move dead packages into archive to clean this up a bit. I know there are some I missed if someone else would like to review

10 files changed, 6519 insertions, 0 deletions

diff --git a/config/archive/freenas/pkg/freenas.inc b/config/archive/freenas/pkg/freenas.inc
new file mode 100644
index 00000000..b87ebfe6
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas.inc
@@ -0,0 +1,297 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+require_once("freenas_config.inc");
+
+function sync_package_freenas() {
+}
+
+function oninstall_copy_kernel_binaries($action = "install") {
+   $binaries = array();
+   $binaries[] = array("source" => "/usr/local/pkg/iscsi_initiator.ko",
+                       "target" => "/boot/kernel/iscsi_initiator.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/ext2fs.ko",
+                       "target" => "/boot/kernel/ext2fs.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/geom_concat.ko",
+                       "target" => "/boot/kernel/geom_concat.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/geom_gpt.ko",
+                       "target" => "/boot/kernel/geom_gpt.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/geom_mirror.ko",
+                       "target" => "/boot/kernel/geom_mirror.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/geom_stripe.ko",
+                       "target" => "/boot/kernel/geom_stripe.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/geom_vinum.ko",
+                       "target" => "/boot/kernel/geom_vinum.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/ntfs.ko",
+                       "target" => "/boot/kernel/ntfs.ko",
+                       "backup" => false);
+   $binaries[] = array("source" => "/usr/local/pkg/kernel.gz",
+                       "target" => "/boot/kernel/kernel.gz",
+                       "backup" => true);
+
+   if ($action == "install") {   
+     while (list(, $val) = each($binaries)) {
+       $static_output .= "FreeNAS: Moving binary file... ";
+       update_output_window($static_output);
+       if ($val['backup'] && file_exists($val['target']))
+         rename($val['target'], "{$val['target']}.org");
+       rename($val['source'], $val['target']);
+       $static_output .= "done.\n";
+       update_output_window($static_output);
+     }
+   } else if ($action == "deinstall") {
+     while (list($source, $target) = each($binaries)) {
+       $static_output .= "FreeNAS: Removing binary file... ";
+       update_output_window($static_output);
+       unlink($target);
+       $static_output .= "done.\n";
+       update_output_window($static_output);
+     }
+   }
+}
+
+function remove_package_contents($pkg = "") {
+  if ($pkg == "") { return; }
+  
+  $pd = popen("pkg_info -rf {$pkg}", "r");
+
+  if (! pd) { return; }
+
+  while (! feof($pd)) {
+    $buffer = fgets($pd, 4096);
+
+    if (strpos($buffer, "File:") !== false) {
+      $file = trim(str_replace("File:", "", $buffer));
+      
+      if (strpos($file, "man/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "share/doc/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "share/aclocal/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "include/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "libdata/pkgconfig/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "info/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "etc/rc.d/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      } else if (strpos($file, "etc/") !== false) {
+        if (strpos($file, ".dist") !== false ||
+            strpos($file, ".sample") !== false ||
+            strpos($file, ".example") !== false ||
+            strpos($file, ".default") !== false ||
+            strpos($file, ".sh") !== false) {
+          unlink_if_exists("/usr/local/{$file}");
+        }
+      } else if (strpos($file, "share/examples/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      }
+
+      /* What about locales? */
+      /*
+      } else if (strpos($file, "share/local/") !== false) {
+        unlink_if_exists("/usr/local/{$file}");
+      }
+      */
+    }
+  }
+  
+  fclose ($pd);
+}
+
+function adjust_package_contents() {
+  remove_package_contents("avahi+libdns-0.6.12");
+  remove_package_contents("ataidle-0.9");
+  remove_package_contents("perl-5.8.8");
+  remove_package_contents("libiconv-1.9.2_2");
+  remove_package_contents("libxml2-2.6.26");
+  remove_package_contents("gettext-0.14.5_2");
+  remove_package_contents("glib-2.10.3");
+  remove_package_contents("expat-2.0.0_1");
+  remove_package_contents("wzdftpd-0.7.2_1");
+  remove_package_contents("e2fsprogs-1.39_1");
+  remove_package_contents("smartmontools-5.36");
+  remove_package_contents("aaccli-1.0");
+  remove_package_contents("rsync-2.6.8_2");
+  remove_package_contents("scponly-4.6_1");
+  remove_package_contents("cracklib-2.7_2");
+  remove_package_contents("samba-3.0.23,1");
+  remove_package_contents("netatalk-2.0.3_3,1");
+  remove_package_contents("pam_ldap-1.8.2");
+}
+
+function oninstall_copy_misc_binaries($action = "install") {
+   $binaries = array();
+   $binaries[] = array("source" => "/usr/local/pkg/iscontrol",
+                       "target" => "/usr/local/sbin/iscontrol");
+   $binaries[] = array("source" => "/usr/local/pkg/nfsd",
+                       "target" => "/usr/sbin/nfsd");
+   $binaries[] = array("source" => "/usr/local/pkg/nfsd",
+                       "target" => "/usr/sbin/mountd");
+   $binaries[] = array("source" => "/usr/local/pkg/rpcbind",
+                       "target" => "/usr/sbin/rpcbind");
+   $binaries[] = array("source" => "/usr/local/pkg/rpc.lockd",
+                       "target" => "/usr/sbin/rpc.lockd");
+   $binaries[] = array("source" => "/usr/local/pkg/rpc.lockd",
+                       "target" => "/usr/sbin/rpc.lockd");
+                       
+   if ($action == "install") {
+     while (list(, $val) = each($binaries)) {
+       $static_output .= "FreeNAS: Installing binary file... ";
+       update_output_window($static_output);
+       mwexec("install -s {$source} ${target}");
+       $static_output .= "done.\n";
+       update_output_window($static_output);
+     }
+   } else if ($action == "deinstall") {
+     while (list($val['source'], $val['target']) = each($binaries)) {
+       $static_output .= "FreeNAS: Removing binary file... ";
+       update_output_window($static_output);
+       unlink($target);
+       $static_output .= "done.\n";
+       update_output_window($static_output);
+     }
+   }
+}
+
+function oninstall_setup_config() {
+  global $config;
+  
+  $config['system']['zeroconf_disable'] = "yes";
+  
+  $freenas_config =& $config['installedpackages']['freenas']['config'][0];
+  
+  if (!is_array($freenas_config['disks']))
+    $freenas_config['disks'] = array();
+  if (!is_array($freenas_config['mounts']))
+    $freenas_config['mounts'] = array();
+    
+  if (!is_array($freenas_config['samba']))
+    $freenas_config['samba'] = array();    
+  $freenas_config['samba']['netbiosname'] = "freenas";
+  $freenas_config['samba']['workgroup'] = "WORKGROUP";
+  $freenas_config['samba']['serverdesc'] = "pfSense Server";
+  $freenas_config['samba']['security'] = "share";
+  $freenas_config['samba']['localmaster'] = "yes";
+  
+  if (!is_array($freenas_config['ftp']))
+    $freenas_config['ftp'] = array();
+  $freenas_config['ftp']['numberclients'] = "5";
+  $freenas_config['ftp']['maxconperip'] = "2";
+  $freenas_config['ftp']['timeout'] = "300";
+  $freenas_config['ftp']['port'] = "21";
+  $freenas_config['ftp']['anonymous'] = "yes";
+  $freenas_config['ftp']['pasv_max_port'] = "0";
+  $freenas_config['ftp']['pasv_min_port'] = "0";
+  
+  if (!is_array($freenas_config['afp']))
+    $freenas_config['afp'] = array();
+    
+  if (!is_array($freenas_config['rsyncd']))
+    $freenas_config['rsyncd'] = array();
+  $freenas_config['rsyncd']['readonly'] = "no";
+  $freenas_config['rsyncd']['port'] = "873";
+  
+  if (!is_array($freenas_config['nfs']))
+    $freenas_config['nfs'] = array();
+}
+
+function custom_php_install_command() {
+  global $g;
+
+  oninstall_copy_kernel_binaries();
+  oninstall_copy_misc_binaries();
+  adjust_package_contents();
+  oninstall_setup_config();
+  
+  if (! file_exists("/usr/local/etc/rc.d"))
+    mwexec("mkdir -p /usr/local/etc/rc.d");
+
+  if (! file_exists("{$g['varrun_path']}/dbus"))
+    mkdir("{$g['varrun_path']}/dbus");
+
+  if (! file_exists("{$g['varrun_path']}/avahi-daemon"))
+    mkdir("{$g['varrun_path']}/avahi-daemon");
+
+  rename("/usr/local/pkg/rc.freenas", "/usr/local/etc/rc.d/freenas.sh");
+  chmod ("/usr/local/etc/rc.d/freenas.sh", 0755);
+
+  mwexec("ln -s /usr/local/etc/uams/uams_passwd.so /usr/local/etc/uams/uams_clrtxt.so");
+  mwexec("ln -s /usr/local/etc/uams/uams_dhx_passwd.so /usr/local/etc/uams/uams_dhx.so");
+  /* hack cause I linked netatalk against db44 instead of db42 */
+  mwexec("ln -s /usr/local/lib/libdb-4.4.so.0 /usr/local/lib/libdb-4.2.so.2");
+}
+
+function custom_php_deinstall_command() {
+  global $config, $g;
+
+  oninstall_copy_kernel_binaries("deinstall");
+  oninstall_copy_misc_binaries("deinstall");
+
+  if (! file_exists("/usr/local/etc/rc.d"))
+    mwexec("rm -rf /usr/local/etc/rc.d");
+
+  if (! file_exists("{$g['varrun_path']}/dbus"))
+    mwexec("rm -rf {$g['varrun_path']}/dbus");
+
+  if (! file_exists("{$g['varrun_path']}/avahi-daemon"))
+    mwexec("rm -rf {$g['varrun_path']}/avahi-daemon");
+
+  unlink_if_exists("/usr/local/etc/uams/uams_clrtxt.so");
+  unlink_if_exists("/usr/local/etc/uams/uams_dhx.so");
+  unlink_if_exists("/usr/local/etc/rc.d/freenas.sh");
+  unlink_if_exists("/usr/local/lib/libdb-4.2.so.2");
+
+  unset($config['installedpackages']['freenas']);
+  write_config();
+  conf_mount_ro();
+}
+?>
diff --git a/config/archive/freenas/pkg/freenas.xml b/config/archive/freenas/pkg/freenas.xml
new file mode 100644
index 00000000..edac8085
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas.xml
@@ -0,0 +1,570 @@
+<?xml version="1.0" encoding="utf-8" ?>
+<!DOCTYPE packagegui SYSTEM "../../schema/packages.dtd">
+<?xml-stylesheet type="text/xsl" href="../../xsl/package.xsl"?>
+<packagegui>
+        <copyright>
+        <![CDATA[
+/* $Id$ */
+/* ========================================================================== */
+/*
+    authng.xml
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2007 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+        ]]>
+        </copyright>
+  <description>Describe your package here</description>
+  <requirements>Describe your package requirements here</requirements>
+  <faq>Currently there are no FAQ items provided.</faq>
+  <name>freenas</name>
+  <version>1.0</version>
+  <title>System: Disks: Management</title>
+  <include_file>/usr/local/pkg/freenas.inc</include_file>
+  <!-- Menu is where this packages menu will appear -->
+  <menu>
+    <name>Disks</name>
+    <section>System</section>
+    <url>/disks_manage.php</url>
+  </menu>
+  <menu>
+    <name>RAID</name>
+    <section>System</section>
+    <url>/disks_raid_gmirror.php</url>
+  </menu>
+  <menu>
+    <name>Mounts</name>
+    <section>System</section>
+    <url>/disks_mount.php</url>
+  </menu>
+  <menu>
+    <name>FreeNAS Infos</name>
+    <section>Diagnostics</section>
+    <url>/diag_disk_infos.php</url>
+  </menu>
+  <menu>
+    <name>FreeNAS Logs</name>
+    <section>Diagnostics</section>
+    <url>/diag_fn_logs_samba.php</url>
+  </menu>
+  <menu>
+    <name>Disk Status</name>
+    <section>Status</section>
+    <url>/status_disks.php</url>
+  </menu>
+  <menu>
+    <name>AFP</name>
+    <section>Services</section>
+    <url>/services_afp.php</url>
+  </menu>
+  <menu>
+    <name>FTP</name>
+    <section>Services</section>
+    <url>/services_ftp.php</url>
+  </menu>
+  <menu>
+    <name>NFS</name>
+    <section>Services</section>
+    <url>/services_nfs.php</url>
+  </menu>
+  <menu>
+    <name>Rsync</name>
+    <section>Services</section>
+    <url>/services_rsyncd.php</url>
+  </menu>
+  <menu>
+    <name>Samba</name>
+    <section>Services</section>
+    <url>/services_samba.php</url>
+  </menu>
+  <menu>
+    <name>Unison</name>
+    <section>Services</section>
+    <url>/services_unison.php</url>
+  </menu>
+  <!--
+  <service>
+    <name>dspam</name>
+    <rcfile>/usr/local/etc/rc.d/dspam.sh</rcfile>
+  </service>
+  -->
+  <tabs />
+  <!--
+    configpath gets expanded out automatically and config items
+    will be stored in that location
+  -->
+  <configpath>['installedpackages']['freenas']['config']</configpath>
+  <!-- PHP files  (disk management) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_manage.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_manage_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_manage_init.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_manage_iscsi.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_manage_tools.php</item>
+  </additional_files_needed>
+  <!-- PHP files  (RAID management) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gmirror.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gmirror_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gmirror_infos.php</item>
+  </additional_files_needed>
+  <!--
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gmirror_init.php</item>
+  </additional_files_needed>
+  -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gmirror_tools.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gvinum.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gvinum_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gvinum_infos.php</item>
+  </additional_files_needed>
+  <!--
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gvinum_init.php</item>
+  </additional_files_needed>
+  -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gvinum_tools.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gconcat.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gconcat_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gconcat_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gconcat_tools.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gstripe.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gstripe_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gstripe_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_gstripe_tools.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_graid5.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_graid5_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_graid5_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_raid_graid5_tools.php</item>
+  </additional_files_needed>
+  <!-- PHP files  (mount management) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_mount.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_mount_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/disks_mount_tools.php</item>
+  </additional_files_needed>
+  <!-- PHP files  (diagnostics) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_ad_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_ataidle_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_disk_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_iscsi_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_mounts_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_part_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_raid_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_smart_infos.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_space_infos.php</item>
+  </additional_files_needed>
+  <!-- PHP files  (logs) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_daemon.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_ftp.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_rsyncd.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_samba.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_settings.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_smartd.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/diag_fn_logs_sshd.php</item>
+  </additional_files_needed>
+  <!-- PHP files  (services) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_afp.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_ftp.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_nfs.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_nfs_export.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_nfs_export_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_rsyncd.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_rsyncd_client.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_rsyncd_local.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_samba.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_samba_share.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_samba_edit.php</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/services_unison.php</item>
+  </additional_files_needed>
+  <!-- PHP files  (misc) -->
+  <additional_files_needed>
+    <prefix>/usr/local/www/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/www/status_disks.php</item>
+  </additional_files_needed>
+  <!-- package files -->
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_disks.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_config.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_functions.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_guiconfig.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_services.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_utils.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/freenas_system.inc</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/pkg/rc.freenas</item>
+  </additional_files_needed>
+  <!-- kernel binaries -->
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/iscsi_initiator.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/ext2fs.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/geom_concat.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/geom_gpt.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/geom_mirror.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/geom_stripe.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/geom_vinum.ko</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/kernel.gz</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/ntfs.ko</item>
+  </additional_files_needed>
+  <!-- misc binaries -->
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/iscontrol</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/mountd</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/nfsd</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/rpcbind</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/rpc.lockd</item>
+  </additional_files_needed>
+  <additional_files_needed>
+    <prefix>/usr/local/pkg/</prefix>
+    <chmod>0755</chmod>
+    <item>http://www.pfsense.com/packages/config/freenas/bin/rpc.statd</item>
+  </additional_files_needed>
+  <!--
+    fields gets invoked when the user adds or edits a item. The following items
+    will be parsed and rendered for the user as a gui with input, and selectboxes.
+  -->
+  <!--
+    Arbitrary PHP Code, that gets executed if a certain event gets triggered.
+  -->
+  <custom_php_resync_config_command>
+    sync_package_freenas();
+  </custom_php_resync_config_command>
+  <custom_php_install_command>
+    custom_php_install_command();
+  </custom_php_install_command>
+  <custom_php_deinstall_command>
+    custom_php_deinstall_command();
+  </custom_php_deinstall_command>
+</packagegui>
diff --git a/config/archive/freenas/pkg/freenas_config.inc b/config/archive/freenas/pkg/freenas_config.inc
new file mode 100644
index 00000000..fc139228
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_config.inc
@@ -0,0 +1,45 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas_config.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+$GLOBALS['custom_listtags'] = array("disk", "mount", "vdisk");
+
+?>
\ No newline at end of file
diff --git a/config/archive/freenas/pkg/freenas_disks.inc b/config/archive/freenas/pkg/freenas_disks.inc
new file mode 100644
index 00000000..0946164f
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_disks.inc
@@ -0,0 +1,1256 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas_disks.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+/* include all configuration functions */
+require_once("functions.inc");
+require_once("freenas_functions.inc");
+
+$freenas_config =& $config['installedpackages']['freenas']['config'][0];
+
+/* Mount all configured disks */
+function disks_mount_all() {
+  global $freenas_config, $g;
+
+  if ($g['booting'])
+    echo "Mounting Partitions... ";
+
+  /* For each device configured: */
+  if (is_array($freenas_config['mounts']['mount'])) {
+    foreach ($freenas_config['mounts']['mount'] as $mountent) {
+      /* Advanced Umount filesystem if not booting mode (mount edition) */
+      if (!$g['booting'])
+        disks_umount_adv($mountent);
+
+      /* mount filesystem */
+      disks_mount($mountent);
+    } // end foreach
+  } // end if
+
+  if ($g['booting'])
+    echo "done\n";
+
+  return 0;
+}
+
+/* Mount using the configured mount given in parameter
+ * Return 0 if sucessful, 1 if error
+ */
+function disks_mount($mount) {
+  global $freenas_config, $g;
+
+  /* Create one directory for each device under mnt */
+
+  $mountname=escapeshellcmd($mount['sharename']);
+
+  @mkdir ("/mnt/$mountname",0777);
+
+  /* mount the filesystems */
+  $devname=escapeshellcmd($mount['fullname']);
+
+  /* check the fileystem only if there is a problem*/
+  /* This part is too stupid: I must read the FreBSD 
+   * start script for use the same intelligent method 
+   * for checking hard drive
+   */
+  switch ($mount['fstype']) {
+    case "ufs":
+      if (mwexec("/sbin/mount -t ufs  -o acls $devname /mnt/$mountname") == 0) {
+        /* Change this directory into 777 mode */
+        mwexec("/bin/chmod 777 /mnt/$mountname");
+        $result = 0;
+      } else {
+        /* If it's NOK, Check  filesystem and do a fsck, answer Yes to all question*/
+        mwexec("/sbin/fsck -y -t ufs $devname");
+
+        /* Re-try to mount the partition */
+        if (mwexec("/sbin/mount -t ufs -o acls $devname /mnt/$mountname") == 0) {
+          /* Change this directory into 777 mode */
+          mwexec("/bin/chmod 777 /mnt/$mountname");
+          $result = 0;
+        } else {
+          /* Not OK, remove the directory, prevent writing on RAM disk*/
+          @rmdir ("/mnt/$mountname");
+          $result = 1;
+        } // end if
+      } // end if
+      break;
+    case "msdosfs":
+      if (mwexec("/sbin/mount_msdosfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
+        $result = 0;
+      } else {
+        exec("/sbin/fsck -y -t msdosfs {$devname}");
+        
+        if (mwexec("/sbin/mount_msdosfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
+          $result = 0;
+        } else {
+          /* Not OK, remove the directory, prevent writing on RAM disk*/
+          @rmdir ("/mnt/$mountname");
+          $result = 1;
+        }
+      }
+      break;
+    case "ntfs":
+      if (mwexec("/sbin/mount_ntfs -u ftp -g ftp -m 777 $devname /mnt/$mountname") == 0) {
+        $result = 0;
+      } else {
+        /* Not OK, remove the directory, prevent writing on RAM disk */
+        @rmdir ("/mnt/$mountname");
+        $result = 1;
+      }
+      break;
+    case "ext2fs":
+      if (mwexec("/sbin/mount_ext2fs $devname /mnt/$mountname") == 0) {
+        /* Change this directory into 777 mode */
+        mwexec("/bin/chmod 777 /mnt/$mountname");
+        $result = 0;
+      } else {
+        exec("/usr/local/sbin/e2fsck -f -p {$devname}");
+        
+        if (mwexec("/sbin/mount_ext2fs $devname /mnt/$mountname") == 0) {
+          /* Change this directory into 777 mode */
+          mwexec("/bin/chmod 777 /mnt/$mountname");
+          $result = 0;
+        } else {
+          /* Not OK, remove the directory, prevent writing on RAM */
+          @rmdir ("/mnt/$mountname");
+          $result= 1;
+        }
+      }
+      break;
+  } // end switch
+
+  return $result;
+}
+
+/* Mount using fullname (/dev/ad0s1) given in parameter*/
+function disks_mount_fullname($fullname) {
+  global $freenas_config;
+
+  if (is_array($freenas_config['mounts']['mount'])) {
+    /* Search the mount list for given disk and partition */
+    foreach($freenas_config['mounts']['mount'] as $mountk => $mountv) {
+      if($mountv['fullname'] == $fullname) {
+        $mount = $mountv;
+      }
+    }
+  }
+
+  if($mount) {
+    $result= disks_mount($mount);
+  } else {
+    $result=0;
+  }
+
+  return $result;
+}
+
+/* Umount the specified configured mount point
+ * Return 0 is successfull, 1 if error
+ */
+function disks_umount($mount) {
+  global $freenas_config, $g;
+
+  /* Umout the specified mount point */
+  /* The $mount variable is the all config table for the mount point*/
+  $mountname=escapeshellcmd($mount['sharename']);
+
+  if (mwexec("/sbin/umount /mnt/$mountname") == 0) {
+    if (@rmdir ("/mnt/$mountname")) {
+      return 0;
+    } else {
+      return 1;
+    }
+  } else {
+    return 1;
+  }
+}
+
+/* Advanced unmount the specified mount point without using the sharename value
+ * Used when changing the 'sharename': Need to umount the old unknow sharename
+ * Return 0 if successful, 1 if error 
+ */
+function disks_umount_fullname($fullname) {
+  global $freenas_config;
+
+  /* Search the mount list for given fullname */
+  foreach($freenas_config['mounts']['mount'] as $mountk => $mountv) {
+    if (strcmp($mountv['fullname'],$fullname) == 0) {
+      $mount = $mountv;
+    }
+  }
+
+  if($mount) {
+    $result = disks_umount($mount);
+  } else {
+    $result= 1;
+  }
+
+  return $result;
+}
+
+/* Advanced unmount the specified mount point without using the sharename value
+ * Used when changing the 'sharename': Need to umount the old unknow sharename
+ * Return 0 if successful, 1 if error 
+ */
+function disks_umount_adv($mount)
+{
+  $fulname="{$mount['fullname']}";
+
+  // get the mount list
+  $detmount = get_mounts_list();
+
+  //Look for the mount point in all mounted point
+  foreach ($detmount as $detmountk => $detmountv) {
+    // If we found the mount point on the device
+    if (strcmp($detmountv['fullname'],$fullname) == 0) {
+      $mountname="{$detmountv['mp']}";
+    }
+  }
+
+  if ($mountname) {
+    exec("/sbin/umount $mountname");
+    @rmdir ("$mountname");
+    return 0;
+  } else {
+    $result = 1;
+  }
+
+  return $result;
+}
+
+function disks_mount_status($mount) {
+  // This option check if the mount are mounted
+  global $freenas_config, $g;
+  $detmount = get_mounts_list();
+  $status="ERROR";
+
+  // Recreate the full system name device+s+partition number
+  /* mount the filesystems */
+  $mountpart="{$mount['partition']}";
+
+  if ((strcmp($mountpart,"gvinum") == 0) || (strcmp($mountpart,"gmirror") == 0)) {
+    $complete = "{$mount['mdisk']}";
+  } else {
+    $complete = "{$mount['mdisk']}{$mount['partition']}";
+  }
+
+  //echo "debug, display complete: $complete <br>";
+
+  foreach ($detmount as $detmountk => $detmountv) {
+    //echo "debug, display detmountv[mdisk]: {$detmountv['mdisk']} <br>";
+        
+    if (strcmp($detmountv['mdisk'],$complete) == 0) {
+      $status="OK";
+      return $status;
+    }        
+  }
+
+  return $status;
+}
+
+/* This option check if this fullname (/dev/ad0s1) is mounted
+ * Return 0 if not, 1 if yes
+ */
+function disks_check_mount_fullname($fullname) {
+  $detmount = get_mounts_list();
+  $status=0;
+  //print_r($detmount);
+  
+  foreach ($detmount as $detmountk => $detmountv) {
+    if (strpos($detmountv['fullname'],$fullname) !== false) {
+      $status=1;
+      break;
+    }
+  }
+
+  return $status;
+}
+
+/* This option check if the configured mount is mounted. */
+function disks_check_mount($mount)
+{
+  return disks_check_mount_fullname($mount['fullname']);
+}
+
+/* This function check if the disk is mounted
+ * Return 0 if not, 1 if yes 
+ */
+function disks_check_mount_disk($disk) {
+  $detmount = get_mounts_list();
+  $status=0;
+
+  foreach ($detmount as $detmountk => $detmountv) {
+  /* Must found the $disk (ad0) in result $mdisk (ad0s1) */
+  // strpos will return 0 (found at position 0) if found, must check the 'false' value
+  if (strpos($detmountv['mdisk'], $disk) !== false ) {
+    $status=1;
+    break;
+  }
+}
+return $status;
+}
+
+/* This option check if the configured disk is online (detected by the system)
+ * Result: "MISSING", disk don't detected by OS
+ * Result: "ONLINE", disk is online
+ * Result: "CHANGED", disk have changed (be replaced ?)
