Merge pull request #145 from Nachtfalkeaw/master

adding .xml to configure freeradius sql.conf from GUI

1 files changed, 309 insertions, 0 deletions

diff --git a/config/freeradius2/freeradiussqlconf.xml b/config/freeradius2/freeradiussqlconf.xml
new file mode 100644
index 00000000..8a53b923
--- /dev/null
+++ b/config/freeradius2/freeradiussqlconf.xml
@@ -0,0 +1,309 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<!DOCTYPE packagegui SYSTEM "./schema/packages.dtd">
+<?xml-stylesheet type="text/xsl" href="./xsl/package.xsl"?>
+<packagegui>
+		<copyright>
+		<![CDATA[
+/* $Id$ */
+/* ========================================================================== */
+/*
+    authng.xml
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2007 to whom it may belong
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+		]]>
+	</copyright>
+	<description><![CDATA[Describe your package here]]></description>
+	<requirements>Describe your package requirements here</requirements>
+	<faq>Currently there are no FAQ items provided.</faq>
+	<name>freeradiussqlconf</name>
+	<version>none</version>
+	<title>FreeRADIUS: SQL</title>
+	<aftersaveredirect>pkg_edit.php?xml=freeradiussqlconf.xml&amp;id=0</aftersaveredirect>
+	<include_file>/usr/local/pkg/freeradius.inc</include_file>
+	<tabs>
+		<tab>
+			<text>Users</text>
+			<url>/pkg.php?xml=freeradius.xml</url>
+		</tab>
+		<tab>
+			<text>NAS / Clients</text>
+			<url>/pkg.php?xml=freeradiusclients.xml</url>
+		</tab>
+		<tab>
+			<text>Interfaces</text>
+			<url>/pkg.php?xml=freeradiusinterfaces.xml</url>
+		</tab>
+		<tab>
+			<text>Settings</text>
+			<url>/pkg_edit.php?xml=freeradiussettings.xml&amp;id=0</url>
+		</tab>
+		<tab>
+			<text>EAP</text>
+			<url>/pkg_edit.php?xml=freeradiuseapconf.xml&amp;id=0</url>
+		</tab>
+		<tab>
+			<text>SQL</text>
+			<url>/pkg_edit.php?xml=freeradiussqlconf.xml&amp;id=0</url>
+			<active/>
+		</tab>
+	</tabs>
+	<fields>
+		<field>
+			<name>Enable SQL Database</name>
+			<type>listtopic</type>
+		</field>
+		<field>
+			<fielddescr>Enable SQL Configuration</fielddescr>
+			<fieldname>varsqlconfenable</fieldname>
+			<description><![CDATA[You need to enable this so that eap.conf will be included in radiusd.conf. (Default: Disable)<br>
+									$INCLUDE sql.conf]]></description>
+			<type>select</type>
+			<default_value>#\$INCLUDE sql.conf</default_value>
+					<options>
+						<option><name>Disbale</name><value>#\$INCLUDE sql.conf</value></option>
+						<option><name>Enable</name><value>$INCLUDE sql.conf</value></option>
+					</options>
+		</field>
+		<field>
+			<fielddescr>Enable MySQL Counter</fielddescr>
+			<fieldname>varsqlconfenablecounter</fieldname>
+			<description><![CDATA[You need to enable this so that eap.conf will be included in radiusd.conf. (Default: Disable)<br>
+									$INCLUDE sql/mysql/counter.conf]]></description>
+			<type>select</type>
+			<default_value>#\$INCLUDE sql/mysql/counter.conf</default_value>
+					<options>
+						<option><name>Disbale</name><value>#\$INCLUDE sql/mysql/counter.conf</value></option>
+						<option><name>Enable</name><value>$INCLUDE sql/mysql/counter.conf</value></option>
+					</options>
+		</field>
+		<field>
+			<name>SQL Database Configuration</name>
+			<type>listtopic</type>
+		</field>
+		<field>
+			<fielddescr>Database Type</fielddescr>
+			<fieldname>varsqlconfdatabase</fieldname>
+			<description><![CDATA[Choose the database type. (Default: mysql)]]></description>
+			<type>select</type>
+			<default_value>mysql</default_value>
+					<options>
+						<option><name>MySQL</name><value>mysql</value></option>
+						<option><name>MsSQL</name><value>mssql</value></option>
+						<option><name>Oracle</name><value>oracle</value></option>
+						<option><name>PostgreSQL</name><value>postgresql</value></option>
+					</options>
+		</field>
+		<field>
+			<fielddescr>Server IP Address</fielddescr>
+			<fieldname>varsqlconfserver</fieldname>
+			<description><![CDATA[Enter the IP address of the database server (Default: localhost)]]></description>
