diff options
author | Chris Buechler <cmb@pfsense.org> | 2011-01-23 01:18:32 -0500 |
---|---|---|
committer | Chris Buechler <cmb@pfsense.org> | 2011-01-23 01:18:32 -0500 |
commit | f3ea1f4ba66fe80a435b8224a8eb15e3c732e04b (patch) | |
tree | 964bf133a45b1454ace903dfc51d16ec5064f7e9 /config/archive/freenas/conf.kernel/pfSense.6.freenas | |
parent | 0c725caaa2a1089c47ea0b50ecb8f30e23bf3ccc (diff) | |
download | pfsense-packages-f3ea1f4ba66fe80a435b8224a8eb15e3c732e04b.tar.gz pfsense-packages-f3ea1f4ba66fe80a435b8224a8eb15e3c732e04b.tar.bz2 pfsense-packages-f3ea1f4ba66fe80a435b8224a8eb15e3c732e04b.zip |
move dead packages into archive to clean this up a bit. I know there are some I missed if someone else would like to review
Diffstat (limited to 'config/archive/freenas/conf.kernel/pfSense.6.freenas')
-rw-r--r-- | config/archive/freenas/conf.kernel/pfSense.6.freenas | 433 |
1 files changed, 433 insertions, 0 deletions
diff --git a/config/archive/freenas/conf.kernel/pfSense.6.freenas b/config/archive/freenas/conf.kernel/pfSense.6.freenas new file mode 100644 index 00000000..aee11302 --- /dev/null +++ b/config/archive/freenas/conf.kernel/pfSense.6.freenas @@ -0,0 +1,433 @@ +# +# GENERIC -- Generic kernel configuration file for FreeBSD/i386 +# +# For more information on this file, please read the handbook section on +# Kernel Configuration Files: +# +# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html +# +# The handbook is also available locally in /usr/share/doc/handbook +# if you've installed the doc distribution, otherwise always see the +# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the +# latest information. +# +# An exhaustive list of options and more detailed explanations of the +# device lines is also present in the ../../conf/NOTES and NOTES files. +# If you are in doubt as to the purpose or necessity of a line, check first +# in NOTES. +# +# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.7.2.2 2006/05/01 00:15:12 scottl Exp $ + +machine i386 +cpu I486_CPU +cpu I586_CPU +cpu I686_CPU +ident pfSense + +# To statically compile in device wiring instead of /boot/device.hints +#hints "GENERIC.hints" # Default places to look for devices. + +makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols + +#FREENAS ADD lines: +options NO_SWAPPING +options HZ=1000 + +#options SCHED_ULE # ULE scheduler +options SCHED_4BSD # 4BSD scheduler +options PREEMPTION # Enable kernel thread preemption +options INET # InterNETworking +options INET6 # IPv6 communications protocols +options FFS # Berkeley Fast Filesystem +options SOFTUPDATES # Enable FFS soft updates support +options UFS_ACL # Support for access control lists +options UFS_DIRHASH # Improve performance on big directories +options MD_ROOT # MD is a potential root device +options NFSCLIENT # Network Filesystem Client +options NFSSERVER # Network Filesystem Server +options NFS_ROOT # NFS usable as /, requires NFSCLIENT +options MSDOSFS # MSDOS Filesystem +options MSDOSFS_LARGE # MSDOS Filesystem for FAT32 > 128GB +options CD9660 # ISO 9660 Filesystem +options PROCFS # Process filesystem (requires PSEUDOFS) +options PSEUDOFS # Pseudo-filesystem framework +options GEOM_GPT # GUID Partition Tables. +options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!] +options COMPAT_FREEBSD4 # Compatible with FreeBSD4 +options COMPAT_FREEBSD5 # Compatible with FreeBSD5 +options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI +options KTRACE # ktrace(1) support +options SYSVSHM # SYSV-style shared memory +options SYSVMSG # SYSV-style message queues +options SYSVSEM # SYSV-style semaphores +options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions +options KBD_INSTALL_CDEV # install a CDEV entry in /dev +options AHC_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~128k to driver. +options AHD_REG_PRETTY_PRINT # Print register bitfields in debug + # output. Adds ~215k to driver. +options ADAPTIVE_GIANT # Giant mutex is adaptive. + +#FreeNAS include ACPI in the kernel: +device acpi # acpi -- Advanced Configuration and Power Management support + +device apic # I/O APIC + +# Bus support. +device eisa +device pci + +# Floppy drives +device fdc + +# ATA and ATAPI devices +device ata +device atadisk # ATA disk drives +device ataraid # ATA RAID drives +device atapicd # ATAPI CDROM drives +device atapifd # ATAPI floppy drives +#device atapifd # ATAPI floppy drives +device atapist # ATAPI tape drives +options ATA_STATIC_ID # Static device numbering + +# SCSI Controllers +device ahb # EISA AHA1742 family +device ahc # AHA2940 and onboard AIC7xxx devices +device ahd # AHA39320/29320 and onboard AIC79xx devices +device amd # AMD 53C974 (Tekram DC-390(T)) +device isp # Qlogic family +device ispfw # Firmware for QLogic HBAs- normally a module +device mpt # LSI-Logic MPT-Fusion +#device ncr # NCR/Symbios Logic +device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') +device trm # Tekram DC395U/UW/F DC315U adapters + +device adv # Advansys SCSI adapters +device adw # Advansys wide SCSI adapters +device aha # Adaptec 154x SCSI adapters +device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. +device bt # Buslogic/Mylex MultiMaster SCSI adapters + +device ncv # NCR 53C500 +device nsp # Workbit Ninja SCSI-3 +device stg # TMC 18C30/18C50 + +#FREENAS ADD SPECIAL DRIVERSAdding special IOI-A100U2W drivers: +device ihb # IOI-A100U2W drivers + +# SCSI peripherals +device scbus # SCSI bus (required for SCSI) +device ch # SCSI media changers +device da # Direct Access (disks) +device sa # Sequential Access (tape etc) +device cd # CD +device pass # Passthrough device (direct SCSI access) +device ses # SCSI Environmental Services (and SAF-TE) + +# RAID controllers interfaced to the SCSI subsystem +device amr # AMI MegaRAID +device arcmsr # Areca SATA II RAID +device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID +device ciss # Compaq Smart RAID 5* +device dpt # DPT Smartcache III, IV - See NOTES for options +device hptmv # Highpoint RocketRAID 182x +device rr232x # Highpoint RocketRAID 232x +device iir # Intel Integrated RAID +device ips # IBM (Adaptec) ServeRAID +device mly # Mylex AcceleRAID/eXtremeRAID +device twa # 3ware 9000 series PATA/SATA RAID + +# RAID controllers +device aac # Adaptec FSA RAID +device aacp # SCSI passthrough for aac (requires CAM) +device ida # Compaq Smart RAID +device mfi # LSI MegaRAID SAS +device mlx # Mylex DAC960 family +device pst # Promise Supertrak SX6000 +device twe # 3ware ATA RAID + +# atkbdc0 controls both the keyboard and the PS/2 mouse +device atkbdc # AT keyboard controller +device atkbd # AT keyboard +device psm # PS/2 mouse + +device kbdmux # keyboard multiplexer + +device vga # VGA video card driver + +device splash # Splash screen and screen saver support + +# syscons is the default console driver, resembling an SCO console +device sc + +# Enable this for the pcvt (VT220 compatible) console driver +#device vt +#options XSERVER # support for X server on a vt console +#options FAT_CURSOR # start with block cursor + +device agp # support several AGP chipsets + +# Power management support (see NOTES for more options) +#device apm +# Add suspend/resume support for the i8254. +device pmtimer + +# PCCARD (PCMCIA) support +# PCMCIA and cardbus bridge support +device cbb # cardbus (yenta) bridge +device pccard # PC Card (16-bit) bus +device cardbus # CardBus (32-bit) bus + +# Serial (COM) ports +device sio # 8250, 16[45]50 based serial ports + +# Parallel port +device ppc +device ppbus # Parallel port bus (required) +device lpt # Printer +device ppi # Parallel port interface device +#device vpo # Requires scbus and da + +# If you've got a "dumb" serial or parallel PCI card that is +# supported by the puc(4) glue driver, uncomment the following +# line to enable it (connects to the sio and/or ppc drivers): +#device puc + +# PCI Ethernet NICs. +device de # DEC/Intel DC21x4x (``Tulip'') +device em # Intel PRO/1000 adapter Gigabit Ethernet Card +device ixgb # Intel PRO/10GbE Ethernet Card +device txp # 3Com 3cR990 (``Typhoon'') +device vx # 3Com 3c590, 3c595 (``Vortex'') + +# PCI Ethernet NICs that use the common MII bus controller code. +# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! +device miibus # MII bus support +device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet +device bfe # Broadcom BCM440x 10/100 Ethernet +device bge # Broadcom BCM570xx Gigabit Ethernet +device dc # DEC/Intel 21143 and various workalikes +device fxp # Intel EtherExpress PRO/100B (82557, 82558) +device lge # Level 1 LXT1001 gigabit Ethernet +device nge # NatSemi DP83820 gigabit Ethernet +device nve # nVidia nForce MCP on-board Ethernet Networking +device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc') +device re # RealTek 8139C+/8169/8169S/8110S +device rl # RealTek 8129/8139 +device sf # Adaptec AIC-6915 (``Starfire'') +device sis # Silicon Integrated Systems SiS 900/SiS 7016 +device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet +device ste # Sundance ST201 (D-Link DFE-550TX) +device ti # Alteon Networks Tigon I/II gigabit Ethernet +device tl # Texas Instruments ThunderLAN +device tx # SMC EtherPower II (83c170 ``EPIC'') +device vge # VIA VT612x gigabit Ethernet +device vr # VIA Rhine, Rhine II +device wb # Winbond W89C840F +device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') + +# ISA Ethernet NICs. pccard NICs included. +device cs # Crystal Semiconductor CS89x0 NIC +# 'device ed' requires 'device miibus' +device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards +device ex # Intel EtherExpress Pro/10 and Pro/10+ +device ep # Etherlink III based cards +device fe # Fujitsu MB8696x based cards +device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. +device le # NE2100, NE32-VL Lance Ethernet cards +device sn # SMC's 9000 series of Ethernet chips +device xe # Xircom pccard Ethernet + +# Wireless NIC cards +device wlan # 802.11 support +device an # Aironet 4500/4800 802.11 wireless NICs. +device awi # BayStack 660 and others +device ral # Ralink Technology RT2500 wireless NICs. +device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. +#device wl # Older non 802.11 Wavelan wireless NIC. + +# Pseudo devices. +device loop # Network loopback +device random # Entropy device +device ether # Ethernet support +device sl # Kernel SLIP +device ppp # Kernel PPP +device tun # Packet tunnel. +device pty # Pseudo-ttys (telnet etc) +device md # Memory "disks" +device gif # IPv6 and IPv4 tunneling +device faith # IPv6-to-IPv4 relaying (translation) + +# The `bpf' device enables the Berkeley Packet Filter. +# Be aware of the administrative consequences of enabling this! +# Note that 'bpf' is required for DHCP. +device bpf # Berkeley packet filter + +# USB support +device uhci # UHCI PCI->USB interface +device ohci # OHCI PCI->USB interface +device ehci # EHCI PCI->USB interface (USB 2.0) +device usb # USB Bus (required) +#device udbp # USB Double Bulk Pipe devices +device ugen # Generic +device uhid # "Human Interface Devices" +device