+ */
+function disks_status($diskname) {
+  // This option check if the configured disk is online
+  global $freenas_config, $g;
+  $detectedlist = get_physical_disks_list();
+  $status="MISSING";
+  
+  foreach ($detectedlist as $detecteddisk => $detecteddiskv) {
+    if ($detecteddisk == $diskname['name']) {
+      $status="ONLINE";
+      if (($detecteddiskv['size'] != $diskname['size']) || ($detecteddiskv['desc'] != $diskname['desc'])) {
+        $status="CHANGED";
+      }
+      break;
+    }
+  }
+  
+  return $status;
+}
+
+function disks_addfstab($cfgdev,$cfgtype) {
+  global $freenas_config, $g;
+
+  /* Open or create fstab in RW */
+  $fd = fopen("{$g['etc_path']}/fstab", "w");
+
+  if ( $fd ) {
+    /* check for the precence of dev */
+    /* ADD (check if it's ADD line or replace) the line for the dev */
+    $fstab = "/dev/$cfgdev /mnt/$cfgdev $cfgtype rw 1 1\n";
+                
+    /* write out an fstab */
+    fwrite($fd, $fstab);
+
+    /* close file */
+    fclose($fd);
+  } else {
+    die( "fopen failed for {$g['etc_path']}/fstab" ) ;
+  }
+}
+
+function disks_umount_all() {
+  global $freenas_config, $g;
+
+  /* Sync disks*/
+  mwexec("/bin/sync");
+
+  if (is_array($freenas_config['mounts']['mount'])) {
+    foreach ($freenas_config['mounts']['mount'] as $mountent) {
+      /* Umount filesystem */
+      disks_umount($mountent);
+    }
+  }
+
+  return 0;
+}
+
+/* Configure, create and start gvinum volume */
+function disks_raid_gvinum_configure() {
+  global $freenas_config, $g;
+
+  /* Generate the raid.conf file */
+  if ($freenas_config['gvinum']['vdisk']) {
+
+    foreach ($freenas_config['gvinum']['vdisk'] as $a_raid_conf) {
+      if (file_exists($g['varrun_path'] . "/raid.conf.dirty") && 
+          !in_array("{$a_raid_conf['name']}\n", file($g['varrun_path'] . "/raid.conf.dirty"))) { continue; }
+        
+      /* generate raid.conf */
+      $fd = fopen("{$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf", "w");
+      if (!$fd) {
+        printf("Error: cannot open raid.conf in services_raid_configure().\n");
+        return 1;
+      }
+
+      $raidconf="";
+      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+        $raidconf .= <<<EOD
+drive disk_{$diskrv} device {$diskrv}
+
+EOD;
+      } // end foreach
+                 
+      $raidconf .= <<<EOD
+volume {$a_raid_conf['name']}
+
+EOD;
+
+      switch ($a_raid_conf['type']) {
+        case "0":
+          $raidconf .= <<<EOD
+plex org striped 256k
+
+EOD;
+
+          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+            /* Get the disksize */
+            $disksize=get_disks_size($diskrv);
+            /* Remove the ending 'B' in 'MB' */
+            $disksize=rtrim($disksize, 'B');
+            /*
+            $raidconf .= <<<EOD
+sd length {$disksize} drive disk_{$diskrv}
+
+EOD;
+*/
+                                                
+            $raidconf .= <<<EOD
+sd length 0 drive disk_{$diskrv}
+
+EOD;
+        
+          } // end foreach
+          break;
+        case "1":
+          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+            $raidconf .= <<<EOD
+plex org concat
+
+EOD;
+                                                
+            /* Get the disksize */
+            $disksize=get_disks_size($diskrv);
+            /* Remove the ending 'B' in 'MB' */
+            $disksize=rtrim($disksize, 'B');
+            /*
+            $raidconf .= <<<EOD
+sd length {$disksize} drive disk_{$diskrv}
+
+EOD;
+*/
+            $raidconf .= <<<EOD
+sd length 0 drive disk_{$diskrv}
+
+EOD;
+        
+          } // end foreach
+          break;
+        case "5":
+          $raidconf .= <<<EOD
+plex org raid5 256k
+
+EOD;
+
+          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+            /* Get the disksize */
+            $disksize=get_disks_size($diskrv);
+            /* Remove the ending 'B' in 'MB' */
+            $disksize=rtrim($disksize, 'B');
+            /*
+            $raidconf .= <<<EOD
+sd length {$disksize} drive disk_{$diskrv}
+
+EOD;
+*/
+
+            $raidconf .= <<<EOD
+sd length 0 drive disk_{$diskrv}
+
+EOD;
+        
+          } // end foreach
+          break;
+      } // end switch
+    
+      fwrite($fd, $raidconf);
+      fclose($fd);
+
+      /* Create each volume */        
+      mwexec("/sbin/gvinum create {$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf");        
+    } // end foreach
+                                        
+        
+    /* start each volume */
+        
+    foreach ($freenas_config['gvinum']['vdisk'] as $a_raid_conf) {
+      exec("/sbin/gvinum lv $raidname",$rawdata);
+    
+      if (strpos($rawdata[0],"State: up")>=0) { continue; }
+
+      mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
+    }        
+  } // end if
+
+  return 0;
+}
+
+function disks_raid_configure()
+{
+  global $freenas_config, $g;
+
+  /* Generate the raid.conf file */
+  if ($freenas_config['raid']['vdisk']) {        
+    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
+      if (file_exists($g['varrun_path'] . "/raid.conf.dirty") && 
+          ! in_array("{$a_raid_conf['name']}\n",file($g['varrun_path'] . "/raid.conf.dirty"))) { continue; }
+        
+      /* generate raid.conf */
+      $fd = fopen("{$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf", "w");
+      
+      if (!$fd) {
+        printf("Error: cannot open raid.conf in services_raid_configure().\n");
+        return 1;
+      }
+
+      $raidconf="";
+      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+        $raidconf .= <<<EOD
+drive disk_{$diskrv} device /dev/{$diskrv}s1a
+
+EOD;
+
+      } // end foreach
+
+      $raidconf .= <<<EOD
+volume {$a_raid_conf['name']}
+
+EOD;
+
+      switch ($a_raid_conf['type']) {
+        case "0":
+          $raidconf .= <<<EOD
+plex org striped 256k
+
+EOD;
+
+          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+            /* Get the disksize */
+            $disksize=get_disks_size($diskrv);
+            /* Remove the ending 'B' in 'MB' */
+            $disksize=rtrim($disksize, 'B');
+            /*
+            $raidconf .= <<<EOD
+sd length {$disksize} drive disk_{$diskrv}
+
+EOD;
+*/
+
+$raidconf .= <<<EOD
+sd length 0 drive disk_{$diskrv}
+
+EOD;
+
+          } // end foreach
+          break;
+        case "1":
+          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+            $raidconf .= <<<EOD
+plex org concat
+
+EOD;
+
+          /* Get the disksize */
+          $disksize=get_disks_size($diskrv);
+          /* Remove the ending 'B' in 'MB' */
+          $disksize=rtrim($disksize, 'B');
+          /*
+          $raidconf .= <<<EOD
+sd length {$disksize} drive disk_{$diskrv}
+
+EOD;
+*/
+
+          $raidconf .= <<<EOD
+sd length 0 drive disk_{$diskrv}
+
+EOD;
+
+          } // end foreach
+          break;
+        case "5":
+          $raidconf .= <<<EOD
+plex org raid5 256k
+
+EOD;
+
+          foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+            /* Get the disksize */
+            $disksize=get_disks_size($diskrv);
+            /* Remove the ending 'B' in 'MB' */
+            $disksize=rtrim($disksize, 'B');
+            /*
+            $raidconf .= <<<EOD
+sd length {$disksize} drive disk_{$diskrv}
+
+EOD;
+*/
+
+            $raidconf .= <<<EOD
+sd length 0 drive disk_{$diskrv}
+
+EOD;
+
+          } // end foreach
+          break;
+      } // end switch
+      
+      fwrite($fd, $raidconf);
+      fclose($fd);
+
+      /* Create each volume */
+      mwexec("/sbin/gvinum create {$g['varetc_path']}/raid-{$a_raid_conf['name']}.conf");
+    } // end foreach
+
+    /* start each volume */
+    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
+      exec("/sbin/gvinum lv $raidname",$rawdata);
+      if (strpos($rawdata[0],"State: up")>=0) { continue; }
+      mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
+    }
+  } // end if
+  
+  return 0;
+}
+
+/* Configure, create and start gmirror volume */
+function disks_raid_gmirror_configure() {
+  global $freenas_config, $g;
+
+  /* Create the gmirror device */
+  if ($freenas_config['gmirror']['vdisk']) {        
+    // Load gmirror
+    mwexec("/sbin/gmirror load");
+                        
+    foreach ($freenas_config['gmirror']['vdisk'] as $a_raid_conf) {
+      /* Create each volume */
+      $cmd = "/sbin/gmirror label -b {$a_raid_conf['balance']} {$a_raid_conf['name']} ";
+                
+      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+        $cmd .= "{$diskrv} ";
+      }
+        
+      mwexec($cmd);
+    }
+  }
+
+  return 0;
+}
+
+/* Configure, create and start gconcat volume */
+function disks_raid_gconcat_configure() {
+  global $freenas_config, $g;
+
+  if ($freenas_config['gconcat']['vdisk']) {
+    // Load gconcat
+    mwexec("/sbin/gconcat load");
+                        
+    foreach ($freenas_config['gconcat']['vdisk'] as $a_raid_conf) {
+      /* Create each volume */
+      $cmd = "/sbin/gconcat label {$a_raid_conf['name']} ";
+                
+      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+        $cmd .= "{$diskrv} ";
+      }
+        
+      mwexec($cmd);
+        
+    }
+  }
+
+  return 0;
+}
+
+/* Configure, create and start gstripe volume */
+function disks_raid_gstripe_configure() {
+  global $freenas_config, $g;
+
+  if ($freenas_config['gstripe']['vdisk']) {
+    // Load gstripe
+    mwexec("/sbin/gstripe load");
+
+    foreach ($freenas_config['gstripe']['vdisk'] as $a_raid_conf) {
+      /* Create each volume */
+      $cmd = "/sbin/gstripe label {$a_raid_conf['name']} ";
+
+      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+        $cmd .= "{$diskrv} ";
+      }
+
+      mwexec($cmd);
+    }
+  }
+
+  return 0;
+}
+
+/* Configure, create and start graid5 volume */
+
+function disks_raid_graid5_configure()
+{
+  global $freenas_config, $g;
+
+  if ($freenas_config['graid5']['vdisk']) {
+    /* Load graid5 */
+    mwexec("/sbin/graid5 load");
+
+    foreach ($freenas_config['graid5']['vdisk'] as $a_raid_conf) {
+      /* Create each volume */
+      $cmd = "/sbin/graid5 label -s 131072 {$a_raid_conf['name']} ";
+
+      foreach ($a_raid_conf['diskr'] as $diskrk => $diskrv) {
+        $cmd .= "{$diskrv} ";
+      }
+
+      mwexec($cmd);
+    }
+  }
+
+  return 0;
+}
+
+function disks_raid_start() {
+  global $freenas_config, $g;
+
+  /* WARNING:  Must change this code for advanced RAID configuration ex: RAID1+0
+   * Geom RAID volume must be started in 'intelligent' sort, for RAID1+0, gmirror must
+   * be started before gstripe, etc... 
+   */
+  disks_raid_gvinum_start();
+  disks_raid_gmirror_start();
+  disks_raid_gstripe_start();
+  disks_raid_gconcat_start();
+  disks_raid_graid5_start();
+        
+  return 0;
+}
+
+
+function disks_raid_gvinum_start() {
+  global $freenas_config, $g;
+
+  /* Generate the raid.conf file */
+  if ($freenas_config['raid']['vdisk']) {
+    if ($g['booting'])
+      echo "Start gvinum raid... ";
+
+    /* start each volume */
+    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
+      mwexec("/sbin/gvinum start {$a_raid_conf['name']}");
+    }
+        
+    if ($g['booting'])
+      echo "done\n";
+  }
+
+  return 0;
+}
+
+function disks_raid_gmirror_start() {
+  global $freenas_config, $g;
+
+  /* Start Geom mirror */
+  if ($freenas_config['gmirror']['vdisk']) {
+    if ($g['booting'])
+      echo "Start gmirror raid... ";
+
+    // Load geom mirror module        
+    mwexec("/sbin/gmirror load");
+        
+    if ($g['booting'])
+      echo "done\n";
+  }
+
+  return 0;
+}
+
+/* Start geom concat volumes */
+function disks_raid_gconcat_start() {
+  global $freenas_config, $g;
+
+/* Start Geom concat */
+  if ($freenas_config['gconcat']['vdisk']) {
+    if ($g['booting'])
+      echo "Start gconcat raid... ";
+
+    // Load geom concat module
+    mwexec("/sbin/gconcat load");
+        
+    if ($g['booting'])
+      echo "done\n";
+  }
+
+  return 0;
+}
+
+/* Start geom stripe volumes */
+function disks_raid_gstripe_start() {
+  global $freenas_config, $g;
+
+  /* Start Geom stripe */
+  if ($freenas_config['gstripe']['vdisk']) {
+    if ($g['booting'])
+      echo "Start gstripe raid... ";
+
+    // Load geom stripe module
+    mwexec("/sbin/gstripe load");
+        
+    if ($g['booting'])
+      echo "done\n";        
+  }
+
+  return 0;
+}
+
+/* Start geom raid5 volumes */
+function disks_raid_graid5_start() {
+  global $freenas_config, $g;
+
+  /* Start Geom RAID5 */
+  if ($freenas_config['graid5']['vdisk']) {
+    if ($g['booting'])
+      echo "Start graid5 raid... ";
+
+    // Load geom raid5 module
+    mwexec("/sbin/graid5 load");
+        
+    if ($g['booting'])
+      echo "done\n";
+  }
+
+  return 0;
+}
+
+function disks_raid_stop() {
+  /* WARNING:  Must change this code for advanced RAID configuration ex: RAID1+0
+   * Geom RAID volume must be started in 'intelligent' sort, for RAID1+0, gmirror must
+   * be started before gstripe, etc... 
+   */
+  disks_raid_gvinum_stop();
+  disks_raid_graid5_stop();
+  disks_raid_gstripe_stop();
+  disks_raid_gconcat_stop();
+  disks_raid_gmirror_stop();
+
+  return 0;
+}
+
+function disks_raid_gvinum_stop() {
+  global $freenas_config, $g;
+
+  /* Generate the raid.conf file */
+  if ($freenas_config['raid']['vdisk']) {
+    /* stop each volume */
+    foreach ($freenas_config['raid']['vdisk'] as $a_raid_conf) {
+      mwexec("/sbin/gvinum stop {$a_raid_conf['name']}");
+    }
+  }
+
+  return 0;
+}
+
+function disks_raid_gmirror_stop() {
+  global $freenas_config, $g;
+
+  /* Generate the raid.conf file */
+  if ($freenas_config['gmirror']['vdisk']) {
+    /* start each volume */
+    foreach ($freenas_config['gmirror']['vdisk'] as $a_raid_conf) 	{
+      mwexec("/sbin/gmirror stop {$a_raid_conf['name']}");
+    }
+  }
+
+  return 0;
+}
+
+/* Stop all geom concat volumes */
+function disks_raid_gconcat_stop() {
+  global $freenas_config, $g;
+  
+  /* Stop geom concat */
+  if ($freenas_config['gconcat']['vdisk']) {
+    /* start each volume */
+    foreach ($freenas_config['gconcat']['vdisk'] as $a_raid_conf) {
+      mwexec("/sbin/gconcat stop {$a_raid_conf['name']}");   
+    }        
+  }
+
+  return 0;
+}
+
+/* Stop all geom stripe volumes */
+function disks_raid_gstripe_stop() {
+  global $freenas_config, $g;
+
+  /* Stop geom stripe */
+  if ($freenas_config['gstripe']['vdisk']) {
+    /* start each volume */
+    foreach ($freenas_config['gstripe']['vdisk'] as $a_raid_conf) {
+      mwexec("/sbin/gstripe stop {$a_raid_conf['name']}");
+    }    
+  }
+
+  return 0;
+}
+
+/* Stop all geom raid5 volumes */
+function disks_raid_graid5_stop() {
+  global $freenas_config, $g;
+
+  /* Generate the raid.conf file */
+  if ($freenas_config['graid5']['vdisk']) {
+    /* start each volume */
+    foreach ($freenas_config['graid5']['vdisk'] as $a_raid_conf) {
+      mwexec("/sbin/graid5 stop {$a_raid_conf['name']}");
+    }   
+  }
+
+  return 0;
+}
+
+
+/* Delete geom gvinum volume given in parameter */
+function disks_raid_gvinum_delete($raidname) {
+  global $freenas_config, $g;
+
+  exec("/sbin/gvinum lv $raidname",$rawdata);
+  
+  if (strpos($rawdata[0],"State: up") === false) {
+    return 0;
+  }
+
+  mwexec("/sbin/gvinum rm -r $raidname");
+
+  foreach ($freenas_config['gvinum']['vdisk'] as $a_raid) {
+    if ($a_raid['name'] == $raidname) {
+      foreach ($a_raid['diskr'] as $disk) {
+        mwexec("/sbin/gvinum rm -r disk_{$disk}");
+      }
+    }
+  }
+
+  return 0;
+}
+
+/* Delete geom mirror volume given in parameter */
+function disks_raid_gmirror_delete($raidname) {
+  global $freenas_config, $g;
+
+  // Stop the volume
+  mwexec("/sbin/gmirror stop $raidname");
+
+  // Clear the gmirror information on the hard drive
+  foreach ($freenas_config['gmirror']['vdisk'] as $a_raid) {
+    if ($a_raid['name'] == $raidname) {
+      foreach ($a_raid['diskr'] as $disk) {
+        mwexec("/sbin/gmirror clear {$disk}");
+      }
+    }
+  }
+
+  return 0;
+}
+
+/* Delete geom concat volume given in parameter */
+function disks_raid_gconcat_delete($raidname) {
+  global $freenas_config, $g;
+
+  // Stop the volume
+  mwexec("/sbin/gconcat stop $raidname");
+
+  // Clear the gconcat information on the hard drive
+  foreach ($freenas_config['gconcat']['vdisk'] as $a_raid) {
+    if ($a_raid['name'] == $raidname) {
+      foreach ($a_raid['diskr'] as $disk) {
+        mwexec("/sbin/gconcat clear {$disk}");
+      }
+      
+      mwexec("/sbin/gconcat destroy $raidname");
+    }
+  }
+
+  return 0;
+}
+
+/* Delete geom stripe volume given in parameter */
+function disks_raid_gstripe_delete($raidname) {
+  global $freenas_config, $g;
+
+  // Stop the volume
+  mwexec("/sbin/gstripe stop $raidname");
+
+  // Clear the gconcat information on the hard drive
+  foreach ($freenas_config['gstripe']['vdisk'] as $a_raid) {
+    if ($a_raid['name'] == $raidname) {
+      foreach ($a_raid['diskr'] as $disk) {
+        mwexec("/sbin/gstripe clear {$disk}");
+      }
+      
+      mwexec("/sbin/gstripe destroy $raidname");
+    }
+  }
+
+  return 0;
+}
+
+/* Delete geom raid5 volume given in parameter */
+function disks_raid_graid5_delete($raidname) {
+  global $freenas_config, $g;
+
+  // Stop the volume
+  mwexec("/sbin/graid5 stop $raidname");
+  
+  // The volume can disapear a few second after stop
+  sleep(2);
+
+  // Clear the graid5 information on the hard drive
+  foreach ($freenas_config['graid5']['vdisk'] as $a_raid) {
+    if ($a_raid['name'] == $raidname) {
+      foreach ($a_raid['diskr'] as $disk) {
+        mwexec("/sbin/graid5 remove $raidname {$disk}");
+      }
+    
+      mwexec("/sbin/graid5 destroy $raidname");
+    }
+  }
+
+  return 0;
+}
+
+/* Initialise HARD DRIVE for installing FreeNAS (creating 2 partition) */
+function fdisk_hd_install($harddrive) {
+  global $freenas_config, $g;
+
+  /* Initialise HARD DRIVE for installing FreeNAS (creating 2 partition) */
+
+  /* getting disk information */
+  $fdisk_info=fdisk_get_info($harddrive);
+
+  /* setting FreeNAS partition size to 32Mb */
+
+  $part_freenas_size=32;
+
+  /* convert Mb to b */
+  $part_freenas_size=$part_freenas_size * 1024 * 1024;
+
+  $part1_size=$part_freenas_size / $fdisk_info['sec_size'];
+  $part2_size=$fdisk_info['total'] - $part1_size;
+
+  /* Create fdisk config file */
+
+  /* generate fdisk.conf */
+  $fd = fopen("{$g['varetc_path']}/fdisk.conf", "w");
+  if (!$fd) {
+    printf("Error: cannot open fdisk.conf in fdisk_hd_install().\n");
+    return 1;
+  }
+        
+$fdiskconf .= <<<EOD
+g c{$fdisk_info['cyl']} h{$fdisk_info['head']} s{$fdisk_info['sect']}
+p 1 165 1 $part1_size
+p 2 165 $part1_size $part2_size
+p 3 0 0 0
+p 4 0 0 0
+a 1
+
+EOD;
+
+  fwrite($fd, $fdiskconf);
+  fclose($fd);
+
+  /* Fdisk the disk */
+
+  /* Warning: Ask two questions to the user */
+  mwexec("/sbin/fdisk -f {$g['varetc_path']}/fdisk.conf /dev/$harddrive");
+
+  return 0;
+}
+
+function fdisk_get_info($harddrive) {
+  /* Return information about an harddrive
+
+  $result['total'] : size
+  $result['cyl'] : cylinders
+  $result['head'] : heads
+  $result['sect'] :  sectors/track
+  $result['sec_size'] : Media sector size
+
+  */
+
+  global $freenas_config, $g;
+
+  exec("/sbin/fdisk /dev/$harddrive",$rawdata);
+
+  $result=array();
+
+  foreach ($rawdata as $line) {
+    /* separe the line by space or egal*/
+    $aline= preg_split("/[\s,]+|=/", $line);
+    $first_word = chop($aline[0]);
+        
+    if ($aline[0] == "Media") {
+      $result['sec_size']=chop($aline[4]);
+      continue ;
+    }
+        
+    if ($aline[0] == "cylinders") {
+      $result['cyl']=chop($aline[1]);
+      $result['head']=chop($aline[3]);
+      $result['sect']=chop($aline[5]);
+      continue ;
+    }
+  }
+
+  $result['total'] = $result['cyl'] * $result['head'] * $result['sect'] ;
+
+  return $result;
+}
+
+/* Is this function still used ??? */
+function disks_bsdlabel($harddrive,$partition,$type) {
+  global $freenas_config, $g;
+
+  // Generating BSD Label table
+  passthru("/sbin/bsdlabel " . escapeshellarg($harddrive) ."$partition > {$g['tmp_path']}/label.tmp");
+
+  // put this file on a array
+  $tableau = file("{$g['tmp_path']}/label.tmp");
+
+  // Open this file in add mode 
+  $handle = fopen("{$g['tmp_path']}/label.tmp", 'a');
+
+  while(list(,$val) = each($tableau)) {
+    // If the line contain the word "unused"
+    if (ereg ("unused",$val)) {
+      // Replacing c: by a:
+      // Why ??? Must found the web page where I see this method
+      $val = ereg_replace ("c:","a:", $val);
+      // Peplacing unused by $type
+      $val = ereg_replace ("unused",$type, $val);
+      // Adding this line add the end of the file
+      fwrite($handle, $val);
+    }
+  }
+  
+  // Closing file
+  fclose($handle);
+
+  // Injecting this new partition table 
+  passthru("/sbin/bsdlabel -R -B " . escapeshellarg($harddrive) ."$partition {$g['tmp_path']}/label.tmp");
+}
+
+
+function disks_set_ataidle() {
+  global $g, $freenas_config;
+
+  if (is_array($freenas_config['disks']['disk'])) {
+    foreach ($freenas_config['disks']['disk'] as $disk) {        
+      if ($disk['type']=="IDE") {
+        /* If UDMA mode forced, launch atacontrol */
+        if (isset($disk['udma']) && ($disk['udma'] != "auto")) {
+          mwexec("/sbin/atacontrol mode {$disk['name']}  {$disk['udma']}");
+        }
+                        
+        /* Don't use ataidle if all is disabled */
+        if (($disk['harddiskstandby'] == 0) && ($disk['apm'] == 0) && ($disk['acoustic'] == 0)) { continue; }
+                                
+        /* Found the channel and device number from the /dev name */
+        /* Divise the number by 2, the interger is the channel number, the rest is the device */
+                
+        $value=trim($disk['name'],'ad');
+                        
+        $value=intval($value);
+        $channel = $value/2;
+        $device=$value % 2;
+        $channel=intval($channel);
+        $time=$disk['harddiskstandby'];
+        $apm=$disk['apm'];
+        $ac=$disk['acoustic'];
+        
+        $cmd = "/usr/local/sbin/ataidle ";
+        
+        if ($disk['acoustic'] != 0) { $cmd .= "-A $ac  "; }
+        if ($disk['apm'] != 0) { $cmd .= "-P $apm "; }
+        if ($disk['harddiskstandby'] !=0) { $cmd .= "-S $time "; }
+        
+        $cmd .= "$channel $device";                
+        mwexec($cmd);        
+      } // end if
+    } // end foreach
+    
+    return 1;
+  } // end if
+                
+  return 0;
+}
+
+/* Is this function still used ???
