_log
+
+	#
+	#  The chap module will set 'Auth-Type := CHAP' if we are
+	#  handling a CHAP request and Auth-Type has not already been set
+	chap
+
+	#
+	#  If the users are logging in with an MS-CHAP-Challenge
+	#  attribute for authentication, the mschap module will find
+	#  the MS-CHAP-Challenge attribute, and add 'Auth-Type := MS-CHAP'
+	#  to the request, which will cause the server to then use
+	#  the mschap module for authentication.
+	mschap
+
+	#
+	#  If you have a Cisco SIP server authenticating against
+	#  FreeRADIUS, uncomment the following line, and the 'digest'
+	#  line in the 'authenticate' section.
+	digest
+
+	#
+	#  The WiMAX specification says that the Calling-Station-Id
+	#  is 6 octets of the MAC.  This definition conflicts with
+	#  RFC 3580, and all common RADIUS practices.  Un-commenting
+	#  the "wimax" module here means that it will fix the
+	#  Calling-Station-Id attribute to the normal format as
+	#  specified in RFC 3580 Section 3.21
+#	wimax
+
+	#
+	#  Look for IPASS style 'realm/', and if not found, look for
+	#  '@realm', and decide whether or not to proxy, based on
+	#  that.
+#	IPASS
+
+	#
+	#  If you are using multiple kinds of realms, you probably
+	#  want to set "ignore_null = yes" for all of them.
+	#  Otherwise, when the first style of realm doesn't match,
+	#  the other styles won't be checked.
+	#
+	suffix
+#	ntdomain
+
+	#
+	#  This module takes care of EAP-MD5, EAP-TLS, and EAP-LEAP
+	#  authentication.
+	#
+	#  It also sets the EAP-Type attribute in the request
+	#  attribute list to the EAP type from the packet.
+	#
+	#  As of 2.0, the EAP module returns "ok" in the authorize stage
+	#  for TTLS and PEAP.  In 1.x, it never returned "ok" here, so
+	#  this change is compatible with older configurations.
+	#
+	#  The example below uses module failover to avoid querying all
+	#  of the following modules if the EAP module returns "ok".
+	#  Therefore, your LDAP and/or SQL servers will not be queried
+	#  for the many packets that go back and forth to set up TTLS
+	#  or PEAP.  The load on those servers will therefore be reduced.
+	#
+	eap {
+		ok = return
+	}
+
+	#
+	#  Pull crypt'd passwords from /etc/passwd or /etc/shadow,
+	#  using the system API's to get the password.  If you want
+	#  to read /etc/passwd or /etc/shadow directly, see the
+	#  passwd module in radiusd.conf.
+	#
+#	unix
+
+	#
+	#  Read the 'users' file
+	files
+
+	#
+	#  Look in an SQL database.  The schema of the database
+	#  is meant to mirror the "users" file.
+	#
+	#  See "Authorization Queries" in sql.conf
+#	sql
+
+	#
+	#  If you are using /etc/smbpasswd, and are also doing
+	#  mschap authentication, the un-comment this line, and
+	#  configure the 'etc_smbpasswd' module, above.
+#	etc_smbpasswd
+
+	#
+	#  The ldap module will set Auth-Type to LDAP if it has not
+	#  already been set
+#	ldap
+
+	#
+	#  Enforce daily limits on time spent logged in.
+#	daily
+
+	#
+	# Use the checkval module
+#	checkval
+
+	expiration
+	logintime
+
+	#
+	#  If no other module has claimed responsibility for
+	#  authentication, then try to use PAP.  This allows the
+	#  other modules listed above to add a "known good" password
+	#  to the request, and to do nothing else.  The PAP module
+	#  will then see that password, and use it to do PAP
+	#  authentication.
+	#
+	#  This module should be listed last, so that the other modules
+	#  get a chance to set Auth-Type for themselves.
+	#
+	pap
+
+	#
+	#  If "status_server = yes", then Status-Server messages are passed
+	#  through the following section, and ONLY the following section.
+	#  This permits you to do DB queries, for example.  If the modules
+	#  listed here return "fail", then NO response is sent.
+	#
+	Autz-Type Status-Server {
+
+	}
+}
+
+
+#  Authentication.
+#
+#
+#  This section lists which modules are available for authentication.
+#  Note that it does NOT mean 'try each module in order'.  It means
+#  that a module from the 'authorize' section adds a configuration
+#  attribute 'Auth-Type := FOO'.  That authentication type is then
+#  used to pick the apropriate module from the list below.