+			<type>input</type>
+			<default_value>localhost</default_value>
+		</field>
+		<field>
+			<fielddescr>Server Port Address</fielddescr>
+			<fieldname>varsqlconfport</fieldname>
+			<description><![CDATA[Enter the port address of the database server (Default: 3306)]]></description>
+			<type>input</type>
+			<default_value>3306</default_value>
+		</field>
+		<field>
+			<fielddescr>Database Username</fielddescr>
+			<fieldname>varsqlconflogin</fieldname>
+			<description><![CDATA[Enter the username of the database server (Default: radius)]]></description>
+			<type>input</type>
+			<default_value>radius</default_value>
+		</field>
+		<field>
+			<fielddescr>Database Password</fielddescr>
+			<fieldname>varsqlconfpassword</fieldname>
+			<description><![CDATA[Enter the password of the database server (Default: radpass)]]></description>
+			<type>password</type>
+			<default_value>radpass</default_value>
+		</field>
+		<field>
+			<fielddescr>Database Table Configuration</fielddescr>
+			<fieldname>varsqlconfradiusdb</fieldname>
+			<description><![CDATA[Choose database table configuration: (Default: radius) <br>
+									For all <b>except</b> Oracle choose:  <b>radius</b> <br>
+									For Oracle change and paste the following line according your environment:<br>
+									<b>(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=your_sid)))</b>]]></description>
+			<type>input</type>
+			<default_value>radius</default_value>
+		</field>
+		<field>
+			<fielddescr>Accounting Table 1 (Start)</fielddescr>
+			<fieldname>varsqlconfaccttable1</fieldname>
+			<description><![CDATA[This is the accounting "Start" table. If you want to log "Start" and "Stop" to the same table choose the same name for both. (Default: radacct)]]></description>
+			<type>input</type>
+			<default_value>radacct</default_value>
+		</field>
+		<field>
+			<fielddescr>Accounting Table 2 (Stop)</fielddescr>
+			<fieldname>varsqlconfaccttable2</fieldname>
+			<description><![CDATA[This is the accounting "Stop" table. If you want to log "Stop" and "Stop" to the same table choose the same name for both. (Default: radacct)]]></description>
+			<type>input</type>
+			<default_value>radacct</default_value>
+		</field>
+		<field>
+			<fielddescr>Post Auth Table</fielddescr>
+			<fieldname>varsqlconfpostauthtable</fieldname>
+			<description><![CDATA[Choose Post Auth Table. (Default: radpostauth)]]></description>
+			<type>input</type>
+			<default_value>radpostauth</default_value>
+		</field>
+		<field>
+			<fielddescr>Auth Check Table</fielddescr>
+			<fieldname>varsqlconfauthchecktable</fieldname>
+			<description><![CDATA[Choose Auth Check Table. (Default: radcheck)]]></description>
+			<type>input</type>
+			<default_value>radcheck</default_value>
+		</field>
+		<field>
+			<fielddescr>Auth Reply Table</fielddescr>
+			<fieldname>varsqlconfauthreplytable</fieldname>
+			<description><![CDATA[Choose Auth Reply Table. (Default: radreply)]]></description>
+			<type>input</type>
+			<default_value>radreply</default_value>
+		</field>
+		<field>
+			<fielddescr>Group Check Table</fielddescr>
+			<fieldname>varsqlconfgroupchecktable</fieldname>
+			<description><![CDATA[Choose Group Check Table. (Default: radgroupcheck)]]></description>
+			<type>input</type>
+			<default_value>radgroupcheck</default_value>
+		</field>
+		<field>
+			<fielddescr>Group Reply Table</fielddescr>
+			<fieldname>varsqlconfgroupreplytable</fieldname>
+			<description><![CDATA[Choose Group Check Table. (Default: radgroupreply)]]></description>
+			<type>input</type>
+			<default_value>radgroupreply</default_value>
+		</field>
+		<field>
+			<fielddescr>User Group Table</fielddescr>
+			<fieldname>varsqlconfusergrouptable</fieldname>
+			<description><![CDATA[Choose Group Check Table. (Default: radusergroup)]]></description>
+			<type>input</type>
+			<default_value>radusergroup</default_value>
+		</field>
+		<field>