+Get list of partition information from disk.
+Result is in the form:
+[1] => Array
+(
+  [start] => 31
+  [size]  => 409169
+  [type]  => 0xa5
+  [flags] => 0x80
+)
+
+Called in disks_manage_tools.php
+*/
+function disks_get_partition_info($disk) {  
+  exec("/sbin/fdisk -s {$disk}", $rawdata);
+  array_shift($rawdata);
+  array_shift($rawdata);
+
+  $result = array();
+
+  foreach($rawdata as $partinfo) {
+    $apartinfo = preg_split("/\s+/", $partinfo);
+    $partid = chop($apartinfo[1],":");
+
+    $result[$partid] = array();
+    $result[$partid]['start'] = chop($apartinfo[2]);
+    $result[$partid]['size']  = chop($apartinfo[3]);
+    $result[$partid]['type']  = chop($apartinfo[4]);
+    $result[$partid]['flags'] = chop($apartinfo[5]);
+  }
+
+  return $result;
+}
+
+?>
diff --git a/config/archive/freenas/pkg/freenas_functions.inc b/config/archive/freenas/pkg/freenas_functions.inc
new file mode 100644
index 00000000..fcea4478
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_functions.inc
@@ -0,0 +1,49 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas_functions.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+/* include all configuration functions */
+require_once ("freenas_disks.inc");
+require_once ("freenas_utils.inc");
+require_once ("freenas_services.inc");
+require_once ("freenas_system.inc");
+
+?>
\ No newline at end of file
diff --git a/config/archive/freenas/pkg/freenas_guiconfig.inc b/config/archive/freenas/pkg/freenas_guiconfig.inc
new file mode 100644
index 00000000..2dec5a42
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_guiconfig.inc
@@ -0,0 +1,288 @@
+<?php
+/*
+	guiconfig.inc
+	part of m0n0wall (http://m0n0.ch/wall)
+	
+	Copyright (C) 2003-2005 Manuel Kasper <mk@neon1.net>.
+	All rights reserved.
+
+	Modified for FreeNAS (http://freenas.org) by Olivier Cochard <cochard@gmail.com>
+
+	Redistribution and use in source and binary forms, with or without
+	modification, are permitted provided that the following conditions are met:
+	
+	1. Redistributions of source code must retain the above copyright notice,
+	   this list of conditions and the following disclaimer.
+	
+	2. Redistributions in binary form must reproduce the above copyright
+	   notice, this list of conditions and the following disclaimer in the
+	   documentation and/or other materials provided with the distribution.
+	
+	THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+	INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+	AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+	AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+	OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+	SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+	INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+	CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+	ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+	POSSIBILITY OF SUCH DAMAGE.
+*/
+
+$d_mountdirty_path = $g['varrun_path'] . "/mount.dirty";
+$d_diskdirty_path = $g['varrun_path'] . "/disk.dirty";
+$d_raidconfdirty_path = $g['varrun_path'] . "/raid.conf.dirty";
+$d_userconfdirty_path = $g['varrun_path'] . "/user.conf.dirty";
+$d_groupconfdirty_path = $g['varrun_path'] . "/group.conf.dirty";
+$d_smbshareconfdirty_path = $g['varrun_path'] . "/smbshare.conf.dirty";
+$d_nfsexportconfdirty_path = $g['varrun_path'] . "/nfsexport.conf.dirty";
+$d_upnpconfdirty_path = $g['varrun_path'] . "/upnp.conf.dirty";
+
+/* ============================================================================= */
+/* ==    Constants used together with executing a UNIX command line tool      == */
+/* ============================================================================= */
+
+define("DONE_PARAGRAPH", "
+              <p>
+                <span class='red' style='font-family: Courier, monospace; font-size: small;'><strong>Done!</strong></span>
+              </p>
+       ");
+
+define("CMDOUT_PARA", "
+              <p style='font-size: small;'>
+                <strong>Command output</strong> (use the toggle icon to unveil detailed infos):
+              </p>
+       ");
+
+define("CMDOUT_PARA_WOHINT", "
+              <p style='font-size: small;'>
+                <strong>Command output:</strong>
+              </p>
+       ");
+
+define("CMDOUT_TOGGLE_FUNC", "
+function toggle_cmdout(image, totoggle) {
+  var plusSrc = \"/themes/{$g['theme']}/images/misc/bullet_toggle_plus.png\";
+  var minusSrc = \"/themes/{$g['theme']}/images/misc/bullet_toggle_minus.png\";
+  var currentSrc = image.src;
+  var newSrc = (currentSrc.indexOf(\"plus\") >= 0) ? minusSrc : plusSrc;
+
+  image.src = newSrc;
+  Effect.toggle(totoggle, 'appear', { duration: 0.75 });
+}
+");
+
+define("CMDOUT_AJAX_SCRIPT", "
+          <script type='text/javascript'>
+            function execCMD() {
+              var to_insert = \"<div style='visibility:hidden' id='loading' name='loading'><img src='/themes/nervecenter/images/misc/loader_tab.gif' \/><\/div>\";
+              new Insertion.Before('doCMDSubmit', to_insert);
+              
+              $('doCMDSubmit').style.visibility = 'hidden';
+              $('loading').style.visibility = 'visible';
+              $('cmdOutputTD').innerHTML = '';
+          
+              new Ajax.Request(
+                \"{$_SERVER['SCRIPT_NAME']}\", {
+                  method     : 'post',
+                  parameters : Form.serialize($('iform')),
+                  onSuccess  : execCMDComplete,
+                  onFailure  : execCMDFailure
+                }
+              );
+            }
+          
+            function execCMDFailure(req) {
+              if($('doCMDSubmit')) $('doCMDSubmit').style.visibility = 'visible';
+              if($('loading')) $('loading').style.visibility = 'hidden';
+              if($('inputerrors')) window.scrollTo(0, 0);
+              if($('inputerrors')) new Effect.Shake($('inputerrors'));
+              if($('inputerrors')) $('inputerrors').innerHTML = req.responseText;
+            }
+
+            function execCMDComplete(req) {
+              $('cmdOutputTD').innerHTML = req.responseText;
+              $('loading').style.visibility = 'hidden';
+              $('doCMDSubmit').style.visibility = 'visible';
+              $('cmdOutputTD').style.visibility = 'visible';
+            }
+          </script>
+");
+
+$freenas_config =& $config['installedpackages']['freenas']['config'][0];
+
+/* ============================================================================= */
+/* ==     Functions used together with executing a UNIX command line tool     == */
+/* ============================================================================= */
+
+function assemble_cmdout($button, $out, $done = false) {
+  $dopara = DONE_PARAGRAPH;
+
+  $retvalue =<<<EOD
+{$button}
+{$out}
+
+EOD;
+
+  if ($done) { $retvalue .= "{$dopara}\n"; }
+  return $retvalue;
+}
+
+function create_cmdout_container($id = "", $cmd = "") {
+  $diskinit_str = "";
+  
+  if (is_array($cmd)) {
+    foreach ($cmd as $cmdline) {
+      $a_out = exec_command_and_return_text_array($cmdline);
+      $diskinit_str .= implode("\n", $a_out);
+    }
+  } else {
+    $a_out = exec_command_and_return_text_array($cmd);
+    $diskinit_str = implode("\n", $a_out);
+  }
+  
+  $returnval =<<<EOD
+              <div id="{$id}" style="display: none; font-family: Courier, monospace; font-size: small;">
+              <pre style="font-family: Courier, monospace; font-size: small; font-style: italic;">{$diskinit_str}</pre>
+              </div>
+
+EOD;
+
+  return $returnval;
+}
+
+function create_toggle_button($title, $totoggle) {
+  global $g;
+  
+  $returnval =<<<EOD
+                <table cellpadding="0" cellspacing="0" border="0" style="padding-bottom: 8px;">
+                  <tr>
+                    <td align="left" valign="middle" style="padding-right: 5px;">
+                      <img src='/themes/{$g['theme']}/images/misc/bullet_toggle_plus.png' alt='' border='0' style='border: solid 1px silver; cursor: pointer;' onclick='toggle_cmdout(this, "{$totoggle}");' />
+                    </td>
+                    <td align="left" valign="middle" style='font-family: Courier, monospace; font-size: small;'>
+                      {$title}:
+                    </td>
+                  </tr>
+                </table>
+EOD;
+
+  return $returnval;
+}
+
+function print_error_box_np($msg) {
+  global $g;
+
+  echo "<table border=\"0\" cellspacing=\"0\" cellpadding=\"4\" width=\"100%\">\n";
+  echo "<tr><td bgcolor=\"#A12A2A\" width=\"36\" align=\"center\" valign=\"top\"><img src=\"/themes/{$g['theme']}/images/icons/icon_error.gif\" width=\"28\" height=\"32\"></td>\n";
+  echo "<td bgcolor=\"#FFD9D1\" style=\"padding-left: 8px; padding-top: 6px\">";
+  echo "<span class=\"errmsg\">";
+  echo $msg;
+  echo "</span>";
+  echo "</td></tr></table>";
+}
+
+function print_error_box($msg) {
+  echo "<p>";
+  print_error_box_np($msg);
+  echo "</p>";
+}
+
+function mount_sort() {
+	global $g, $freenas_config;
+
+	function mountcmp($a, $b) {
+		return strcmp($a['mdisk'], $b['mdisk']);
+	}
+
+	usort($freenas_config['mounts']['mount'], "mountcmp");
+}
+
+function disks_sort() {
+	global $g, $freenas_config;
+
+	function diskcmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($freenas_config['disks']['disk'], "diskcmp");
+}
+
+function gvinum_sort() {
+	global $g, $freenas_config;
+
+	function gvinumcmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($freenas_config['gvinum']['vdisk'], "gvinumcmp");
+	
+}
+
+function gmirror_sort() {
+	global $g, $freenas_config;
+
+	function gmirrorcmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($freenas_config['gmirror']['vdisk'], "gmirrorcmp");
+	
+}
+
+function gconcat_sort() {
+	global $g, $freenas_config;
+
+	function gconcatcmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($freenas_config['gconcat']['vdisk'], "gconcatcmp");
+	
+}
+
+function gstripe_sort() {
+	global $g, $freenas_config;
+
+	function gstripecmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($freenas_config['gstripe']['vdisk'], "gstripecmp");
+	
+}
+
+function graid5_sort() {
+	global $g, $freenas_config;
+
+	function graid5cmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($freenas_config['graid5']['vdisk'], "graid5cmp");
+	
+}
+
+/* TODO: This needs to be changed */
+function users_sort() {
+	global $g, $config;
+
+	function userscmp($a, $b) {
+		return strcmp($a['login'], $b['login']);
+	}
+
+	usort($config['system']['user'], "userscmp");
+}
+
+/* TODO: This needs to be changed */
+function groups_sort() {
+	global $g, $config;
+
+	function groupscmp($a, $b) {
+		return strcmp($a['name'], $b['name']);
+	}
+
+	usort($config['system']['group'], "groupscmp");
+}
+?>
\ No newline at end of file
diff --git a/config/archive/freenas/pkg/freenas_services.inc b/config/archive/freenas/pkg/freenas_services.inc
new file mode 100644
index 00000000..71401211
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_services.inc
@@ -0,0 +1,2025 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas_services.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+define ("FTP_BACKEND_PAM", "pam");
+define ("FTP_BACKEND_PLAINTEXT", "plaintext");
+define ("NFS_SERVICE_PORTS", "111 2049 4711");
+
+$freenas_config =& $config['installedpackages']['freenas']['config'][0];
+
+/* Stop samba, Generate the samba configuration 
+ * file and start samba Return 0 if OK, 1 or 
+ * error code if error
+ */
+function services_samba_configure() {
+  global $freenas_config, $g;
+
+  /* kill any running samba */
+  killbyname("smbd");
+  killbyname("winbindd");
+  killbyname("nmbd");
+
+  if (isset($freenas_config['samba']['enable'])) {
+    if ($g['booting']) { echo "Starting Samba... "; }
+
+    /* make sure any of the required dirs exist */
+    if (! file_exists("{$g['varetc_path']}/private")) {
+      mkdir("{$g['varetc_path']}/private");
+    }
+    if (! file_exists("{$g['varlog_path']}/samba")) {
+      mkdir("{$g['varlog_path']}/samba");
+    }
+
+    /* generate smb.conf */
+    $fd = fopen("{$g['varetc_path']}/smb.conf", "w");
+  
+    if (!$fd) {
+      printf("Error: cannot open smb.conf in services_samba_configure().\n");
+      return 1;
+    }
+
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { return 0; }
+
+    $gen_date = date("F j, Y, g:i a");
+    $sambaconf = <<<EOD
+#
+# smb.conf generated by pfSense
+# Generated at: {$gen_date}
+#
+[global]
+encrypt passwords = yes
+netbios name = {$freenas_config['samba']['netbiosname']}
+workgroup = {$freenas_config['samba']['workgroup']}
+server string = {$freenas_config['samba']['serverdesc']}
+load printers = no
+security = {$freenas_config['samba']['security']}
+dns proxy = no
+socket options = IPTOS_LOWDELAY TCP_NODELAY
+EOD;
+
+    if ($freenas_config['samba']['sndbuf']) {
+      /* below is a continuation of socket options! */
+      $sambaconf .= <<<EOD
+ SO_SNDBUF={$freenas_config['samba']['sndbuf']}
+EOD;
+    } else {
+      /* below is a continuation of socket options! */
+      $sambaconf .= <<<EOD
+ SO_SNDBUF=16384
+EOD;
+    } // end if
+
+    if ($freenas_config['samba']['rcvbuf']) {
+      /* below is a continuation of socket options! */
+      $sambaconf .= <<<EOD
+ SO_RCVBUF={$freenas_config['samba']['rcvbuf']}
+EOD;
+    } else {
+      /* below is a continuation of socket options! */
+      $sambaconf .= <<<EOD
+ SO_RCVBUF=16384
+EOD;
+    } // end if
+
+    if ($freenas_config['samba']['winssrv']) {
+      $sambaconf .= <<<EOD
+
+wins server = {$freenas_config['samba']['winssrv']}
+
+EOD;
+    }
+
+    if (isset ($freenas_config['samba']['unixcharset'])) {
+      $sambaconf .= <<<EOD
+
+unix charset = {$freenas_config['samba']['unixcharset']}
+
+EOD;
+    } else {
+      $sambaconf .= <<<EOD
+
+unix charset = UTF-8
+
+EOD;
+
+    } // end if
+
+    $sambaconf .= <<<EOD
+
+local master = {$freenas_config['samba']['localmaster']}
+time server = {$freenas_config['samba']['timesrv']}
+guest account = ftp
+display charset = UTF-8
+max log size = 10
+syslog only = yes
+syslog = {$config['samba']['loglevel']}
+load printers = no
+printing = bsd
+printcap name = /dev/null
+disable spoolss = yes
+#Test: Try to improve samba performance under FreeBSD:
+use sendfile = yes
+strict locking = no
+#End of performance section
+log level = {$freenas_config['samba']['loglevel']}
+dos charset = {$freenas_config['samba']['doscharset']}
+smb passwd file = {$g['varetc_path']}/private/smbpasswd
+private dir = {$g['varetc_path']}/private
+
+EOD;
+
+    switch ($freenas_config['samba']['security']) {
+      case "share":
+        $sambaconf .= <<<EOD
+create mask = 0666
+directory mask = 0777
+passdb backend = smbpasswd
+
+EOD;
+
+        $guestmode = <<<EOD
+guest ok = yes
+
+EOD;
+
+        break; // end case "share"
+      case "domain":
+        $sambaconf .= <<<EOD
+passdb backend = smbpasswd
+allow trusted domains = No
+dns proxy = No
+ldap ssl = no
+idmap backend = rid:{$freenas_config['samba']['workgroup']}=10000-20000
+idmap uid = 10000-20000
+idmap gid = 10000-20000
+winbind enum groups = yes
+winbind enum users = yes
+winbind use default domain = Yes
+template homedir = /mnt
+template shell = /bin/sh
+
+EOD;
+
+        $guestmode = <<<EOD
+guest ok = no
+
+EOD;
+        break; // end case "domain":
+      case "user":
+        $sambaconf .= <<<EOD
+passdb backend = smbpasswd
+
+EOD;
+
+        $guestmode = <<<EOD
+guest ok = no
+
+EOD;
+
+        break; // end case "user":
+    } // end switch
+
+    foreach ($freenas_config['mounts']['mount'] as $mountent) {
+      /* Unmount filesystem if not booting mode*/
+      $sambaconf .= <<<EOD
+
+[{$mountent['sharename']}]
+comment = {$mountent['desc']}
+path = /mnt/{$mountent['sharename']}
+public = yes
+writeable = yes
+printable = no
+veto files = /Network Trash Folder/Icon?/:2e*/.AppleDesktop/.AppleDB/.AppleDouble/TheFindByContentFolder/TheVolumeSettingsFolder/Temporary Items/.snap/
+hide dot files = yes
+{$guestmode}
+
+EOD;
+
+      if ( (is_array($freenas_config['samba']['hidemount']) && in_array($mountent['sharename'],$freenas_config['samba']['hidemount']))) {
+        $sambaconf .= <<<EOD
+browseable = no
+
+EOD;
+
+      } // end if
+
+      if (isset($freenas_config['samba']['recyclebin'])) {
+        $sambaconf .= <<<EOD
+vfs object = recycle
+recycle:repository = Recycle Bin
+recycle:keeptree = Yes
+recycle:versions = Yes
+
+EOD;
+      } // end if
+    } // end foreach
+
+    fwrite($fd, $sambaconf);
+    fclose($fd);
+
+    /* run nmbd and nmbd */
+    if (isset($freenas_config['ad']['enable'])) {
+      mwexec("/usr/local/bin/net rpc join -S {$freenas_config['ad']['ad_srv_name']} -U {$freenas_config['ad']['admin_name']}%{$freenas_config['ad']['admin_pass']}");
+    }
+
+    $result |= mwexec("/usr/local/sbin/nmbd -D -s {$g['varetc_path']}/smb.conf");
+
+    if (isset($freenas_config['ad']['enable'])) {
+      mwexec("/usr/local/sbin/winbindd -s {$g['varetc_path']}/smb.conf");
+      //mwexec("/usr/local/sbin/wbinfo --set-auth-user {$freenas_config['ad']['admin_name']}%{$freenas_config['ad']['admin_pass']}");
+    }
+
+    $result |= mwexec("/usr/local/sbin/smbd -D -s {$g['varetc_path']}/smb.conf");
+
+    /* TEST: Wait for samba starting */
+    sleep(2);
+
+    /* Generate the samba password file */
+    $result |= system_user_samba();
+
+    if ($g['booting']) { echo "done\n"; }
+ }// end if
+ 
+ return $result;
+}
+
+/* Stop rsync, Generate the rsync configuration file and start
+ * rsync Return 0 if OK, 1 or error code if error
+ */
+function services_rsyncd_configure() {
+  global $freenas_config, $g;
+
+  /* kill any running rsync daemon */
+  sigkillbypid("{$g['varrun_path']}/rsyncd.pid", "TERM");
+
+  if (isset($freenas_config['rsyncd']['enable'])) {
+    if ($g['booting']) { echo "Starting RSYNC daemon... "; }
+
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { return 1; }
+
+    /* generate rsyncd.conf */
+    $fd = fopen("{$g['varetc_path']}/rsyncd.conf", "w");
+
+    if (!$fd) {
+      printf("Error: cannot open rsyncd.conf in services_rsyncd_configure().\n");
+      return 1;
+    }
+
+    $rsyncdconf = <<<EOD
+read only = {$freenas_config['rsyncd']['readonly']}
+syslog facility = local4
+list = yes
+port = {$freenas_config['rsyncd']['port']}
+pid file = {$g['varrun_path']}/rsyncd.pid
+
+EOD;
+
+    if (!empty($freenas_config['rsyncd']['maxcon'])) {
+      $rsyncdconf .= <<<EOD
+max connections = {$freenas_config['rsyncd']['maxcon']}
+
+EOD;
+    }
+
+    if (!empty($freenas_config['rsyncd']['motd'])) {
+      $rsyncdconf .= <<<EOD
+motd file = {$g['varetc_path']}/rsyncd.motd
+
+EOD;
+    }
+
+    if (isset($freenas_config['rsyncd']['rsyncd_user'])) {
+      $rsyncdconf .= <<<EOD
+uid = {$freenas_config['rsyncd']['rsyncd_user']}
+
+EOD;
+
+    } else {
+      $rsyncdconf .= <<<EOD
+uid = ftp
+gid = ftp
+
+EOD;
+    } // end if
+
+    foreach ($freenas_config['mounts']['mount'] as $mountent) {
+      /* Unmount filesystem if not booting mode*/
+      $rsyncdconf .= <<<EOD
+
+[{$mountent['sharename']}]
+comment = {$mountent['desc']}
+path = /mnt/{$mountent['sharename']}
+
+EOD;
+    } // end foreach
+
+    fwrite($fd, $rsyncdconf);
+    fclose($fd);
+
+    // Generate MOTD file if configured
+    if (!empty($freenas_config['rsyncd']['motd'])) {
+      $fd = fopen("{$g['varetc_path']}/rsyncd.motd", "w");
+
+      if (!$fd) {
+        printf("Error: cannot open rsyncd.motd in services_rsyncd_configure().\n");
+        return 1;
+      }
+
+      $motd  = <<<EOD
+{$freenas_config['rsyncd']['motd']}
+
+EOD;
+
+      fwrite($fd, $motd);
+      fclose($fd);
+    } // end if
+
+    /* run rsync Daemon */
+    $result = mwexec("/usr/local/bin/rsync --daemon --config={$g['varetc_path']}/rsyncd.conf");
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  return $result;
+}
+
+/* Stop nfs processes, Generate the nfs configuration file and
+ * start nfsd processes Return 0 if OK, 1 or error code if error
+ */
+function services_nfs_configure() {
+  global $freenas_config, $g;
+
+  /* kill any running nfsd */
+  killbyname("rpc.statd");
+  killbyname("rpc.lockd");
+  killbypid("{$g['varrun_path']}/mountd.pid");
+  forcekillbyname("nfsd");
+  killbyname("rpcbind");
+
+  if (isset($freenas_config['nfs']['enable'])) {
+    if ($g['booting']) { echo "Starting NFS... "; }
+    
+    $nfsconf = "";
+    $a_nfsconf = array();
+
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { return 1; }
+
+    /* generate exports */
+    $fd = fopen("{$g['varetc_path']}/exports", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open exports in services_nfs_configure().\n");
+      return 1;
+    }
+
+    $a_mount = &$freenas_config['mounts']['mount'];
+    $pfnetworks = array();
+    
+    foreach ($a_mount as $mount) {
+      /* -mapall and -maproot mutually exclusive */
+      $mapping = $mount['nfs']['mapall'] == "yes" ? "-mapall=root" : "-maproot=root";
+      $networks = isset($mount['nfs']['networks']) ? $mount['nfs']['networks'] : "";
+      
+      $nfsconf = "/mnt/{$mount['sharename']} -alldirs {$mapping}";
+      
+      if ($networks <> "") {
+        foreach (explode(",", $networks) as $netel) {
+          list($network,$subnet) = 
+          explode('/', $netel);
+      
+          $subnet = gen_subnet_mask($subnet);
+          $pfnetworks[] = $network;
+          
+          $tmp_nfsconf .= "{$nfsconf} -network {$network} -mask {$subnet}\n";
+        }
+        
+        services_setup_transparency_for("nfs", implode(" ", $pfnetworks));
+        $nfsconf = $tmp_nfsconf;
+      } else {
+        $nfsconf .= "\n";
+      }
+    }
+
+    fwrite($fd, $nfsconf);
+    fclose($fd);
+
+    $nfsdbindto = $freenas_config['nfs']['bindto'] = "(ANY)" ? " -a" : " -h {$freenas_config['nfs']['bindto']}";
+    $rpcbbindto = $freenas_config['nfs']['bindto'] = "(ANY)" ? "" : " -h {$freenas_config['nfs']['bindto']}";
+    $servetcp = isset($freenas_config['nfs']['servetcp']) ? " -t" : "";
+    $serveudp = isset($freenas_config['nfs']['serveudp']) ? " -u" : "";
+
+    /* run rpcbind, nfsd and mountd */
+    mwexec("/usr/sbin/rpcbind{$rpcbbindto}");
+    mwexec("/usr/sbin/nfsd{$nfsdbindto}{$serveudp}{$servetcp} -n 4");
+    mwexec("/usr/sbin/mountd -p 4711 -r {$g['varetc_path']}/exports");
+    mwexec("/usr/sbin/rpc.lockd");
+    mwexec("/usr/sbin/rpc.statd");
+
+    if ($g['booting']) { echo "done\n"; }
+  } else {
+    services_remove_transparency_for("nfs");
+  }// end if
+
+  return 0;
+}
+
+function services_remove_transparency_for($whom) {
+  global $g;
+  
+  $service_result = mwexec ("pfctl -a \"passin-package-freenas-{$whom}\" -F rules");
+  if($service_result <> 0) {
+    file_notice("FREENAS", "There were error(s) flushing the exclude table", "FREENAS", "");
+  }
+  
+  unlink_if_exists("{$g['pkg_path']}/pf/freenas-{$whom}.sh");
+}
+
+function services_setup_transparency_for($whom, $networks) {
+  global $g, $config, $freenas_config;
+  
+  if ($whom == "" || $networks == "") { return; }
+  
+  $generatedLANSubnet = gen_subnet($config['interfaces']['lan']['ipaddr'],
+                                   $config['interfaces']['lan']['subnet']);
+  $aliases = "";
+  
+  /* stolen from filter.inc */
+  $real_wanif = get_real_wan_interface();
+  $wanip = find_interface_ip($real_wanif);
+  
+  $wan_aliases = " " . link_ip_to_carp_interface($wanip);
+  
+  if (link_int_to_bridge_interface("wan"))
+    $wan_aliases .= " " . link_int_to_bridge_interface("wan");
+  
+  if ($config['interfaces']['wan']['ipaddr'] == "pppoe" or $config['interfaces']['wan']['ipaddr'] == "pptp") {
+    $aliases .= "ng0 = \"{ {$config['interfaces']['wan']['if']} {$real_wanif} }\" \n";
+    $aliases .= "wan = \"{ {$config['interfaces']['wan']['if']} {$wan_aliases} ng0 }\"\n";
+  } else {
+    $aliases .= "wan = \"{ {$real_wanif} {$wan_aliases} }\"\n";
+  }
+  
+  $trans_file = fopen("/tmp/freenas-{$whom}.rules","w");
+  fwrite($trans_file, "{$aliases}\n");
+  
+  switch ($whom) {
+    case "nfs":
+      $nfs_ports = explode(" ", NFS_SERVICE_PORTS);
+      
+      foreach ($nfs_ports as $port) {
+        fwrite($trans_file, "pass in quick on \$wan proto { tcp udp } from { {$networks} } to {$freenas_config['nfs']['bindto']} port = {$port} keep state  label \"FreeNAS related rule for {$whom}-{$port}\"\n");
+      }
+      break;
+  }
+  fclose($trans_file);
+  $service_result = mwexec ("pfctl -a \"passin-package-freenas-{$whom}\" -f /tmp/freenas-{$whom}.rules");
+  if($service_result <> 0) {
+    file_notice("FREENAS", "There were error(s) loading the transparency rules", "FREENAS", "");
+  }
+  
+  /* create a shell script to make sure our filter rules
+   * are getting loaded upon each filter realod cycle.