ukbd # Keyboard +device ulpt # Printer +device umass # Disks/Mass storage - Requires scbus and da +device ums # Mouse +device ural # Ralink Technology RT2500USB wireless NICs +device urio # Diamond Rio 500 MP3 player +device uscanner # Scanners +# USB Ethernet, requires miibus +device aue # ADMtek USB Ethernet +device axe # ASIX Electronics USB Ethernet +device cdce # Generic USB over Ethernet +device cue # CATC USB Ethernet +device kue # Kawasaki LSI USB Ethernet +device rue # RealTek RTL8150 USB Ethernet + +# FireWire support +device firewire # FireWire bus code +device sbp # SCSI over FireWire (Requires scbus and da) +device fwe # Ethernet over FireWire (non-standard!) +device fwip + +# pfSense addons + +# Wireless NIC cards +device wlan # 802.11 support +device wlan_wep +device wlan_ccmp +device wlan_tkip +device wlan_xauth +device wlan_acl +device ath +device ath_rate_sample +device ath_hal +device an # Aironet 4500/4800 802.11 wireless NICs. +device awi # BayStack 660 and others +device iwi # Intel PRO/Wireless 2200BG +device ipw +device ral # Ralink Technology RT2500 wireless NICs. +device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. +device wl # Older non 802.11 Wavelan wireless NIC. + +options COMPAT_FREEBSD5 + +options UNIONFS # Union filesystem + +device bktr + +#options IPFIREWALL +#options DUMMYNET +#options IPDIVERT +options IPFIREWALL_DEFAULT_TO_ACCEPT +options IPFIREWALL_FORWARD +options IPFIREWALL_VERBOSE +options IPFIREWALL_VERBOSE_LIMIT + +device carp +device pf +device pflog +device pfsync +device vlan +device gre + +options IPSTEALTH +options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN +options GEOM_UZIP +options GEOM_LABEL + +options INCLUDE_CONFIG_FILE + +#options BRIDGE +options NETGRAPH #netgraph(4) system +options NETGRAPH_ASYNC +options NETGRAPH_BPF +options NETGRAPH_BRIDGE +options NETGRAPH_CISCO +options NETGRAPH_ECHO +options NETGRAPH_ETHER +options NETGRAPH_FRAME_RELAY +options NETGRAPH_HOLE +options NETGRAPH_IFACE +options NETGRAPH_KSOCKET + +options NETGRAPH_LMI +options NETGRAPH_MPPC_ENCRYPTION +options NETGRAPH_ONE2MANY +options NETGRAPH_PPP +options NETGRAPH_PPPOE +options NETGRAPH_PPTPGRE +options NETGRAPH_RFC1490 +options NETGRAPH_SOCKET +options NETGRAPH_TEE +options NETGRAPH_TTY +options NETGRAPH_UI +options NETGRAPH_VJC + +device ubsa +device ucom + +options FAST_IPSEC +#options IPSEC_NAT_T +device enc + +device crypto # core crypto support +device cryptodev # /dev/crypto for access to h/w +device rndtest # FIPS 140-2 entropy tester +device hifn # Hifn 7951, 7781, etc. +options HIFN_DEBUG # enable debugging support: hw.hifn.debug +options HIFN_RNDTEST # enable rndtest support +device ubsec # Broadcom 5501, 5601, 58xx + +options ALTQ +options ALTQ_CBQ +options ALTQ_RED +options ALTQ_RIO +options ALTQ_HFSC +options ALTQ_PRIQ +options ALTQ_NOPCC # Required for SMP builds !! + + +# Bridging +device if_bridge + +options MSGMNB=8192 # max # of bytes in a queue +options MSGMNI=40 # number of message queue identifiers +options MSGSEG=512 # number of message segments per queue +options MSGSSZ=32 # size of a message segment +options MSGTQL=2048 # max messages in system + +device tap +device hme + +# Needed for FreeSBIE 2 +options NULLFS + +# Kbdmux +device kbdmux + +device speaker + +options DEVICE_POLLING + +options ZERO_COPY_SOCKETS + +#device natpt + +device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet + +options TCP_SIGNATURE + +# To make an SMP kernel, the next two lines are needed +options SMP # Symmetric MultiProcessor Kernel +device apic # I/O APIC + +# Allow gmirror to function +options GEOM_MIRROR +options GEOM_MBR + +options PREEMPTION + + |