+#
+
+#  In general, you SHOULD NOT set the Auth-Type attribute.  The server
+#  will figure it out on its own, and will do the right thing.  The
+#  most common side effect of erroneously setting the Auth-Type
+#  attribute is that one authentication method will work, but the
+#  others will not.
+#
+#  The common reasons to set the Auth-Type attribute by hand
+#  is to either forcibly reject the user (Auth-Type := Reject),
+#  or to or forcibly accept the user (Auth-Type := Accept).
+#
+#  Note that Auth-Type := Accept will NOT work with EAP.
+#
+#  Please do not put "unlang" configurations into the "authenticate"
+#  section.  Put them in the "post-auth" section instead.  That's what
+#  the post-auth section is for.
+#
+authenticate {
+	#
+	#  PAP authentication, when a back-end database listed
+	#  in the 'authorize' section supplies a password.  The
+	#  password can be clear-text, or encrypted.
+	Auth-Type PAP {
+		pap
+	}
+
+	#
+	#  Most people want CHAP authentication
+	#  A back-end database listed in the 'authorize' section
+	#  MUST supply a CLEAR TEXT password.  Encrypted passwords
+	#  won't work.
+	Auth-Type CHAP {
+		chap
+	}
+
+	#
+	#  MSCHAP authentication.
+	Auth-Type MS-CHAP {
+		mschap
+	}
+
+	#
+	#  If you have a Cisco SIP server authenticating against
+	#  FreeRADIUS, uncomment the following line, and the 'digest'
+	#  line in the 'authorize' section.
+	digest
+
+	#
+	#  Pluggable Authentication Modules.
+#	pam
+
+	#
+	#  See 'man getpwent' for information on how the 'unix'
+	#  module checks the users password.  Note that packets
+	#  containing CHAP-Password attributes CANNOT be authenticated
+	#  against /etc/passwd!  See the FAQ for details.
+	#
+	#  For normal "crypt" authentication, the "pap" module should
+	#  be used instead of the "unix" module.  The "unix" module should
+	#  be used for authentication ONLY for compatibility with legacy
+	#  FreeRADIUS configurations.
+	#
+	unix
+
+	# Uncomment it if you want to use ldap for authentication
+	#
+	# Note that this means "check plain-text password against
+	# the ldap database", which means that EAP won't work,
+	# as it does not supply a plain-text password.
+#	Auth-Type LDAP {
+#		ldap
+#	}
+
+	#
+	#  Allow EAP authentication.
+	eap
+
+	#
+	#  The older configurations sent a number of attributes in
+	#  Access-Challenge packets, which wasn't strictly correct.
+	#  If you want to filter out these attributes, uncomment
+	#  the following lines.
+	#
+#	Auth-Type eap {
+#		eap {
+#			handled = 1  
+#		}
+#		if (handled && (Response-Packet-Type == Access-Challenge)) {
+#			attr_filter.access_challenge.post-auth
+#			handled  # override the "updated" code from attr_filter
+#		}
+#	}
+}
+
+
+#
+#  Pre-accounting.  Decide which accounting type to use.
+#
+preacct {
+	preprocess
+
+	#
+	#  Session start times are *implied* in RADIUS.
+	#  The NAS never sends a "start time".  Instead, it sends
+	#  a start packet, *possibly* with an Acct-Delay-Time.
+	#  The server is supposed to conclude that the start time
+	#  was "Acct-Delay-Time" seconds in the past.
+	#
+	#  The code below creates an explicit start time, which can
+	#  then be used in other modules.
+	#
+	#  The start time is: NOW - delay - session_length
+	#
+
+#	  update request {
+#	  	FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l - %{%{Acct-Session-Time}:-0} - %{%{Acct-Delay-Time}:-0}}"
+#	}
+
+
+	#
+	#  Ensure that we have a semi-unique identifier for every
+	#  request, and many NAS boxes are broken.
+	acct_unique
+
+	#
+	#  Look for IPASS-style 'realm/', and if not found, look for
+	#  '@realm', and decide whether or not to proxy, based on
+	#  that.
+	#
+	#  Accounting requests are generally proxied to the same
+	#  home server as authentication requests.
+#	IPASS
+	suffix
+#	ntdomain
+
+	#
+	#  Read the 'acct_users' file
+	files
+}
+
+#
+#  Accounting.  Log the accounting data.
+#
+accounting {
+	#
+	#  Create a 'detail'ed log of the packets.
+	#  Note that accounting requests which are proxied
+	#  are also logged in the detail file.