+   */
+  $scriptstr = "#!/bin/sh\n\n";
+  $scriptstr .= "case $1 in\n";
+  $scriptstr .= "  start)\n";
+  $scriptstr .= "  if [ -f /tmp/freenas-nfs.rules ]; then\n";
+  $scriptstr .= "    /sbin/pfctl -a \"passin-package-freenas-{$whom}\" -f /tmp/freenas-{$whom}.rules\n";
+  $scriptstr .= "  fi\n";
+  $scriptstr .= "  ;;\n";
+  $scriptstr .= "  *)\n";
+  $scriptstr .= "  echo \"Usage: $0 (start|stop|restart|status|log)\"\n";
+  $scriptstr .= "  exit 1\n";
+  $scriptstr .= "esac\n";
+
+  file_put_contents("{$g['pkg_path']}/pf/freenas-{$whom}.sh", $scriptstr);
+  chmod("{$g['pkg_path']}/pf/freenas-{$whom}.sh", 0700);
+}
+
+function services_ftpd_configure() {
+  global $freenas_config, $g;
+  // services_vsftpd_configure();
+  // services_pureftpd_configure();
+  services_wzdftpd_configure();
+}
+
+function services_wzdftpd_configure() {
+  global $freenas_config, $config, $g;
+
+  /* kill any WZDFTPD */
+  killbyname("wzdftpd");
+
+  if (isset($freenas_config['ftp']['enable'])) {
+    if ($g['booting']) { echo "Starting FTP server... "; }
+
+    /* create missing dirs if necessary */
+    if (! file_exists("/var/log/wzdftpd")) { mkdir("/var/log/wzdftpd"); }
+    if (! file_exists("/usr/local/etc/wzdftpd")) { mkdir("/usr/local/etc/wzdftpd"); }
+
+    /* generate wzd.cfg */
+    chmod("/usr/local/etc/wzdftpd/wzd.cfg", 0600);
+    $fd = fopen("/usr/local/etc/wzdftpd/wzd.cfg", "w");
+
+    if (!$fd) {
+      printf("Error: cannot open vsftpd.conf in services_vsftpd_configure().\n");
+      return 1;
+    }
+
+    $ftpconf = <<<EOD
+[GLOBAL]
+config version = 0.7.2
+backup config = true
+port = {$freenas_config['ftp']['port']}
+
+EOD;
+
+    if ($freenas_config['ftp']['pasv_min_port'] && $freenas_config['ftp']['pasv_max_port']) {
+      $ftpconf .= <<<EOD
+pasv_low_range = {$freenas_config['ftp']['pasv_min_port']}
+pasv_high_range = {$freenas_config['ftp']['pasv_max_port']}
+
+EOD;
+  }
+
+    $ftpconf .= <<<EOD
+
+pasv_ip = {$freenas_config['ftp']['pasv_address']}
+dir_message = .message
+logfile = /var/log/wzdftpd/wzd.log
+xferlog = /var/log/wzdftpd/xferlog
+logdir = /var/log/wzdftpd
+max_threads = {$freenas_config['ftp']['numberclients']}
+
+backend = /usr/local/share/wzdftpd/backends/libwzd{$freenas_config['ftp']['authentication_backend']}.so
+
+max_ul_speed = 0
+max_dl_speed = 0
+deny_access_files_uploaded = 1
+
+tls_certificate = /usr/local/etc/wzdftpd/wzd.pem
+sitefile_ginfo  = /usr/local/etc/wzdftpd/file_ginfo.txt
+sitefile_group  = /usr/local/etc/wzdftpd/file_group.txt
+sitefile_user   = /usr/local/etc/wzdftpd/file_user.txt
+
+[pre_ip_check]
+localhost = allow
+
+[perms]
+site_addip = +O +G
+site_adduser = +O +G
+site_backend = +O
+site_chacl = +O
+site_change = +O +G
+site_changegrp = +O +G
+site_checkperm = +O
+site_chgrp = +O
+site_chmod = +O
+site_chown = +O
+site_chpass = *
+site_chratio = +O +G
+site_close = +O
+site_color = !=guest *
+site_delip = +O +G
+site_deluser = +O +G
+site_flags = -admin
+site_free = *
+site_ginfo = +O +G
+site_give = *
+site_group = +O
+site_groups = +O
+site_grpadd = +O
+site_grpaddip = +O
+site_grpchange = +O
+site_grpdel = +O
+site_grpdelip = +O
+site_grpkill = +O
+site_grpratio = +O
+site_grpren = +O
+site_gsinfo = +O +G
+site_help = *
+
+EOD;
+
+    if (! empty($freenas_config['ftp']['timeout'])) {
+      $ftpconf .= "site_idle ={$freenas_config['ftp']['timeout']}\n";
+    } else {
+      $ftpconf .= "site_idle = *\n";
+    }
+
+    $ftpconf .= <<<EOD
+site_invite = !=guest *
+site_kick = +O
+site_kill = +O
+site_link = +O
+site_msg = +O
+site_perm = +O
+site_purge = +O +G
+site_readd = +O +G
+site_reload = +O
+site_reopen = +O
+site_rules = *
+site_rusage = +O
+site_savecfg = +O
+site_sections = +O
+site_shutdown = +O
+site_su = +O
+site_swho = +O
+site_tagline = !=guest *
+site_take = +O
+site_unlock = +O
+site_uptime = *
+site_user = +O +G
+site_users = -admin
+site_utime = *
+site_vars = +O
+site_vars_group = +O
+site_vars_user = +O
+site_version = +O
+site_who = !=guest *
+site_wipe = +O
+site_vfsls = +O
+site_vfsadd = +O
+site_vfsdel = +O
+
+[modules]
+/usr/local/share/wzdftpd/modules/libwzd_debug.so = deny
+/usr/local/share/wzdftpd/modules/libwzd_test.so = deny
+/usr/local/share/wzdftpd/modules/libwzd_sfv.so = allow
+/usr/local/share/wzdftpd/modules/libwzd_tcl.so = deny
+/usr/local/share/wzdftpd/modules/libwzd_perl.so = deny
+
+EOD;
+
+    if (empty($config['system']['zeroconf_disable'])) {
+      $ftpconf .= <<<EOD
+/usr/local/share/wzdftpd/modules/libwzd_zeroconf.so = allow
+
+[ZEROCONF]
+zeroconf_port = {$freenas_config['ftp']['port']}
+zeroconf_username = wzdftpd
+zeroconf_password = wzdftpd
+zeroconf_path = /
+
+EOD;
+
+    }
+
+    $ftpconf .= <<<EOD
+
+[sfv]
+progressmeter = [WzD] - %3d%% Complete - [WzD]
+del_progressmeter = \[.*] - ...% Complete - \[WzD]
+incomplete_indicator = ../(incomplete)-%0
+other_completebar = [WzD] - ( %.0mM %fF - COMPLETE ) - [WzD]
+
+[plaintext]
+param = /usr/local/etc/wzdftpd/users
+
+[sections]
+ALL = /* ^([]\[A-Za-z0-9_.'() \\t+-])*\$
+
+[cron]
+
+[events]
+
+[custom_commands]
+site_rules = !/usr/local/etc/wzdftpd/file_rules.txt
+
+site_groups = !/usr/local/etc/wzdftpd/file_groups.txt
+site_help = !/usr/local/etc/wzdftpd/file_help.txt
+site_swho = !/usr/local/etc/wzdftpd/file_swho.txt
+site_users = !/usr/local/etc/wzdftpd/file_users.txt
+site_vfsls = !/usr/local/etc/wzdftpd/file_vfs.txt
+site_who = !/usr/local/etc/wzdftpd/file_who.txt
+
+[vfs]
+
+[messages]
+
+EOD;
+
+    if (isset($freenas_config['ftp']['banner'])) {
+      $ftpconf .= "200 = {$freenas_config['ftp']['banner']}";
+    } else {
+      $ftpconf .= "200 = Welcome to pfSense FTP service";
+    }
+
+    fwrite($fd, $ftpconf);
+    fclose($fd);
+    chmod("/usr/local/etc/wzdftpd/wzd.cfg", 0400);
+
+    /* now generate the plaintext users file (if applicable) */
+    if ($freenas_config['ftp']['authentication_backend'] == FTP_BACKEND_PLAINTEXT) {
+      $ftpusers = "[GROUPS]\n";
+      $a_group =& $config['system']['group'];
+      $a_user =& $config['system']['user'];
+
+      for ($i = 0; $i < count($a_group); $i++) {
+        $group = $a_group[$i];
+        $gid = $i + 1;
+
+        $ftpusers .= <<<EOD
+
+privgroup {$group['name']}
+gid={$gid}
+default_home=/
+
+EOD;
+      } // end foreach
+
+      /* anonymous group */
+      if (! empty($freenas_config['ftp']['anonymous'])) {
+        $ftpusers .= <<<EOD
+
+privgroup anonymous
+max_idle_time=10
+gid=3
+default_home=/home
+
+EOD;
+    }
+
+      /* same for users */
+      $ftpusers .= "[USERS]\n";
+      for ($i = 0; $i < count($a_user); $i++) {
+        $user = $a_user[$i];
+        $ftpusers .= <<<EOD
+
+name={$user['name']}
+pass={$user['password']}
+home=/
+uid={$i}
+groups={$user['groupname']}
+rights=0xffffffff
+
+EOD;
+      } // end foreach
+
+      /* anonymous user */
+      if (! empty($freenas_config['ftp']['anonymous'])) {
+        $ftpusers .= <<<EOD
+
+name=guest
+pass=%
+home=/tmp
+uid=200
+groups=anonymous
+rights=0x10003
+ip_allowed=*
+max_dl_speed=20480
+credits=0
+bytes_ul_total=0
+bytes_dl_total=1918812
+num_logins=2
+
+EOD;
+      } // end if
+
+      $ftpusers .= "[HOSTS]\nall = *\n";
+      chmod("/usr/local/etc/wzdftpd/users", 0600);
+      file_put_contents("/usr/local/etc/wzdftpd/users", $ftpusers);
+      chmod("/usr/local/etc/wzdftpd/users", 0400);
+    } // end if
+
+    /* run vsftpd */
+    mwexec("/usr/local/sbin/wzdftpd -f /usr/local/etc/wzdftpd/wzd.cfg");
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  return 0;
+}
+
+/* this function is currently not used */
+function services_vsftpd_configure() {
+  global $freenas_config, $g;
+
+  /* kill any VSFTPD */
+  killbyname("vsftpd");
+
+  if (isset($freenas_config['ftp']['enable'])) {
+    if ($g['booting']) { echo "Starting FTP server... "; }
+
+    /* generate vfstpd.conf */
+    $fd = fopen("{$g['varetc_path']}/vsftpd.conf", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open vsftpd.conf in services_vsftpd_configure().\n");
+      return 1;
+    }
+
+    $ftpconf = <<<EOD
+# Standalone mode
+listen=YES
+background=YES
+listen_port={$freenas_config['ftp']['port']}
+max_clients={$freenas_config['ftp']['numberclients']}
+max_per_ip={$freenas_config['ftp']['maxconperip']}
+xferlog_enable=YES
+#vsftpd_log_file=/var/log/ftp.log
+syslog_enable=YES
+# Access rights
+anonymous_enable={$freenas_config['ftp']['anonymous']}
+local_enable={$freenas_config['ftp']['localuser']}
+write_enable=YES
+hide_file=.snap
+anon_other_write_enable=YES
+anon_upload_enable=YES
+anon_mkdir_write_enable=YES
+chroot_local_user=YES
+local_umask=066
+anon_umask=066
+chmod_enable=YES
+pasv_address={$freenas_config['ftp']['pasv_address']}
+# Features
+ls_recurse_enable=YES
+# Performance
+idle_session_timeout={$freenas_config['ftp']['timeout']}
+
+EOD;
+    if (isset($freenas_config['ftp']['banner'])) {
+      $ftpconf .= <<<EOD
+ftpd_banner={$freenas_config['ftp']['banner']}
+
+EOD;
+    } else {
+      $ftpconf .= <<<EOD
+ftpd_banner=Welcome to pfSense FTP service
+
+EOD;
+    }
+
+    if ($freenas_config['ftp']['pasv_min_port'] && $freenas_config['ftp']['pasv_max_port']) {
+      $ftpconf .= <<<EOD
+pasv_max_port={$freenas_config['ftp']['pasv_max_port']}
+pasv_min_port={$freenas_config['ftp']['pasv_min_port']}
+
+EOD;
+    }
+
+    if ($freenas_config['ftp']['pasv_address']) {
+      $ftpconf .= <<<EOD
+pasv_address={$freenas_config['ftp']['pasv_address']}
+
+EOD;
+    }
+
+    fwrite($fd, $ftpconf);
+    fclose($fd);
+
+    /* run vsftpd */
+    mwexec("/usr/local/sbin/vsftpd {$g['varetc_path']}/vsftpd.conf");
+
+    if ($g['booting']) { echo "done\n"; }
+  }
+
+  return 0;
+}
+
+function services_pureftpd_configure() {
+  global $freenas_config, $g;
+
+  /* kill any Pure-FTPD */
+  killbyname("pure-ftpd");
+
+  if (isset($freenas_config['ftp']['enable'])) {
+    if ($g['booting']) { echo "Starting FTP server... "; }
+
+    /* Generate the banner file */
+    $fd = fopen("/mnt/.banner", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open .banner in services_pureftpd_configure().\n");
+      return 1;
+    }
+
+    if (empty($freenas_config['ftp']['banner'])) {
+      $banner = <<<EOD
+Welcome to pfSense FTP service
+	
+EOD;
+    } else {
+      $banner = <<<EOD
+{$freenas_config['ftp']['banner']}
+
+EOD;
+    } // end if
+
+    fwrite($fd, $banner);
+    fclose($fd);
+
+    /* run pure-ftpd */
+    $cmd = "/usr/local/sbin/pure-ftpd -S {$freenas_config['ftp']['port']} -c {$freenas_config['ftp']['numberclients']} -C {$freenas_config['ftp']['maxconperip']} -I {$freenas_config['ftp']['timeout']} -M U 077:077 -B -b ";
+
+    if ( (isset($freenas_config['ftp']['anonymous'])) && (!isset($freenas_config['ftp']['localuser']))) {
+      $cmd .= "-e ";
+    }
+
+    if ( (!isset($freenas_config['ftp']['anonymous'])) && (isset($freenas_config['ftp']['localuser']))) {
+    $cmd .= "-E ";
+    }
+
+    if ($freenas_config['ftp']['pasv_min_port'] && $freenas_config['ftp']['pasv_max_port']) {
+      $cmd .= "-p {$freenas_config['ftp']['pasv_min_port']}:{$freenas_config['ftp']['pasv_max_port']} ";
+    }
+
+    if ($freenas_config['ftp']['pasv_address']) {
+      $cmd .= "-P {$freenas_config['ftp']['pasv_address']} ";
+    }
+
+    if ($freenas_config['ftp']['natmode']) {
+      $cmd .= "-N ";
+    }
+
+    if ($freenas_config['ftp']['passiveip']) {
+      $cmd .= "-P {$freenas_config['ftp']['passiveip']} ";
+    }
+
+    if ($freenas_config['ftp']['fxp']) {
+      $cmd .= "-W ";
+    }
+
+    mwexec($cmd);
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  return 0;
+}
+
+/* Stop smartd, Generate the configuration file and start
+ * smartd Return 0 if OK, 1 or error code if error
+ */
+function services_smart_configure() {
+  global $config, $g;
+
+  /* kill any running smartd */
+  killbyname("smartd");
+
+  if (isset($config['system']['smart'])) {
+    if ($g['booting']) { echo "Starting smartd... "; }
+
+    /* run smartd */
+    mwexec("/usr/local/sbin/smartd --logfacility=local5");
+
+    if ($g['booting']) { echo "done\n"; }
+  }
+
+  return 0;
+}
+
+/* Generate the unison configuration
+ * Return 0 if OK, 1 or error code if error
+ */
+function services_unison_configure() {
+  global $freenas_config, $g;
+  $result = 0 ;
+
+  if ($g['booting']) { echo "Configuring  unison... \n"; }
+
+  if (isset($freenas_config['unison']['enable'])) {
+    /* ensure unison workdir exists */
+    $workdir = "/mnt/{$freenas_config['unison']['share']}/{$config['unison']['workdir']}";
+    
+    if (isset($freenas_config['unison']['makedir']) && !file_exists($workdir)) {
+      if (!mkdir($workdir)) {
+        printf("Error: cannot mkdir $workdir in services_unison_configure().\n");
+      }
+      
+      exec("/bin/chmod 775 $workdir");
+    }
+    
+    if (!file_exists($workdir)) {
+      printf("Error: cannot open $workdir in services_unison_configure().\n");
+      $result = 1 ;
+    }
+
+    /* add workdir to login.conf UNISON environment variable */
+    $logfile = "{$g['etc_path']}/login.conf";
+    
+    if (!file_exists("$logfile")) {
+      printf("Error: $logfile doesn't exist, in services_unison_configure().\n");
+      $result = 1 ;
+    }
+    
+    $tmp = file_get_contents("$logfile");
+    $search = "/UNISON=.*?(?=[,:])/";
+    
+    if (!preg_match($search, $tmp)) {
+      printf("Error: cannot find UNISON in $logfile, in services_unison_configure().\n");
+      $result = 1 ;
+    }
+    
+    $tmp = preg_replace($search, "UNISON=$workdir", $tmp);
+    
+    if (!file_put_contents($logfile, $tmp)) {
+      printf("Error: couldn't write $logfile, in services_unison_configure().\n");
+      $result = 1 ;
+    }
+  } // end if
+
+  $tmp = "";
+
+  return $result;
+}
+
+/* Stop and start ushare
+ * Return 0 if OK, 1 or error code if error
+ */
+function services_ushare_configure() {
+  global $freenas_config, $g;
+
+  $result = 0 ;
+
+  /* Kill any running uShare */
+  killbyname("ushare");
+
+  /* Delete multicast route. */
+  mwexec("/sbin/route delete -net 239.0.0.0");
+
+  if(isset($freenas_config['upnp']['enable'])) {
+    if($g['booting']) { echo "Starting UPnP server... "; }
+
+    /* Setup a multicast route for UPnP messages. */
+    // TODO: where to get the upnp iface?