+			<fielddescr>Read the Group Tables</fielddescr>
+			<fieldname>varsqlconfreadgroups</fieldname>
+			<description><![CDATA[If set to <b>yes</b> (default) we read the group tables.<br>
+								If set to <b>no</b> the user <b>must</b> have Fall-Through = Yes in the radreply table]]></description>
+			<type>select</type>
+			<default_value>yes</default_value>
+					<options>
+						<option><name>Yes</name><value>yes</value></option>
+						<option><name>No</name><value>no</value></option>
+					</options>
+		</field>
+		<field>
+			<fielddescr>Delete Stale Sessions</fielddescr>
+			<fieldname>varsqlconfdeletestalesessions</fieldname>
+			<description><![CDATA[Remove stale session if checkrad does not see a double login. (Default: yes)]]></description>
+			<type>select</type>
+			<default_value>yes</default_value>
+					<options>
+						<option><name>Yes</name><value>yes</value></option>
+						<option><name>No</name><value>no</value></option>
+					</options>
+		</field>
+		<field>
+			<fielddescr>Print all SQL Statements</fielddescr>
+			<fieldname>varsqlconfsqltrace</fieldname>
+			<description><![CDATA[Print all SQL statements when in debug mode. (Default: no)]]></description>
+			<type>select</type>
+			<default_value>no</default_value>
+					<options>
+						<option><name>Yes</name><value>yes</value></option>
+						<option><name>No</name><value>no</value></option>
+					</options>
+		</field>
+		<field>
+			<fielddescr>Number of SQL Connections</fielddescr>
+			<fieldname>varsqlconfnumsqlsocks</fieldname>
+			<description><![CDATA[Number of SQL connections to make to the server. (Default: 5)]]></description>
+			<type>input</type>
+			<default_value>5</default_value>
+		</field>
+		<field>
+			<fielddescr>Failed Database Connection Delay</fielddescr>
+			<fieldname>varsqlconfconnectfailureretrydelay</fieldname>
+			<description><![CDATA[Number of seconds btween a retry after a failed database connection. (Default: 60)]]></description>
+			<type>input</type>
+			<default_value>60</default_value>
+		</field>
+		<field>
+			<fielddescr>SQL Socket Lifetime</fielddescr>
+			<fieldname>varsqlconflifetime</fieldname>
+			<description><![CDATA[If you are having network issues such as TCP sessions expiring, you may need to set the socket lifetime.  If set to non-zero, any open connections will be closed X seconds after they were first opened. (Default: 0)]]></description>
+			<type>input</type>
+			<default_value>0</default_value>
+		</field>
+		<field>
+			<fielddescr>SQL Socket Maximum Queries</fielddescr>
+			<fieldname>varsqlconfmaxqueries</fieldname>
+			<description><![CDATA[If you have issues with SQL sockets lasting too long, you can limit the number of queries performed over one socket. After X queries, the socket will be closed. Use 0 for no limit. (Default: 0)]]></description>
+			<type>input</type>
+			<default_value>0</default_value>
+		</field>
+		<field>
+			<fielddescr>Read Clients from Database</fielddescr>
+			<fieldname>varsqlconfreadclients</fieldname>
+			<description><![CDATA[Set to <b>yes</b> to read radius clients from the database ('nas' table). Clients will only be read on server startup. (Default: yes)]]></description>
+			<type>select</type>
+			<default_value>yes</default_value>
+					<options>
+						<option><name>Yes</name><value>yes</value></option>
+						<option><name>No</name><value>no</value></option>
+					</options>
+		</field>
+		<field>
+			<fielddescr>RADIUS Client Table</fielddescr>
+			<fieldname>varsqlconfnastable</fieldname>
+			<description><![CDATA[Choose the table to keep RADIUS client info. (Default: nas)]]></description>
+			<type>input</type>
+			<default_value>nas</default_value>
+		</field>
+	</fields>
+	<custom_delete_php_command>
+		freeradius_sqlconf_resync();
+		freeradius_settings_resync();
+	</custom_delete_php_command>
+	<custom_php_resync_config_command>
+		freeradius_sqlconf_resync();
+		freeradius_settings_resync();
+	</custom_php_resync_config_command>
+</packagegui>
\ No newline at end of file