+	detail
+#	daily
+
+	#  Update the wtmp file
+	#
+	#  If you don't use "radlast", you can delete this line.
+	unix
+
+	#
+	#  For Simultaneous-Use tracking.
+	#
+	#  Due to packet losses in the network, the data here
+	#  may be incorrect.  There is little we can do about it.
+	radutmp
+#	sradutmp
+
+	#  Return an address to the IP Pool when we see a stop record.
+#	main_pool
+
+	#
+	#  Log traffic to an SQL database.
+	#
+	#  See "Accounting queries" in sql.conf
+#	sql
+
+	#
+	#  If you receive stop packets with zero session length,
+	#  they will NOT be logged in the database.  The SQL module
+	#  will print a message (only in debugging mode), and will
+	#  return "noop".
+	#
+	#  You can ignore these packets by uncommenting the following
+	#  three lines.  Otherwise, the server will not respond to the
+	#  accounting request, and the NAS will retransmit.
+	#
+#	if (noop) {
+#		ok
+#	}
+
+	#
+	#  Instead of sending the query to the SQL server,
+	#  write it into a log file.
+	#
+#	sql_log
+
+	#  Cisco VoIP specific bulk accounting
+#	pgsql-voip
+
+	# For Exec-Program and Exec-Program-Wait
+	exec
+
+	#  Filter attributes from the accounting response.
+	attr_filter.accounting_response
+
+	#
+	#  See "Autz-Type Status-Server" for how this works.
+	#
+	Acct-Type Status-Server {
+
+	}
+}
+
+
+#  Session database, used for checking Simultaneous-Use. Either the radutmp 
+#  or rlm_sql module can handle this.
+#  The rlm_sql module is *much* faster
+session {
+	radutmp
+
+	#
+	#  See "Simultaneous Use Checking Queries" in sql.conf
+#	sql
+}
+
+
+#  Post-Authentication
+#  Once we KNOW that the user has been authenticated, there are
+#  additional steps we can take.
+post-auth {
+	#  Get an address from the IP Pool.
+#	main_pool
+
+	#
+	#  If you want to have a log of authentication replies,
+	#  un-comment the following line, and the 'detail reply_log'
+	#  section, above.
+#	reply_log
+
+	#
+	#  After authenticating the user, do another SQL query.
+	#
+	#  See "Authentication Logging Queries" in sql.conf
+#	sql
+
+	#
+	#  Instead of sending the query to the SQL server,
+	#  write it into a log file.
+	#
+#	sql_log
+
+	#
+	#  Un-comment the following if you have set
+	#  'edir_account_policy_check = yes' in the ldap module sub-section of
+	#  the 'modules' section.
+	#
+#	ldap
+
+	# For Exec-Program and Exec-Program-Wait
+	exec
+
+	#
+	#  Calculate the various WiMAX keys.  In order for this to work,
+	#  you will need to define the WiMAX NAI, usually via
+	#
+	#	update request {
+	#	       WiMAX-MN-NAI = "%{User-Name}"
+	#	}
+	#
+	#  If you want various keys to be calculated, you will need to
+	#  update the reply with "template" values.  The module will see
+	#  this, and replace the template values with the correct ones
+	#  taken from the cryptographic calculations.  e.g.
+	#
+	# 	update reply {
+	#		WiMAX-FA-RK-Key = 0x00
+	#		WiMAX-MSK = "%{EAP-MSK}"
+	#	}
+	#
+	#  You may want to delete the MS-MPPE-*-Keys from the reply,
+	#  as some WiMAX clients behave badly when those attributes
+	#  are included.  See "raddb/modules/wimax", configuration
+	#  entry "delete_mppe_keys" for more information.
+	#
+#	wimax
+
+	#  If there is a client certificate (EAP-TLS, sometimes PEAP
+	#  and TTLS), then some attributes are filled out after the
+	#  certificate verification has been performed.  These fields
+	#  MAY be available during the authentication, or they may be
+	#  available only in the "post-auth" section.
+	#
+	#  The first set of attributes contains information about the
+	#  issuing certificate which is being used.  The second
+	#  contains information about the client certificate (if
+	#  available).