+    $result = mwexec("/sbin/route add -net 239.0.0.0 -netmask 255.0.0.0 -interface " . escapeshellarg($freenas_config['upnp']['if']));
+
+    $content = "";
+    foreach($freenas_config['upnp']['content'] as $contentv) {
+      $content .= " --content=$contentv";
+    }
+
+    /* Run uShare as daemon. */
+    // TODO: where to get the upnp iface?
+    $result |= mwexec("/usr/local/bin/ushare --daemon --no-web --name={$freenas_config['upnp']['name']} --interface={$freenas_config['upnp']['if']} {$content}");
+  } // end if
+
+  return $result;
+}
+
+function services_cron_configure() {
+  global $freenas_config, $g;
+  
+  /* kill any running cron */
+  killbyname("cron");
+
+  /* ======================================================================= */
+  /* =               configure crontab item for rsyncclient                = */
+  /* ======================================================================= */
+  if (isset($freenas_config['rsyncclient']['enable'])) {
+    if ($g['booting']) { echo "Configuring cron for rsync client... "; }
+
+    if ($freenas_config['rsyncclient']['all_mins'] == "0") { 
+      foreach ($freenas_config['rsyncclient']['minute'] as $minutev) {
+        if (strlen($cron_min) > 0) {
+          $cron_min = $cron_min . "," . $minutev;
+        } else {
+          $cron_min = $minutev;
+        }
+      } // end foreach
+    } else {
+      $cron_min = "*";
+    } // end if
+
+    if ($freenas_config['rsyncclient']['all_hours'] == "0") { 
+      foreach ($freenas_config['rsyncclient']['hour'] as $hourv) {
+        if (strlen($cron_hour) > 0) {
+          $cron_hour = $cron_hour . "," . $hourv;
+        } else {
+          $cron_hour = $hourv;
+        }
+      } // end foreach
+    } else {
+      $cron_hour = "*";
+    } // end if
+
+    if ($freenas_config['rsyncclient']['all_days'] == "0") { 
+      foreach ($freenas_config['rsyncclient']['day'] as $dayv) {
+        if (strlen($cron_day) > 0) {
+          $cron_day = $cron_day . "," . $dayv;
+        } else {
+          $cron_day = $dayv;
+        }
+      } // end foreach
+    } else {
+      $cron_day = "*";
+    } // end if
+
+    if ($freenas_config['rsyncclient']['all_months'] == "0") {
+      foreach ($freenas_config['rsyncclient']['month'] as $monthv) {
+        if (strlen($cron_month) > 0) {
+          $cron_month = $cron_month . "," . $monthv;
+        } else {
+          $cron_month = $monthv;
+        }
+      } // end foreach
+    } else {
+      $cron_month = "*";
+    } // end if
+
+    if ($freenas_config['rsyncclient']['all_weekday'] == "0") {
+      foreach ($freenas_config['rsyncclient']['weekday'] as $weekdayv) {
+        if (strlen($cron_weekday) > 0) {
+          $cron_weekday = $cron_weekday . "," . $weekdayv;
+        } else {
+          $cron_weekday = $weekdayv;
+        }
+      } // end foreach
+    } else {
+      $cron_weekday = "*";
+    } // end if
+    
+    $cron_item = array();
+    $cron_item['minute'] = "{$cron_min}";
+    $cron_item['hour'] = "{$cron_hour}";
+    $cron_item['mday'] = "{$cron_day}";
+    $cron_item['month'] = "{$cron_month}";
+    $cron_item['wday'] = "{$cron_weekday}";
+    $cron_item['who'] = "root";
+    $cron_item['command'] = "{$g['varrun_path']}/sync.sh";
+    
+    $config['cron']['item'][] = $cron_item;
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  /* Erase all variable used previously */
+  unset ($cron_min, $cron_hour, $cron_day, $cron_month, $cron_weekday);
+  
+  /* ======================================================================= */
+  /* =           configure crontab item for rsync local part               = */
+  /* ======================================================================= */
+  if (isset($freenas_config['rsync_local']['enable'])) {
+    if ($g['booting']) { echo "Configuring cron for local rsync... "; }
+
+    if ($freenas_config['rsync_local']['all_mins'] == "0") {
+      foreach ($freenas_config['rsync_local']['minute'] as $minutev) {
+        if (strlen($cron_min) > 0) {
+          $cron_min = $cron_min . "," . $minutev;
+        } else {
+          $cron_min = $minutev;
+        }
+      } // end foreach
+    } else {
+      $cron_min = "*";
+    } // end if
+
+    if ($freenas_config['rsync_local']['all_hours'] == "0") { 
+      foreach ($freenas_config['rsync_local']['hour'] as $hourv) {
+        if (strlen($cron_hour) > 0) {
+          $cron_hour = $cron_hour . "," . $hourv;
+        } else {
+          $cron_hour = $hourv;
+        }
+      } // end foreach
+    } else {
+      $cron_hour = "*";
+    } // end if
+
+    if ($freenas_config['rsync_local']['all_days'] == "0") {
+      foreach ($freenas_config['rsync_local']['day'] as $dayv) {
+        if (strlen($cron_day) > 0) {
+          $cron_day = $cron_day . "," . $dayv;
+        } else {
+          $cron_day = $dayv;
+        }
+      } // end foreach
+    } else {
+      $cron_day = "*";
+    } // end if
+
+    if ($freenas_config['rsync_local']['all_months'] == "0") {
+      foreach ($freenas_config['rsync_local']['month'] as $monthv) {
+        if (strlen($cron_month) > 0) {
+          $cron_month = $cron_month . "," . $monthv;
+        } else {
+          $cron_month = $monthv;
+        }
+      } // end foreach
+    } else {
+      $cron_month = "*";
+    } // end if
+
+    if ($freenas_config['rsync_local']['all_weekday'] == "0") {
+      foreach ($freenas_config['rsync_local']['weekday'] as $weekdayv) {
+        if (strlen($cron_weekday) > 0) {
+          $cron_weekday = $cron_weekday . "," . $weekdayv;
+        } else {
+          $cron_weekday = $weekdayv;
+        }
+      } // end foreach
+    } else {
+      $cron_weekday = "*";
+    }
+
+    $cron_item = array();
+    $cron_item['minute'] = "{$cron_min}";
+    $cron_item['hour'] = "{$cron_hour}";
+    $cron_item['mday'] = "{$cron_day}";
+    $cron_item['month'] = "{$cron_month}";
+    $cron_item['wday'] = "{$cron_weekday}";
+    $cron_item['who'] = "root";
+    $cron_item['command'] = "{$g['varrun_path']}/sync.sh";
+    
+    $config['cron']['item'][] = $cron_item;
+
+    if ($g['booting']) { echo "done\n"; }
+  }
+
+  /* Erase all variable used previously */
+  unset ($cron_min, $cron_hour, $cron_day, $cron_month, $cron_weekday);
+
+  /* ======================================================================= */
+  /* =                configure crontab item shutdown part                 = */
+  /* ======================================================================= */
+  if (isset($freenas_config['shutdown']['enable'])) {
+    if ($g['booting']) { echo "Configuring cron for shutdown... "; }
+
+    if ($freenas_config['shutdown']['all_mins'] == "0") { 
+      foreach ($freenas_config['shutdown']['minute'] as $minutev) {
+        if (strlen($cron_min) > 0) {
+          $cron_min = $cron_min . "," . $minutev;
+        } else {
+          $cron_min = $minutev;
+        }
+      } // end foreach
+    } else {
+      $cron_min = "*";
+    } // end if
+
+    if ($freenas_config['shutdown']['all_hours'] == "0") {
+      foreach ($freenas_config['shutdown']['hour'] as $hourv) {
+        if (strlen($cron_hour) > 0) {
+          $cron_hour = $cron_hour . "," . $hourv;
+        } else {
+          $cron_hour = $hourv;
+        }
+      } // end foreach
+    } else {
+      $cron_hour = "*";
+    } // end if
+
+    if ($freenas_config['shutdown']['all_days'] == "0") {
+      foreach ($freenas_config['shutdown']['day'] as $dayv) {
+        if (strlen($cron_day) > 0) {
+          $cron_day = $cron_day . "," . $dayv;
+        } else {
+          $cron_day = $dayv;
+        }
+      } // end foreach
+    } else {
+      $cron_day = "*";
+    } // end if
+
+    if ($freenas_config['shutdown']['all_months'] == "0") {
+      foreach ($freenas_config['shutdown']['month'] as $monthv) {
+        if (strlen($cron_month) > 0) {
+          $cron_month = $cron_month . "," . $monthv;
+        } else {
+          $cron_month = $monthv;
+        }
+      } // end foreach
+    } else {
+      $cron_month = "*";
+    } // end if
+
+    if ($freenas_config['shutdown']['all_weekday'] == "0") {
+      foreach ($freenas_config['shutdown']['weekday'] as $weekdayv) {
+        if (strlen($cron_weekday) > 0) {
+          $cron_weekday = $cron_weekday . "," . $weekdayv;
+        } else {
+          $cron_weekday = $weekdayv;
+        }
+      } // end foreach
+    } else {
+      $cron_weekday = "*";
+    } // end if
+
+    $cron_item = array();
+    $cron_item['minute'] = "{$cron_min}";
+    $cron_item['hour'] = "{$cron_hour}";
+    $cron_item['mday'] = "{$cron_day}";
+    $cron_item['month'] = "{$cron_month}";
+    $cron_item['wday'] = "{$cron_weekday}";
+    $cron_item['who'] = "root";
+    $cron_item['command'] = "{$g['varrun_path']}/sync.sh";
+    
+    $config['cron']['item'][] = $cron_item;
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  /* call the pfSense configure_cron function */
+  configure_cron();
+
+  /* run cron */
+  mwexec("/usr/sbin/cron -s");
+
+  return 0;
+}
+
+function services_rsyncclient_configure() {
+  global $freenas_config, $g;
+
+  // Generate a shell script that is used by cron
+  // Generate crontab works
+  if (isset($freenas_config['rsyncclient']['enable'])) {
+    if ($g['booting']) { echo "Generating synchronizing cron script... "; }
+
+    /* generate /var/run/sync.sh script */
+    $fd = fopen("{$g['varrun_path']}/sync.sh", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open /var/run/sync.sh in services_rsyncclient_configure().\n");
+      return 1;
+    }
+
+    $syncscript = <<<EOD
+#!/bin/sh
+
+if [ -r /var/run/rsync-running ]; then
+exit
+fi
+/usr/bin/touch /var/run/rsync-running
+
+EOD;
+
+    $opt_delete="";
+    if (isset($freenas_config['rsyncclient']['opt_delete'])) {
+      $opt_delete = "--delete --delete-after ";
+    }
+
+    foreach ($freenas_config['rsyncclient']['sharetosync'] as $sharek => $sharev) {
+      $syncscript .= <<<EOD
+/usr/local/bin/rsync -rtz {$opt_delete}rsync://{$freenas_config['rsyncclient']['rsyncserverip']}/{$sharev} /mnt/{$sharev}
+
+EOD;
+    } // end foreach
+
+    $syncscript .= <<<EOD
+/bin/rm -f /var/run/rsync-running
+
+EOD;
+
+    fwrite($fd,$syncscript);
+    fclose($fd);
+
+    /* Add exectutive right to the script */
+    exec("/bin/chmod 770 {$g['varrun_path']}/sync.sh");
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  return 0;
+}
+
+function services_rsync_local_configure() {
+  global $freenas_config, $g;
+
+  // Generate a shell script that is used by cron
+  // Generate crontab works
+  if (isset($freenas_config['rsync_local']['enable'])) {
+    if ($g['booting']) { echo "Generating local rsync cron script... "; }
+
+    /* generate /var/run/sync_local.sh script */
+    $fd = fopen("{$g['varrun_path']}/sync_local.sh", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open /var/run/sync_local.sh in services_rsync_local_configure().\n");
+      return 1;
+    }
+
+    $syncscript = <<<EOD
+#!/bin/sh
+
+if [ -r /var/run/rsync_local-running ]; then
+exit
+fi
+/usr/bin/touch /var/run/rsync_local-running
+
+EOD;
+
+    $opt_delete="";
+    if (isset($freenas_config['rsync_local']['opt_delete'])) {
+      $opt_delete = "--delete --delete-after ";
+    }
+
+    $syncscript .= <<<EOD
+/usr/local/bin/rsync -a {$opt_delete} /mnt/{$freenas_config['rsync_local']['source']} /mnt/{$freenas_config['rsync_local']['destination']}
+
+EOD;
+
+    $syncscript .= <<<EOD
+/bin/rm -f /var/run/rsync_local-running
+
+EOD;
+
+    fwrite($fd,$syncscript);
+    fclose($fd);
+
+    /* Add exectutive right to the script */
+    exec("/bin/chmod 770 {$g['varrun_path']}/sync_local.sh");
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  return 0;
+}
+
+function services_radius_configure() {
+  global $freenas_config, $g;
+
+  if (isset($config['radius']['enable'])) {
+    /* generate radius.conf */
+    $fd = fopen("{$g['varetc_path']}/radius.conf", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open radius.conf in services_radius_configure().\n");
+      return 1;
+    }
+
+    $radiusconf = <<<EOD
+auth  {$config['radius']['radiusip']}:{$config['radius']['port']} {$config['radius']['secret']} {$config['radius']['timeout']} {$config['radius']['maxretry']}
+
+EOD;
+
+    fwrite($fd, $radiusconf);
+    fclose($fd);
+  } // end if
+
+  return 0;
+}
+
+/* Stop, Generate the config file and start
+ * AFP Return 0 if OK, 1 or error code if error
+ */
+function services_afpd_configure() {
+  global $freenas_config, $config, $g;
+
+  /* kill any afpd */
+  killbyname("afpd");
+
+  if (isset($freenas_config['afp']['enable'])) {
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { return 1; }
+    if ($g['booting']) { echo "Starting AFP server... "; }
+
+    if (empty($freenas_config['afp']['afpname'])) {
+      $afpname="-";
+    } else {
+      $afpname=$freenas_config['afp']['afpname'];
+    }
+    
+    /* generate afpd.conf */
+    $fd = fopen("{$g['varetc_path']}/afpd.conf", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open afpd.conf in services_afpd_configure().\n");
+      return 1;
+    }
+
+    $afpconf = <<<EOD
+{$afpname} -transall -uamlist
+EOD;
+
+    if (empty($config['system']['zeroconf_disable'])) {
+      $afpconf .= <<<EOD
+ -noslp -fqdn {$config['system']['hostname']}.{$config['system']['domain']} -uamlist
+EOD;
+    } else {
+      $afpconf .= <<<EOD
+ -noslp -nozeroconf -uamlist
+EOD;
+    } // end if
+
+    if (isset($freenas_config['afp']['guest']) && isset($freenas_config['afp']['local']) ) {
+      $afpconf .= <<<EOD
+ uams_guest.so,uams_clrtxt.so,uams_dhx.so
+EOD;
+    } else if (isset($freenas_config['afp']['guest'])) {
+      $afpconf .= <<<EOD
+ uams_guest.so
+EOD;
+    } else if (isset($freenas_config['afp']['local'])) {
+      $afpconf .= <<<EOD
+ uams_clrtxt.so,uams_dhx.so
+EOD;
+  }
+  
+    $afpconf .= <<<EOD
+ -nosavepassword -defaultvol {$g['varetc_path']}/AppleVolumes.default -systemvol {$g['varetc_path']}/AppleVolumes.system -uampath /etc/uams -guestname ftp
+
+EOD;
+
+    fwrite($fd, $afpconf);
+    fclose($fd);
+
+    /* generate AppleVolumes.default */
+    $fd = fopen("{$g['varetc_path']}/AppleVolumes.default", "w");
+    
+    if (!$fd) {
+      printf("Error: cannot open AppleVolumes.default in services_afpd_configure().\n");
+      return 1;
+    }
+
+    $a_mount = &$freenas_config['mounts']['mount'];
+    
+    foreach ($a_mount as $mount) {
+      $AppleVolumes .= <<<EOD
+/mnt/{$mount['sharename']} "{$mount['sharename']}" 
+
+EOD;
+
+    } // end foreach
+
+    fwrite($fd, $AppleVolumes);
+    fclose($fd);
+
+    /* run afpdpd */
+    mwexec("/usr/local/sbin/afpd -F {$g['varetc_path']}/afpd.conf");
+
+    if ($g['booting']) { echo "done\n"; }
+  } // end if
+
+  return 0;
+}
+
+function services_nis_configure() {
+  global $freenas_config, $g;
+
+  return 0;
+}
+
+/* Start iscsi initiator
+ * Return 0 if Ok, 1 or error code if problem
+ */
+/* TODO: NEED TO STOP IT TOO ??? */
+function services_iscsi_configure() {
+  global $freenas_config, $g;
+
+  if (isset($freenas_config['iscsi']['enable'])) {
+    if ($g['booting']) { echo "Starting iSCSI driver... "; }
+
+    $result = mwexec("/sbin/kldload kdload /boot/kernel/iscsi_initiator.ko");
+    $result |= mwexec("/sbin/sysctl debug.iscsi=0");
+    $result |= mwexec("/usr/local/sbin/iscontrol targetaddress={$freenas_config['iscsi']['targetaddress']} TargetName={$freenas_config['iscsi']['targetname']}");
+
+    if ($g['booting']) { echo "done\n"; }
+  }
+
+  if (isset($result)) { return $result; }
+  return 0;
+}
+
+function services_zeroconf_configure() {
+  //services_mdnsresponder_configure();
+  //services_howl_configure();
+  return services_avahi_configure();
+}
+
+function services_avahi_configure() {
+  global $freenas_config, $config, $g;
+
+  $service_template = <<<EOD
+<?xml version="1.0" standalone='no'?>
+<!DOCTYPE service-group SYSTEM "avahi-service.dtd">
+<service-group>
+
+  <name replace-wildcards="yes">@SERVICE_DESC@ on %h</name>
+
+  <service>
+    <type>@TYPE@</type>
+    <port>@PORT@</port>
+    @TXT_RECORDS@
+  </service>
+
+</service-group>
+
+EOD;
+
+  /* kill any running dbus daemon */
+  sigkillbypid("{$g['varrun_path']}/dbus/dbus.pid", "TERM");
+
+  unlink_if_exists("{$g['varrun_path']}/dbus/dbus.pid");
+
+  /* kill any running avahi daemons */
+  mwexec("/usr/local/sbin/avahi-daemon -k");
+
+  /* simply return if zeroconf isn't enabled */
+  if (isset($config['system']['zeroconf_disable'])) { return 0; }
+  
+  /* configure Avahi and it's dependencies */
+  if (! file_exists("/usr/local/etc/avahi/services")) {
+    mwexec("mkdir -p /usr/local/etc/avahi/services");
+  }
+
+  /* add HTTP service type */
+  $webproto = $config['system']['webgui']['protocol'];
+  
+  if (isset($config['system']['webgui']['port'])) {
+    $webservice = str_replace("@PORT@",
+                              $config['system']['webgui']['port'],
+                              $service_template);
+    $webservice = str_replace("@TYPE@",
+                              "_{$webproto}._tcp",
+                                          $webservice);
+    $webservice = str_replace("@SERVICE_DESC@",
+                              "pfSense webGUI",
+                              $webservice);
+    $webservice = str_replace("@TXT_RECORDS@",
+                              "",
+                              $webservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/http.service", $webservice);
+  } else {
+    $webservice = str_replace("@PORT@",
+                              "80",
+                               $service_template);
+    $webservice = str_replace("@TYPE@",
+                              "_{$webproto}._tcp",
+                              $webservice);
+    $webservice = str_replace("@SERVICE_DESC@",
+                              "pfSense webGUI",
+                              $webservice);
+    $webservice = str_replace("@TXT_RECORDS@",
+                              "",
+                              $webservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/http.service", $webservice);
+  } // end if
+
+  /* afp is announcing itself */
+  if (isset($freenas_config['afp']['enable'])) {
+    /* NOP */
+  }
+
+  /* add rsync service type */
+  if (isset($freenas_config['rsyncd']['enable'])) {
+    $rsyncservice = str_replace("@PORT@",
+                                $freenas_config['rsyncd']['port'],
+                                $service_template);
+    $rsyncservice = str_replace("@TYPE@",
+                                "_rsync._tcp",
+                                $rsyncservice);
+    $rsyncservice = str_replace("@SERVICE_DESC@",
+                                "Remote Sync Daemon",
+                                $rsyncservice);
+    $rsyncservice = str_replace("@TXT_RECORDS@",
+                                "",
+                                $rsyncservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/rsync.service", $rsyncservice);
+  } // end if
+  
+  /* add ntp service type */
+  if ($config['ntpd']['mode'] == "server") {
+    $ntpdservice = str_replace("@PORT@",
+                               "123",
+                               $service_template);
+    $ntpdservice = str_replace("@TYPE@",
+                               "_ntp._udp",
+                               $ntpdservice);
+    $ntpdservice = str_replace("@SERVICE_DESC@",
+                               "Network Time Daemon",
+                               $ntpdservice);
+    $ntpdservice = str_replace("@TXT_RECORDS@",
+                               "",
+                               $ntpdservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/ntpd.service", $ntpdservice);
+  } // end if
+
+  if (isset($config['system']['ssh']['enable'])) {
+    $sshservice = str_replace("@PORT@",
+                              "22",
+                              $service_template);
+    $sshservice = str_replace("@TYPE@",
+                              "_ssh._tcp",
+                              $sshservice);
+    $sshservice = str_replace("@SERVICE_DESC@",
+                              "Remote Terminal",
+                              $sshservice);
+    $sshservice = str_replace("@TXT_RECORDS@",
+                              "",
+                              $sshservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/ssh.service", $sshservice);
+    
+    /* do the same for sftp, cause we do enable it by dfeault */
+    $sftpservice = str_replace("@PORT@",
+                               "22",
+                               $service_template);
+    $sftpservice = str_replace("@TYPE@",
+                               "_ssh._tcp",
+                               $sftpservice);
+    $sftpservice = str_replace("@SERVICE_DESC@",
+                               "Remote Terminal",
+                               $sftpservice);
+    $sftpservice = str_replace("@TXT_RECORDS@",
+                               "",
+                               $sftpservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/ssh-sftp.service", $sftpservice);
+  } // end if
+
+  /* we are using wzdftpd, which has the ability to announce itself */
+  if (isset($freenas_config['ftp']['enable'])) {
+    /* NOP */
+  }
+
+  if (isset($freenas_config['samba']['enable'])) {
+    $cifsservice = str_replace("@PORT@",
+                               "139",
+                               $service_template);
+    $cifsservice = str_replace("@TYPE@",
+                               "_smb._tcp",
+                               $cifsservice);
+    $cifsservice = str_replace("@SERVICE_DESC@",
+                               "Samba Server",
+                               $cifsservice);
+    $cifsservice = str_replace("@TXT_RECORDS@",
+                               "",
+                               $cifsservice);
+
+    file_put_contents("/usr/local/etc/avahi/services/cifs.service", $cifsservice);
+  }
+
+  if (isset($freenas_config['nfs']['enable'])) {
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { break; }
+    
+    $a_mount = &$freenas_config['mounts']['mount'];
+
+    foreach ($a_mount as $mount) {
+      $sharename = str_replace(" ", "", $mount['sharename']);
+      $sharename = strtolower($sharename);
+                        
+      $nfsservice = str_replace("@PORT@",
+                                "2049",
+                                $service_template);
+      $nfsservice = str_replace("@TYPE@",
+                                "_nfs._tcp",
+                                $nfsservice);
+      $nfsservice = str_replace("@SERVICE_DESC@",
+                                "NFS Mount: {$mount['sharename']}",
+                                $nfsservice);
+      $nfsservice = str_replace("@TXT_RECORDS@",
+                                "path=/mnt/{$mount['sharename']}",
+                                $nfsservice);
+
+      file_put_contents("/usr/local/etc/avahi/services/{$sharename}_nfs.service", $nfsservice);
+    } // end foreach
+  } // end if
+
+  /* run dbus */
+  mwexec("/usr/local/bin/dbus-daemon --system");
+  /* run avahi */
+  mwexec("/usr/local/sbin/avahi-daemon -D");
+
+  if ($g['booting']) { echo "done\n"; }
+
+  return 0;
+}
+
+/* this function is currently not used */
+function services_howl_configure() {
+  global $freenas_config, $config, $g;
+
+  /* kill any mDNSResponder */
+  killbyname("mDNSResponder");
+
+  if (isset($config['system']['zeroconf_disable'])) { return 0; }
+
+  $fd = fopen("{$g['varetc_path']}/mDNSResponder.conf", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open mDNSResponder.conf in services_howl_configure().\n");
+    return 1;
+  }
+
+  if ($config['system']['webgui']['port']) {
+    $mDNSResponder = <<<EOD
+"{$config['system']['hostname']} Web Admin"	_http._tcp	local.	{$config['system']['webgui']['port']}
+
+EOD;
+  } else {
+    $mDNSResponder = <<<EOD
+"{$config['system']['hostname']} Web Admin"	_http._tcp	local.	80
+
+EOD;
+  } // end if
+
+  if (isset($freenas_config['afp']['enable'])) {
+    $mDNSResponder .= <<<EOD
+"{$config['system']['hostname']} AFP Server"	_afpovertcp._tcp	local.	548
+
+EOD;
+  }
+
+  if (isset($freenas_config['rsyncd']['enable'])) {
+    $mDNSResponder .= <<<EOD
+"{$config['system']['hostname']} RSYNC Server"	_rsync._tcp.	local.	{$freenas_config['rsyncd']['port']}
+
+EOD;
+  }
+
+  if (isset($config['sshd']['enable'])) {
+    $mDNSResponder .= <<<EOD
+"{$config['system']['hostname']} SSH Server"	_ssh._tcp	local.	{$config['sshd']['port']}
+
+EOD;
+  }
+
+  if (isset($freenas_config['ftp']['enable'])) {
+    $mDNSResponder .= <<<EOD
+"{$config['system']['hostname']} FTP Server"	_ftp._tcp	local.	{$freenas_config['ftp']['port']}
+
+EOD;
+  }
+
+  if (isset($freenas_config['samba']['enable'])) {
+    $mDNSResponder .= <<<EOD
+"{$config['system']['hostname']} Samba Server"	_smb._tcp	local.	139
+
+EOD;
+  }
+
+  if (isset($freenas_config['nfs']['enable'])) {
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { break; }
+
+    $a_mount = &$freenas_config['mounts']['mount'];
+
+    foreach ($a_mount as $mount) {
+      $mDNSResponder .= <<<EOD
+"{$config['system']['hostname']} NFS: {$mount['sharename']}"	_nfs._tcp	local.	2049 path=/mnt/{$mount['sharename']}
+
+EOD;
+    } // end foreach
+  } // end if
+
+  fwrite($fd, $mDNSResponder);
+  fclose($fd);
+
+
+  /* run mDNSResponder */
+  mwexec("/usr/local/sbin/mDNSResponder -f {$g['varetc_path']}/mDNSResponder.conf");
+
+  if ($g['booting']) { echo "done\n"; }
+
+  return 0;
+}
+
+/* this function is currently not used */
+function services_mdnsresponder_configure() {
+  global $freenas_config, $config, $g;
+
+  /* kill any running snmpd */
+  sigkillbypid("{$g['varrun_path']}/mDNSResponder.pid", "TERM");
+
+  if (isset($config['system']['zeroconf_disable'])) { return 0; }
+
+  $fd = fopen("{$g['varetc_path']}/mDNSResponder.conf", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open mDNSResponder.conf in services_bonjour_configure().\n");
+    return 1;
+  }
+
+  if ($config['system']['webgui']['port']) {
+    $mDNSResponder = <<<EOD
+"{$config['system']['hostname']} Web Admin"
+_http._tcp local.
+{$config['system']['webgui']['port']}
+
+EOD;
+  } else {
+    $mDNSResponder = <<<EOD
+"{$config['system']['hostname']} Web Admin"
+_http._tcp local.
+80
+
+EOD;
+  } // end if
+
+  if (isset($freenas_config['afp']['enable'])) {
+    $mDNSResponder .= <<<EOD
+
+"{$config['system']['hostname']} AFP Server"
+_afpovertcp._tcp local.
+548
+
+EOD;
+  }
+
+  if (isset($freenas_config['rsyncd']['enable'])) {
+    $mDNSResponder .= <<<EOD
+
+"{$config['system']['hostname']} RSYNC Server"
+_rsync._tcp. local.
+{$freenas_config['rsyncd']['port']}
+
+EOD;
+  }
+
+  if (isset($config['sshd']['enable'])) {
+    $mDNSResponder .= <<<EOD
+
+"{$freenas_config['system']['hostname']} SSH Server"
+_ssh._tcp local.
+{$config['sshd']['port']}
+
+EOD;
+  }
+
+  if (isset($freenas_config['ftp']['enable'])) {
+    $mDNSResponder .= <<<EOD
+
+"{$config['system']['hostname']} FTP Server"
+_ftp._tcp local.
+{$freenas_config['ftp']['port']}
+
+EOD;
+  }
+
+  if (isset($freenas_config['samba']['enable'])) {
+    $mDNSResponder .= <<<EOD
+
+"{$config['system']['hostname']} Samba Server"
+_smb._tcp local.
+139
+
+EOD;
+  }
+
+  if (isset($freenas_config['nfs']['enable'])) {
+    /* If no share configured, exit */
+    if (!is_array($freenas_config['mounts']['mount'])) { break; }
+
+    $a_mount = &$freenas_config['mounts']['mount'];
+
+    foreach ($a_mount as $mount) {
+      $mDNSResponder .= <<<EOD
+
+"{$config['system']['hostname']} NFS: {$mount['sharename']}"
+_nfs._tcp local.
+2049 path=/mnt/{$mount['sharename']}
+
+EOD;
+    } // end foreach
+  }
+
+  fwrite($fd, $mDNSResponder);
+  fclose($fd);
+
+
+  /* run mDNSResponder */
+  mwexec("/usr/local/sbin/mDNSResponderPosix -b -f {$g['varetc_path']}/mDNSResponder.conf");
+
+  if ($g['booting']) { echo "done\n"; }
+
+  return 0;
+}
+?>
\ No newline at end of file
diff --git a/config/archive/freenas/pkg/freenas_system.inc b/config/archive/freenas/pkg/freenas_system.inc
new file mode 100644
index 00000000..2bd0a30a
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_system.inc
@@ -0,0 +1,838 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas_system.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+require_once("globals.inc");
+
+$freenas_config =& $config['installedpackages']['freenas']['config'][0];
+
+function system_do_extensions($early = false) {
+  global $config, $g;
+
+  if (!is_dir("{$g['etc_path']}/inc/ext")) { return; }
+
+  $dh = @opendir("{$g['etc_path']}/inc/ext");
+  
+  if ($dh) {
+    while (($extd = readdir($dh)) !== false) {
+      if (($extd === ".") || ($extd === "..")) { continue; }
+      
+      $rcfile = "{$g['etc_path']}/inc/ext/" . $extd . "/" . ($early ? "rc.early" : "rc");
+
+      if (file_exists($rcfile)) { passthru($rcfile); }
+    } // end while
+    
+    closedir($dh);
+  } // end if
+}
+
+function system_set_termcap() {
+  global $config;
+
+  if (isset($config['diag']['ipfstatentries'])) {
+    $lines = $config['diag']['ipfstatentries'] + 6;
+  } else {
+    $lines = 306;
+  }
+
+  /* do not remove the tabs below or replace them using whitespaces */
+  $termcap = <<<EOD
+cons25w|ansiw|ansi80x25-raw:\
+	:am:bs:NP:ms:pt:AX:eo:bw:ut:km:\
+	:co#80:li#25:pa#64:Co#8:it#8:\
+	:al=\E[L:cd=\E[J:ce=\E[K:cl=\E[H\E[J:cm=\E[%i%d;%dH:\
+	:dc=\E[P:dl=\E[M:do=\E[B:bt=\E[Z:ho=\E[H:ic=\E[@:cb=\E[1K:\
+	:nd=\E[C:rs=\Ec:so=\E[7m:se=\E[27m:up=\E[A:cr=^M:ta=^I:\
+	:AF=\E[3%dm:AB=\E[4%dm:op=\E[39;49m:sc=\E7:rc=\E8:\
+	:k1=\E[M:k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:\
+	:k9=\E[U:k;=\E[V:F1=\E[W:F2=\E[X:K2=\E[E:nw=\E[E:ec=\E[%dX:\
+	:kb=^H:kh=\E[H:ku=\E[A:kd=\E[B:kl=\E[D:kr=\E[C:le=^H:sf=\E[S:sr=\E[T:\
+	:kN=\E[G:kP=\E[I:@7=\E[F:kI=\E[L:kD=\\177:kB=\E[Z:\
+	:IC=\E[%d@:DC=\E[%dP:SF=\E[%dS:SR=\E[%dT:AL=\E[%dL:DL=\E[%dM:\
+	:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:UP=\E[%dA:cv=\E[%i%dd:ch=\E[%i%d`:\
+	:mb=\E[5m:md=\E[1m:mr=\E[7m:me=\E[m:bl=^G:\
+	:ve=\E[=S:vi=\E[=1S:vs=\E[=2S:
+cons25|ansis|ansi80x25:\
+	:ac=l\\332m\\300k\\277j\\331u\\264t\\303v\\301w\\302q\\304x\\263n\\305`^Da\\260f\\370g\\361~\\371.^Y-^Xh\\261i^U0\\333y\\363z\\362:\
+	:tc=cons25w:
+dumb|su|unknown:\
+	:am:co#132:li#$lines:do=^J:
+xterm-noapp|xterm with cursor keys in normal mode:\
+	:kl=\E[D:kd=\E[B:kr=\E[C:ku=\E[A:ks=\E=:ke=\E>:ti@:te@:tc=xterm:
+xterm|xterm-color|X11 terminal emulator:\
+	:ti@:te@:tc=xterm-xfree86:
+xterm-xfree86|XFree86 xterm:\
+	:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:\
+	:k5=\E[15~:k6=\E[17~:k7=\E[18~:k8=\E[19~:\
+	:k9=\E[20~:k;=\E[21~:F1=\E[23~:F2=\E[24~:\
+	:kH=\EOF:@7=\EOF:kI=\E[2~:\
+	:kh=\EOH:*6=\EOF:kP=\E[5~:kN=\E[6~:\
+	:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:Km=\E[M:tc=xterm-basic:
+xterm-basic|xterm common (XFree86):\
+	:li#24:co#80:am:kn#12:km:mi:ms:xn:bl=^G:\
+	:is=\E[!p\E[?3;4l\E[4l\E>:rs=\E[!p\E[?3;4l\E[4l\E>:le=^H:\
+	:AL=\E[%dL:DL=\E[%dM:DC=\E[%dP:al=\E[L:dc=\E[P:dl=\E[M:\
+	:UP=\E[%dA:DO=\E[%dB:LE=\E[%dD:RI=\E[%dC:\
+	:ho=\E[H:cd=\E[J:ce=\E[K:cl=\E[H\E[2J:cm=\E[%i%d;%dH:cs=\E[%i%d;%dr:\
+	:im=\E[4h:ei=\E[4l:ks=\E[?1h\E=:ke=\E[?1l\E>:kD=\E[3~:kb=^H:\
+	:sf=\n:sr=\EM:st=\EH:ct=\E[3g:sc=\E7:rc=\E8:\
+	:eA=\E(B\E)0:as=^N:ae=^O:ml=\El:mu=\Em:up=\E[A:nd=\E[C:\
+	:md=\E[1m:me=\E[m^O:mr=\E[7m:so=\E[7m:se=\E[27m:us=\E[4m:ue=\E[24m:\
+	:ti=\E[?1049h:te=\E[?1049l:vi=\E[?25l:ve=\E[?25h:\
+	:ut:Co#8:pa#64:op=\E[39;49m:AB=\E[4%dm:AF=\E[3%dm:\
+
+EOD;
+
+  if (!file_exists("/usr/share/misc")) { mkdir("/usr/share/misc"); }
+
+  $fd = @fopen("/usr/share/misc/termcap", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open termcap in system_set_termcap().\n");
+    return 1;
+  }
+  
+  chmod("/usr/share/misc/termcap", 0644);
+  fwrite($fd, $termcap);
+  fclose($fd);
+
+  return 0;
+}
+
+/* TODO: Figure out whether this function can be removed cause
+ *       implements its own user management framework.
+ */
+function system_users_create() {
+  /* Create All the passwd file */
+  global $config, $g;
+
+  if ($g['booting']) { echo "Generating user database... "; }
+
+  system_user_masterpasswd();
+  system_user_group();
+  system_user_pwdmkdb();
+
+  if ($g['booting']) { echo "done\n"; }
+
+  return 0;
+}
+
+/* TODO: Figure out whether this function can be removed cause
+ *       implements its own user management framework.
+ */
+function system_user_masterpasswd() {
+  /* Create the master.passwd file*/
+  global $config, $g, $userindex, $groupindex;
+  $root = getUNIXRoot();
+
+  $masterpasswd = <<<EOD
+root:{$root['password']}:0:0::0:0:Charlie &:/root:/bin/sh
+toor:*:0:0::0:0:Bourne-again Superuser:/root:
+daemon:*:1:1::0:0:Owner of many system processes:/root:/usr/sbin/nologin
+operator:*:2:5::0:0:System &:/:/usr/sbin/nologin
+bin:*:3:7::0:0:Binaries Commands and Source:/:/usr/sbin/nologin
+tty:*:4:65533::0:0:Tty Sandbox:/:/usr/sbin/nologin
+kmem:*:5:65533::0:0:KMem Sandbox:/:/usr/sbin/nologin
+smmsp:*:25:25::0:0:Sendmail Submission User:/var/spool/clientmqueue:/usr/sbin/nologin
+mailnull:*:26:26::0:0:Sendmail Default User:/var/spool/mqueue:/usr/sbin/nologin
+proxy:*:62:62::0:0:Packet Filter pseudo-user:/nonexistent:/usr/sbin/nologin
+_pflogd:*:64:64::0:0:pflogd privsep user:/var/empty:/usr/sbin/nologin
+www:*:80:80::0:0:World Wide Web Owner:/nonexistent:/usr/sbin/nologin
+nobody:*:65534:65534::0:0:Unprivileged user:/nonexistent:/usr/sbin/nologin
+dhcpd:*:1002:1002::0:0:DHCP Daemon:/nonexistent:/sbin/nologin
+_dhcp:*:65:65::0:0:dhcp programs:/var/empty:/usr/sbin/nologin
+_isakmpd:*:68:68::0:0:isakmpd privsep:/var/empty:/sbin/nologin
+ftp:*:21:50::0:0:FTP user:/mnt:/sbin/nologin
+sshd:*:22:22::0:0:Secure Shell Daemon:/var/empty:/usr/sbin/nologin
+
+EOD;
+
+  if (is_array($config['system']['user'])) {
+    foreach ($config['system']['user'] as $user) {
+      $password= $user['password'];
+      $groupname = $user['groupname'];
+      $group =& $config['system']['group'][$groupindex[$groupname]];
+
+      if (empty($user['uid'])) {
+        $newuser = assignUID($user['name']);
+        $newgroup = assignGID($groupname);
+        if (! empty($newuser)) { $user = $newuser; }
+        if (! empty($newgroup)) { $group = $newgroup; }
+      }
+
+      if (hasShellAccess($user['name'])) {
+        $masterpasswd .= <<<EOD
+{$user['name']}:{$password}:{$user['uid']}:{$group['gid']}::0:0:{$user['fullname']}:/mnt:/etc/rc.initial
+
+EOD;
+      } else {
+        $masterpasswd .= <<<EOD
+{$user['name']}:{$password}:{$user['uid']}:{$group['gid']}::0:0:{$user['fullname']}:/mnt:/usr/local/bin/scponly
+
+EOD;
+      } // end if
+    } // end foreach
+  } // end if
+
+  $fd = fopen("/etc/master.passwd", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open master.passwd in system_user_masterpasswd().\n");
+    return 1;
+  }
+
+  fwrite($fd, $masterpasswd);
+  fclose($fd);
+
+return 0;
+}
+
+/* TODO: Figure out whether this function can be removed cause
+ *       implements its own user management framework.
+ */
+function system_user_group() {
+  /* Create the group file*/
+  global $config, $g;
+
+  $groupfile = <<<EOD
+wheel:*:0:root
+EOD;
+
+  /* If user exist with full shell, put them on the wheel group */
+  if (is_array($config['system']['user'])) {
+    foreach ($config['system']['user'] as $user) {
+      if (hasShellAccess($user['name']) && isSystemAdmin($user['name'])) {
+        $groupfile .= <<<EOD
+,{$user['name']}
+EOD;
+      } // end if
+    } // end foreach
+  } // end if
+
+  $groupfile .= <<<EOD
+
+daemon:*:1:
+kmem:*:2:
+sys:*:3:
+tty:*:4:
+operator:*:5:root
+mail:*:6:
+bin:*:7:
+staff:*:20:
+EOD;
+
+  /* If user exist without full shell, put them on the staff group */
+  if (is_array($config['system']['user'])) {
+    foreach ($config['system']['user'] as $user) {
+      if (hasShellAccess($user['name'])) {
+        $groupfile .= <<<EOD
+{$user['name']},
+EOD;
+      } // end if
+    } // end foreach
+  } // end if
+
+  $groupfile .= <<<EOD
+
+sshd:*:22:
+smmsp:*:25:
+mailnull:*:26:
+guest:*:31:
+proxy:*:62:
+_pflogd:*:64:
+_dhcp:*:65:
+ftp:*:50:
+authpf:*:63:
+network:*:69:
+www:*:80:
+nogroup:*:65533:
+nobody:*:65534:
+admin:*:0:
+
+EOD;
+
+  if (is_array($config['system']['group'])) {
+    foreach ($config['system']['group'] as $group) {
+      if (empty($group['gid'])) {
+        $newgroup = assignGID($group['name']);
+        if (! empty($newgroup)) { $group = $newgroup; }
+      }
+
+      $groupfile .= <<<EOD
+{$group['name']}:*:{$group['gid']}:
+
+EOD;
+    } // end foreach
+  } // end if
+
+  $fd = fopen("/etc/group", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open group in system_user_group().\n");
+    return 1;
+  }
+
+  fwrite($fd, $groupfile);
+  fclose($fd);
+
+  return 0;
+}
+
+function system_user_pwdmkdb() {
+  /* Generate the db of password */
+  global $config, $g;
+
+  mwexec("/usr/sbin/pwd_mkdb -p -d /etc /etc/master.passwd");
+
+  return 0;
+}
+
+function system_user_samba() {
+  /* Generate the db of password */
+  
+  // TODO: MUST FIND A WAY OF USING UNIX CRYPTED PASSWORD IN THE PLACE OF CLEAR TEXT PASSWORD FOR GENERATING SAMBA DB!!!