+#
+#	update reply {
+#	       Reply-Message += "%{TLS-Cert-Serial}"
+#	       Reply-Message += "%{TLS-Cert-Expiration}"
+#	       Reply-Message += "%{TLS-Cert-Subject}"
+#	       Reply-Message += "%{TLS-Cert-Issuer}"
+#	       Reply-Message += "%{TLS-Cert-Common-Name}"
+#
+#	       Reply-Message += "%{TLS-Client-Cert-Serial}"
+#	       Reply-Message += "%{TLS-Client-Cert-Expiration}"
+#	       Reply-Message += "%{TLS-Client-Cert-Subject}"
+#	       Reply-Message += "%{TLS-Client-Cert-Issuer}"
+#	       Reply-Message += "%{TLS-Client-Cert-Common-Name}"
+#	}
+
+
+	#  If the WiMAX module did it's work, you may want to do more
+	#  things here, like delete the MS-MPPE-*-Key attributes.
+	#
+	#	if (updated) {
+	#		update reply {
+	#			MS-MPPE-Recv-Key !* 0x00
+	#			MS-MPPE-Send-Key !* 0x00
+	#		}
+	#	}
+
+	#
+	#  Access-Reject packets are sent through the REJECT sub-section of the
+	#  post-auth section.
+	#
+	#  Add the ldap module name (or instance) if you have set 
+	#  'edir_account_policy_check = yes' in the ldap module configuration
+	#
+	Post-Auth-Type REJECT {
+		# log failed authentications in SQL, too.
+#		sql
+		attr_filter.access_reject
+	}
+}
+
+#
+#  When the server decides to proxy a request to a home server,
+#  the proxied request is first passed through the pre-proxy
+#  stage.  This stage can re-write the request, or decide to
+#  cancel the proxy.
+#
+#  Only a few modules currently have this method.
+#
+pre-proxy {
+#	attr_rewrite
+
+	#  Uncomment the following line if you want to change attributes
+	#  as defined in the preproxy_users file.
+#	files
+
+	#  Uncomment the following line if you want to filter requests
+	#  sent to remote servers based on the rules defined in the
+	#  'attrs.pre-proxy' file.
+#	attr_filter.pre-proxy
+
+	#  If you want to have a log of packets proxied to a home
+	#  server, un-comment the following line, and the
+	#  'detail pre_proxy_log' section, above.
+#	pre_proxy_log
+}
+
+#
+#  When the server receives a reply to a request it proxied
+#  to a home server, the request may be massaged here, in the
+#  post-proxy stage.
+#
+post-proxy {
+
+	#  If you want to have a log of replies from a home server,
+	#  un-comment the following line, and the 'detail post_proxy_log'
+	#  section, above.
+#	post_proxy_log
+
+#	attr_rewrite
+
+	#  Uncomment the following line if you want to filter replies from
+	#  remote proxies based on the rules defined in the 'attrs' file.
+#	attr_filter.post-proxy
+
+	#
+	#  If you are proxying LEAP, you MUST configure the EAP
+	#  module, and you MUST list it here, in the post-proxy
+	#  stage.
+	#
+	#  You MUST also use the 'nostrip' option in the 'realm'
+	#  configuration.  Otherwise, the User-Name attribute
+	#  in the proxied request will not match the user name
+	#  hidden inside of the EAP packet, and the end server will
+	#  reject the EAP request.
+	#
+	eap
+
+	#
+	#  If the server tries to proxy a request and fails, then the
+	#  request is processed through the modules in this section.
+	#
+	#  The main use of this section is to permit robust proxying
+	#  of accounting packets.  The server can be configured to
+	#  proxy accounting packets as part of normal processing.
+	#  Then, if the home server goes down, accounting packets can
+	#  be logged to a local "detail" file, for processing with
+	#  radrelay.  When the home server comes back up, radrelay
+	#  will read the detail file, and send the packets to the
+	#  home server.
+	#
+	#  With this configuration, the server always responds to
+	#  Accounting-Requests from the NAS, but only writes
+	#  accounting packets to disk if the home server is down.