+  
+  global $config, $g;
+  
+  if (is_array($config['system']['user'])) {
+    foreach ($config['system']['user'] as $user) {
+      /* TODO: the password in config.xml is already encrypted */
+      $password = escapeshellcmd($user['password']);
+      $login = escapeshellcmd($user['name']);
+      mwexec("(/bin/echo {$password}; /bin/echo {$password}) | /usr/local/bin/smbpasswd -s -a {$login}");
+      //mwexec("(/bin/echo {$password}; /bin/echo {$password}) | /usr/local/bin/pdbedit -tau {$login}");
+    } // end foreach
+  } // end if
+
+  return 0;
+
+}
+
+function system_pam_configure() {
+  /* Create the pam configuration files*/
+  global $config, $g;
+
+  if (!file_exists("{$g['varetc_path']}/pam.d")) {
+    mkdir("{$g['varetc_path']}/pam.d", 0744);
+  }
+
+  $system = <<<EOD
+# System-wide defaults
+# auth
+auth            sufficient      pam_opie.so             no_warn no_fake_prompts
+auth            requisite       pam_opieaccess.so       no_warn allow_local
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $system .= <<<EOD
+#auth	sufficient		/usr/local/lib/pam_winbind.so	debug try_first_pass
+
+EOD;
+  } 
+
+  $system .= <<<EOD
+auth    required		pam_unix.so             no_warn try_first_pass nullok
+
+# account
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $system .= <<<EOD
+#account sufficient /usr/local/lib/pam_winbind.so
+
+EOD;
+  } 
+
+  $system .= <<<EOD
+account         required        pam_login_access.so
+account         required        pam_unix.so
+
+# session
+session         required        pam_lastlog.so          no_fail
+
+# password
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $system .= <<<EOD
+#password 	sufficient /usr/local/lib/pam_winbind.so	debug try_first_pass
+
+EOD;
+  }
+
+  $system .= <<<EOD
+password        required        pam_unix.so             no_warn try_first_pass
+
+EOD;
+
+  $fd = fopen("{$g['varetc_path']}/pam.d/system", "w");
+
+  if (!$fd) {
+    printf("Error: cannot open /pam.d/system in system_pam_configure().\n");
+    return 1;
+  }
+
+  fwrite($fd, $system);
+  fclose($fd);
+
+  $sshd .= <<<EOD
+# PAM configuration for the "sshd" service
+
+# auth
+auth            required        pam_nologin.so          no_warn
+auth            sufficient      pam_opie.so             no_warn no_fake_prompts
+auth            requisite       pam_opieaccess.so       no_warn allow_local
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $sshd .= <<<EOD
+auth sufficient /usr/local/lib/pam_winbind.so	debug try_first_pass
+
+EOD;
+  }
+
+  $sshd .= <<<EOD
+auth            required        pam_unix.so             no_warn try_first_pass
+
+# account
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $sshd .= <<<EOD
+account			sufficient		/usr/local/lib/pam_winbind.so
+
+EOD;
+  }
+
+  $sshd .= <<<EOD
+account         required        pam_unix.so
+
+# session
+session         required        pam_permit.so
+
+# password
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $sshd .= <<<EOD
+password	sufficient	/usr/local/lib/pam_winbind.so	debug try_first_pass
+
+EOD;
+  }
+
+  $sshd .= <<<EOD
+password        required        pam_unix.so             no_warn try_first_pass
+
+EOD;
+
+  unset($fd);
+  $fd = fopen("{$g['varetc_path']}/pam.d/sshd", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open /pam.d/sshd in system_pam_configure().\n");
+    return 1;
+  }
+
+  fwrite($fd, $sshd);
+  fclose($fd);
+
+  $ftp = <<<EOD
+# PAM configuration for the "ftpd" service
+
+# auth
+auth            required        pam_nologin.so          no_warn
+auth            sufficient      pam_opie.so             no_warn no_fake_prompts
+auth            requisite       pam_opieaccess.so       no_warn allow_local
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $ftp .= <<<EOD
+auth	sufficient	/usr/local/lib/pam_winbind.so	debug try_first_pass
+
+EOD;
+  } 
+
+  $ftp .= <<<EOD
+auth            required        pam_unix.so             no_warn try_first_pass
+
+# account
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $ftp .= <<<EOD
+account		sufficient	/usr/local/lib/pam_winbind.so
+
+EOD;
+  } 
+
+  $ftp .= <<<EOD
+account         required        pam_login_access.so
+account         required        pam_unix.so
+
+# session
+session         required        pam_permit.so
+
+EOD;
+
+  unset($fd);
+  $fd = fopen("{$g['varetc_path']}/pam.d/ftp", "w");
+  
+  if (!$fd) {
+    printf("Error: cannot open /pam.d/ftp in system_pam_configure().\n");
+    return 1;
+  }
+
+  fwrite($fd, $ftp);
+  fclose($fd);
+
+  $login = <<<EOD
+# PAM configuration for the "login" service
+#
+
+# auth
+auth            required        pam_nologin.so          no_warn
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $login .= <<<EOD
+auth	sufficient	/usr/local/lib/pam_winbind.so	debug try_first_pass
+
+EOD;
+  } 
+
+  $login .= <<<EOD
+auth            sufficient      pam_self.so             no_warn
+auth            include         system
+
+# account
+
+EOD;
+
+  if (isset($config['ad']['enable'])) {
+    $login .= <<<EOD
+account		sufficient	/usr/local/lib/pam_winbind.so
+
+EOD;
+  } 
+
+  $login .= <<<EOD
+account         requisite       pam_securetty.so
+account         include         system
+
+# session
+session         include         system
+
+# password
+password        include         system
+
+EOD;
+
+  unset($fd);
+  $fd = fopen("{$g['varetc_path']}/pam.d/login", "w");
+
+  if (!$fd) {
+    printf("Error: cannot open /pam.d/login in system_pam_configure().\n");
+    return 1;
+  }
+
+  fwrite($fd, $login);
+  fclose($fd);
+
+  unset($fd);
+
+  /* Create the nsswitch.conf file*/
+  if (isset($config['ad']['enable'])) {
+    $nsswitch = <<<EOD
+group: files winbind
+group_compat: nis
+hosts: files dns wins
+networks: files
+passwd: files winbind
+passwd_compat: nis
+shells: files
+
+EOD;
+  } else {
+    $nsswitch = <<<EOD
+group: compat
+group_compat: nis
+hosts: files dns
+networks: files
+passwd: compat
+passwd_compat: nis
+shells: files
+
+EOD;
+  } // end if
+  
+  $fd = fopen("{$g['varetc_path']}/nsswitch.conf", "w");
+
+  if (!$fd) {
+    printf("Error: cannot open /var/etc/nsswitch.conf in system_pam_configure().\n");
+    return 1;
+  }
+
+  fwrite($fd, $nsswitch);
+  fclose($fd);
+
+  unset($fd);
+
+  return 0;
+}
+
+function system_tuning() {
+  /* fine tune kernel value */
+  global $config, $g;
+  
+  if (isset($config['system']['tune'])) 	{
+    if ($g['booting']) { echo 'Tuning the system... '; }
+
+    mwexec('/sbin/sysctl net.inet.tcp.delayed_ack=0');
+    mwexec('/sbin/sysctl net.inet.tcp.sendspace=65536');
+    mwexec('/sbin/sysctl net.inet.tcp.recvspace=65536');
+    mwexec('/sbin/sysctl net.inet.udp.recvspace=65536');
+    mwexec('/sbin/sysctl net.inet.udp.maxdgram=57344');
+    mwexec('/sbin/sysctl net.local.stream.recvspace=65535');
+    mwexec('/sbin/sysctl net.local.stream.sendspace=65535');
+    mwexec('/sbin/sysctl kern.ipc.maxsockbuf=2097152');	
+    mwexec('/sbin/sysctl kern.ipc.somaxconn=8192');
+    /* This variable can be set on the boot conf file only: */
+    /* mwexec('/sbin/sysctl kern.ipc.maxsockets=16424'); */
+    mwexec('/sbin/sysctl kern.ipc.nmbclusters=60000');
+    mwexec('/sbin/sysctl kern.maxfiles=65536');
+    mwexec('/sbin/sysctl kern.maxfilesperproc=32768');
+    mwexec('/sbin/sysctl net.inet.tcp.inflight.enable=0');
+
+    if ($g['booting']) { echo "done\n"; }
+    return 0;
+  } else {
+    /* Set the default value (if previously changed) if not booting mode */
+    if (!$g['booting']) {
+      mwexec('/sbin/sysctl net.inet.tcp.delayed_ack=1');
+      mwexec('/sbin/sysctl net.inet.tcp.sendspace=32768');
+      mwexec('/sbin/sysctl net.inet.tcp.recvspace=65536');
+      mwexec('/sbin/sysctl net.inet.udp.recvspace=42080');
+      mwexec('/sbin/sysctl net.inet.udp.maxdgram=9216');
+      mwexec('/sbin/sysctl net.local.stream.recvspace=8192');
+      mwexec('/sbin/sysctl net.local.stream.sendspace=8192');
+      mwexec('/sbin/sysctl kern.ipc.maxsockbuf=262144');	
+      mwexec('/sbin/sysctl kern.ipc.somaxconn=128');
+      /* mwexec('/sbin/sysctl kern.ipc.maxsockets=16424'); */
+      mwexec('/sbin/sysctl kern.ipc.nmbclusters=3072');
+      mwexec('/sbin/sysctl kern.maxfiles=1064');
+      mwexec('/sbin/sysctl kern.maxfilesperproc=957');
+    } // end if
+    
+    return 0;
+  } // end if
+}
+
+/* TODO: Probably a function that is not needed */
+function system_install_mount_cd($cdrom) {
+  /* Part of install process: Mount the CDROM */
+  global $config, $g;
+
+  /* Creating tempo directory for cdrom*/
+  echo "Creating Mount point for the CDROM:\n";
+  if (mwexec("/bin/mkdir /mnt/cdrom_fr_0507")) { return 1; }
+
+  /* Mounting the CDROM */
+  echo "Mount CDROM:\n";
+  if (mwexec("/sbin/mount_cd9660 /dev/$cdrom /mnt/cdrom_fr_0507")) { return 1; }
+
+  return 0;
+}
+
+/* TODO: Probably a function that is not needed */
+function system_install_init_fulldisk($harddrive) {
+  /* Part of install process: Initialize the destination disk with one partition */
+  global $config, $g;
+
+  echo "Erasing partitions:\n";
+  if (mwexec("/bin/dd if=/dev/zero of=/dev/$harddrive bs=1k count=20")) { return 1; }
+
+  echo "Creating the primary partition and install simple MBR:\n";
+  if (mwexec("/sbin/fdisk -BI -b /boot/mbr $harddrive")) { return 1; }
+
+  /* Must wait that the /dev is upatded with the new information */
+  /* There should be a more intelligent code here than this stupid timer... */
+  echo "Waiting for system update..";
+  $devtotest="/dev/$harddrive". "s1";
+  $i=0;
+
+  while (!file_exists($devtotest)) 	{
+    sleep(1);
+    echo ".";
+    $i++;
+    
+    if ($i==20) { return 1; }
+  }
+  echo "\n";
+
+  echo "Erasing primary partition:\n";
+  if (mwexec("/bin/dd if=/dev/zero of=/dev/" . escapeshellarg($harddrive) . "s1 bs=32k count=16")) {
+    return 1;
+  }
+
+  echo "Creating FreeBSD partition:\n";
+  if (mwexec("/sbin/bsdlabel -B -w -b /boot/boot " . escapeshellarg($harddrive) ."s1 auto")) {
+    return 1;
+  }
+
+  echo "Setting BSDlabel:\n";
+
+  disks_bsdlabel($harddrive,"s1","4.2BSD");
+
+  echo "Creating UFS filesystem:\n";
+  if (mwexec("/sbin/newfs -U /dev/" . escapeshellarg($harddrive) . "s1")) { return 1; }
+
+  return 0;
+}
+
+/* TODO: Probably a function that is not needed */
+function system_install_init_halfdisk($harddrive) {
+  /* Part of install process: Initialize the destination disk with 2 partitions */
+  global $config, $g;
+
+  /* Create the partitions */
+  fdisk_hd_install($harddrive);
+
+  if (mwexec("(/bin/echo y; /bin/echo y) | /sbin/fdisk -B -b /boot/mbr $harddrive")) { return 0; }
+
+  /* Must wait that the /dev is upatded with the new information */
+  echo "Waiting for system update..";
+
+  $devtotest="/dev/$harddrive". "s2";
+  $i=0;
+  while (!file_exists($devtotest)) {
+    sleep(1);
+    echo ".";
+    $i++;
+
+    if ($i==20) { return 1; }
+  }
+  echo "\n";
+
+  echo "Creating BSD Label:\n";
+  if (mwexec("/sbin/bsdlabel -B -w -b /boot/boot " . escapeshellarg($harddrive) ."s1 auto")) {
+    return 1;
+  }
+  if (mwexec("/sbin/bsdlabel -w " . escapeshellarg($harddrive) ."s2 auto")) {
+    return 1;
+  }
+
+  echo "Modify BSD Label information:\n";
+
+  disks_bsdlabel($harddrive,"s1","4.2BSD");
+  disks_bsdlabel($harddrive,"s2","4.2BSD");
+
+  echo "Creating filesystem:\n";
+  if (mwexec("/sbin/newfs -U /dev/" . escapeshellarg($harddrive) . "s1")) {
+    return 1;
+  }
+  if (mwexec("/sbin/newfs -U /dev/" . escapeshellarg($harddrive) . "s2")) {
+    return 1;
+  }
+
+  return 0;
+}
+
+/* TODO: Probably a function that is not needed */
+function system_install_mount_destdisk($harddrive) {
+  /* Part of install process: Mount the destination disk */
+  global $config, $g;
+
+  echo "Creation tempory mouting point:\n";
+  if (mwexec("/bin/mkdir /mnt/install_fr_0507")) { return 1; }
+
+  echo "Mount destination disk:\n";
+  if (mwexec("/sbin/mount /dev/" . escapeshellarg($harddrive) . "s1 /mnt/install_fr_0507")) {
+    return 1;
+  }
+
+  return 0;
+}
+
+/* TODO: Probably a function that is not needed */
+function system_install_unmount() {
+  /* Part of install process: Unmounting the disk */
+  global $config, $g;
+
+  /* Unmounting disk */
+  if (mwexec("/sbin/umount /mnt/install_fr_0507")) { return 1; }
+  if (mwexec("/sbin/umount /mnt/cdrom_fr_0507")) { return 1; }
+  
+  /* using 'rm -rf' for deleting the temp directory is too dangerous here...  */
+  /*
+  if (mwexec("/bin/rm -rf /mnt/cdrom_fr_0507")) { return 1; }
+  if (mwexec("/bin/rm -rf /mnt/install_fr_0507")) { return 1; }
+ */
+  
+  /* Test: replace with PHP function rmdir */
+  @rmdir ("/mnt/cdrom_fr_0507");
+  @rmdir ("/mnt/install_fr_0507");
+
+  return 0;
+}
+
+/* TODO: Probably a function that is not needed */
+function system_install_installation($harddrive) {
+  /* Part of install process: dd image file on the destination disk */
+  global $config, $g;
+
+  echo "Installation:\n";
+  if (mwexec("/usr/bin/gunzip -S \"\" -c /mnt/cdrom_fr_0507/FreeNAS-generic-pc.gz | dd of=/dev/" . escapeshellarg($harddrive) . " bs=16k > /dev/null 2>&1")) {
+    return 1;
+  }
+
+  return 0;
+}
+
+?>
\ No newline at end of file
diff --git a/config/archive/freenas/pkg/freenas_utils.inc b/config/archive/freenas/pkg/freenas_utils.inc
new file mode 100644
index 00000000..6e5d8872
--- /dev/null
+++ b/config/archive/freenas/pkg/freenas_utils.inc
@@ -0,0 +1,1049 @@
+<?php
+/* $Id$ */
+/* ========================================================================== */
+/*
+    freenas_utils.inc
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt <me@daniel.stefan.haischt.name>
+    All rights reserved.
+
+    Based on FreeNAS (http://www.freenas.org)
+    Copyright (C) 2005-2006 Olivier Cochard-Labbé <olivier@freenas.org>.
+    All rights reserved.
+
+    Based on m0n0wall (http://m0n0.ch/wall)
+    Copyright (C) 2003-2006 Manuel Kasper <mk@neon1.net>.
+    All rights reserved.
+                                                                              */
+/* ========================================================================== */
+/*
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+     1. Redistributions of source code must retain the above copyright notice,
+        this list of conditions and the following disclaimer.
+
+     2. Redistributions in binary form must reproduce the above copyright
+        notice, this list of conditions and the following disclaimer in the
+        documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+/* returns true if $desc is a valid description (alphanum and space, _ , - , .)*/
+function is_validdesc($desc) {
+  if (!is_string($desc)) { return false; }
+
+  if (preg_match("/^[A-Za-z0-9]([A-Za-z0-9_\-\.\s]*[A-Za-z0-9])*$/", $desc)) {
+    return true;
+  } else {
+    return false;
+  }
+}
+
+/* returns true if $login is a valid login name (alphanum,dot, _ , -)*/
+function is_validlogin($login) {
+  if (!is_string($login)) { return false; }
+
+  if (preg_match("/^[A-Za-z0-9]([A-Za-z0-9_\-\.\s]*[A-Za-z0-9])*$/", $login)) {
+    return true;
+  } else {
+    return false;
+  }
+}
+
+/* returns true if $password is a valid password (not used of special : character)*/
+function is_validpassword($password) {
+  if (!is_string($password)) { return false; }
+
+  if (strstr($password, ':')) {
+    return false;
+  } else {
+    return true;
+  }
+}
+
+/* returns true if $login is a valid share name (alphanum,dot, _ , -)*/
+function is_validsharename($sharename) {
+  if (!is_string($sharename)) { return false; }
+
+  if (preg_match("/^[A-Za-z0-9]([A-Za-z0-9_\-\.\s]*[A-Za-z0-9])*$/", $sharename)){ 
+    return true;
+  } else {
+    return false;
+  }
+}
+
+/* Returns true if $workgroup is a valid workgroup name */
+/* A workgroup name can contain up to 15 characters, including letters, numbers, */
+/* and the following characters: ! @ # $ % ^ & ( ) _ - ; : ' " , . */
+/* It cannot contain any spaces, and must begin with a letter or number. */
+function is_workgroup($workgroup) {
+  if (!is_string($workgroup)) { return false; }
+
+  if (preg_match("/^[\w\d]+[\w\d\!\@\#\$\%\^\&\(\)\_\-\;\:\'\"\,\.]*$/", $workgroup)) {
+    return true;
+  } else {
+    return false;
+  }
+}
+
+function get_mounts_list()
+{
+  // Return list of mounted disk
+  //example: Array
+  //  [0] => Array
+  //      (
+  //        [mp] => /mnt/ad0s1
+  //        [mdisk] => ad0s1
+  //      )
+  global $g;
+
+  exec("/sbin/mount",$rawdata);
+
+  $mountlist = array();
+  $i=0;
+
+  foreach ($rawdata as $line) {
+    $aline = explode(" ", $line);
+
+    if ((chop($aline[0]) == "/dev/md0") || (chop($aline[0]) == "devfs") || (chop($aline[0]) == "/dev/fd0")) {
+      continue;
+    }
+  
+    $mountlist[$i]['fullname'] = chop($aline[0]);
+    $mountlist[$i]['mp'] = chop($aline[2]);
+  
+    // Get the complete name /dev/devicename
+    $complete = explode("/",chop($aline[0]));
+    $devname = $complete[2];
+
+    // Test if it's a gvinum or gmirror device
+    if ((strcmp($devname,"gvinum") == 0) || (strcmp($devname,"mirror") == 0)) {
+      $devname = $complete[3];
+    }
+
+    $mountlist[$i]['mdisk']=$devname;
+    $i++;
+  } // end foreach
+
+  return $mountlist;
+}
+
+function get_mount_use() {
+  // Return list of mounted use
+  // example: Array
+  //  [mount_point_name] => Array
+  //      (
+  //        [capacity] => 48%
+  //        [used] => 2.4G
+  //        [avail] => 2.6G
+  //        [size] => 5.4G
+  //      )
+  global $freenas_config, $g;
+
+  exec("/bin/df -h",$rawdata);
+
+  $result = array();
+
+  foreach ($rawdata as $line) {
+    /* separe the line by space*/
+    $aline = preg_split("/[\s,]+/", $line);
+    $tmp = explode("/",chop($aline[5]));
+    $mounted_on = $tmp[2];
+    $capacity = chop($aline[4]);
+    $avail = chop($aline[3]);
+    $used = chop($aline[2]);
+    $size = chop($aline[1]);
+
+    if (is_array($freenas_config['mounts']['mount'])) {
+      foreach ($freenas_config['mounts']['mount'] as $mountcfg) {
+        if (strcmp($mounted_on,$mountcfg['sharename']) == 0) {
+          $result[$mounted_on] = array();
+          $result[$mounted_on]['capacity'] = $capacity;
+          $result[$mounted_on]['avail'] = $avail;
+          $result[$mounted_on]['used'] = $used;
+          $result[$mounted_on]['size'] = $size;
+        }
+      } // end foreach
+    } else {
+      return 0;
+    } // end if
+  } // end foreach
+  
+  //print_r($result);
+
+  return $result;
+}
+
+function get_sraid_disks_list() {
+  /* Return list of ALL software volume: gvinum, gmirror */
+  $disklist = array_merge((array)get_gvinum_disks_list(),(array)get_gmirror_disks_list(),(array)get_gconcat_disks_list(),(array)get_gstripe_disks_list(),(array)get_graid5_disks_list());
+  return $disklist;
+}
+
+function get_gvinum_disks_list() {
+  /* Get information about gvinum volume */
+  global $g;
+
+  /* Return list of Software RAID disk */
+    //[volumename] => Array
+    //    (
+    //        [type] => Software RAID - gvinum
+    //        [desc] => UP
+    //        [size] => 6149 MB
+    //    )
+
+  /* on envoie la commande d'affichage de la liste des volumes*/
+  exec("/sbin/gvinum list",$rawdata);
+
+  foreach ($rawdata as $line) {
+    /* Split the line using the space as separator */
+    $aline = preg_split("/\s+/", $line);
+
+    /* Get the line that begin with the letter  'V' */
+    if ($aline[0] != "V") { continue ; }
+
+    $diskname = chop($aline[1]);
+    $disklist[$diskname] = array();
+    
+    $disklist[$diskname]['name'] = $diskname;
+    $disklist[$diskname]['fullname'] = "/dev/gvinum/" . $diskname;
+    $disklist[$diskname]['type'] = "Software RAID - gvinum";
+    $disklist[$diskname]['size'] = "$aline[7] $aline[8]" ;
+    $disklist[$diskname]['desc'] = $aline[3];
+  } // end foreach
+
+  return $disklist;
+}
+
+function get_gmirror_disks_list() {
+  /* Get information about gmirror volume */
+  global $g;
+
+  //[volumename] => Array
+  //    (
+  //        [type] => Software RAID - gmirror
+  //        [desc] => COMPLETE
+  //        [size] => 6149M
+  //    )
+
+  /* Display all configured gmirror volume */
+  exec("/sbin/gmirror list", $rawdata);
+
+  $foundname = 0 ;
+  $founddesc = 0 ;
+  $goodname = 0 ;
+
+  foreach ($rawdata as $line) {
+    /* Use space for break the line */
+    $aline = preg_split("/\s+/", $line);
+
+    // First Step: Getting the array name
+    // look for this output:
+    // Geom name: pouet
+    if ( (strcmp($aline[0],"Geom") == 0) && (strcmp($aline[1],"name:") == 0) ) {
+      $diskname = $aline[2];
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/mirror/" . $diskname;
+      $foundname = 1 ;
+      continue ;
+    }
+
+    // Second Step: Getting the array status
+    // look for this output:
+    // State: COMPLETE
+    if ( (strcmp($aline[0],"State:") == 0) && $foundname) {
+      $desc = $aline[1];
+      $disklist[$diskname]['desc'] = $desc;
+      $founddesc=1;
+      continue ;
+    }
+
+    // Third Step: Getting the array Size
+    // look for this output:
+    // Name: mirror/pouet
+    // Mediasize: 107373568 (102M)
+    if (preg_match("/Name: mirror\/(.*)$/", $line, $matches)) {
+      if ($matches[1]=$diskname) {
+        $goodname=1;
+        continue ;
+      }
+    }
+
+    if (($aline[0] = "Mediasize:") && $goodname) {
+      // extract the size between the ( )
+      preg_match("/.*\\(([^\)]*)\).*/",$aline[3],$match);
+      $disklist[$diskname]['size'] = $match[1];
+      $disklist[$diskname]['type'] = "Software RAID - gmirror";
+
+      // init the check variable for the next RAID volume
+      $foundname = 0 ;
+      $founddesc = 0 ;
+      $goodname = 0 ;
+      
+      continue ;
+      
+    }
+  } // end foreach
+
+  return $disklist;
+}
+
+function get_gconcat_disks_list() {
+  /* Get information about gconcat volume */
+  global $g;
+
+  //[volumename] => Array
+  //    (
+  //      [type] => Software RAID - gconcat
+  //      [desc] => COMPLETE
+  //      [size] => 6149M
+  //      [name] => concat1
+  //      [fullname] => /dev/concat/concat1
+  //    )
+
+  /* Display all configured gconcat volume*/
+  exec("/sbin/gconcat list",$rawdata);
+
+  $foundname = 0 ;
+  $founddesc = 0 ;
+  $goodname = 0 ;
+
+  foreach ($rawdata as $line) {
+    /* Use space for break the line */
+    $aline = preg_split("/\s+/", $line);
+    
+    // First Step: Getting the array name
+    // look for this output:
+    // Geom name: pouet
+    if ( (strcmp($aline[0],"Geom") == 0) && (strcmp($aline[1],"name:") == 0) ) {
+      $diskname = $aline[2];
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/concat/" . $diskname;
+      $foundname = 1 ;
+      continue ;
+    }
+    
+    // Second Step: Getting the array status
+    // look for this output:
+    // State: UP
+    if ( (strcmp($aline[0],"State:") == 0) && $foundname) {
+    
+      $desc = $aline[1];
+      $disklist[$diskname]['desc'] = $desc;
+      $founddesc=1;
+      continue ;
+    }
+    
+    // Third Step: Getting the array Size
+    // look for this output:
+    // Name: concat/pouet
+    // Mediasize: 107373568 (102M)
+    if (preg_match("/Name: concat\/(.*)$/", $line, $matches)) {
+      if ($matches[1]=$diskname) {
+        $goodname=1;
+        continue ;
+      }
+    
+    }
+    
+    if (($aline[0] = "Mediasize:") && $goodname) {
+      // extract the size between the ( )
+      preg_match("/.*\\(([^\)]*)\).*/",$aline[3],$match);
+      $disklist[$diskname]['size'] = $match[1];
+      $disklist[$diskname]['type'] = "Software RAID - gconcat";
+      
+      // init the check variable for the next RAID volume
+      $foundname = 0 ;
+      $founddesc = 0 ;
+      $goodname = 0 ;
+      
+      continue ;
+    }
+  }
+  
+  return $disklist;
+}
+
+function get_gstripe_disks_list() {
+  /* Get information about gstripe volume */
+  global $g;
+
+  //[volumename] => Array
+  //    (
+  //      [type] => Software RAID - gstripe
+  //      [desc] => COMPLETE
+  //      [size] => 6149M
+  //      [name] => raid0
+  //      [fullname] => /dev/stripe/raid0
+  //    )
+
+  /* Display all configured gstripe volume*/
+  exec("/sbin/gstripe list",$rawdata);
+
+  $foundname = 0 ;
+  $founddesc = 0 ;
+  $goodname = 0 ;
+  
+  foreach ($rawdata as $line) {
+    /* Use space for break the line */
+    $aline = preg_split("/\s+/", $line);
+    
+    // First Step: Getting the array name
+    // look for this output:
+    // Geom name: pouet
+    if ( (strcmp($aline[0],"Geom") == 0) && (strcmp($aline[1],"name:") == 0) ) {
+      $diskname = $aline[2];
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/stripe/" . $diskname;
+      $foundname = 1 ;
+      continue ;
+    }
+    
+    // Second Step: Getting the array status
+    // look for this output:
+    // State: UP
+    if ( (strcmp($aline[0],"State:") == 0) && $foundname) {
+      $desc = $aline[1];
+      $disklist[$diskname]['desc'] = $desc;
+      $founddesc=1;
+      continue ;
+    }
+    
+    // Third Step: Getting the array Size
+    // look for this output:
+    // Name: stripe/pouet
+    // Mediasize: 107373568 (102M)
+    if (preg_match("/Name: stripe\/(.*)$/", $line, $matches)) {
+      if ($matches[1]=$diskname) {
+        $goodname=1;
+        continue ;
+      }
+    
+    }
+    
+    if (($aline[0] = "Mediasize:") && $goodname) {
+      // extract the size between the ( )
+      preg_match("/.*\\(([^\)]*)\).*/",$aline[3],$match);
+      $disklist[$diskname]['size'] = $match[1];
+      $disklist[$diskname]['type'] = "Software RAID - gstripe";
+      
+      // init the check variable for the next RAID volume
+      $foundname = 0 ;
+      $founddesc = 0 ;
+      $goodname = 0 ;
+      
+      continue ;
+      
+    }
+  }
+  
+  return $disklist;
+}
+
+function get_graid5_disks_list() {
+  /* Get information about graid5 volume */
+  global $g;
+
+  //[volumename] => Array
+  //    (
+  //      [type] => Software RAID - graid5
+  //      [desc] => COMPLETE
+  //      [size] => 6149M
+  //      [name] => BIG1
+  //      [fullname] => /dev/raid5/BIG1
+  //    )
+
+  /* Display all configured graid5 volume*/
+  exec("/sbin/graid5 list",$rawdata);
+  
+  $foundname = 0 ;
+  $founddesc = 0 ;
+  $goodname = 0 ;
+  
+  foreach ($rawdata as $line) {
+    /* Use space for break the line */
+    $aline = preg_split("/\s+/", $line);
+    
+    // First Step: Getting the array name
+    // look for this output:
+    // Geom name: pouet
+    if ( (strcmp($aline[0],"Geom") == 0) && (strcmp($aline[1],"name:") == 0) ) {
+      $diskname = $aline[2];
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/raid5/" . $diskname;
+      $foundname = 1 ;
+      continue ;
+    }
+    
+    // Second Step: Getting the array status
+    // look for this output:
+    // State: COMPLETE
+    if ( (strcmp($aline[0],"State:") == 0) && $foundname) {
+      $desc = $aline[1];
+      $disklist[$diskname]['desc'] = $desc;
+      $founddesc=1;
+      continue ;
+    }
+    
+    // Third Step: Getting the array Size
+    // look for this output:
+    // Name: raid5/pouet
+    // Mediasize: 107373568 (102M)
+    if (preg_match("/Name: raid5\/(.*)$/", $line, $matches)) {
+      if ($matches[1]=$diskname) {
+        $goodname=1;
+        continue ;
+      }
+    }
+    
+    if (($aline[0] = "Mediasize:") && $goodname) {
+      // extract the size between the ( )
+      preg_match("/.*\\(([^\)]*)\).*/",$aline[3],$match);
+      $disklist[$diskname]['size'] = $match[1];
+      $disklist[$diskname]['type'] = "Software RAID - graid5";
+      
+      // init the check variable for the next RAID volume
+      $foundname = 0 ;
+      $founddesc = 0 ;
+      $goodname = 0 ;
+      
+      continue ;
+    }
+  }
+  
+  return $disklist;
+}
+
+function get_ata_disks_list() {
+  /* Return list of ATA disk */
+
+  //[ad0] => Array
+  //    (
+  //        [type] => IDE
+  //        [desc] => QUANTUM FIREBALL EX6.4A/A0A.0D00
+  //        [size] => 6149MB
+  //    )
+
+  global $g;
+
+  /* Recupere le dmesg */
+  exec("/sbin/dmesg",$rawdmesg);
+
+  $disklist = array();
+
+  /******* Getting IDE disk informations *******/
+  exec("/sbin/atacontrol list",$rawdata);
+
+  foreach ($rawdata as $line) {
+    /* Separe la ligne par les espace */
+    $aline = preg_split("/\s+/", $line);
+  
+    /* Si ATA alors NEXT */
+    if ($aline[0] == "ATA") { continue ; }
+  
+    $diskname = chop($aline[2]);
+    
+    /* Exlude CDROM (acdX) and Empty (no) */
+    if (!preg_match("/^(acd)/", $diskname ) & $diskname != "no") {
+      $disklist[$diskname] = array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/" . $diskname;
+
+      $disklist[$diskname]['type'] = "IDE";
+    
+      /* Match the description witch is include between < and > */
+      preg_match("/.*\<([^>]*)>.*/",$line,$match);
+    
+      $disklist[$diskname]['desc'] = $match[1];
+      
+      /* Looking for the disk size */
+      foreach ($rawdmesg as $dmesgline) {
+        /* Take only the first dmesg line */
+        if (!$disklist[$diskname]['size']) {
+          /* Separe la ligne par les espace */
+          $dmesgtab = explode(" ", $dmesgline);
+          $dmesgtab[0] = rtrim($dmesgtab[0],":");
+          /* When there is a wrong DMA cable, the first line is:
+           * ad0: DMA limited to UDMA33, controller found non-ATA66 cable
+          */
+          if ($dmesgtab[0]!="" && (strcasecmp($dmesgtab[0],$diskname) == 0) &&
+              strcmp($dmesgtab[1],"DMA") !=0) {
+            $disklist[$diskname]['size'] = $dmesgtab[1];
+          }
+        } // end if
+      } // end foreach
+    } // end if
+  } // end foreach
+  
+  return $disklist;
+}
+
+function get_scsi_disks_list() {
+  /* Recupere la liste des disques SCSI */
+  
+  //[ad0] => Array
+  //    (
+  //        [type] => IDE
+  //        [desc] => QUANTUM FIREBALL EX6.4A/A0A.0D00
+  //        [size] => 6149MB
+  //    )
+  
+  global $g;
+    
+  /* Recupere le dmesg */
+  exec("/sbin/dmesg",$rawdmesg);
+  
+  /* on envoie la commande d'affichage de la liste des disques*/
+  exec("/sbin/camcontrol devlist",$rawdata);
+    
+  foreach ($rawdata as $line) {
+    /* Get information include between parenthese: (pass0,da0) or (da0,pass0)*/
+    preg_match("/.*\(([^>]*)\).*/",$line,$match);
+
+    /* Sépare le resultat par la virgule  */
+    $temp = preg_split("/,/", $match[1]);
+
+    // Check if diskname is the first (da0,pass0) or the second (pass0,da0) arguement
+    $diskname = $temp[1];
+    
+    if ($diskname[0] == "p") { $diskname = $temp[0]; }
+    
+    /* On exlus les lecteurs cd */
+    if (!preg_match("/^(cd)/", $diskname  )) {
+      $disklist[$diskname] = array();
+      $disklist[$diskname]['name'] = $diskname;
+      $disklist[$diskname]['fullname'] = "/dev/" . $diskname;
+      $disklist[$diskname]['type'] = "SCSI";
+      /* Recupère la description: ce qu'il y a entre < et > */
+    
+      preg_match("/.*\<([^>]*)>.*/",$line,$match);
+    
+      $disklist[$diskname]['desc'] = $match[1];
+  
+      /* Looking for the disk size */
+      foreach ($rawdmesg as $dmesgline) {
+        /* Separe la ligne par les espace */
+        $dmesgtab = explode(" ", $dmesgline);
+        $dmesgtab[0] = rtrim($dmesgtab[0],":");
+        if ($dmesgtab[0]!="" &&(strcasecmp($dmesgtab[0],$diskname) == 0)) {
+          $disklist[$diskname]['size'] = $dmesgtab[1];
+        }
+      } // end foreach
+    } // end if
+  } // end foreach
+  
+  return $disklist;
+}
+
+function get_hraid_disks_list() {
+  /* Recupere la liste des disques RAID */
+  $kerneldisks = explode(" ", trim(preg_replace("/kern.disks: /", "", exec("/sbin/sysctl kern.disks"))));
+  
+  /* Recupere la liste des disques ATA et SCSI */
+  $diskdetected = array_merge((array)get_ata_disks_list(),(array)get_scsi_disks_list());
+  
+  /* Recupere le dmesg */
+  exec("/sbin/dmesg",$rawdmesg);
+  
+  foreach ($kerneldisks as $diskname) {
+    $allready=1;
+    
+    // Check of this entry is IDE or SCSI (allready detected)
+    foreach ($diskdetected as $diskfoundk => $diskfoundv) {
+      if (strcasecmp($diskfoundk,$diskname) == 0) {
+        $allready = 0;
+      }
+    }
+
+    if ($allready) {
+      /* If not an IDE and SCSI disk */
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/" . $diskname;
+
+      $disklist[$diskname]['type'] = "RAID";
+
+      /* Looking for the disk size in the dmesg */
+      foreach ($rawdmesg as $dmesgline) {
+        /* Separe la ligne par les espace */
+        $dmesgtab = explode(" ", $dmesgline);
+        $dmesgtab[0] = rtrim($dmesgtab[0],":");
+        // si la ligne commence par le nom du disque: attention il y a 2 lignes
+        if ($dmesgtab[0]!="" &&(strcasecmp($dmesgtab[0],$diskname) == 0)) {
+          // the first line as this example "aacd0: <RAID 5> on aac0"
+          if (strcasecmp(substr($dmesgtab[1], 0, 1),"<") == 0) {
+            /* Match the description witch is include between < and > */
+            preg_match("/.*\<([^>]*)>.*/",$dmesgline,$match);
+            $disklist[$diskname]['desc'] = $match[1];
+          } else{
+            // si c'est la deuxieme ligne, elle ressemble a "aacd0: 138850MB (284365824 sectors)"
+            $disklist[$diskname]['size'] = $dmesgtab[1];
+          } // end if
+        } // end if
+      } // end foreach
+    } // end if
+  } // end foreach
+
+  return $disklist;
+}
+
+function get_physical_disks_list() {
+  /* Return list of ALL disk: physical, hardware RAID and Software RAID disk */
+  $disklist = array_merge((array)get_ata_disks_list(),(array)get_scsi_disks_list(),(array)get_hraid_disks_list());
+  return $disklist;
+}
+
+function get_all_disks_list() {
+  /* Return list of ALL disk: physical, hardware RAID and Software RAID disk */
+  $disklist = array_merge((array)get_ata_disks_list(),(array)get_scsi_disks_list(),(array)get_hraid_disks_list(), (array)get_sraid_disks_list());
+  return $disklist;
+}
+
+function get_disks_size($diskname) {
+  /* Return size of the disk */
+  $disklist=get_physical_disks_list();
+  $disksize=0;
+  
+  foreach ($disklist as $diskk => $diskv) {
+    if (strcmp($diskk,$diskname)==0) {
+      $disksize=$diskv['size'];
+    }
+  }
+  
+  return $disksize;
+}
+    
+function get_cdrom_list() {
+  /* Return list of IDE AND SCSI CDROM */
+  // exemple: Array
+  // [acd0] => Array
+  //    (
+  //        [type] => IDE
+  //        [desc] => TDK CDRW241040B/57S2
+  //    )
+  
+  global $g;
+  
+  /* Recupere la liste des disques IDE */
+  exec("/sbin/atacontrol list",$rawdata);
+  
+  /* Recupere le dmesg */
+  exec("/sbin/dmesg",$rawdmesg);
+      
+  $disklist = array();
+  
+  /* Variable $i utilisé pour l'index du tableau */
+  $i=0;
+  foreach ($rawdata as $line) {
+    /* Separe la ligne par les espace */
+    $aline = preg_split("/\s+/", $line);
+  
+    /* Si ATA alors NEXT */
+    if ($aline[0] == "ATA") { continue ; }
+  
+    $diskname = chop($aline[2]);
+    
+    /* Exlude disk (adX) and Empty (no) */
+    if (!preg_match("/^(ad)/", $diskname ) & $diskname != "no") {
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/" . $diskname;
+      
+      $disklist[$diskname]['type'] = "IDE";
+    
+      /* Match the description witch is include between < and > */
+      preg_match("/.*\<([^>]*)>.*/",$line,$match);
+    
+      $disklist[$diskname]['desc'] = $match[1];
+      
+      $i++;
+    } // end if
+  } // end foreach
+  
+  /* Get the SCSI disk list */
+  
+  /* Cleaning used variable and initialize array */
+  unset($rawdata);
+  unset($dmesgtab);
+  reset($rawdmesg);
+  
+  /* Get the result of the command camcontrol*/
+  exec("/sbin/camcontrol devlist",$rawdata);
+
+  foreach ($rawdata as $line) {
+    /* Get information include between parenthese: (pass0,da0) or (da0,pass0)*/
+    preg_match("/.*\(([^>]*)\).*/",$line,$match);
+
+    /* Sépare le resultat par la virgule  */
+    $temp = preg_split("/,/", $match[1]);
+    
+    // Check if diskname is the first (da0,pass0) or the second (pass0,da0) arguement
+    $diskname = $temp[1];
+    if ($diskname[0] == "p") { $diskname = $temp[0]; }
+    
+    /* On exlus les lecteurs disque dur da */
+    if (!preg_match("/^(da)/", $diskname  )) {
+      $disklist[$diskname]=array();
+      $disklist[$diskname]['name']=$diskname;
+      $disklist[$diskname]['fullname']= "/dev/" . $diskname;
+      $disklist[$diskname]['type'] = "SCSI";
+      
+      /* Recupère la description: ce qu'il y a entre < et > */
+      preg_match("/.*\<([^>]*)>.*/",$line,$match);
+    
+      $disklist[$diskname]['desc'] = $match[1];
+      
+      $i++;
+    } // end if
+  } // end foreach
+  
+  return $disklist;
+}
+
+/* Get list of disks from given type of filesystem. */
+function get_fstype_disks_list($fstype) {
+  global $freenas_config;
+  
+  $result = array();
+  
+  /* Scan all physical disk */
+  if (is_array($freenas_config['disks']['disk'])) {
+    foreach ($freenas_config['disks']['disk'] as $disk) {
+      if (strcmp($disk['fstype'],$fstype) == 0) {
+        $result[] = $disk;
+      }
+    } // end foreach
+  } // end if
+  
+  /* Scan all gmirror volume */
+  if (is_array($freenas_config['gmirror']['vdisk'])) {
+    foreach ($freenas_config['gmirror']['vdisk'] as $disk) {
+      if (strcmp($disk['fstype'],$fstype) == 0) {
+        $result[] = $disk;
+      }
+    } // end foreach
+  } // end if
+  
+  /* Scan all gconcat volume */
+  if (is_array($freenas_config['gconcat']['vdisk'])) {
+    foreach ($freenas_config['gconcat']['vdisk'] as $disk) {
+      if (strcmp($disk['fstype'],$fstype) == 0) {
+        $result[] = $disk;
+      }
+    } // end foreach
+  } // end if
+  
+  /* Scan all gstripe volume */
+  if (is_array($freenas_config['gstripe']['vdisk'])) {
+    foreach ($freenas_config['gstripe']['vdisk'] as $disk) {
+      if (strcmp($disk['fstype'],$fstype) == 0) {
+        $result[] = $disk;
+      }
+    } // end foreach
+  } // end if
+  
+  /* Scan all gvinum volume */
+  if (is_array($freenas_config['gvinum']['vdisk'])) {
+    foreach ($freenas_config['gvinum']['vdisk'] as $disk) {
+      if (strcmp($disk['fstype'],$fstype) == 0) {
+        $result[] = $disk;
+      }
+    } // end foreach
+  } // end if
+  
+  /* Scan all graid5 volume */
+  if (is_array($freenas_config['graid5']['vdisk'])) {
+    foreach ($freenas_config['graid5']['vdisk'] as $disk) {
+      if (strcmp($disk['fstype'],$fstype) == 0) {
+        $result[] = $disk;
+      }
+    } // end foreach
+  } // end if
+  
+  return $result;
+}
+
+/* Get list of supported filesystem types */
+function get_fstype_list() {
+  $fstlist = array(
+    ""=>"Unformated",
+    "ufs"=>"UFS with Soft Updates (use 8% space disk)",
+    "ufs_no_su"=>"UFS",
+    "ufsgpt"=>"UFS (EFI/GPT) with Soft Updates (use 8% space disk)",
+    "ufsgpt_no_su"=>"UFS (EFI/GPT)",
+    "msdos"=>"FAT32",
+    "ntfs"=>"NTFS",
+    "softraid"=>"Software RAID");
+/*
+    "gmirror"=>"Software RAID: gmirror",
+    "gconcat"=>"Software RAID: gconcat",
+    "gstripe"=>"Software RAID: gstripe",
+    "graid5"=>"Software RAID: graid5",
+    "gvinum"=>"Software RAID: gvinum");
+*/
+  return $fstlist;
+}
+
+function get_fstype_shortdesc($fstype) {
+  $shortdesc = "";
+
+  switch($fstype) {
+    case "":              $shortdesc = "Unformated";
+                          break;
+    case "ufs":
+    case "ufs_no_su":
+    case "ufsgpt":
+    case "ufsgpt_no_su":  $shortdesc = "UFS";
+                          break;
+    case "msdos":         $shortdesc = "FAT32";
+                          break;
+    case "ntfs":          $shortdesc = "NTFS";
+                          break;
+    case "gmirror":       $shortdesc = "gmirror";
+                          break;
+    case "gconcat":       $shortdesc = "gconcat";
+                          break;
+    case "gstripe":       $shortdesc = "gstripe";
+                          break;
+    case "graid5":        $shortdesc = "graid5";
+                          break;
+    case "gvinum":        $shortdesc = "gvinum";
+                          break;
+    case "softraid":      $shortdesc = "softraid";
+                          break;
+  } // end switch
+  
+  return $shortdesc;
+}
+
+/* Search in a multidimensional array */		
+function array_search_ex($needle, $haystack, $key) {
+  foreach($haystack as $haystackval => $value) {
+    $found = false;
+    
+    if (is_array($needle) && is_array($key)) {
+      foreach ($needle as $n => $needlev) {
+        $found = ($value[$key[$n]] == $needlev);
+        
+        if (false == $found) { break; }
+      }
+    } else {
+      $found = ($value[$key] == $needle);
+    } // end if
+    
+    if (true == $found) { return $haystackval; }
+  } // end foreach
+  
+  return false;
+}
+
+/* TODO: This function is probably not needed. */
+function freenas_install($src,$dst) {
+  // Creating source directory
+  passthru("/bin/mkdir /mnt/src");
+  
+  // Mount the source function is_cdrom must BE CREATED!!!!
+  
+  if (is_cdrom($src)) {
+    echo "Mount CDROM:\n";
+    passthru("/sbin/mount_cd9660 /dev/$src /mnt/src");
+  } else {
+    echo "Mount disk:\n";
+    passthru("/sbin/mount -t ufs /dev/$src /mnt/src");
+  } // end if
+  
+  echo "Erasing primary partitions:\n";
+  passthru("/bin/dd if=/dev/zero of=/dev/$dst bs=1k count=20");
+  
+  echo "Creation 1 booting primary parition:\n";
+  passthru("/sbin/fdisk -BI -b /boot/boot0 $dst");
+  
+  /* echo "Installing bootloader:\n";
+  passthru("/usr/sbin/boot0cfg -B -b /boot/boot0 $dst"); */
+  
+  echo "Erasing FreeBSD partition on the primary:\n";
+  passthru("/bin/dd if=/dev/zero of=/dev/" . escapeshellarg($dst) . "s1 bs=32k count=16");
+  
+  echo "Creating FreeBSD partition:\n";
+  passthru("/sbin/bsdlabel -B -w -b /boot/boot " . escapeshellarg($dst) ."s1 auto");
+  
+  echo "Modify partition information:\n";
+  
+  /* Generation de la table des partitions dans un fichier temp */
+  
+  passthru("/sbin/bsdlabel " . escapeshellarg($dst) ."s1 > label.tmp");
+  
+  /* copie de ce fichier  dans un tableau*/
+  $tableau = file("label.tmp");
+  
+  // Ouverture du fichier en mode ajout
+  $handle = fopen("label.tmp", 'a');
+  
+  while(list(,$val) = each($tableau)) {
+    // Si la ligne contient le mot "unused"
+  
+    if (ereg ("unused",$val)) {
+      // On remplace c: par a:
+      $val = ereg_replace ("c:","a:", $val);
+      // On remplace unused par 4.2BSD
+      $val = ereg_replace ("unused","4.2BSD", $val);
+      // On ajoute cette ligne à la fin du fichier
+      fwrite($handle, $val);
+    } // end if
+  } // end while
+  
+  // Fermeture du fichier
+  fclose($handle);
+  
+  // On injecte la nouvelle table des paritions 
+  passthru("/sbin/bsdlabel -R -B " . escapeshellarg($dst) ."s1 label.tmp");
+  
+  echo "Creating filesystem:\n";
+  passthru("/sbin/newfs /dev/" . escapeshellarg($dst) . "s1");
+  
+  echo "Creation temp mouting point:\n";
+  passthru("/bin/mkdir /mnt/src");
+  
+  echo "Mount disk:\n";
+  passthru("/sbin/mount /dev/" . escapeshellarg($dst) . "s1 /mnt/dst");
+  
+  echo "Installation:\n";
+  
+  passthru("/bin/cp -pr /mnt/src/boot /mnt/dst");
+  passthru("/bin/cp /mnt/src/cf.gz /mnt/dst/mfsroot.gz");
+  
+  if ($src == CDROM) {
+    passthru("/bin/rm -f /mnt/dst/boot/cdloader");
+  }
+  
+  passthru("mkdir /mnt/dst/conf");
+  passthru("/bin/cp /conf/config.xml /mnt/dst/conf/");
+  
+  /* demontage des disques */
+  passthru("/sbin/umount /mnt/dst"); 
+  passthru("/sbin/umount /mnt/src");
+  passthru("/bin/rm -rf /mnt/src");
+  passthru("/bin/rm -rf /mnt/dst");
+}
+
+/* Force kill a process by name */
+function forcekillbyname($procname) {
+  return mwexec("/usr/bin/killall -9 " . escapeshellarg($procname));
+}
+?>
\ No newline at end of file
diff --git a/config/archive/freenas/pkg/rc.freenas b/config/archive/freenas/pkg/rc.freenas
new file mode 100644
index 00000000..3b5c6c0c
--- /dev/null
+++ b/config/archive/freenas/pkg/rc.freenas
@@ -0,0 +1,102 @@
+#!/usr/local/bin/php -f
+<?php
+/* $Id$ */
+/* ========================================================================== */
+    rc.freenas
+    part of pfSense (http://www.pfSense.com)
+    Copyright (C) 2006 Daniel S. Haischt
+    All rights reserved.
+/* ========================================================================== */
+/*
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions are met:
+
+    1. Redistributions of source code must retain the above copyright notice,
+       this list of conditions and the following disclaimer.
+
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+    INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+    AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+    AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+    OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+    SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+    INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+    CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+    ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+    POSSIBILITY OF SUCH DAMAGE.
+                                                                              */
+/* ========================================================================== */
+
+require_once("globals.inc");
+
+/* parse the configuration and include all functions used below */
+require_once("config.inc");
+require_once("functions.inc");
+require_once("freenas_functions.inc");
+
+/* Tune the system */
+system_tuning();
+
+/* Generate local user base */
+system_users_create();
+
+/* start iSCSI service */
+services_iscsi_configure();
+
+/* start the S.M.A.R.T daemon */
+services_smart_configure();
+
+/* ATA disk Idle configuration */
+disks_set_ataidle();
+
+/* RAID configuration */
+disks_raid_start();
+
+/* Mount the disks */
+disks_mount_all();
+
+/* Generate the pam configuration file */
+system_pam_configure();
+
+/* start NIS service */
+services_nis_configure();
+
+/* start SAMBA service */
+services_samba_configure();
+
+/* start Rsynd service */
+services_rsyncd_configure();
+
+/* start FTP service */
+services_ftpd_configure();
+
+/* start NFS service */
+services_nfs_configure();
+
+/* configure Unison service */
+services_unison_configure();
+
+/* start SSH service */
+/* services_sshd_configure(); */
+
+/* start AFP service */
+services_afpd_configure();
+
+/* start RSYNC client/slave mode service */
+services_rsyncclient_configure();
+
+/* start RSYNC local service */
+services_rsync_local_configure();
+
+/* Start cron */
+services_cron_configure();
+
+/* Start mdnsresponder (Zeroconf/Bonjour) */
+services_zeroconf_configure();
+
+?>
\ No newline at end of file