+	#
+#	Post-Proxy-Type Fail {
+#			detail
+#	}
+}
+
+EOD;
+
+	$filename = RADDB . '/sites-available/default';
+	conf_mount_rw();
+	file_put_contents($filename, $conf);
+	chmod($filename, 0600);
+	conf_mount_ro();
+
+	restart_service('freeradius');
+}
 ?>
\ No newline at end of file
diff --git a/config/freeradius2/freeradius.xml b/config/freeradius2/freeradius.xml
index 2d913f13..674a6266 100644
--- a/config/freeradius2/freeradius.xml
+++ b/config/freeradius2/freeradius.xml
@@ -90,7 +90,36 @@
 			<url>/pkg_edit.php?xml=freeradiussqlconf.xml&amp;id=0</url>
 		</tab>
 	</tabs>
-
+	<additional_files_needed>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiusclients.xml</item>
+	</additional_files_needed>
+	<additional_files_needed>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiussettings.xml</item>
+	</additional_files_needed>
+	<additional_files_needed>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiuseapconf.xml</item>
+	</additional_files_needed>
+	<additional_files_needed>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiussqlconf.xml</item>
+	</additional_files_needed>
+	<additional_files_needed>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiusinterfaces.xml</item>
+	</additional_files_needed>	
+	<additional_files_needed>
+		<prefix>/usr/local/pkg/</prefix>
+		<chmod>0755</chmod>
+		<item>http://www.pfsense.org/packages/config/freeradius2/freeradius.inc</item>
+	</additional_files_needed>
 	<adddeleteeditpagefields>
 		<columnitem>
 			<fielddescr>Username</fielddescr>
@@ -129,36 +158,6 @@
 			<fieldname>vlanid</fieldname>
 		</columnitem>
 	</adddeleteeditpagefields>
-	<additional_files_needed>
-		<prefix>/usr/local/pkg/</prefix>
-		<chmod>0755</chmod>
-		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiusclients.xml</item>
-	</additional_files_needed>
-	<additional_files_needed>
-		<prefix>/usr/local/pkg/</prefix>
-		<chmod>0755</chmod>
-		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiussettings.xml</item>
-	</additional_files_needed>
-	<additional_files_needed>
-		<prefix>/usr/local/pkg/</prefix>
-		<chmod>0755</chmod>
-		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiuseapconf.xml</item>
-	</additional_files_needed>
-	<additional_files_needed>
-		<prefix>/usr/local/pkg/</prefix>
-		<chmod>0755</chmod>
-		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiussqlconf.xml</item>
-	</additional_files_needed>
-	<additional_files_needed>
-		<prefix>/usr/local/pkg/</prefix>
-		<chmod>0755</chmod>
-		<item>http://www.pfsense.org/packages/config/freeradius2/freeradiusinterfaces.xml</item>
-	</additional_files_needed>	
-	<additional_files_needed>
-		<prefix>/usr/local/pkg/</prefix>
-		<chmod>0755</chmod>
-		<item>http://www.pfsense.org/packages/config/freeradius2/freeradius.inc</item>
-	</additional_files_needed>
 	<fields>
 		<field>
 			<name>GENERAL CONFIGURATION</name>
@@ -268,6 +267,17 @@
 			<rows>10</rows>
 			<cols>75</cols>
 		</field>
+		<field>
+			<fielddescr>Output</fielddescr>
+			<fieldname>usersoutput</fieldname>			
+			<description><![CDATA[This is for experts only and should be treat with care!<br>
+								You may append (after all options from above) custom RADIUS options to this user account (separated by commas).<br>
+								<b>IMPORTANT:</b> If you don't format this field correctly freeRADIUS will not start because of syntax errors.<br>
+								Verify your changes by checking users file (/usr/local/etc/raddb/users).]]></description>
+			<type>textarea</type>
+			<rows>10</rows>
+			<cols>75</cols>
+		</field>
 	</fields>
 	<custom_delete_php_command>
 		freeradius_users_resync();
@@ -282,6 +292,7 @@
 		freeradius_users_resync();
 		freeradius_eapconf_resync();
 		freeradius_sqlconf_resync();
+		freeradius_serverdefault_resync();
 		exec("rm -f /usr/local/etc/raddb/sites-enabled/control-socket");
 		exec("rm -f /usr/local/etc/raddb/sites-enabled/inner-tunnel");
 	</custom_php_install_command>
diff --git a/config/freeradius2/freeradiussettings.xml b/config/freeradius2/freeradiussettings.xml
index 2f4189fd..2f4189fd 100644..100755
--- a/config/freeradius2/freeradiussettings.xml
+++ b/config/freeradius2/freeradiussettings.xml
diff --git a/config/freeradius2/freeradiussqlconf.xml b/config/freeradius2/freeradiussqlconf.xml
index 8a53b923..c8af86d6 100644
--- a/config/freeradius2/freeradiussqlconf.xml
+++ b/config/freeradius2/freeradiussqlconf.xml
@@ -300,10 +300,12 @@
 	</fields>
 	<custom_delete_php_command>
 		freeradius_sqlconf_resync();
+		freeradius_serverdefault_resync();
 		freeradius_settings_resync();
 	</custom_delete_php_command>
 	<custom_php_resync_config_command>
 		freeradius_sqlconf_resync();
+		freeradius_serverdefault_resync();
 		freeradius_settings_resync();
 	</custom_php_resync_config_command>
 </packagegui>
\ No newline at end of file